169 lines
4.3 KiB
C
169 lines
4.3 KiB
C
/*
|
|
* drivers/i2c/busses/i2c-ixp2000.c
|
|
*
|
|
* I2C adapter for IXP2000 systems using GPIOs for I2C bus
|
|
*
|
|
* Author: Deepak Saxena <dsaxena@plexity.net>
|
|
* Based on IXDP2400 code by: Naeem M. Afzal <naeem.m.afzal@intel.com>
|
|
* Made generic by: Jeff Daly <jeffrey.daly@intel.com>
|
|
*
|
|
* Copyright (c) 2003-2004 MontaVista Software Inc.
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*
|
|
* From Jeff Daly:
|
|
*
|
|
* I2C adapter driver for Intel IXDP2xxx platforms. This should work for any
|
|
* IXP2000 platform if it uses the HW GPIO in the same manner. Basically,
|
|
* SDA and SCL GPIOs have external pullups. Setting the respective GPIO to
|
|
* an input will make the signal a '1' via the pullup. Setting them to
|
|
* outputs will pull them down.
|
|
*
|
|
* The GPIOs are open drain signals and are used as configuration strap inputs
|
|
* during power-up so there's generally a buffer on the board that needs to be
|
|
* 'enabled' to drive the GPIOs.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c-algo-bit.h>
|
|
|
|
#include <asm/hardware.h> /* Pick up IXP2000-specific bits */
|
|
#include <asm/arch/gpio.h>
|
|
|
|
static inline int ixp2000_scl_pin(void *data)
|
|
{
|
|
return ((struct ixp2000_i2c_pins*)data)->scl_pin;
|
|
}
|
|
|
|
static inline int ixp2000_sda_pin(void *data)
|
|
{
|
|
return ((struct ixp2000_i2c_pins*)data)->sda_pin;
|
|
}
|
|
|
|
|
|
static void ixp2000_bit_setscl(void *data, int val)
|
|
{
|
|
int i = 5000;
|
|
|
|
if (val) {
|
|
gpio_line_config(ixp2000_scl_pin(data), GPIO_IN);
|
|
while(!gpio_line_get(ixp2000_scl_pin(data)) && i--);
|
|
} else {
|
|
gpio_line_config(ixp2000_scl_pin(data), GPIO_OUT);
|
|
}
|
|
}
|
|
|
|
static void ixp2000_bit_setsda(void *data, int val)
|
|
{
|
|
if (val) {
|
|
gpio_line_config(ixp2000_sda_pin(data), GPIO_IN);
|
|
} else {
|
|
gpio_line_config(ixp2000_sda_pin(data), GPIO_OUT);
|
|
}
|
|
}
|
|
|
|
static int ixp2000_bit_getscl(void *data)
|
|
{
|
|
return gpio_line_get(ixp2000_scl_pin(data));
|
|
}
|
|
|
|
static int ixp2000_bit_getsda(void *data)
|
|
{
|
|
return gpio_line_get(ixp2000_sda_pin(data));
|
|
}
|
|
|
|
struct ixp2000_i2c_data {
|
|
struct ixp2000_i2c_pins *gpio_pins;
|
|
struct i2c_adapter adapter;
|
|
struct i2c_algo_bit_data algo_data;
|
|
};
|
|
|
|
static int ixp2000_i2c_remove(struct platform_device *plat_dev)
|
|
{
|
|
struct ixp2000_i2c_data *drv_data = platform_get_drvdata(plat_dev);
|
|
|
|
platform_set_drvdata(plat_dev, NULL);
|
|
|
|
i2c_del_adapter(&drv_data->adapter);
|
|
|
|
kfree(drv_data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ixp2000_i2c_probe(struct platform_device *plat_dev)
|
|
{
|
|
int err;
|
|
struct ixp2000_i2c_pins *gpio = plat_dev->dev.platform_data;
|
|
struct ixp2000_i2c_data *drv_data =
|
|
kzalloc(sizeof(struct ixp2000_i2c_data), GFP_KERNEL);
|
|
|
|
if (!drv_data)
|
|
return -ENOMEM;
|
|
drv_data->gpio_pins = gpio;
|
|
|
|
drv_data->algo_data.data = gpio;
|
|
drv_data->algo_data.setsda = ixp2000_bit_setsda;
|
|
drv_data->algo_data.setscl = ixp2000_bit_setscl;
|
|
drv_data->algo_data.getsda = ixp2000_bit_getsda;
|
|
drv_data->algo_data.getscl = ixp2000_bit_getscl;
|
|
drv_data->algo_data.udelay = 6;
|
|
drv_data->algo_data.timeout = 100;
|
|
|
|
drv_data->adapter.id = I2C_HW_B_IXP2000,
|
|
strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name,
|
|
sizeof(drv_data->adapter.name));
|
|
drv_data->adapter.algo_data = &drv_data->algo_data,
|
|
|
|
drv_data->adapter.dev.parent = &plat_dev->dev;
|
|
|
|
gpio_line_config(gpio->sda_pin, GPIO_IN);
|
|
gpio_line_config(gpio->scl_pin, GPIO_IN);
|
|
gpio_line_set(gpio->scl_pin, 0);
|
|
gpio_line_set(gpio->sda_pin, 0);
|
|
|
|
if ((err = i2c_bit_add_bus(&drv_data->adapter)) != 0) {
|
|
dev_err(&plat_dev->dev, "Could not install, error %d\n", err);
|
|
kfree(drv_data);
|
|
return err;
|
|
}
|
|
|
|
platform_set_drvdata(plat_dev, drv_data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver ixp2000_i2c_driver = {
|
|
.probe = ixp2000_i2c_probe,
|
|
.remove = ixp2000_i2c_remove,
|
|
.driver = {
|
|
.name = "IXP2000-I2C",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
static int __init ixp2000_i2c_init(void)
|
|
{
|
|
return platform_driver_register(&ixp2000_i2c_driver);
|
|
}
|
|
|
|
static void __exit ixp2000_i2c_exit(void)
|
|
{
|
|
platform_driver_unregister(&ixp2000_i2c_driver);
|
|
}
|
|
|
|
module_init(ixp2000_i2c_init);
|
|
module_exit(ixp2000_i2c_exit);
|
|
|
|
MODULE_AUTHOR ("Deepak Saxena <dsaxena@plexity.net>");
|
|
MODULE_DESCRIPTION("IXP2000 GPIO-based I2C bus driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:IXP2000-I2C");
|
|
|