495 lines
14 KiB
C
495 lines
14 KiB
C
/*
|
|
* linux/arch/arm/mach-pxa/cpufreq-pxa2xx.c
|
|
*
|
|
* Copyright (C) 2002,2003 Intrinsyc Software
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
* History:
|
|
* 31-Jul-2002 : Initial version [FB]
|
|
* 29-Jan-2003 : added PXA255 support [FB]
|
|
* 20-Apr-2003 : ported to v2.5 (Dustin McIntire, Sensoria Corp.)
|
|
*
|
|
* Note:
|
|
* This driver may change the memory bus clock rate, but will not do any
|
|
* platform specific access timing changes... for example if you have flash
|
|
* memory connected to CS0, you will need to register a platform specific
|
|
* notifier which will adjust the memory access strobes to maintain a
|
|
* minimum strobe width.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/init.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/err.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <mach/pxa2xx-regs.h>
|
|
#include <mach/smemc.h>
|
|
|
|
#ifdef DEBUG
|
|
static unsigned int freq_debug;
|
|
module_param(freq_debug, uint, 0);
|
|
MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
|
|
#else
|
|
#define freq_debug 0
|
|
#endif
|
|
|
|
static struct regulator *vcc_core;
|
|
|
|
static unsigned int pxa27x_maxfreq;
|
|
module_param(pxa27x_maxfreq, uint, 0);
|
|
MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz"
|
|
"(typically 624=>pxa270, 416=>pxa271, 520=>pxa272)");
|
|
|
|
typedef struct {
|
|
unsigned int khz;
|
|
unsigned int membus;
|
|
unsigned int cccr;
|
|
unsigned int div2;
|
|
unsigned int cclkcfg;
|
|
int vmin;
|
|
int vmax;
|
|
} pxa_freqs_t;
|
|
|
|
/* Define the refresh period in mSec for the SDRAM and the number of rows */
|
|
#define SDRAM_TREF 64 /* standard 64ms SDRAM */
|
|
static unsigned int sdram_rows;
|
|
|
|
#define CCLKCFG_TURBO 0x1
|
|
#define CCLKCFG_FCS 0x2
|
|
#define CCLKCFG_HALFTURBO 0x4
|
|
#define CCLKCFG_FASTBUS 0x8
|
|
#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2)
|
|
#define MDREFR_DRI_MASK 0xFFF
|
|
|
|
#define MDCNFG_DRAC2(mdcnfg) (((mdcnfg) >> 21) & 0x3)
|
|
#define MDCNFG_DRAC0(mdcnfg) (((mdcnfg) >> 5) & 0x3)
|
|
|
|
/*
|
|
* PXA255 definitions
|
|
*/
|
|
/* Use the run mode frequencies for the CPUFREQ_POLICY_PERFORMANCE policy */
|
|
#define CCLKCFG CCLKCFG_TURBO | CCLKCFG_FCS
|
|
|
|
static pxa_freqs_t pxa255_run_freqs[] =
|
|
{
|
|
/* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */
|
|
{ 99500, 99500, 0x121, 1, CCLKCFG, -1, -1}, /* 99, 99, 50, 50 */
|
|
{132700, 132700, 0x123, 1, CCLKCFG, -1, -1}, /* 133, 133, 66, 66 */
|
|
{199100, 99500, 0x141, 0, CCLKCFG, -1, -1}, /* 199, 199, 99, 99 */
|
|
{265400, 132700, 0x143, 1, CCLKCFG, -1, -1}, /* 265, 265, 133, 66 */
|
|
{331800, 165900, 0x145, 1, CCLKCFG, -1, -1}, /* 331, 331, 166, 83 */
|
|
{398100, 99500, 0x161, 0, CCLKCFG, -1, -1}, /* 398, 398, 196, 99 */
|
|
};
|
|
|
|
/* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
|
|
static pxa_freqs_t pxa255_turbo_freqs[] =
|
|
{
|
|
/* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */
|
|
{ 99500, 99500, 0x121, 1, CCLKCFG, -1, -1}, /* 99, 99, 50, 50 */
|
|
{199100, 99500, 0x221, 0, CCLKCFG, -1, -1}, /* 99, 199, 50, 99 */
|
|
{298500, 99500, 0x321, 0, CCLKCFG, -1, -1}, /* 99, 287, 50, 99 */
|
|
{298600, 99500, 0x1c1, 0, CCLKCFG, -1, -1}, /* 199, 287, 99, 99 */
