453 lines
13 KiB
C
453 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) STMicroelectronics SA 2017
|
|
*
|
|
* Authors: Philippe Cornu <philippe.cornu@st.com>
|
|
* Yannick Fertre <yannick.fertre@st.com>
|
|
*/
|
|
|
|
#include <linux/backlight.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/module.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include <video/mipi_display.h>
|
|
|
|
#include <drm/drm_mipi_dsi.h>
|
|
#include <drm/drm_modes.h>
|
|
#include <drm/drm_panel.h>
|
|
#include <drm/drm_print.h>
|
|
|
|
/*** Manufacturer Command Set ***/
|
|
#define MCS_CMD_MODE_SW 0xFE /* CMD Mode Switch */
|
|
#define MCS_CMD1_UCS 0x00 /* User Command Set (UCS = CMD1) */
|
|
#define MCS_CMD2_P0 0x01 /* Manufacture Command Set Page0 (CMD2 P0) */
|
|
#define MCS_CMD2_P1 0x02 /* Manufacture Command Set Page1 (CMD2 P1) */
|
|
#define MCS_CMD2_P2 0x03 /* Manufacture Command Set Page2 (CMD2 P2) */
|
|
#define MCS_CMD2_P3 0x04 /* Manufacture Command Set Page3 (CMD2 P3) */
|
|
|
|
/* CMD2 P0 commands (Display Options and Power) */
|
|
#define MCS_STBCTR 0x12 /* TE1 Output Setting Zig-Zag Connection */
|
|
#define MCS_SGOPCTR 0x16 /* Source Bias Current */
|
|
#define MCS_SDCTR 0x1A /* Source Output Delay Time */
|
|
#define MCS_INVCTR 0x1B /* Inversion Type */
|
|
#define MCS_EXT_PWR_IC 0x24 /* External PWR IC Control */
|
|
#define MCS_SETAVDD 0x27 /* PFM Control for AVDD Output */
|
|
#define MCS_SETAVEE 0x29 /* PFM Control for AVEE Output */
|
|
#define MCS_BT2CTR 0x2B /* DDVDL Charge Pump Control */
|
|
#define MCS_BT3CTR 0x2F /* VGH Charge Pump Control */
|
|
#define MCS_BT4CTR 0x34 /* VGL Charge Pump Control */
|
|
#define MCS_VCMCTR 0x46 /* VCOM Output Level Control */
|
|
#define MCS_SETVGN 0x52 /* VG M/S N Control */
|
|
#define MCS_SETVGP 0x54 /* VG M/S P Control */
|
|
#define MCS_SW_CTRL 0x5F /* Interface Control for PFM and MIPI */
|
|
|
|
/* CMD2 P2 commands (GOA Timing Control) - no description in datasheet */
|
|
#define GOA_VSTV1 0x00
|
|
#define GOA_VSTV2 0x07
|
|
#define GOA_VCLK1 0x0E
|
|
#define GOA_VCLK2 0x17
|
|
#define GOA_VCLK_OPT1 0x20
|
|
#define GOA_BICLK1 0x2A
|
|
#define GOA_BICLK2 0x37
|
|
#define GOA_BICLK3 0x44
|
|
#define GOA_BICLK4 0x4F
|
|
#define GOA_BICLK_OPT1 0x5B
|
|
#define GOA_BICLK_OPT2 0x60
|
|
#define MCS_GOA_GPO1 0x6D
|
|
#define MCS_GOA_GPO2 0x71
|
|
#define MCS_GOA_EQ 0x74
|
|
#define MCS_GOA_CLK_GALLON 0x7C
|
|
#define MCS_GOA_FS_SEL0 0x7E
|
|
#define MCS_GOA_FS_SEL1 0x87
|
|
#define MCS_GOA_FS_SEL2 0x91
|
|
#define MCS_GOA_FS_SEL3 0x9B
|
|
#define MCS_GOA_BS_SEL0 0xAC
|
|
#define MCS_GOA_BS_SEL1 0xB5
|
|
#define MCS_GOA_BS_SEL2 0xBF
|
|
#define MCS_GOA_BS_SEL3 0xC9
|
|
#define MCS_GOA_BS_SEL4 0xD3
|
|
|
|
/* CMD2 P3 commands (Gamma) */
|
|
#define MCS_GAMMA_VP 0x60 /* Gamma VP1~VP16 */
|
|
#define MCS_GAMMA_VN 0x70 /* Gamma VN1~VN16 */
