2406 lines
73 KiB
Plaintext
2406 lines
73 KiB
Plaintext
# SPDX-License-Identifier: GPL-2.0-only
|
|
#
|
|
# Hardware monitoring chip drivers configuration
|
|
#
|
|
|
|
menuconfig HWMON
|
|
tristate "Hardware Monitoring support"
|
|
depends on HAS_IOMEM
|
|
default y
|
|
help
|
|
Hardware monitoring devices let you monitor the hardware health
|
|
of a system. Most modern motherboards include such a device. It
|
|
can include temperature sensors, voltage sensors, fan speed
|
|
sensors and various additional features such as the ability to
|
|
control the speed of the fans. If you want this support you
|
|
should say Y here and also to the specific driver(s) for your
|
|
sensors chip(s) below.
|
|
|
|
To find out which specific driver(s) you need, use the
|
|
sensors-detect script from the lm_sensors package. Read
|
|
<file:Documentation/hwmon/userspace-tools.rst> for details.
|
|
|
|
This support can also be built as a module. If so, the module
|
|
will be called hwmon.
|
|
|
|
if HWMON
|
|
|
|
config HWMON_VID
|
|
tristate
|
|
|
|
config HWMON_DEBUG_CHIP
|
|
bool "Hardware Monitoring Chip debugging messages"
|
|
help
|
|
Say Y here if you want the I2C chip drivers to produce a bunch of
|
|
debug messages to the system log. Select this if you are having
|
|
a problem with I2C support and want to see more of what is going
|
|
on.
|
|
|
|
comment "Native drivers"
|
|
|
|
config SENSORS_ABITUGURU
|
|
tristate "Abit uGuru (rev 1 & 2)"
|
|
depends on X86 && DMI
|
|
help
|
|
If you say yes here you get support for the sensor part of the first
|
|
and second revision of the Abit uGuru chip. The voltage and frequency
|
|
control parts of the Abit uGuru are not supported. The Abit uGuru
|
|
chip can be found on Abit uGuru featuring motherboards (most modern
|
|
Abit motherboards from before end 2005). For more info and a list
|
|
of which motherboards have which revision see
|
|
Documentation/hwmon/abituguru.rst
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called abituguru.
|
|
|
|
config SENSORS_ABITUGURU3
|
|
tristate "Abit uGuru (rev 3)"
|
|
depends on X86 && DMI
|
|
help
|
|
If you say yes here you get support for the sensor part of the
|
|
third revision of the Abit uGuru chip. Only reading the sensors
|
|
and their settings is supported. The third revision of the Abit
|
|
uGuru chip can be found on recent Abit motherboards (since end
|
|
2005). For more info and a list of which motherboards have which
|
|
revision see Documentation/hwmon/abituguru3.rst
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called abituguru3.
|
|
|
|
config SENSORS_SMPRO
|
|
tristate "Ampere's Altra SMpro hardware monitoring driver"
|
|
depends on MFD_SMPRO
|
|
help
|
|
If you say yes here you get support for the thermal, voltage,
|
|
current and power sensors of Ampere's Altra processor family SoC
|
|
with SMpro co-processor.
|
|
|
|
config SENSORS_AD7314
|
|
tristate "Analog Devices AD7314 and compatibles"
|
|
depends on SPI
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
AD7314, ADT7301 and ADT7302 temperature sensors.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ad7314.
|
|
|
|
config SENSORS_AD7414
|
|
tristate "Analog Devices AD7414"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
AD7414 temperature monitoring chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ad7414.
|
|
|
|
config SENSORS_AD7418
|
|
tristate "Analog Devices AD7416, AD7417 and AD7418"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
AD7416, AD7417 and AD7418 temperature monitoring chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ad7418.
|
|
|
|
config SENSORS_ADM1021
|
|
tristate "Analog Devices ADM1021 and compatibles"
|
|
depends on I2C
|
|
depends on SENSORS_LM90=n
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM1021
|
|
and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
|
|
Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm1021.
|
|
|
|
config SENSORS_ADM1025
|
|
tristate "Analog Devices ADM1025 and compatibles"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM1025
|
|
and Philips NE1619 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm1025.
|
|
|
|
config SENSORS_ADM1026
|
|
tristate "Analog Devices ADM1026 and compatibles"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM1026
|
|
sensor chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm1026.
|
|
|
|
config SENSORS_ADM1029
|
|
tristate "Analog Devices ADM1029"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM1029
|
|
sensor chip.
|
|
Very rare chip, please let us know you use it.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm1029.
|
|
|
|
config SENSORS_ADM1031
|
|
tristate "Analog Devices ADM1031 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM1031
|
|
and ADM1030 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm1031.
|
|
|
|
config SENSORS_ADM1177
|
|
tristate "Analog Devices ADM1177 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM1177
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm1177.
|
|
|
|
config SENSORS_ADM9240
|
|
tristate "Analog Devices ADM9240 and compatibles"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM9240,
|
|
Dallas DS1780, National Semiconductor LM81 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm9240.
|
|
|
|
config SENSORS_ADT7X10
|
|
tristate
|
|
select REGMAP
|
|
help
|
|
This module contains common code shared by the ADT7310/ADT7320 and
|
|
ADT7410/ADT7420 temperature monitoring chip drivers.
|
|
|
|
If built as a module, the module will be called adt7x10.
|
|
|
|
config SENSORS_ADT7310
|
|
tristate "Analog Devices ADT7310/ADT7320"
|
|
depends on SPI_MASTER
|
|
select SENSORS_ADT7X10
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
ADT7310 and ADT7320 temperature monitoring chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adt7310.
|
|
|
|
config SENSORS_ADT7410
|
|
tristate "Analog Devices ADT7410/ADT7420"
|
|
depends on I2C
|
|
select SENSORS_ADT7X10
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
ADT7410 and ADT7420 temperature monitoring chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adt7410.
|
|
|
|
config SENSORS_ADT7411
|
|
tristate "Analog Devices ADT7411"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
ADT7411 voltage and temperature monitoring chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adt7411.
|
|
|
|
config SENSORS_ADT7462
|
|
tristate "Analog Devices ADT7462"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
ADT7462 temperature monitoring chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adt7462.
|
|
|
|
config SENSORS_ADT7470
|
|
tristate "Analog Devices ADT7470"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
ADT7470 temperature monitoring chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adt7470.
|
|
|
|
config SENSORS_ADT7475
|
|
tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
|
|
chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adt7475.
|
|
|
|
config SENSORS_AHT10
|
|
tristate "Aosong AHT10"
|
|
depends on I2C
|
|
help
|
|
If you say yes here, you get support for the Aosong AHT10
|
|
temperature and humidity sensors
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called aht10.
|
|
|
|
config SENSORS_AQUACOMPUTER_D5NEXT
|
|
tristate "Aquacomputer D5 Next, Octo, Quadro, Farbwerk, Farbwerk 360, High Flow Next"
|
|
depends on USB_HID
|
|
select CRC16
|
|
help
|
|
If you say yes here you get support for sensors and fans of
|
|
the Aquacomputer D5 Next watercooling pump, Octo and Quadro fan
|
|
controllers, Farbwerk and Farbwerk 360 RGB controllers, High Flow
|
|
Next sensor, where available.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called aquacomputer_d5next.
|
|
|
|
config SENSORS_AS370
|
|
tristate "Synaptics AS370 SoC hardware monitoring driver"
|
|
help
|
|
If you say yes here you get support for the PVT sensors of
|
|
the Synaptics AS370 SoC
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called as370-hwmon.
|
|
|
|
|
|
config SENSORS_ASC7621
|
|
tristate "Andigilog aSC7621"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the aSC7621
|
|
family of SMBus sensors chip found on most Intel X38, X48, X58,
|
|
945, 965 and 975 desktop boards. Currently supported chips:
|
|
aSC7621
|
|
aSC7621a
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called asc7621.
|
|
|
|
config SENSORS_AXI_FAN_CONTROL
|
|
tristate "Analog Devices FAN Control HDL Core driver"
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
AXI HDL FAN monitoring core.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called axi-fan-control
|
|
|
|
config SENSORS_K8TEMP
|
|
tristate "AMD Athlon64/FX or Opteron temperature sensor"
|
|
depends on X86 && PCI
|
|
help
|
|
If you say yes here you get support for the temperature
|
|
sensor(s) inside your CPU. Supported is whole AMD K8
|
|
microarchitecture. Please note that you will need at least
|
|
lm-sensors 2.10.1 for proper userspace support.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called k8temp.