|
|
{398100, 99500, 0x241, 0, CCLKCFG, -1, -1}, /* 199, 398, 99, 99 */
|
|
};
|
|
|
|
#define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
|
|
#define NUM_PXA25x_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs)
|
|
|
|
static struct cpufreq_frequency_table
|
|
pxa255_run_freq_table[NUM_PXA25x_RUN_FREQS+1];
|
|
static struct cpufreq_frequency_table
|
|
pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1];
|
|
|
|
static unsigned int pxa255_turbo_table;
|
|
module_param(pxa255_turbo_table, uint, 0);
|
|
MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table, !0 = turbo table)");
|
|
|
|
/*
|
|
* PXA270 definitions
|
|
*
|
|
* For the PXA27x:
|
|
* Control variables are A, L, 2N for CCCR; B, HT, T for CLKCFG.
|
|
*
|
|
* A = 0 => memory controller clock from table 3-7,
|
|
* A = 1 => memory controller clock = system bus clock
|
|
* Run mode frequency = 13 MHz * L
|
|
* Turbo mode frequency = 13 MHz * L * N
|
|
* System bus frequency = 13 MHz * L / (B + 1)
|
|
*
|
|
* In CCCR:
|
|
* A = 1
|
|
* L = 16 oscillator to run mode ratio
|
|
* 2N = 6 2 * (turbo mode to run mode ratio)
|
|
*
|
|
* In CCLKCFG:
|
|
* B = 1 Fast bus mode
|
|
* HT = 0 Half-Turbo mode
|
|
* T = 1 Turbo mode
|
|
*
|
|
* For now, just support some of the combinations in table 3-7 of
|
|
* PXA27x Processor Family Developer's Manual to simplify frequency
|
|
* change sequences.
|
|
*/
|
|
#define PXA27x_CCCR(A, L, N2) (A << 25 | N2 << 7 | L)
|
|
#define CCLKCFG2(B, HT, T) \
|
|
(CCLKCFG_FCS | \
|
|
((B) ? CCLKCFG_FASTBUS : 0) | \
|
|
((HT) ? CCLKCFG_HALFTURBO : 0) | \
|
|
((T) ? CCLKCFG_TURBO : 0))
|
|
|
|
static pxa_freqs_t pxa27x_freqs[] = {
|
|
{104000, 104000, PXA27x_CCCR(1, 8, 2), 0, CCLKCFG2(1, 0, 1), 900000, 1705000 },
|
|
{156000, 104000, PXA27x_CCCR(1, 8, 3), 0, CCLKCFG2(1, 0, 1), 1000000, 1705000 },
|
|
{208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 },
|
|
{312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 },
|
|
{416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 },
|
|
{520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1), 1450000, 1705000 },
|
|
{624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1), 1550000, 1705000 }
|
|
};
|
|
|
|
#define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs)
|
|
static struct cpufreq_frequency_table
|
|
pxa27x_freq_table[NUM_PXA27x_FREQS+1];
|
|
|
|
extern unsigned get_clk_frequency_khz(int info);
|
|
|
|
#ifdef CONFIG_REGULATOR
|
|
|
|
static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq)
|
|
{
|
|
int ret = 0;
|
|
int vmin, vmax;
|
|
|
|
if (!cpu_is_pxa27x())
|
|
return 0;
|
|
|
|
vmin = pxa_freq->vmin;
|
|
vmax = pxa_freq->vmax;
|
|
if ((vmin == -1) || (vmax == -1))
|
|
return 0;
|
|
|
|
ret = regulator_set_voltage(vcc_core, vmin, vmax);
|
|
if (ret)
|
|
pr_err("cpufreq: Failed to set vcc_core in [%dmV..%dmV]\n",
|
|
vmin, vmax);
|
|
return ret;
|
|
}
|
|
|
|
static __init void pxa_cpufreq_init_voltages(void)
|
|
{
|
|
vcc_core = regulator_get(NULL, "vcc_core");
|
|
if (IS_ERR(vcc_core)) {
|
|
pr_info("cpufreq: Didn't find vcc_core regulator\n");
|
|
vcc_core = NULL;
|
|
} else {
|
|
pr_info("cpufreq: Found vcc_core regulator\n");
|
|
}
|
|
}
|
|
#else
|
|
static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static __init void pxa_cpufreq_init_voltages(void) { }
