2494 lines
83 KiB
C
2494 lines
83 KiB
C
/*
|
|
* USB FTDI SIO driver
|
|
*
|
|
* Copyright (C) 1999 - 2001
|
|
* Greg Kroah-Hartman (greg@kroah.com)
|
|
* Bill Ryder (bryder@sgi.com)
|
|
* Copyright (C) 2002
|
|
* Kuba Ober (kuba@mareimbrium.org)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* See Documentation/usb/usb-serial.txt for more information on using this
|
|
* driver
|
|
*
|
|
* See http://ftdi-usb-sio.sourceforge.net for upto date testing info
|
|
* and extra documentation
|
|
*
|
|
* Change entries from 2004 and earlier can be found in versions of this
|
|
* file in kernel versions prior to the 2.6.24 release.
|
|
*
|
|
*/
|
|
|
|
/* Bill Ryder - bryder@sgi.com - wrote the FTDI_SIO implementation */
|
|
/* Thanx to FTDI for so kindly providing details of the protocol required */
|
|
/* to talk to the device */
|
|
/* Thanx to gkh and the rest of the usb dev group for all code I have
|
|
assimilated :-) */
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_driver.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/module.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/usb/serial.h>
|
|
#include "ftdi_sio.h"
|
|
|
|
/*
|
|
* Version Information
|
|
*/
|
|
#define DRIVER_VERSION "v1.4.3"
|
|
#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>"
|
|
#define DRIVER_DESC "USB FTDI Serial Converters Driver"
|
|
|
|
static int debug;
|
|
static __u16 vendor = FTDI_VID;
|
|
static __u16 product;
|
|
|
|
struct ftdi_private {
|
|
ftdi_chip_type_t chip_type;
|
|
/* type of device, either SIO or FT8U232AM */
|
|
int baud_base; /* baud base clock for divisor setting */
|
|
int custom_divisor; /* custom_divisor kludge, this is for
|
|
baud_base (different from what goes to the
|
|
chip!) */
|
|
__u16 last_set_data_urb_value ;
|
|
/* the last data state set - needed for doing
|
|
* a break
|
|
*/
|
|
int write_offset; /* This is the offset in the usb data block to
|
|
* write the serial data - it varies between
|
|
* devices
|
|
*/
|
|
int flags; /* some ASYNC_xxxx flags are supported */
|
|
unsigned long last_dtr_rts; /* saved modem control outputs */
|
|
wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
|
|
char prev_status, diff_status; /* Used for TIOCMIWAIT */
|
|
__u8 rx_flags; /* receive state flags (throttling) */
|
|
spinlock_t rx_lock; /* spinlock for receive state */
|
|
struct delayed_work rx_work;
|
|
struct usb_serial_port *port;
|
|
int rx_processed;
|
|
unsigned long rx_bytes;
|
|
|
|
__u16 interface; /* FT2232C port interface (0 for FT232/245) */
|
|
|
|
speed_t force_baud; /* if non-zero, force the baud rate to
|
|
this value */
|
|
int force_rtscts; /* if non-zero, force RTS-CTS to always
|
|
be enabled */
|
|
|
|
spinlock_t tx_lock; /* spinlock for transmit state */
|
|
unsigned long tx_bytes;
|
|
unsigned long tx_outstanding_bytes;
|
|
unsigned long tx_outstanding_urbs;
|
|
};
|
|
|
|
/* struct ftdi_sio_quirk is used by devices requiring special attention. */
|
|
struct ftdi_sio_quirk {
|
|
int (*probe)(struct usb_serial *);
|
|
/* Special settings for probed ports. */
|
|
void (*port_probe)(struct ftdi_private *);
|
|
};
|
|
|
|
static int ftdi_jtag_probe(struct usb_serial *serial);
|
|
static int ftdi_mtxorb_hack_setup(struct usb_serial *serial);
|
|
static void ftdi_USB_UIRT_setup(struct ftdi_private *priv);
|
|
static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
|
|
|
|
static struct ftdi_sio_quirk ftdi_jtag_quirk = {
|
|
.probe = ftdi_jtag_probe,
|
|
};
|
|
|
|
static struct ftdi_sio_quirk ftdi_mtxorb_hack_quirk = {
|
|
.probe = ftdi_mtxorb_hack_setup,
|
|
};
|
|
|
|
static struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = {
|
|
.port_probe = ftdi_USB_UIRT_setup,
|
|
};
|
|
|
|
static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
|
|
.port_probe = ftdi_HE_TIRA1_setup,
|
|
};
|
|
|
|
/*
|
|
* The 8U232AM has the same API as the sio except for:
|
|
* - it can support MUCH higher baudrates; up to:
|
|
* o 921600 for RS232 and 2000000 for RS422/485 at 48MHz
|
|
* o 230400 at 12MHz
|
|
* so .. 8U232AM's baudrate setting codes are different
|
|
* - it has a two byte status code.
|
|
* - it returns characters every 16ms (the FTDI does it every 40ms)
|
|
*
|
|
* the bcdDevice value is used to differentiate FT232BM and FT245BM from
|
|
* the earlier FT8U232AM and FT8U232BM. For now, include all known VID/PID
|
|
* combinations in both tables.
|
|
* FIXME: perhaps bcdDevice can also identify 12MHz FT8U232AM devices,
|
|
* but I don't know if those ever went into mass production. [Ian Abbott]
|
|
*/
|
|
|
|
|
|
|
|
static struct usb_device_id id_table_combined [] = {
|
|
{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_3_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_4_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_5_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_6_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_7_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_IPLUS2_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_DMX4ALL) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_SIO_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_232RL_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
|
|
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
|
|
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_XF_633_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_XF_631_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_XF_635_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_XF_640_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_XF_642_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_DSS20_PID) },
|
|
{ USB_DEVICE(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_VNHCPCUSB_D_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_0_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_1_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_2_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_3_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0103_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0104_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0105_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0106_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0107_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0108_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0109_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010A_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010B_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010C_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010D_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010E_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010F_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0110_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0111_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0112_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0113_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0114_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0115_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0116_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0117_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0118_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0119_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011A_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011B_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011C_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011D_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011E_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011F_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0120_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0121_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0122_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0123_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0124_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0125_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0126_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0127_PID),
|
|
.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0128_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0129_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012A_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012B_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012C_PID),
|
|
.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012D_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012E_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012F_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0130_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0131_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0132_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0133_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0134_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0135_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0136_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0137_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0138_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0139_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013A_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013B_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013C_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013D_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013E_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013F_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0140_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0141_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0142_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0143_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0144_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0145_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0146_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0147_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0148_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0149_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014A_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014B_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014C_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014D_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014E_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014F_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0150_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0151_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0152_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0153_PID),
|
|
.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0154_PID),
|
|
.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0155_PID),
|
|
.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0156_PID),
|
|
.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0157_PID),
|
|
.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0158_PID),
|
|
.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0159_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015A_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015B_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015C_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015D_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015E_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015F_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0160_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0161_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0162_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0163_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0164_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0165_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0166_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0167_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0168_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0169_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016A_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016B_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016C_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016D_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016E_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016F_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0170_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0171_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0172_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0173_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0174_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0175_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0176_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0177_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0178_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0179_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017A_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017B_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017C_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017D_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017E_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017F_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0180_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0181_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0182_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0183_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0184_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0185_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0186_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0187_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0188_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0189_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018A_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018B_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018C_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018D_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018E_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018F_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0190_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0191_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0192_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0193_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0194_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0195_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0196_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0197_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0198_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0199_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019A_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019B_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019C_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019D_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019E_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019F_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A0_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A1_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A2_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A3_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A4_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A5_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A6_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A7_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A8_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A9_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AA_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AB_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AC_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AD_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AE_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AF_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B0_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B1_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B2_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B3_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B4_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B5_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B6_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B7_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B8_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B9_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BA_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BB_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BC_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BD_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BE_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BF_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C0_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C1_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C2_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C3_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C4_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C5_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C6_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C7_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C8_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C9_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CA_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CB_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CC_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CD_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CE_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CF_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D0_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D1_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D2_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D3_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D4_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D5_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D6_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D7_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D8_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D9_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DA_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DB_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DC_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DD_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DE_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DF_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E0_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E1_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E2_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E3_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E4_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E5_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E6_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E7_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E8_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E9_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EA_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EB_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EC_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01ED_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EE_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EF_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F0_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F1_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F2_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F3_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F4_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F5_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F6_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F7_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F8_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F9_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FA_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FB_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FC_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FD_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FE_PID) },
|
|
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FF_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_USBX_707_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2101_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2102_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2103_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2104_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2106_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_1_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_2_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_1_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_2_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_1_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_2_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_1_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_2_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_3_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_4_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_1_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_2_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_3_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_4_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_1_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_2_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_3_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_4_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_1_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_2_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_3_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_4_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_5_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_6_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_7_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_8_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_1_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_2_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_3_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_4_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_5_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_6_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_7_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_8_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_1_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_2_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_3_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_4_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_5_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_6_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_7_PID) },
|
|
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) },
|
|
{ USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) },
|
|
{ USB_DEVICE(OCT_VID, OCT_US101_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_HE_TIRA1_PID),
|
|
.driver_info = (kernel_ulong_t)&ftdi_HE_TIRA1_quirk },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID),
|
|
.driver_info = (kernel_ulong_t)&ftdi_USB_UIRT_quirk },
|
|
{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_1) },
|
|
{ USB_DEVICE(FTDI_VID, PROTEGO_R2X0) },
|
|
{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_3) },
|
|
{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_4) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E808_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E809_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80A_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80B_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80C_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80D_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80E_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80F_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E888_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E889_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88A_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88B_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88C_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88D_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88E_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88F_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UO100_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UR100_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_PYRAMID_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_IBS_US485_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PICPRO_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PCMCIA_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PK1_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_IBS_RS232MON_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_IBS_APP70_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) },
|
|
/*
|
|
* Due to many user requests for multiple ELV devices we enable
|
|
* them by default.