|
|
|
|
struct rm68200 {
|
|
struct device *dev;
|
|
struct drm_panel panel;
|
|
struct gpio_desc *reset_gpio;
|
|
struct regulator *supply;
|
|
struct backlight_device *backlight;
|
|
bool prepared;
|
|
bool enabled;
|
|
};
|
|
|
|
static const struct drm_display_mode default_mode = {
|
|
.clock = 52582,
|
|
.hdisplay = 720,
|
|
.hsync_start = 720 + 38,
|
|
.hsync_end = 720 + 38 + 8,
|
|
.htotal = 720 + 38 + 8 + 38,
|
|
.vdisplay = 1280,
|
|
.vsync_start = 1280 + 12,
|
|
.vsync_end = 1280 + 12 + 4,
|
|
.vtotal = 1280 + 12 + 4 + 12,
|
|
.vrefresh = 50,
|
|
.flags = 0,
|
|
.width_mm = 68,
|
|
.height_mm = 122,
|
|
};
|
|
|
|
static inline struct rm68200 *panel_to_rm68200(struct drm_panel *panel)
|
|
{
|
|
return container_of(panel, struct rm68200, panel);
|
|
}
|
|
|
|
static void rm68200_dcs_write_buf(struct rm68200 *ctx, const void *data,
|
|
size_t len)
|
|
{
|
|
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
|
|
int err;
|
|
|
|
err = mipi_dsi_dcs_write_buffer(dsi, data, len);
|
|
if (err < 0)
|
|
DRM_ERROR_RATELIMITED("MIPI DSI DCS write buffer failed: %d\n",
|
|
err);
|
|
}
|
|
|
|
static void rm68200_dcs_write_cmd(struct rm68200 *ctx, u8 cmd, u8 value)
|
|
{
|
|
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
|
|
int err;
|
|
|
|
err = mipi_dsi_dcs_write(dsi, cmd, &value, 1);
|
|
if (err < 0)
|
|
DRM_ERROR_RATELIMITED("MIPI DSI DCS write failed: %d\n", err);
|
|
}
|
|
|
|
#define dcs_write_seq(ctx, seq...) \
|
|
({ \
|
|
static const u8 d[] = { seq }; \
|
|
\
|
|
rm68200_dcs_write_buf(ctx, d, ARRAY_SIZE(d)); \
|
|
})
|
|
|
|
/*
|
|
* This panel is not able to auto-increment all cmd addresses so for some of
|
|
* them, we need to send them one by one...
|
|
*/
|
|
#define dcs_write_cmd_seq(ctx, cmd, seq...) \
|
|
({ \
|
|
static const u8 d[] = { seq }; \
|
|
unsigned int i; \
|
|
\
|
|
for (i = 0; i < ARRAY_SIZE(d) ; i++) \
|
|
rm68200_dcs_write_cmd(ctx, cmd + i, d[i]); \
|
|
})
|
|
|
|
static void rm68200_init_sequence(struct rm68200 *ctx)
|
|
{
|
|
/* Enter CMD2 with page 0 */
|
|
dcs_write_seq(ctx, MCS_CMD_MODE_SW, MCS_CMD2_P0);
|
|
dcs_write_cmd_seq(ctx, MCS_EXT_PWR_IC, 0xC0, 0x53, 0x00);
|
|
dcs_write_seq(ctx, MCS_BT2CTR, 0xE5);
|
|
dcs_write_seq(ctx, MCS_SETAVDD, 0x0A);
|
|
dcs_write_seq(ctx, MCS_SETAVEE, 0x0A);
|
|
dcs_write_seq(ctx, MCS_SGOPCTR, 0x52);
|
|
dcs_write_seq(ctx, MCS_BT3CTR, 0x53);
|
|
dcs_write_seq(ctx, MCS_BT4CTR, 0x5A);
|
|
dcs_write_seq(ctx, MCS_INVCTR, 0x00);
|
|
dcs_write_seq(ctx, MCS_STBCTR, 0x0A);
|
|
dcs_write_seq(ctx, MCS_SDCTR, 0x06);
|
|
dcs_write_seq(ctx, MCS_VCMCTR, 0x56);
|
|
dcs_write_seq(ctx, MCS_SETVGN, 0xA0, 0x00);
|
|
dcs_write_seq(ctx, MCS_SETVGP, 0xA0, 0x00);
|
|
dcs_write_seq(ctx, MCS_SW_CTRL, 0x11); /* 2 data lanes, see doc */
|
|
|
|
dcs_write_seq(ctx, MCS_CMD_MODE_SW, MCS_CMD2_P2);
|
|
