OpenCloudOS-Kernel/arch/arm/mach-omap2
Roger Quadros 0047c909fb ARM: OMAP3: 3430SDP: Adapt to ehci-omap changes
Use usbhs_init_phys() to register the PHY's RESET regulators
and the NOP PHY devices.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-02 09:59:54 -07:00
..
include/mach ARM: OMAP2+: Remove now obsolete uncompress.h and debug-macro.S 2013-01-11 11:24:20 -08:00
Kconfig ARM: OMAP2+: Fix unmet direct dependencies for zoom for 8250 serial 2013-03-04 11:19:22 -08:00
Makefile arm-soc: late OMAP changes 2013-02-28 20:00:40 -08:00
Makefile.boot ARM: dtb: move all dtb targets to common Makefile 2012-09-20 22:58:17 -07:00
am33xx-restart.c ARM: OMAP2+: AM33xx: Add SoC specific restart hook 2013-02-01 14:50:18 -08:00
am33xx.h ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code 2012-11-08 12:33:07 -07:00
am35xx-emac.c ARM: OMAP2+: fix some omap_device_build() calls that aren't compiled by default 2013-02-12 09:00:33 -08:00
am35xx-emac.h
am35xx.h ARM: OMAP2+: Make am35xx.h local 2012-09-20 15:02:23 -07:00
board-2430sdp.c arm-soc: cleanups 2013-02-21 14:58:40 -08:00
board-3430sdp.c ARM: OMAP3: 3430SDP: Adapt to ehci-omap changes 2013-04-02 09:59:54 -07:00
board-3630sdp.c These changes contain the OMAP USB related platform data changes 2013-02-19 20:54:25 +01:00
board-4430sdp.c arm-soc: board specific changes 2013-02-21 15:33:45 -08:00
board-am3517crane.c arm-soc: board specific changes 2013-02-21 15:33:45 -08:00
board-am3517evm.c These changes contain the OMAP USB related platform data changes 2013-02-19 20:54:25 +01:00
board-cm-t35.c arm-soc: board specific changes 2013-02-21 15:33:45 -08:00
board-cm-t3517.c arm-soc: board specific changes 2013-02-21 15:33:45 -08:00
board-devkit8000.c arm-soc: board specific changes 2013-02-21 15:33:45 -08:00
board-flash.c ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
board-flash.h ARM: OMAP2+: gpmc: localize gpmc header 2012-10-15 14:42:15 +05:30
board-generic.c ARM: OMAP3: board-generic: Add missing omap3_init_late 2013-03-04 11:18:49 -08:00
board-h4.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-igep0020.c arm-soc: board specific changes 2013-02-21 15:33:45 -08:00
board-ldp.c arm-soc: cleanups 2013-02-21 14:58:40 -08:00
board-n8x0.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-omap3beagle.c ARM: OMAP3: Beagle: Adapt to ehci-omap changes 2013-04-02 09:59:53 -07:00
board-omap3evm.c arm-soc: board specific changes 2013-02-21 15:33:45 -08:00
board-omap3logic.c arm-soc: cleanups 2013-02-21 14:58:40 -08:00
board-omap3pandora.c arm-soc: soc-specific updates 2013-02-21 15:27:22 -08:00
board-omap3stalker.c arm-soc: soc-specific updates 2013-02-21 15:27:22 -08:00
board-omap3touchbook.c arm-soc: soc-specific updates 2013-02-21 15:27:22 -08:00
board-omap4panda.c ARM: OMAP2+: omap4panda: Adapt to ehci-omap changes 2013-04-02 09:59:52 -07:00
board-overo.c arm-soc: board specific changes 2013-02-21 15:33:45 -08:00
board-rm680.c arm-soc: cleanups 2013-02-21 14:58:40 -08:00
board-rx51-peripherals.c Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds 2013-02-26 09:29:02 -08:00
board-rx51-video.c ARM: OMAP2+: Use omap initcalls 2013-01-11 11:24:18 -08:00
