986 lines
24 KiB
C
986 lines
24 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* arch/arm/mach-at91/pm.c
|
|
* AT91 Power Management
|
|
*
|
|
* Copyright (C) 2005 David Brownell
|
|
*/
|
|
|
|
#include <linux/genalloc.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/parser.h>
|
|
#include <linux/suspend.h>
|
|
|
|
#include <linux/clk/at91_pmc.h>
|
|
#include <linux/platform_data/atmel.h>
|
|
|
|
#include <asm/cacheflush.h>
|
|
#include <asm/fncpy.h>
|
|
#include <asm/system_misc.h>
|
|
#include <asm/suspend.h>
|
|
|
|
#include "generic.h"
|
|
#include "pm.h"
|
|
|
|
/*
|
|
* FIXME: this is needed to communicate between the pinctrl driver and
|
|
* the PM implementation in the machine. Possibly part of the PM
|
|
* implementation should be moved down into the pinctrl driver and get
|
|
* called as part of the generic suspend/resume path.
|
|
*/
|
|
#ifdef CONFIG_PINCTRL_AT91
|
|
extern void at91_pinctrl_gpio_suspend(void);
|
|
extern void at91_pinctrl_gpio_resume(void);
|
|
#endif
|
|
|
|
struct at91_soc_pm {
|
|
int (*config_shdwc_ws)(void __iomem *shdwc, u32 *mode, u32 *polarity);
|
|
int (*config_pmc_ws)(void __iomem *pmc, u32 mode, u32 polarity);
|
|
const struct of_device_id *ws_ids;
|
|
struct at91_pm_data data;
|
|
};
|
|
|
|
static struct at91_soc_pm soc_pm = {
|
|
.data = {
|
|
.standby_mode = AT91_PM_STANDBY,
|
|
.suspend_mode = AT91_PM_ULP0,
|
|
},
|
|
};
|
|
|
|
static const match_table_t pm_modes __initconst = {
|
|
{ AT91_PM_STANDBY, "standby" },
|
|
{ AT91_PM_ULP0, "ulp0" },
|
|
{ AT91_PM_ULP0_FAST, "ulp0-fast" },
|
|
{ AT91_PM_ULP1, "ulp1" },
|
|
{ AT91_PM_BACKUP, "backup" },
|
|
{ -1, NULL },
|
|
};
|
|
|
|
#define at91_ramc_read(id, field) \
|
|
__raw_readl(soc_pm.data.ramc[id] + field)
|
|
|
|
#define at91_ramc_write(id, field, value) \
|
|
__raw_writel(value, soc_pm.data.ramc[id] + field)
|
|
|
|
static int at91_pm_valid_state(suspend_state_t state)
|
|
{
|
|
switch (state) {
|
|
case PM_SUSPEND_ON:
|
|
case PM_SUSPEND_STANDBY:
|
|
case PM_SUSPEND_MEM:
|
|
return 1;
|
|
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static int canary = 0xA5A5A5A5;
|
|
|
|
static struct at91_pm_bu {
|
|
int suspended;
|
|
unsigned long reserved;
|
|
phys_addr_t canary;
|
|
phys_addr_t resume;
|
|
} *pm_bu;
|
|
|
|
struct wakeup_source_info {
|
|
unsigned int pmc_fsmr_bit;
|
|
unsigned int shdwc_mr_bit;
|
|
bool set_polarity;
|
|
};
|
|
|
|
static const struct wakeup_source_info ws_info[] = {
|
|
{ .pmc_fsmr_bit = AT91_PMC_FSTT(10), .set_polarity = true },
|
|
{ .pmc_fsmr_bit = AT91_PMC_RTCAL, .shdwc_mr_bit = BIT(17) },
|
|
{ .pmc_fsmr_bit = AT91_PMC_USBAL },
|
|
{ .pmc_fsmr_bit = AT91_PMC_SDMMC_CD },
|
|
{ .pmc_fsmr_bit = AT91_PMC_RTTAL },
|
|
{ .pmc_fsmr_bit = AT91_PMC_RXLP_MCE },
|
|
};
|
|
|
|
static const struct of_device_id sama5d2_ws_ids[] = {
|
|
{ .compatible = "atmel,sama5d2-gem", .data = &ws_info[0] },
|
|
{ .compatible = "atmel,at91rm9200-rtc", .data = &ws_info[1] },
|
|
{ .compatible = "atmel,sama5d3-udc", .data = &ws_info[2] },
|
|
{ .compatible = "atmel,at91rm9200-ohci", .data = &ws_info[2] },
|
|
{ .compatible = "usb-ohci", .data = &ws_info[2] },
|
|
{ .compatible = "atmel,at91sam9g45-ehci", .data = &ws_info[2] },
|
|
{ .compatible = "usb-ehci", .data = &ws_info[2] },
|
|
