1548 lines
37 KiB
C
1548 lines
37 KiB
C
/*
|
|
* OMAP2 display controller support
|
|
*
|
|
* Copyright (C) 2005 Nokia Corporation
|
|
* Author: Imre Deak <imre.deak@nokia.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <plat/sram.h>
|
|
#include <plat/board.h>
|
|
|
|
#include "omapfb.h"
|
|
#include "dispc.h"
|
|
|
|
#define MODULE_NAME "dispc"
|
|
|
|
#define DSS_BASE 0x48050000
|
|
#define DSS_SYSCONFIG 0x0010
|
|
|
|
#define DISPC_BASE 0x48050400
|
|
|
|
/* DISPC common */
|
|
#define DISPC_REVISION 0x0000
|
|
#define DISPC_SYSCONFIG 0x0010
|
|
#define DISPC_SYSSTATUS 0x0014
|
|
#define DISPC_IRQSTATUS 0x0018
|
|
#define DISPC_IRQENABLE 0x001C
|
|
#define DISPC_CONTROL 0x0040
|
|
#define DISPC_CONFIG 0x0044
|
|
#define DISPC_CAPABLE 0x0048
|
|
#define DISPC_DEFAULT_COLOR0 0x004C
|
|
#define DISPC_DEFAULT_COLOR1 0x0050
|
|
#define DISPC_TRANS_COLOR0 0x0054
|
|
#define DISPC_TRANS_COLOR1 0x0058
|
|
#define DISPC_LINE_STATUS 0x005C
|
|
#define DISPC_LINE_NUMBER 0x0060
|
|
#define DISPC_TIMING_H 0x0064
|
|
#define DISPC_TIMING_V 0x0068
|
|
#define DISPC_POL_FREQ 0x006C
|
|
#define DISPC_DIVISOR 0x0070
|
|
#define DISPC_SIZE_DIG 0x0078
|
|
#define DISPC_SIZE_LCD 0x007C
|
|
|
|
#define DISPC_DATA_CYCLE1 0x01D4
|
|
#define DISPC_DATA_CYCLE2 0x01D8
|
|
#define DISPC_DATA_CYCLE3 0x01DC
|
|
|
|
/* DISPC GFX plane */
|
|
#define DISPC_GFX_BA0 0x0080
|
|
#define DISPC_GFX_BA1 0x0084
|
|
#define DISPC_GFX_POSITION 0x0088
|
|
#define DISPC_GFX_SIZE 0x008C
|
|
#define DISPC_GFX_ATTRIBUTES 0x00A0
|
|
#define DISPC_GFX_FIFO_THRESHOLD 0x00A4
|
|
#define DISPC_GFX_FIFO_SIZE_STATUS 0x00A8
|
|
#define DISPC_GFX_ROW_INC 0x00AC
|
|
#define DISPC_GFX_PIXEL_INC 0x00B0
|
|
#define DISPC_GFX_WINDOW_SKIP 0x00B4
|
|
#define DISPC_GFX_TABLE_BA 0x00B8
|
|
|
|
/* DISPC Video plane 1/2 */
|
|
#define DISPC_VID1_BASE 0x00BC
|
|
#define DISPC_VID2_BASE 0x014C
|
|
|
|
/* Offsets into DISPC_VID1/2_BASE */
|
|
#define DISPC_VID_BA0 0x0000
|
|
#define DISPC_VID_BA1 0x0004
|
|
#define DISPC_VID_POSITION 0x0008
|
|
#define DISPC_VID_SIZE 0x000C
|
|
#define DISPC_VID_ATTRIBUTES 0x0010
|
|
#define DISPC_VID_FIFO_THRESHOLD 0x0014
|
|
#define DISPC_VID_FIFO_SIZE_STATUS 0x0018
|
|
#define DISPC_VID_ROW_INC 0x001C
|
|
#define DISPC_VID_PIXEL_INC 0x0020
|
|
#define DISPC_VID_FIR 0x0024
|
|
#define DISPC_VID_PICTURE_SIZE 0x0028
|
|
#define DISPC_VID_ACCU0 0x002C
|
|
#define DISPC_VID_ACCU1 0x0030
|
|
|
|
/* 8 elements in 8 byte increments */
|
|
#define DISPC_VID_FIR_COEF_H0 0x0034
|
|
/* 8 elements in 8 byte increments */
|
|
#define DISPC_VID_FIR_COEF_HV0 0x0038
|
|
/* 5 elements in 4 byte increments */
|
|
#define DISPC_VID_CONV_COEF0 0x0074
|
|
|
|
#define DISPC_IRQ_FRAMEMASK 0x0001
|
|
#define DISPC_IRQ_VSYNC 0x0002
|
|
#define DISPC_IRQ_EVSYNC_EVEN 0x0004
|
|
#define DISPC_IRQ_EVSYNC_ODD 0x0008
|
|
#define DISPC_IRQ_ACBIAS_COUNT_STAT 0x0010
|
|
#define DISPC_IRQ_PROG_LINE_NUM 0x0020
|
|
#define DISPC_IRQ_GFX_FIFO_UNDERFLOW 0x0040
|
|
#define DISPC_IRQ_GFX_END_WIN 0x0080
|
|
#define DISPC_IRQ_PAL_GAMMA_MASK 0x0100
|
|
#define DISPC_IRQ_OCP_ERR 0x0200
|
|
#define DISPC_IRQ_VID1_FIFO_UNDERFLOW 0x0400
|
|
#define DISPC_IRQ_VID1_END_WIN 0x0800
|
|
#define DISPC_IRQ_VID2_FIFO_UNDERFLOW 0x1000
|
|
#define DISPC_IRQ_VID2_END_WIN 0x2000
|
|
#define DISPC_IRQ_SYNC_LOST 0x4000
|
|
|
|
#define DISPC_IRQ_MASK_ALL 0x7fff
|
|
|
|
#define DISPC_IRQ_MASK_ERROR (DISPC_IRQ_GFX_FIFO_UNDERFLOW | \
|
|
DISPC_IRQ_VID1_FIFO_UNDERFLOW | \
|
|
DISPC_IRQ_VID2_FIFO_UNDERFLOW | \
|
|
DISPC_IRQ_SYNC_LOST)
|
|
|
|
#define RFBI_CONTROL 0x48050040
|
|
|
|
#define MAX_PALETTE_SIZE (256 * 16)
|
|
|
|
#define FLD_MASK(pos, len) (((1 << len) - 1) << pos)
|
|
|
|
#define MOD_REG_FLD(reg, mask, val) \
|
|
dispc_write_reg((reg), (dispc_read_reg(reg) & ~(mask)) | (val));
|
|
|
|
#define OMAP2_SRAM_START 0x40200000
|
|
/* Maximum size, in reality this is smaller if SRAM is partially locked. */
|
|
#define OMAP2_SRAM_SIZE 0xa0000 /* 640k */
|
|
|
|
/* We support the SDRAM / SRAM types. See OMAPFB_PLANE_MEMTYPE_* in omapfb.h */
|
|
#define DISPC_MEMTYPE_NUM 2
|
|
|
|
#define RESMAP_SIZE(_page_cnt) \
|
|
((_page_cnt + (sizeof(unsigned long) * 8) - 1) / 8)
|
|
#define RESMAP_PTR(_res_map, _page_nr) \
|
|
(((_res_map)->map) + (_page_nr) / (sizeof(unsigned long) * 8))
|
|
#define RESMAP_MASK(_page_nr) \
|
|
(1 << ((_page_nr) & (sizeof(unsigned long) * 8 - 1)))
|
|
|
|
struct resmap {
|
|
unsigned long start;
|
|
unsigned page_cnt;
|
|
unsigned long *map;
|
|
};
|
|
|
|
#define MAX_IRQ_HANDLERS 4
|
|
|
|
static struct {
|
|
void __iomem *base;
|
|
|
|
struct omapfb_mem_desc mem_desc;
|
|
struct resmap *res_map[DISPC_MEMTYPE_NUM];
|
|
atomic_t map_count[OMAPFB_PLANE_NUM];
|
|
|
|
dma_addr_t palette_paddr;
|
|
void *palette_vaddr;
|
|
|
|
int ext_mode;
|
|
|
|
struct {
|
|