|
|
|
|
config SENSORS_K10TEMP
|
|
tristate "AMD Family 10h+ temperature sensor"
|
|
depends on X86 && PCI && AMD_NB
|
|
help
|
|
If you say yes here you get support for the temperature
|
|
sensor(s) inside your CPU. Supported are later revisions of
|
|
the AMD Family 10h and all revisions of the AMD Family 11h,
|
|
12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo)
|
|
and 16h (Kabini/Mullins) microarchitectures.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called k10temp.
|
|
|
|
config SENSORS_FAM15H_POWER
|
|
tristate "AMD Family 15h processor power"
|
|
depends on X86 && PCI && CPU_SUP_AMD
|
|
help
|
|
If you say yes here you get support for processor power
|
|
information of your AMD family 15h CPU.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called fam15h_power.
|
|
|
|
config SENSORS_APPLESMC
|
|
tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
|
|
depends on INPUT && X86
|
|
select NEW_LEDS
|
|
select LEDS_CLASS
|
|
help
|
|
This driver provides support for the Apple System Management
|
|
Controller, which provides an accelerometer (Apple Sudden Motion
|
|
Sensor), light sensors, temperature sensors, keyboard backlight
|
|
control and fan control.
|
|
|
|
Only Intel-based Apple's computers are supported (MacBook Pro,
|
|
MacBook, MacMini).
|
|
|
|
Data from the different sensors, keyboard backlight control and fan
|
|
control are accessible via sysfs.
|
|
|
|
This driver also provides an absolute input class device, allowing
|
|
the laptop to act as a pinball machine-esque joystick.
|
|
|
|
Say Y here if you have an applicable laptop and want to experience
|
|
the awesome power of applesmc.
|
|
|
|
config SENSORS_ARM_SCMI
|
|
tristate "ARM SCMI Sensors"
|
|
depends on ARM_SCMI_PROTOCOL
|
|
depends on THERMAL || !THERMAL_OF
|
|
help
|
|
This driver provides support for temperature, voltage, current
|
|
and power sensors available on SCMI based platforms. The actual
|
|
number and type of sensors exported depend on the platform.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called scmi-hwmon.
|
|
|
|
config SENSORS_ARM_SCPI
|
|
tristate "ARM SCPI Sensors"
|
|
depends on ARM_SCPI_PROTOCOL
|
|
depends on THERMAL || !THERMAL_OF
|
|
help
|
|
This driver provides support for temperature, voltage, current
|
|
and power sensors available on ARM Ltd's SCP based platforms. The
|
|
actual number and type of sensors exported depend on the platform.
|
|
|
|
config SENSORS_ASB100
|
|
tristate "Asus ASB100 Bach"
|
|
depends on (X86 || COMPILE_TEST) && I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the ASB100 Bach sensor
|
|
chip found on some Asus mainboards.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called asb100.
|
|
|
|
config SENSORS_ASPEED
|
|
tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver"
|
|
depends on ARCH_ASPEED || COMPILE_TEST
|
|
depends on THERMAL || THERMAL=n
|
|
select REGMAP
|
|
help
|
|
This driver provides support for ASPEED AST2400/AST2500 PWM
|
|
and Fan Tacho controllers.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called aspeed_pwm_tacho.
|
|
|
|
config SENSORS_ATXP1
|
|
tristate "Attansic ATXP1 VID controller"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the Attansic ATXP1 VID
|
|
controller.
|
|
|
|
If your board have such a chip, you are able to control your CPU
|
|
core and other voltages.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called atxp1.
|
|
|
|
config SENSORS_BT1_PVT
|
|
tristate "Baikal-T1 Process, Voltage, Temperature sensor driver"
|
|
depends on MIPS_BAIKAL_T1 || COMPILE_TEST
|
|
select POLYNOMIAL
|
|
help
|
|
If you say yes here you get support for Baikal-T1 PVT sensor
|
|
embedded into the SoC.
|
|
|
|
This driver can also be built as a module. If so, the module will be
|
|
called bt1-pvt.
|
|
|
|
config SENSORS_BT1_PVT_ALARMS
|
|
bool "Enable Baikal-T1 PVT sensor alarms"
|
|
depends on SENSORS_BT1_PVT
|
|
help
|
|
Baikal-T1 PVT IP-block provides threshold registers for each
|
|
supported sensor. But the corresponding interrupts might be
|
|
generated by the thresholds comparator only in synchronization with
|
|
a data conversion. Additionally there is only one sensor data can
|
|
be converted at a time. All of these makes the interface impossible
|
|
to be used for the hwmon alarms implementation without periodic
|
|
switch between the PVT sensors. By default the data conversion is
|
|
performed on demand from the user-space. If this config is enabled
|
|
the data conversion will be periodically performed and the data will be
|
|
saved in the internal driver cache.
|
|
|
|
config SENSORS_CORSAIR_CPRO
|
|
tristate "Corsair Commander Pro controller"
|
|
depends on HID
|
|
help
|
|
If you say yes here you get support for the Corsair Commander Pro
|
|
controller.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called corsair-cpro.
|
|
|
|
config SENSORS_CORSAIR_PSU
|
|
tristate "Corsair PSU HID controller"
|
|
depends on HID
|
|
help
|
|
If you say yes here you get support for Corsair PSUs with a HID
|
|
interface.
|
|
Currently this driver supports the (RM/HX)550i, (RM/HX)650i,
|
|
(RM/HX)750i, (RM/HX)850i, (RM/HX)1000i and HX1200i power supplies
|
|
by Corsair.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called corsair-psu.
|
|
|
|
config SENSORS_DRIVETEMP
|
|
tristate "Hard disk drives with temperature sensors"
|
|
depends on SCSI && ATA
|
|
help
|
|
If you say yes you get support for the temperature sensor on
|
|
hard disk drives.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called drivetemp.
|
|
|
|
config SENSORS_DS620
|
|
tristate "Dallas Semiconductor DS620"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Dallas Semiconductor
|
|
DS620 sensor chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ds620.
|
|
|
|
config SENSORS_DS1621
|
|
tristate "Dallas Semiconductor DS1621 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Dallas Semiconductor/Maxim
|
|
Integrated DS1621 sensor chips and compatible models including:
|
|
|
|
- Dallas Semiconductor DS1625
|
|
- Maxim Integrated DS1631
|
|
- Maxim Integrated DS1721
|
|
- Maxim Integrated DS1731
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ds1621.
|
|
|
|
config SENSORS_DELL_SMM
|
|
tristate "Dell laptop SMM BIOS hwmon driver"
|
|
depends on X86
|
|
imply THERMAL
|
|
help
|
|
This hwmon driver adds support for reporting temperature of different
|
|
sensors and controls the fans on Dell laptops via System Management
|
|
Mode provided by Dell BIOS.
|
|
|
|
When option I8K is also enabled this driver provides legacy /proc/i8k
|
|
userspace interface for i8kutils package.
|
|
|
|
config I8K
|
|
bool "Legacy /proc/i8k interface of Dell laptop SMM BIOS hwmon driver"
|
|
depends on SENSORS_DELL_SMM
|
|
depends on PROC_FS
|
|
help
|
|
This option enables the legacy /proc/i8k userspace interface of the
|
|
dell-smm-hwmon driver. The character file /proc/i8k exposes the BIOS
|
|
version, temperatures and allows control of fan speeds of some Dell
|
|
laptops. Sometimes it also reports power and hotkey status.
|
|
|
|
This interface is required to run programs from the i8kutils package.
|
|
|
|
Say Y if you intend to run userspace programs that use this interface.
|
|
Say N otherwise.
|
|
|
|
config SENSORS_DA9052_ADC
|
|
tristate "Dialog DA9052/DA9053 ADC"
|
|
depends on PMIC_DA9052
|
|
help
|
|
Say y here to support the ADC found on Dialog Semiconductor
|
|
DA9052-BC and DA9053-AA/Bx PMICs.
|
|
|
|
This driver can also be built as module. If so, the module
|
|
will be called da9052-hwmon.