board-rx51.c ARM: OMAP: RX-51: add missing USB phy binding 2013-03-05 08:24:56 -08:00
board-rx51.h ARM: OMAP2+: Make board-rx51.h local 2012-09-20 15:02:27 -07:00
board-ti8168evm.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-zoom-debugboard.c ARM: OMAP2+: Make board-zoom.h local 2012-10-17 11:36:46 -07:00
board-zoom-display.c ARM: OMAP: zoom-display: Remove the use of TWL4030_MODULE_PWM1 2013-02-14 00:22:49 +01:00
board-zoom-peripherals.c arm-soc: board specific changes 2013-02-21 15:33:45 -08:00
board-zoom.c These changes contain the OMAP USB related platform data changes 2013-02-19 20:54:25 +01:00
board-zoom.h ARM: OMAP2+: Make board-zoom.h local 2012-10-17 11:36:46 -07:00
cclock3xxx_data.c ARM: OMAP3: clock: Back-propagate rate change from cam_mclk to dpll4_m5 2013-01-23 00:44:03 +01:00
cclock33xx_data.c ARM: OMAP AM33XX: clock data: SET_RATE_PARENT in lcd path 2013-01-31 10:17:37 -07:00
cclock44xx_data.c omap clock changes via Paul Walmsley <paul@pwsan.com>: 2013-02-12 15:33:15 -08:00
cclock2420_data.c ARM: OMAP2xxx: clock data: clean up unused null clocks 2013-01-26 00:48:55 -07:00
cclock2430_data.c ARM: OMAP2xxx: clock data: clean up unused null clocks 2013-01-26 00:48:55 -07:00
clkt2xxx_apll.c ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clkt2xxx_dpll.c ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clkt2xxx_dpllcore.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
clkt2xxx_osc.c ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clkt2xxx_sys.c ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clkt2xxx_virt_prcm_set.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
clkt34xx_dpll3m2.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
clkt_clksel.c ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clkt_dpll.c ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clkt_iclk.c ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clock.c ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clock.h ARM: OMAP2+: clock data: add DEFINE_STRUCT_CLK_FLAGS helper 2013-01-31 09:27:49 -07:00
clock2xxx.c ARM: OMAP2+: Use omap initcalls 2013-01-11 11:24:18 -08:00
clock2xxx.h ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clock3xxx.c ARM: OMAP2+: Use omap initcalls 2013-01-11 11:24:18 -08:00
clock3xxx.h ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:50 -07:00
clock34xx.c ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:50 -07:00
clock34xx.h
clock36xx.c ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:50 -07:00
clock36xx.h ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:50 -07:00
clock44xx.h
clock2430.c ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clock3517.c ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:50 -07:00
clock3517.h
clock_common_data.c ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clockdomain.c ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints 2013-01-29 14:59:58 -07:00
clockdomain.h ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints 2013-01-29 14:59:58 -07:00
clockdomains2xxx_3xxx_data.c ARM: OMAP2+: hwmod code/clockdomain data: fix 32K sync timer 2012-07-05 17:25:38 -07:00
clockdomains3xxx_data.c ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