u32 irq_mask;
|
|
void (*callback)(void *);
|
|
void *data;
|
|
} irq_handlers[MAX_IRQ_HANDLERS];
|
|
struct completion frame_done;
|
|
|
|
int fir_hinc[OMAPFB_PLANE_NUM];
|
|
int fir_vinc[OMAPFB_PLANE_NUM];
|
|
|
|
struct clk *dss_ick, *dss1_fck;
|
|
struct clk *dss_54m_fck;
|
|
|
|
enum omapfb_update_mode update_mode;
|
|
struct omapfb_device *fbdev;
|
|
|
|
struct omapfb_color_key color_key;
|
|
} dispc;
|
|
|
|
static void enable_lcd_clocks(int enable);
|
|
|
|
static void inline dispc_write_reg(int idx, u32 val)
|
|
{
|
|
__raw_writel(val, dispc.base + idx);
|
|
}
|
|
|
|
static u32 inline dispc_read_reg(int idx)
|
|
{
|
|
u32 l = __raw_readl(dispc.base + idx);
|
|
return l;
|
|
}
|
|
|
|
/* Select RFBI or bypass mode */
|
|
static void enable_rfbi_mode(int enable)
|
|
{
|
|
void __iomem *rfbi_control;
|
|
u32 l;
|
|
|
|
l = dispc_read_reg(DISPC_CONTROL);
|
|
/* Enable RFBI, GPIO0/1 */
|
|
l &= ~((1 << 11) | (1 << 15) | (1 << 16));
|
|
l |= enable ? (1 << 11) : 0;
|
|
/* RFBI En: GPIO0/1=10 RFBI Dis: GPIO0/1=11 */
|
|
l |= 1 << 15;
|
|
l |= enable ? 0 : (1 << 16);
|
|
dispc_write_reg(DISPC_CONTROL, l);
|
|
|
|
/* Set bypass mode in RFBI module */
|
|
rfbi_control = ioremap(RFBI_CONTROL, SZ_1K);
|
|
if (!rfbi_control) {
|
|
pr_err("Unable to ioremap rfbi_control\n");
|
|
return;
|
|
}
|
|
l = __raw_readl(rfbi_control);
|
|
l |= enable ? 0 : (1 << 1);
|
|
__raw_writel(l, rfbi_control);
|
|
iounmap(rfbi_control);
|
|
}
|
|
|
|
static void set_lcd_data_lines(int data_lines)
|
|
{
|
|
u32 l;
|
|
int code = 0;
|
|
|
|
switch (data_lines) {
|
|
case 12:
|
|
code = 0;
|
|
break;
|
|
case 16:
|
|
code = 1;
|
|
break;
|
|
case 18:
|
|
code = 2;
|
|
break;
|
|
case 24:
|
|
code = 3;
|
|
break;
|
|
default:
|
|
BUG();
|
|
}
|
|
|
|
l = dispc_read_reg(DISPC_CONTROL);
|
|
l &= ~(0x03 << 8);
|
|
l |= code << 8;
|
|
dispc_write_reg(DISPC_CONTROL, l);
|
|
}
|
|
|
|
static void set_load_mode(int mode)
|
|
{
|
|
BUG_ON(mode & ~(DISPC_LOAD_CLUT_ONLY | DISPC_LOAD_FRAME_ONLY |
|
|
DISPC_LOAD_CLUT_ONCE_FRAME));
|
|
MOD_REG_FLD(DISPC_CONFIG, 0x03 << 1, mode << 1);
|
|
}
|
|
|
|
void omap_dispc_set_lcd_size(int x, int y)
|
|
{
|
|
BUG_ON((x > (1 << 11)) || (y > (1 << 11)));
|
|
enable_lcd_clocks(1);
|
|
MOD_REG_FLD(DISPC_SIZE_LCD, FLD_MASK(16, 11) | FLD_MASK(0, 11),
|
|
((y - 1) << 16) | (x - 1));
|
|
enable_lcd_clocks(0);
|
|
}
|
|
EXPORT_SYMBOL(omap_dispc_set_lcd_size);
|
|
|
|
void omap_dispc_set_digit_size(int x, int y)
|
|
{
|
|
BUG_ON((x > (1 << 11)) || (y > (1 << 11)));
|
|
enable_lcd_clocks(1);
|
|
MOD_REG_FLD(DISPC_SIZE_DIG, FLD_MASK(16, 11) | FLD_MASK(0, 11),
|
|
((y - 1) << 16) | (x - 1));
|
|
enable_lcd_clocks(0);
|
|
}
|
|
EXPORT_SYMBOL(omap_dispc_set_digit_size);
|
|
|
|
static void setup_plane_fifo(int plane, int ext_mode)
|
|
{
|
|
const u32 ftrs_reg[] = { DISPC_GFX_FIFO_THRESHOLD,
|
|
DISPC_VID1_BASE + DISPC_VID_FIFO_THRESHOLD,
|
|
DISPC_VID2_BASE + DISPC_VID_FIFO_THRESHOLD };
|
|
const u32 fsz_reg[] = { DISPC_GFX_FIFO_SIZE_STATUS,
|
|
DISPC_VID1_BASE + DISPC_VID_FIFO_SIZE_STATUS,
|
|
DISPC_VID2_BASE + DISPC_VID_FIFO_SIZE_STATUS };
|
|
int low, high;
|
|
u32 l;
|
|
|
|
BUG_ON(plane > 2);
|
|
|
|
l = dispc_read_reg(fsz_reg[plane]);
|
|
l &= FLD_MASK(0, 11);
|
|
if (ext_mode) {
|
|
low = l * 3 / 4;
|
|
high = l;
|
|
} else {
|
|
low = l / 4;
|
|
high = l * 3 / 4;
|
|
}
|
|
MOD_REG_FLD(ftrs_reg[plane], FLD_MASK(16, 12) | FLD_MASK(0, 12),
|
|
(high << 16) | low);
|
|
}
|
|
|
|
void omap_dispc_enable_lcd_out(int enable)
|
|
{
|
|
enable_lcd_clocks(1);
|
|
MOD_REG_FLD(DISPC_CONTROL, 1, enable ? 1 : 0);
|
|
enable_lcd_clocks(0);
|
|
}
|
|
EXPORT_SYMBOL(omap_dispc_enable_lcd_out);
|
|
|
|
void omap_dispc_enable_digit_out(int enable)
|
|
{
|
|
enable_lcd_clocks(1);
|
|
MOD_REG_FLD(DISPC_CONTROL, 1 << 1, enable ? 1 << 1 : 0);
|
|
enable_lcd_clocks(0);
|
|
}
|
|
EXPORT_SYMBOL(omap_dispc_enable_digit_out);
|
|
|
|
static inline int _setup_plane(int plane, int channel_out,
|
|
u32 paddr, int screen_width,
|
|
int pos_x, int pos_y, int width, int height,
|
|
int color_mode)
|
|
{
|
|
const u32 at_reg[] = { DISPC_GFX_ATTRIBUTES,
|
|
DISPC_VID1_BASE + DISPC_VID_ATTRIBUTES,
|
|
DISPC_VID2_BASE + DISPC_VID_ATTRIBUTES };
|
|
const u32 ba_reg[] = { DISPC_GFX_BA0, DISPC_VID1_BASE + DISPC_VID_BA0,
|
|
DISPC_VID2_BASE + DISPC_VID_BA0 };
|
|
const u32 ps_reg[] = { DISPC_GFX_POSITION,
|
|
DISPC_VID1_BASE + DISPC_VID_POSITION,
|
|
DISPC_VID2_BASE + DISPC_VID_POSITION };
|
|
const u32 sz_reg[] = { DISPC_GFX_SIZE,
|
|
DISPC_VID1_BASE + DISPC_VID_PICTURE_SIZE,
|
|
DISPC_VID2_BASE + DISPC_VID_PICTURE_SIZE };
|
|
const u32 ri_reg[] = { DISPC_GFX_ROW_INC,
|
|
DISPC_VID1_BASE + DISPC_VID_ROW_INC,
|
|
DISPC_VID2_BASE + DISPC_VID_ROW_INC };
|
|
const u32 vs_reg[] = { 0, DISPC_VID1_BASE + DISPC_VID_SIZE,
|
|
DISPC_VID2_BASE + DISPC_VID_SIZE };