|
|
|
|
config SENSORS_DA9055
|
|
tristate "Dialog Semiconductor DA9055 ADC"
|
|
depends on MFD_DA9055
|
|
help
|
|
If you say yes here you get support for ADC on the Dialog
|
|
Semiconductor DA9055 PMIC.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called da9055-hwmon.
|
|
|
|
config SENSORS_I5K_AMB
|
|
tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
|
|
depends on PCI
|
|
help
|
|
If you say yes here you get support for FB-DIMM AMB temperature
|
|
monitoring chips on systems with the Intel 5000 series chipset.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i5k_amb.
|
|
|
|
config SENSORS_SPARX5
|
|
tristate "Sparx5 SoC temperature sensor"
|
|
depends on ARCH_SPARX5 || COMPILE_TEST
|
|
help
|
|
If you say yes here you get support for temperature monitoring
|
|
with the Microchip Sparx5 SoC.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sparx5-temp.
|
|
|
|
config SENSORS_F71805F
|
|
tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
|
|
depends on !PPC
|
|
help
|
|
If you say yes here you get support for hardware monitoring
|
|
features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
|
|
Super-I/O chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called f71805f.
|
|
|
|
config SENSORS_F71882FG
|
|
tristate "Fintek F71882FG and compatibles"
|
|
depends on !PPC
|
|
help
|
|
If you say yes here you get support for hardware monitoring
|
|
features of many Fintek Super-I/O (LPC) chips. The currently
|
|
supported chips are:
|
|
F71808E/A
|
|
F71858FG
|
|
F71862FG
|
|
F71863FG
|
|
F71869F/E/A
|
|
F71882FG
|
|
F71883FG
|
|
F71889FG/ED/A
|
|
F8000
|
|
F81801U
|
|
F81865F
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called f71882fg.
|
|
|
|
config SENSORS_F75375S
|
|
tristate "Fintek F75375S/SP, F75373 and F75387"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for hardware monitoring
|
|
features of the Fintek F75375S/SP, F75373 and F75387
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called f75375s.
|
|
|
|
config SENSORS_GSC
|
|
tristate "Gateworks System Controller ADC"
|
|
depends on MFD_GATEWORKS_GSC
|
|
help
|
|
Support for the Gateworks System Controller A/D converters.
|
|
|
|
To compile this driver as a module, choose M here:
|
|
the module will be called gsc-hwmon.
|
|
|
|
config SENSORS_MC13783_ADC
|
|
tristate "Freescale MC13783/MC13892 ADC"
|
|
depends on MFD_MC13XXX
|
|
help
|
|
Support for the A/D converter on MC13783 and MC13892 PMIC.
|
|
|
|
config SENSORS_FSCHMD
|
|
tristate "Fujitsu Siemens Computers sensor chips"
|
|
depends on (X86 || COMPILE_TEST) && I2C
|
|
help
|
|
If you say yes here you get support for the following Fujitsu
|
|
Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
|
|
Heimdall, Heracles, Hades and Syleus including support for the
|
|
integrated watchdog.
|
|
|
|
This is a merged driver for FSC sensor chips replacing the fscpos,
|
|
fscscy and fscher drivers and adding support for several other FSC
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called fschmd.
|
|
|
|
config SENSORS_FTSTEUTATES
|
|
tristate "Fujitsu Technology Solutions sensor chip Teutates"
|
|
depends on I2C && WATCHDOG
|
|
select WATCHDOG_CORE
|
|
help
|
|
If you say yes here you get support for the Fujitsu Technology
|
|
Solutions (FTS) sensor chip "Teutates" including support for
|
|
the integrated watchdog.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ftsteutates.
|
|
|
|
config SENSORS_GL518SM
|
|
tristate "Genesys Logic GL518SM"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Genesys Logic GL518SM
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called gl518sm.
|
|
|
|
config SENSORS_GL520SM
|
|
tristate "Genesys Logic GL520SM"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for Genesys Logic GL520SM
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called gl520sm.
|
|
|
|
config SENSORS_G760A
|
|
tristate "GMT G760A"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Global Mixed-mode
|
|
Technology Inc G760A fan speed PWM controller chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called g760a.
|
|
|
|
config SENSORS_G762
|
|
tristate "GMT G762 and G763"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Global Mixed-mode
|
|
Technology Inc G762 and G763 fan speed PWM controller chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called g762.
|
|
|
|
config SENSORS_GPIO_FAN
|
|
tristate "GPIO fan"
|
|
depends on OF_GPIO
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
depends on THERMAL || THERMAL=n
|
|
help
|
|
If you say yes here you get support for fans connected to GPIO lines.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called gpio-fan.
|
|
|
|
config SENSORS_HIH6130
|
|
tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Honeywell Humidicon
|
|
HIH-6130 and HIH-6131 Humidicon humidity sensors.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called hih6130.
|
|
|
|
config SENSORS_IBMAEM
|
|
tristate "IBM Active Energy Manager temperature/power sensors and control"
|
|
select IPMI_SI
|
|
depends on IPMI_HANDLER
|
|
help
|
|
If you say yes here you get support for the temperature and
|
|
power sensors and capping hardware in various IBM System X
|
|
servers that support Active Energy Manager. This includes
|
|
the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
|
|
and certain HC10/HS2x/LS2x/QS2x blades.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ibmaem.
|
|
|
|
config SENSORS_IBMPEX
|
|
tristate "IBM PowerExecutive temperature/power sensors"
|
|
select IPMI_SI
|
|
depends on IPMI_HANDLER
|
|
help
|
|
If you say yes here you get support for the temperature and
|
|
power sensors in various IBM System X servers that support
|
|
PowerExecutive. So far this includes the x3350, x3550, x3650,
|
|
x3655, and x3755; the x3800, x3850, and x3950 models that have
|
|
PCI Express; and some of the HS2x, LS2x, and QS2x blades.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ibmpex.
|
|
|
|
config SENSORS_IBMPOWERNV
|
|
tristate "IBM POWERNV platform sensors"
|
|
depends on PPC_POWERNV
|
|
default y
|
|
help
|
|
If you say yes here you get support for the temperature/fan/power
|
|
sensors on your PowerNV platform.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ibmpowernv.
|
|
|
|
config SENSORS_IIO_HWMON
|
|
tristate "Hwmon driver that uses channels specified via iio maps"
|
|
depends on IIO
|
|
help
|
|
This is a platform driver that in combination with a suitable
|
|
map allows IIO devices to provide basic hwmon functionality
|
|
for those channels specified in the map. This map can be provided
|
|
either via platform data or the device tree bindings.
|
|
|
|
config SENSORS_I5500
|
|
tristate "Intel 5500/5520/X58 temperature sensor"
|
|
depends on X86 && PCI
|
|
help
|
|
If you say yes here you get support for the temperature
|
|
sensor inside the Intel 5500, 5520 and X58 chipsets.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i5500_temp.
|
|
|
|
config SENSORS_CORETEMP
|
|
tristate "Intel Core/Core2/Atom temperature sensor"
|
|
depends on X86
|
|
help
|
|
If you say yes here you get support for the temperature
|
|
sensor inside your CPU. Most of the family 6 CPUs
|
|
are supported. Check Documentation/hwmon/coretemp.rst for details.
|
|
|
|
config SENSORS_IT87
|
|
tristate "ITE IT87xx and compatibles"
|
|
depends on !PPC
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F,
|
|
IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, IT8758E,
|
|
IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E,
|
|
IT8603E, IT8620E, IT8623E, and IT8628E sensor chips, and the SiS950
|
|
clone.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called it87.
|
|
|
|
config SENSORS_JC42
|
|
tristate "JEDEC JC42.4 compliant memory module temperature sensors"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here, you get support for JEDEC JC42.4 compliant
|
|
temperature sensors, which are used on many DDR3 memory modules for
|
|
mobile devices and servers. Support will include, but not be limited
|
|
to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
|
|
MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98,
|
|
STTS424(E), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called jc42.
|
|
|
|
config SENSORS_POWR1220
|
|
tristate "Lattice POWR1220 Power Monitoring"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get access to the hardware monitoring
|
|
functions of the Lattice POWR1220 isp Power Supply Monitoring,
|
|
Sequencing and Margining Controller.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called powr1220.
|
|
|
|
config SENSORS_LAN966X
|
|
tristate "Microchip LAN966x Hardware Monitoring"
|
|
depends on SOC_LAN966 || COMPILE_TEST
|
|
select REGMAP
|
|
select POLYNOMIAL
|
|
help
|
|
If you say yes here you get support for temperature monitoring
|
|
on the Microchip LAN966x SoC.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lan966x-hwmon.