|
|
*/
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UDF77_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UIO88_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UAD8_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UDA7_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ELV_USI2_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ELV_T1100_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ELV_PCD200_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ELV_ULA200_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ELV_CSI8_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ELV_EM1000DL_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) },
|
|
{ USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
|
|
{ USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
|
|
{ USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
|
|
{ USB_DEVICE(FTDI_VID, LINX_FUTURE_1_PID) },
|
|
{ USB_DEVICE(FTDI_VID, LINX_FUTURE_2_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_CCSMACHX_2_PID) },
|
|
{ USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) },
|
|
{ USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) },
|
|
{ USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) },
|
|
{ USB_DEVICE(FALCOM_VID, FALCOM_TWIST_PID) },
|
|
{ USB_DEVICE(FALCOM_VID, FALCOM_SAMBA_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_SUUNTO_SPORTS_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) },
|
|
{ USB_DEVICE(TTI_VID, TTI_QL355P_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
|
|
{ USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
|
|
{ USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
|
|
{ USB_DEVICE(BANDB_VID, BANDB_USO9ML2_PID) },
|
|
{ USB_DEVICE(FTDI_VID, EVER_ECO_PRO_CDS) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) },
|
|
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_0_PID) },
|
|
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_1_PID) },
|
|
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_2_PID) },
|
|
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_3_PID) },
|
|
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_4_PID) },
|
|
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_5_PID) },
|
|
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_6_PID) },
|
|
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) },
|
|
{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_KW_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_YS_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_IC_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_DB9_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_RS232_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y9_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_VCP_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_D2XX_PID) },
|
|
{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
|
|
{ USB_DEVICE(EVOLUTION_VID, EVO_HYBRID_PID) },
|
|
{ USB_DEVICE(EVOLUTION_VID, EVO_RCM4_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HR_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HRC_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16IC_PID) },
|
|
{ USB_DEVICE(KOBIL_VID, KOBIL_CONV_B1_PID) },
|
|
{ USB_DEVICE(KOBIL_VID, KOBIL_CONV_KAAN_PID) },
|
|
{ USB_DEVICE(POSIFLEX_VID, POSIFLEX_PP7000_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_TTUSB_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ECLO_COM_1WIRE_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_777_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_8900F_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
|
|
{ USB_DEVICE(ICOM_ID1_VID, ICOM_ID1_PID) },
|
|
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
|
|
{ USB_DEVICE(TESTO_VID, TESTO_USB_INTERFACE_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_GAMMA_SCOUT_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13M_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) },
|
|
{ USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
|
|
{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
|
|
{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) },
|
|
{ USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID),
|
|
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
|
|
{ USB_DEVICE(FIC_VID, FIC_NEO1973_DEBUG_PID),
|
|
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID),
|
|
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
|
|
{ USB_DEVICE(FTDI_VID, LMI_LM3S_DEVEL_BOARD_PID),
|
|
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
|
|
{ USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID),
|
|
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
|
|
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
|
|
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
|
|
{ USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
|
|
{ USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) },
|
|
{ USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID) },
|
|
{ USB_DEVICE(ATMEL_VID, STK541_PID) },
|
|
{ USB_DEVICE(DE_VID, STB_PID) },
|
|
{ USB_DEVICE(DE_VID, WHT_PID) },
|
|
{ USB_DEVICE(ADI_VID, ADI_GNICE_PID),
|
|
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
|
|
{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
|
|
{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
|
|
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
|
|
{ }, /* Optional parameter entry */
|
|
{ } /* Terminating entry */
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(usb, id_table_combined);
|
|
|
|
static struct usb_driver ftdi_driver = {
|
|
.name = "ftdi_sio",
|
|
.probe = usb_serial_probe,
|
|
.disconnect = usb_serial_disconnect,
|
|
.id_table = id_table_combined,
|
|
.no_dynamic_id = 1,
|
|
};
|
|
|
|
static const char *ftdi_chip_name[] = {
|
|
[SIO] = "SIO", /* the serial part of FT8U100AX */
|
|
[FT8U232AM] = "FT8U232AM",
|
|
[FT232BM] = "FT232BM",
|
|
[FT2232C] = "FT2232C",
|
|
[FT232RL] = "FT232RL",
|
|
};
|
|
|
|
|
|
/* Constants for read urb and write urb */
|
|
#define BUFSZ 512
|
|
#define PKTSZ 64
|
|
|
|
/* rx_flags */
|
|
#define THROTTLED 0x01
|
|
#define ACTUALLY_THROTTLED 0x02
|
|
|
|
/* Used for TIOCMIWAIT */
|
|
#define FTDI_STATUS_B0_MASK (FTDI_RS0_CTS | FTDI_RS0_DSR | FTDI_RS0_RI | FTDI_RS0_RLSD)
|
|
#define FTDI_STATUS_B1_MASK (FTDI_RS_BI)
|
|
/* End TIOCMIWAIT */
|
|
|
|
#define FTDI_IMPL_ASYNC_FLAGS = (ASYNC_SPD_HI | ASYNC_SPD_VHI \
|
|
| ASYNC_SPD_CUST | ASYNC_SPD_SHI | ASYNC_SPD_WARP)
|
|
|
|
/* function prototypes for a FTDI serial converter */
|
|
static int ftdi_sio_probe(struct usb_serial *serial,
|
|
const struct usb_device_id *id);
|
|
static void ftdi_shutdown(struct usb_serial *serial);
|
|
static int ftdi_sio_port_probe(struct usb_serial_port *port);
|
|
static int ftdi_sio_port_remove(struct usb_serial_port *port);
|
|
static int ftdi_open(struct tty_struct *tty,
|
|
struct usb_serial_port *port, struct file *filp);
|
|
static void ftdi_close(struct tty_struct *tty,
|
|
struct usb_serial_port *port, struct file *filp);
|
|
static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
|
|
const unsigned char *buf, int count);
|
|
static int ftdi_write_room(struct tty_struct *tty);
|
|
static int ftdi_chars_in_buffer(struct tty_struct *tty);
|
|
static void ftdi_write_bulk_callback(struct urb *urb);
|
|
static void ftdi_read_bulk_callback(struct urb *urb);
|
|
static void ftdi_process_read(struct work_struct *work);
|
|
static void ftdi_set_termios(struct tty_struct *tty,
|
|
struct usb_serial_port *port, struct ktermios *old);
|
|
static int ftdi_tiocmget(struct tty_struct *tty, struct file *file);
|
|
static int ftdi_tiocmset(struct tty_struct *tty, struct file *file,
|
|
unsigned int set, unsigned int clear);
|
|
static int ftdi_ioctl(struct tty_struct *tty, struct file *file,
|
|
unsigned int cmd, unsigned long arg);
|
|
static void ftdi_break_ctl(struct tty_struct *tty, int break_state);
|
|
static void ftdi_throttle(struct tty_struct *tty);
|
|
static void ftdi_unthrottle(struct tty_struct *tty);
|
|
|
|
static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base);
|
|
static unsigned short int ftdi_232am_baud_to_divisor(int baud);
|
|
static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base);
|
|
static __u32 ftdi_232bm_baud_to_divisor(int baud);
|
|
|
|
static struct usb_serial_driver ftdi_sio_device = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "ftdi_sio",
|
|
},
|
|
.description = "FTDI USB Serial Device",
|
|
.usb_driver = &ftdi_driver ,
|
|
.id_table = id_table_combined,
|
|
.num_ports = 1,
|
|
.probe = ftdi_sio_probe,
|
|
.port_probe = ftdi_sio_port_probe,
|
|
.port_remove = ftdi_sio_port_remove,
|
|
.open = ftdi_open,
|
|
.close = ftdi_close,
|
|
.throttle = ftdi_throttle,
|
|
.unthrottle = ftdi_unthrottle,
|
|
.write = ftdi_write,
|
|
.write_room = ftdi_write_room,
|
|
.chars_in_buffer = ftdi_chars_in_buffer,
|
|
.read_bulk_callback = ftdi_read_bulk_callback,
|
|
.write_bulk_callback = ftdi_write_bulk_callback,
|
|
.tiocmget = ftdi_tiocmget,
|
|
.tiocmset = ftdi_tiocmset,
|
|
.ioctl = ftdi_ioctl,
|
|
.set_termios = ftdi_set_termios,
|
|
.break_ctl = ftdi_break_ctl,
|
|
.shutdown = ftdi_shutdown,
|
|
};
|
|
|
|
|
|
#define WDR_TIMEOUT 5000 /* default urb timeout */
|
|
#define WDR_SHORT_TIMEOUT 1000 /* shorter urb timeout */
|
|
|
|
/* High and low are for DTR, RTS etc etc */
|
|
#define HIGH 1
|
|
#define LOW 0
|
|
|
|
/* number of outstanding urbs to prevent userspace DoS from happening */
|
|
#define URB_UPPER_LIMIT 42
|
|
|
|
/*
|
|
* ***************************************************************************
|
|
* Utility functions
|
|
* ***************************************************************************
|
|
*/
|
|
|
|
static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base)
|
|
{
|
|
unsigned short int divisor;
|
|
/* divisor shifted 3 bits to the left */
|
|
int divisor3 = base / 2 / baud;
|
|
if ((divisor3 & 0x7) == 7)
|
|
divisor3++; /* round x.7/8 up to x+1 */
|
|
divisor = divisor3 >> 3;
|
|
divisor3 &= 0x7;
|
|
if (divisor3 == 1)
|
|
divisor |= 0xc000;
|
|
else if (divisor3 >= 4)
|
|
divisor |= 0x4000;
|
|
else if (divisor3 != 0)
|
|
divisor |= 0x8000;
|
|
else if (divisor == 1)
|
|
divisor = 0; /* special case for maximum baud rate */
|
|
return divisor;
|
|
}
|
|
|
|
static unsigned short int ftdi_232am_baud_to_divisor(int baud)
|
|
{
|
|
return ftdi_232am_baud_base_to_divisor(baud, 48000000);
|
|
}
|
|
|
|
static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base)
|
|
{
|
|
static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
|
|
__u32 divisor;
|
|
/* divisor shifted 3 bits to the left */
|
|
int divisor3 = base / 2 / baud;
|
|
divisor = divisor3 >> 3;
|
|
divisor |= (__u32)divfrac[divisor3 & 0x7] << 14;
|
|
/* Deal with special cases for highest baud rates. */
|
|
if (divisor == 1)
|
|
divisor = 0;
|
|
else if (divisor == 0x4001)
|
|
divisor = 1;
|
|
return divisor;
|
|
}
|
|
|
|
static __u32 ftdi_232bm_baud_to_divisor(int baud)
|
|
{
|
|
return ftdi_232bm_baud_base_to_divisor(baud, 48000000);
|
|
}
|
|
|
|
#define set_mctrl(port, set) update_mctrl((port), (set), 0)
|
|
#define clear_mctrl(port, clear) update_mctrl((port), 0, (clear))
|
|
|
|
static int update_mctrl(struct usb_serial_port *port, unsigned int set,
|
|
unsigned int clear)
|
|
{
|
|
struct ftdi_private *priv = usb_get_serial_port_data(port);
|
|
char *buf;
|
|
unsigned urb_value;
|
|
int rv;
|
|
|
|
if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
|
|
dbg("%s - DTR|RTS not being set|cleared", __func__);
|
|
return 0; /* no change */
|
|
}
|
|
|
|
buf = kmalloc(1, GFP_NOIO);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
clear &= ~set; /* 'set' takes precedence over 'clear' */
|
|
urb_value = 0;
|
|
if (clear & TIOCM_DTR)
|
|
urb_value |= FTDI_SIO_SET_DTR_LOW;
|
|
if (clear & TIOCM_RTS)
|
|
urb_value |= FTDI_SIO_SET_RTS_LOW;
|
|
if (set & TIOCM_DTR)
|
|
urb_value |= FTDI_SIO_SET_DTR_HIGH;
|
|
if (set & TIOCM_RTS)
|
|
urb_value |= FTDI_SIO_SET_RTS_HIGH;
|
|
rv = usb_control_msg(port->serial->dev,
|
|
usb_sndctrlpipe(port->serial->dev, 0),
|
|
FTDI_SIO_SET_MODEM_CTRL_REQUEST,
|
|
FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE,
|
|
urb_value, priv->interface,
|
|
buf, 0, WDR_TIMEOUT);
|
|
|
|
kfree(buf);
|
|
if (rv < 0) {
|
|
dbg("%s Error from MODEM_CTRL urb: DTR %s, RTS %s",
|
|
__func__,
|
|
(set & TIOCM_DTR) ? "HIGH" :
|
|
(clear & TIOCM_DTR) ? "LOW" : "unchanged",
|
|
(set & TIOCM_RTS) ? "HIGH" :
|
|
(clear & TIOCM_RTS) ? "LOW" : "unchanged");
|
|
} else {
|
|
dbg("%s - DTR %s, RTS %s", __func__,
|
|
(set & TIOCM_DTR) ? "HIGH" :
|
|
(clear & TIOCM_DTR) ? "LOW" : "unchanged",
|
|
(set & TIOCM_RTS) ? "HIGH" :
|
|
(clear & TIOCM_RTS) ? "LOW" : "unchanged");
|
|
/* FIXME: locking on last_dtr_rts */
|
|
priv->last_dtr_rts = (priv->last_dtr_rts & ~clear) | set;
|
|
}
|
|
return rv;
|
|
}
|
|
|
|
|
|
static __u32 get_ftdi_divisor(struct tty_struct *tty,
|
|
struct usb_serial_port *port)
|
|
{ /* get_ftdi_divisor */
|
|
struct ftdi_private *priv = usb_get_serial_port_data(port);
|
|
__u32 div_value = 0;
|
|
int div_okay = 1;
|
|
int baud;
|
|
|
|
/*
|
|
* The logic involved in setting the baudrate can be cleanly split into
|
|
* 3 steps.
