351 lines
8.3 KiB
C
351 lines
8.3 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Analog Devices AD7292 SPI ADC driver
|
|
*
|
|
* Copyright 2019 Analog Devices Inc.
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/device.h>
|
|
#include <linux/module.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
|
|
#define ADI_VENDOR_ID 0x0018
|
|
|
|
/* AD7292 registers definition */
|
|
#define AD7292_REG_VENDOR_ID 0x00
|
|
#define AD7292_REG_CONF_BANK 0x05
|
|
#define AD7292_REG_CONV_COMM 0x0E
|
|
#define AD7292_REG_ADC_CH(x) (0x10 + (x))
|
|
|
|
/* AD7292 configuration bank subregisters definition */
|
|
#define AD7292_BANK_REG_VIN_RNG0 0x10
|
|
#define AD7292_BANK_REG_VIN_RNG1 0x11
|
|
#define AD7292_BANK_REG_SAMP_MODE 0x12
|
|
|
|
#define AD7292_RD_FLAG_MSK(x) (BIT(7) | ((x) & 0x3F))
|
|
|
|
/* AD7292_REG_ADC_CONVERSION */
|
|
#define AD7292_ADC_DATA_MASK GENMASK(15, 6)
|
|
#define AD7292_ADC_DATA(x) FIELD_GET(AD7292_ADC_DATA_MASK, x)
|
|
|
|
/* AD7292_CHANNEL_SAMPLING_MODE */
|
|
#define AD7292_CH_SAMP_MODE(reg, ch) (((reg) >> 8) & BIT(ch))
|
|
|
|
/* AD7292_CHANNEL_VIN_RANGE */
|
|
#define AD7292_CH_VIN_RANGE(reg, ch) ((reg) & BIT(ch))
|
|
|
|
#define AD7292_VOLTAGE_CHAN(_chan) \
|
|
{ \
|
|
.type = IIO_VOLTAGE, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
|
|
BIT(IIO_CHAN_INFO_SCALE), \
|
|
.indexed = 1, \
|
|
.channel = _chan, \
|
|
}
|
|
|
|
static const struct iio_chan_spec ad7292_channels[] = {
|
|
AD7292_VOLTAGE_CHAN(0),
|
|
AD7292_VOLTAGE_CHAN(1),
|
|
AD7292_VOLTAGE_CHAN(2),
|
|
AD7292_VOLTAGE_CHAN(3),
|
|
AD7292_VOLTAGE_CHAN(4),
|
|
AD7292_VOLTAGE_CHAN(5),
|
|
AD7292_VOLTAGE_CHAN(6),
|
|
AD7292_VOLTAGE_CHAN(7)
|
|
};
|
|
|
|
static const struct iio_chan_spec ad7292_channels_diff[] = {
|
|
{
|
|
.type = IIO_VOLTAGE,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
|
|
.indexed = 1,
|
|
.differential = 1,
|
|
.channel = 0,
|
|
.channel2 = 1,
|
|
},
|
|
AD7292_VOLTAGE_CHAN(2),
|
|
AD7292_VOLTAGE_CHAN(3),
|
|
AD7292_VOLTAGE_CHAN(4),
|
|
AD7292_VOLTAGE_CHAN(5),
|
|
AD7292_VOLTAGE_CHAN(6),
|
|
AD7292_VOLTAGE_CHAN(7)
|
|
};
|
|
|
|
struct ad7292_state {
|
|
struct spi_device *spi;
|
|
struct regulator *reg;
|
|
unsigned short vref_mv;
|
|
|
|
__be16 d16 ____cacheline_aligned;
|
|
u8 d8[2];
|
|
};
|
|
|
|
static int ad7292_spi_reg_read(struct ad7292_state *st, unsigned int addr)
|
|
{
|
|
int ret;
|
|
|
|
st->d8[0] = AD7292_RD_FLAG_MSK(addr);
|
|
|
|
ret = spi_write_then_read(st->spi, st->d8, 1, &st->d16, 2);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return be16_to_cpu(st->d16);
|
|
}
|
|
|
|
static int ad7292_spi_subreg_read(struct ad7292_state *st, unsigned int addr,
|
|
unsigned int sub_addr, unsigned int len)
|
|
{
|
|
unsigned int shift = 16 - (8 * len);
|
|
int ret;
|
|
|
|
st->d8[0] = AD7292_RD_FLAG_MSK(addr);
|
|
st->d8[1] = sub_addr;
|
|
|
|
ret = spi_write_then_read(st->spi, st->d8, 2, &st->d16, len);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return (be16_to_cpu(st->d16) >> shift);
