OpenCloudOS-Kernel/drivers/clk/ingenic/jz4760-cgu.c

439 lines
11 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* JZ4760 SoC CGU driver
* Copyright 2018, Paul Cercueil <paul@crapouillou.net>
*/
#include <linux/bitops.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/clk.h>
#include <dt-bindings/clock/ingenic,jz4760-cgu.h>
#include "cgu.h"
#include "pm.h"
#define MHZ (1000 * 1000)
/*
* CPM registers offset address definition
*/
#define CGU_REG_CPCCR 0x00
#define CGU_REG_LCR 0x04
#define CGU_REG_CPPCR0 0x10
#define CGU_REG_CLKGR0 0x20
#define CGU_REG_OPCR 0x24
#define CGU_REG_CLKGR1 0x28
#define CGU_REG_CPPCR1 0x30
#define CGU_REG_USBPCR 0x3c
#define CGU_REG_USBCDR 0x50
#define CGU_REG_I2SCDR 0x60
#define CGU_REG_LPCDR 0x64
#define CGU_REG_MSCCDR 0x68
#define CGU_REG_UHCCDR 0x6c
#define CGU_REG_SSICDR 0x74
#define CGU_REG_CIMCDR 0x7c
#define CGU_REG_GPSCDR 0x80
#define CGU_REG_PCMCDR 0x84
#define CGU_REG_GPUCDR 0x88
static const s8 pll_od_encoding[8] = {
0x0, 0x1, -1, 0x2, -1, -1, -1, 0x3,
};
static const u8 jz4760_cgu_cpccr_div_table[] = {
1, 2, 3, 4, 6, 8,
};
static const u8 jz4760_cgu_pll_half_div_table[] = {
2, 1,
};
static void
jz4760_cgu_calc_m_n_od(const struct ingenic_cgu_pll_info *pll_info,
unsigned long rate, unsigned long parent_rate,
unsigned int *pm, unsigned int *pn, unsigned int *pod)
{
unsigned int m, n, od, m_max = (1 << pll_info->m_bits) - 2;
/* The frequency after the N divider must be between 1 and 50 MHz. */
n = parent_rate / (1 * MHZ);
/* The N divider must be >= 2. */
n = clamp_val(n, 2, 1 << pll_info->n_bits);
for (;; n >>= 1) {
od = (unsigned int)-1;
do {
m = (rate / MHZ) * (1 << ++od) * n / (parent_rate / MHZ);
} while ((m > m_max || m & 1) && (od < 4));
if (od < 4 && m >= 4 && m <= m_max)
break;
}
*pm = m;
*pn = n;
*pod = 1 << od;
}
static const struct ingenic_cgu_clk_info jz4760_cgu_clocks[] = {
/* External clocks */
[JZ4760_CLK_EXT] = { "ext", CGU_CLK_EXT },
[JZ4760_CLK_OSC32K] = { "osc32k", CGU_CLK_EXT },
/* PLLs */
[JZ4760_CLK_PLL0] = {
"pll0", CGU_CLK_PLL,
.parents = { JZ4760_CLK_EXT },
.pll = {
.reg = CGU_REG_CPPCR0,
.rate_multiplier = 1,
.m_shift = 23,
.m_bits = 8,
.m_offset = 0,
.n_shift = 18,
.n_bits = 4,
.n_offset = 0,
.od_shift = 16,
.od_bits = 2,
.od_max = 8,
.od_encoding = pll_od_encoding,
.bypass_reg = CGU_REG_CPPCR0,
.bypass_bit = 9,
.enable_bit = 8,
.stable_bit = 10,
.calc_m_n_od = jz4760_cgu_calc_m_n_od,
},
},
[JZ4760_CLK_PLL1] = {
/* TODO: PLL1 can depend on PLL0 */
"pll1", CGU_CLK_PLL,
.parents = { JZ4760_CLK_EXT },
.pll = {
.reg = CGU_REG_CPPCR1,
.rate_multiplier = 1,