clockdomains33xx_data.c ARM: OMAP AM33xx: clockdomains: Add clockdomain data and respective operations 2012-06-18 12:08:06 -06:00
clockdomains44xx_data.c ARM: OMAP2+: clockdomain: Fix OMAP4 ISS clk domain to support only SWSUP 2012-10-29 22:02:13 -06:00
clockdomains2420_data.c ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
clockdomains2430_data.c ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
cm-regbits-24xx.h ARM: OMAP2: clock: Add 24xx data using common struct clk 2012-11-12 19:18:49 -07:00
cm-regbits-33xx.h ARM: AM33XX: cm: Add bit-field width values 2012-09-22 10:53:08 -06:00
cm-regbits-34xx.h ARM: OMAP3: clock: Add 3xxx data using common struct clk 2012-11-12 19:18:49 -07:00
cm-regbits-44xx.h ARM: OMAP4: cm: add bitfield width values 2012-09-22 10:52:59 -06:00
cm.h ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup 2012-11-08 15:09:26 -07:00
cm1_44xx.h
cm2_44xx.h
cm2xxx.c ARM: OMAP2xxx: CM: remove autodep handling 2013-01-29 14:59:57 -07:00
cm2xxx.h ARM: OMAP2+: CM/clock: convert _omap2_module_wait_ready() to use SoC-independent CM functions 2012-11-08 12:33:08 -07:00
cm2xxx_3xxx.h ARM: OMAP3: clock: Add 3xxx data using common struct clk 2012-11-12 19:18:49 -07:00
cm3xxx.c ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints 2013-01-29 14:59:58 -07:00
cm3xxx.h ARM: OMAP2+: CM/clock: convert _omap2_module_wait_ready() to use SoC-independent CM functions 2012-11-08 12:33:08 -07:00
cm33xx.c ARM: OMAP2: am33xx-hwmod: Fix "register offset NULL check" bug 2013-02-08 08:21:13 -07:00
cm33xx.h ARM: OMAP2+: AM33XX: CM/PRM: Use __ASSEMBLER__ macros in header files 2013-02-08 07:24:30 -07:00
cm44xx.c
cm44xx.h
cm_common.c ARM: OMAP2: Fix compillation error in cm_common 2012-11-12 13:42:46 -08:00
cminst44xx.c ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints 2013-01-29 14:59:58 -07:00
cminst44xx.h ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup 2012-11-08 15:09:26 -07:00
common-board-devices.c ARM: arm-soc: Header cleanups 2012-12-12 11:45:16 -08:00
common-board-devices.h ARM: OMAP2+: nand: unify init functions 2012-10-15 12:00:44 +05:30
common.c ARM: OMAP2+: common: remove use of vram 2012-12-16 11:19:48 -08:00
common.h ARM: OMAP2+: Remove duplicate omap4430_init_late() declaration 2013-03-04 11:37:31 -08:00
control.c ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code 2012-11-08 12:33:07 -07:00
control.h OMAP2: Fix a typo - replace regist with register. 2012-12-17 10:50:41 -08:00
cpuidle34xx.c ARM: OMAP3xxx: CPUIdle: optimize __omap3_enter_idle() 2013-01-29 14:59:56 -07:00
cpuidle44xx.c ARM: OMAP3/4: cpuidle: fix sparse and checkpatch warnings 2012-12-15 01:41:24 -07:00
ctrl_module_core_44xx.h ARM: OMAP2+: Make ctrl_module_core_44xx.h local 2012-09-20 15:02:29 -07:00
ctrl_module_pad_core_44xx.h ARM: OMAP2+: Make ctrl_module_pad_core_44xx.h local 2012-09-20 15:02:30 -07:00
ctrl_module_pad_wkup_44xx.h ARM: OMAP2+: Make ctrl_module_pad_wkup_44xx.h local 2012-09-20 15:02:32 -07:00
ctrl_module_wkup_44xx.h ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local 2012-09-20 15:02:33 -07:00
devices.c arm-soc: late OMAP changes 2013-02-28 20:00:40 -08:00
devices.h
display.c ARM: OMAP2+: omap_device: remove obsolete pm_lats and early_device code 2013-01-26 00:48:53 -07:00