{ .compatible = "atmel,sama5d2-sdhci", .data = &ws_info[3] },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
static const struct of_device_id sam9x60_ws_ids[] = {
|
|
{ .compatible = "atmel,at91sam9x5-rtc", .data = &ws_info[1] },
|
|
{ .compatible = "atmel,at91rm9200-ohci", .data = &ws_info[2] },
|
|
{ .compatible = "usb-ohci", .data = &ws_info[2] },
|
|
{ .compatible = "atmel,at91sam9g45-ehci", .data = &ws_info[2] },
|
|
{ .compatible = "usb-ehci", .data = &ws_info[2] },
|
|
{ .compatible = "atmel,at91sam9260-rtt", .data = &ws_info[4] },
|
|
{ .compatible = "cdns,sam9x60-macb", .data = &ws_info[5] },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
static int at91_pm_config_ws(unsigned int pm_mode, bool set)
|
|
{
|
|
const struct wakeup_source_info *wsi;
|
|
const struct of_device_id *match;
|
|
struct platform_device *pdev;
|
|
struct device_node *np;
|
|
unsigned int mode = 0, polarity = 0, val = 0;
|
|
|
|
if (pm_mode != AT91_PM_ULP1)
|
|
return 0;
|
|
|
|
if (!soc_pm.data.pmc || !soc_pm.data.shdwc || !soc_pm.ws_ids)
|
|
return -EPERM;
|
|
|
|
if (!set) {
|
|
writel(mode, soc_pm.data.pmc + AT91_PMC_FSMR);
|
|
return 0;
|
|
}
|
|
|
|
if (soc_pm.config_shdwc_ws)
|
|
soc_pm.config_shdwc_ws(soc_pm.data.shdwc, &mode, &polarity);
|
|
|
|
/* SHDWC.MR */
|
|
val = readl(soc_pm.data.shdwc + 0x04);
|
|
|
|
/* Loop through defined wakeup sources. */
|
|
for_each_matching_node_and_match(np, soc_pm.ws_ids, &match) {
|
|
pdev = of_find_device_by_node(np);
|
|
if (!pdev)
|
|
continue;
|
|
|
|
if (device_may_wakeup(&pdev->dev)) {
|
|
wsi = match->data;
|
|
|
|
/* Check if enabled on SHDWC. */
|
|
if (wsi->shdwc_mr_bit && !(val & wsi->shdwc_mr_bit))
|
|
goto put_device;
|
|
|
|
mode |= wsi->pmc_fsmr_bit;
|
|
if (wsi->set_polarity)
|
|
polarity |= wsi->pmc_fsmr_bit;
|
|
}
|
|
|
|
put_device:
|
|
put_device(&pdev->dev);
|
|
}
|
|
|
|
if (mode) {
|
|
if (soc_pm.config_pmc_ws)
|
|
soc_pm.config_pmc_ws(soc_pm.data.pmc, mode, polarity);
|
|
} else {
|
|
pr_err("AT91: PM: no ULP1 wakeup sources found!");
|
|
}
|
|
|
|
return mode ? 0 : -EPERM;
|
|
}
|
|
|
|
static int at91_sama5d2_config_shdwc_ws(void __iomem *shdwc, u32 *mode,
|
|
u32 *polarity)
|
|
{
|
|
u32 val;
|
|
|
|
/* SHDWC.WUIR */
|
|
val = readl(shdwc + 0x0c);
|
|
*mode |= (val & 0x3ff);
|
|
*polarity |= ((val >> 16) & 0x3ff);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at91_sama5d2_config_pmc_ws(void __iomem *pmc, u32 mode, u32 polarity)
|
|
{
|
|
writel(mode, pmc + AT91_PMC_FSMR);
|
|
writel(polarity, pmc + AT91_PMC_FSPR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at91_sam9x60_config_pmc_ws(void __iomem *pmc, u32 mode, u32 polarity)
|
|
{
|
|
writel(mode, pmc + AT91_PMC_FSMR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Called after processes are frozen, but before we shutdown devices.
|
|
*/
|
|
static int at91_pm_begin(suspend_state_t state)
|
|
{
|
|
switch (state) {
|
|
case PM_SUSPEND_MEM:
|
|
soc_pm.data.mode = soc_pm.data.suspend_mode;
|
|
break;
|
|
|
|
case PM_SUSPEND_STANDBY:
|
|
soc_pm.data.mode = soc_pm.data.standby_mode;
|
|
break;
|
|
|
|
default:
|
|
soc_pm.data.mode = -1;
|
|
}
|
|
|
|
return at91_pm_config_ws(soc_pm.data.mode, true);
|
|
}
|
|
|
|
/*
|
|
* Verify that all the clocks are correct before entering
|
|
* slow-clock mode.