.m_shift = 23,
.m_bits = 8,
.m_offset = 0,
.n_shift = 18,
.n_bits = 4,
.n_offset = 0,
.od_shift = 16,
.od_bits = 2,
.od_max = 8,
.od_encoding = pll_od_encoding,
.bypass_bit = -1,
.enable_bit = 7,
.stable_bit = 6,
.calc_m_n_od = jz4760_cgu_calc_m_n_od,
},
},
/* Main clocks */
[JZ4760_CLK_CCLK] = {
"cclk", CGU_CLK_DIV,
.parents = { JZ4760_CLK_PLL0, },
.div = {
CGU_REG_CPCCR, 0, 1, 4, 22, -1, -1, 0,
jz4760_cgu_cpccr_div_table,
},
},
[JZ4760_CLK_HCLK] = {
"hclk", CGU_CLK_DIV,
.parents = { JZ4760_CLK_PLL0, },
.div = {
CGU_REG_CPCCR, 4, 1, 4, 22, -1, -1, 0,
jz4760_cgu_cpccr_div_table,
},
},
[JZ4760_CLK_SCLK] = {
"sclk", CGU_CLK_DIV,
.parents = { JZ4760_CLK_PLL0, },
.div = {
CGU_REG_CPCCR, 24, 1, 4, 22, -1, -1, 0,
jz4760_cgu_cpccr_div_table,
},
},
[JZ4760_CLK_H2CLK] = {
"h2clk", CGU_CLK_DIV,
.parents = { JZ4760_CLK_PLL0, },
.div = {
CGU_REG_CPCCR, 16, 1, 4, 22, -1, -1, 0,
jz4760_cgu_cpccr_div_table,
},
},
[JZ4760_CLK_MCLK] = {
"mclk", CGU_CLK_DIV,
.parents = { JZ4760_CLK_PLL0, },
.div = {
CGU_REG_CPCCR, 12, 1, 4, 22, -1, -1, 0,
jz4760_cgu_cpccr_div_table,
},
},
[JZ4760_CLK_PCLK] = {
"pclk", CGU_CLK_DIV,
.parents = { JZ4760_CLK_PLL0, },
.div = {
CGU_REG_CPCCR, 8, 1, 4, 22, -1, -1, 0,
jz4760_cgu_cpccr_div_table,
},
},
/* Divided clocks */
[JZ4760_CLK_PLL0_HALF] = {
"pll0_half", CGU_CLK_DIV,
.parents = { JZ4760_CLK_PLL0 },
.div = {
CGU_REG_CPCCR, 21, 1, 1, 22, -1, -1, 0,
jz4760_cgu_pll_half_div_table,
},
},
/* Those divided clocks can connect to PLL0 or PLL1 */
[JZ4760_CLK_UHC] = {
"uhc", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
.parents = { JZ4760_CLK_PLL0_HALF, JZ4760_CLK_PLL1, },
.mux = { CGU_REG_UHCCDR, 31, 1 },
.div = { CGU_REG_UHCCDR, 0, 1, 4, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 24 },
},
[JZ4760_CLK_GPU] = {
"gpu", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
.parents = { JZ4760_CLK_PLL0_HALF, JZ4760_CLK_PLL1, },
.mux = { CGU_REG_GPUCDR, 31, 1 },
.div = { CGU_REG_GPUCDR, 0, 1, 3, -1, -1, -1 },
.gate = { CGU_REG_CLKGR1, 9 },
},
[JZ4760_CLK_LPCLK_DIV] = {
"lpclk_div", CGU_CLK_DIV | CGU_CLK_MUX,
.parents = { JZ4760_CLK_PLL0_HALF, JZ4760_CLK_PLL1, },
.mux = { CGU_REG_LPCDR, 29, 1 },
.div = { CGU_REG_LPCDR, 0, 1, 11, -1, -1, -1 },
},
[JZ4760_CLK_TVE] = {
"tve", CGU_CLK_GATE | CGU_CLK_MUX,
.parents = { JZ4760_CLK_LPCLK_DIV, JZ4760_CLK_EXT, },
.mux = { CGU_REG_LPCDR, 31, 1 },
.gate = { CGU_REG_CLKGR0, 27 },
},
[JZ4760_CLK_LPCLK] = {
"lpclk", CGU_CLK_GATE | CGU_CLK_MUX,
.parents = { JZ4760_CLK_LPCLK_DIV, JZ4760_CLK_TVE, },
.mux = { CGU_REG_LPCDR, 30, 1 },
.gate = { CGU_REG_CLKGR0, 28 },
},
[JZ4760_CLK_GPS] = {