|
|
#endif
|
|
|
|
static void find_freq_tables(struct cpufreq_frequency_table **freq_table,
|
|
pxa_freqs_t **pxa_freqs)
|
|
{
|
|
if (cpu_is_pxa25x()) {
|
|
if (!pxa255_turbo_table) {
|
|
*pxa_freqs = pxa255_run_freqs;
|
|
*freq_table = pxa255_run_freq_table;
|
|
} else {
|
|
*pxa_freqs = pxa255_turbo_freqs;
|
|
*freq_table = pxa255_turbo_freq_table;
|
|
}
|
|
}
|
|
if (cpu_is_pxa27x()) {
|
|
*pxa_freqs = pxa27x_freqs;
|
|
*freq_table = pxa27x_freq_table;
|
|
}
|
|
}
|
|
|
|
static void pxa27x_guess_max_freq(void)
|
|
{
|
|
if (!pxa27x_maxfreq) {
|
|
pxa27x_maxfreq = 416000;
|
|
printk(KERN_INFO "PXA CPU 27x max frequency not defined "
|
|
"(pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n",
|
|
pxa27x_maxfreq);
|
|
} else {
|
|
pxa27x_maxfreq *= 1000;
|
|
}
|
|
}
|
|
|
|
static void init_sdram_rows(void)
|
|
{
|
|
uint32_t mdcnfg = __raw_readl(MDCNFG);
|
|
unsigned int drac2 = 0, drac0 = 0;
|
|
|
|
if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3))
|
|
drac2 = MDCNFG_DRAC2(mdcnfg);
|
|
|
|
if (mdcnfg & (MDCNFG_DE0 | MDCNFG_DE1))
|
|
drac0 = MDCNFG_DRAC0(mdcnfg);
|
|
|
|
sdram_rows = 1 << (11 + max(drac0, drac2));
|
|
}
|
|
|
|
static u32 mdrefr_dri(unsigned int freq)
|
|
{
|
|
u32 interval = freq * SDRAM_TREF / sdram_rows;
|
|
|
|
return (interval - (cpu_is_pxa27x() ? 31 : 0)) / 32;
|
|
}
|
|
|
|
/* find a valid frequency point */
|
|
static int pxa_verify_policy(struct cpufreq_policy *policy)
|
|
{
|
|
struct cpufreq_frequency_table *pxa_freqs_table;
|
|
pxa_freqs_t *pxa_freqs;
|
|
int ret;
|
|
|
|
find_freq_tables(&pxa_freqs_table, &pxa_freqs);
|
|
ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table);
|
|
|
|
if (freq_debug)
|
|
pr_debug("Verified CPU policy: %dKhz min to %dKhz max\n",
|
|
policy->min, policy->max);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static unsigned int pxa_cpufreq_get(unsigned int cpu)
|
|
{
|
|
return get_clk_frequency_khz(0);
|
|
}
|
|
|
|
static int pxa_set_target(struct cpufreq_policy *policy,
|
|
unsigned int target_freq,
|
|
unsigned int relation)
|
|
{
|
|
struct cpufreq_frequency_table *pxa_freqs_table;
|
|
pxa_freqs_t *pxa_freq_settings;
|
|
struct cpufreq_freqs freqs;
|
|
unsigned int idx;
|
|
unsigned long flags;
|
|
unsigned int new_freq_cpu, new_freq_mem;
|
|
unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg;
|
|
int ret = 0;
|
|
|
|
/* Get the current policy */
|
|
find_freq_tables(&pxa_freqs_table, &pxa_freq_settings);
|
|
|
|
/* Lookup the next frequency */
|
|
if (cpufreq_frequency_table_target(policy, pxa_freqs_table,
|
|
target_freq, relation, &idx)) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
new_freq_cpu = pxa_freq_settings[idx].khz;
|
|
new_freq_mem = pxa_freq_settings[idx].membus;
|
|
freqs.old = policy->cur;
|
|
freqs.new = new_freq_cpu;
|
|
freqs.cpu = policy->cpu;
|
|
|
|
if (freq_debug)
|
|
pr_debug("Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
|
|
freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
|
|
(new_freq_mem / 2000) : (new_freq_mem / 1000));
|
|
|
|
if (vcc_core && freqs.new > freqs.old)
|
|
ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
|
|
if (ret)
|
|
return ret;
|
|
/*
|
|
* Tell everyone what we're about to do...