|
|
*/
|
|
static int at91_pm_verify_clocks(void)
|
|
{
|
|
unsigned long scsr;
|
|
int i;
|
|
|
|
scsr = readl(soc_pm.data.pmc + AT91_PMC_SCSR);
|
|
|
|
/* USB must not be using PLLB */
|
|
if ((scsr & soc_pm.data.uhp_udp_mask) != 0) {
|
|
pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
|
|
return 0;
|
|
}
|
|
|
|
/* PCK0..PCK3 must be disabled, or configured to use clk32k */
|
|
for (i = 0; i < 4; i++) {
|
|
u32 css;
|
|
|
|
if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
|
|
continue;
|
|
css = readl(soc_pm.data.pmc + AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
|
|
if (css != AT91_PMC_CSS_SLOW) {
|
|
pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Call this from platform driver suspend() to see how deeply to suspend.
|
|
* For example, some controllers (like OHCI) need one of the PLL clocks
|
|
* in order to act as a wakeup source, and those are not available when
|
|
* going into slow clock mode.
|
|
*
|
|
* REVISIT: generalize as clk_will_be_available(clk)? Other platforms have
|
|
* the very same problem (but not using at91 main_clk), and it'd be better
|
|
* to add one generic API rather than lots of platform-specific ones.
|
|
*/
|
|
int at91_suspend_entering_slow_clock(void)
|
|
{
|
|
return (soc_pm.data.mode >= AT91_PM_ULP0);
|
|
}
|
|
EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
|
|
|
|
static void (*at91_suspend_sram_fn)(struct at91_pm_data *);
|
|
extern void at91_pm_suspend_in_sram(struct at91_pm_data *pm_data);
|
|
extern u32 at91_pm_suspend_in_sram_sz;
|
|
|
|
static int at91_suspend_finish(unsigned long val)
|
|
{
|
|
flush_cache_all();
|
|
outer_disable();
|
|
|
|
at91_suspend_sram_fn(&soc_pm.data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void at91_pm_suspend(suspend_state_t state)
|
|
{
|
|
if (soc_pm.data.mode == AT91_PM_BACKUP) {
|
|
pm_bu->suspended = 1;
|
|
|
|
cpu_suspend(0, at91_suspend_finish);
|
|
|
|
/* The SRAM is lost between suspend cycles */
|
|
at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn,
|
|
&at91_pm_suspend_in_sram,
|
|
at91_pm_suspend_in_sram_sz);
|
|
} else {
|
|
at91_suspend_finish(0);
|
|
}
|
|
|
|
outer_resume();
|
|
}
|
|
|
|
/*
|
|
* STANDBY mode has *all* drivers suspended; ignores irqs not marked as 'wakeup'
|
|
* event sources; and reduces DRAM power. But otherwise it's identical to
|
|
* PM_SUSPEND_ON: cpu idle, and nothing fancy done with main or cpu clocks.
|
|
*
|
|
* AT91_PM_ULP0 is like STANDBY plus slow clock mode, so drivers must
|
|
* suspend more deeply, the master clock switches to the clk32k and turns off
|
|
* the main oscillator
|
|
*
|
|
* AT91_PM_BACKUP turns off the whole SoC after placing the DDR in self refresh
|
|
*/
|
|
static int at91_pm_enter(suspend_state_t state)
|
|
{
|
|
#ifdef CONFIG_PINCTRL_AT91
|
|
at91_pinctrl_gpio_suspend();
|
|
#endif
|
|
|
|
switch (state) {
|
|
case PM_SUSPEND_MEM:
|
|
case PM_SUSPEND_STANDBY:
|
|
/*
|
|
* Ensure that clocks are in a valid state.
|
|
*/
|
|
if (soc_pm.data.mode >= AT91_PM_ULP0 &&
|
|
!at91_pm_verify_clocks())
|
|
goto error;
|
|
|
|
at91_pm_suspend(state);
|
|
|
|
break;
|
|
|
|
case PM_SUSPEND_ON:
|
|
cpu_do_idle();
|
|
break;
|
|
|
|
default:
|
|
pr_debug("AT91: PM - bogus suspend state %d\n", state);
|
|
goto error;
|
|
}
|
|
|
|
error:
|
|
#ifdef CONFIG_PINCTRL_AT91
|
|
at91_pinctrl_gpio_resume();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Called right prior to thawing processes.
|
|
*/
|
|
static void at91_pm_end(void)
|
|
{
|
|
at91_pm_config_ws(soc_pm.data.mode, false);
|
|
}
|
|
|
|
|
|
static const struct platform_suspend_ops at91_pm_ops = {
|
|
.valid = at91_pm_valid_state,
|
|
.begin = at91_pm_begin,
|
|
.enter = at91_pm_enter,
|
|
.end = at91_pm_end,
|
|
};
|
|
|
|
static struct platform_device at91_cpuidle_device = {
|
|
.name = "cpuidle-at91",
|
|
};
|
|
|
|
/*
|
|
* The AT91RM9200 goes into self-refresh mode with this command, and will
|
|
* terminate self-refresh automatically on the next SDRAM access.
