OpenCloudOS-Kernel/drivers/scsi/smartpqi/smartpqi_sis.c

503 lines
14 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* driver for Microchip PQI-based storage controllers
* Copyright (c) 2019-2022 Microchip Technology Inc. and its subsidiaries
* Copyright (c) 2016-2018 Microsemi Corporation
* Copyright (c) 2016 PMC-Sierra, Inc.
*
* Questions/Comments/Bugfixes to storagedev@microchip.com
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <scsi/scsi_device.h>
#include <asm/unaligned.h>
#include "smartpqi.h"
#include "smartpqi_sis.h"
/* legacy SIS interface commands */
#define SIS_CMD_GET_ADAPTER_PROPERTIES 0x19
#define SIS_CMD_INIT_BASE_STRUCT_ADDRESS 0x1b
#define SIS_CMD_GET_PQI_CAPABILITIES 0x3000
/* for submission of legacy SIS commands */
#define SIS_REENABLE_SIS_MODE 0x1
#define SIS_ENABLE_MSIX 0x40
#define SIS_ENABLE_INTX 0x80
#define SIS_SOFT_RESET 0x100
#define SIS_CMD_READY 0x200
#define SIS_TRIGGER_SHUTDOWN 0x800000
#define SIS_PQI_RESET_QUIESCE 0x1000000
#define SIS_CMD_COMPLETE 0x1000
#define SIS_CLEAR_CTRL_TO_HOST_DOORBELL 0x1000
#define SIS_CMD_STATUS_SUCCESS 0x1
#define SIS_CMD_COMPLETE_TIMEOUT_SECS 30
#define SIS_CMD_COMPLETE_POLL_INTERVAL_MSECS 10
/* used with SIS_CMD_GET_ADAPTER_PROPERTIES command */
#define SIS_EXTENDED_PROPERTIES_SUPPORTED 0x800000
#define SIS_SMARTARRAY_FEATURES_SUPPORTED 0x2
#define SIS_PQI_MODE_SUPPORTED 0x4
#define SIS_PQI_RESET_QUIESCE_SUPPORTED 0x8
#define SIS_REQUIRED_EXTENDED_PROPERTIES \
(SIS_SMARTARRAY_FEATURES_SUPPORTED | SIS_PQI_MODE_SUPPORTED)
/* used with SIS_CMD_INIT_BASE_STRUCT_ADDRESS command */
#define SIS_BASE_STRUCT_REVISION 9
#define SIS_BASE_STRUCT_ALIGNMENT 16
#define SIS_CTRL_KERNEL_FW_TRIAGE 0x3
#define SIS_CTRL_KERNEL_UP 0x80
#define SIS_CTRL_KERNEL_PANIC 0x100
#define SIS_CTRL_READY_TIMEOUT_SECS 180
#define SIS_CTRL_READY_RESUME_TIMEOUT_SECS 90
#define SIS_CTRL_READY_POLL_INTERVAL_MSECS 10
enum sis_fw_triage_status {
FW_TRIAGE_NOT_STARTED = 0,
FW_TRIAGE_STARTED,
FW_TRIAGE_COND_INVALID,
FW_TRIAGE_COMPLETED
};
#pragma pack(1)
/* for use with SIS_CMD_INIT_BASE_STRUCT_ADDRESS command */
struct sis_base_struct {
__le32 revision; /* revision of this structure */
__le32 flags; /* reserved */
__le32 error_buffer_paddr_low; /* lower 32 bits of physical memory */
/* buffer for PQI error response */
/* data */
__le32 error_buffer_paddr_high; /* upper 32 bits of physical */
/* memory buffer for PQI */
/* error response data */
__le32 error_buffer_element_length; /* length of each PQI error */
/* response buffer element */
/* in bytes */
__le32 error_buffer_num_elements; /* total number of PQI error */
/* response buffers available */
};
#pragma pack()
unsigned int sis_ctrl_ready_timeout_secs = SIS_CTRL_READY_TIMEOUT_SECS;
static int sis_wait_for_ctrl_ready_with_timeout(struct pqi_ctrl_info *ctrl_info,
unsigned int timeout_secs)
{
unsigned long timeout;
u32 status;
timeout = (timeout_secs * HZ) + jiffies;
while (1) {
status = readl(&ctrl_info->registers->sis_firmware_status);
if (status != ~0) {
if (status & SIS_CTRL_KERNEL_PANIC) {
dev_err(&ctrl_info->pci_dev->dev,
"controller is offline: status code 0x%x\n",
readl(
&ctrl_info->registers->sis_mailbox[7]));
return -ENODEV;
}
if (status & SIS_CTRL_KERNEL_UP)
break;
}
if (time_after(jiffies, timeout)) {
dev_err(&ctrl_info->pci_dev->dev,
"controller not ready after %u seconds\n",