|
|
* you should add a notify client with any platform specific
|
|
* Vcc changing capability
|
|
*/
|
|
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
|
|
|
|
/* Calculate the next MDREFR. If we're slowing down the SDRAM clock
|
|
* we need to preset the smaller DRI before the change. If we're
|
|
* speeding up we need to set the larger DRI value after the change.
|
|
*/
|
|
preset_mdrefr = postset_mdrefr = __raw_readl(MDREFR);
|
|
if ((preset_mdrefr & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
|
|
preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK);
|
|
preset_mdrefr |= mdrefr_dri(new_freq_mem);
|
|
}
|
|
postset_mdrefr =
|
|
(postset_mdrefr & ~MDREFR_DRI_MASK) | mdrefr_dri(new_freq_mem);
|
|
|
|
/* If we're dividing the memory clock by two for the SDRAM clock, this
|
|
* must be set prior to the change. Clearing the divide must be done
|
|
* after the change.
|
|
*/
|
|
if (pxa_freq_settings[idx].div2) {
|
|
preset_mdrefr |= MDREFR_DB2_MASK;
|
|
postset_mdrefr |= MDREFR_DB2_MASK;
|
|
} else {
|
|
postset_mdrefr &= ~MDREFR_DB2_MASK;
|
|
}
|
|
|
|
local_irq_save(flags);
|
|
|
|
/* Set new the CCCR and prepare CCLKCFG */
|
|
CCCR = pxa_freq_settings[idx].cccr;
|
|
cclkcfg = pxa_freq_settings[idx].cclkcfg;
|
|
|
|
asm volatile(" \n\
|
|
ldr r4, [%1] /* load MDREFR */ \n\
|
|
b 2f \n\
|
|
.align 5 \n\
|
|
1: \n\
|
|
str %3, [%1] /* preset the MDREFR */ \n\
|
|
mcr p14, 0, %2, c6, c0, 0 /* set CCLKCFG[FCS] */ \n\
|
|
str %4, [%1] /* postset the MDREFR */ \n\
|
|
\n\
|
|
b 3f \n\
|
|
2: b 1b \n\
|
|
3: nop \n\
|
|
"
|
|
: "=&r" (unused)
|
|
: "r" (MDREFR), "r" (cclkcfg),
|
|
"r" (preset_mdrefr), "r" (postset_mdrefr)
|
|
: "r4", "r5");
|
|
local_irq_restore(flags);
|
|
|
|
/*
|
|
* Tell everyone what we've just done...
|
|
* you should add a notify client with any platform specific
|
|
* SDRAM refresh timer adjustments
|
|
*/
|
|
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
|
|
|
|
/*
|
|
* Even if voltage setting fails, we don't report it, as the frequency
|
|
* change succeeded. The voltage reduction is not a critical failure,
|
|
* only power savings will suffer from this.
|
|
*
|
|
* Note: if the voltage change fails, and a return value is returned, a
|
|
* bug is triggered (seems a deadlock). Should anybody find out where,
|
|
* the "return 0" should become a "return ret".
