528 lines
13 KiB
Plaintext
528 lines
13 KiB
Plaintext
/*
|
|
* Keymile KMETER1 Device Tree Source
|
|
*
|
|
* 2008 DENX Software Engineering GmbH
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
/ {
|
|
model = "KMETER1";
|
|
compatible = "keymile,KMETER1";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
aliases {
|
|
ethernet0 = &enet_piggy2;
|
|
ethernet1 = &enet_estar1;
|
|
ethernet2 = &enet_estar2;
|
|
ethernet3 = &enet_eth1;
|
|
ethernet4 = &enet_eth2;
|
|
ethernet5 = &enet_eth3;
|
|
ethernet6 = &enet_eth4;
|
|
serial0 = &serial0;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PowerPC,8360@0 {
|
|
device_type = "cpu";
|
|
reg = <0x0>;
|
|
d-cache-line-size = <32>; // 32 bytes
|
|
i-cache-line-size = <32>; // 32 bytes
|
|
d-cache-size = <32768>; // L1, 32K
|
|
i-cache-size = <32768>; // L1, 32K
|
|
timebase-frequency = <0>; /* Filled in by U-Boot */
|
|
bus-frequency = <0>; /* Filled in by U-Boot */
|
|
clock-frequency = <0>; /* Filled in by U-Boot */
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0 0>; /* Filled in by U-Boot */
|
|
};
|
|
|
|
soc8360@e0000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "soc";
|
|
compatible = "fsl,mpc8360-immr", "simple-bus";
|
|
ranges = <0x0 0xe0000000 0x00200000>;
|
|
reg = <0xe0000000 0x00000200>;
|
|
bus-frequency = <0>; /* Filled in by U-Boot */
|
|
|
|
pmc: power@b00 {
|
|
compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
|
|
reg = <0xb00 0x100 0xa00 0x100>;
|
|
interrupts = <80 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
};
|
|
|
|
i2c@3000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x3000 0x100>;
|
|
interrupts = <14 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
dfsrr;
|
|
};
|
|
|
|
serial0: serial@4500 {
|
|
cell-index = <0>;
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0x4500 0x100>;
|
|
clock-frequency = <264000000>;
|
|
interrupts = <9 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
};
|
|
|
|
dma@82a8 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
|
|
reg = <0x82a8 4>;
|
|
ranges = <0 0x8100 0x1a8>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
cell-index = <0>;
|
|
dma-channel@0 {
|
|
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
|
|
reg = <0 0x80>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
};
|
|
dma-channel@80 {
|
|
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
|
|
reg = <0x80 0x80>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
};
|
|
dma-channel@100 {
|
|
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
|
|
reg = <0x100 0x80>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
};
|
|
dma-channel@180 {
|
|
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
|
|
reg = <0x180 0x28>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
};
|
|
};
|
|
|
|
ipic: pic@700 {
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
compatible = "fsl,pq2pro-pic", "fsl,ipic";
|
|
interrupt-controller;
|
|
reg = <0x700 0x100>;
|
|
};
|
|
|
|
par_io@1400 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x1400 0x100>;