|
|
}
|
|
|
|
static int ad7292_single_conversion(struct ad7292_state *st,
|
|
unsigned int chan_addr)
|
|
{
|
|
int ret;
|
|
|
|
struct spi_transfer t[] = {
|
|
{
|
|
.tx_buf = &st->d8,
|
|
.len = 4,
|
|
.delay_usecs = 6,
|
|
}, {
|
|
.rx_buf = &st->d16,
|
|
.len = 2,
|
|
},
|
|
};
|
|
|
|
st->d8[0] = chan_addr;
|
|
st->d8[1] = AD7292_RD_FLAG_MSK(AD7292_REG_CONV_COMM);
|
|
|
|
ret = spi_sync_transfer(st->spi, t, ARRAY_SIZE(t));
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return be16_to_cpu(st->d16);
|
|
}
|
|
|
|
static int ad7292_vin_range_multiplier(struct ad7292_state *st, int channel)
|
|
{
|
|
int samp_mode, range0, range1, factor = 1;
|
|
|
|
/*
|
|
* Every AD7292 ADC channel may have its input range adjusted according
|
|
* to the settings at the ADC sampling mode and VIN range subregisters.
|
|
* For a given channel, the minimum input range is equal to Vref, and it
|
|
* may be increased by a multiplier factor of 2 or 4 according to the
|
|
* following rule:
|
|
* If channel is being sampled with respect to AGND:
|
|
* factor = 4 if VIN range0 and VIN range1 equal 0
|
|
* factor = 2 if only one of VIN ranges equal 1
|
|
* factor = 1 if both VIN range0 and VIN range1 equal 1
|
|
* If channel is being sampled with respect to AVDD:
|
|
* factor = 4 if VIN range0 and VIN range1 equal 0
|
|
* Behavior is undefined if any of VIN range doesn't equal 0
|
|
*/
|
|
|
|
samp_mode = ad7292_spi_subreg_read(st, AD7292_REG_CONF_BANK,
|
|
AD7292_BANK_REG_SAMP_MODE, 2);
|
|
|
|
if (samp_mode < 0)
|
|
return samp_mode;
|
|
|
|
range0 = ad7292_spi_subreg_read(st, AD7292_REG_CONF_BANK,
|
|
AD7292_BANK_REG_VIN_RNG0, 2);
|
|
|
|
if (range0 < 0)
|
|
return range0;
|
|
|
|
range1 = ad7292_spi_subreg_read(st, AD7292_REG_CONF_BANK,
|
|
AD7292_BANK_REG_VIN_RNG1, 2);
|
|
|
|
if (range1 < 0)
|
|
return range1;
|
|
|
|
if (AD7292_CH_SAMP_MODE(samp_mode, channel)) {
|
|
/* Sampling with respect to AGND */
|
|
if (!AD7292_CH_VIN_RANGE(range0, channel))
|
|
factor *= 2;
|
|
|
|
if (!AD7292_CH_VIN_RANGE(range1, channel))
|
|
factor *= 2;
|
|
|
|
} else {
|
|
/* Sampling with respect to AVDD */
|
|
if (AD7292_CH_VIN_RANGE(range0, channel) ||
|
|
AD7292_CH_VIN_RANGE(range1, channel))
|
|
return -EPERM;
|
|
|
|
factor = 4;
|
|
}
|
|
|
|
return factor;
|
|
}
|
|
|
|
static int ad7292_read_raw(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
int *val, int *val2, long info)
|
|
{
|
|
struct ad7292_state *st = iio_priv(indio_dev);
|
|
unsigned int ch_addr;
|
|
int ret;
|
|
|
|
switch (info) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
ch_addr = AD7292_REG_ADC_CH(chan->channel);
|
|
ret = ad7292_single_conversion(st, ch_addr);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*val = AD7292_ADC_DATA(ret);
|
|
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
/*
|
|
* To convert a raw value to standard units, the IIO defines
|
|
* this formula: Scaled value = (raw + offset) * scale.