|
|
|
|
int chout_shift, burst_shift;
|
|
int chout_val;
|
|
int color_code;
|
|
int bpp;
|
|
int cconv_en;
|
|
int set_vsize;
|
|
u32 l;
|
|
|
|
#ifdef VERBOSE
|
|
dev_dbg(dispc.fbdev->dev, "plane %d channel %d paddr %#08x scr_width %d"
|
|
" pos_x %d pos_y %d width %d height %d color_mode %d\n",
|
|
plane, channel_out, paddr, screen_width, pos_x, pos_y,
|
|
width, height, color_mode);
|
|
#endif
|
|
|
|
set_vsize = 0;
|
|
switch (plane) {
|
|
case OMAPFB_PLANE_GFX:
|
|
burst_shift = 6;
|
|
chout_shift = 8;
|
|
break;
|
|
case OMAPFB_PLANE_VID1:
|
|
case OMAPFB_PLANE_VID2:
|
|
burst_shift = 14;
|
|
chout_shift = 16;
|
|
set_vsize = 1;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (channel_out) {
|
|
case OMAPFB_CHANNEL_OUT_LCD:
|
|
chout_val = 0;
|
|
break;
|
|
case OMAPFB_CHANNEL_OUT_DIGIT:
|
|
chout_val = 1;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
cconv_en = 0;
|
|
switch (color_mode) {
|
|
case OMAPFB_COLOR_RGB565:
|
|
color_code = DISPC_RGB_16_BPP;
|
|
bpp = 16;
|
|
break;
|
|
case OMAPFB_COLOR_YUV422:
|
|
if (plane == 0)
|
|
return -EINVAL;
|
|
color_code = DISPC_UYVY_422;
|
|
cconv_en = 1;
|
|
bpp = 16;
|
|
break;
|
|
case OMAPFB_COLOR_YUY422:
|
|
if (plane == 0)
|
|
return -EINVAL;
|
|
color_code = DISPC_YUV2_422;
|
|
cconv_en = 1;
|
|
bpp = 16;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
l = dispc_read_reg(at_reg[plane]);
|
|
|
|
l &= ~(0x0f << 1);
|
|
l |= color_code << 1;
|
|
l &= ~(1 << 9);
|
|
l |= cconv_en << 9;
|
|
|
|
l &= ~(0x03 << burst_shift);
|
|
l |= DISPC_BURST_8x32 << burst_shift;
|
|
|
|
l &= ~(1 << chout_shift);
|
|
l |= chout_val << chout_shift;
|
|
|
|
dispc_write_reg(at_reg[plane], l);
|
|
|
|
dispc_write_reg(ba_reg[plane], paddr);
|
|
MOD_REG_FLD(ps_reg[plane],
|
|
FLD_MASK(16, 11) | FLD_MASK(0, 11), (pos_y << 16) | pos_x);
|
|
|
|
MOD_REG_FLD(sz_reg[plane], FLD_MASK(16, 11) | FLD_MASK(0, 11),
|
|
((height - 1) << 16) | (width - 1));
|
|
|
|
if (set_vsize) {
|
|
/* Set video size if set_scale hasn't set it */
|
|
if (!dispc.fir_vinc[plane])
|
|
MOD_REG_FLD(vs_reg[plane],
|
|
FLD_MASK(16, 11), (height - 1) << 16);
|
|
if (!dispc.fir_hinc[plane])
|
|
MOD_REG_FLD(vs_reg[plane],
|
|
FLD_MASK(0, 11), width - 1);
|
|
}
|
|
|
|
dispc_write_reg(ri_reg[plane], (screen_width - width) * bpp / 8 + 1);
|
|
|
|
return height * screen_width * bpp / 8;
|
|
}
|
|
|
|
static int omap_dispc_setup_plane(int plane, int channel_out,
|
|
unsigned long offset,
|
|
int screen_width,
|
|
int pos_x, int pos_y, int width, int height,
|
|
int color_mode)
|
|
{
|
|
u32 paddr;
|
|
int r;
|
|
|
|
if ((unsigned)plane > dispc.mem_desc.region_cnt)
|
|
return -EINVAL;
|
|
paddr = dispc.mem_desc.region[plane].paddr + offset;
|
|
enable_lcd_clocks(1);
|
|
r = _setup_plane(plane, channel_out, paddr,
|
|
screen_width,
|
|
pos_x, pos_y, width, height, color_mode);
|
|
enable_lcd_clocks(0);
|
|
return r;
|
|
}
|
|
|
|
static void write_firh_reg(int plane, int reg, u32 value)
|
|
{
|
|
u32 base;
|
|
|
|
if (plane == 1)
|
|
base = DISPC_VID1_BASE + DISPC_VID_FIR_COEF_H0;
|
|
else
|
|
base = DISPC_VID2_BASE + DISPC_VID_FIR_COEF_H0;
|
|
dispc_write_reg(base + reg * 8, value);
|
|
}
|
|
|
|
static void write_firhv_reg(int plane, int reg, u32 value)
|
|
{
|
|
u32 base;
|
|
|
|
if (plane == 1)
|
|
base = DISPC_VID1_BASE + DISPC_VID_FIR_COEF_HV0;
|
|
else
|
|
base = DISPC_VID2_BASE + DISPC_VID_FIR_COEF_HV0;
|
|
dispc_write_reg(base + reg * 8, value);
|
|
}
|
|
|
|
static void set_upsampling_coef_table(int plane)
|
|
{
|
|
const u32 coef[][2] = {
|
|
{ 0x00800000, 0x00800000 },
|
|
{ 0x0D7CF800, 0x037B02FF },
|
|
{ 0x1E70F5FF, 0x0C6F05FE },
|
|
{ 0x335FF5FE, 0x205907FB },
|
|
{ 0xF74949F7, 0x00404000 },
|
|
{ 0xF55F33FB, 0x075920FE },
|
|
{ 0xF5701EFE, 0x056F0CFF },
|
|
{ 0xF87C0DFF, 0x027B0300 },
|
|
};
|
|
int i;
|
|
|
|
for (i = 0; i < 8; i++) {
|
|
write_firh_reg(plane, i, coef[i][0]);
|
|
write_firhv_reg(plane, i, coef[i][1]);
|
|
}
|
|
}
|
|
|
|
static int omap_dispc_set_scale(int plane,
|
|
int orig_width, int orig_height,
|
|
int out_width, int out_height)
|
|
{
|
|
const u32 at_reg[] = { 0, DISPC_VID1_BASE + DISPC_VID_ATTRIBUTES,
|
|
DISPC_VID2_BASE + DISPC_VID_ATTRIBUTES };
|
|
const u32 vs_reg[] = { 0, DISPC_VID1_BASE + DISPC_VID_SIZE,
|
|
DISPC_VID2_BASE + DISPC_VID_SIZE };
|
|
const u32 fir_reg[] = { 0, DISPC_VID1_BASE + DISPC_VID_FIR,
|
|
DISPC_VID2_BASE + DISPC_VID_FIR };
|
|
|
|
u32 l;
|
|
int fir_hinc;
|
|
int fir_vinc;
|
|
|
|
if ((unsigned)plane > OMAPFB_PLANE_NUM)
|
|
return -ENODEV;
|
|
|
|
if (plane == OMAPFB_PLANE_GFX &&
|
|
(out_width != orig_width || out_height != orig_height))
|
|
return -EINVAL;
|
|
|
|
enable_lcd_clocks(1);
|
|
if (orig_width < out_width) {
|
|
/*
|
|
* Upsampling.
|
|
* Currently you can only scale both dimensions in one way.