|
|
* 1. Standard baud rates are set in tty->termios->c_cflag
|
|
* 2. If these are not enough, you can set any speed using alt_speed as
|
|
* follows:
|
|
* - set tty->termios->c_cflag speed to B38400
|
|
* - set your real speed in tty->alt_speed; it gets ignored when
|
|
* alt_speed==0, (or)
|
|
* - call TIOCSSERIAL ioctl with (struct serial_struct) set as
|
|
* follows:
|
|
* flags & ASYNC_SPD_MASK == ASYNC_SPD_[HI, VHI, SHI, WARP],
|
|
* this just sets alt_speed to (HI: 57600, VHI: 115200,
|
|
* SHI: 230400, WARP: 460800)
|
|
* ** Steps 1, 2 are done courtesy of tty_get_baud_rate
|
|
* 3. You can also set baud rate by setting custom divisor as follows
|
|
* - set tty->termios->c_cflag speed to B38400
|
|
* - call TIOCSSERIAL ioctl with (struct serial_struct) set as
|
|
* follows:
|
|
* o flags & ASYNC_SPD_MASK == ASYNC_SPD_CUST
|
|
* o custom_divisor set to baud_base / your_new_baudrate
|
|
* ** Step 3 is done courtesy of code borrowed from serial.c
|
|
* I should really spend some time and separate + move this common
|
|
* code to serial.c, it is replicated in nearly every serial driver
|
|
* you see.
|
|
*/
|
|
|
|
/* 1. Get the baud rate from the tty settings, this observes
|
|
alt_speed hack */
|
|
|
|
baud = tty_get_baud_rate(tty);
|
|
dbg("%s - tty_get_baud_rate reports speed %d", __func__, baud);
|
|
|
|
/* 2. Observe async-compatible custom_divisor hack, update baudrate
|
|
if needed */
|
|
|
|
if (baud == 38400 &&
|
|
((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
|
|
(priv->custom_divisor)) {
|
|
baud = priv->baud_base / priv->custom_divisor;
|
|
dbg("%s - custom divisor %d sets baud rate to %d",
|
|
__func__, priv->custom_divisor, baud);
|
|
}
|
|
|
|
/* 3. Convert baudrate to device-specific divisor */
|
|
|
|
if (!baud)
|
|
baud = 9600;
|
|
switch (priv->chip_type) {
|
|
case SIO: /* SIO chip */
|
|
switch (baud) {
|
|
case 300: div_value = ftdi_sio_b300; break;
|
|
case 600: div_value = ftdi_sio_b600; break;
|
|
case 1200: div_value = ftdi_sio_b1200; break;
|
|
case 2400: div_value = ftdi_sio_b2400; break;
|
|
case 4800: div_value = ftdi_sio_b4800; break;
|
|
case 9600: div_value = ftdi_sio_b9600; break;
|
|
case 19200: div_value = ftdi_sio_b19200; break;
|
|
case 38400: div_value = ftdi_sio_b38400; break;
|
|
case 57600: div_value = ftdi_sio_b57600; break;
|
|
case 115200: div_value = ftdi_sio_b115200; break;
|
|
} /* baud */
|
|
if (div_value == 0) {
|
|
dbg("%s - Baudrate (%d) requested is not supported",
|
|
__func__, baud);
|
|
div_value = ftdi_sio_b9600;
|
|
baud = 9600;
|
|
div_okay = 0;
|
|
}
|
|
break;
|
|
case FT8U232AM: /* 8U232AM chip */
|
|
if (baud <= 3000000) {
|
|
div_value = ftdi_232am_baud_to_divisor(baud);
|
|
} else {
|
|
dbg("%s - Baud rate too high!", __func__);
|
|
baud = 9600;
|
|
div_value = ftdi_232am_baud_to_divisor(9600);
|
|
div_okay = 0;
|
|
}
|
|
break;
|
|
case FT232BM: /* FT232BM chip */
|
|
case FT2232C: /* FT2232C chip */
|
|
case FT232RL:
|
|
if (baud <= 3000000) {
|
|
div_value = ftdi_232bm_baud_to_divisor(baud);
|
|
} else {
|
|
dbg("%s - Baud rate too high!", __func__);
|
|
div_value = ftdi_232bm_baud_to_divisor(9600);
|
|
div_okay = 0;
|
|
baud = 9600;
|
|
}
|
|
break;
|
|
} /* priv->chip_type */
|
|
|
|
if (div_okay) {
|
|
dbg("%s - Baud rate set to %d (divisor 0x%lX) on chip %s",
|
|
__func__, baud, (unsigned long)div_value,
|
|
ftdi_chip_name[priv->chip_type]);
|
|
}
|
|
|
|
tty_encode_baud_rate(tty, baud, baud);
|
|
return div_value;
|
|
}
|
|
|
|
static int change_speed(struct tty_struct *tty, struct usb_serial_port *port)
|
|
{
|
|
struct ftdi_private *priv = usb_get_serial_port_data(port);
|
|
char *buf;
|
|
__u16 urb_value;
|
|
__u16 urb_index;
|
|
__u32 urb_index_value;
|
|
int rv;
|
|
|
|
buf = kmalloc(1, GFP_NOIO);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
urb_index_value = get_ftdi_divisor(tty, port);
|
|
urb_value = (__u16)urb_index_value;
|
|
urb_index = (__u16)(urb_index_value >> 16);
|
|
if (priv->interface) { /* FT2232C */
|
|
urb_index = (__u16)((urb_index << 8) | priv->interface);
|
|
}
|
|
|
|
rv = usb_control_msg(port->serial->dev,
|
|
usb_sndctrlpipe(port->serial->dev, 0),
|
|
FTDI_SIO_SET_BAUDRATE_REQUEST,
|
|
FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE,
|
|
urb_value, urb_index,
|
|
buf, 0, WDR_SHORT_TIMEOUT);
|
|
|
|
kfree(buf);
|
|
return rv;
|
|
}
|
|
|
|
|
|
|
|
static int get_serial_info(struct usb_serial_port *port,
|
|
struct serial_struct __user *retinfo)
|
|
{
|
|
struct ftdi_private *priv = usb_get_serial_port_data(port);
|
|
struct serial_struct tmp;
|
|
|
|
if (!retinfo)
|
|
return -EFAULT;
|
|
memset(&tmp, 0, sizeof(tmp));
|
|
tmp.flags = priv->flags;
|
|
tmp.baud_base = priv->baud_base;
|
|
tmp.custom_divisor = priv->custom_divisor;
|
|
if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
|
|
return -EFAULT;
|
|
return 0;
|
|
} /* get_serial_info */
|
|
|
|
|
|
static int set_serial_info(struct tty_struct *tty,
|
|
struct usb_serial_port *port, struct serial_struct __user *newinfo)
|
|
{ /* set_serial_info */
|
|
struct ftdi_private *priv = usb_get_serial_port_data(port);
|
|
struct serial_struct new_serial;
|
|
struct ftdi_private old_priv;
|
|
|
|
if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
|
|
return -EFAULT;
|
|
|
|
lock_kernel();
|
|
old_priv = *priv;
|
|
|
|
/* Do error checking and permission checking */
|
|
|
|
if (!capable(CAP_SYS_ADMIN)) {
|
|
if (((new_serial.flags & ~ASYNC_USR_MASK) !=
|
|
(priv->flags & ~ASYNC_USR_MASK))) {
|
|
unlock_kernel();
|
|
return -EPERM;
|
|
}
|
|
priv->flags = ((priv->flags & ~ASYNC_USR_MASK) |
|
|
(new_serial.flags & ASYNC_USR_MASK));
|
|
priv->custom_divisor = new_serial.custom_divisor;
|
|
goto check_and_exit;
|
|
}
|
|
|
|
if ((new_serial.baud_base != priv->baud_base) &&
|
|
(new_serial.baud_base < 9600)) {
|
|
unlock_kernel();
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Make the changes - these are privileged changes! */
|
|
|
|
priv->flags = ((priv->flags & ~ASYNC_FLAGS) |
|
|
(new_serial.flags & ASYNC_FLAGS));
|
|
priv->custom_divisor = new_serial.custom_divisor;
|
|
|
|
tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
|
|
|
|
check_and_exit:
|
|
if ((old_priv.flags & ASYNC_SPD_MASK) !=
|
|
(priv->flags & ASYNC_SPD_MASK)) {
|
|
if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
|
|
tty->alt_speed = 57600;
|
|
else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
|
|
tty->alt_speed = 115200;
|
|
else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
|
|
tty->alt_speed = 230400;
|
|
else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
|
|
tty->alt_speed = 460800;
|
|
else
|
|
tty->alt_speed = 0;
|
|
}
|
|
if (((old_priv.flags & ASYNC_SPD_MASK) !=
|
|
(priv->flags & ASYNC_SPD_MASK)) ||
|
|
(((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
|
|
(old_priv.custom_divisor != priv->custom_divisor))) {
|
|
unlock_kernel();
|
|
change_speed(tty, port);
|
|
}
|
|
else
|
|
unlock_kernel();
|
|
return 0;
|
|
|
|
} /* set_serial_info */
|
|
|
|
|
|
/* Determine type of FTDI chip based on USB config and descriptor. */
|
|
static void ftdi_determine_type(struct usb_serial_port *port)
|
|
{
|
|
struct ftdi_private *priv = usb_get_serial_port_data(port);
|
|
struct usb_serial *serial = port->serial;
|
|
struct usb_device *udev = serial->dev;
|
|
unsigned version;
|
|
unsigned interfaces;
|
|
|
|
/* Assume it is not the original SIO device for now. */
|
|
priv->baud_base = 48000000 / 2;
|
|
priv->write_offset = 0;
|
|
|
|
version = le16_to_cpu(udev->descriptor.bcdDevice);
|
|
interfaces = udev->actconfig->desc.bNumInterfaces;
|
|
dbg("%s: bcdDevice = 0x%x, bNumInterfaces = %u", __func__,
|
|
version, interfaces);
|
|
if (interfaces > 1) {
|
|
int inter;
|
|
|
|
/* Multiple interfaces. Assume FT2232C. */
|
|
priv->chip_type = FT2232C;
|
|
/* Determine interface code. */
|
|
inter = serial->interface->altsetting->desc.bInterfaceNumber;
|
|
if (inter == 0)
|
|
priv->interface = PIT_SIOA;
|
|
else
|
|
priv->interface = PIT_SIOB;
|
|
/* BM-type devices have a bug where bcdDevice gets set
|
|
* to 0x200 when iSerialNumber is 0. */
|
|
if (version < 0x500) {
|
|