|
|
*
|
|
* Self-refresh mode is exited as soon as a memory access is made, but we don't
|
|
* know for sure when that happens. However, we need to restore the low-power
|
|
* mode if it was enabled before going idle. Restoring low-power mode while
|
|
* still in self-refresh is "not recommended", but seems to work.
|
|
*/
|
|
static void at91rm9200_standby(void)
|
|
{
|
|
asm volatile(
|
|
"b 1f\n\t"
|
|
".align 5\n\t"
|
|
"1: mcr p15, 0, %0, c7, c10, 4\n\t"
|
|
" str %2, [%1, %3]\n\t"
|
|
" mcr p15, 0, %0, c7, c0, 4\n\t"
|
|
:
|
|
: "r" (0), "r" (soc_pm.data.ramc[0]),
|
|
"r" (1), "r" (AT91_MC_SDRAMC_SRR));
|
|
}
|
|
|
|
/* We manage both DDRAM/SDRAM controllers, we need more than one value to
|
|
* remember.
|
|
*/
|
|
static void at91_ddr_standby(void)
|
|
{
|
|
/* Those two values allow us to delay self-refresh activation
|
|
* to the maximum. */
|
|
u32 lpr0, lpr1 = 0;
|
|
u32 mdr, saved_mdr0, saved_mdr1 = 0;
|
|
u32 saved_lpr0, saved_lpr1 = 0;
|
|
|
|
/* LPDDR1 --> force DDR2 mode during self-refresh */
|
|
saved_mdr0 = at91_ramc_read(0, AT91_DDRSDRC_MDR);
|
|
if ((saved_mdr0 & AT91_DDRSDRC_MD) == AT91_DDRSDRC_MD_LOW_POWER_DDR) {
|
|
mdr = saved_mdr0 & ~AT91_DDRSDRC_MD;
|
|
mdr |= AT91_DDRSDRC_MD_DDR2;
|
|
at91_ramc_write(0, AT91_DDRSDRC_MDR, mdr);
|
|
}
|
|
|
|
if (soc_pm.data.ramc[1]) {
|
|
saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
|
|
lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
|
|
lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
|
|
saved_mdr1 = at91_ramc_read(1, AT91_DDRSDRC_MDR);
|
|
if ((saved_mdr1 & AT91_DDRSDRC_MD) == AT91_DDRSDRC_MD_LOW_POWER_DDR) {
|
|
mdr = saved_mdr1 & ~AT91_DDRSDRC_MD;
|
|
mdr |= AT91_DDRSDRC_MD_DDR2;
|
|
at91_ramc_write(1, AT91_DDRSDRC_MDR, mdr);
|
|
}
|
|
}
|
|
|
|
saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
|
|
lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
|
|
lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
|
|
|
|
/* self-refresh mode now */
|
|
at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
|
|
if (soc_pm.data.ramc[1])
|
|
at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
|
|
|
|
cpu_do_idle();
|
|
|
|
at91_ramc_write(0, AT91_DDRSDRC_MDR, saved_mdr0);
|
|
at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
|
|
if (soc_pm.data.ramc[1]) {
|
|
at91_ramc_write(0, AT91_DDRSDRC_MDR, saved_mdr1);
|
|
at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
|
|
}
|
|
}
|
|
|
|
static void sama5d3_ddr_standby(void)
|
|
{
|
|
u32 lpr0;
|
|
u32 saved_lpr0;
|
|
|
|
saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
|
|
lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
|
|
lpr0 |= AT91_DDRSDRC_LPCB_POWER_DOWN;
|
|
|
|
at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
|
|
|
|
cpu_do_idle();
|
|
|
|
at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
|
|
}
|
|
|
|
/* We manage both DDRAM/SDRAM controllers, we need more than one value to
|
|
* remember.