|
|
*/
|
|
if (orig_height > out_height ||
|
|
orig_width * 8 < out_width ||
|
|
orig_height * 8 < out_height) {
|
|
enable_lcd_clocks(0);
|
|
return -EINVAL;
|
|
}
|
|
set_upsampling_coef_table(plane);
|
|
} else if (orig_width > out_width) {
|
|
/* Downsampling not yet supported
|
|
*/
|
|
|
|
enable_lcd_clocks(0);
|
|
return -EINVAL;
|
|
}
|
|
if (!orig_width || orig_width == out_width)
|
|
fir_hinc = 0;
|
|
else
|
|
fir_hinc = 1024 * orig_width / out_width;
|
|
if (!orig_height || orig_height == out_height)
|
|
fir_vinc = 0;
|
|
else
|
|
fir_vinc = 1024 * orig_height / out_height;
|
|
dispc.fir_hinc[plane] = fir_hinc;
|
|
dispc.fir_vinc[plane] = fir_vinc;
|
|
|
|
MOD_REG_FLD(fir_reg[plane],
|
|
FLD_MASK(16, 12) | FLD_MASK(0, 12),
|
|
((fir_vinc & 4095) << 16) |
|
|
(fir_hinc & 4095));
|
|
|
|
dev_dbg(dispc.fbdev->dev, "out_width %d out_height %d orig_width %d "
|
|
"orig_height %d fir_hinc %d fir_vinc %d\n",
|
|
out_width, out_height, orig_width, orig_height,
|
|
fir_hinc, fir_vinc);
|
|
|
|
MOD_REG_FLD(vs_reg[plane],
|
|
FLD_MASK(16, 11) | FLD_MASK(0, 11),
|
|
((out_height - 1) << 16) | (out_width - 1));
|
|
|
|
l = dispc_read_reg(at_reg[plane]);
|
|
l &= ~(0x03 << 5);
|
|
l |= fir_hinc ? (1 << 5) : 0;
|
|
l |= fir_vinc ? (1 << 6) : 0;
|
|
dispc_write_reg(at_reg[plane], l);
|
|
|
|
enable_lcd_clocks(0);
|
|
return 0;
|
|
}
|
|
|
|
static int omap_dispc_enable_plane(int plane, int enable)
|
|
{
|
|
const u32 at_reg[] = { DISPC_GFX_ATTRIBUTES,
|
|
DISPC_VID1_BASE + DISPC_VID_ATTRIBUTES,
|
|
DISPC_VID2_BASE + DISPC_VID_ATTRIBUTES };
|
|
if ((unsigned int)plane > dispc.mem_desc.region_cnt)
|
|
return -EINVAL;
|
|
|
|
enable_lcd_clocks(1);
|
|
MOD_REG_FLD(at_reg[plane], 1, enable ? 1 : 0);
|
|
enable_lcd_clocks(0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_dispc_set_color_key(struct omapfb_color_key *ck)
|
|
{
|
|
u32 df_reg, tr_reg;
|
|
int shift, val;
|
|
|
|
switch (ck->channel_out) {
|
|
case OMAPFB_CHANNEL_OUT_LCD:
|
|
df_reg = DISPC_DEFAULT_COLOR0;
|
|
tr_reg = DISPC_TRANS_COLOR0;
|
|
shift = 10;
|
|
break;
|
|
case OMAPFB_CHANNEL_OUT_DIGIT:
|
|
df_reg = DISPC_DEFAULT_COLOR1;
|
|
tr_reg = DISPC_TRANS_COLOR1;
|
|
shift = 12;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
switch (ck->key_type) {
|
|
case OMAPFB_COLOR_KEY_DISABLED:
|
|
val = 0;
|
|
break;
|
|
case OMAPFB_COLOR_KEY_GFX_DST:
|
|
val = 1;
|
|
break;
|
|
case OMAPFB_COLOR_KEY_VID_SRC:
|
|
val = 3;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
enable_lcd_clocks(1);
|
|
MOD_REG_FLD(DISPC_CONFIG, FLD_MASK(shift, 2), val << shift);
|
|
|
|
if (val != 0)
|
|
dispc_write_reg(tr_reg, ck->trans_key);
|
|
dispc_write_reg(df_reg, ck->background);
|
|
enable_lcd_clocks(0);
|
|
|
|
dispc.color_key = *ck;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_dispc_get_color_key(struct omapfb_color_key *ck)
|
|
{
|
|
*ck = dispc.color_key;
|
|
return 0;
|
|
}
|
|
|
|
static void load_palette(void)
|
|
{
|
|
}
|
|
|
|
static int omap_dispc_set_update_mode(enum omapfb_update_mode mode)
|
|
{
|
|
int r = 0;
|
|
|
|
if (mode != dispc.update_mode) {
|
|
switch (mode) {
|
|
case OMAPFB_AUTO_UPDATE:
|
|
case OMAPFB_MANUAL_UPDATE:
|
|
enable_lcd_clocks(1);
|
|
omap_dispc_enable_lcd_out(1);
|
|
dispc.update_mode = mode;
|
|
break;
|
|
case OMAPFB_UPDATE_DISABLED:
|
|
init_completion(&dispc.frame_done);
|
|
omap_dispc_enable_lcd_out(0);
|
|
if (!wait_for_completion_timeout(&dispc.frame_done,
|
|
msecs_to_jiffies(500))) {
|
|
dev_err(dispc.fbdev->dev,
|
|
"timeout waiting for FRAME DONE\n");
|
|
}
|
|
dispc.update_mode = mode;
|
|
enable_lcd_clocks(0);
|
|
break;
|
|
default:
|
|
r = -EINVAL;
|
|
}
|
|
}
|
|
|
|
return r;
|
|
}
|
|
|
|
static void omap_dispc_get_caps(int plane, struct omapfb_caps *caps)
|
|
{
|
|
caps->ctrl |= OMAPFB_CAPS_PLANE_RELOCATE_MEM;
|
|
if (plane > 0)
|
|
caps->ctrl |= OMAPFB_CAPS_PLANE_SCALE;
|
|
caps->plane_color |= (1 << OMAPFB_COLOR_RGB565) |
|
|
(1 << OMAPFB_COLOR_YUV422) |
|
|
(1 << OMAPFB_COLOR_YUY422);
|
|
if (plane == 0)
|
|
caps->plane_color |= (1 << OMAPFB_COLOR_CLUT_8BPP) |
|
|
(1 << OMAPFB_COLOR_CLUT_4BPP) |
|
|
(1 << OMAPFB_COLOR_CLUT_2BPP) |
|
|
(1 << OMAPFB_COLOR_CLUT_1BPP) |
|
|
(1 << OMAPFB_COLOR_RGB444);
|
|
}
|
|
|
|
static enum omapfb_update_mode omap_dispc_get_update_mode(void)
|
|
{
|
|
return dispc.update_mode;
|
|
}
|
|
|
|
static void setup_color_conv_coef(void)
|
|
{
|
|
u32 mask = FLD_MASK(16, 11) | FLD_MASK(0, 11);
|
|
int cf1_reg = DISPC_VID1_BASE + DISPC_VID_CONV_COEF0;
|
|
int cf2_reg = DISPC_VID2_BASE + DISPC_VID_CONV_COEF0;
|
|
int at1_reg = DISPC_VID1_BASE + DISPC_VID_ATTRIBUTES;
|
|
int at2_reg = DISPC_VID2_BASE + DISPC_VID_ATTRIBUTES;
|
|
const struct color_conv_coef {
|
|
int ry, rcr, rcb, gy, gcr, gcb, by, bcr, bcb;
|
|
int full_range;
|
|
} ctbl_bt601_5 = {
|
|
298, 409, 0, 298, -208, -100, 298, 0, 517, 0,
|
|
};
|
|
const struct color_conv_coef *ct;
|
|
#define CVAL(x, y) (((x & 2047) << 16) | (y & 2047))
|
|
|
|
ct = &ctbl_bt601_5;
|
|
|
|
MOD_REG_FLD(cf1_reg, mask, CVAL(ct->rcr, ct->ry));
|
|
MOD_REG_FLD(cf1_reg + 4, mask, CVAL(ct->gy, ct->rcb));
|
|
MOD_REG_FLD(cf1_reg + 8, mask, CVAL(ct->gcb, ct->gcr));
|
|
MOD_REG_FLD(cf1_reg + 12, mask, CVAL(ct->bcr, ct->by));
|
|
MOD_REG_FLD(cf1_reg + 16, mask, CVAL(0, ct->bcb));
|
|
|
|
MOD_REG_FLD(cf2_reg, mask, CVAL(ct->rcr, ct->ry));
|
|
MOD_REG_FLD(cf2_reg + 4, mask, CVAL(ct->gy, ct->rcb));
|
|