|
|
* For the scale to be a correct multiplier for (raw + offset),
|
|
* it must be calculated as the input range divided by the
|
|
* number of possible distinct input values. Given the ADC data
|
|
* is 10 bit long, it may assume 2^10 distinct values.
|
|
* Hence, scale = range / 2^10. The IIO_VAL_FRACTIONAL_LOG2
|
|
* return type indicates to the IIO API to divide *val by 2 to
|
|
* the power of *val2 when returning from read_raw.
|
|
*/
|
|
|
|
ret = ad7292_vin_range_multiplier(st, chan->channel);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*val = st->vref_mv * ret;
|
|
*val2 = 10;
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
default:
|
|
break;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct iio_info ad7292_info = {
|
|
.read_raw = ad7292_read_raw,
|
|
};
|
|
|
|
static void ad7292_regulator_disable(void *data)
|
|
{
|
|
struct ad7292_state *st = data;
|
|
|
|
regulator_disable(st->reg);
|
|
}
|
|
|
|
static int ad7292_probe(struct spi_device *spi)
|
|
{
|
|
struct ad7292_state *st;
|
|
struct iio_dev *indio_dev;
|
|
struct device_node *child;
|
|
bool diff_channels = 0;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
st = iio_priv(indio_dev);
|
|
st->spi = spi;
|
|
|
|
ret = ad7292_spi_reg_read(st, AD7292_REG_VENDOR_ID);
|
|
if (ret != ADI_VENDOR_ID) {
|
|
dev_err(&spi->dev, "Wrong vendor id 0x%x\n", ret);
|
|
return -EINVAL;
|
|
}
|
|
|
|
spi_set_drvdata(spi, indio_dev);
|
|
|
|
st->reg = devm_regulator_get_optional(&spi->dev, "vref");
|
|
if (!IS_ERR(st->reg)) {
|
|
ret = regulator_enable(st->reg);
|
|
if (ret) {
|
|
dev_err(&spi->dev,
|
|
"Failed to enable external vref supply\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_add_action_or_reset(&spi->dev,
|
|
ad7292_regulator_disable, st);
|
|
if (ret) {
|
|
regulator_disable(st->reg);
|
|
return ret;
|
|
}
|
|
|
|
ret = regulator_get_voltage(st->reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
st->vref_mv = ret / 1000;
|
|
} else {
|
|
/* Use the internal voltage reference. */
|
|
st->vref_mv = 1250;
|
|
}
|
|
|
|
indio_dev->dev.parent = &spi->dev;
|
|
indio_dev->name = spi_get_device_id(spi)->name;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->info = &ad7292_info;
|
|
|
|
for_each_available_child_of_node(spi->dev.of_node, child) {
|
|
diff_channels = of_property_read_bool(child, "diff-channels");
|
|
if (diff_channels)
|
|
break;
|
|
}
|
|
|
|
if (diff_channels) {
|
|
indio_dev->num_channels = ARRAY_SIZE(ad7292_channels_diff);
|
|
indio_dev->channels = ad7292_channels_diff;
|
|
} else {
|
|
indio_dev->num_channels = ARRAY_SIZE(ad7292_channels);
|
|
indio_dev->channels = ad7292_channels;
|
|
}
|
|
|
|
return devm_iio_device_register(&spi->dev, indio_dev);
|
|
}
|
|
|
|
static const struct spi_device_id ad7292_id_table[] = {
|
|
{ "ad7292", 0 },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, ad7292_id_table);
|
|
|
|
static const struct of_device_id ad7292_of_match[] = {
|
|
{ .compatible = "adi,ad7292" },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ad7292_of_match);
|
|
|
|
static struct spi_driver ad7292_driver = {
|
|
.driver = {
|
|
.name = "ad7292",
|
|
.of_match_table = ad7292_of_match,
|
|
},
|
|
.probe = ad7292_probe,
|
|
.id_table = ad7292_id_table,
|
|
};
|
|
module_spi_driver(ad7292_driver);
|
|
|
|
MODULE_AUTHOR("Marcelo Schmitt <marcelo.schmitt1@gmail.com>");
|
|
MODULE_DESCRIPTION("Analog Devices AD7292 ADC driver");
|
|
MODULE_LICENSE("GPL v2");
|