986 lines
26 KiB
C
986 lines
26 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Intel Lynxpoint PCH pinctrl/GPIO driver
|
|
*
|
|
* Copyright (c) 2012, 2019, Intel Corporation
|
|
* Authors: Mathias Nyman <mathias.nyman@linux.intel.com>
|
|
* Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
*/
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/pinctrl/pinctrl.h>
|
|
#include <linux/pinctrl/pinmux.h>
|
|
#include <linux/pinctrl/pinconf.h>
|
|
#include <linux/pinctrl/pinconf-generic.h>
|
|
|
|
#include "pinctrl-intel.h"
|
|
|
|
#define COMMUNITY(p, n) \
|
|
{ \
|
|
.pin_base = (p), \
|
|
.npins = (n), \
|
|
}
|
|
|
|
static const struct pinctrl_pin_desc lptlp_pins[] = {
|
|
PINCTRL_PIN(0, "GP0_UART1_RXD"),
|
|
PINCTRL_PIN(1, "GP1_UART1_TXD"),
|
|
PINCTRL_PIN(2, "GP2_UART1_RTSB"),
|
|
PINCTRL_PIN(3, "GP3_UART1_CTSB"),
|
|
PINCTRL_PIN(4, "GP4_I2C0_SDA"),
|
|
PINCTRL_PIN(5, "GP5_I2C0_SCL"),
|
|
PINCTRL_PIN(6, "GP6_I2C1_SDA"),
|
|
PINCTRL_PIN(7, "GP7_I2C1_SCL"),
|
|
PINCTRL_PIN(8, "GP8"),
|
|
PINCTRL_PIN(9, "GP9"),
|
|
PINCTRL_PIN(10, "GP10"),
|
|
PINCTRL_PIN(11, "GP11_SMBALERTB"),
|
|
PINCTRL_PIN(12, "GP12_LANPHYPC"),
|
|
PINCTRL_PIN(13, "GP13"),
|
|
PINCTRL_PIN(14, "GP14"),
|
|
PINCTRL_PIN(15, "GP15"),
|
|
PINCTRL_PIN(16, "GP16_MGPIO9"),
|
|
PINCTRL_PIN(17, "GP17_MGPIO10"),
|
|
PINCTRL_PIN(18, "GP18_SRC0CLKRQB"),
|
|
PINCTRL_PIN(19, "GP19_SRC1CLKRQB"),
|
|
PINCTRL_PIN(20, "GP20_SRC2CLKRQB"),
|
|
PINCTRL_PIN(21, "GP21_SRC3CLKRQB"),
|
|
PINCTRL_PIN(22, "GP22_SRC4CLKRQB_TRST2"),
|
|
PINCTRL_PIN(23, "GP23_SRC5CLKRQB_TDI2"),
|
|
PINCTRL_PIN(24, "GP24_MGPIO0"),
|
|
PINCTRL_PIN(25, "GP25_USBWAKEOUTB"),
|
|
PINCTRL_PIN(26, "GP26_MGPIO5"),
|
|
PINCTRL_PIN(27, "GP27_MGPIO6"),
|
|
PINCTRL_PIN(28, "GP28_MGPIO7"),
|
|
PINCTRL_PIN(29, "GP29_SLP_WLANB_MGPIO3"),
|
|
PINCTRL_PIN(30, "GP30_SUSWARNB_SUSPWRDNACK_MGPIO1"),
|
|
PINCTRL_PIN(31, "GP31_ACPRESENT_MGPIO2"),
|
|
PINCTRL_PIN(32, "GP32_CLKRUNB"),
|
|
PINCTRL_PIN(33, "GP33_DEVSLP0"),
|
|
PINCTRL_PIN(34, "GP34_SATA0XPCIE6L3B_SATA0GP"),
|
|
PINCTRL_PIN(35, "GP35_SATA1XPCIE6L2B_SATA1GP"),
|
|
PINCTRL_PIN(36, "GP36_SATA2XPCIE6L1B_SATA2GP"),
|
|
PINCTRL_PIN(37, "GP37_SATA3XPCIE6L0B_SATA3GP"),
|
|
PINCTRL_PIN(38, "GP38_DEVSLP1"),
|
|
PINCTRL_PIN(39, "GP39_DEVSLP2"),
|
|
PINCTRL_PIN(40, "GP40_OC0B"),
|
|
PINCTRL_PIN(41, "GP41_OC1B"),
|
|
PINCTRL_PIN(42, "GP42_OC2B"),
|
|
PINCTRL_PIN(43, "GP43_OC3B"),
|
|
PINCTRL_PIN(44, "GP44"),
|
|
PINCTRL_PIN(45, "GP45_TMS2"),
|
|
PINCTRL_PIN(46, "GP46_TDO2"),
|
|
PINCTRL_PIN(47, "GP47"),
|
|
PINCTRL_PIN(48, "GP48"),
|
|
PINCTRL_PIN(49, "GP49"),
|
|
PINCTRL_PIN(50, "GP50"),
|
|
PINCTRL_PIN(51, "GP51_GSXDOUT"),
|
|
PINCTRL_PIN(52, "GP52_GSXSLOAD"),
|
|
PINCTRL_PIN(53, "GP53_GSXDIN"),
|
|
PINCTRL_PIN(54, "GP54_GSXSRESETB"),
|
|
PINCTRL_PIN(55, "GP55_GSXCLK"),
|
|
PINCTRL_PIN(56, "GP56"),
|
|
PINCTRL_PIN(57, "GP57"),
|
|
PINCTRL_PIN(58, "GP58"),
|
|
PINCTRL_PIN(59, "GP59"),
|
|
PINCTRL_PIN(60, "GP60_SML0ALERTB_MGPIO4"),
|
|
PINCTRL_PIN(61, "GP61_SUS_STATB"),
|
|
PINCTRL_PIN(62, "GP62_SUSCLK"),
|
|
PINCTRL_PIN(63, "GP63_SLP_S5B"),
|
|
PINCTRL_PIN(64, "GP64_SDIO_CLK"),
|
|
PINCTRL_PIN(65, "GP65_SDIO_CMD"),