dbg("%s: something fishy - bcdDevice too low for multi-interface device",
|
|
__func__);
|
|
}
|
|
} else if (version < 0x200) {
|
|
/* Old device. Assume its the original SIO. */
|
|
priv->chip_type = SIO;
|
|
priv->baud_base = 12000000 / 16;
|
|
priv->write_offset = 1;
|
|
} else if (version < 0x400) {
|
|
/* Assume its an FT8U232AM (or FT8U245AM) */
|
|
/* (It might be a BM because of the iSerialNumber bug,
|
|
* but it will still work as an AM device.) */
|
|
priv->chip_type = FT8U232AM;
|
|
} else if (version < 0x600) {
|
|
/* Assume its an FT232BM (or FT245BM) */
|
|
priv->chip_type = FT232BM;
|
|
} else {
|
|
/* Assume its an FT232R */
|
|
priv->chip_type = FT232RL;
|
|
}
|
|
dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]);
|
|
}
|
|
|
|
|
|
/*
|
|
* ***************************************************************************
|
|
* Sysfs Attribute
|
|
* ***************************************************************************
|
|
*/
|
|
|
|
static ssize_t show_latency_timer(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct usb_serial_port *port = to_usb_serial_port(dev);
|
|
struct ftdi_private *priv = usb_get_serial_port_data(port);
|
|
struct usb_device *udev = port->serial->dev;
|
|
unsigned short latency = 0;
|
|
int rv = 0;
|
|
|
|
|
|
dbg("%s", __func__);
|
|
|
|
rv = usb_control_msg(udev,
|
|
usb_rcvctrlpipe(udev, 0),
|
|
FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
|
|
FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
|
|
0, priv->interface,
|
|
(char *) &latency, 1, WDR_TIMEOUT);
|
|
|
|
if (rv < 0) {
|
|
dev_err(dev, "Unable to read latency timer: %i\n", rv);
|
|
return -EIO;
|
|
}
|
|
return sprintf(buf, "%i\n", latency);
|
|
}
|
|
|
|
/* Write a new value of the latency timer, in units of milliseconds. */
|
|
static ssize_t store_latency_timer(struct device *dev,
|
|
struct device_attribute *attr, const char *valbuf,
|
|
size_t count)
|
|
{
|
|
struct usb_serial_port *port = to_usb_serial_port(dev);
|
|
struct ftdi_private *priv = usb_get_serial_port_data(port);
|
|
struct usb_device *udev = port->serial->dev;
|
|
char buf[1];
|
|
int v = simple_strtoul(valbuf, NULL, 10);
|
|
int rv = 0;
|
|
|
|
dbg("%s: setting latency timer = %i", __func__, v);
|
|
|
|
rv = usb_control_msg(udev,
|
|
usb_sndctrlpipe(udev, 0),
|
|
FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
|
|
FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
|
|
v, priv->interface,
|
|
buf, 0, WDR_TIMEOUT);
|
|
|
|
if (rv < 0) {
|
|
dev_err(dev, "Unable to write latency timer: %i\n", rv);
|
|
return -EIO;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
/* Write an event character directly to the FTDI register. The ASCII
|
|
value is in the low 8 bits, with the enable bit in the 9th bit. */
|
|
static ssize_t store_event_char(struct device *dev,
|
|
struct device_attribute *attr, const char *valbuf, size_t count)
|
|
{
|
|
struct usb_serial_port *port = to_usb_serial_port(dev);
|
|
struct ftdi_private *priv = usb_get_serial_port_data(port);
|
|
struct usb_device *udev = port->serial->dev;
|
|
char buf[1];
|
|
int v = simple_strtoul(valbuf, NULL, 10);
|
|
int rv = 0;
|
|
|
|
dbg("%s: setting event char = %i", __func__, v);
|
|
|
|
rv = usb_control_msg(udev,
|
|
usb_sndctrlpipe(udev, 0),
|
|
FTDI_SIO_SET_EVENT_CHAR_REQUEST,
|
|
FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE,
|
|
v, priv->interface,
|
|
buf, 0, WDR_TIMEOUT);
|
|
|
|
if (rv < 0) {
|
|
dbg("Unable to write event character: %i", rv);
|
|
return -EIO;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
static DEVICE_ATTR(latency_timer, S_IWUSR | S_IRUGO, show_latency_timer,
|
|
store_latency_timer);
|
|
static DEVICE_ATTR(event_char, S_IWUSR, NULL, store_event_char);
|
|
|
|
static int create_sysfs_attrs(struct usb_serial_port *port)
|
|
{
|
|
struct ftdi_private *priv = usb_get_serial_port_data(port);
|
|
int retval = 0;
|
|
|
|
dbg("%s", __func__);
|
|
|
|
/* XXX I've no idea if the original SIO supports the event_char
|
|
* sysfs parameter, so I'm playing it safe. */
|
|
if (priv->chip_type != SIO) {
|
|
dbg("sysfs attributes for %s", ftdi_chip_name[priv->chip_type]);
|
|
retval = device_create_file(&port->dev, &dev_attr_event_char);
|
|
if ((!retval) &&
|
|
(priv->chip_type == FT232BM ||
|
|
priv->chip_type == FT2232C ||
|
|
priv->chip_type == FT232RL)) {
|
|
retval = device_create_file(&port->dev,
|
|
&dev_attr_latency_timer);
|
|
}
|
|
}
|
|
return retval;
|
|
}
|
|
|
|
static void remove_sysfs_attrs(struct usb_serial_port *port)
|
|
{
|
|
struct ftdi_private *priv = usb_get_serial_port_data(port);
|
|
|
|
dbg("%s", __func__);
|
|
|
|
/* XXX see create_sysfs_attrs */
|
|
if (priv->chip_type != SIO) {
|
|
device_remove_file(&port->dev, &dev_attr_event_char);
|
|
if (priv->chip_type == FT232BM ||
|
|
priv->chip_type == FT2232C ||
|
|
priv->chip_type == FT232RL) {
|
|
device_remove_file(&port->dev, &dev_attr_latency_timer);
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
/*
|
|
* ***************************************************************************
|
|
* FTDI driver specific functions
|
|
* ***************************************************************************
|
|
*/
|
|
|
|
/* Probe function to check for special devices */
|
|
static int ftdi_sio_probe(struct usb_serial *serial,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct ftdi_sio_quirk *quirk =
|
|
(struct ftdi_sio_quirk *)id->driver_info;
|
|
|
|
if (quirk && quirk->probe) {
|
|
int ret = quirk->probe(serial);
|
|
if (ret != 0)
|
|
return ret;
|
|
}
|
|
|
|
usb_set_serial_data(serial, (void *)id->driver_info);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ftdi_sio_port_probe(struct usb_serial_port *port)
|
|
{
|
|
struct ftdi_private *priv;
|
|
struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial);
|
|
|
|
|
|
dbg("%s", __func__);
|
|
|
|
priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL);
|
|
if (!priv) {
|
|
dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__,
|
|
sizeof(struct ftdi_private));
|
|
return -ENOMEM;
|
|
}
|
|
|
|
spin_lock_init(&priv->rx_lock);
|
|
spin_lock_init(&priv->tx_lock);
|
|
init_waitqueue_head(&priv->delta_msr_wait);
|
|
/* This will push the characters through immediately rather
|
|
than queue a task to deliver them */
|
|
priv->flags = ASYNC_LOW_LATENCY;
|
|
|
|
if (quirk && quirk->port_probe)
|
|
quirk->port_probe(priv);
|
|
|
|
/* Increase the size of read buffers */
|
|
kfree(port->bulk_in_buffer);
|
|
port->bulk_in_buffer = kmalloc(BUFSZ, GFP_KERNEL);
|
|
if (!port->bulk_in_buffer) {
|
|
kfree(priv);
|
|
return -ENOMEM;
|
|
}
|
|
if (port->read_urb) {
|
|
port->read_urb->transfer_buffer = port->bulk_in_buffer;
|
|
port->read_urb->transfer_buffer_length = BUFSZ;
|
|
}
|
|
|
|
INIT_DELAYED_WORK(&priv->rx_work, ftdi_process_read);
|
|
priv->port = port;
|
|
|
|
/* Free port's existing write urb and transfer buffer. */
|
|
if (port->write_urb) {
|
|
usb_free_urb(port->write_urb);
|
|
port->write_urb = NULL;
|
|
}
|
|
kfree(port->bulk_out_buffer);
|
|
port->bulk_out_buffer = NULL;
|
|
|
|
usb_set_serial_port_data(port, priv);
|
|
|
|
ftdi_determine_type(port);
|
|
create_sysfs_attrs(port);
|
|
return 0;
|
|
}
|
|
|
|
/* Setup for the USB-UIRT device, which requires hardwired
|
|
* baudrate (38400 gets mapped to 312500) */
|
|
/* Called from usbserial:serial_probe */
|
|
static void ftdi_USB_UIRT_setup(struct ftdi_private *priv)
|
|
{
|
|
dbg("%s", __func__);
|
|
|
|
priv->flags |= ASYNC_SPD_CUST;
|
|
priv->custom_divisor = 77;
|
|
priv->force_baud = 38400;
|
|
} /* ftdi_USB_UIRT_setup */
|
|
|
|
/* Setup for the HE-TIRA1 device, which requires hardwired
|
|
* baudrate (38400 gets mapped to 100000) and RTS-CTS enabled. */
|
|
|
|
static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv)
|
|
{
|
|
dbg("%s", __func__);
|
|
|
|
priv->flags |= ASYNC_SPD_CUST;
|
|
priv->custom_divisor = 240;
|
|
priv->force_baud = 38400;
|
|
priv->force_rtscts = 1;
|
|
} /* ftdi_HE_TIRA1_setup */
|
|
|
|
/*
|
|
* First port on JTAG adaptors such as Olimex arm-usb-ocd or the FIC/OpenMoko
|
|
* Neo1973 Debug Board is reserved for JTAG interface and can be accessed from
|
|
* userspace using openocd.