display.h
dma.c arm-soc: soc-specific updates 2013-02-21 15:27:22 -08:00
dma.h ARM: OMAP2+: DMA: Moving OMAP2+ DMA channel definitions to mach-omap2 2012-10-15 14:03:51 -07:00
dpll3xxx.c ARM: OMAP2+: dpll: am335x - avoid freqsel 2013-01-31 09:24:52 -07:00
dpll44xx.c ARM: OMAP4: Enhance support for DPLLs with 4X multiplier 2012-12-15 01:35:46 -07:00
drm.c arm-soc: soc-specific updates 2013-02-21 15:27:22 -08:00
dsp.c ARM: OMAP: Make plat/omap-pm.h local to mach-omap2 2012-10-18 16:22:08 -07:00
dss-common.c ARM: OMAP2+: Drop plat/cpu.h for omap2plus 2012-12-17 10:50:41 -08:00
dss-common.h OMAP: omap4sdp: move display init from board file to dss-common.c 2012-11-07 13:26:51 -08:00
emu.c ARM: OMAP2+: Use omap initcalls 2013-01-11 11:24:18 -08:00
fb.c ARM: OMAP2+: Use omap initcalls 2013-01-11 11:24:18 -08:00
gpio.c arm-soc: soc-specific updates 2013-02-21 15:27:22 -08:00
gpmc-nand.c ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs 2013-01-15 14:50:15 -08:00
gpmc-nand.h ARM: OMAP2+: gpmc: localize gpmc header 2012-10-15 14:42:15 +05:30
gpmc-onenand.c ARM: OMAP2+: gpmc-onenand: drop __init annotation 2013-02-01 14:10:11 -08:00
gpmc-onenand.h ARM: OMAP2+: onenand: header cleanup 2012-10-15 14:42:03 +05:30
gpmc-smc91x.c ARM: OMAP2+: smc91x: generic timing calculation 2012-11-09 18:07:22 +05:30
gpmc-smc91x.h ARM: OMAP2+: Make gpmc-smc91x.h local 2012-09-20 15:02:49 -07:00
gpmc-smsc911x.c ARM: OMAP2+: gpmc: localize gpmc header 2012-10-15 14:42:15 +05:30
gpmc-smsc911x.h ARM: OMAP2+: Make gpmc-smsc911x.h local 2012-09-20 15:03:55 -07:00
gpmc.c ARM: OMAP2+: Fix broken gpmc support 2013-03-04 11:12:16 -08:00
gpmc.h ARM: OMAP2+: gpmc: generic timing calculation 2012-11-09 18:07:11 +05:30
hdq1w.c arm-soc: soc-specific updates 2013-02-21 15:27:22 -08:00
hdq1w.h ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2 2012-10-18 16:05:55 -07:00
hsmmc.c ARM: OMAP2+: omap_device: remove obsolete pm_lats and early_device code 2013-01-26 00:48:53 -07:00
hsmmc.h
hwspinlock.c arm-soc: soc-specific updates 2013-02-21 15:27:22 -08:00
i2c.c arm-soc: soc-specific updates 2013-02-21 15:27:22 -08:00
i2c.h ARM: OMAP: Fix relative includes for shared i2c.h file 2012-10-31 15:37:13 -07:00
id.c ARM: OMAP2: AM33XX: id: Add support for AM335x PG2.0 2013-02-01 14:53:39 -08:00
id.h ARM: OMAP2+: Make id.h local 2012-09-20 15:02:22 -07:00
io.c ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h 2012-11-30 08:41:50 -08:00
iomap.h ARM: OMAP5: Add minimal support for OMAP5430 SOC 2012-07-09 19:14:39 +05:30
irq.c These fixes are needed to fix non-omap build breakage for 2012-09-23 17:15:44 -06:00
l3_2xxx.h ARM: OMAP2+: Make l3_2xxx.h local 2012-09-20 15:03:59 -07:00
l3_3xxx.h ARM: OMAP2+: Make l3_3xxx.h local 2012-09-20 15:04:00 -07:00
l4_2xxx.h ARM: OMAP2+: Make l4_2xxx.h local 2012-09-20 15:04:01 -07:00
l4_3xxx.h ARM: OMAP2+: Make l4_3xxx.h local 2012-09-20 15:04:03 -07:00
mailbox.c ARM: drivers: remove __dev* attributes. 2013-01-03 15:57:04 -08:00
mcbsp.c arm-soc: soc-specific updates 2013-02-21 15:27:22 -08:00
mmc.h ARM: OMAP: Split plat/mmc.h into local headers and platform_data 2012-10-15 12:09:43 -07:00