|
|
PINCTRL_PIN(66, "GP66_SDIO_D0"),
|
|
PINCTRL_PIN(67, "GP67_SDIO_D1"),
|
|
PINCTRL_PIN(68, "GP68_SDIO_D2"),
|
|
PINCTRL_PIN(69, "GP69_SDIO_D3"),
|
|
PINCTRL_PIN(70, "GP70_SDIO_POWER_EN"),
|
|
PINCTRL_PIN(71, "GP71_MPHYPC"),
|
|
PINCTRL_PIN(72, "GP72_BATLOWB"),
|
|
PINCTRL_PIN(73, "GP73_SML1ALERTB_PCHHOTB_MGPIO8"),
|
|
PINCTRL_PIN(74, "GP74_SML1DATA_MGPIO12"),
|
|
PINCTRL_PIN(75, "GP75_SML1CLK_MGPIO11"),
|
|
PINCTRL_PIN(76, "GP76_BMBUSYB"),
|
|
PINCTRL_PIN(77, "GP77_PIRQAB"),
|
|
PINCTRL_PIN(78, "GP78_PIRQBB"),
|
|
PINCTRL_PIN(79, "GP79_PIRQCB"),
|
|
PINCTRL_PIN(80, "GP80_PIRQDB"),
|
|
PINCTRL_PIN(81, "GP81_SPKR"),
|
|
PINCTRL_PIN(82, "GP82_RCINB"),
|
|
PINCTRL_PIN(83, "GP83_GSPI0_CSB"),
|
|
PINCTRL_PIN(84, "GP84_GSPI0_CLK"),
|
|
PINCTRL_PIN(85, "GP85_GSPI0_MISO"),
|
|
PINCTRL_PIN(86, "GP86_GSPI0_MOSI"),
|
|
PINCTRL_PIN(87, "GP87_GSPI1_CSB"),
|
|
PINCTRL_PIN(88, "GP88_GSPI1_CLK"),
|
|
PINCTRL_PIN(89, "GP89_GSPI1_MISO"),
|
|
PINCTRL_PIN(90, "GP90_GSPI1_MOSI"),
|
|
PINCTRL_PIN(91, "GP91_UART0_RXD"),
|
|
PINCTRL_PIN(92, "GP92_UART0_TXD"),
|
|
PINCTRL_PIN(93, "GP93_UART0_RTSB"),
|
|
PINCTRL_PIN(94, "GP94_UART0_CTSB"),
|
|
};
|
|
|
|
static const struct intel_community lptlp_communities[] = {
|
|
COMMUNITY(0, 95),
|
|
};
|
|
|
|
static const struct intel_pinctrl_soc_data lptlp_soc_data = {
|
|
.pins = lptlp_pins,
|
|
.npins = ARRAY_SIZE(lptlp_pins),
|
|
.communities = lptlp_communities,
|
|
.ncommunities = ARRAY_SIZE(lptlp_communities),
|
|
};
|
|
|
|
/* LynxPoint chipset has support for 95 GPIO pins */
|
|
|
|
#define LP_NUM_GPIO 95
|
|
|
|
/* Bitmapped register offsets */
|
|
#define LP_ACPI_OWNED 0x00 /* Bitmap, set by bios, 0: pin reserved for ACPI */
|
|
#define LP_IRQ2IOXAPIC 0x10 /* Bitmap, set by bios, 1: pin routed to IOxAPIC */
|
|
#define LP_GC 0x7C /* set APIC IRQ to IRQ14 or IRQ15 for all pins */
|
|
#define LP_INT_STAT 0x80
|
|
#define LP_INT_ENABLE 0x90
|
|
|
|
/* Each pin has two 32 bit config registers, starting at 0x100 */
|
|
#define LP_CONFIG1 0x100
|
|
#define LP_CONFIG2 0x104
|
|
|
|
/* LP_CONFIG1 reg bits */
|
|
#define OUT_LVL_BIT BIT(31)
|
|
#define IN_LVL_BIT BIT(30)
|
|
#define TRIG_SEL_BIT BIT(4) /* 0: Edge, 1: Level */
|
|
#define INT_INV_BIT BIT(3) /* Invert interrupt triggering */
|
|
#define DIR_BIT BIT(2) /* 0: Output, 1: Input */
|
|
#define USE_SEL_MASK GENMASK(1, 0) /* 0: Native, 1: GPIO, ... */
|
|
#define USE_SEL_NATIVE (0 << 0)
|
|
#define USE_SEL_GPIO (1 << 0)
|
|
|
|
/* LP_CONFIG2 reg bits */
|
|
#define GPINDIS_BIT BIT(2) /* disable input sensing */
|
|
#define GPIWP_MASK GENMASK(1, 0) /* weak pull options */
|
|
#define GPIWP_NONE 0 /* none */
|
|
#define GPIWP_DOWN 1 /* weak pull down */
|
|
#define GPIWP_UP 2 /* weak pull up */
|
|
|
|
/*
|
|
* Lynxpoint gpios are controlled through both bitmapped registers and
|
|
* per gpio specific registers. The bitmapped registers are in chunks of
|
|
* 3 x 32bit registers to cover all 95 GPIOs
|
|
*
|
|
* per gpio specific registers consist of two 32bit registers per gpio
|
|
* (LP_CONFIG1 and LP_CONFIG2), with 95 GPIOs there's a total of
|
|
* 190 config registers.