|
|
*/
|
|
if (vcc_core && freqs.new < freqs.old)
|
|
ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pxa_cpufreq_init(struct cpufreq_policy *policy)
|
|
{
|
|
int i;
|
|
unsigned int freq;
|
|
struct cpufreq_frequency_table *pxa255_freq_table;
|
|
pxa_freqs_t *pxa255_freqs;
|
|
|
|
/* try to guess pxa27x cpu */
|
|
if (cpu_is_pxa27x())
|
|
pxa27x_guess_max_freq();
|
|
|
|
pxa_cpufreq_init_voltages();
|
|
|
|
init_sdram_rows();
|
|
|
|
/* set default policy and cpuinfo */
|
|
policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
|
|
policy->cur = get_clk_frequency_khz(0); /* current freq */
|
|
policy->min = policy->max = policy->cur;
|
|
|
|
/* Generate pxa25x the run cpufreq_frequency_table struct */
|
|
for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) {
|
|
pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz;
|
|
pxa255_run_freq_table[i].index = i;
|
|
}
|
|
pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END;
|
|
|
|
/* Generate pxa25x the turbo cpufreq_frequency_table struct */
|
|
for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) {
|
|
pxa255_turbo_freq_table[i].frequency =
|
|
pxa255_turbo_freqs[i].khz;
|
|
pxa255_turbo_freq_table[i].index = i;
|
|
}
|
|
pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END;
|
|
|
|
pxa255_turbo_table = !!pxa255_turbo_table;
|
|
|
|
/* Generate the pxa27x cpufreq_frequency_table struct */
|
|
for (i = 0; i < NUM_PXA27x_FREQS; i++) {
|
|
freq = pxa27x_freqs[i].khz;
|
|
if (freq > pxa27x_maxfreq)
|
|
break;
|
|
pxa27x_freq_table[i].frequency = freq;
|
|
pxa27x_freq_table[i].index = i;
|
|
}
|
|
pxa27x_freq_table[i].index = i;
|
|
pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END;
|
|
|
|
/*
|
|
* Set the policy's minimum and maximum frequencies from the tables
|
|
* just constructed. This sets cpuinfo.mxx_freq, min and max.
|
|
*/
|
|
if (cpu_is_pxa25x()) {
|
|
find_freq_tables(&pxa255_freq_table, &pxa255_freqs);
|
|
pr_info("PXA255 cpufreq using %s frequency table\n",
|
|
pxa255_turbo_table ? "turbo" : "run");
|
|
cpufreq_frequency_table_cpuinfo(policy, pxa255_freq_table);
|
|
}
|
|
else if (cpu_is_pxa27x())
|
|
cpufreq_frequency_table_cpuinfo(policy, pxa27x_freq_table);
|
|
|
|
printk(KERN_INFO "PXA CPU frequency change support initialized\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct cpufreq_driver pxa_cpufreq_driver = {
|
|
.verify = pxa_verify_policy,
|
|
.target = pxa_set_target,
|
|
.init = pxa_cpufreq_init,
|
|
.get = pxa_cpufreq_get,
|
|
.name = "PXA2xx",
|
|
};
|
|
|
|
static int __init pxa_cpu_init(void)
|
|
{
|
|
int ret = -ENODEV;
|
|
if (cpu_is_pxa25x() || cpu_is_pxa27x())
|
|
ret = cpufreq_register_driver(&pxa_cpufreq_driver);
|
|
return ret;
|
|
}
|
|
|
|
static void __exit pxa_cpu_exit(void)
|
|
{
|
|
cpufreq_unregister_driver(&pxa_cpufreq_driver);
|
|
}
|
|
|
|
|
|
MODULE_AUTHOR("Intrinsyc Software Inc.");
|
|
MODULE_DESCRIPTION("CPU frequency changing driver for the PXA architecture");
|
|
MODULE_LICENSE("GPL");
|
|
module_init(pxa_cpu_init);
|
|
module_exit(pxa_cpu_exit);
|