msdi.c ARM: OMAP2+: omap_device: remove obsolete pm_lats and early_device code 2013-01-26 00:48:53 -07:00
mux.c ARM: OMAP2+: mux: correct wrong error messages 2013-03-04 11:37:31 -08:00
mux.h OMAP2+: mux: Fixed gpio mux mode analysis 2012-12-14 11:11:34 -08:00
mux34xx.c OMAP2+: mux: Fixed gpio mux mode analysis 2012-12-14 11:11:34 -08:00
mux34xx.h
mux44xx.c
mux44xx.h
mux2420.c
mux2420.h
mux2430.c
mux2430.h
omap-headsmp.S ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX GIC control register change. 2012-11-05 14:26:43 -08:00
omap-hotplug.c Merge branch 'multiplatform/smp_ops' into next/multiplatform 2012-09-22 00:16:04 -07:00
omap-iommu.c arm-soc: soc-specific updates 2013-02-21 15:27:22 -08:00
omap-mpuss-lowpower.c ARM: OMAP4: MPUSS PM: remove unnecessary shim functions for powerdomain control 2013-01-29 14:59:56 -07:00
omap-pm-noop.c ARM: OMAP: Move omap-pm-noop.c local to mach-omap2 2012-10-31 15:37:13 -07:00
omap-pm.h ARM: OMAP: Make plat/omap-pm.h local to mach-omap2 2012-10-18 16:22:08 -07:00
omap-secure.c ARM: OMAP: Move plat/omap-secure.h locally to mach-omap2 2012-10-18 16:22:24 -07:00
omap-secure.h ARM: OMAP: Move plat/omap-secure.h locally to mach-omap2 2012-10-18 16:22:24 -07:00
omap-smc.S
omap-smp.c ARM: tegra: add Tegra114 SoC support 2013-02-05 13:10:39 -08:00
omap-wakeupgen.c arm-soc: cleanups 2013-02-21 14:58:40 -08:00
omap-wakeupgen.h ARM: OMAP2+: Make omap-wakeupgen.h local 2012-09-20 15:02:37 -07:00
omap2-restart.c ARM: OMAP2+: Use omap initcalls 2013-01-11 11:24:18 -08:00
omap3-restart.c ARM: OMAP2+: PRCM: create SoC-specific chip restart functions 2012-11-08 12:33:08 -07:00
omap4-common.c arm-soc: multiplatform support 2013-02-21 15:20:41 -08:00
omap4-keypad.h ARM: OMAP2+: Make omap4-keypad.h local 2012-09-20 15:04:04 -07:00
omap4-sar-layout.h ARM: OMAP5: Add the WakeupGen IP updates 2012-07-09 19:14:39 +05:30
omap24xx.h ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2 2012-09-12 18:06:31 -07:00
omap34xx.h ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2 2012-09-12 18:06:31 -07:00
omap44xx.h ARM: OMAP: Make use of available scu_a9_get_base() interface 2013-01-28 10:41:39 -07:00
omap54xx.h ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2 2012-09-12 18:06:31 -07:00
omap_device.c arm-soc: soc-specific updates 2013-02-21 15:27:22 -08:00
omap_device.h ARM: OMAP2+: omap_device: remove obsolete pm_lats and early_device code 2013-01-26 00:48:53 -07:00
omap_hwmod.c arm-soc: late OMAP changes 2013-02-28 20:00:40 -08:00
omap_hwmod.h omap4 pm changes via Paul Walmsley <paul@pwsan.com>: 2013-02-12 15:33:39 -08:00
omap_hwmod_2xxx_3xxx_interconnect_data.c ARM: OMAP: Split plat/serial.h for omap1 and omap2+ 2012-10-24 13:34:31 -07:00
omap_hwmod_2xxx_3xxx_ipblock_data.c ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h 2012-11-30 08:41:50 -08:00
omap_hwmod_2xxx_interconnect_data.c ARM: OMAP: Split plat/serial.h for omap1 and omap2+ 2012-10-24 13:34:31 -07:00
omap_hwmod_2xxx_ipblock_data.c Remaining patches to allow omap2+ to build with multiplatform 2012-11-30 21:47:21 -08:00
omap_hwmod_3xxx_data.c ARM: OMAP AM3517/05: hwmod data: block WFI when EMAC active 2013-02-06 13:48:56 -07:00
omap_hwmod_33xx_data.c ARM: OMAP2+: AM33xx: hwmod: add missing HWMOD_NO_IDLEST flags 2013-02-08 08:21:10 -07:00