dcs_write_seq(ctx, GOA_VSTV1, 0x05);
|
|
dcs_write_seq(ctx, 0x02, 0x0B);
|
|
dcs_write_seq(ctx, 0x03, 0x0F);
|
|
dcs_write_seq(ctx, 0x04, 0x7D, 0x00, 0x50);
|
|
dcs_write_cmd_seq(ctx, GOA_VSTV2, 0x05, 0x16, 0x0D, 0x11, 0x7D, 0x00,
|
|
0x50);
|
|
dcs_write_cmd_seq(ctx, GOA_VCLK1, 0x07, 0x08, 0x01, 0x02, 0x00, 0x7D,
|
|
0x00, 0x85, 0x08);
|
|
dcs_write_cmd_seq(ctx, GOA_VCLK2, 0x03, 0x04, 0x05, 0x06, 0x00, 0x7D,
|
|
0x00, 0x85, 0x08);
|
|
dcs_write_seq(ctx, GOA_VCLK_OPT1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00);
|
|
dcs_write_cmd_seq(ctx, GOA_BICLK1, 0x07, 0x08);
|
|
dcs_write_seq(ctx, 0x2D, 0x01);
|
|
dcs_write_seq(ctx, 0x2F, 0x02, 0x00, 0x40, 0x05, 0x08, 0x54, 0x7D,
|
|
0x00);
|
|
dcs_write_cmd_seq(ctx, GOA_BICLK2, 0x03, 0x04, 0x05, 0x06, 0x00);
|
|
dcs_write_seq(ctx, 0x3D, 0x40);
|
|
dcs_write_seq(ctx, 0x3F, 0x05, 0x08, 0x54, 0x7D, 0x00);
|
|
dcs_write_seq(ctx, GOA_BICLK3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00);
|
|
dcs_write_seq(ctx, GOA_BICLK4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00);
|
|
dcs_write_seq(ctx, 0x58, 0x00, 0x00, 0x00);
|
|
dcs_write_seq(ctx, GOA_BICLK_OPT1, 0x00, 0x00, 0x00, 0x00, 0x00);
|
|
dcs_write_seq(ctx, GOA_BICLK_OPT2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
|
|
dcs_write_seq(ctx, MCS_GOA_GPO1, 0x00, 0x00, 0x00, 0x00);
|
|
dcs_write_seq(ctx, MCS_GOA_GPO2, 0x00, 0x20, 0x00);
|
|
dcs_write_seq(ctx, MCS_GOA_EQ, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
|
|
0x00, 0x00);
|
|
dcs_write_seq(ctx, MCS_GOA_CLK_GALLON, 0x00, 0x00);
|
|
dcs_write_cmd_seq(ctx, MCS_GOA_FS_SEL0, 0xBF, 0x02, 0x06, 0x14, 0x10,
|
|
0x16, 0x12, 0x08, 0x3F);
|
|
dcs_write_cmd_seq(ctx, MCS_GOA_FS_SEL1, 0x3F, 0x3F, 0x3F, 0x3F, 0x0C,
|
|
0x0A, 0x0E, 0x3F, 0x3F, 0x00);
|
|
dcs_write_cmd_seq(ctx, MCS_GOA_FS_SEL2, 0x04, 0x3F, 0x3F, 0x3F, 0x3F,
|
|
0x05, 0x01, 0x3F, 0x3F, 0x0F);
|
|
dcs_write_cmd_seq(ctx, MCS_GOA_FS_SEL3, 0x0B, 0x0D, 0x3F, 0x3F, 0x3F,
|
|
0x3F);
|
|
dcs_write_cmd_seq(ctx, 0xA2, 0x3F, 0x09, 0x13, 0x17, 0x11, 0x15);
|
|
dcs_write_cmd_seq(ctx, 0xA9, 0x07, 0x03, 0x3F);
|
|
dcs_write_cmd_seq(ctx, MCS_GOA_BS_SEL0, 0x3F, 0x05, 0x01, 0x17, 0x13,
|
|
0x15, 0x11, 0x0F, 0x3F);
|
|
dcs_write_cmd_seq(ctx, MCS_GOA_BS_SEL1, 0x3F, 0x3F, 0x3F, 0x3F, 0x0B,
|
|
0x0D, 0x09, 0x3F, 0x3F, 0x07);
|
|
dcs_write_cmd_seq(ctx, MCS_GOA_BS_SEL2, 0x03, 0x3F, 0x3F, 0x3F, 0x3F,
|
|
0x02, 0x06, 0x3F, 0x3F, 0x08);
|
|
dcs_write_cmd_seq(ctx, MCS_GOA_BS_SEL3, 0x0C, 0x0A, 0x3F, 0x3F, 0x3F,
|
|
0x3F, 0x3F, 0x0E, 0x10, 0x14);
|
|
dcs_write_cmd_seq(ctx, MCS_GOA_BS_SEL4, 0x12, 0x16, 0x00, 0x04, 0x3F);
|
|
dcs_write_seq(ctx, 0xDC, 0x02);
|
|
dcs_write_seq(ctx, 0xDE, 0x12);
|
|
|
|
dcs_write_seq(ctx, MCS_CMD_MODE_SW, 0x0E); /* No documentation */
|
|
dcs_write_seq(ctx, 0x01, 0x75);
|
|
|
|
dcs_write_seq(ctx, MCS_CMD_MODE_SW, MCS_CMD2_P3);
|
|