"gps", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
.parents = { JZ4760_CLK_PLL0_HALF, JZ4760_CLK_PLL1, },
.mux = { CGU_REG_GPSCDR, 31, 1 },
.div = { CGU_REG_GPSCDR, 0, 1, 4, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 22 },
},
/* Those divided clocks can connect to EXT, PLL0 or PLL1 */
[JZ4760_CLK_PCM] = {
"pcm", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
.parents = { JZ4760_CLK_EXT, -1,
JZ4760_CLK_PLL0_HALF, JZ4760_CLK_PLL1 },
.mux = { CGU_REG_PCMCDR, 30, 2 },
.div = { CGU_REG_PCMCDR, 0, 1, 9, -1, -1, -1, BIT(0) },
.gate = { CGU_REG_CLKGR1, 8 },
},
[JZ4760_CLK_I2S] = {
"i2s", CGU_CLK_DIV | CGU_CLK_MUX,
.parents = { JZ4760_CLK_EXT, -1,
JZ4760_CLK_PLL0_HALF, JZ4760_CLK_PLL1 },
.mux = { CGU_REG_I2SCDR, 30, 2 },
.div = { CGU_REG_I2SCDR, 0, 1, 9, -1, -1, -1, BIT(0) },
},
[JZ4760_CLK_OTG] = {
"usb", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
.parents = { JZ4760_CLK_EXT, -1,
JZ4760_CLK_PLL0_HALF, JZ4760_CLK_PLL1 },
.mux = { CGU_REG_USBCDR, 30, 2 },
.div = { CGU_REG_USBCDR, 0, 1, 8, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 2 },
},
/* Those divided clocks can connect to EXT or PLL0 */
[JZ4760_CLK_MMC_MUX] = {
"mmc_mux", CGU_CLK_MUX | CGU_CLK_DIV,
.parents = { JZ4760_CLK_EXT, JZ4760_CLK_PLL0_HALF, },
.mux = { CGU_REG_MSCCDR, 31, 1 },
.div = { CGU_REG_MSCCDR, 0, 1, 6, -1, -1, -1, BIT(0) },
},
[JZ4760_CLK_SSI_MUX] = {
"ssi_mux", CGU_CLK_DIV | CGU_CLK_MUX,
.parents = { JZ4760_CLK_EXT, JZ4760_CLK_PLL0_HALF, },
.mux = { CGU_REG_SSICDR, 31, 1 },
.div = { CGU_REG_SSICDR, 0, 1, 6, -1, -1, -1, BIT(0) },
},
/* These divided clock can connect to PLL0 only */
[JZ4760_CLK_CIM] = {
"cim", CGU_CLK_DIV | CGU_CLK_GATE,
.parents = { JZ4760_CLK_PLL0_HALF },
.div = { CGU_REG_CIMCDR, 0, 1, 8, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 26 },
},
/* Gate-only clocks */
[JZ4760_CLK_SSI0] = {
"ssi0", CGU_CLK_GATE,
.parents = { JZ4760_CLK_SSI_MUX, },
.gate = { CGU_REG_CLKGR0, 4 },
},
[JZ4760_CLK_SSI1] = {
"ssi1", CGU_CLK_GATE,
.parents = { JZ4760_CLK_SSI_MUX, },
.gate = { CGU_REG_CLKGR0, 19 },
},
[JZ4760_CLK_SSI2] = {
"ssi2", CGU_CLK_GATE,
.parents = { JZ4760_CLK_SSI_MUX, },
.gate = { CGU_REG_CLKGR0, 20 },
},
[JZ4760_CLK_DMA] = {
"dma", CGU_CLK_GATE,
.parents = { JZ4760_CLK_H2CLK, },
.gate = { CGU_REG_CLKGR0, 21 },
},
[JZ4760_CLK_MDMA] = {
"mdma", CGU_CLK_GATE,
.parents = { JZ4760_CLK_HCLK, },
.gate = { CGU_REG_CLKGR0, 25 },
},
[JZ4760_CLK_BDMA] = {
"bdma", CGU_CLK_GATE,
.parents = { JZ4760_CLK_HCLK, },
.gate = { CGU_REG_CLKGR1, 0 },
},
[JZ4760_CLK_I2C0] = {
"i2c0", CGU_CLK_GATE,
.parents = { JZ4760_CLK_EXT, },