|
|
*
|
|
* A simplified view of the register layout look like this:
|
|
*
|
|
* LP_ACPI_OWNED[31:0] gpio ownerships for gpios 0-31 (bitmapped registers)
|
|
* LP_ACPI_OWNED[63:32] gpio ownerships for gpios 32-63
|
|
* LP_ACPI_OWNED[94:64] gpio ownerships for gpios 63-94
|
|
* ...
|
|
* LP_INT_ENABLE[31:0] ...
|
|
* LP_INT_ENABLE[63:32] ...
|
|
* LP_INT_ENABLE[94:64] ...
|
|
* LP0_CONFIG1 (gpio 0) config1 reg for gpio 0 (per gpio registers)
|
|
* LP0_CONFIG2 (gpio 0) config2 reg for gpio 0
|
|
* LP1_CONFIG1 (gpio 1) config1 reg for gpio 1
|
|
* LP1_CONFIG2 (gpio 1) config2 reg for gpio 1
|
|
* LP2_CONFIG1 (gpio 2) ...
|
|
* LP2_CONFIG2 (gpio 2) ...
|
|
* ...
|
|
* LP94_CONFIG1 (gpio 94) ...
|
|
* LP94_CONFIG2 (gpio 94) ...
|
|
*
|
|
* IOxAPIC redirection map applies only for gpio 8-10, 13-14, 45-55.
|
|
*/
|
|
|
|
static struct intel_community *lp_get_community(struct intel_pinctrl *lg,
|
|
unsigned int pin)
|
|
{
|
|
struct intel_community *comm;
|
|
int i;
|
|
|
|
for (i = 0; i < lg->ncommunities; i++) {
|
|
comm = &lg->communities[i];
|
|
if (pin < comm->pin_base + comm->npins && pin >= comm->pin_base)
|
|
return comm;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static void __iomem *lp_gpio_reg(struct gpio_chip *chip, unsigned int offset,
|
|
int reg)
|
|
{
|
|
struct intel_pinctrl *lg = gpiochip_get_data(chip);
|
|
struct intel_community *comm;
|
|
int reg_offset;
|
|
|
|
comm = lp_get_community(lg, offset);
|
|
if (!comm)
|
|
return NULL;
|
|
|
|
offset -= comm->pin_base;
|
|
|
|
if (reg == LP_CONFIG1 || reg == LP_CONFIG2)
|
|
/* per gpio specific config registers */
|
|
reg_offset = offset * 8;
|
|
else
|
|
/* bitmapped registers */
|
|
reg_offset = (offset / 32) * 4;
|
|
|
|
return comm->regs + reg_offset + reg;
|
|
}
|
|
|
|
static bool lp_gpio_acpi_use(struct intel_pinctrl *lg, unsigned int pin)
|
|
{
|
|
void __iomem *acpi_use;
|
|
|
|
acpi_use = lp_gpio_reg(&lg->chip, pin, LP_ACPI_OWNED);
|
|
if (!acpi_use)
|
|
return true;
|
|
|
|
return !(ioread32(acpi_use) & BIT(pin % 32));
|
|
}
|
|
|
|
static bool lp_gpio_ioxapic_use(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
void __iomem *ioxapic_use = lp_gpio_reg(chip, offset, LP_IRQ2IOXAPIC);
|
|
u32 value;
|
|
|
|
value = ioread32(ioxapic_use);
|
|
|
|
if (offset >= 8 && offset <= 10)
|
|
return !!(value & BIT(offset - 8 + 0));
|
|
if (offset >= 13 && offset <= 14)
|
|
return !!(value & BIT(offset - 13 + 3));
|
|
if (offset >= 45 && offset <= 55)
|
|
return !!(value & BIT(offset - 45 + 5));
|
|
|
|
return false;
|
|
}
|
|
|
|
static int lp_get_groups_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
struct intel_pinctrl *lg = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return lg->soc->ngroups;
|
|
}
|
|
|
|
static const char *lp_get_group_name(struct pinctrl_dev *pctldev,
|
|
unsigned int selector)
|
|
{
|
|
struct intel_pinctrl *lg = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return lg->soc->groups[selector].name;
|
|
}
|
|
|
|
static int lp_get_group_pins(struct pinctrl_dev *pctldev,
|
|
unsigned int selector,
|
|
const unsigned int **pins,
|
|
unsigned int *num_pins)
|
|
{
|
|
struct intel_pinctrl *lg = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
*pins = lg->soc->groups[selector].pins;
|
|