|
|
|
|
config SENSORS_LINEAGE
|
|
tristate "Lineage Compact Power Line Power Entry Module"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Lineage Compact Power Line
|
|
series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
|
|
CP2000DC, CP2725, and others.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lineage-pem.
|
|
|
|
config SENSORS_LOCHNAGAR
|
|
tristate "Lochnagar Hardware Monitor"
|
|
depends on MFD_LOCHNAGAR
|
|
help
|
|
If you say yes here you get support for Lochnagar 2 temperature,
|
|
voltage and current sensors abilities.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lochnagar-hwmon.
|
|
|
|
config SENSORS_LTC2945
|
|
tristate "Linear Technology LTC2945"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for Linear Technology LTC2945
|
|
I2C System Monitor.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called ltc2945.
|
|
|
|
config SENSORS_LTC2947
|
|
tristate
|
|
|
|
config SENSORS_LTC2947_I2C
|
|
tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over I2C"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
select SENSORS_LTC2947
|
|
help
|
|
If you say yes here you get support for Linear Technology LTC2947
|
|
I2C High Precision Power and Energy Monitor
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called ltc2947-i2c.
|
|
|
|
config SENSORS_LTC2947_SPI
|
|
tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over SPI"
|
|
depends on SPI_MASTER
|
|
select REGMAP_SPI
|
|
select SENSORS_LTC2947
|
|
help
|
|
If you say yes here you get support for Linear Technology LTC2947
|
|
SPI High Precision Power and Energy Monitor
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called ltc2947-spi.
|
|
|
|
config SENSORS_LTC2990
|
|
tristate "Linear Technology LTC2990"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Linear Technology LTC2990
|
|
I2C System Monitor. The LTC2990 supports a combination of voltage,
|
|
current and temperature monitoring.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called ltc2990.
|
|
|
|
config SENSORS_LTC2992
|
|
tristate "Linear Technology LTC2992"
|
|
depends on I2C
|
|
depends on GPIOLIB
|
|
help
|
|
If you say yes here you get support for Linear Technology LTC2992
|
|
I2C System Monitor. The LTC2992 measures current, voltage, and
|
|
power of two supplies.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called ltc2992.
|
|
|
|
config SENSORS_LTC4151
|
|
tristate "Linear Technology LTC4151"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Linear Technology LTC4151
|
|
High Voltage I2C Current and Voltage Monitor interface.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called ltc4151.
|
|
|
|
config SENSORS_LTC4215
|
|
tristate "Linear Technology LTC4215"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Linear Technology LTC4215
|
|
Hot Swap Controller I2C interface.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called ltc4215.
|
|
|
|
config SENSORS_LTC4222
|
|
tristate "Linear Technology LTC4222"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for Linear Technology LTC4222
|
|
Dual Hot Swap Controller I2C interface.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called ltc4222.
|
|
|
|
config SENSORS_LTC4245
|
|
tristate "Linear Technology LTC4245"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Linear Technology LTC4245
|
|
Multiple Supply Hot Swap Controller I2C interface.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called ltc4245.
|
|
|
|
config SENSORS_LTC4260
|
|
tristate "Linear Technology LTC4260"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for Linear Technology LTC4260
|
|
Positive Voltage Hot Swap Controller I2C interface.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called ltc4260.
|
|
|
|
config SENSORS_LTC4261
|
|
tristate "Linear Technology LTC4261"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Linear Technology LTC4261
|
|
Negative Voltage Hot Swap Controller I2C interface.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called ltc4261.
|
|
|
|
config SENSORS_LTQ_CPUTEMP
|
|
bool "Lantiq cpu temperature sensor driver"
|
|
depends on SOC_XWAY
|
|
help
|
|
If you say yes here you get support for the temperature
|
|
sensor inside your CPU.
|
|
|
|
config SENSORS_MAX1111
|
|
tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles"
|
|
depends on SPI_MASTER
|
|
help
|
|
Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113
|
|
ADC chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max1111.
|
|
|
|
config SENSORS_MAX127
|
|
tristate "Maxim MAX127 12-bit 8-channel Data Acquisition System"
|
|
depends on I2C
|
|
help
|
|
Say y here to support Maxim's MAX127 DAS chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max127.
|
|
|
|
config SENSORS_MAX16065
|
|
tristate "Maxim MAX16065 System Manager and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for hardware monitoring
|
|
capabilities of the following Maxim System Manager chips.
|
|
MAX16065
|
|
MAX16066
|
|
MAX16067
|
|
MAX16068
|
|
MAX16070
|
|
MAX16071
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max16065.
|
|
|
|
config SENSORS_MAX1619
|
|
tristate "Maxim MAX1619 sensor chip"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for MAX1619 sensor chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max1619.
|
|
|
|
config SENSORS_MAX1668
|
|
tristate "Maxim MAX1668 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for MAX1668, MAX1989 and
|
|
MAX1805 chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max1668.
|
|
|
|
config SENSORS_MAX197
|
|
tristate "Maxim MAX197 and compatibles"
|
|
help
|
|
Support for the Maxim MAX197 A/D converter.
|
|
Support will include, but not be limited to, MAX197, and MAX199.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max197.
|
|
|
|
config SENSORS_MAX31722
|
|
tristate "MAX31722 temperature sensor"
|
|
depends on SPI
|
|
help
|
|
Support for the Maxim Integrated MAX31722/MAX31723 digital
|
|
thermometers/thermostats operating over an SPI interface.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max31722.
|
|
|
|
config SENSORS_MAX31730
|
|
tristate "MAX31730 temperature sensor"
|
|
depends on I2C
|
|
help
|
|
Support for the Maxim Integrated MAX31730 3-Channel Remote
|
|
Temperature Sensor.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max31730.
|
|
|
|
config SENSORS_MAX31760
|
|
tristate "MAX31760 fan speed controller"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
Support for the Analog Devices MAX31760 Precision Fan-Speed
|
|
Controller. MAX31760 integrates temperature sensing along with
|
|
precision PWM fan control.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max31760.
|
|
|
|
config SENSORS_MAX6620
|
|
tristate "Maxim MAX6620 fan controller"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the MAX6620
|
|
fan controller.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max6620.
|
|
|
|
config SENSORS_MAX6621
|
|
tristate "Maxim MAX6621 sensor chip"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for MAX6621 sensor chip.
|
|
MAX6621 is a PECI-to-I2C translator provides an efficient,
|
|
low-cost solution for PECI-to-SMBus/I2C protocol conversion.
|
|
It allows reading the temperature from the PECI-compliant
|
|
host directly from up to four PECI-enabled CPUs.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max6621.
|
|
|
|
config SENSORS_MAX6639
|
|
tristate "Maxim MAX6639 sensor chip"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the MAX6639
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max6639.
|
|
|
|
config SENSORS_MAX6642
|
|
tristate "Maxim MAX6642 sensor chip"
|
|
depends on I2C
|
|
depends on SENSORS_LM90=n
|
|
help
|
|
If you say yes here you get support for MAX6642 sensor chip.
|
|
MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
|
|
with Overtemperature Alarm from Maxim.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max6642.
|
|
|
|
config SENSORS_MAX6650
|
|
tristate "Maxim MAX6650 sensor chip"
|
|
depends on I2C
|
|
depends on THERMAL || THERMAL=n
|
|
help
|
|
If you say yes here you get support for the MAX6650 / MAX6651
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max6650.
|
|
|
|
config SENSORS_MAX6697
|
|
tristate "Maxim MAX6697 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for MAX6581, MAX6602, MAX6622,
|
|
MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699
|
|
temperature sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max6697.
|
|
|
|
config SENSORS_MAX31790
|
|
tristate "Maxim MAX31790 sensor chip"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for 6-Channel PWM-Output
|
|
Fan RPM Controller.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max31790.
|
|
|
|
config SENSORS_MCP3021
|
|
tristate "Microchip MCP3021 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for MCP3021 and MCP3221.
|
|
The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221
|
|
with 12-bit resolution.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called mcp3021.