|
|
*/
|
|
static int ftdi_jtag_probe(struct usb_serial *serial)
|
|
{
|
|
struct usb_device *udev = serial->dev;
|
|
struct usb_interface *interface = serial->interface;
|
|
|
|
dbg("%s", __func__);
|
|
|
|
if (interface == udev->actconfig->interface[0]) {
|
|
dev_info(&udev->dev,
|
|
"Ignoring serial port reserved for JTAG\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The Matrix Orbital VK204-25-USB has an invalid IN endpoint.
|
|
* We have to correct it if we want to read from it.
|
|
*/
|
|
static int ftdi_mtxorb_hack_setup(struct usb_serial *serial)
|
|
{
|
|
struct usb_host_endpoint *ep = serial->dev->ep_in[1];
|
|
struct usb_endpoint_descriptor *ep_desc = &ep->desc;
|
|
|
|
if (ep->enabled && ep_desc->wMaxPacketSize == 0) {
|
|
ep_desc->wMaxPacketSize = cpu_to_le16(0x40);
|
|
dev_info(&serial->dev->dev,
|
|
"Fixing invalid wMaxPacketSize on read pipe\n");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ftdi_shutdown is called from usbserial:usb_serial_disconnect
|
|
* it is called when the usb device is disconnected
|
|
*
|
|
* usbserial:usb_serial_disconnect
|
|
* calls __serial_close for each open of the port
|
|
* shutdown is called then (ie ftdi_shutdown)
|
|
*/
|
|
static void ftdi_shutdown(struct usb_serial *serial)
|
|
{
|
|
dbg("%s", __func__);
|
|
}
|
|
|
|
static int ftdi_sio_port_remove(struct usb_serial_port *port)
|
|
{
|
|
struct ftdi_private *priv = usb_get_serial_port_data(port);
|
|
|
|
dbg("%s", __func__);
|
|
|
|
remove_sysfs_attrs(port);
|
|
|
|
/* all open ports are closed at this point
|
|
* (by usbserial.c:__serial_close, which calls ftdi_close)
|
|
*/
|
|
|
|
if (priv) {
|
|
usb_set_serial_port_data(port, NULL);
|
|
kfree(priv);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ftdi_open(struct tty_struct *tty,
|
|
struct usb_serial_port *port, struct file *filp)
|
|
{ /* ftdi_open */
|
|
struct usb_device *dev = port->serial->dev;
|
|
struct ftdi_private *priv = usb_get_serial_port_data(port);
|
|
unsigned long flags;
|
|
|
|
int result = 0;
|
|
char buf[1]; /* Needed for the usb_control_msg I think */
|
|
|
|
dbg("%s", __func__);
|
|
|
|
spin_lock_irqsave(&priv->tx_lock, flags);
|
|
priv->tx_bytes = 0;
|
|
spin_unlock_irqrestore(&priv->tx_lock, flags);
|
|
spin_lock_irqsave(&priv->rx_lock, flags);
|
|
priv->rx_bytes = 0;
|
|
spin_unlock_irqrestore(&priv->rx_lock, flags);
|
|
|
|
if (tty)
|
|
tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
|
|
|
|
/* No error checking for this (will get errors later anyway) */
|
|
/* See ftdi_sio.h for description of what is reset */
|
|
usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
|
|
FTDI_SIO_RESET_REQUEST, FTDI_SIO_RESET_REQUEST_TYPE,
|
|
FTDI_SIO_RESET_SIO,
|
|
priv->interface, buf, 0, WDR_TIMEOUT);
|
|
|
|
/* Termios defaults are set by usb_serial_init. We don't change
|
|
port->tty->termios - this would lose speed settings, etc.
|
|
This is same behaviour as serial.c/rs_open() - Kuba */
|
|
|
|
/* ftdi_set_termios will send usb control messages */
|
|
if (tty)
|
|
ftdi_set_termios(tty, port, tty->termios);
|
|
|
|
/* FIXME: Flow control might be enabled, so it should be checked -
|
|
we have no control of defaults! */
|
|
/* Turn on RTS and DTR since we are not flow controlling by default */
|
|
set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
|
|
|
|
/* Not throttled */
|
|
spin_lock_irqsave(&priv->rx_lock, flags);
|
|
priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
|
|
spin_unlock_irqrestore(&priv->rx_lock, flags);
|
|
|
|
/* Start reading from the device */
|
|
priv->rx_processed = 0;
|
|
usb_fill_bulk_urb(port->read_urb, dev,
|
|
usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress),
|
|
port->read_urb->transfer_buffer,
|
|
port->read_urb->transfer_buffer_length,
|
|
ftdi_read_bulk_callback, port);
|
|
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
|
|
if (result)
|
|
dev_err(&port->dev,
|
|
"%s - failed submitting read urb, error %d\n",
|
|
__func__, result);
|
|
|
|
|
|
return result;
|
|
} /* ftdi_open */
|
|
|
|
|
|
|
|
/*
|
|
* usbserial:__serial_close only calls ftdi_close if the point is open
|
|
*
|
|
* This only gets called when it is the last close
|
|
*
|
|
*
|
|
*/
|
|
|
|
static void ftdi_close(struct tty_struct *tty,
|
|
struct usb_serial_port *port, struct file *filp)
|
|
{ /* ftdi_close */
|
|
unsigned int c_cflag = tty->termios->c_cflag;
|
|
struct ftdi_private *priv = usb_get_serial_port_data(port);
|
|
char buf[1];
|
|
|
|
dbg("%s", __func__);
|
|
|
|
mutex_lock(&port->serial->disc_mutex);
|
|
if (c_cflag & HUPCL && !port->serial->disconnected) {
|
|
/* Disable flow control */
|
|
if (usb_control_msg(port->serial->dev,
|
|
usb_sndctrlpipe(port->serial->dev, 0),
|
|
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
|
|
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
|
|
0, priv->interface, buf, 0,
|
|
WDR_TIMEOUT) < 0) {
|
|
dev_err(&port->dev, "error from flowcontrol urb\n");
|
|
}
|
|
|
|
/* drop RTS and DTR */
|
|
clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
|
|
} /* Note change no line if hupcl is off */
|
|
mutex_unlock(&port->serial->disc_mutex);
|
|
|
|
/* cancel any scheduled reading */
|
|
cancel_delayed_work(&priv->rx_work);
|
|
flush_scheduled_work();
|
|
|
|
/* shutdown our bulk read */
|
|
usb_kill_urb(port->read_urb);
|
|
} /* ftdi_close */
|
|
|
|
|
|
|
|
/* The SIO requires the first byte to have:
|
|
* B0 1
|
|
* B1 0
|
|
* B2..7 length of message excluding byte 0
|
|
*
|
|
* The new devices do not require this byte
|
|
*/
|
|
static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
|
|
const unsigned char *buf, int count)
|
|
{ /* ftdi_write */
|
|
struct ftdi_private *priv = usb_get_serial_port_data(port);
|
|
struct urb *urb;
|
|
unsigned char *buffer;
|
|
int data_offset ; /* will be 1 for the SIO and 0 otherwise */
|
|
int status;
|
|
int transfer_size;
|
|
unsigned long flags;
|
|
|
|
dbg("%s port %d, %d bytes", __func__, port->number, count);
|
|
|
|
if (count == 0) {
|
|
dbg("write request of 0 bytes");
|
|
return 0;
|
|
}
|
|
spin_lock_irqsave(&priv->tx_lock, flags);
|
|
if (priv->tx_outstanding_urbs > URB_UPPER_LIMIT) {
|
|
spin_unlock_irqrestore(&priv->tx_lock, flags);
|
|
dbg("%s - write limit hit\n", __func__);
|
|
return 0;
|
|
}
|
|
priv->tx_outstanding_urbs++;
|
|
spin_unlock_irqrestore(&priv->tx_lock, flags);
|
|
|
|
data_offset = priv->write_offset;
|
|
dbg("data_offset set to %d", data_offset);
|
|
|
|
/* Determine total transfer size */
|
|
transfer_size = count;
|
|
if (data_offset > 0) {
|
|
/* Original sio needs control bytes too... */
|
|
transfer_size += (data_offset *
|
|
((count + (PKTSZ - 1 - data_offset)) /
|
|
(PKTSZ - data_offset)));
|
|
}
|
|
|
|
buffer = kmalloc(transfer_size, GFP_ATOMIC);
|
|
if (!buffer) {
|
|
dev_err(&port->dev,
|
|
"%s ran out of kernel memory for urb ...\n", __func__);
|
|
count = -ENOMEM;
|
|
goto error_no_buffer;
|
|
}
|
|
|
|
urb = usb_alloc_urb(0, GFP_ATOMIC);
|
|
if (!urb) {
|
|
dev_err(&port->dev, "%s - no more free urbs\n", __func__);
|
|
count = -ENOMEM;
|
|
goto error_no_urb;
|
|
}
|
|
|
|
/* Copy data */
|
|
if (data_offset > 0) {
|
|
/* Original sio requires control byte at start of
|
|
each packet. */
|
|
int user_pktsz = PKTSZ - data_offset;
|
|
int todo = count;
|
|
unsigned char *first_byte = buffer;
|
|
const unsigned char *current_position = buf;
|
|
|
|
while (todo > 0) {
|
|
if (user_pktsz > todo)
|
|
user_pktsz = todo;
|
|
/* Write the control byte at the front of the packet*/
|
|
*first_byte = 1 | ((user_pktsz) << 2);
|
|
/* Copy data for packet */
|
|
memcpy(first_byte + data_offset,
|
|
current_position, user_pktsz);
|
|
first_byte += user_pktsz + data_offset;
|
|
current_position += user_pktsz;
|
|
todo -= user_pktsz;
|
|
}
|
|
} else {
|
|
/* No control byte required. */
|
|
/* Copy in the data to send */
|
|
memcpy(buffer, buf, count);
|
|
}
|
|
|
|
usb_serial_debug_data(debug, &port->dev, __func__,
|
|
transfer_size, buffer);
|
|
|
|
/* fill the buffer and send it */
|
|
usb_fill_bulk_urb(urb, port->serial->dev,
|
|
usb_sndbulkpipe(port->serial->dev,
|
|
port->bulk_out_endpointAddress),
|
|
buffer, transfer_size,
|
|
ftdi_write_bulk_callback, port);
|
|
|
|
status = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (status) {
|
|
dev_err(&port->dev,
|
|
"%s - failed submitting write urb, error %d\n",
|
|
__func__, status);
|
|
count = status;
|
|
goto error;
|
|
} else {
|
|
spin_lock_irqsave(&priv->tx_lock, flags);
|
|
priv->tx_outstanding_bytes += count;
|
|
priv->tx_bytes += count;
|
|