timeout_secs);
return -ETIMEDOUT;
}
msleep(SIS_CTRL_READY_POLL_INTERVAL_MSECS);
}
return 0;
}
int sis_wait_for_ctrl_ready(struct pqi_ctrl_info *ctrl_info)
{
return sis_wait_for_ctrl_ready_with_timeout(ctrl_info,
sis_ctrl_ready_timeout_secs);
}
int sis_wait_for_ctrl_ready_resume(struct pqi_ctrl_info *ctrl_info)
{
return sis_wait_for_ctrl_ready_with_timeout(ctrl_info,
SIS_CTRL_READY_RESUME_TIMEOUT_SECS);
}
bool sis_is_firmware_running(struct pqi_ctrl_info *ctrl_info)
{
bool running;
u32 status;
status = readl(&ctrl_info->registers->sis_firmware_status);
if (status != ~0 && (status & SIS_CTRL_KERNEL_PANIC))
running = false;
else
running = true;
if (!running)
dev_err(&ctrl_info->pci_dev->dev,
"controller is offline: status code 0x%x\n",
readl(&ctrl_info->registers->sis_mailbox[7]));
return running;
}
bool sis_is_kernel_up(struct pqi_ctrl_info *ctrl_info)
{
return readl(&ctrl_info->registers->sis_firmware_status) &
SIS_CTRL_KERNEL_UP;
}
u32 sis_get_product_id(struct pqi_ctrl_info *ctrl_info)
{
return readl(&ctrl_info->registers->sis_product_identifier);
}
/* used for passing command parameters/results when issuing SIS commands */
struct sis_sync_cmd_params {
u32 mailbox[6]; /* mailboxes 0-5 */
};
static int sis_send_sync_cmd(struct pqi_ctrl_info *ctrl_info,
u32 cmd, struct sis_sync_cmd_params *params)
{
struct pqi_ctrl_registers __iomem *registers;
unsigned int i;
unsigned long timeout;
u32 doorbell;
u32 cmd_status;
registers = ctrl_info->registers;
/* Write the command to mailbox 0. */
writel(cmd, &registers->sis_mailbox[0]);
/*
* Write the command parameters to mailboxes 1-4 (mailbox 5 is not used
* when sending a command to the controller).
*/
for (i = 1; i <= 4; i++)
writel(params->mailbox[i], &registers->sis_mailbox[i]);
/* Clear the command doorbell. */
writel(SIS_CLEAR_CTRL_TO_HOST_DOORBELL,
&registers->sis_ctrl_to_host_doorbell_clear);
/* Disable doorbell interrupts by masking all interrupts. */
writel(~0, &registers->sis_interrupt_mask);
usleep_range(1000, 2000);
/*
* Force the completion of the interrupt mask register write before
* submitting the command.
*/
readl(&registers->sis_interrupt_mask);
/* Submit the command to the controller. */
writel(SIS_CMD_READY, &registers->sis_host_to_ctrl_doorbell);
/*
* Poll for command completion. Note that the call to msleep() is at
* the top of the loop in order to give the controller time to start
* processing the command before we start polling.
*/
timeout = (SIS_CMD_COMPLETE_TIMEOUT_SECS * HZ) + jiffies;
while (1) {
msleep(SIS_CMD_COMPLETE_POLL_INTERVAL_MSECS);
doorbell = readl(&registers->sis_ctrl_to_host_doorbell);
if (doorbell & SIS_CMD_COMPLETE)
break;
if (time_after(jiffies, timeout))
return -ETIMEDOUT;
}
/* Read the command status from mailbox 0. */
cmd_status = readl(&registers->sis_mailbox[0]);
if (cmd_status != SIS_CMD_STATUS_SUCCESS) {
dev_err(&ctrl_info->pci_dev->dev,
"SIS command failed for command 0x%x: status = 0x%x\n",
cmd, cmd_status);
return -EINVAL;
}
/*
* The command completed successfully, so save the command status and
* read the values returned in mailboxes 1-5.
*/
params->mailbox[0] = cmd_status;
for (i = 1; i < ARRAY_SIZE(params->mailbox); i++)
params->mailbox[i] = readl(&registers->sis_mailbox[i]);
return 0;
}
/*
* This function verifies that we are talking to a controller that speaks PQI.