MOD_REG_FLD(cf2_reg + 8, mask, CVAL(ct->gcb, ct->gcr));
|
|
MOD_REG_FLD(cf2_reg + 12, mask, CVAL(ct->bcr, ct->by));
|
|
MOD_REG_FLD(cf2_reg + 16, mask, CVAL(0, ct->bcb));
|
|
#undef CVAL
|
|
|
|
MOD_REG_FLD(at1_reg, (1 << 11), ct->full_range);
|
|
MOD_REG_FLD(at2_reg, (1 << 11), ct->full_range);
|
|
}
|
|
|
|
static void calc_ck_div(int is_tft, int pck, int *lck_div, int *pck_div)
|
|
{
|
|
unsigned long fck, lck;
|
|
|
|
*lck_div = 1;
|
|
pck = max(1, pck);
|
|
fck = clk_get_rate(dispc.dss1_fck);
|
|
lck = fck;
|
|
*pck_div = (lck + pck - 1) / pck;
|
|
if (is_tft)
|
|
*pck_div = max(2, *pck_div);
|
|
else
|
|
*pck_div = max(3, *pck_div);
|
|
if (*pck_div > 255) {
|
|
*pck_div = 255;
|
|
lck = pck * *pck_div;
|
|
*lck_div = fck / lck;
|
|
BUG_ON(*lck_div < 1);
|
|
if (*lck_div > 255) {
|
|
*lck_div = 255;
|
|
dev_warn(dispc.fbdev->dev, "pixclock %d kHz too low.\n",
|
|
pck / 1000);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void set_lcd_tft_mode(int enable)
|
|
{
|
|
u32 mask;
|
|
|
|
mask = 1 << 3;
|
|
MOD_REG_FLD(DISPC_CONTROL, mask, enable ? mask : 0);
|
|
}
|
|
|
|
static void set_lcd_timings(void)
|
|
{
|
|
u32 l;
|
|
int lck_div, pck_div;
|
|
struct lcd_panel *panel = dispc.fbdev->panel;
|
|
int is_tft = panel->config & OMAP_LCDC_PANEL_TFT;
|
|
unsigned long fck;
|
|
|
|
l = dispc_read_reg(DISPC_TIMING_H);
|
|
l &= ~(FLD_MASK(0, 6) | FLD_MASK(8, 8) | FLD_MASK(20, 8));
|
|
l |= ( max(1, (min(64, panel->hsw))) - 1 ) << 0;
|
|
l |= ( max(1, (min(256, panel->hfp))) - 1 ) << 8;
|
|
l |= ( max(1, (min(256, panel->hbp))) - 1 ) << 20;
|
|
dispc_write_reg(DISPC_TIMING_H, l);
|
|
|
|
l = dispc_read_reg(DISPC_TIMING_V);
|
|
l &= ~(FLD_MASK(0, 6) | FLD_MASK(8, 8) | FLD_MASK(20, 8));
|
|
l |= ( max(1, (min(64, panel->vsw))) - 1 ) << 0;
|
|
l |= ( max(0, (min(255, panel->vfp))) - 0 ) << 8;
|
|
l |= ( max(0, (min(255, panel->vbp))) - 0 ) << 20;
|
|
dispc_write_reg(DISPC_TIMING_V, l);
|
|
|
|
l = dispc_read_reg(DISPC_POL_FREQ);
|
|
l &= ~FLD_MASK(12, 6);
|
|
l |= (panel->config & OMAP_LCDC_SIGNAL_MASK) << 12;
|
|
l |= panel->acb & 0xff;
|
|
dispc_write_reg(DISPC_POL_FREQ, l);
|
|
|
|
calc_ck_div(is_tft, panel->pixel_clock * 1000, &lck_div, &pck_div);
|
|
|
|
l = dispc_read_reg(DISPC_DIVISOR);
|
|
l &= ~(FLD_MASK(16, 8) | FLD_MASK(0, 8));
|
|
l |= (lck_div << 16) | (pck_div << 0);
|
|
dispc_write_reg(DISPC_DIVISOR, l);
|
|
|
|
/* update panel info with the exact clock */
|
|
fck = clk_get_rate(dispc.dss1_fck);
|
|
panel->pixel_clock = fck / lck_div / pck_div / 1000;
|
|
}
|
|
|
|
static void recalc_irq_mask(void)
|
|
{
|
|
int i;
|
|
unsigned long irq_mask = DISPC_IRQ_MASK_ERROR;
|
|
|
|
for (i = 0; i < MAX_IRQ_HANDLERS; i++) {
|
|
if (!dispc.irq_handlers[i].callback)
|
|
continue;
|
|
|
|
irq_mask |= dispc.irq_handlers[i].irq_mask;
|
|
}
|
|
|
|
enable_lcd_clocks(1);
|
|
MOD_REG_FLD(DISPC_IRQENABLE, 0x7fff, irq_mask);
|
|
enable_lcd_clocks(0);
|
|
}
|
|
|
|
int omap_dispc_request_irq(unsigned long irq_mask, void (*callback)(void *data),
|
|
void *data)
|
|
{
|
|
int i;
|
|
|
|
BUG_ON(callback == NULL);
|
|
|
|
for (i = 0; i < MAX_IRQ_HANDLERS; i++) {
|
|
if (dispc.irq_handlers[i].callback)
|
|
continue;
|
|
|
|
dispc.irq_handlers[i].irq_mask = irq_mask;
|
|
dispc.irq_handlers[i].callback = callback;
|
|
dispc.irq_handlers[i].data = data;
|
|
recalc_irq_mask();
|
|
|
|
return 0;
|
|
}
|
|
|
|
return -EBUSY;
|
|
}
|
|
EXPORT_SYMBOL(omap_dispc_request_irq);
|
|
|
|
void omap_dispc_free_irq(unsigned long irq_mask, void (*callback)(void *data),
|
|
void *data)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < MAX_IRQ_HANDLERS; i++) {
|
|
if (dispc.irq_handlers[i].callback == callback &&
|
|
dispc.irq_handlers[i].data == data) {
|
|
dispc.irq_handlers[i].irq_mask = 0;
|
|
dispc.irq_handlers[i].callback = NULL;
|
|
dispc.irq_handlers[i].data = NULL;
|
|
recalc_irq_mask();
|
|
return;
|
|
}
|
|
}
|
|
|
|
BUG();
|
|
}
|
|
EXPORT_SYMBOL(omap_dispc_free_irq);
|
|
|
|
static irqreturn_t omap_dispc_irq_handler(int irq, void *dev)
|
|
{
|
|
u32 stat;
|
|
int i = 0;
|
|
|
|
enable_lcd_clocks(1);
|
|
|
|
stat = dispc_read_reg(DISPC_IRQSTATUS);
|
|
if (stat & DISPC_IRQ_FRAMEMASK)
|
|
complete(&dispc.frame_done);
|
|
|
|
if (stat & DISPC_IRQ_MASK_ERROR) {
|
|
if (printk_ratelimit()) {
|
|
dev_err(dispc.fbdev->dev, "irq error status %04x\n",
|
|
stat & 0x7fff);
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < MAX_IRQ_HANDLERS; i++) {
|
|
if (unlikely(dispc.irq_handlers[i].callback &&
|
|
(stat & dispc.irq_handlers[i].irq_mask)))
|
|
dispc.irq_handlers[i].callback(
|
|
dispc.irq_handlers[i].data);
|
|
}
|
|
|
|
dispc_write_reg(DISPC_IRQSTATUS, stat);
|
|
|
|
enable_lcd_clocks(0);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int get_dss_clocks(void)
|
|
{
|
|
dispc.dss_ick = clk_get(&dispc.fbdev->dssdev->dev, "ick");
|
|
if (IS_ERR(dispc.dss_ick)) {
|
|
dev_err(dispc.fbdev->dev, "can't get ick\n");
|
|
return PTR_ERR(dispc.dss_ick);
|
|
}
|
|
|
|
dispc.dss1_fck = clk_get(&dispc.fbdev->dssdev->dev, "fck");
|
|
if (IS_ERR(dispc.dss1_fck)) {
|
|
dev_err(dispc.fbdev->dev, "can't get dss1_fck\n");
|
|
clk_put(dispc.dss_ick);
|
|
return PTR_ERR(dispc.dss1_fck);
|
|
}
|
|
|
|
dispc.dss_54m_fck = clk_get(&dispc.fbdev->dssdev->dev, "tv_clk");
|
|
if (IS_ERR(dispc.dss_54m_fck)) {
|
|
dev_err(dispc.fbdev->dev, "can't get tv_fck\n");
|
|
clk_put(dispc.dss_ick);
|
|
clk_put(dispc.dss1_fck);
|