spin_unlock_irqrestore(&priv->tx_lock, flags);
|
|
}
|
|
|
|
/* we are done with this urb, so let the host driver
|
|
* really free it when it is finished with it */
|
|
usb_free_urb(urb);
|
|
|
|
dbg("%s write returning: %d", __func__, count);
|
|
return count;
|
|
error:
|
|
usb_free_urb(urb);
|
|
error_no_urb:
|
|
kfree(buffer);
|
|
error_no_buffer:
|
|
spin_lock_irqsave(&priv->tx_lock, flags);
|
|
priv->tx_outstanding_urbs--;
|
|
spin_unlock_irqrestore(&priv->tx_lock, flags);
|
|
return count;
|
|
} /* ftdi_write */
|
|
|
|
|
|
/* This function may get called when the device is closed */
|
|
|
|
static void ftdi_write_bulk_callback(struct urb *urb)
|
|
{
|
|
unsigned long flags;
|
|
struct usb_serial_port *port = urb->context;
|
|
struct ftdi_private *priv;
|
|
int data_offset; /* will be 1 for the SIO and 0 otherwise */
|
|
unsigned long countback;
|
|
int status = urb->status;
|
|
|
|
/* free up the transfer buffer, as usb_free_urb() does not do this */
|
|
kfree(urb->transfer_buffer);
|
|
|
|
dbg("%s - port %d", __func__, port->number);
|
|
|
|
if (status) {
|
|
dbg("nonzero write bulk status received: %d", status);
|
|
return;
|
|
}
|
|
|
|
priv = usb_get_serial_port_data(port);
|
|
if (!priv) {
|
|
dbg("%s - bad port private data pointer - exiting", __func__);
|
|
return;
|
|
}
|
|
/* account for transferred data */
|
|
countback = urb->actual_length;
|
|
data_offset = priv->write_offset;
|
|
if (data_offset > 0) {
|
|
/* Subtract the control bytes */
|
|
countback -= (data_offset * DIV_ROUND_UP(countback, PKTSZ));
|
|
}
|
|
spin_lock_irqsave(&priv->tx_lock, flags);
|
|
--priv->tx_outstanding_urbs;
|
|
priv->tx_outstanding_bytes -= countback;
|
|
spin_unlock_irqrestore(&priv->tx_lock, flags);
|
|
|
|
usb_serial_port_softint(port);
|
|
} /* ftdi_write_bulk_callback */
|
|
|
|
|
|
static int ftdi_write_room(struct tty_struct *tty)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
struct ftdi_private *priv = usb_get_serial_port_data(port);
|
|
int room;
|
|
unsigned long flags;
|
|
|
|
dbg("%s - port %d", __func__, port->number);
|
|
|
|
spin_lock_irqsave(&priv->tx_lock, flags);
|
|
if (priv->tx_outstanding_urbs < URB_UPPER_LIMIT) {
|
|
/*
|
|
* We really can take anything the user throws at us
|
|
* but let's pick a nice big number to tell the tty
|
|
* layer that we have lots of free space
|
|
*/
|
|
room = 2048;
|
|
} else {
|
|
room = 0;
|
|
}
|
|
spin_unlock_irqrestore(&priv->tx_lock, flags);
|
|
return room;
|
|
}
|
|
|
|
static int ftdi_chars_in_buffer(struct tty_struct *tty)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
struct ftdi_private *priv = usb_get_serial_port_data(port);
|
|
int buffered;
|
|
unsigned long flags;
|
|
|
|
dbg("%s - port %d", __func__, port->number);
|
|
|
|
spin_lock_irqsave(&priv->tx_lock, flags);
|
|
buffered = (int)priv->tx_outstanding_bytes;
|
|
spin_unlock_irqrestore(&priv->tx_lock, flags);
|
|
if (buffered < 0) {
|
|
dev_err(&port->dev, "%s outstanding tx bytes is negative!\n",
|
|
__func__);
|
|
buffered = 0;
|
|
}
|
|
return buffered;
|
|
}
|
|
|
|
static void ftdi_read_bulk_callback(struct urb *urb)
|
|
{
|
|
struct usb_serial_port *port = urb->context;
|
|
struct tty_struct *tty;
|
|
struct ftdi_private *priv;
|
|
unsigned long countread;
|
|
unsigned long flags;
|
|
int status = urb->status;
|
|
|
|
if (urb->number_of_packets > 0) {
|
|
dev_err(&port->dev, "%s transfer_buffer_length %d "
|
|
"actual_length %d number of packets %d\n", __func__,
|
|
urb->transfer_buffer_length,
|
|
urb->actual_length, urb->number_of_packets);
|
|
dev_err(&port->dev, "%s transfer_flags %x\n", __func__,
|
|
urb->transfer_flags);
|
|
}
|
|
|
|
dbg("%s - port %d", __func__, port->number);
|
|
|
|
if (port->port.count <= 0)
|
|
return;
|
|
|
|
tty = tty_port_tty_get(&port->port);
|
|
if (!tty) {
|
|
dbg("%s - bad tty pointer - exiting", __func__);
|
|
return;
|
|
}
|
|
|
|
priv = usb_get_serial_port_data(port);
|
|
if (!priv) {
|
|
dbg("%s - bad port private data pointer - exiting", __func__);
|
|
goto out;
|
|
}
|
|
|
|
if (urb != port->read_urb)
|
|
dev_err(&port->dev, "%s - Not my urb!\n", __func__);
|
|
|
|
if (status) {
|
|
/* This will happen at close every time so it is a dbg not an
|
|
err */
|
|
dbg("(this is ok on close) nonzero read bulk status received: %d", status);
|
|
goto out;
|
|
}
|
|
|
|
/* count data bytes, but not status bytes */
|
|
countread = urb->actual_length;
|
|
countread -= 2 * DIV_ROUND_UP(countread, PKTSZ);
|
|
spin_lock_irqsave(&priv->rx_lock, flags);
|
|
priv->rx_bytes += countread;
|
|
spin_unlock_irqrestore(&priv->rx_lock, flags);
|
|
|
|
ftdi_process_read(&priv->rx_work.work);
|
|
out:
|
|
tty_kref_put(tty);
|
|
} /* ftdi_read_bulk_callback */
|
|
|
|
|
|
static void ftdi_process_read(struct work_struct *work)
|
|
{ /* ftdi_process_read */
|
|
struct ftdi_private *priv =
|
|
container_of(work, struct ftdi_private, rx_work.work);
|
|
struct usb_serial_port *port = priv->port;
|
|
struct urb *urb;
|
|
struct tty_struct *tty;
|
|
char error_flag;
|
|
unsigned char *data;
|
|
|
|
int i;
|
|
int result;
|
|
int need_flip;
|
|
int packet_offset;
|
|
unsigned long flags;
|
|
|
|
dbg("%s - port %d", __func__, port->number);
|
|
|
|
if (port->port.count <= 0)
|
|
return;
|
|
|
|
tty = tty_port_tty_get(&port->port);
|
|
if (!tty) {
|
|
dbg("%s - bad tty pointer - exiting", __func__);
|
|
return;
|
|
}
|
|
|
|
priv = usb_get_serial_port_data(port);
|
|
if (!priv) {
|
|
dbg("%s - bad port private data pointer - exiting", __func__);
|
|
goto out;
|
|
}
|
|
|
|
urb = port->read_urb;
|
|
if (!urb) {
|
|
dbg("%s - bad read_urb pointer - exiting", __func__);
|
|
goto out;
|
|
}
|
|
|
|
data = urb->transfer_buffer;
|
|
|
|
if (priv->rx_processed) {
|
|
dbg("%s - already processed: %d bytes, %d remain", __func__,
|
|
priv->rx_processed,
|
|
urb->actual_length - priv->rx_processed);
|
|
} else {
|
|
/* The first two bytes of every read packet are status */
|
|
if (urb->actual_length > 2)
|
|
usb_serial_debug_data(debug, &port->dev, __func__,
|
|
urb->actual_length, data);
|
|
else
|
|
dbg("Status only: %03oo %03oo", data[0], data[1]);
|
|
}
|
|
|
|
|
|
/* TO DO -- check for hung up line and handle appropriately: */
|
|
/* send hangup */
|
|
/* See acm.c - you do a tty_hangup - eg tty_hangup(tty) */
|
|
/* if CD is dropped and the line is not CLOCAL then we should hangup */
|
|
|
|
need_flip = 0;
|
|
for (packet_offset = priv->rx_processed;
|
|
packet_offset < urb->actual_length; packet_offset += PKTSZ) {
|
|
int length;
|
|
|
|
/* Compare new line status to the old one, signal if different/
|
|
N.B. packet may be processed more than once, but differences
|
|
are only processed once. */
|
|
char new_status = data[packet_offset + 0] &
|
|
FTDI_STATUS_B0_MASK;
|
|
if (new_status != priv->prev_status) {
|
|
priv->diff_status |=
|
|
new_status ^ priv->prev_status;
|
|
wake_up_interruptible(&priv->delta_msr_wait);
|
|
priv->prev_status = new_status;
|
|
}
|
|
|
|
length = min_t(u32, PKTSZ, urb->actual_length-packet_offset)-2;
|
|
if (length < 0) {
|
|
dev_err(&port->dev, "%s - bad packet length: %d\n",
|
|
__func__, length+2);
|
|
length = 0;
|
|
}
|
|
|
|
if (priv->rx_flags & THROTTLED) {
|
|
dbg("%s - throttled", __func__);
|
|
break;
|
|
}
|
|
if (tty_buffer_request_room(tty, length) < length) {
|
|
/* break out & wait for throttling/unthrottling to
|
|
happen */
|
|
dbg("%s - receive room low", __func__);
|
|
break;
|
|
}
|
|
|
|
/* Handle errors and break */
|
|
error_flag = TTY_NORMAL;
|
|
/* Although the device uses a bitmask and hence can have
|
|
multiple errors on a packet - the order here sets the
|
|
priority the error is returned to the tty layer */
|
|
|
|
if (data[packet_offset+1] & FTDI_RS_OE) {
|
|
error_flag = TTY_OVERRUN;
|
|
dbg("OVERRRUN error");
|
|
}
|
|
if (data[packet_offset+1] & FTDI_RS_BI) {
|
|
error_flag = TTY_BREAK;
|
|
dbg("BREAK received");
|
|
}
|
|
if (data[packet_offset+1] & FTDI_RS_PE) {
|
|
error_flag = TTY_PARITY;
|
|
dbg("PARITY error");
|
|
}
|
|
if (data[packet_offset+1] & FTDI_RS_FE) {
|
|
error_flag = TTY_FRAME;
|
|
dbg("FRAMING error");
|
|
}
|
|
if (length > 0) {
|
|
for (i = 2; i < length+2; i++) {
|
|
/* Note that the error flag is duplicated for
|
|
every character received since we don't know
|
|
which character it applied to */
|
|
tty_insert_flip_char(tty,
|
|
data[packet_offset + i], error_flag);
|
|
}
|
|
need_flip = 1;
|
|
}
|
|
|
|
#ifdef NOT_CORRECT_BUT_KEEPING_IT_FOR_NOW
|
|
/* if a parity error is detected you get status packets forever
|
|
until a character is sent without a parity error.