|
|
|
|
config SENSORS_MLXREG_FAN
|
|
tristate "Mellanox FAN driver"
|
|
depends on MELLANOX_PLATFORM
|
|
imply THERMAL
|
|
select REGMAP
|
|
help
|
|
This option enables support for the FAN control on the Mellanox
|
|
Ethernet and InfiniBand switches. The driver can be activated by the
|
|
platform device add call. Say Y to enable these. To compile this
|
|
driver as a module, choose 'M' here: the module will be called
|
|
mlxreg-fan.
|
|
|
|
config SENSORS_TC654
|
|
tristate "Microchip TC654/TC655 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for TC654 and TC655.
|
|
The TC654 and TC655 are PWM mode fan speed controllers with
|
|
FanSense technology for use with brushless DC fans.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tc654.
|
|
|
|
config SENSORS_TPS23861
|
|
tristate "Texas Instruments TPS23861 PoE PSE"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for Texas Instruments
|
|
TPS23861 802.3at PoE PSE chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tps23861.
|
|
|
|
config SENSORS_MENF21BMC_HWMON
|
|
tristate "MEN 14F021P00 BMC Hardware Monitoring"
|
|
depends on MFD_MENF21BMC
|
|
help
|
|
Say Y here to include support for the MEN 14F021P00 BMC
|
|
hardware monitoring.
|
|
|
|
This driver can also be built as a module. If so the module
|
|
will be called menf21bmc_hwmon.
|
|
|
|
config SENSORS_MR75203
|
|
tristate "Moortec Semiconductor MR75203 PVT Controller"
|
|
select REGMAP_MMIO
|
|
help
|
|
If you say yes here you get support for Moortec MR75203
|
|
PVT controller.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called mr75203.
|
|
|
|
config SENSORS_ADCXX
|
|
tristate "National Semiconductor ADCxxxSxxx"
|
|
depends on SPI_MASTER
|
|
help
|
|
If you say yes here you get support for the National Semiconductor
|
|
ADC<bb><c>S<sss> chip family, where
|
|
* bb is the resolution in number of bits (8, 10, 12)
|
|
* c is the number of channels (1, 2, 4, 8)
|
|
* sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
|
|
kSPS and 101 for 1 MSPS)
|
|
|
|
Examples : ADC081S101, ADC124S501, ...
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adcxx.
|
|
|
|
config SENSORS_LM63
|
|
tristate "National Semiconductor LM63 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the National
|
|
Semiconductor LM63, LM64, and LM96163 remote diode digital temperature
|
|
sensors with integrated fan control. Such chips are found
|
|
on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
|
|
others.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm63.
|
|
|
|
config SENSORS_LM70
|
|
tristate "National Semiconductor LM70 and compatibles"
|
|
depends on SPI_MASTER
|
|
help
|
|
If you say yes here you get support for the National Semiconductor
|
|
LM70, LM71, LM74 and Texas Instruments TMP121/TMP123, TMP122/TMP124,
|
|
TMP125 digital temperature sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm70.
|
|
|
|
config SENSORS_LM73
|
|
tristate "National Semiconductor LM73"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM73
|
|
sensor chips.
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm73.
|
|
|
|
config SENSORS_LM75
|
|
tristate "National Semiconductor LM75 and compatibles"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for one common type of
|
|
temperature sensor chip, with models including:
|
|
|
|
- Analog Devices ADT75
|
|
- Atmel (now Microchip) AT30TS74
|
|
- Dallas Semiconductor DS75, DS1775 and DS7505
|
|
- Global Mixed-mode Technology (GMT) G751
|
|
- Maxim MAX6625 and MAX6626
|
|
- Microchip MCP980x
|
|
- National Semiconductor LM75, LM75A
|
|
- NXP's LM75A
|
|
- ST Microelectronics STDS75
|
|
- ST Microelectronics STLM75
|
|
- TelCom (now Microchip) TCN75
|
|
- Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75,
|
|
TMP175, TMP275
|
|
|
|
This driver supports driver model based binding through board
|
|
specific I2C device tables.
|
|
|
|
It also supports the "legacy" style of driver binding. To use
|
|
that with some chips which don't replicate LM75 quirks exactly,
|
|
you may need the "force" module parameter.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm75.
|
|
|
|
config SENSORS_LM77
|
|
tristate "National Semiconductor LM77"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM77
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm77.
|
|
|
|
config SENSORS_LM78
|
|
tristate "National Semiconductor LM78 and compatibles"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM78,
|
|
LM78-J and LM79.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm78.
|
|
|
|
config SENSORS_LM80
|
|
tristate "National Semiconductor LM80 and LM96080"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for National Semiconductor
|
|
LM80 and LM96080 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm80.
|
|
|
|
config SENSORS_LM83
|
|
tristate "National Semiconductor LM83 and compatibles"
|
|
depends on I2C
|
|
select REGMAP
|
|
help
|
|
If you say yes here you get support for National Semiconductor
|
|
LM82 and LM83 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm83.
|
|
|
|
config SENSORS_LM85
|
|
tristate "National Semiconductor LM85 and compatibles"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM85
|
|
sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
|
|
EMC6D101, EMC6D102, and EMC6D103.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm85.
|
|
|
|
config SENSORS_LM87
|
|
tristate "National Semiconductor LM87 and compatibles"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM87
|
|
and Analog Devices ADM1024 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm87.
|
|
|
|
config SENSORS_LM90
|
|
tristate "National Semiconductor LM90 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM84,
|
|
LM90, LM86, LM89 and LM99, Analog Devices ADM1020, ADM2021, ADM1021A,
|
|
ADM1023, ADM1032, ADT7461, ADT7461A, ADT7481, ADT7482, and ADT7483A,
|
|
Maxim MAX1617, MAX6642, MAX6646, MAX6647, MAX6648, MAX6649, MAX6654,
|
|
MAX6657, MAX6658, MAX6659, MAX6680, MAX6681, MAX6692, MAX6695,
|
|
MAX6696,
|
|
ON Semiconductor NCT1008, NCT210, NCT72, NCT214, NCT218,
|
|
Winbond/Nuvoton W83L771W/G/AWG/ASG,
|
|
Philips NE1618, SA56004, GMT G781, Texas Instruments TMP451 and TMP461
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm90.
|
|
|
|
config SENSORS_LM92
|
|
tristate "National Semiconductor LM92 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM92
|
|
and Maxim MAX6635 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm92.
|
|
|
|
config SENSORS_LM93
|
|
tristate "National Semiconductor LM93 and compatibles"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM93,
|
|
LM94, and compatible sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm93.
|
|
|
|
config SENSORS_LM95234
|
|
tristate "National Semiconductor LM95234 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the LM95233 and LM95234
|
|
temperature sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm95234.
|
|
|
|
config SENSORS_LM95241
|
|
tristate "National Semiconductor LM95241 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for LM95231 and LM95241 sensor
|
|
chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm95241.
|
|
|
|
config SENSORS_LM95245
|
|
tristate "National Semiconductor LM95245 and compatibles"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for LM95235 and LM95245
|
|
temperature sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm95245.
|
|
|
|
config SENSORS_PC87360
|
|
tristate "National Semiconductor PC87360 family"
|
|
depends on !PPC
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get access to the hardware monitoring
|
|
functions of the National Semiconductor PC8736x Super-I/O chips.
|
|
The PC87360, PC87363 and PC87364 only have fan monitoring and
|
|
control. The PC87365 and PC87366 additionally have voltage and
|
|
temperature monitoring.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called pc87360.
|
|
|
|
config SENSORS_PC87427
|
|
tristate "National Semiconductor PC87427"
|
|
depends on !PPC
|
|
help
|
|
If you say yes here you get access to the hardware monitoring
|
|
functions of the National Semiconductor PC87427 Super-I/O chip.
|
|
The chip has two distinct logical devices, one for fan speed
|
|
monitoring and control, and one for voltage and temperature
|
|
monitoring. Fan speed monitoring and control are supported, as
|
|
well as temperature monitoring. Voltages aren't supported yet.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called pc87427.
|
|
|
|
config SENSORS_NTC_THERMISTOR
|
|
tristate "NTC thermistor support"
|
|
depends on IIO
|
|
depends on THERMAL || !THERMAL_OF
|
|
help
|
|
This driver supports NTC thermistors sensor reading and its
|
|
interpretation. The driver can also monitor the temperature and
|
|
send notifications about the temperature.