|
|
compatible = "fsl,mpc8360-par_io";
|
|
num-ports = <7>;
|
|
|
|
pio_ucc1: ucc_pin@0 {
|
|
reg = <0>;
|
|
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0 1 3 0 2 0 /* MDIO */
|
|
0 2 1 0 1 0 /* MDC */
|
|
|
|
0 3 1 0 1 0 /* TxD0 */
|
|
0 4 1 0 1 0 /* TxD1 */
|
|
0 5 1 0 1 0 /* TxD2 */
|
|
0 6 1 0 1 0 /* TxD3 */
|
|
0 9 2 0 1 0 /* RxD0 */
|
|
0 10 2 0 1 0 /* RxD1 */
|
|
0 11 2 0 1 0 /* RxD2 */
|
|
0 12 2 0 1 0 /* RxD3 */
|
|
0 7 1 0 1 0 /* TX_EN */
|
|
0 8 1 0 1 0 /* TX_ER */
|
|
0 15 2 0 1 0 /* RX_DV */
|
|
0 16 2 0 1 0 /* RX_ER */
|
|
0 0 2 0 1 0 /* RX_CLK */
|
|
2 9 1 0 3 0 /* GTX_CLK - CLK10 */
|
|
2 8 2 0 1 0 /* GTX125 - CLK9 */
|
|
>;
|
|
};
|
|
|
|
pio_ucc2: ucc_pin@1 {
|
|
reg = <1>;
|
|
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0 1 3 0 2 0 /* MDIO */
|
|
0 2 1 0 1 0 /* MDC */
|
|
|
|
0 17 1 0 1 0 /* TxD0 */
|
|
0 18 1 0 1 0 /* TxD1 */
|
|
0 19 1 0 1 0 /* TxD2 */
|
|
0 20 1 0 1 0 /* TxD3 */
|
|
0 23 2 0 1 0 /* RxD0 */
|
|
0 24 2 0 1 0 /* RxD1 */
|
|
0 25 2 0 1 0 /* RxD2 */
|
|
0 26 2 0 1 0 /* RxD3 */
|
|
0 21 1 0 1 0 /* TX_EN */
|
|
0 22 1 0 1 0 /* TX_ER */
|
|
0 29 2 0 1 0 /* RX_DV */
|
|
0 30 2 0 1 0 /* RX_ER */
|
|
0 31 2 0 1 0 /* RX_CLK */
|
|
2 2 1 0 2 0 /* GTX_CLK - CLK3 */
|
|
2 3 2 0 1 0 /* GTX125 - CLK4 */
|
|
>;
|
|
};
|
|
|
|
pio_ucc4: ucc_pin@3 {
|
|
reg = <3>;
|
|
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0 1 3 0 2 0 /* MDIO */
|
|
0 2 1 0 1 0 /* MDC */
|
|
|
|
1 14 1 0 1 0 /* TxD0 (PB14, out, f1) */
|
|
1 15 1 0 1 0 /* TxD1 (PB15, out, f1) */
|
|
1 20 2 0 1 0 /* RxD0 (PB20, in, f1) */
|
|
1 21 2 0 1 0 /* RxD1 (PB21, in, f1) */
|
|
1 18 1 0 1 0 /* TX_EN (PB18, out, f1) */
|
|
1 26 2 0 1 0 /* RX_DV (PB26, in, f1) */
|
|
1 27 2 0 1 0 /* RX_ER (PB27, in, f1) */
|
|
|
|
2 16 2 0 1 0 /* UCC4_RMII_CLK (CLK17) */
|
|
>;
|
|
};
|
|
|
|
pio_ucc5: ucc_pin@4 {
|
|
reg = <4>;
|
|
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0 1 3 0 2 0 /* MDIO */
|
|
0 2 1 0 1 0 /* MDC */
|
|
|
|
3 0 1 0 1 0 /* TxD0 (PD0, out, f1) */
|
|
3 1 1 0 1 0 /* TxD1 (PD1, out, f1) */
|
|
3 6 2 0 1 0 /* RxD0 (PD6, in, f1) */
|
|
3 7 2 0 1 0 /* RxD1 (PD7, in, f1) */
|
|
3 4 1 0 1 0 /* TX_EN (PD4, out, f1) */
|
|
3 12 2 0 1 0 /* RX_DV (PD12, in, f1) */
|
|
3 13 2 0 1 0 /* RX_ER (PD13, in, f1) */
|
|
>;
|
|
};
|
|
|
|
pio_ucc6: ucc_pin@5 {
|
|
reg = <5>;
|
|
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0 1 3 0 2 0 /* MDIO */
|
|
0 2 1 0 1 0 /* MDC */
|
|
|
|
3 14 1 0 1 0 /* TxD0 (PD14, out, f1) */
|
|
3 15 1 0 1 0 /* TxD1 (PD15, out, f1) */
|
|
3 20 2 0 1 0 /* RxD0 (PD20, in, f1) */
|
|
3 21 2 0 1 0 /* RxD1 (PD21, in, f1) */
|
|
3 18 1 0 1 0 /* TX_EN (PD18, out, f1) */
|
|
3 26 2 0 1 0 /* RX_DV (PD26, in, f1) */
|
|
3 27 2 0 1 0 /* RX_ER (PD27, in, f1) */
|
|
>;
|
|
};
|
|
|
|
pio_ucc7: ucc_pin@6 {
|
|
reg = <6>;
|
|
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0 1 3 0 2 0 /* MDIO */
|
|
0 2 1 0 1 0 /* MDC */
|
|
|
|
4 0 1 0 1 0 /* TxD0 (PE0, out, f1) */
|
|
4 1 1 0 1 0 /* TxD1 (PE1, out, f1) */
