450 lines
13 KiB
C
450 lines
13 KiB
C
#ifndef LINUX_B43_PHY_COMMON_H_
|
|
#define LINUX_B43_PHY_COMMON_H_
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/nl80211.h>
|
|
|
|
struct b43_wldev;
|
|
|
|
/* Complex number using 2 32-bit signed integers */
|
|
struct b43_c32 { s32 i, q; };
|
|
|
|
#define CORDIC_CONVERT(value) (((value) >= 0) ? \
|
|
((((value) >> 15) + 1) >> 1) : \
|
|
-((((-(value)) >> 15) + 1) >> 1))
|
|
|
|
/* PHY register routing bits */
|
|
#define B43_PHYROUTE 0x0C00 /* PHY register routing bits mask */
|
|
#define B43_PHYROUTE_BASE 0x0000 /* Base registers */
|
|
#define B43_PHYROUTE_OFDM_GPHY 0x0400 /* OFDM register routing for G-PHYs */
|
|
#define B43_PHYROUTE_EXT_GPHY 0x0800 /* Extended G-PHY registers */
|
|
#define B43_PHYROUTE_N_BMODE 0x0C00 /* N-PHY BMODE registers */
|
|
|
|
/* CCK (B-PHY) registers. */
|
|
#define B43_PHY_CCK(reg) ((reg) | B43_PHYROUTE_BASE)
|
|
/* N-PHY registers. */
|
|
#define B43_PHY_N(reg) ((reg) | B43_PHYROUTE_BASE)
|
|
/* N-PHY BMODE registers. */
|
|
#define B43_PHY_N_BMODE(reg) ((reg) | B43_PHYROUTE_N_BMODE)
|
|
/* OFDM (A-PHY) registers. */
|
|
#define B43_PHY_OFDM(reg) ((reg) | B43_PHYROUTE_OFDM_GPHY)
|
|
/* Extended G-PHY registers. */
|
|
#define B43_PHY_EXTG(reg) ((reg) | B43_PHYROUTE_EXT_GPHY)
|
|
|
|
|
|
/* Masks for the PHY versioning registers. */
|
|
#define B43_PHYVER_ANALOG 0xF000
|
|
#define B43_PHYVER_ANALOG_SHIFT 12
|
|
#define B43_PHYVER_TYPE 0x0F00
|
|
#define B43_PHYVER_TYPE_SHIFT 8
|
|
#define B43_PHYVER_VERSION 0x00FF
|
|
|
|
/* PHY writes need to be flushed if we reach limit */
|
|
#define B43_MAX_WRITES_IN_ROW 24
|
|
|
|
/**
|
|
* enum b43_interference_mitigation - Interference Mitigation mode
|
|
*
|
|
* @B43_INTERFMODE_NONE: Disabled
|
|
* @B43_INTERFMODE_NONWLAN: Non-WLAN Interference Mitigation
|
|
* @B43_INTERFMODE_MANUALWLAN: WLAN Interference Mitigation
|
|
* @B43_INTERFMODE_AUTOWLAN: Automatic WLAN Interference Mitigation
|
|
*/
|
|
enum b43_interference_mitigation {
|
|
B43_INTERFMODE_NONE,
|
|
B43_INTERFMODE_NONWLAN,
|
|
B43_INTERFMODE_MANUALWLAN,
|
|
B43_INTERFMODE_AUTOWLAN,
|
|
};
|
|
|
|
/* Antenna identifiers */
|
|
enum {
|
|
B43_ANTENNA0 = 0, /* Antenna 0 */
|
|
B43_ANTENNA1 = 1, /* Antenna 1 */
|
|
B43_ANTENNA_AUTO0 = 2, /* Automatic, starting with antenna 0 */
|
|
B43_ANTENNA_AUTO1 = 3, /* Automatic, starting with antenna 1 */
|
|
B43_ANTENNA2 = 4,
|
|
B43_ANTENNA3 = 8,
|
|
|
|
B43_ANTENNA_AUTO = B43_ANTENNA_AUTO0,
|
|
B43_ANTENNA_DEFAULT = B43_ANTENNA_AUTO,
|
|
};
|
|
|
|
/**
|
|
* enum b43_txpwr_result - Return value for the recalc_txpower PHY op.