dcs_write_cmd_seq(ctx, MCS_GAMMA_VP, 0x00, 0x0C, 0x12, 0x0E, 0x06,
|
|
0x12, 0x0E, 0x0B, 0x15, 0x0B, 0x10, 0x07, 0x0F,
|
|
0x12, 0x0C, 0x00);
|
|
dcs_write_cmd_seq(ctx, MCS_GAMMA_VN, 0x00, 0x0C, 0x12, 0x0E, 0x06,
|
|
0x12, 0x0E, 0x0B, 0x15, 0x0B, 0x10, 0x07, 0x0F,
|
|
0x12, 0x0C, 0x00);
|
|
|
|
/* Exit CMD2 */
|
|
dcs_write_seq(ctx, MCS_CMD_MODE_SW, MCS_CMD1_UCS);
|
|
}
|
|
|
|
static int rm68200_disable(struct drm_panel *panel)
|
|
{
|
|
struct rm68200 *ctx = panel_to_rm68200(panel);
|
|
|
|
if (!ctx->enabled)
|
|
return 0;
|
|
|
|
backlight_disable(ctx->backlight);
|
|
|
|
ctx->enabled = false;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rm68200_unprepare(struct drm_panel *panel)
|
|
{
|
|
struct rm68200 *ctx = panel_to_rm68200(panel);
|
|
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
|
|
int ret;
|
|
|
|
if (!ctx->prepared)
|
|
return 0;
|
|
|
|
ret = mipi_dsi_dcs_set_display_off(dsi);
|
|
if (ret)
|
|
DRM_WARN("failed to set display off: %d\n", ret);
|
|
|
|
ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
|
|
if (ret)
|
|
DRM_WARN("failed to enter sleep mode: %d\n", ret);
|
|
|
|
msleep(120);
|
|
|
|
if (ctx->reset_gpio) {
|
|
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
|
|
msleep(20);
|
|
}
|
|
|
|
regulator_disable(ctx->supply);
|
|
|
|
ctx->prepared = false;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rm68200_prepare(struct drm_panel *panel)
|
|
{
|
|
struct rm68200 *ctx = panel_to_rm68200(panel);
|
|
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
|
|
int ret;
|
|
|
|
if (ctx->prepared)
|
|
return 0;
|
|
|
|
ret = regulator_enable(ctx->supply);
|
|
if (ret < 0) {
|
|
DRM_ERROR("failed to enable supply: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (ctx->reset_gpio) {
|
|
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
|
|
msleep(20);
|
|
gpiod_set_value_cansleep(ctx->reset_gpio, 0);
|
|
msleep(100);
|
|
}
|
|
|
|
rm68200_init_sequence(ctx);
|
|
|
|
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
|
|
if (ret)
|
|
return ret;
|
|
|
|
msleep(125);
|
|
|
|
ret = mipi_dsi_dcs_set_display_on(dsi);
|
|
if (ret)
|
|
return ret;
|
|
|
|
msleep(20);
|
|
|
|
ctx->prepared = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rm68200_enable(struct drm_panel *panel)
|
|
{
|
|
struct rm68200 *ctx = panel_to_rm68200(panel);
|
|
|
|
if (ctx->enabled)
|
|
return 0;
|
|
|
|
backlight_enable(ctx->backlight);
|
|
|
|
ctx->enabled = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rm68200_get_modes(struct drm_panel *panel)
|
|
{
|
|
struct drm_display_mode *mode;
|
|
|
|
mode = drm_mode_duplicate(panel->drm, &default_mode);
|
|
if (!mode) {
|
|
DRM_ERROR("failed to add mode %ux%ux@%u\n",
|
|
default_mode.hdisplay, default_mode.vdisplay,
|
|
default_mode.vrefresh);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
drm_mode_set_name(mode);