|
|
4 6 2 0 1 0 /* RxD0 (PE6, in, f1) */
|
|
4 7 2 0 1 0 /* RxD1 (PE7, in, f1) */
|
|
4 4 1 0 1 0 /* TX_EN (PE4, out, f1) */
|
|
4 12 2 0 1 0 /* RX_DV (PE12, in, f1) */
|
|
4 13 2 0 1 0 /* RX_ER (PE13, in, f1) */
|
|
>;
|
|
};
|
|
|
|
pio_ucc8: ucc_pin@7 {
|
|
reg = <7>;
|
|
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0 1 3 0 2 0 /* MDIO */
|
|
0 2 1 0 1 0 /* MDC */
|
|
|
|
4 14 1 0 2 0 /* TxD0 (PE14, out, f2) */
|
|
4 15 1 0 1 0 /* TxD1 (PE15, out, f1) */
|
|
4 20 2 0 1 0 /* RxD0 (PE20, in, f1) */
|
|
4 21 2 0 1 0 /* RxD1 (PE21, in, f1) */
|
|
4 18 1 0 1 0 /* TX_EN (PE18, out, f1) */
|
|
4 26 2 0 1 0 /* RX_DV (PE26, in, f1) */
|
|
4 27 2 0 1 0 /* RX_ER (PE27, in, f1) */
|
|
|
|
2 15 2 0 1 0 /* UCCx_RMII_CLK (CLK16) */
|
|
>;
|
|
};
|
|
|
|
};
|
|
|
|
qe@100000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,qe";
|
|
ranges = <0x0 0x100000 0x100000>;
|
|
reg = <0x100000 0x480>;
|
|
clock-frequency = <0>; /* Filled in by U-Boot */
|
|
brg-frequency = <0>; /* Filled in by U-Boot */
|
|
bus-frequency = <0>; /* Filled in by U-Boot */
|
|
|
|
muram@10000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,qe-muram", "fsl,cpm-muram";
|
|
ranges = <0x0 0x00010000 0x0000c000>;
|
|
|
|
data-only@0 {
|
|
compatible = "fsl,qe-muram-data",
|
|
"fsl,cpm-muram-data";
|
|
reg = <0x0 0xc000>;
|
|
};
|
|
};
|
|
|
|
/* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
|
|
enet_estar1: ucc@2000 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <1>;
|
|
reg = <0x2000 0x200>;
|
|
interrupts = <32>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk9";
|
|
phy-handle = <&phy_estar1>;
|
|
phy-connection-type = "rgmii-id";
|
|
pio-handle = <&pio_ucc1>;
|
|
};
|
|
|
|
/* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
|
|
enet_estar2: ucc@3000 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <2>;
|
|
reg = <0x3000 0x200>;
|
|
interrupts = <33>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk4";
|
|
phy-handle = <&phy_estar2>;
|
|
phy-connection-type = "rgmii-id";
|
|
pio-handle = <&pio_ucc2>;
|
|
};
|
|
|
|
/* Piggy2 (UCC4, MDIO 0x00, RMII) */
|
|
enet_piggy2: ucc@3200 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <4>;
|
|
reg = <0x3200 0x200>;
|
|
interrupts = <35>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk17";
|
|
phy-handle = <&phy_piggy2>;
|
|
phy-connection-type = "rmii";
|
|
pio-handle = <&pio_ucc4>;
|
|
};
|
|
|
|
/* Eth-1 (UCC5, MDIO 0x08, RMII) */
|
|
enet_eth1: ucc@2400 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <5>;
|
|
reg = <0x2400 0x200>;
|
|
interrupts = <40>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk16";
|
|
phy-handle = <&phy_eth1>;
|
|
phy-connection-type = "rmii";
|
|
pio-handle = <&pio_ucc5>;
|
|
};
|
|
|
|
/* Eth-2 (UCC6, MDIO 0x09, RMII) */
|
|
enet_eth2: ucc@3400 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <6>;
|
|
reg = <0x3400 0x200>;
|
|
interrupts = <41>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk16";
|
|
phy-handle = <&phy_eth2>;
|
|