|
return PTR_ERR(dispc.dss_54m_fck);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void put_dss_clocks(void)
|
|
{
|
|
clk_put(dispc.dss_54m_fck);
|
|
clk_put(dispc.dss1_fck);
|
|
clk_put(dispc.dss_ick);
|
|
}
|
|
|
|
static void enable_lcd_clocks(int enable)
|
|
{
|
|
if (enable) {
|
|
clk_enable(dispc.dss_ick);
|
|
clk_enable(dispc.dss1_fck);
|
|
} else {
|
|
clk_disable(dispc.dss1_fck);
|
|
clk_disable(dispc.dss_ick);
|
|
}
|
|
}
|
|
|
|
static void enable_digit_clocks(int enable)
|
|
{
|
|
if (enable)
|
|
clk_enable(dispc.dss_54m_fck);
|
|
else
|
|
clk_disable(dispc.dss_54m_fck);
|
|
}
|
|
|
|
static void omap_dispc_suspend(void)
|
|
{
|
|
if (dispc.update_mode == OMAPFB_AUTO_UPDATE) {
|
|
init_completion(&dispc.frame_done);
|
|
omap_dispc_enable_lcd_out(0);
|
|
if (!wait_for_completion_timeout(&dispc.frame_done,
|
|
msecs_to_jiffies(500))) {
|
|
dev_err(dispc.fbdev->dev,
|
|
"timeout waiting for FRAME DONE\n");
|
|
}
|
|
enable_lcd_clocks(0);
|
|
}
|
|
}
|
|
|
|
static void omap_dispc_resume(void)
|
|
{
|
|
if (dispc.update_mode == OMAPFB_AUTO_UPDATE) {
|
|
enable_lcd_clocks(1);
|
|
if (!dispc.ext_mode) {
|
|
set_lcd_timings();
|
|
load_palette();
|
|
}
|
|
omap_dispc_enable_lcd_out(1);
|
|
}
|
|
}
|
|
|
|
|
|
static int omap_dispc_update_window(struct fb_info *fbi,
|
|
struct omapfb_update_window *win,
|
|
void (*complete_callback)(void *arg),
|
|
void *complete_callback_data)
|
|
{
|
|
return dispc.update_mode == OMAPFB_UPDATE_DISABLED ? -ENODEV : 0;
|
|
}
|
|
|
|
static int mmap_kern(struct omapfb_mem_region *region)
|
|
{
|
|
struct vm_struct *kvma;
|
|
struct vm_area_struct vma;
|
|
pgprot_t pgprot;
|
|
unsigned long vaddr;
|
|
|
|
kvma = get_vm_area(region->size, VM_IOREMAP);
|
|
if (kvma == NULL) {
|
|
dev_err(dispc.fbdev->dev, "can't get kernel vm area\n");
|
|
return -ENOMEM;
|
|
}
|
|
vma.vm_mm = &init_mm;
|
|
|
|
vaddr = (unsigned long)kvma->addr;
|
|
|
|
pgprot = pgprot_writecombine(pgprot_kernel);
|
|
vma.vm_start = vaddr;
|
|
vma.vm_end = vaddr + region->size;
|
|
if (io_remap_pfn_range(&vma, vaddr, region->paddr >> PAGE_SHIFT,
|
|
region->size, pgprot) < 0) {
|
|
dev_err(dispc.fbdev->dev, "kernel mmap for FBMEM failed\n");
|
|
return -EAGAIN;
|
|
}
|
|
region->vaddr = (void *)vaddr;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mmap_user_open(struct vm_area_struct *vma)
|
|
{
|
|
int plane = (int)vma->vm_private_data;
|
|
|
|
atomic_inc(&dispc.map_count[plane]);
|
|
}
|
|
|
|
static void mmap_user_close(struct vm_area_struct *vma)
|
|
{
|
|
int plane = (int)vma->vm_private_data;
|
|
|
|
atomic_dec(&dispc.map_count[plane]);
|
|
}
|
|
|
|
static const struct vm_operations_struct mmap_user_ops = {
|
|
.open = mmap_user_open,
|
|
.close = mmap_user_close,
|
|
};
|
|
|
|
static int omap_dispc_mmap_user(struct fb_info *info,
|
|
struct vm_area_struct *vma)
|
|
{
|
|
struct omapfb_plane_struct *plane = info->par;
|
|
unsigned long off;
|
|
unsigned long start;
|
|
u32 len;
|
|
|
|
if (vma->vm_end - vma->vm_start == 0)
|
|
return 0;
|
|
if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
|
|
return -EINVAL;
|
|
off = vma->vm_pgoff << PAGE_SHIFT;
|
|
|
|
start = info->fix.smem_start;
|
|
len = info->fix.smem_len;
|
|
if (off >= len)
|
|
return -EINVAL;
|
|
if ((vma->vm_end - vma->vm_start + off) > len)
|
|
return -EINVAL;
|
|
off += start;
|
|
vma->vm_pgoff = off >> PAGE_SHIFT;
|
|
vma->vm_flags |= VM_IO | VM_RESERVED;
|
|
vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
|
|
vma->vm_ops = &mmap_user_ops;
|
|
vma->vm_private_data = (void *)plane->idx;
|
|
if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
|
|
vma->vm_end - vma->vm_start, vma->vm_page_prot))
|
|
return -EAGAIN;
|
|
/* vm_ops.open won't be called for mmap itself. */
|
|
atomic_inc(&dispc.map_count[plane->idx]);
|
|
return 0;
|
|
}
|
|
|
|
static void unmap_kern(struct omapfb_mem_region *region)
|
|
{
|
|
vunmap(region->vaddr);
|
|
}
|
|
|
|
static int alloc_palette_ram(void)
|
|
{
|
|
dispc.palette_vaddr = dma_alloc_writecombine(dispc.fbdev->dev,
|
|
MAX_PALETTE_SIZE, &dispc.palette_paddr, GFP_KERNEL);
|
|
if (dispc.palette_vaddr == NULL) {
|
|
dev_err(dispc.fbdev->dev, "failed to alloc palette memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void free_palette_ram(void)
|
|
{
|
|
dma_free_writecombine(dispc.fbdev->dev, MAX_PALETTE_SIZE,
|
|
dispc.palette_vaddr, dispc.palette_paddr);
|
|
}
|
|
|
|
static int alloc_fbmem(struct omapfb_mem_region *region)
|
|
{
|
|
region->vaddr = dma_alloc_writecombine(dispc.fbdev->dev,
|
|
region->size, ®ion->paddr, GFP_KERNEL);
|
|
|
|
if (region->vaddr == NULL) {
|
|
dev_err(dispc.fbdev->dev, "unable to allocate FB DMA memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void free_fbmem(struct omapfb_mem_region *region)
|
|
{
|
|
dma_free_writecombine(dispc.fbdev->dev, region->size,
|
|
region->vaddr, region->paddr);
|
|
}
|
|
|
|
static struct resmap *init_resmap(unsigned long start, size_t size)
|
|
{
|
|
unsigned page_cnt;
|
|
struct resmap *res_map;
|
|
|
|
page_cnt = PAGE_ALIGN(size) / PAGE_SIZE;
|
|
res_map =
|
|
kzalloc(sizeof(struct resmap) + RESMAP_SIZE(page_cnt), GFP_KERNEL);
|
|
if (res_map == NULL)
|
|
return NULL;
|
|
res_map->start = start;
|
|
res_map->page_cnt = page_cnt;
|
|
res_map->map = (unsigned long *)(res_map + 1);
|
|
return res_map;
|
|
}
|
|
|
|
static void cleanup_resmap(struct resmap *res_map)
|
|