|
|
This doesn't work well since the application receives a
|
|
never ending stream of bad data - even though new data
|
|
hasn't been sent. Therefore I (bill) have taken this out.
|
|
However - this might make sense for framing errors and so on
|
|
so I am leaving the code in for now.
|
|
*/
|
|
else {
|
|
if (error_flag != TTY_NORMAL) {
|
|
dbg("error_flag is not normal");
|
|
/* In this case it is just status - if that is
|
|
an error send a bad character */
|
|
if (tty->flip.count >= TTY_FLIPBUF_SIZE)
|
|
tty_flip_buffer_push(tty);
|
|
tty_insert_flip_char(tty, 0xff, error_flag);
|
|
need_flip = 1;
|
|
}
|
|
}
|
|
#endif
|
|
} /* "for(packet_offset=0..." */
|
|
|
|
/* Low latency */
|
|
if (need_flip)
|
|
tty_flip_buffer_push(tty);
|
|
|
|
if (packet_offset < urb->actual_length) {
|
|
/* not completely processed - record progress */
|
|
priv->rx_processed = packet_offset;
|
|
dbg("%s - incomplete, %d bytes processed, %d remain",
|
|
__func__, packet_offset,
|
|
urb->actual_length - packet_offset);
|
|
/* check if we were throttled while processing */
|
|
spin_lock_irqsave(&priv->rx_lock, flags);
|
|
if (priv->rx_flags & THROTTLED) {
|
|
priv->rx_flags |= ACTUALLY_THROTTLED;
|
|
spin_unlock_irqrestore(&priv->rx_lock, flags);
|
|
dbg("%s - deferring remainder until unthrottled",
|
|
__func__);
|
|
goto out;
|
|
}
|
|
spin_unlock_irqrestore(&priv->rx_lock, flags);
|
|
/* if the port is closed stop trying to read */
|
|
if (port->port.count > 0)
|
|
/* delay processing of remainder */
|
|
schedule_delayed_work(&priv->rx_work, 1);
|
|
else
|
|
dbg("%s - port is closed", __func__);
|
|
goto out;
|
|
}
|
|
|
|
/* urb is completely processed */
|
|
priv->rx_processed = 0;
|
|
|
|
/* if the port is closed stop trying to read */
|
|
if (port->port.count > 0) {
|
|
/* Continue trying to always read */
|
|
usb_fill_bulk_urb(port->read_urb, port->serial->dev,
|
|
usb_rcvbulkpipe(port->serial->dev,
|
|
port->bulk_in_endpointAddress),
|
|
port->read_urb->transfer_buffer,
|
|
port->read_urb->transfer_buffer_length,
|
|
ftdi_read_bulk_callback, port);
|
|
|
|
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
|
|
if (result)
|
|
dev_err(&port->dev,
|
|
"%s - failed resubmitting read urb, error %d\n",
|
|
__func__, result);
|
|
}
|
|
out:
|
|
tty_kref_put(tty);
|
|
} /* ftdi_process_read */
|
|
|
|
|
|
static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
struct ftdi_private *priv = usb_get_serial_port_data(port);
|
|
__u16 urb_value = 0;
|
|
char buf[1];
|
|
|
|
/* break_state = -1 to turn on break, and 0 to turn off break */
|
|
/* see drivers/char/tty_io.c to see it used */
|
|
/* last_set_data_urb_value NEVER has the break bit set in it */
|
|
|
|
if (break_state)
|
|
urb_value = priv->last_set_data_urb_value | FTDI_SIO_SET_BREAK;
|
|
else
|
|
urb_value = priv->last_set_data_urb_value;
|
|
|
|
if (usb_control_msg(port->serial->dev,
|
|
usb_sndctrlpipe(port->serial->dev, 0),
|
|
FTDI_SIO_SET_DATA_REQUEST,
|
|
FTDI_SIO_SET_DATA_REQUEST_TYPE,
|
|
urb_value , priv->interface,
|
|
buf, 0, WDR_TIMEOUT) < 0) {
|
|
dev_err(&port->dev, "%s FAILED to enable/disable break state "
|
|
"(state was %d)\n", __func__, break_state);
|
|
}
|
|
|
|
dbg("%s break state is %d - urb is %d", __func__,
|
|
break_state, urb_value);
|
|
|
|
}
|
|
|
|
|
|
/* old_termios contains the original termios settings and tty->termios contains
|
|
* the new setting to be used
|
|
* WARNING: set_termios calls this with old_termios in kernel space
|
|
*/
|
|
|
|
static void ftdi_set_termios(struct tty_struct *tty,
|
|
struct usb_serial_port *port, struct ktermios *old_termios)
|
|
{ /* ftdi_termios */
|
|
struct usb_device *dev = port->serial->dev;
|
|
struct ftdi_private *priv = usb_get_serial_port_data(port);
|
|
struct ktermios *termios = tty->termios;
|
|
unsigned int cflag = termios->c_cflag;
|
|
__u16 urb_value; /* will hold the new flags */
|
|
char buf[1]; /* Perhaps I should dynamically alloc this? */
|
|
|
|
/* Added for xon/xoff support */
|
|
unsigned int iflag = termios->c_iflag;
|
|
unsigned char vstop;
|
|
unsigned char vstart;
|
|
|
|
dbg("%s", __func__);
|
|
|
|
/* Force baud rate if this device requires it, unless it is set to
|
|
B0. */
|
|
if (priv->force_baud && ((termios->c_cflag & CBAUD) != B0)) {
|
|
dbg("%s: forcing baud rate for this device", __func__);
|
|
tty_encode_baud_rate(tty, priv->force_baud,
|
|
priv->force_baud);
|
|
}
|
|
|
|
/* Force RTS-CTS if this device requires it. */
|
|
if (priv->force_rtscts) {
|
|
dbg("%s: forcing rtscts for this device", __func__);
|
|
termios->c_cflag |= CRTSCTS;
|
|
}
|
|
|
|
cflag = termios->c_cflag;
|
|
|
|
/* FIXME -For this cut I don't care if the line is really changing or
|
|
not - so just do the change regardless - should be able to
|
|
compare old_termios and tty->termios */
|
|
/* NOTE These routines can get interrupted by
|
|
ftdi_sio_read_bulk_callback - need to examine what this means -
|
|
don't see any problems yet */
|
|
|
|
/* Set number of data bits, parity, stop bits */
|
|
|
|
termios->c_cflag &= ~CMSPAR;
|
|
|
|
urb_value = 0;
|
|
urb_value |= (cflag & CSTOPB ? FTDI_SIO_SET_DATA_STOP_BITS_2 :
|
|
FTDI_SIO_SET_DATA_STOP_BITS_1);
|
|
urb_value |= (cflag & PARENB ?
|
|
(cflag & PARODD ? FTDI_SIO_SET_DATA_PARITY_ODD :
|
|
FTDI_SIO_SET_DATA_PARITY_EVEN) :
|
|
FTDI_SIO_SET_DATA_PARITY_NONE);
|
|
if (cflag & CSIZE) {
|
|
switch (cflag & CSIZE) {
|
|
case CS5: urb_value |= 5; dbg("Setting CS5"); break;
|
|
case CS6: urb_value |= 6; dbg("Setting CS6"); break;
|
|
case CS7: urb_value |= 7; dbg("Setting CS7"); break;
|
|
case CS8: urb_value |= 8; dbg("Setting CS8"); break;
|
|
default:
|
|
dev_err(&port->dev, "CSIZE was set but not CS5-CS8\n");
|
|
}
|
|
}
|
|
|
|
/* This is needed by the break command since it uses the same command
|
|
- but is or'ed with this value */
|
|
priv->last_set_data_urb_value = urb_value;
|
|
|
|
if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
|
|
FTDI_SIO_SET_DATA_REQUEST,
|
|
FTDI_SIO_SET_DATA_REQUEST_TYPE,
|
|
urb_value , priv->interface,
|
|
buf, 0, WDR_SHORT_TIMEOUT) < 0) {
|
|
dev_err(&port->dev, "%s FAILED to set "
|
|
"databits/stopbits/parity\n", __func__);
|
|
}
|
|
|
|
/* Now do the baudrate */
|
|
if ((cflag & CBAUD) == B0) {
|
|
/* Disable flow control */
|
|
if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
|
|
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
|
|
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
|
|
0, priv->interface,
|
|
buf, 0, WDR_TIMEOUT) < 0) {
|
|
dev_err(&port->dev,
|
|
"%s error from disable flowcontrol urb\n",
|
|
__func__);
|
|
}
|
|
/* Drop RTS and DTR */
|
|
clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
|
|
} else {
|
|
/* set the baudrate determined before */
|
|
if (change_speed(tty, port))
|
|
dev_err(&port->dev, "%s urb failed to set baudrate\n",
|
|
__func__);
|
|
/* Ensure RTS and DTR are raised when baudrate changed from 0 */
|
|
if (!old_termios || (old_termios->c_cflag & CBAUD) == B0)
|
|
set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
|
|
}
|
|
|
|
/* Set flow control */
|
|
/* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */
|
|
if (cflag & CRTSCTS) {
|
|
dbg("%s Setting to CRTSCTS flow control", __func__);
|
|
if (usb_control_msg(dev,
|
|
usb_sndctrlpipe(dev, 0),
|
|
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
|
|
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
|
|
0 , (FTDI_SIO_RTS_CTS_HS | priv->interface),
|
|
buf, 0, WDR_TIMEOUT) < 0) {
|
|
dev_err(&port->dev,
|
|
"urb failed to set to rts/cts flow control\n");
|
|
}
|
|
|
|
} else {
|
|
/*
|
|
* Xon/Xoff code
|
|
*
|
|
* Check the IXOFF status in the iflag component of the
|
|
* termios structure. If IXOFF is not set, the pre-xon/xoff
|
|
* code is executed.