|
|
*/
|
|
static void at91sam9_sdram_standby(void)
|
|
{
|
|
u32 lpr0, lpr1 = 0;
|
|
u32 saved_lpr0, saved_lpr1 = 0;
|
|
|
|
if (soc_pm.data.ramc[1]) {
|
|
saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
|
|
lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
|
|
lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
|
|
}
|
|
|
|
saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR);
|
|
lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB;
|
|
lpr0 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
|
|
|
|
/* self-refresh mode now */
|
|
at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
|
|
if (soc_pm.data.ramc[1])
|
|
at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
|
|
|
|
cpu_do_idle();
|
|
|
|
at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
|
|
if (soc_pm.data.ramc[1])
|
|
at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
|
|
}
|
|
|
|
struct ramc_info {
|
|
void (*idle)(void);
|
|
unsigned int memctrl;
|
|
};
|
|
|
|
static const struct ramc_info ramc_infos[] __initconst = {
|
|
{ .idle = at91rm9200_standby, .memctrl = AT91_MEMCTRL_MC},
|
|
{ .idle = at91sam9_sdram_standby, .memctrl = AT91_MEMCTRL_SDRAMC},
|
|
{ .idle = at91_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR},
|
|
{ .idle = sama5d3_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR},
|
|
};
|
|
|
|
static const struct of_device_id ramc_ids[] __initconst = {
|
|
{ .compatible = "atmel,at91rm9200-sdramc", .data = &ramc_infos[0] },
|
|
{ .compatible = "atmel,at91sam9260-sdramc", .data = &ramc_infos[1] },
|
|
{ .compatible = "atmel,at91sam9g45-ddramc", .data = &ramc_infos[2] },
|
|
{ .compatible = "atmel,sama5d3-ddramc", .data = &ramc_infos[3] },
|
|
{ /*sentinel*/ }
|
|
};
|
|
|
|
static __init void at91_dt_ramc(void)
|
|
{
|
|
struct device_node *np;
|
|
const struct of_device_id *of_id;
|
|
int idx = 0;
|
|
void *standby = NULL;
|
|
const struct ramc_info *ramc;
|
|
|
|
for_each_matching_node_and_match(np, ramc_ids, &of_id) {
|
|
soc_pm.data.ramc[idx] = of_iomap(np, 0);
|
|
if (!soc_pm.data.ramc[idx])
|
|
panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx);
|
|
|
|
ramc = of_id->data;
|
|
if (!standby)
|
|
standby = ramc->idle;
|
|
soc_pm.data.memctrl = ramc->memctrl;
|
|
|
|
idx++;
|
|
}
|
|
|
|
if (!idx)
|
|
panic(pr_fmt("unable to find compatible ram controller node in dtb\n"));
|
|
|
|
if (!standby) {
|
|
pr_warn("ramc no standby function available\n");
|
|
return;
|
|
}
|
|
|
|
at91_cpuidle_device.dev.platform_data = standby;
|
|
}
|
|
|
|
static void at91rm9200_idle(void)
|
|
{
|
|
/*
|
|
* Disable the processor clock. The processor will be automatically
|
|
* re-enabled by an interrupt or by a reset.
|
|
*/
|
|
writel(AT91_PMC_PCK, soc_pm.data.pmc + AT91_PMC_SCDR);
|
|
}
|
|
|
|
static void at91sam9_idle(void)
|
|
{
|
|
writel(AT91_PMC_PCK, soc_pm.data.pmc + AT91_PMC_SCDR);
|
|
cpu_do_idle();
|
|
}
|
|
|
|
static void __init at91_pm_sram_init(void)
|
|
{
|
|
struct gen_pool *sram_pool;
|
|
phys_addr_t sram_pbase;
|
|
unsigned long sram_base;
|
|
struct device_node *node;
|
|
struct platform_device *pdev = NULL;
|
|
|
|
for_each_compatible_node(node, NULL, "mmio-sram") {
|
|
pdev = of_find_device_by_node(node);
|
|
if (pdev) {
|
|
of_node_put(node);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!pdev) {
|
|
pr_warn("%s: failed to find sram device!\n", __func__);
|
|
return;
|
|
}
|
|
|
|
sram_pool = gen_pool_get(&pdev->dev, NULL);
|
|
if (!sram_pool) {
|
|
pr_warn("%s: sram pool unavailable!\n", __func__);
|
|
goto out_put_device;
|
|
}
|
|
|
|
sram_base = gen_pool_alloc(sram_pool, at91_pm_suspend_in_sram_sz);
|
|
if (!sram_base) {
|
|
pr_warn("%s: unable to alloc sram!\n", __func__);
|
|
goto out_put_device;
|
|
}
|
|
|
|
sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
|
|
at91_suspend_sram_fn = __arm_ioremap_exec(sram_pbase,
|
|
at91_pm_suspend_in_sram_sz, false);
|
|
if (!at91_suspend_sram_fn) {
|
|
pr_warn("SRAM: Could not map\n");
|
|
goto out_put_device;
|
|
}
|
|
|
|
/* Copy the pm suspend handler to SRAM */
|
|
at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn,
|
|
&at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz);
|
|
return;
|
|
|
|
out_put_device:
|
|
put_device(&pdev->dev);
|
|
return;
|
|
}
|
|
|
|
static bool __init at91_is_pm_mode_active(int pm_mode)
|
|
{
|
|
return (soc_pm.data.standby_mode == pm_mode ||
|
|
soc_pm.data.suspend_mode == pm_mode);
|
|
}
|
|
|
|
static int __init at91_pm_backup_init(void)
|
|
{
|
|
struct gen_pool *sram_pool;
|
|
struct device_node *np;
|
|
struct platform_device *pdev = NULL;
|
|
int ret = -ENODEV;
|
|
|
|
if (!IS_ENABLED(CONFIG_SOC_SAMA5D2))
|
|
return -EPERM;
|
|
|
|
if (!at91_is_pm_mode_active(AT91_PM_BACKUP))
|
|
return 0;
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-sfrbu");
|
|
if (!np) {
|
|
pr_warn("%s: failed to find sfrbu!\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
soc_pm.data.sfrbu = of_iomap(np, 0);
|
|
of_node_put(np);
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-securam");
|
|
if (!np)
|
|
goto securam_fail_no_ref_dev;
|
|
|
|
pdev = of_find_device_by_node(np);
|
|
of_node_put(np);
|
|
if (!pdev) {
|
|
pr_warn("%s: failed to find securam device!\n", __func__);
|
|
goto securam_fail_no_ref_dev;
|
|
}
|
|
|
|
sram_pool = gen_pool_get(&pdev->dev, NULL);
|
|
if (!sram_pool) {
|
|
pr_warn("%s: securam pool unavailable!\n", __func__);
|
|
goto securam_fail;
|
|
}
|
|
|
|
pm_bu = (void *)gen_pool_alloc(sram_pool, sizeof(struct at91_pm_bu));
|
|
if (!pm_bu) {
|
|
pr_warn("%s: unable to alloc securam!\n", __func__);
|
|
ret = -ENOMEM;
|
|
goto securam_fail;
|
|
}
|
|
|
|
pm_bu->suspended = 0;
|
|
pm_bu->canary = __pa_symbol(&canary);
|
|
pm_bu->resume = __pa_symbol(cpu_resume);
|
|
|
|
return 0;
|
|
|
|
securam_fail:
|
|
put_device(&pdev->dev);
|
|
securam_fail_no_ref_dev:
|
|
iounmap(soc_pm.data.sfrbu);
|
|
soc_pm.data.sfrbu = NULL;
|
|
return ret;
|
|
}
|
|
|
|
static void __init at91_pm_use_default_mode(int pm_mode)
|
|
{
|
|
if (pm_mode != AT91_PM_ULP1 && pm_mode != AT91_PM_BACKUP)
|
|
return;
|
|
|
|
if (soc_pm.data.standby_mode == pm_mode)
|
|
soc_pm.data.standby_mode = AT91_PM_ULP0;
|
|
if (soc_pm.data.suspend_mode == pm_mode)
|
|
soc_pm.data.suspend_mode = AT91_PM_ULP0;
|
|
}
|
|
|
|
static const struct of_device_id atmel_shdwc_ids[] = {
|
|
{ .compatible = "atmel,sama5d2-shdwc" },
|
|
{ .compatible = "microchip,sam9x60-shdwc" },
|
|
{ /* sentinel. */ }
|
|
};
|
|
|
|
static void __init at91_pm_modes_init(void)
|
|
{
|
|
struct device_node *np;
|
|
int ret;
|
|
|
|
if (!at91_is_pm_mode_active(AT91_PM_BACKUP) &&
|
|
!at91_is_pm_mode_active(AT91_PM_ULP1))
|
|
return;
|
|
|
|
np = of_find_matching_node(NULL, atmel_shdwc_ids);
|
|
if (!np) {
|
|
pr_warn("%s: failed to find shdwc!\n", __func__);
|
|
goto ulp1_default;
|
|
}
|
|
|
|
soc_pm.data.shdwc = of_iomap(np, 0);
|
|
of_node_put(np);
|
|
|
|
ret = at91_pm_backup_init();
|
|
if (ret) {
|
|
if (!at91_is_pm_mode_active(AT91_PM_ULP1))
|
|
goto unmap;
|
|
else
|
|
goto backup_default;
|
|
}
|
|
|
|
return;
|
|
|
|
unmap:
|
|
iounmap(soc_pm.data.shdwc);
|
|
soc_pm.data.shdwc = NULL;
|
|
ulp1_default:
|
|
at91_pm_use_default_mode(AT91_PM_ULP1);
|
|
backup_default:
|
|
at91_pm_use_default_mode(AT91_PM_BACKUP);
|
|
}
|
|
|
|
struct pmc_info {
|
|
unsigned long uhp_udp_mask;
|
|
unsigned long mckr;
|
|
unsigned long version;
|
|
};
|
|
|
|
static const struct pmc_info pmc_infos[] __initconst = {
|
|
{
|
|
.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP,
|
|
.mckr = 0x30,
|