omap_hwmod_44xx_data.c arm-soc: late OMAP changes 2013-02-28 20:00:40 -08:00
omap_hwmod_2420_data.c ARM: OMAP2420: hwmod data/PM: use hwmod to block WFI when I2C active 2013-02-06 13:48:14 -07:00
omap_hwmod_2430_data.c Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux 2012-12-18 16:51:10 -08:00
omap_hwmod_common_data.c ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2 2012-10-18 16:05:55 -07:00
omap_hwmod_common_data.h ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2 2012-10-18 16:05:55 -07:00
omap_hwmod_reset.c ARM: omap2: include linux/errno.h in hwmod_reset 2013-02-15 13:36:47 +01:00
omap_opp_data.h Merge branch 'omap-for-v3.8/pm' into omap-for-v3.8/clock 2012-11-13 13:25:38 -08:00
omap_phy_internal.c ARM: OMAP2+: Use omap initcalls 2013-01-11 11:24:18 -08:00
omap_twl.c ARM: OMAP2+: omap_twl: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER 2012-12-17 10:50:41 -08:00
opp.c ARM: OMAP: Make omap_device local to mach-omap2 2012-10-17 12:08:40 -07:00
opp2xxx.h
opp3xxx_data.c ARM: OMAP2+: Use omap initcalls 2013-01-11 11:24:18 -08:00
opp4xxx_data.c ARM: OMAP2+: Use omap initcalls 2013-01-11 11:24:18 -08:00
opp2420_data.c ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+ 2012-09-12 18:06:31 -07:00
opp2430_data.c ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+ 2012-09-12 18:06:31 -07:00
pm-debug.c arm-soc: soc-specific updates 2013-02-21 15:27:22 -08:00
pm.c arm-soc: late OMAP changes 2013-02-28 20:00:40 -08:00
pm.h ARM: OMAP2+: PM/powerdomain: move omap_set_pwrdm_state() to powerdomain code 2013-01-29 14:59:57 -07:00
pm24xx.c On OMAP2+ devices, standardize and clean up WFI entry and WFI blocking. 2013-02-11 09:20:50 -08:00
pm34xx.c PM / tracing: remove deprecated power trace API 2013-01-26 00:39:12 +01:00
pm44xx.c ARM: OMAP4: PM: Warn users about usage of older bootloaders 2013-02-06 16:38:32 -07:00
pmu.c arm-soc: soc-specific updates 2013-02-21 15:27:22 -08:00
powerdomain-common.c
powerdomain.c ARM: OMAP2+: powerdomain/clockdomain: add a per-powerdomain spinlock 2013-01-29 14:59:57 -07:00
powerdomain.h ARM: OMAP2+: powerdomain: fix whitespace, improve flag comments 2013-01-29 14:59:58 -07:00
powerdomains2xxx_3xxx_data.c ARM: OMAP2+: powerdomain: fix whitespace, improve flag comments 2013-01-29 14:59:58 -07:00
powerdomains2xxx_3xxx_data.h
powerdomains2xxx_data.c ARM: OMAP2+: powerdomain: fix whitespace, improve flag comments 2013-01-29 14:59:58 -07:00
powerdomains3xxx_data.c ARM: OMAP2+: powerdomain: fix whitespace, improve flag comments 2013-01-29 14:59:58 -07:00
powerdomains33xx_data.c ARM: OMAP AM33xx: powerdomains: add AM335x support 2012-06-18 12:08:06 -06:00
powerdomains44xx_data.c
prcm-common.h ARM: OMAP2+: PRCM: consolidate PRCM-related timeout macros 2012-11-08 15:09:26 -07:00
prcm44xx.h
prcm_mpu44xx.c ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup 2012-11-08 15:09:26 -07:00
prcm_mpu44xx.h ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup 2012-11-08 15:09:26 -07:00
prm-regbits-24xx.h ARM: OMAP2: clock: Add 24xx data using common struct clk 2012-11-12 19:18:49 -07:00
prm-regbits-33xx.h ARM: OMAP AM33xx: PRM: add PRM support 2012-06-18 12:08:06 -06:00