|
|
*/
|
|
if (iflag & IXOFF) {
|
|
dbg("%s request to enable xonxoff iflag=%04x",
|
|
__func__, iflag);
|
|
/* Try to enable the XON/XOFF on the ftdi_sio
|
|
* Set the vstart and vstop -- could have been done up
|
|
* above where a lot of other dereferencing is done but
|
|
* that would be very inefficient as vstart and vstop
|
|
* are not always needed.
|
|
*/
|
|
vstart = termios->c_cc[VSTART];
|
|
vstop = termios->c_cc[VSTOP];
|
|
urb_value = (vstop << 8) | (vstart);
|
|
|
|
if (usb_control_msg(dev,
|
|
usb_sndctrlpipe(dev, 0),
|
|
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
|
|
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
|
|
urb_value , (FTDI_SIO_XON_XOFF_HS
|
|
| priv->interface),
|
|
buf, 0, WDR_TIMEOUT) < 0) {
|
|
dev_err(&port->dev, "urb failed to set to "
|
|
"xon/xoff flow control\n");
|
|
}
|
|
} else {
|
|
/* else clause to only run if cflag ! CRTSCTS and iflag
|
|
* ! XOFF. CHECKME Assuming XON/XOFF handled by tty
|
|
* stack - not by device */
|
|
dbg("%s Turning off hardware flow control", __func__);
|
|
if (usb_control_msg(dev,
|
|
usb_sndctrlpipe(dev, 0),
|
|
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
|
|
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
|
|
0, priv->interface,
|
|
buf, 0, WDR_TIMEOUT) < 0) {
|
|
dev_err(&port->dev,
|
|
"urb failed to clear flow control\n");
|
|
}
|
|
}
|
|
|
|
}
|
|
return;
|
|
}
|
|
|
|
static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
struct ftdi_private *priv = usb_get_serial_port_data(port);
|
|
unsigned char buf[2];
|
|
int ret;
|
|
|
|
dbg("%s TIOCMGET", __func__);
|
|
switch (priv->chip_type) {
|
|
case SIO:
|
|
/* Request the status from the device */
|
|
ret = usb_control_msg(port->serial->dev,
|
|
usb_rcvctrlpipe(port->serial->dev, 0),
|
|
FTDI_SIO_GET_MODEM_STATUS_REQUEST,
|
|
FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
|
|
0, 0,
|
|
buf, 1, WDR_TIMEOUT);
|
|
if (ret < 0)
|
|
return ret;
|
|
break;
|
|
case FT8U232AM:
|
|
case FT232BM:
|
|
case FT2232C:
|
|
case FT232RL:
|
|
/* the 8U232AM returns a two byte value (the sio is a 1 byte
|
|
value) - in the same format as the data returned from the in
|
|
point */
|
|
ret = usb_control_msg(port->serial->dev,
|
|
usb_rcvctrlpipe(port->serial->dev, 0),
|
|
FTDI_SIO_GET_MODEM_STATUS_REQUEST,
|
|
FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
|
|
0, priv->interface,
|
|
buf, 2, WDR_TIMEOUT);
|
|
if (ret < 0)
|
|
return ret;
|
|
break;
|
|
default:
|
|
return -EFAULT;
|
|
}
|
|
|
|
return (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) |
|
|
(buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) |
|
|
(buf[0] & FTDI_SIO_RI_MASK ? TIOCM_RI : 0) |
|
|
(buf[0] & FTDI_SIO_RLSD_MASK ? TIOCM_CD : 0) |
|
|
priv->last_dtr_rts;
|
|
}
|
|
|
|
static int ftdi_tiocmset(struct tty_struct *tty, struct file *file,
|
|
unsigned int set, unsigned int clear)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
dbg("%s TIOCMSET", __func__);
|
|
return update_mctrl(port, set, clear);
|
|
}
|
|
|
|
|
|
static int ftdi_ioctl(struct tty_struct *tty, struct file *file,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
struct ftdi_private *priv = usb_get_serial_port_data(port);
|
|
|
|
dbg("%s cmd 0x%04x", __func__, cmd);
|
|
|
|
/* Based on code from acm.c and others */
|
|
switch (cmd) {
|
|
|
|
case TIOCGSERIAL: /* gets serial port data */
|
|
return get_serial_info(port,
|
|
(struct serial_struct __user *) arg);
|
|
|
|
case TIOCSSERIAL: /* sets serial port data */
|
|
return set_serial_info(tty, port,
|
|
(struct serial_struct __user *) arg);
|
|
|
|
/*
|
|
* Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
|
|
* - mask passed in arg for lines of interest
|
|
* (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
|
|
* Caller should use TIOCGICOUNT to see which one it was.
|
|
*
|
|
* This code is borrowed from linux/drivers/char/serial.c
|
|
*/
|
|
case TIOCMIWAIT:
|
|
while (priv != NULL) {
|
|
interruptible_sleep_on(&priv->delta_msr_wait);
|
|
/* see if a signal did it */
|
|
if (signal_pending(current))
|
|
return -ERESTARTSYS;
|
|
else {
|
|
char diff = priv->diff_status;
|
|
|
|
if (diff == 0)
|
|
return -EIO; /* no change => error */
|
|
|
|
/* Consume all events */
|
|
priv->diff_status = 0;
|
|
|
|
/* Return 0 if caller wanted to know about
|
|
these bits */
|
|
if (((arg & TIOCM_RNG) && (diff & FTDI_RS0_RI)) ||
|
|
((arg & TIOCM_DSR) && (diff & FTDI_RS0_DSR)) ||
|
|
((arg & TIOCM_CD) && (diff & FTDI_RS0_RLSD)) ||
|
|
((arg & TIOCM_CTS) && (diff & FTDI_RS0_CTS))) {
|
|
return 0;
|
|
}
|
|
/*
|
|
* Otherwise caller can't care less about what
|
|
* happened,and so we continue to wait for more
|
|
* events.
|
|
*/
|
|
}
|
|
}
|
|
return 0;
|
|
default:
|
|
break;
|
|
}
|
|
/* This is not necessarily an error - turns out the higher layers
|
|
* will do some ioctls themselves (see comment above)
|
|
*/
|
|
dbg("%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h", __func__, cmd);
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
|
|
static void ftdi_throttle(struct tty_struct *tty)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
struct ftdi_private *priv = usb_get_serial_port_data(port);
|
|
unsigned long flags;
|
|
|
|
dbg("%s - port %d", __func__, port->number);
|
|
|
|
spin_lock_irqsave(&priv->rx_lock, flags);
|
|
priv->rx_flags |= THROTTLED;
|
|
spin_unlock_irqrestore(&priv->rx_lock, flags);
|
|
}
|
|
|
|
|
|
static void ftdi_unthrottle(struct tty_struct *tty)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
struct ftdi_private *priv = usb_get_serial_port_data(port);
|
|
int actually_throttled;
|
|
unsigned long flags;
|
|
|
|
dbg("%s - port %d", __func__, port->number);
|
|
|
|
spin_lock_irqsave(&priv->rx_lock, flags);
|
|
actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
|
|
priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
|
|
spin_unlock_irqrestore(&priv->rx_lock, flags);
|
|
|
|
if (actually_throttled)
|
|
schedule_delayed_work(&priv->rx_work, 0);
|
|
}
|
|
|
|
static int __init ftdi_init(void)
|
|
{
|
|
int retval;
|
|
|
|
dbg("%s", __func__);
|
|
if (vendor > 0 && product > 0) {
|
|
/* Add user specified VID/PID to reserved element of table. */
|
|
int i;
|
|
for (i = 0; id_table_combined[i].idVendor; i++)
|
|
;
|
|
id_table_combined[i].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
|
|
id_table_combined[i].idVendor = vendor;
|
|
id_table_combined[i].idProduct = product;
|
|
}
|
|
retval = usb_serial_register(&ftdi_sio_device);
|
|
if (retval)
|
|
goto failed_sio_register;
|
|
retval = usb_register(&ftdi_driver);
|
|
if (retval)
|
|
goto failed_usb_register;
|
|
|
|
printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
|
|
DRIVER_DESC "\n");
|
|
return 0;
|
|
failed_usb_register:
|
|
usb_serial_deregister(&ftdi_sio_device);
|
|
failed_sio_register:
|
|
return retval;
|
|
}
|
|
|
|
|
|
static void __exit ftdi_exit(void)
|
|
{
|
|
|
|
dbg("%s", __func__);
|
|
|
|
usb_deregister(&ftdi_driver);
|
|
usb_serial_deregister(&ftdi_sio_device);
|
|
|
|
}
|
|
|
|
|
|
module_init(ftdi_init);
|
|
module_exit(ftdi_exit);
|
|
|
|
MODULE_AUTHOR(DRIVER_AUTHOR);
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_param(debug, bool, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(debug, "Debug enabled or not");
|
|
module_param(vendor, ushort, 0);
|
|
MODULE_PARM_DESC(vendor, "User specified vendor ID (default="
|
|
__MODULE_STRING(FTDI_VID)")");
|
|
module_param(product, ushort, 0);
|
|
MODULE_PARM_DESC(product, "User specified product ID");
|
|
|