*num_pins = lg->soc->groups[selector].npins;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void lp_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
|
|
unsigned int pin)
|
|
{
|
|
struct intel_pinctrl *lg = pinctrl_dev_get_drvdata(pctldev);
|
|
void __iomem *reg = lp_gpio_reg(&lg->chip, pin, LP_CONFIG1);
|
|
void __iomem *conf2 = lp_gpio_reg(&lg->chip, pin, LP_CONFIG2);
|
|
u32 value, mode;
|
|
|
|
value = ioread32(reg);
|
|
|
|
mode = value & USE_SEL_MASK;
|
|
if (mode == USE_SEL_GPIO)
|
|
seq_puts(s, "GPIO ");
|
|
else
|
|
seq_printf(s, "mode %d ", mode);
|
|
|
|
seq_printf(s, "0x%08x 0x%08x", value, ioread32(conf2));
|
|
|
|
if (lp_gpio_acpi_use(lg, pin))
|
|
seq_puts(s, " [ACPI]");
|
|
}
|
|
|
|
static const struct pinctrl_ops lptlp_pinctrl_ops = {
|
|
.get_groups_count = lp_get_groups_count,
|
|
.get_group_name = lp_get_group_name,
|
|
.get_group_pins = lp_get_group_pins,
|
|
.pin_dbg_show = lp_pin_dbg_show,
|
|
};
|
|
|
|
static int lp_get_functions_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
struct intel_pinctrl *lg = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return lg->soc->nfunctions;
|
|
}
|
|
|
|
static const char *lp_get_function_name(struct pinctrl_dev *pctldev,
|
|
unsigned int selector)
|
|
{
|
|
struct intel_pinctrl *lg = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return lg->soc->functions[selector].name;
|
|
}
|
|
|
|
static int lp_get_function_groups(struct pinctrl_dev *pctldev,
|
|
unsigned int selector,
|
|
const char * const **groups,
|
|
unsigned int *num_groups)
|
|
{
|
|
struct intel_pinctrl *lg = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
*groups = lg->soc->functions[selector].groups;
|
|
*num_groups = lg->soc->functions[selector].ngroups;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lp_pinmux_set_mux(struct pinctrl_dev *pctldev,
|
|
unsigned int function, unsigned int group)
|
|
{
|
|
struct intel_pinctrl *lg = pinctrl_dev_get_drvdata(pctldev);
|
|
const struct intel_pingroup *grp = &lg->soc->groups[group];
|
|
unsigned long flags;
|
|
int i;
|
|
|
|
raw_spin_lock_irqsave(&lg->lock, flags);
|
|
|
|
/* Now enable the mux setting for each pin in the group */
|
|
for (i = 0; i < grp->npins; i++) {
|
|
void __iomem *reg = lp_gpio_reg(&lg->chip, grp->pins[i], LP_CONFIG1);
|
|
u32 value;
|
|
|
|
value = ioread32(reg);
|
|
|
|
value &= ~USE_SEL_MASK;
|
|
if (grp->modes)
|
|
value |= grp->modes[i];
|
|
else
|
|
value |= grp->mode;
|
|
|
|
iowrite32(value, reg);
|
|
}
|
|
|
|
raw_spin_unlock_irqrestore(&lg->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void lp_gpio_enable_input(void __iomem *reg)
|
|
{
|
|
iowrite32(ioread32(reg) & ~GPINDIS_BIT, reg);
|
|
}
|
|
|
|
static void lp_gpio_disable_input(void __iomem *reg)
|
|
{
|
|
iowrite32(ioread32(reg) | GPINDIS_BIT, reg);
|
|
}
|
|
|
|
static int lp_gpio_request_enable(struct pinctrl_dev *pctldev,
|
|
struct pinctrl_gpio_range *range,
|
|
unsigned int pin)
|
|
{
|
|
struct intel_pinctrl *lg = pinctrl_dev_get_drvdata(pctldev);
|
|
void __iomem *reg = lp_gpio_reg(&lg->chip, pin, LP_CONFIG1);
|
|
void __iomem *conf2 = lp_gpio_reg(&lg->chip, pin, LP_CONFIG2);
|
|
unsigned long flags;
|
|
u32 value;
|
|
|
|
pm_runtime_get(lg->dev);
|
|
|
|
raw_spin_lock_irqsave(&lg->lock, flags);
|
|
|
|
/*
|
|
* Reconfigure pin to GPIO mode if needed and issue a warning,
|
|
* since we expect firmware to configure it properly.