|
|
*
|
|
* @B43_TXPWR_RES_NEED_ADJUST: Values changed. Hardware adjustment is needed.
|
|
* @B43_TXPWR_RES_DONE: No more work to do. Everything is done.
|
|
*/
|
|
enum b43_txpwr_result {
|
|
B43_TXPWR_RES_NEED_ADJUST,
|
|
B43_TXPWR_RES_DONE,
|
|
};
|
|
|
|
/**
|
|
* struct b43_phy_operations - Function pointers for PHY ops.
|
|
*
|
|
* @allocate: Allocate and initialise the PHY data structures.
|
|
* Must not be NULL.
|
|
* @free: Destroy and free the PHY data structures.
|
|
* Must not be NULL.
|
|
*
|
|
* @prepare_structs: Prepare the PHY data structures.
|
|
* The data structures allocated in @allocate are
|
|
* initialized here.
|
|
* Must not be NULL.
|
|
* @prepare_hardware: Prepare the PHY. This is called before b43_chip_init to
|
|
* do some early early PHY hardware init.
|
|
* Can be NULL, if not required.
|
|
* @init: Initialize the PHY.
|
|
* Must not be NULL.
|
|
* @exit: Shutdown the PHY.
|
|
* Can be NULL, if not required.
|
|
*
|
|
* @phy_read: Read from a PHY register.
|
|
* Must not be NULL.
|
|
* @phy_write: Write to a PHY register.
|
|
* Must not be NULL.
|
|
* @phy_maskset: Maskset a PHY register, taking shortcuts.
|
|
* If it is NULL, a generic algorithm is used.
|
|
* @radio_read: Read from a Radio register.
|
|
* Must not be NULL.
|
|
* @radio_write: Write to a Radio register.
|
|
* Must not be NULL.
|
|
*
|
|
* @supports_hwpctl: Returns a boolean whether Hardware Power Control
|
|
* is supported or not.
|
|
* If NULL, hwpctl is assumed to be never supported.
|
|
* @software_rfkill: Turn the radio ON or OFF.
|
|
* Possible state values are
|
|
* RFKILL_STATE_SOFT_BLOCKED or
|
|
* RFKILL_STATE_UNBLOCKED
|
|
* Must not be NULL.
|
|
* @switch_analog: Turn the Analog on/off.
|
|
* Must not be NULL.
|
|
* @switch_channel: Switch the radio to another channel.
|
|
* Must not be NULL.
|
|
* @get_default_chan: Just returns the default channel number.
|
|
* Must not be NULL.
|
|
* @set_rx_antenna: Set the antenna used for RX.
|
|
* Can be NULL, if not supported.
|
|
* @interf_mitigation: Switch the Interference Mitigation mode.
|
|
* Can be NULL, if not supported.
|
|
*
|
|
* @recalc_txpower: Recalculate the transmission power parameters.
|
|
* This callback has to recalculate the TX power settings,
|
|
* but does not need to write them to the hardware, yet.
|
|
* Returns enum b43_txpwr_result to indicate whether the hardware
|
|
* needs to be adjusted.
|
|
* If B43_TXPWR_NEED_ADJUST is returned, @adjust_txpower
|
|
* will be called later.
|
|
* If the parameter "ignore_tssi" is true, the TSSI values should
|
|
* be ignored and a recalculation of the power settings should be
|
|
* done even if the TSSI values did not change.
|
|
* This function may sleep, but should not.
|
|
* Must not be NULL.
|
|
* @adjust_txpower: Write the previously calculated TX power settings
|
|
* (from @recalc_txpower) to the hardware.
|
|
* This function may sleep.
|
|
* Can be NULL, if (and ONLY if) @recalc_txpower _always_
|
|
* returns B43_TXPWR_RES_DONE.
|
|
*
|
|
* @pwork_15sec: Periodic work. Called every 15 seconds.