|
|
|
|
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
|
|
drm_mode_probed_add(panel->connector, mode);
|
|
|
|
panel->connector->display_info.width_mm = mode->width_mm;
|
|
panel->connector->display_info.height_mm = mode->height_mm;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static const struct drm_panel_funcs rm68200_drm_funcs = {
|
|
.disable = rm68200_disable,
|
|
.unprepare = rm68200_unprepare,
|
|
.prepare = rm68200_prepare,
|
|
.enable = rm68200_enable,
|
|
.get_modes = rm68200_get_modes,
|
|
};
|
|
|
|
static int rm68200_probe(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct device *dev = &dsi->dev;
|
|
struct rm68200 *ctx;
|
|
int ret;
|
|
|
|
ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
|
|
if (!ctx)
|
|
return -ENOMEM;
|
|
|
|
ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
|
|
if (IS_ERR(ctx->reset_gpio)) {
|
|
ret = PTR_ERR(ctx->reset_gpio);
|
|
dev_err(dev, "cannot get reset GPIO: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ctx->supply = devm_regulator_get(dev, "power");
|
|
if (IS_ERR(ctx->supply)) {
|
|
ret = PTR_ERR(ctx->supply);
|
|
if (ret != -EPROBE_DEFER)
|
|
dev_err(dev, "cannot get regulator: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ctx->backlight = devm_of_find_backlight(dev);
|
|
if (IS_ERR(ctx->backlight))
|
|
return PTR_ERR(ctx->backlight);
|
|
|
|
mipi_dsi_set_drvdata(dsi, ctx);
|
|
|
|
ctx->dev = dev;
|
|
|
|
dsi->lanes = 2;
|
|
dsi->format = MIPI_DSI_FMT_RGB888;
|
|
dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
|
|
MIPI_DSI_MODE_LPM;
|
|
|
|
drm_panel_init(&ctx->panel);
|
|
ctx->panel.dev = dev;
|
|
ctx->panel.funcs = &rm68200_drm_funcs;
|
|
|
|
drm_panel_add(&ctx->panel);
|
|
|
|
ret = mipi_dsi_attach(dsi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "mipi_dsi_attach() failed: %d\n", ret);
|
|
drm_panel_remove(&ctx->panel);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rm68200_remove(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct rm68200 *ctx = mipi_dsi_get_drvdata(dsi);
|
|
|
|
mipi_dsi_detach(dsi);
|
|
drm_panel_remove(&ctx->panel);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id raydium_rm68200_of_match[] = {
|
|
{ .compatible = "raydium,rm68200" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, raydium_rm68200_of_match);
|
|
|
|
static struct mipi_dsi_driver raydium_rm68200_driver = {
|
|
.probe = rm68200_probe,
|
|
.remove = rm68200_remove,
|
|
.driver = {
|
|
.name = "panel-raydium-rm68200",
|
|
.of_match_table = raydium_rm68200_of_match,
|
|
},
|
|
};
|
|
module_mipi_dsi_driver(raydium_rm68200_driver);
|
|
|
|
MODULE_AUTHOR("Philippe Cornu <philippe.cornu@st.com>");
|
|
MODULE_AUTHOR("Yannick Fertre <yannick.fertre@st.com>");
|
|
MODULE_DESCRIPTION("DRM Driver for Raydium RM68200 MIPI DSI panel");
|
|
MODULE_LICENSE("GPL v2");
|