*/
int sis_get_ctrl_properties(struct pqi_ctrl_info *ctrl_info)
{
int rc;
u32 properties;
u32 extended_properties;
struct sis_sync_cmd_params params;
memset(&params, 0, sizeof(params));
rc = sis_send_sync_cmd(ctrl_info, SIS_CMD_GET_ADAPTER_PROPERTIES,
&params);
if (rc)
return rc;
properties = params.mailbox[1];
if (!(properties & SIS_EXTENDED_PROPERTIES_SUPPORTED))
return -ENODEV;
extended_properties = params.mailbox[4];
if ((extended_properties & SIS_REQUIRED_EXTENDED_PROPERTIES) !=
SIS_REQUIRED_EXTENDED_PROPERTIES)
return -ENODEV;
if (extended_properties & SIS_PQI_RESET_QUIESCE_SUPPORTED)
ctrl_info->pqi_reset_quiesce_supported = true;
return 0;
}
int sis_get_pqi_capabilities(struct pqi_ctrl_info *ctrl_info)
{
int rc;
struct sis_sync_cmd_params params;
memset(&params, 0, sizeof(params));
rc = sis_send_sync_cmd(ctrl_info, SIS_CMD_GET_PQI_CAPABILITIES,
&params);
if (rc)
return rc;
ctrl_info->max_sg_entries = params.mailbox[1];
ctrl_info->max_transfer_size = params.mailbox[2];
ctrl_info->max_outstanding_requests = params.mailbox[3];
ctrl_info->config_table_offset = params.mailbox[4];
ctrl_info->config_table_length = params.mailbox[5];
return 0;
}
int sis_init_base_struct_addr(struct pqi_ctrl_info *ctrl_info)
{
int rc;
void *base_struct_unaligned;
struct sis_base_struct *base_struct;
struct sis_sync_cmd_params params;
unsigned long error_buffer_paddr;
dma_addr_t bus_address;
base_struct_unaligned = kzalloc(sizeof(*base_struct)
+ SIS_BASE_STRUCT_ALIGNMENT - 1, GFP_KERNEL);
if (!base_struct_unaligned)
return -ENOMEM;
base_struct = PTR_ALIGN(base_struct_unaligned,
SIS_BASE_STRUCT_ALIGNMENT);
error_buffer_paddr = (unsigned long)ctrl_info->error_buffer_dma_handle;
put_unaligned_le32(SIS_BASE_STRUCT_REVISION, &base_struct->revision);
put_unaligned_le32(lower_32_bits(error_buffer_paddr),
&base_struct->error_buffer_paddr_low);
put_unaligned_le32(upper_32_bits(error_buffer_paddr),
&base_struct->error_buffer_paddr_high);
put_unaligned_le32(PQI_ERROR_BUFFER_ELEMENT_LENGTH,
&base_struct->error_buffer_element_length);
put_unaligned_le32(ctrl_info->max_io_slots,
&base_struct->error_buffer_num_elements);
bus_address = dma_map_single(&ctrl_info->pci_dev->dev, base_struct,
sizeof(*base_struct), DMA_TO_DEVICE);
if (dma_mapping_error(&ctrl_info->pci_dev->dev, bus_address)) {
rc = -ENOMEM;
goto out;
}
memset(&params, 0, sizeof(params));
params.mailbox[1] = lower_32_bits((u64)bus_address);
params.mailbox[2] = upper_32_bits((u64)bus_address);
params.mailbox[3] = sizeof(*base_struct);
rc = sis_send_sync_cmd(ctrl_info, SIS_CMD_INIT_BASE_STRUCT_ADDRESS,
&params);
dma_unmap_single(&ctrl_info->pci_dev->dev, bus_address,
sizeof(*base_struct), DMA_TO_DEVICE);
out:
kfree(base_struct_unaligned);
return rc;
}
#define SIS_DOORBELL_BIT_CLEAR_TIMEOUT_SECS 30
static int sis_wait_for_doorbell_bit_to_clear(
struct pqi_ctrl_info *ctrl_info, u32 bit)
{
int rc = 0;
u32 doorbell_register;
unsigned long timeout;
timeout = (SIS_DOORBELL_BIT_CLEAR_TIMEOUT_SECS * HZ) + jiffies;
while (1) {
doorbell_register =
readl(&ctrl_info->registers->sis_host_to_ctrl_doorbell);
if ((doorbell_register & bit) == 0)
break;
if (readl(&ctrl_info->registers->sis_firmware_status) &
SIS_CTRL_KERNEL_PANIC) {
rc = -ENODEV;
break;
}
if (time_after(jiffies, timeout)) {