|
|
*/
|
|
value = ioread32(reg);
|
|
if ((value & USE_SEL_MASK) != USE_SEL_GPIO) {
|
|
iowrite32((value & USE_SEL_MASK) | USE_SEL_GPIO, reg);
|
|
dev_warn(lg->dev, FW_BUG "pin %u forcibly reconfigured as GPIO\n", pin);
|
|
}
|
|
|
|
/* Enable input sensing */
|
|
lp_gpio_enable_input(conf2);
|
|
|
|
raw_spin_unlock_irqrestore(&lg->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void lp_gpio_disable_free(struct pinctrl_dev *pctldev,
|
|
struct pinctrl_gpio_range *range,
|
|
unsigned int pin)
|
|
{
|
|
struct intel_pinctrl *lg = pinctrl_dev_get_drvdata(pctldev);
|
|
void __iomem *conf2 = lp_gpio_reg(&lg->chip, pin, LP_CONFIG2);
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&lg->lock, flags);
|
|
|
|
/* Disable input sensing */
|
|
lp_gpio_disable_input(conf2);
|
|
|
|
raw_spin_unlock_irqrestore(&lg->lock, flags);
|
|
|
|
pm_runtime_put(lg->dev);
|
|
}
|
|
|
|
static int lp_gpio_set_direction(struct pinctrl_dev *pctldev,
|
|
struct pinctrl_gpio_range *range,
|
|
unsigned int pin, bool input)
|
|
{
|
|
struct intel_pinctrl *lg = pinctrl_dev_get_drvdata(pctldev);
|
|
void __iomem *reg = lp_gpio_reg(&lg->chip, pin, LP_CONFIG1);
|
|
unsigned long flags;
|
|
u32 value;
|
|
|
|
raw_spin_lock_irqsave(&lg->lock, flags);
|
|
|
|
value = ioread32(reg);
|
|
value &= ~DIR_BIT;
|
|
if (input) {
|
|
value |= DIR_BIT;
|
|
} else {
|
|
/*
|
|
* Before making any direction modifications, do a check if GPIO
|
|
* is set for direct IRQ. On Lynxpoint, setting GPIO to output
|
|
* does not make sense, so let's at least warn the caller before
|
|
* they shoot themselves in the foot.
|
|
*/
|
|
WARN(lp_gpio_ioxapic_use(&lg->chip, pin),
|
|
"Potential Error: Setting GPIO to output with IOxAPIC redirection");
|
|
}
|
|
iowrite32(value, reg);
|
|
|
|
raw_spin_unlock_irqrestore(&lg->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pinmux_ops lptlp_pinmux_ops = {
|
|
.get_functions_count = lp_get_functions_count,
|
|
.get_function_name = lp_get_function_name,
|
|
.get_function_groups = lp_get_function_groups,
|
|
.set_mux = lp_pinmux_set_mux,
|
|
.gpio_request_enable = lp_gpio_request_enable,
|
|
.gpio_disable_free = lp_gpio_disable_free,
|
|
.gpio_set_direction = lp_gpio_set_direction,
|
|
};
|
|
|
|
static int lp_pin_config_get(struct pinctrl_dev *pctldev, unsigned int pin,
|
|
unsigned long *config)
|
|
{
|
|
struct intel_pinctrl *lg = pinctrl_dev_get_drvdata(pctldev);
|
|
void __iomem *conf2 = lp_gpio_reg(&lg->chip, pin, LP_CONFIG2);
|
|
enum pin_config_param param = pinconf_to_config_param(*config);
|
|
unsigned long flags;
|
|
u32 value, pull;
|
|
u16 arg;
|
|
|
|
raw_spin_lock_irqsave(&lg->lock, flags);
|
|
value = ioread32(conf2);
|
|
raw_spin_unlock_irqrestore(&lg->lock, flags);
|
|
|
|
pull = value & GPIWP_MASK;
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_BIAS_DISABLE:
|
|
if (pull != GPIWP_NONE)
|
|
return -EINVAL;
|
|
arg = 0;
|
|
break;
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
if (pull != GPIWP_DOWN)
|
|
return -EINVAL;
|
|
|
|
arg = 1;
|
|
break;
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
if (pull != GPIWP_UP)
|
|
return -EINVAL;
|
|
|
|
arg = 1;
|
|
break;
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
*config = pinconf_to_config_packed(param, arg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lp_pin_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
|
|
unsigned long *configs, unsigned int num_configs)
|
|
{
|
|
struct intel_pinctrl *lg = pinctrl_dev_get_drvdata(pctldev);
|
|
void __iomem *conf2 = lp_gpio_reg(&lg->chip, pin, LP_CONFIG2);
|
|
enum pin_config_param param;
|
|
unsigned long flags;
|
|
int i, ret = 0;
|
|
u32 value;
|
|
|
|
raw_spin_lock_irqsave(&lg->lock, flags);
|
|
|
|
value = ioread32(conf2);
|
|
|
|
for (i = 0; i < num_configs; i++) {
|
|
param = pinconf_to_config_param(configs[i]);
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_BIAS_DISABLE:
|
|
value &= ~GPIWP_MASK;
|
|
value |= GPIWP_NONE;
|
|
break;