|
|
|
|
Currently, this driver supports
|
|
NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333,
|
|
NCP03WF104 and NCP15XH103 from Murata and B57330V2103 and
|
|
B57891S0103 from EPCOS.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ntc-thermistor.
|
|
|
|
config SENSORS_NCT6683
|
|
tristate "Nuvoton NCT6683D"
|
|
depends on !PPC
|
|
help
|
|
If you say yes here you get support for the hardware monitoring
|
|
functionality of the Nuvoton NCT6683D eSIO chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called nct6683.
|
|
|
|
config SENSORS_NCT6775_CORE
|
|
tristate
|
|
select REGMAP
|
|
help
|
|
This module contains common code shared by the platform and
|
|
i2c versions of the nct6775 driver; it is not useful on its
|
|
own.
|
|
|
|
If built as a module, the module will be called
|
|
nct6775-core.
|
|
|
|
config SENSORS_NCT6775
|
|
tristate "Platform driver for Nuvoton NCT6775F and compatibles"
|
|
depends on !PPC
|
|
depends on ACPI_WMI || ACPI_WMI=n
|
|
select HWMON_VID
|
|
select SENSORS_NCT6775_CORE
|
|
help
|
|
If you say yes here you get support for the hardware monitoring
|
|
functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D,
|
|
NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible
|
|
Super-I/O chips. This driver replaces the w83627ehf driver for
|
|
NCT6775F and NCT6776F.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called nct6775.
|
|
|
|
config SENSORS_NCT6775_I2C
|
|
tristate "I2C driver for Nuvoton NCT6775F and compatibles"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
select SENSORS_NCT6775_CORE
|
|
help
|
|
If you say yes here you get support for the hardware monitoring
|
|
functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D,
|
|
NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible
|
|
Super-I/O chips via their I2C interface.
|
|
|
|
If you're not building a kernel for a BMC, this is probably
|
|
not the driver you want (see CONFIG_SENSORS_NCT6775).
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called nct6775-i2c.
|
|
|
|
config SENSORS_NCT7802
|
|
tristate "Nuvoton NCT7802Y"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for the Nuvoton NCT7802Y
|
|
hardware monitoring chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called nct7802.
|
|
|
|
config SENSORS_NCT7904
|
|
tristate "Nuvoton NCT7904"
|
|
depends on I2C && WATCHDOG
|
|
select WATCHDOG_CORE
|
|
help
|
|
If you say yes here you get support for the Nuvoton NCT7904
|
|
hardware monitoring chip, including manual fan speed control
|
|
and support for the integrated watchdog.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called nct7904.
|
|
|
|
config SENSORS_NPCM7XX
|
|
tristate "Nuvoton NPCM750 and compatible PWM and Fan controllers"
|
|
imply THERMAL
|
|
help
|
|
This driver provides support for Nuvoton NPCM750/730/715/705 PWM
|
|
and Fan controllers.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called npcm750-pwm-fan.
|
|
|
|
config SENSORS_NSA320
|
|
tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors"
|
|
depends on GPIOLIB && OF
|
|
depends on MACH_KIRKWOOD || COMPILE_TEST
|
|
help
|
|
If you say yes here you get support for hardware monitoring
|
|
for the ZyXEL NSA320 Media Server and other compatible devices
|
|
(probably the NSA325 and some NSA310 variants).
|
|
|
|
The sensor data is taken from a Holtek HT46R065 microcontroller
|
|
connected to GPIO lines.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called nsa320-hwmon.
|
|
|
|
config SENSORS_NZXT_KRAKEN2
|
|
tristate "NZXT Kraken X42/X51/X62/X72 liquid coolers"
|
|
depends on USB_HID
|
|
help
|
|
If you say yes here you get support for hardware monitoring for the
|
|
NZXT Kraken X42/X52/X62/X72 all-in-one CPU liquid coolers.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called nzxt-kraken2.
|
|
|
|
config SENSORS_NZXT_SMART2
|
|
tristate "NZXT RGB & Fan Controller/Smart Device v2"
|
|
depends on USB_HID
|
|
help
|
|
If you say yes here you get support for hardware monitoring for the
|
|
NZXT RGB & Fan Controller/Smart Device v2.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called nzxt-smart2.
|
|
|
|
source "drivers/hwmon/occ/Kconfig"
|
|
|
|
config SENSORS_OXP
|
|
tristate "OneXPlayer EC fan control"
|
|
depends on ACPI
|
|
depends on X86
|
|
help
|
|
If you say yes here you get support for fan readings and control over
|
|
OneXPlayer handheld devices. Only OneXPlayer mini AMD handheld variant
|
|
boards are supported.
|
|
|
|
Can also be built as a module. In that case it will be called oxp-sensors.
|
|
|
|
config SENSORS_PCF8591
|
|
tristate "Philips PCF8591 ADC/DAC"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Philips PCF8591 4-channel
|
|
ADC, 1-channel DAC chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called pcf8591.
|
|
|
|
These devices are hard to detect and rarely found on mainstream
|
|
hardware. If unsure, say N.
|
|
|
|
source "drivers/hwmon/peci/Kconfig"
|
|
|
|
source "drivers/hwmon/pmbus/Kconfig"
|
|
|
|
config SENSORS_PWM_FAN
|
|
tristate "PWM fan"
|
|
depends on (PWM && OF) || COMPILE_TEST
|
|
depends on THERMAL || THERMAL=n
|
|
help
|
|
If you say yes here you get support for fans connected to PWM lines.
|
|
The driver uses the generic PWM interface, thus it will work on a
|
|
variety of SoCs.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called pwm-fan.
|
|
|
|
config SENSORS_RASPBERRYPI_HWMON
|
|
tristate "Raspberry Pi voltage monitor"
|
|
depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE)
|
|
help
|
|
If you say yes here you get support for voltage sensor on the
|
|
Raspberry Pi.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called raspberrypi-hwmon.
|
|
|
|
config SENSORS_SL28CPLD
|
|
tristate "Kontron sl28cpld hardware monitoring driver"
|
|
depends on MFD_SL28CPLD || COMPILE_TEST
|
|
help
|
|
If you say yes here you get support for the fan supervisor of the
|
|
sl28cpld board management controller.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sl28cpld-hwmon.
|
|
|
|
config SENSORS_SBTSI
|
|
tristate "Emulated SB-TSI temperature sensor"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for emulated temperature
|
|
sensors on AMD SoCs with SB-TSI interface connected to a BMC device.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called sbtsi_temp.
|
|
|
|
config SENSORS_SBRMI
|
|
tristate "Emulated SB-RMI sensor"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for emulated RMI
|
|
sensors on AMD SoCs with APML interface connected to a BMC device.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called sbrmi.
|
|
|
|
config SENSORS_SHT15
|
|
tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
select BITREVERSE
|
|
help
|
|
If you say yes here you get support for the Sensiron SHT10, SHT11,
|
|
SHT15, SHT71, SHT75 humidity and temperature sensors.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sht15.
|
|
|
|
config SENSORS_SHT21
|
|
tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Sensiron SHT21, SHT25
|
|
humidity and temperature sensors.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sht21.
|
|
|
|
config SENSORS_SHT3x
|
|
tristate "Sensiron humidity and temperature sensors. SHT3x and compat."
|
|
depends on I2C
|
|
select CRC8
|
|
help
|
|
If you say yes here you get support for the Sensiron SHT30 and SHT31
|
|
humidity and temperature sensors.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sht3x.
|
|
|
|
config SENSORS_SHT4x
|
|
tristate "Sensiron humidity and temperature sensors. SHT4x and compat."
|
|
depends on I2C
|
|
select CRC8
|
|
help
|
|
If you say yes here you get support for the Sensiron SHT40, SHT41 and
|
|
SHT45 humidity and temperature sensors.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sht4x.
|
|
|
|
config SENSORS_SHTC1
|
|
tristate "Sensiron humidity and temperature sensors. SHTC1 and compat."