|
|
* Can be NULL, if not required.
|
|
* @pwork_60sec: Periodic work. Called every 60 seconds.
|
|
* Can be NULL, if not required.
|
|
*/
|
|
struct b43_phy_operations {
|
|
/* Initialisation */
|
|
int (*allocate)(struct b43_wldev *dev);
|
|
void (*free)(struct b43_wldev *dev);
|
|
void (*prepare_structs)(struct b43_wldev *dev);
|
|
int (*prepare_hardware)(struct b43_wldev *dev);
|
|
int (*init)(struct b43_wldev *dev);
|
|
void (*exit)(struct b43_wldev *dev);
|
|
|
|
/* Register access */
|
|
u16 (*phy_read)(struct b43_wldev *dev, u16 reg);
|
|
void (*phy_write)(struct b43_wldev *dev, u16 reg, u16 value);
|
|
void (*phy_maskset)(struct b43_wldev *dev, u16 reg, u16 mask, u16 set);
|
|
u16 (*radio_read)(struct b43_wldev *dev, u16 reg);
|
|
void (*radio_write)(struct b43_wldev *dev, u16 reg, u16 value);
|
|
|
|
/* Radio */
|
|
bool (*supports_hwpctl)(struct b43_wldev *dev);
|
|
void (*software_rfkill)(struct b43_wldev *dev, bool blocked);
|
|
void (*switch_analog)(struct b43_wldev *dev, bool on);
|
|
int (*switch_channel)(struct b43_wldev *dev, unsigned int new_channel);
|
|
unsigned int (*get_default_chan)(struct b43_wldev *dev);
|
|
void (*set_rx_antenna)(struct b43_wldev *dev, int antenna);
|
|
int (*interf_mitigation)(struct b43_wldev *dev,
|
|
enum b43_interference_mitigation new_mode);
|
|
|
|
/* Transmission power adjustment */
|
|
enum b43_txpwr_result (*recalc_txpower)(struct b43_wldev *dev,
|
|
bool ignore_tssi);
|
|
void (*adjust_txpower)(struct b43_wldev *dev);
|
|
|
|
/* Misc */
|
|
void (*pwork_15sec)(struct b43_wldev *dev);
|
|
void (*pwork_60sec)(struct b43_wldev *dev);
|
|
};
|
|
|
|
struct b43_phy_a;
|
|
struct b43_phy_g;
|
|
struct b43_phy_n;
|
|
struct b43_phy_lp;
|
|
struct b43_phy_ht;
|
|
struct b43_phy_lcn;
|
|
|
|
struct b43_phy {
|
|
/* Hardware operation callbacks. */
|
|
const struct b43_phy_operations *ops;
|
|
|
|
/* Most hardware context information is stored in the standard-
|
|
* specific data structures pointed to by the pointers below.
|
|
* Only one of them is valid (the currently enabled PHY). */
|
|
#ifdef CONFIG_B43_DEBUG
|
|
/* No union for debug build to force NULL derefs in buggy code. */
|
|
struct {
|
|
#else
|
|
union {
|
|
#endif
|
|
/* A-PHY specific information */
|
|
struct b43_phy_a *a;
|
|
/* G-PHY specific information */
|
|
struct b43_phy_g *g;
|
|
/* N-PHY specific information */
|
|
struct b43_phy_n *n;
|
|
/* LP-PHY specific information */
|
|
struct b43_phy_lp *lp;
|
|
/* HT-PHY specific information */
|
|
struct b43_phy_ht *ht;
|
|
/* LCN-PHY specific information */
|
|
struct b43_phy_lcn *lcn;
|
|
};
|
|
|
|
/* Band support flags. */
|
|
bool supports_2ghz;
|
|
bool supports_5ghz;
|
|
|
|
/* HT info */
|
|
bool is_40mhz;
|
|
|
|
/* GMODE bit enabled? */
|
|
bool gmode;
|
|
|
|
/* Analog Type */
|
|
u8 analog;
|
|
/* B43_PHYTYPE_ */
|
|
u8 type;
|
|
/* PHY revision number. */
|
|
u8 rev;
|
|
|
|
/* Count writes since last read */
|
|
u8 writes_counter;
|
|
|
|
/* Radio versioning */
|
|
u16 radio_manuf; /* Radio manufacturer */
|
|
u16 radio_ver; /* Radio version */
|
|
u8 radio_rev; /* Radio revision */
|
|
|
|
/* Software state of the radio */
|
|
bool radio_on;
|
|
|
|
/* Desired TX power level (in dBm).