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
value &= ~GPIWP_MASK;
|
|
value |= GPIWP_DOWN;
|
|
break;
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
value &= ~GPIWP_MASK;
|
|
value |= GPIWP_UP;
|
|
break;
|
|
default:
|
|
ret = -ENOTSUPP;
|
|
}
|
|
|
|
if (ret)
|
|
break;
|
|
}
|
|
|
|
if (!ret)
|
|
iowrite32(value, conf2);
|
|
|
|
raw_spin_unlock_irqrestore(&lg->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct pinconf_ops lptlp_pinconf_ops = {
|
|
.is_generic = true,
|
|
.pin_config_get = lp_pin_config_get,
|
|
.pin_config_set = lp_pin_config_set,
|
|
};
|
|
|
|
static const struct pinctrl_desc lptlp_pinctrl_desc = {
|
|
.pctlops = &lptlp_pinctrl_ops,
|
|
.pmxops = &lptlp_pinmux_ops,
|
|
.confops = &lptlp_pinconf_ops,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int lp_gpio_get(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
void __iomem *reg = lp_gpio_reg(chip, offset, LP_CONFIG1);
|
|
return !!(ioread32(reg) & IN_LVL_BIT);
|
|
}
|
|
|
|
static void lp_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
|
|
{
|
|
struct intel_pinctrl *lg = gpiochip_get_data(chip);
|
|
void __iomem *reg = lp_gpio_reg(chip, offset, LP_CONFIG1);
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&lg->lock, flags);
|
|
|
|
if (value)
|
|
iowrite32(ioread32(reg) | OUT_LVL_BIT, reg);
|
|
else
|
|
iowrite32(ioread32(reg) & ~OUT_LVL_BIT, reg);
|
|
|
|
raw_spin_unlock_irqrestore(&lg->lock, flags);
|
|
}
|
|
|
|
static int lp_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
return pinctrl_gpio_direction_input(chip->base + offset);
|
|
}
|
|
|
|
static int lp_gpio_direction_output(struct gpio_chip *chip, unsigned int offset,
|
|
int value)
|
|
{
|
|
lp_gpio_set(chip, offset, value);
|
|
|
|
return pinctrl_gpio_direction_output(chip->base + offset);
|
|
}
|
|
|
|
static int lp_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
void __iomem *reg = lp_gpio_reg(chip, offset, LP_CONFIG1);
|
|
|
|
if (ioread32(reg) & DIR_BIT)
|
|
return GPIO_LINE_DIRECTION_IN;
|
|
|
|
return GPIO_LINE_DIRECTION_OUT;
|
|
}
|
|
|
|
static void lp_gpio_irq_handler(struct irq_desc *desc)
|
|
{
|
|
struct irq_data *data = irq_desc_get_irq_data(desc);
|
|
struct gpio_chip *gc = irq_desc_get_handler_data(desc);
|
|
struct intel_pinctrl *lg = gpiochip_get_data(gc);
|
|
struct irq_chip *chip = irq_data_get_irq_chip(data);
|
|
void __iomem *reg, *ena;
|
|
unsigned long pending;
|
|
u32 base, pin;
|
|
|
|
/* check from GPIO controller which pin triggered the interrupt */
|
|
for (base = 0; base < lg->chip.ngpio; base += 32) {
|
|
reg = lp_gpio_reg(&lg->chip, base, LP_INT_STAT);
|
|
ena = lp_gpio_reg(&lg->chip, base, LP_INT_ENABLE);
|
|
|
|
/* Only interrupts that are enabled */
|
|
pending = ioread32(reg) & ioread32(ena);
|
|
|
|
for_each_set_bit(pin, &pending, 32) {
|
|
unsigned int irq;
|
|
|
|
irq = irq_find_mapping(lg->chip.irq.domain, base + pin);
|
|
generic_handle_irq(irq);
|
|
}
|
|
}
|
|
chip->irq_eoi(data);
|
|
}
|
|
|
|
static void lp_irq_ack(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct intel_pinctrl *lg = gpiochip_get_data(gc);
|
|
u32 hwirq = irqd_to_hwirq(d);
|
|
void __iomem *reg = lp_gpio_reg(&lg->chip, hwirq, LP_INT_STAT);
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&lg->lock, flags);
|
|
iowrite32(BIT(hwirq % 32), reg);
|
|
raw_spin_unlock_irqrestore(&lg->lock, flags);
|
|
}
|
|
|
|
static void lp_irq_unmask(struct irq_data *d)
|
|
{
|
|
}
|
|
|
|
static void lp_irq_mask(struct irq_data *d)
|
|
{
|
|
}
|
|
|
|
static void lp_irq_enable(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct intel_pinctrl *lg = gpiochip_get_data(gc);
|
|
u32 hwirq = irqd_to_hwirq(d);
|
|
void __iomem *reg = lp_gpio_reg(&lg->chip, hwirq, LP_INT_ENABLE);
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&lg->lock, flags);
|
|
iowrite32(ioread32(reg) | BIT(hwirq % 32), reg);
|
|
raw_spin_unlock_irqrestore(&lg->lock, flags);
|
|
}
|
|
|
|
static void lp_irq_disable(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct intel_pinctrl *lg = gpiochip_get_data(gc);