{
|
|
kfree(res_map);
|
|
}
|
|
|
|
static inline int resmap_mem_type(unsigned long start)
|
|
{
|
|
if (start >= OMAP2_SRAM_START &&
|
|
start < OMAP2_SRAM_START + OMAP2_SRAM_SIZE)
|
|
return OMAPFB_MEMTYPE_SRAM;
|
|
else
|
|
return OMAPFB_MEMTYPE_SDRAM;
|
|
}
|
|
|
|
static inline int resmap_page_reserved(struct resmap *res_map, unsigned page_nr)
|
|
{
|
|
return *RESMAP_PTR(res_map, page_nr) & RESMAP_MASK(page_nr) ? 1 : 0;
|
|
}
|
|
|
|
static inline void resmap_reserve_page(struct resmap *res_map, unsigned page_nr)
|
|
{
|
|
BUG_ON(resmap_page_reserved(res_map, page_nr));
|
|
*RESMAP_PTR(res_map, page_nr) |= RESMAP_MASK(page_nr);
|
|
}
|
|
|
|
static inline void resmap_free_page(struct resmap *res_map, unsigned page_nr)
|
|
{
|
|
BUG_ON(!resmap_page_reserved(res_map, page_nr));
|
|
*RESMAP_PTR(res_map, page_nr) &= ~RESMAP_MASK(page_nr);
|
|
}
|
|
|
|
static void resmap_reserve_region(unsigned long start, size_t size)
|
|
{
|
|
|
|
struct resmap *res_map;
|
|
unsigned start_page;
|
|
unsigned end_page;
|
|
int mtype;
|
|
unsigned i;
|
|
|
|
mtype = resmap_mem_type(start);
|
|
res_map = dispc.res_map[mtype];
|
|
dev_dbg(dispc.fbdev->dev, "reserve mem type %d start %08lx size %d\n",
|
|
mtype, start, size);
|
|
start_page = (start - res_map->start) / PAGE_SIZE;
|
|
end_page = start_page + PAGE_ALIGN(size) / PAGE_SIZE;
|
|
for (i = start_page; i < end_page; i++)
|
|
resmap_reserve_page(res_map, i);
|
|
}
|
|
|
|
static void resmap_free_region(unsigned long start, size_t size)
|
|
{
|
|
struct resmap *res_map;
|
|
unsigned start_page;
|
|
unsigned end_page;
|
|
unsigned i;
|
|
int mtype;
|
|
|
|
mtype = resmap_mem_type(start);
|
|
res_map = dispc.res_map[mtype];
|
|
dev_dbg(dispc.fbdev->dev, "free mem type %d start %08lx size %d\n",
|
|
mtype, start, size);
|
|
start_page = (start - res_map->start) / PAGE_SIZE;
|
|
end_page = start_page + PAGE_ALIGN(size) / PAGE_SIZE;
|
|
for (i = start_page; i < end_page; i++)
|
|
resmap_free_page(res_map, i);
|
|
}
|
|
|
|
static unsigned long resmap_alloc_region(int mtype, size_t size)
|
|
{
|
|
unsigned i;
|
|
unsigned total;
|
|
unsigned start_page;
|
|
unsigned long start;
|
|
struct resmap *res_map = dispc.res_map[mtype];
|
|
|
|
BUG_ON(mtype >= DISPC_MEMTYPE_NUM || res_map == NULL || !size);
|
|
|
|
size = PAGE_ALIGN(size) / PAGE_SIZE;
|
|
start_page = 0;
|
|
total = 0;
|
|
for (i = 0; i < res_map->page_cnt; i++) {
|
|
if (resmap_page_reserved(res_map, i)) {
|
|
start_page = i + 1;
|
|
total = 0;
|
|
} else if (++total == size)
|
|
break;
|
|
}
|
|
if (total < size)
|
|
return 0;
|
|
|
|
start = res_map->start + start_page * PAGE_SIZE;
|
|
resmap_reserve_region(start, size * PAGE_SIZE);
|
|
|
|
return start;
|
|
}
|
|
|
|
/* Note that this will only work for user mappings, we don't deal with
|
|
* kernel mappings here, so fbcon will keep using the old region.
|
|
*/
|
|
static int omap_dispc_setup_mem(int plane, size_t size, int mem_type,
|
|
unsigned long *paddr)
|
|
{
|
|
struct omapfb_mem_region *rg;
|
|
unsigned long new_addr = 0;
|
|
|
|
if ((unsigned)plane > dispc.mem_desc.region_cnt)
|
|
return -EINVAL;
|
|
if (mem_type >= DISPC_MEMTYPE_NUM)
|
|
return -EINVAL;
|
|
if (dispc.res_map[mem_type] == NULL)
|
|
return -ENOMEM;
|
|
rg = &dispc.mem_desc.region[plane];
|
|
if (size == rg->size && mem_type == rg->type)
|
|
return 0;
|
|
if (atomic_read(&dispc.map_count[plane]))
|
|
return -EBUSY;
|
|
if (rg->size != 0)
|
|
resmap_free_region(rg->paddr, rg->size);
|
|
if (size != 0) {
|
|
new_addr = resmap_alloc_region(mem_type, size);
|
|
if (!new_addr) {
|
|
/* Reallocate old region. */
|
|
resmap_reserve_region(rg->paddr, rg->size);
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
rg->paddr = new_addr;
|
|
rg->size = size;
|
|
rg->type = mem_type;
|
|
|
|
*paddr = new_addr;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int setup_fbmem(struct omapfb_mem_desc *req_md)
|
|
{
|
|
struct omapfb_mem_region *rg;
|
|
int i;
|
|
int r;
|
|
unsigned long mem_start[DISPC_MEMTYPE_NUM];
|
|
unsigned long mem_end[DISPC_MEMTYPE_NUM];
|
|
|
|
if (!req_md->region_cnt) {
|
|
dev_err(dispc.fbdev->dev, "no memory regions defined\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
rg = &req_md->region[0];
|
|
memset(mem_start, 0xff, sizeof(mem_start));
|
|
memset(mem_end, 0, sizeof(mem_end));
|
|
|
|
for (i = 0; i < req_md->region_cnt; i++, rg++) {
|
|
int mtype;
|
|
if (rg->paddr) {
|
|
rg->alloc = 0;
|
|
if (rg->vaddr == NULL) {
|
|
rg->map = 1;
|
|
if ((r = mmap_kern(rg)) < 0)
|
|
return r;
|
|
}
|
|
} else {
|
|
if (rg->type != OMAPFB_MEMTYPE_SDRAM) {
|
|
dev_err(dispc.fbdev->dev,
|
|
"unsupported memory type\n");
|
|
return -EINVAL;
|
|
}
|
|
rg->alloc = rg->map = 1;
|
|
if ((r = alloc_fbmem(rg)) < 0)
|
|
return r;
|
|
}
|
|
mtype = rg->type;
|
|
|
|
if (rg->paddr < mem_start[mtype])
|
|
mem_start[mtype] = rg->paddr;
|
|
if (rg->paddr + rg->size > mem_end[mtype])
|
|
mem_end[mtype] = rg->paddr + rg->size;
|
|
}
|
|
|
|
for (i = 0; i < DISPC_MEMTYPE_NUM; i++) {
|
|
unsigned long start;
|
|
size_t size;
|
|
if (mem_end[i] == 0)
|
|
continue;
|
|
start = mem_start[i];
|
|
size = mem_end[i] - start;
|
|
dispc.res_map[i] = init_resmap(start, size);
|
|
r = -ENOMEM;
|
|
if (dispc.res_map[i] == NULL)
|
|
goto fail;
|
|
/* Initial state is that everything is reserved. This
|
|
* includes possible holes as well, which will never be
|
|
* freed.