phy-connection-type = "rmii";
|
|
pio-handle = <&pio_ucc6>;
|
|
};
|
|
|
|
/* Eth-3 (UCC7, MDIO 0x0a, RMII) */
|
|
enet_eth3: ucc@2600 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <7>;
|
|
reg = <0x2600 0x200>;
|
|
interrupts = <42>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk16";
|
|
phy-handle = <&phy_eth3>;
|
|
phy-connection-type = "rmii";
|
|
pio-handle = <&pio_ucc7>;
|
|
};
|
|
|
|
/* Eth-4 (UCC8, MDIO 0x0b, RMII) */
|
|
enet_eth4: ucc@3600 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <8>;
|
|
reg = <0x3600 0x200>;
|
|
interrupts = <43>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk16";
|
|
phy-handle = <&phy_eth4>;
|
|
phy-connection-type = "rmii";
|
|
pio-handle = <&pio_ucc8>;
|
|
};
|
|
|
|
mdio@3320 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x3320 0x18>;
|
|
compatible = "fsl,ucc-mdio";
|
|
|
|
/* Piggy2 (UCC4, MDIO 0x00, RMII) */
|
|
phy_piggy2: ethernet-phy@00 {
|
|
reg = <0x0>;
|
|
};
|
|
|
|
/* Eth-1 (UCC5, MDIO 0x08, RMII) */
|
|
phy_eth1: ethernet-phy@08 {
|
|
reg = <0x08>;
|
|
};
|
|
|
|
/* Eth-2 (UCC6, MDIO 0x09, RMII) */
|
|
phy_eth2: ethernet-phy@09 {
|
|
reg = <0x09>;
|
|
};
|
|
|
|
/* Eth-3 (UCC7, MDIO 0x0a, RMII) */
|
|
phy_eth3: ethernet-phy@0a {
|
|
reg = <0x0a>;
|
|
};
|
|
|
|
/* Eth-4 (UCC8, MDIO 0x0b, RMII) */
|
|
phy_eth4: ethernet-phy@0b {
|
|
reg = <0x0b>;
|
|
};
|
|
|
|
/* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
|
|
phy_estar1: ethernet-phy@10 {
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <17 0x8>;
|
|
reg = <0x10>;
|
|
};
|
|
|
|
/* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
|
|
phy_estar2: ethernet-phy@11 {
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <18 0x8>;
|
|
reg = <0x11>;
|
|
};
|
|
};
|
|
|
|
qeic: interrupt-controller@80 {
|
|
interrupt-controller;
|
|
compatible = "fsl,qe-ic";
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x80 0x80>;
|
|
interrupts = <32 8 33 8>;
|
|
interrupt-parent = <&ipic>;
|
|
};
|
|
};
|
|
};
|
|
|
|
localbus@e0005000 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
|
|
"simple-bus";
|
|
reg = <0xe0005000 0xd8>;
|
|
ranges = <0 0 0xf0000000 0x04000000>; /* Filled in by U-Boot */
|
|
|
|
flash@f0000000,0 {
|
|
compatible = "cfi-flash";
|
|
/*
|
|
* The Intel P30 chip has 2 non-identical chips on
|
|
* one die, so we need to define 2 seperate regions
|
|
* that are scanned by physmap_of independantly.
|
|
*/
|
|
reg = <0 0x00000000 0x02000000
|
|
0 0x02000000 0x02000000>; /* Filled in by U-Boot */
|
|
bank-width = <2>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0 0x40000>;
|
|
};
|
|
partition@40000 {
|
|
label = "env";
|
|
reg = <0x40000 0x40000>;
|
|
};
|
|
partition@80000 {
|
|
label = "dtb";
|
|
reg = <0x80000 0x20000>;
|
|
};
|
|
partition@a0000 {
|
|
label = "kernel";
|
|
reg = <0xa0000 0x300000>;
|
|
};
|
|
partition@3a0000 {
|
|
label = "ramdisk";
|
|
reg = <0x3a0000 0x800000>;
|
|
};
|
|
partition@ba0000 {
|
|
label = "user";
|
|
reg = <0xba0000 0x3460000>;
|
|
};
|
|
};
|
|
};
|
|
};
|