|
|
u32 hwirq = irqd_to_hwirq(d);
|
|
void __iomem *reg = lp_gpio_reg(&lg->chip, hwirq, LP_INT_ENABLE);
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&lg->lock, flags);
|
|
iowrite32(ioread32(reg) & ~BIT(hwirq % 32), reg);
|
|
raw_spin_unlock_irqrestore(&lg->lock, flags);
|
|
}
|
|
|
|
static int lp_irq_set_type(struct irq_data *d, unsigned int type)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct intel_pinctrl *lg = gpiochip_get_data(gc);
|
|
u32 hwirq = irqd_to_hwirq(d);
|
|
void __iomem *reg = lp_gpio_reg(&lg->chip, hwirq, LP_CONFIG1);
|
|
unsigned long flags;
|
|
u32 value;
|
|
|
|
if (hwirq >= lg->chip.ngpio)
|
|
return -EINVAL;
|
|
|
|
/* Fail if BIOS reserved pin for ACPI use */
|
|
if (lp_gpio_acpi_use(lg, hwirq)) {
|
|
dev_err(lg->dev, "pin %u can't be used as IRQ\n", hwirq);
|
|
return -EBUSY;
|
|
}
|
|
|
|
raw_spin_lock_irqsave(&lg->lock, flags);
|
|
value = ioread32(reg);
|
|
|
|
/* set both TRIG_SEL and INV bits to 0 for rising edge */
|
|
if (type & IRQ_TYPE_EDGE_RISING)
|
|
value &= ~(TRIG_SEL_BIT | INT_INV_BIT);
|
|
|
|
/* TRIG_SEL bit 0, INV bit 1 for falling edge */
|
|
if (type & IRQ_TYPE_EDGE_FALLING)
|
|
value = (value | INT_INV_BIT) & ~TRIG_SEL_BIT;
|
|
|
|
/* TRIG_SEL bit 1, INV bit 0 for level low */
|
|
if (type & IRQ_TYPE_LEVEL_LOW)
|
|
value = (value | TRIG_SEL_BIT) & ~INT_INV_BIT;
|
|
|
|
/* TRIG_SEL bit 1, INV bit 1 for level high */
|
|
if (type & IRQ_TYPE_LEVEL_HIGH)
|
|
value |= TRIG_SEL_BIT | INT_INV_BIT;
|
|
|
|
iowrite32(value, reg);
|
|
|
|
if (type & IRQ_TYPE_EDGE_BOTH)
|
|
irq_set_handler_locked(d, handle_edge_irq);
|
|
else if (type & IRQ_TYPE_LEVEL_MASK)
|
|
irq_set_handler_locked(d, handle_level_irq);
|
|
|
|
raw_spin_unlock_irqrestore(&lg->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_chip lp_irqchip = {
|
|
.name = "LP-GPIO",
|
|
.irq_ack = lp_irq_ack,
|
|
.irq_mask = lp_irq_mask,
|
|
.irq_unmask = lp_irq_unmask,
|
|
.irq_enable = lp_irq_enable,
|
|
.irq_disable = lp_irq_disable,
|
|
.irq_set_type = lp_irq_set_type,
|
|
.flags = IRQCHIP_SKIP_SET_WAKE,
|
|
};
|
|
|
|
static int lp_gpio_irq_init_hw(struct gpio_chip *chip)
|
|
{
|
|
struct intel_pinctrl *lg = gpiochip_get_data(chip);
|
|
void __iomem *reg;
|
|
unsigned int base;
|
|
|
|
for (base = 0; base < lg->chip.ngpio; base += 32) {
|
|
/* disable gpio pin interrupts */
|
|
reg = lp_gpio_reg(&lg->chip, base, LP_INT_ENABLE);
|
|
iowrite32(0, reg);
|
|
/* Clear interrupt status register */
|
|
reg = lp_gpio_reg(&lg->chip, base, LP_INT_STAT);
|
|
iowrite32(0xffffffff, reg);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lp_gpio_add_pin_ranges(struct gpio_chip *chip)
|
|
{
|
|
struct intel_pinctrl *lg = gpiochip_get_data(chip);
|
|
struct device *dev = lg->dev;
|
|
int ret;
|
|
|
|
ret = gpiochip_add_pin_range(chip, dev_name(dev), 0, 0, lg->soc->npins);
|
|
if (ret)
|
|
dev_err(dev, "failed to add GPIO pin range\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int lp_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
const struct intel_pinctrl_soc_data *soc;
|
|
struct intel_pinctrl *lg;
|
|
struct gpio_chip *gc;
|
|
struct device *dev = &pdev->dev;
|
|
struct resource *io_rc;
|
|
void __iomem *regs;
|
|
unsigned int i;
|
|
int irq, ret;
|
|
|
|
soc = (const struct intel_pinctrl_soc_data *)device_get_match_data(dev);
|
|
if (!soc)
|
|
return -ENODEV;
|
|
|
|
lg = devm_kzalloc(dev, sizeof(*lg), GFP_KERNEL);
|
|
if (!lg)
|
|
return -ENOMEM;
|
|
|
|
lg->dev = dev;
|
|
lg->soc = soc;
|
|
|
|
lg->ncommunities = lg->soc->ncommunities;
|
|
lg->communities = devm_kcalloc(dev, lg->ncommunities,
|
|
sizeof(*lg->communities), GFP_KERNEL);
|
|
if (!lg->communities)
|
|
return -ENOMEM;
|
|
|
|
lg->pctldesc = lptlp_pinctrl_desc;
|
|
lg->pctldesc.name = dev_name(dev);
|
|
lg->pctldesc.pins = lg->soc->pins;
|
|
lg->pctldesc.npins = lg->soc->npins;
|
|
|
|
lg->pctldev = devm_pinctrl_register(dev, &lg->pctldesc, lg);
|
|