|
|
*/
|
|
resmap_reserve_region(start, size);
|
|
}
|
|
|
|
dispc.mem_desc = *req_md;
|
|
|
|
return 0;
|
|
fail:
|
|
for (i = 0; i < DISPC_MEMTYPE_NUM; i++) {
|
|
if (dispc.res_map[i] != NULL)
|
|
cleanup_resmap(dispc.res_map[i]);
|
|
}
|
|
return r;
|
|
}
|
|
|
|
static void cleanup_fbmem(void)
|
|
{
|
|
struct omapfb_mem_region *rg;
|
|
int i;
|
|
|
|
for (i = 0; i < DISPC_MEMTYPE_NUM; i++) {
|
|
if (dispc.res_map[i] != NULL)
|
|
cleanup_resmap(dispc.res_map[i]);
|
|
}
|
|
rg = &dispc.mem_desc.region[0];
|
|
for (i = 0; i < dispc.mem_desc.region_cnt; i++, rg++) {
|
|
if (rg->alloc)
|
|
free_fbmem(rg);
|
|
else {
|
|
if (rg->map)
|
|
unmap_kern(rg);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode,
|
|
struct omapfb_mem_desc *req_vram)
|
|
{
|
|
int r;
|
|
u32 l;
|
|
struct lcd_panel *panel = fbdev->panel;
|
|
void __iomem *ram_fw_base;
|
|
int tmo = 10000;
|
|
int skip_init = 0;
|
|
int i;
|
|
|
|
memset(&dispc, 0, sizeof(dispc));
|
|
|
|
dispc.base = ioremap(DISPC_BASE, SZ_1K);
|
|
if (!dispc.base) {
|
|
dev_err(fbdev->dev, "can't ioremap DISPC\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dispc.fbdev = fbdev;
|
|
dispc.ext_mode = ext_mode;
|
|
|
|
init_completion(&dispc.frame_done);
|
|
|
|
if ((r = get_dss_clocks()) < 0)
|
|
goto fail0;
|
|
|
|
enable_lcd_clocks(1);
|
|
|
|
#ifdef CONFIG_FB_OMAP_BOOTLOADER_INIT
|
|
l = dispc_read_reg(DISPC_CONTROL);
|
|
/* LCD enabled ? */
|
|
if (l & 1) {
|
|
pr_info("omapfb: skipping hardware initialization\n");
|
|
skip_init = 1;
|
|
}
|
|
#endif
|
|
|
|
if (!skip_init) {
|
|
/* Reset monitoring works only w/ the 54M clk */
|
|
enable_digit_clocks(1);
|
|
|
|
/* Soft reset */
|
|
MOD_REG_FLD(DISPC_SYSCONFIG, 1 << 1, 1 << 1);
|
|
|
|
while (!(dispc_read_reg(DISPC_SYSSTATUS) & 1)) {
|
|
if (!--tmo) {
|
|
dev_err(dispc.fbdev->dev, "soft reset failed\n");
|
|
r = -ENODEV;
|
|
enable_digit_clocks(0);
|
|
goto fail1;
|
|
}
|
|
}
|
|
|
|
enable_digit_clocks(0);
|
|
}
|
|
|
|
/* Enable smart standby/idle, autoidle and wakeup */
|
|
l = dispc_read_reg(DISPC_SYSCONFIG);
|
|
l &= ~((3 << 12) | (3 << 3));
|
|
l |= (2 << 12) | (2 << 3) | (1 << 2) | (1 << 0);
|
|
dispc_write_reg(DISPC_SYSCONFIG, l);
|
|
omap_writel(1 << 0, DSS_BASE + DSS_SYSCONFIG);
|
|
|
|
/* Set functional clock autogating */
|
|
l = dispc_read_reg(DISPC_CONFIG);
|
|
l |= 1 << 9;
|
|
dispc_write_reg(DISPC_CONFIG, l);
|
|
|
|
l = dispc_read_reg(DISPC_IRQSTATUS);
|
|
dispc_write_reg(DISPC_IRQSTATUS, l);
|
|
|
|
recalc_irq_mask();
|
|
|
|
if ((r = request_irq(INT_24XX_DSS_IRQ, omap_dispc_irq_handler,
|
|
0, MODULE_NAME, fbdev)) < 0) {
|
|
dev_err(dispc.fbdev->dev, "can't get DSS IRQ\n");
|
|
goto fail1;
|
|
}
|
|
|
|
/* L3 firewall setting: enable access to OCM RAM */
|
|
ram_fw_base = ioremap(0x68005000, SZ_1K);
|
|
if (!ram_fw_base) {
|
|
dev_err(dispc.fbdev->dev, "Cannot ioremap to enable OCM RAM\n");
|
|
goto fail1;
|
|
}
|
|
__raw_writel(0x402000b0, ram_fw_base + 0xa0);
|
|
iounmap(ram_fw_base);
|
|
|
|
if ((r = alloc_palette_ram()) < 0)
|
|
goto fail2;
|
|
|
|
if ((r = setup_fbmem(req_vram)) < 0)
|
|
goto fail3;
|
|
|
|
if (!skip_init) {
|
|
for (i = 0; i < dispc.mem_desc.region_cnt; i++) {
|
|
memset(dispc.mem_desc.region[i].vaddr, 0,
|
|
dispc.mem_desc.region[i].size);
|
|
}
|
|
|
|
/* Set logic clock to fck, pixel clock to fck/2 for now */
|
|
MOD_REG_FLD(DISPC_DIVISOR, FLD_MASK(16, 8), 1 << 16);
|
|
MOD_REG_FLD(DISPC_DIVISOR, FLD_MASK(0, 8), 2 << 0);
|
|
|
|
setup_plane_fifo(0, ext_mode);
|
|
setup_plane_fifo(1, ext_mode);
|
|
setup_plane_fifo(2, ext_mode);
|
|
|
|
setup_color_conv_coef();
|
|
|
|
set_lcd_tft_mode(panel->config & OMAP_LCDC_PANEL_TFT);
|
|
set_load_mode(DISPC_LOAD_FRAME_ONLY);
|
|
|
|
if (!ext_mode) {
|
|
set_lcd_data_lines(panel->data_lines);
|
|
omap_dispc_set_lcd_size(panel->x_res, panel->y_res);
|
|
set_lcd_timings();
|
|
} else
|
|
set_lcd_data_lines(panel->bpp);
|
|
enable_rfbi_mode(ext_mode);
|
|
}
|
|
|
|
l = dispc_read_reg(DISPC_REVISION);
|
|
pr_info("omapfb: DISPC version %d.%d initialized\n",
|
|
l >> 4 & 0x0f, l & 0x0f);
|
|
enable_lcd_clocks(0);
|
|
|
|
return 0;
|
|
fail3:
|
|
free_palette_ram();
|
|
fail2:
|
|
free_irq(INT_24XX_DSS_IRQ, fbdev);
|
|
fail1:
|
|
enable_lcd_clocks(0);
|
|
put_dss_clocks();
|
|
fail0:
|
|
iounmap(dispc.base);
|
|
return r;
|
|
}
|
|
|
|
static void omap_dispc_cleanup(void)
|
|
{
|
|
int i;
|
|
|
|
omap_dispc_set_update_mode(OMAPFB_UPDATE_DISABLED);
|
|
/* This will also disable clocks that are on */
|
|
for (i = 0; i < dispc.mem_desc.region_cnt; i++)
|
|
omap_dispc_enable_plane(i, 0);
|
|
cleanup_fbmem();
|
|
free_palette_ram();
|
|
free_irq(INT_24XX_DSS_IRQ, dispc.fbdev);
|
|
put_dss_clocks();
|
|
iounmap(dispc.base);
|
|
}
|
|
|
|
const struct lcd_ctrl omap2_int_ctrl = {
|
|
.name = "internal",
|
|
.init = omap_dispc_init,
|
|
.cleanup = omap_dispc_cleanup,
|
|
.get_caps = omap_dispc_get_caps,
|
|
.set_update_mode = omap_dispc_set_update_mode,
|
|
.get_update_mode = omap_dispc_get_update_mode,
|
|
.update_window = omap_dispc_update_window,
|
|
.suspend = omap_dispc_suspend,
|
|
.resume = omap_dispc_resume,
|
|
.setup_plane = omap_dispc_setup_plane,
|
|
.setup_mem = omap_dispc_setup_mem,
|
|
.set_scale = omap_dispc_set_scale,
|
|
.enable_plane = omap_dispc_enable_plane,
|
|
.set_color_key = omap_dispc_set_color_key,
|
|
.get_color_key = omap_dispc_get_color_key,
|
|
.mmap = omap_dispc_mmap_user,
|
|
};
|