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Sensiron SHTC1, SHTW1,
|
|
and SHTC3 humidity and temperature sensors.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called shtc1.
|
|
|
|
config SENSORS_S3C
|
|
tristate "Samsung built-in ADC"
|
|
depends on S3C_ADC
|
|
help
|
|
If you say yes here you get support for the on-board ADCs of
|
|
the Samsung S3C24XX, S3C64XX and other series of SoC
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called s3c-hwmon.
|
|
|
|
config SENSORS_S3C_RAW
|
|
bool "Include raw channel attributes in sysfs"
|
|
depends on SENSORS_S3C
|
|
help
|
|
Say Y here if you want to include raw copies of all the ADC
|
|
channels in sysfs.
|
|
|
|
config SENSORS_SIS5595
|
|
tristate "Silicon Integrated Systems Corp. SiS5595"
|
|
depends on PCI
|
|
help
|
|
If you say yes here you get support for the integrated sensors in
|
|
SiS5595 South Bridges.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sis5595.
|
|
|
|
config SENSORS_SY7636A
|
|
tristate "Silergy SY7636A"
|
|
depends on MFD_SY7636A
|
|
help
|
|
If you say yes here you get support for the thermistor readout of
|
|
the Silergy SY7636A PMIC.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sy7636a-hwmon.
|
|
|
|
config SENSORS_DME1737
|
|
tristate "SMSC DME1737, SCH311x and compatibles"
|
|
depends on I2C && !PPC
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the hardware monitoring
|
|
and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
|
|
Asus A8000 Super-I/O chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called dme1737.
|
|
|
|
config SENSORS_EMC1403
|
|
tristate "SMSC EMC1403/23 thermal sensor"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for the SMSC EMC1403/23
|
|
temperature monitoring chip.
|
|
|
|
Threshold values can be configured using sysfs.
|
|
Data from the different diodes are accessible via sysfs.
|
|
|
|
config SENSORS_EMC2103
|
|
tristate "SMSC EMC2103"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the temperature
|
|
and fan sensors of the SMSC EMC2103 chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called emc2103.
|
|
|
|
config SENSORS_EMC2305
|
|
tristate "Microchip EMC2305 and compatible EMC2301/2/3"
|
|
depends on I2C
|
|
imply THERMAL
|
|
help
|
|
If you say yes here you get support for the Microchip EMC2305
|
|
fan controller chips.
|
|
The Microchip EMC2305 is a fan controller for up to 5 fans.
|
|
Fan rotation speeds are reported in RPM.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called emc2305.
|
|
|
|
config SENSORS_EMC6W201
|
|
tristate "SMSC EMC6W201"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the SMSC EMC6W201
|
|
hardware monitoring chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called emc6w201.
|
|
|
|
config SENSORS_SMSC47M1
|
|
tristate "SMSC LPC47M10x and compatibles"
|
|
depends on !PPC
|
|
help
|
|
If you say yes here you get support for the integrated fan
|
|
monitoring and control capabilities of the SMSC LPC47B27x,
|
|
LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
|
|
LPC47M192, LPC47M292 and LPC47M997 chips.
|
|
|
|
The temperature and voltage sensor features of the LPC47M15x,
|
|
LPC47M192, LPC47M292 and LPC47M997 are supported by another
|
|
driver, select also "SMSC LPC47M192 and compatibles" below for
|
|
those.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called smsc47m1.
|
|
|
|
config SENSORS_SMSC47M192
|
|
tristate "SMSC LPC47M192 and compatibles"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the temperature and
|
|
voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
|
|
and LPC47M997 chips.
|
|
|
|
The fan monitoring and control capabilities of these chips
|
|
are supported by another driver, select
|
|
"SMSC LPC47M10x and compatibles" above. You need both drivers
|
|
if you want fan control and voltage/temperature sensor support.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called smsc47m192.
|
|
|
|
config SENSORS_SMSC47B397
|
|
tristate "SMSC LPC47B397-NC"
|
|
depends on !PPC
|
|
help
|
|
If you say yes here you get support for the SMSC LPC47B397-NC
|
|
sensor chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called smsc47b397.
|
|
|
|
config SENSORS_SCH56XX_COMMON
|
|
tristate
|
|
|
|
config SENSORS_SCH5627
|
|
tristate "SMSC SCH5627"
|
|
depends on !PPC && WATCHDOG
|
|
select SENSORS_SCH56XX_COMMON
|
|
select WATCHDOG_CORE
|
|
help
|
|
If you say yes here you get support for the hardware monitoring
|
|
features of the SMSC SCH5627 Super-I/O chip including support for
|
|
the integrated watchdog.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sch5627.
|
|
|
|
config SENSORS_SCH5636
|
|
tristate "SMSC SCH5636"
|
|
depends on !PPC && WATCHDOG
|
|
select SENSORS_SCH56XX_COMMON
|
|
select WATCHDOG_CORE
|
|
help
|
|
SMSC SCH5636 Super I/O chips include an embedded microcontroller for
|
|
hardware monitoring solutions, allowing motherboard manufacturers to
|
|
create their own custom hwmon solution based upon the SCH5636.
|
|
|
|
Currently this driver only supports the Fujitsu Theseus SCH5636 based
|
|
hwmon solution. Say yes here if you want support for the Fujitsu
|
|
Theseus' hardware monitoring features including support for the
|
|
integrated watchdog.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sch5636.
|
|
|
|
config SENSORS_STTS751
|
|
tristate "ST Microelectronics STTS751"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for STTS751
|
|
temperature sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called stts751.
|
|
|
|
config SENSORS_SMM665
|
|
tristate "Summit Microelectronics SMM665"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the hardware monitoring
|
|
features of the Summit Microelectronics SMM665/SMM665B Six-Channel
|
|
Active DC Output Controller / Monitor.
|
|
|
|
Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
|
|
Support for those chips is untested.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called smm665.
|
|
|
|
config SENSORS_ADC128D818
|
|
tristate "Texas Instruments ADC128D818"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Texas Instruments
|
|
ADC128D818 System Monitor with Temperature Sensor chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adc128d818.
|
|
|
|
config SENSORS_ADS7828
|
|
tristate "Texas Instruments ADS7828 and compatibles"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for Texas Instruments ADS7828 and
|
|
ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while
|
|
it is 8-bit on ADS7830.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ads7828.
|
|
|
|
config SENSORS_ADS7871
|
|
tristate "Texas Instruments ADS7871 A/D converter"
|
|
depends on SPI
|
|
help
|
|
If you say yes here you get support for TI ADS7871 & ADS7870
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ads7871.
|
|
|
|
config SENSORS_AMC6821
|
|
tristate "Texas Instruments AMC6821"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Texas Instruments
|
|
AMC6821 hardware monitoring chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called amc6821.
|
|
|
|
config SENSORS_INA209
|
|
tristate "TI / Burr Brown INA209"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the TI / Burr Brown INA209
|
|
voltage / current / power monitor I2C interface.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called ina209.
|
|
|
|
config SENSORS_INA2XX
|
|
tristate "Texas Instruments INA219 and compatibles"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for INA219, INA220, INA226,
|
|
INA230, and INA231 power monitor chips.
|
|
|
|
The INA2xx driver is configured for the default configuration of
|
|
the part as described in the datasheet.
|
|
Default value for Rshunt is 10 mOhms.
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ina2xx.
|
|
|
|
config SENSORS_INA238
|
|
tristate "Texas Instruments INA238"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for the INA238 power monitor
|
|
chip. This driver supports voltage, current, power and temperature
|
|
measurements as well as alarm configuration.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ina238.
|
|
|
|
config SENSORS_INA3221
|
|
tristate "Texas Instruments INA3221 Triple Power Monitor"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for the TI INA3221 Triple Power
|
|
Monitor.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ina3221.
|
|
|
|
config SENSORS_TC74
|
|
tristate "Microchip TC74"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Microchip TC74 single
|
|
input temperature sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tc74.
|
|
|
|
config SENSORS_THMC50
|
|
tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Texas Instruments THMC50
|
|
sensor chips and clones: the Analog Devices ADM1022.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called thmc50.
|
|
|
|
config SENSORS_TMP102
|
|
tristate "Texas Instruments TMP102"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for Texas Instruments TMP102
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tmp102.
|
|
|
|
config SENSORS_TMP103
|
|
tristate "Texas Instruments TMP103"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for Texas Instruments TMP103
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tmp103.
|
|
|
|
config SENSORS_TMP108
|
|
tristate "Texas Instruments TMP108"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for Texas Instruments TMP108
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tmp108.
|
|
|
|
config SENSORS_TMP401
|
|
tristate "Texas Instruments TMP401 and compatibles"
|
|
depends on I2C
|
|
select REGMAP
|
|
help
|
|
If you say yes here you get support for Texas Instruments TMP401,
|
|
TMP411, TMP431, TMP432, and TMP435 temperature sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tmp401.