.gate = { CGU_REG_CLKGR0, 5 },
},
[JZ4760_CLK_I2C1] = {
"i2c1", CGU_CLK_GATE,
.parents = { JZ4760_CLK_EXT, },
.gate = { CGU_REG_CLKGR0, 6 },
},
[JZ4760_CLK_UART0] = {
"uart0", CGU_CLK_GATE,
.parents = { JZ4760_CLK_EXT, },
.gate = { CGU_REG_CLKGR0, 15 },
},
[JZ4760_CLK_UART1] = {
"uart1", CGU_CLK_GATE,
.parents = { JZ4760_CLK_EXT, },
.gate = { CGU_REG_CLKGR0, 16 },
},
[JZ4760_CLK_UART2] = {
"uart2", CGU_CLK_GATE,
.parents = { JZ4760_CLK_EXT, },
.gate = { CGU_REG_CLKGR0, 17 },
},
[JZ4760_CLK_UART3] = {
"uart3", CGU_CLK_GATE,
.parents = { JZ4760_CLK_EXT, },
.gate = { CGU_REG_CLKGR0, 18 },
},
[JZ4760_CLK_IPU] = {
"ipu", CGU_CLK_GATE,
.parents = { JZ4760_CLK_HCLK, },
.gate = { CGU_REG_CLKGR0, 29 },
},
[JZ4760_CLK_ADC] = {
"adc", CGU_CLK_GATE,
.parents = { JZ4760_CLK_EXT, },
.gate = { CGU_REG_CLKGR0, 14 },
},
[JZ4760_CLK_AIC] = {
"aic", CGU_CLK_GATE,
.parents = { JZ4760_CLK_EXT, },
.gate = { CGU_REG_CLKGR0, 8 },
},
[JZ4760_CLK_VPU] = {
"vpu", CGU_CLK_GATE,
.parents = { JZ4760_CLK_HCLK, },
.gate = { CGU_REG_LCR, 30, false, 150 },
},
[JZ4760_CLK_MMC0] = {
"mmc0", CGU_CLK_GATE,
.parents = { JZ4760_CLK_MMC_MUX, },
.gate = { CGU_REG_CLKGR0, 3 },
},
[JZ4760_CLK_MMC1] = {
"mmc1", CGU_CLK_GATE,
.parents = { JZ4760_CLK_MMC_MUX, },
.gate = { CGU_REG_CLKGR0, 11 },
},
[JZ4760_CLK_MMC2] = {
"mmc2", CGU_CLK_GATE,
.parents = { JZ4760_CLK_MMC_MUX, },
.gate = { CGU_REG_CLKGR0, 12 },
},
[JZ4760_CLK_UHC_PHY] = {
"uhc_phy", CGU_CLK_GATE,
.parents = { JZ4760_CLK_UHC, },
.gate = { CGU_REG_OPCR, 5 },
},
[JZ4760_CLK_OTG_PHY] = {
"usb_phy", CGU_CLK_GATE,
.parents = { JZ4760_CLK_OTG },
.gate = { CGU_REG_OPCR, 7, true, 50 },
},
/* Custom clocks */
[JZ4760_CLK_EXT512] = {
"ext/512", CGU_CLK_FIXDIV,
.parents = { JZ4760_CLK_EXT },
.fixdiv = { 512 },
},
[JZ4760_CLK_RTC] = {
"rtc", CGU_CLK_MUX,
.parents = { JZ4760_CLK_EXT512, JZ4760_CLK_OSC32K, },
.mux = { CGU_REG_OPCR, 2, 1},
},
};
static void __init jz4760_cgu_init(struct device_node *np)
{
struct ingenic_cgu *cgu;
int retval;
cgu = ingenic_cgu_new(jz4760_cgu_clocks,
ARRAY_SIZE(jz4760_cgu_clocks), np);
if (!cgu) {
pr_err("%s: failed to initialise CGU\n", __func__);
return;
}
retval = ingenic_cgu_register_clocks(cgu);
if (retval)
pr_err("%s: failed to register CGU Clocks\n", __func__);
ingenic_cgu_register_syscore_ops(cgu);
}
/* We only probe via devicetree, no need for a platform driver */
CLK_OF_DECLARE_DRIVER(jz4760_cgu, "ingenic,jz4760-cgu", jz4760_cgu_init);
/* JZ4760B has some small differences, but we don't implement them. */
CLK_OF_DECLARE_DRIVER(jz4760b_cgu, "ingenic,jz4760b-cgu", jz4760_cgu_init);