|
|
* This is set by the user and adjusted in b43_phy_xmitpower(). */
|
|
int desired_txpower;
|
|
|
|
/* Hardware Power Control enabled? */
|
|
bool hardware_power_control;
|
|
|
|
/* The time (in absolute jiffies) when the next TX power output
|
|
* check is needed. */
|
|
unsigned long next_txpwr_check_time;
|
|
|
|
/* Current channel */
|
|
unsigned int channel;
|
|
u16 channel_freq;
|
|
enum nl80211_channel_type channel_type;
|
|
|
|
/* PHY TX errors counter. */
|
|
atomic_t txerr_cnt;
|
|
|
|
#ifdef CONFIG_B43_DEBUG
|
|
/* PHY registers locked (w.r.t. firmware) */
|
|
bool phy_locked;
|
|
/* Radio registers locked (w.r.t. firmware) */
|
|
bool radio_locked;
|
|
#endif /* B43_DEBUG */
|
|
};
|
|
|
|
|
|
/**
|
|
* b43_phy_allocate - Allocate PHY structs
|
|
* Allocate the PHY data structures, based on the current dev->phy.type
|
|
*/
|
|
int b43_phy_allocate(struct b43_wldev *dev);
|
|
|
|
/**
|
|
* b43_phy_free - Free PHY structs
|
|
*/
|
|
void b43_phy_free(struct b43_wldev *dev);
|
|
|
|
/**
|
|
* b43_phy_init - Initialise the PHY
|
|
*/
|
|
int b43_phy_init(struct b43_wldev *dev);
|
|
|
|
/**
|
|
* b43_phy_exit - Cleanup PHY
|
|
*/
|
|
void b43_phy_exit(struct b43_wldev *dev);
|
|
|
|
/**
|
|
* b43_has_hardware_pctl - Hardware Power Control supported?
|
|
* Returns a boolean, whether hardware power control is supported.
|
|
*/
|
|
bool b43_has_hardware_pctl(struct b43_wldev *dev);
|
|
|
|
/**
|
|
* b43_phy_read - 16bit PHY register read access
|
|
*/
|
|
u16 b43_phy_read(struct b43_wldev *dev, u16 reg);
|
|
|
|
/**
|
|
* b43_phy_write - 16bit PHY register write access
|
|
*/
|
|
void b43_phy_write(struct b43_wldev *dev, u16 reg, u16 value);
|
|
|
|
/**
|
|
* b43_phy_copy - copy contents of 16bit PHY register to another
|
|
*/
|
|
void b43_phy_copy(struct b43_wldev *dev, u16 destreg, u16 srcreg);
|
|
|
|
/**
|
|
* b43_phy_mask - Mask a PHY register with a mask
|
|
*/
|
|
void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask);
|
|
|
|
/**
|
|
* b43_phy_set - OR a PHY register with a bitmap
|
|
*/
|
|
void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set);
|
|
|
|
/**
|
|
* b43_phy_maskset - Mask and OR a PHY register with a mask and bitmap
|
|
*/
|
|
void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set);
|
|
|
|
/**
|
|
* b43_radio_read - 16bit Radio register read access
|
|
*/
|
|
u16 b43_radio_read(struct b43_wldev *dev, u16 reg);
|
|
#define b43_radio_read16 b43_radio_read /* DEPRECATED */
|
|
|
|
/**
|
|
* b43_radio_write - 16bit Radio register write access
|
|
*/
|
|
void b43_radio_write(struct b43_wldev *dev, u16 reg, u16 value);
|
|
#define b43_radio_write16 b43_radio_write /* DEPRECATED */
|
|
|
|
/**
|
|
* b43_radio_mask - Mask a 16bit radio register with a mask
|
|
*/
|
|
void b43_radio_mask(struct b43_wldev *dev, u16 offset, u16 mask);
|
|
|
|
/**
|
|
* b43_radio_set - OR a 16bit radio register with a bitmap