|
|
|
|
config SENSORS_TMP421
|
|
tristate "Texas Instruments TMP421 and compatible"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Texas Instruments TMP421,
|
|
TMP422, TMP423, TMP441, and TMP442 temperature sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tmp421.
|
|
|
|
config SENSORS_TMP464
|
|
tristate "Texas Instruments TMP464 and compatible"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for Texas Instruments TMP464
|
|
and TMP468 temperature sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tmp464.
|
|
|
|
config SENSORS_TMP513
|
|
tristate "Texas Instruments TMP513 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Texas Instruments TMP512,
|
|
and TMP513 temperature and power supply sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tmp513.
|
|
|
|
config SENSORS_VEXPRESS
|
|
tristate "Versatile Express"
|
|
depends on VEXPRESS_CONFIG
|
|
help
|
|
This driver provides support for hardware sensors available on
|
|
the ARM Ltd's Versatile Express platform. It can provide wide
|
|
range of information like temperature, power, energy.
|
|
|
|
config SENSORS_VIA_CPUTEMP
|
|
tristate "VIA CPU temperature sensor"
|
|
depends on X86
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the temperature
|
|
sensor inside your CPU. Supported are all known variants of
|
|
the VIA C7 and Nano.
|
|
|
|
config SENSORS_VIA686A
|
|
tristate "VIA686A"
|
|
depends on PCI
|
|
help
|
|
If you say yes here you get support for the integrated sensors in
|
|
Via 686A/B South Bridges.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called via686a.
|
|
|
|
config SENSORS_VT1211
|
|
tristate "VIA VT1211"
|
|
depends on !PPC
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here then you get support for hardware monitoring
|
|
features of the VIA VT1211 Super-I/O chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called vt1211.
|
|
|
|
config SENSORS_VT8231
|
|
tristate "VIA VT8231"
|
|
depends on PCI
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here then you get support for the integrated sensors
|
|
in the VIA VT8231 device.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called vt8231.
|
|
|
|
config SENSORS_W83773G
|
|
tristate "Nuvoton W83773G"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for the Nuvoton W83773G hardware
|
|
monitoring chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83773g.
|
|
|
|
config SENSORS_W83781D
|
|
tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the Winbond W8378x series
|
|
of sensor chips: the W83781D, W83782D and W83783S, and the similar
|
|
Asus AS99127F.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83781d.
|
|
|
|
config SENSORS_W83791D
|
|
tristate "Winbond W83791D"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the Winbond W83791D chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83791d.
|
|
|
|
config SENSORS_W83792D
|
|
tristate "Winbond W83792D"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Winbond W83792D chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83792d.
|
|
|
|
config SENSORS_W83793
|
|
tristate "Winbond W83793"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the Winbond W83793
|
|
hardware monitoring chip, including support for the integrated
|
|
watchdog.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83793.
|
|
|
|
config SENSORS_W83795
|
|
tristate "Winbond/Nuvoton W83795G/ADG"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Winbond W83795G and
|
|
W83795ADG hardware monitoring chip, including manual fan speed
|
|
control.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83795.
|
|
|
|
config SENSORS_W83795_FANCTRL
|
|
bool "Include automatic fan control support"
|
|
depends on SENSORS_W83795
|
|
help
|
|
If you say yes here, support for automatic fan speed control
|
|
will be included in the driver.
|
|
|
|
Please also note that this option will create sysfs attribute
|
|
files which may change in the future, so you shouldn't rely
|
|
on them being stable.
|
|
|
|
config SENSORS_W83L785TS
|
|
tristate "Winbond W83L785TS-S"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Winbond W83L785TS-S
|
|
sensor chip, which is used on the Asus A7N8X, among other
|
|
motherboards.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83l785ts.
|
|
|
|
config SENSORS_W83L786NG
|
|
tristate "Winbond W83L786NG, W83L786NR"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Winbond W83L786NG
|
|
and W83L786NR sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83l786ng.
|
|
|
|
config SENSORS_W83627HF
|
|
tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
|
|
depends on !PPC
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the Winbond W836X7 series
|
|
of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
|
|
W83697HF.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83627hf.
|
|
|
|
config SENSORS_W83627EHF
|
|
tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG"
|
|
depends on !PPC
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the hardware
|
|
monitoring functionality of the Winbond W83627EHF Super-I/O chip.
|
|
|
|
This driver also supports the W83627EHG, which is the lead-free
|
|
version of the W83627EHF, and the W83627DHG, which is a similar
|
|
chip suited for specific Intel processors that use PECI such as
|
|
the Core 2 Duo. And also the W83627UHG, which is a stripped down
|
|
version of the W83627DHG (as far as hardware monitoring goes.)
|
|
|
|
This driver also supports Nuvoton W83667HG and W83667HG-B.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83627ehf.
|
|
|
|
config SENSORS_WM831X
|
|
tristate "WM831x PMICs"
|
|
depends on MFD_WM831X
|
|
help
|
|
If you say yes here you get support for the hardware
|
|
monitoring functionality of the Wolfson Microelectronics
|
|
WM831x series of PMICs.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called wm831x-hwmon.
|
|
|
|
config SENSORS_WM8350
|
|
tristate "Wolfson Microelectronics WM835x"
|
|
depends on MFD_WM8350
|
|
help
|
|
If you say yes here you get support for the hardware
|
|
monitoring features of the WM835x series of PMICs.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called wm8350-hwmon.
|
|
|
|
config SENSORS_ULTRA45
|
|
tristate "Sun Ultra45 PIC16F747"
|
|
depends on SPARC64
|
|
help
|
|
This driver provides support for the Ultra45 workstation environmental
|
|
sensors.
|
|
|
|
config SENSORS_XGENE
|
|
tristate "APM X-Gene SoC hardware monitoring driver"
|
|
depends on XGENE_SLIMPRO_MBOX || PCC
|
|
help
|
|
If you say yes here you get support for the temperature
|
|
and power sensors for APM X-Gene SoC.
|
|
|
|
config SENSORS_INTEL_M10_BMC_HWMON
|
|
tristate "Intel MAX10 BMC Hardware Monitoring"
|
|
depends on MFD_INTEL_M10_BMC
|
|
help
|
|
This driver provides support for the hardware monitoring functionality
|
|
on Intel MAX10 BMC chip.
|
|
|
|
This BMC Chip is used on Intel FPGA PCIe Acceleration Cards (PAC). Its
|
|
sensors monitor various telemetry data of different components on the
|
|
card, e.g. board temperature, FPGA core temperature/voltage/current.
|
|
|
|
if ACPI
|
|
|
|
comment "ACPI drivers"
|
|
|
|
config SENSORS_ACPI_POWER
|
|
tristate "ACPI 4.0 power meter"
|
|
help
|
|
This driver exposes ACPI 4.0 power meters as hardware monitoring
|
|
devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware
|
|
and a power meter.
|
|
|
|
To compile this driver as a module, choose M here:
|
|
the module will be called acpi_power_meter.
|
|
|
|
config SENSORS_ATK0110
|
|
tristate "ASUS ATK0110"
|
|
depends on X86
|
|
help
|
|
If you say yes here you get support for the ACPI hardware
|
|
monitoring interface found in many ASUS motherboards. This
|
|
driver will provide readings of fans, voltages and temperatures
|
|
through the system firmware.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called asus_atk0110.
|
|
|
|
config SENSORS_ASUS_WMI
|
|
tristate "ASUS WMI X370/X470/B450/X399"
|
|
depends on ACPI_WMI
|
|
help
|
|
If you say yes here you get support for the ACPI hardware monitoring
|
|
interface found in X370/X470/B450/X399 ASUS motherboards. This driver
|
|
will provide readings of fans, voltages and temperatures through the system
|
|
firmware.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called asus_wmi_sensors.
|
|
|
|
config SENSORS_ASUS_EC
|
|
tristate "ASUS EC Sensors"
|
|
depends on X86
|
|
help
|
|
If you say yes here you get support for the ACPI embedded controller
|
|
hardware monitoring interface found in ASUS motherboards. The driver
|
|
currently supports B550/X570 boards, although other ASUS boards might
|
|
provide this monitoring interface as well.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called asus_ec_sensors.
|
|
|
|
endif # ACPI
|
|
|
|
endif # HWMON
|