|
.version = AT91_PMC_V1,
|
|
},
|
|
|
|
{
|
|
.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP,
|
|
.mckr = 0x30,
|
|
.version = AT91_PMC_V1,
|
|
},
|
|
{
|
|
.uhp_udp_mask = AT91SAM926x_PMC_UHP,
|
|
.mckr = 0x30,
|
|
.version = AT91_PMC_V1,
|
|
},
|
|
{ .uhp_udp_mask = 0,
|
|
.mckr = 0x30,
|
|
.version = AT91_PMC_V1,
|
|
},
|
|
{
|
|
.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP,
|
|
.mckr = 0x28,
|
|
.version = AT91_PMC_V2,
|
|
},
|
|
};
|
|
|
|
static const struct of_device_id atmel_pmc_ids[] __initconst = {
|
|
{ .compatible = "atmel,at91rm9200-pmc", .data = &pmc_infos[0] },
|
|
{ .compatible = "atmel,at91sam9260-pmc", .data = &pmc_infos[1] },
|
|
{ .compatible = "atmel,at91sam9261-pmc", .data = &pmc_infos[1] },
|
|
{ .compatible = "atmel,at91sam9263-pmc", .data = &pmc_infos[1] },
|
|
{ .compatible = "atmel,at91sam9g45-pmc", .data = &pmc_infos[2] },
|
|
{ .compatible = "atmel,at91sam9n12-pmc", .data = &pmc_infos[1] },
|
|
{ .compatible = "atmel,at91sam9rl-pmc", .data = &pmc_infos[3] },
|
|
{ .compatible = "atmel,at91sam9x5-pmc", .data = &pmc_infos[1] },
|
|
{ .compatible = "atmel,sama5d3-pmc", .data = &pmc_infos[1] },
|
|
{ .compatible = "atmel,sama5d4-pmc", .data = &pmc_infos[1] },
|
|
{ .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] },
|
|
{ .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[4] },
|
|
{ /* sentinel */ },
|
|
};
|
|
|
|
static void __init at91_pm_modes_validate(const int *modes, int len)
|
|
{
|
|
u8 i, standby = 0, suspend = 0;
|
|
int mode;
|
|
|
|
for (i = 0; i < len; i++) {
|
|
if (standby && suspend)
|
|
break;
|
|
|
|
if (modes[i] == soc_pm.data.standby_mode && !standby) {
|
|
standby = 1;
|
|
continue;
|
|
}
|
|
|
|
if (modes[i] == soc_pm.data.suspend_mode && !suspend) {
|
|
suspend = 1;
|
|
continue;
|
|
}
|
|
}
|
|
|
|
if (!standby) {
|
|
if (soc_pm.data.suspend_mode == AT91_PM_STANDBY)
|
|
mode = AT91_PM_ULP0;
|
|
else
|
|
mode = AT91_PM_STANDBY;
|
|
|
|
pr_warn("AT91: PM: %s mode not supported! Using %s.\n",
|
|
pm_modes[soc_pm.data.standby_mode].pattern,
|
|
pm_modes[mode].pattern);
|
|
soc_pm.data.standby_mode = mode;
|
|
}
|
|
|
|
if (!suspend) {
|
|
if (soc_pm.data.standby_mode == AT91_PM_ULP0)
|
|
mode = AT91_PM_STANDBY;
|
|
else
|
|
mode = AT91_PM_ULP0;
|
|
|
|
pr_warn("AT91: PM: %s mode not supported! Using %s.\n",
|
|
pm_modes[soc_pm.data.suspend_mode].pattern,
|
|
pm_modes[mode].pattern);
|
|
soc_pm.data.suspend_mode = mode;
|
|
}
|
|
}
|
|
|
|
static void __init at91_pm_init(void (*pm_idle)(void))
|
|
{
|
|
struct device_node *pmc_np;
|
|
const struct of_device_id *of_id;
|
|
const struct pmc_info *pmc;
|
|
|
|
if (at91_cpuidle_device.dev.platform_data)
|
|
platform_device_register(&at91_cpuidle_device);
|
|
|
|
pmc_np = of_find_matching_node_and_match(NULL, atmel_pmc_ids, &of_id);
|
|
soc_pm.data.pmc = of_iomap(pmc_np, 0);
|
|
of_node_put(pmc_np);
|
|
if (!soc_pm.data.pmc) {
|
|
pr_err("AT91: PM not supported, PMC not found\n");
|
|
return;
|
|
}
|
|
|
|
pmc = of_id->data;
|
|
soc_pm.data.uhp_udp_mask = pmc->uhp_udp_mask;
|
|
soc_pm.data.pmc_mckr_offset = pmc->mckr;
|
|
soc_pm.data.pmc_version = pmc->version;
|
|
|
|
if (pm_idle)
|
|
arm_pm_idle = pm_idle;
|
|
|
|
at91_pm_sram_init();
|
|
|
|
if (at91_suspend_sram_fn) {
|
|
suspend_set_ops(&at91_pm_ops);
|
|
pr_info("AT91: PM: standby: %s, suspend: %s\n",
|
|
pm_modes[soc_pm.data.standby_mode].pattern,
|
|
pm_modes[soc_pm.data.suspend_mode].pattern);
|
|
} else {
|
|
pr_info("AT91: PM not supported, due to no SRAM allocated\n");
|
|
}
|
|
}
|
|
|
|
void __init at91rm9200_pm_init(void)
|
|
{
|
|
if (!IS_ENABLED(CONFIG_SOC_AT91RM9200))
|
|
return;
|
|
|
|
/*
|
|
* Force STANDBY and ULP0 mode to avoid calling
|
|
* at91_pm_modes_validate() which may increase booting time.