|
|
*/
|
|
void b43_radio_set(struct b43_wldev *dev, u16 offset, u16 set);
|
|
|
|
/**
|
|
* b43_radio_maskset - Mask and OR a radio register with a mask and bitmap
|
|
*/
|
|
void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set);
|
|
|
|
/**
|
|
* b43_radio_lock - Lock firmware radio register access
|
|
*/
|
|
void b43_radio_lock(struct b43_wldev *dev);
|
|
|
|
/**
|
|
* b43_radio_unlock - Unlock firmware radio register access
|
|
*/
|
|
void b43_radio_unlock(struct b43_wldev *dev);
|
|
|
|
/**
|
|
* b43_phy_lock - Lock firmware PHY register access
|
|
*/
|
|
void b43_phy_lock(struct b43_wldev *dev);
|
|
|
|
/**
|
|
* b43_phy_unlock - Unlock firmware PHY register access
|
|
*/
|
|
void b43_phy_unlock(struct b43_wldev *dev);
|
|
|
|
/**
|
|
* b43_switch_channel - Switch to another channel
|
|
*/
|
|
int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel);
|
|
/**
|
|
* B43_DEFAULT_CHANNEL - Switch to the default channel.
|
|
*/
|
|
#define B43_DEFAULT_CHANNEL UINT_MAX
|
|
|
|
/**
|
|
* b43_software_rfkill - Turn the radio ON or OFF in software.
|
|
*/
|
|
void b43_software_rfkill(struct b43_wldev *dev, bool blocked);
|
|
|
|
/**
|
|
* b43_phy_txpower_check - Check TX power output.
|
|
*
|
|
* Compare the current TX power output to the desired power emission
|
|
* and schedule an adjustment in case it mismatches.
|
|
*
|
|
* @flags: OR'ed enum b43_phy_txpower_check_flags flags.
|
|
* See the docs below.
|
|
*/
|
|
void b43_phy_txpower_check(struct b43_wldev *dev, unsigned int flags);
|
|
/**
|
|
* enum b43_phy_txpower_check_flags - Flags for b43_phy_txpower_check()
|
|
*
|
|
* @B43_TXPWR_IGNORE_TIME: Ignore the schedule time and force-redo
|
|
* the check now.
|
|
* @B43_TXPWR_IGNORE_TSSI: Redo the recalculation, even if the average
|
|
* TSSI did not change.
|
|
*/
|
|
enum b43_phy_txpower_check_flags {
|
|
B43_TXPWR_IGNORE_TIME = (1 << 0),
|
|
B43_TXPWR_IGNORE_TSSI = (1 << 1),
|
|
};
|
|
|
|
struct work_struct;
|
|
void b43_phy_txpower_adjust_work(struct work_struct *work);
|
|
|
|
/**
|
|
* b43_phy_shm_tssi_read - Read the average of the last 4 TSSI from SHM.
|
|
*
|
|
* @shm_offset: The SHM address to read the values from.
|
|
*
|
|
* Returns the average of the 4 TSSI values, or a negative error code.
|
|
*/
|
|
int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset);
|
|
|
|
/**
|
|
* b43_phy_switch_analog_generic - Generic PHY operation for switching the Analog.
|
|
*
|
|
* It does the switching based on the PHY0 core register.
|
|
* Do _not_ call this directly. Only use it as a switch_analog callback
|
|
* for struct b43_phy_operations.
|
|
*/
|
|
void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on);
|
|
|
|
bool b43_channel_type_is_40mhz(enum nl80211_channel_type channel_type);
|
|
|
|
struct b43_c32 b43_cordic(int theta);
|
|
|
|
#endif /* LINUX_B43_PHY_COMMON_H_ */
|