dev_err(&ctrl_info->pci_dev->dev,
"doorbell register bit 0x%x not cleared\n",
bit);
rc = -ETIMEDOUT;
break;
}
usleep_range(1000, 2000);
}
return rc;
}
static inline int sis_set_doorbell_bit(struct pqi_ctrl_info *ctrl_info, u32 bit)
{
writel(bit, &ctrl_info->registers->sis_host_to_ctrl_doorbell);
usleep_range(1000, 2000);
return sis_wait_for_doorbell_bit_to_clear(ctrl_info, bit);
}
void sis_enable_msix(struct pqi_ctrl_info *ctrl_info)
{
sis_set_doorbell_bit(ctrl_info, SIS_ENABLE_MSIX);
}
void sis_enable_intx(struct pqi_ctrl_info *ctrl_info)
{
sis_set_doorbell_bit(ctrl_info, SIS_ENABLE_INTX);
}
void sis_shutdown_ctrl(struct pqi_ctrl_info *ctrl_info,
enum pqi_ctrl_shutdown_reason ctrl_shutdown_reason)
{
if (readl(&ctrl_info->registers->sis_firmware_status) &
SIS_CTRL_KERNEL_PANIC)
return;
if (ctrl_info->firmware_triage_supported)
writel(ctrl_shutdown_reason, &ctrl_info->registers->sis_ctrl_shutdown_reason_code);
writel(SIS_TRIGGER_SHUTDOWN, &ctrl_info->registers->sis_host_to_ctrl_doorbell);
}
int sis_pqi_reset_quiesce(struct pqi_ctrl_info *ctrl_info)
{
return sis_set_doorbell_bit(ctrl_info, SIS_PQI_RESET_QUIESCE);
}
int sis_reenable_sis_mode(struct pqi_ctrl_info *ctrl_info)
{
return sis_set_doorbell_bit(ctrl_info, SIS_REENABLE_SIS_MODE);
}
void sis_write_driver_scratch(struct pqi_ctrl_info *ctrl_info, u32 value)
{
writel(value, &ctrl_info->registers->sis_driver_scratch);
usleep_range(1000, 2000);
}
u32 sis_read_driver_scratch(struct pqi_ctrl_info *ctrl_info)
{
return readl(&ctrl_info->registers->sis_driver_scratch);
}
static inline enum sis_fw_triage_status
sis_read_firmware_triage_status(struct pqi_ctrl_info *ctrl_info)
{
return ((enum sis_fw_triage_status)(readl(&ctrl_info->registers->sis_firmware_status) &
SIS_CTRL_KERNEL_FW_TRIAGE));
}
void sis_soft_reset(struct pqi_ctrl_info *ctrl_info)
{
writel(SIS_SOFT_RESET,
&ctrl_info->registers->sis_host_to_ctrl_doorbell);
}
#define SIS_FW_TRIAGE_STATUS_TIMEOUT_SECS 300
#define SIS_FW_TRIAGE_STATUS_POLL_INTERVAL_SECS 1
int sis_wait_for_fw_triage_completion(struct pqi_ctrl_info *ctrl_info)
{
int rc;
enum sis_fw_triage_status status;
unsigned long timeout;
timeout = (SIS_FW_TRIAGE_STATUS_TIMEOUT_SECS * HZ) + jiffies;
while (1) {
status = sis_read_firmware_triage_status(ctrl_info);
if (status == FW_TRIAGE_COND_INVALID) {
dev_err(&ctrl_info->pci_dev->dev,
"firmware triage condition invalid\n");
rc = -EINVAL;
break;
} else if (status == FW_TRIAGE_NOT_STARTED ||
status == FW_TRIAGE_COMPLETED) {
rc = 0;
break;
}
if (time_after(jiffies, timeout)) {
dev_err(&ctrl_info->pci_dev->dev,
"timed out waiting for firmware triage status\n");
rc = -ETIMEDOUT;
break;
}
ssleep(SIS_FW_TRIAGE_STATUS_POLL_INTERVAL_SECS);
}
return rc;
}
void sis_verify_structures(void)
{
BUILD_BUG_ON(offsetof(struct sis_base_struct,
revision) != 0x0);
BUILD_BUG_ON(offsetof(struct sis_base_struct,
flags) != 0x4);
BUILD_BUG_ON(offsetof(struct sis_base_struct,
error_buffer_paddr_low) != 0x8);
BUILD_BUG_ON(offsetof(struct sis_base_struct,
error_buffer_paddr_high) != 0xc);
BUILD_BUG_ON(offsetof(struct sis_base_struct,
error_buffer_element_length) != 0x10);
BUILD_BUG_ON(offsetof(struct sis_base_struct,
error_buffer_num_elements) != 0x14);
BUILD_BUG_ON(sizeof(struct sis_base_struct) != 0x18);
}