61 lines
2.0 KiB
Plaintext
61 lines
2.0 KiB
Plaintext
MIPS Global Interrupt Controller (GIC)
|
|
|
|
The MIPS GIC routes external interrupts to individual VPEs and IRQ pins.
|
|
It also supports local (per-processor) interrupts and software-generated
|
|
interrupts which can be used as IPIs. The GIC also includes a free-running
|
|
global timer, per-CPU count/compare timers, and a watchdog.
|
|
|
|
Required properties:
|
|
- compatible : Should be "mti,gic".
|
|
- interrupt-controller : Identifies the node as an interrupt controller
|
|
- #interrupt-cells : Specifies the number of cells needed to encode an
|
|
interrupt specifier. Should be 3.
|
|
- The first cell is the type of interrupt, local or shared.
|
|
See <include/dt-bindings/interrupt-controller/mips-gic.h>.
|
|
- The second cell is the GIC interrupt number.
|
|
- The third cell encodes the interrupt flags.
|
|
See <include/dt-bindings/interrupt-controller/irq.h> for a list of valid
|
|
flags.
|
|
|
|
Optional properties:
|
|
- reg : Base address and length of the GIC registers. If not present,
|
|
the base address reported by the hardware GCR_GIC_BASE will be used.
|
|
- mti,reserved-cpu-vectors : Specifies the list of CPU interrupt vectors
|
|
to which the GIC may not route interrupts. Valid values are 2 - 7.
|
|
This property is ignored if the CPU is started in EIC mode.
|
|
|
|
Required properties for timer sub-node:
|
|
- compatible : Should be "mti,gic-timer".
|
|
- interrupts : Interrupt for the GIC local timer.
|
|
|
|
Optional properties for timer sub-node:
|
|
- clocks : GIC timer operating clock.
|
|
- clock-frequency : Clock frequency at which the GIC timers operate.
|
|
|
|
Note that one of clocks or clock-frequency must be specified.
|
|
|
|
Example:
|
|
|
|
gic: interrupt-controller@1bdc0000 {
|
|
compatible = "mti,gic";
|
|
reg = <0x1bdc0000 0x20000>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
|
|
mti,reserved-cpu-vectors = <7>;
|
|
|
|
timer {
|
|
compatible = "mti,gic-timer";
|
|
interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
|
|
clock-frequency = <50000000>;
|
|
};
|
|
};
|
|
|
|
uart@18101400 {
|
|
...
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
|
|
...
|
|
};
|