|
|
* Platform supports anyway only STANDBY and ULP0 modes.
|
|
*/
|
|
soc_pm.data.standby_mode = AT91_PM_STANDBY;
|
|
soc_pm.data.suspend_mode = AT91_PM_ULP0;
|
|
|
|
at91_dt_ramc();
|
|
|
|
/*
|
|
* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh.
|
|
*/
|
|
at91_ramc_write(0, AT91_MC_SDRAMC_LPR, 0);
|
|
|
|
at91_pm_init(at91rm9200_idle);
|
|
}
|
|
|
|
void __init sam9x60_pm_init(void)
|
|
{
|
|
static const int modes[] __initconst = {
|
|
AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST, AT91_PM_ULP1,
|
|
};
|
|
|
|
if (!IS_ENABLED(CONFIG_SOC_SAM9X60))
|
|
return;
|
|
|
|
at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
|
|
at91_pm_modes_init();
|
|
at91_dt_ramc();
|
|
at91_pm_init(NULL);
|
|
|
|
soc_pm.ws_ids = sam9x60_ws_ids;
|
|
soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws;
|
|
}
|
|
|
|
void __init at91sam9_pm_init(void)
|
|
{
|
|
if (!IS_ENABLED(CONFIG_SOC_AT91SAM9))
|
|
return;
|
|
|
|
/*
|
|
* Force STANDBY and ULP0 mode to avoid calling
|
|
* at91_pm_modes_validate() which may increase booting time.
|
|
* Platform supports anyway only STANDBY and ULP0 modes.
|
|
*/
|
|
soc_pm.data.standby_mode = AT91_PM_STANDBY;
|
|
soc_pm.data.suspend_mode = AT91_PM_ULP0;
|
|
|
|
at91_dt_ramc();
|
|
at91_pm_init(at91sam9_idle);
|
|
}
|
|
|
|
void __init sama5_pm_init(void)
|
|
{
|
|
static const int modes[] __initconst = {
|
|
AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST,
|
|
};
|
|
|
|
if (!IS_ENABLED(CONFIG_SOC_SAMA5))
|
|
return;
|
|
|
|
at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
|
|
at91_dt_ramc();
|
|
at91_pm_init(NULL);
|
|
}
|
|
|
|
void __init sama5d2_pm_init(void)
|
|
{
|
|
static const int modes[] __initconst = {
|
|
AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST, AT91_PM_ULP1,
|
|
AT91_PM_BACKUP,
|
|
};
|
|
|
|
if (!IS_ENABLED(CONFIG_SOC_SAMA5D2))
|
|
return;
|
|
|
|
at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
|
|
at91_pm_modes_init();
|
|
at91_dt_ramc();
|
|
at91_pm_init(NULL);
|
|
|
|
soc_pm.ws_ids = sama5d2_ws_ids;
|
|
soc_pm.config_shdwc_ws = at91_sama5d2_config_shdwc_ws;
|
|
soc_pm.config_pmc_ws = at91_sama5d2_config_pmc_ws;
|
|
}
|
|
|
|
static int __init at91_pm_modes_select(char *str)
|
|
{
|
|
char *s;
|
|
substring_t args[MAX_OPT_ARGS];
|
|
int standby, suspend;
|
|
|
|
if (!str)
|
|
return 0;
|
|
|
|
s = strsep(&str, ",");
|
|
standby = match_token(s, pm_modes, args);
|
|
if (standby < 0)
|
|
return 0;
|
|
|
|
suspend = match_token(str, pm_modes, args);
|
|
if (suspend < 0)
|
|
return 0;
|
|
|
|
soc_pm.data.standby_mode = standby;
|
|
soc_pm.data.suspend_mode = suspend;
|
|
|
|
return 0;
|
|
}
|
|
early_param("atmel.pm_modes", at91_pm_modes_select);
|