if (IS_ERR(lg->pctldev)) {
|
|
dev_err(dev, "failed to register pinctrl driver\n");
|
|
return PTR_ERR(lg->pctldev);
|
|
}
|
|
|
|
platform_set_drvdata(pdev, lg);
|
|
|
|
io_rc = platform_get_resource(pdev, IORESOURCE_IO, 0);
|
|
if (!io_rc) {
|
|
dev_err(dev, "missing IO resources\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
regs = devm_ioport_map(dev, io_rc->start, resource_size(io_rc));
|
|
if (!regs) {
|
|
dev_err(dev, "failed mapping IO region %pR\n", &io_rc);
|
|
return -EBUSY;
|
|
}
|
|
|
|
for (i = 0; i < lg->soc->ncommunities; i++) {
|
|
struct intel_community *comm = &lg->communities[i];
|
|
|
|
*comm = lg->soc->communities[i];
|
|
|
|
comm->regs = regs;
|
|
comm->pad_regs = regs + 0x100;
|
|
}
|
|
|
|
raw_spin_lock_init(&lg->lock);
|
|
|
|
gc = &lg->chip;
|
|
gc->label = dev_name(dev);
|
|
gc->owner = THIS_MODULE;
|
|
gc->request = gpiochip_generic_request;
|
|
gc->free = gpiochip_generic_free;
|
|
gc->direction_input = lp_gpio_direction_input;
|
|
gc->direction_output = lp_gpio_direction_output;
|
|
gc->get = lp_gpio_get;
|
|
gc->set = lp_gpio_set;
|
|
gc->set_config = gpiochip_generic_config;
|
|
gc->get_direction = lp_gpio_get_direction;
|
|
gc->base = -1;
|
|
gc->ngpio = LP_NUM_GPIO;
|
|
gc->can_sleep = false;
|
|
gc->add_pin_ranges = lp_gpio_add_pin_ranges;
|
|
gc->parent = dev;
|
|
|
|
/* set up interrupts */
|
|
irq = platform_get_irq_optional(pdev, 0);
|
|
if (irq > 0) {
|
|
struct gpio_irq_chip *girq;
|
|
|
|
girq = &gc->irq;
|
|
girq->chip = &lp_irqchip;
|
|
girq->init_hw = lp_gpio_irq_init_hw;
|
|
girq->parent_handler = lp_gpio_irq_handler;
|
|
girq->num_parents = 1;
|
|
girq->parents = devm_kcalloc(dev, girq->num_parents,
|
|
sizeof(*girq->parents),
|
|
GFP_KERNEL);
|
|
if (!girq->parents)
|
|
return -ENOMEM;
|
|
girq->parents[0] = irq;
|
|
girq->default_type = IRQ_TYPE_NONE;
|
|
girq->handler = handle_bad_irq;
|
|
}
|
|
|
|
ret = devm_gpiochip_add_data(dev, gc, lg);
|
|
if (ret) {
|
|
dev_err(dev, "failed adding lp-gpio chip\n");
|
|
return ret;
|
|
}
|
|
|
|
pm_runtime_enable(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lp_gpio_remove(struct platform_device *pdev)
|
|
{
|
|
pm_runtime_disable(&pdev->dev);
|
|
return 0;
|
|
}
|
|
|
|
static int lp_gpio_runtime_suspend(struct device *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int lp_gpio_runtime_resume(struct device *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int lp_gpio_resume(struct device *dev)
|
|
{
|
|
struct intel_pinctrl *lg = dev_get_drvdata(dev);
|
|
struct gpio_chip *chip = &lg->chip;
|
|
const char *dummy;
|
|
int i;
|
|
|
|
/* on some hardware suspend clears input sensing, re-enable it here */
|
|
for_each_requested_gpio(chip, i, dummy)
|
|
lp_gpio_enable_input(lp_gpio_reg(chip, i, LP_CONFIG2));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops lp_gpio_pm_ops = {
|
|
.runtime_suspend = lp_gpio_runtime_suspend,
|
|
.runtime_resume = lp_gpio_runtime_resume,
|
|
.resume = lp_gpio_resume,
|
|
};
|
|
|
|
static const struct acpi_device_id lynxpoint_gpio_acpi_match[] = {
|
|
{ "INT33C7", (kernel_ulong_t)&lptlp_soc_data },
|
|
{ "INT3437", (kernel_ulong_t)&lptlp_soc_data },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, lynxpoint_gpio_acpi_match);
|
|
|
|
static struct platform_driver lp_gpio_driver = {
|
|
.probe = lp_gpio_probe,
|
|
.remove = lp_gpio_remove,
|
|
.driver = {
|
|
.name = "lp_gpio",
|
|
.pm = &lp_gpio_pm_ops,
|
|
.acpi_match_table = lynxpoint_gpio_acpi_match,
|
|
},
|
|
};
|
|
|
|
static int __init lp_gpio_init(void)
|
|
{
|
|
return platform_driver_register(&lp_gpio_driver);
|
|
}
|
|
subsys_initcall(lp_gpio_init);
|
|
|
|
static void __exit lp_gpio_exit(void)
|
|
{
|
|
platform_driver_unregister(&lp_gpio_driver);
|
|
}
|
|
module_exit(lp_gpio_exit);
|
|
|
|
MODULE_AUTHOR("Mathias Nyman (Intel)");
|
|
MODULE_AUTHOR("Andy Shevchenko (Intel)");
|
|
MODULE_DESCRIPTION("Intel Lynxpoint pinctrl driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:lp_gpio");
|