prm-regbits-34xx.h ARM: OMAP3: clock: Add 3xxx data using common struct clk 2012-11-12 19:18:49 -07:00
prm-regbits-44xx.h
prm.h ARM: OMAP2+: hwmod: Add support for per hwmod/module context lost count 2012-11-21 16:15:17 -07:00
prm2xxx.c Some OMAP PRCM and sparse fixes against v3.8-rc1. A basic set of test 2013-01-03 11:04:21 -08:00
prm2xxx.h ARM: OMAP2+: PRM: initialize some PRM functions early 2012-11-21 16:15:16 -07:00
prm2xxx_3xxx.c ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints 2013-01-29 14:59:58 -07:00
prm2xxx_3xxx.h ARM: OMAP3: clock: Add 3xxx data using common struct clk 2012-11-12 19:18:49 -07:00
prm3xxx.c ARM: OMAP2+: Use omap initcalls 2013-01-11 11:24:18 -08:00
prm3xxx.h ARM: OMAP2+: PRM: initialize some PRM functions early 2012-11-21 16:15:16 -07:00
prm33xx.c ARM: OMAP2+: AM33XX: Update the hardreset API 2013-02-08 07:25:28 -07:00
prm33xx.h ARM: OMAP2+: AM33XX: Update the hardreset API 2013-02-08 07:25:28 -07:00
prm44xx.c ARM: OMAP2+: Use omap initcalls 2013-01-11 11:24:18 -08:00
prm44xx.h ARM: OMAP4: PRM: fix RSTTIME and RSTST offsets 2013-01-02 12:07:16 -07:00
prm_common.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
prminst44xx.c ARM: OMAP4+: Add prm and cm base init function. 2012-05-07 23:55:22 -06:00
prminst44xx.h ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup 2012-11-08 15:09:26 -07:00
scrm44xx.h ARM: OMAP4: clock: Add 44xx data using common struct clk 2012-11-12 19:10:20 -07:00
sdram-hynix-h8mbx00u0mer-0em.h ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h 2012-10-17 10:18:37 -07:00
sdram-micron-mt46h32m32lf-6.h ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h 2012-10-17 10:18:37 -07:00
sdram-nokia.c ARM: OMAP: remove plat/clock.h 2012-10-18 16:23:20 -07:00
sdram-nokia.h
sdram-numonyx-m65kxxxxam.h ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h 2012-10-17 10:18:37 -07:00
sdram-qimonda-hyb18m512160af-6.h ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h 2012-10-17 10:18:37 -07:00
sdrc.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
sdrc.h ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code 2012-11-08 12:33:07 -07:00
sdrc2xxx.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
serial.c arm-soc: soc-specific updates 2013-02-21 15:27:22 -08:00
serial.h ARM: OMAP2+: Fix relative includes for serial.h 2012-10-31 15:37:14 -07:00
sleep24xx.S ARM: OMAP2xxx: PM: enter WFI via inline asm if CORE stays active 2013-02-06 13:48:14 -07:00
sleep34xx.S omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
sleep44xx.S ARM: OMAP2+: Make omap-secure.h local 2012-09-20 15:02:35 -07:00
smartreflex-class3.c ARM: OMAP2+: Make sure files with omap initcalls include soc.h 2013-02-09 20:26:31 -08:00
soc.h arm-soc: late OMAP changes 2013-02-28 20:00:40 -08:00
sr_device.c ARM: OMAP2+: fix some omap_device_build() calls that aren't compiled by default 2013-02-12 09:00:33 -08:00
sram.c ARM: OMAP: Move omap2+ specific parts of sram.c to mach-omap2 2012-10-31 10:14:14 -07:00
sram.h ARM: OMAP: Split sram.h to local headers and minimal shared header 2012-10-31 10:14:13 -07:00
sram34xx.S ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files 2012-10-21 01:01:11 -06:00
sram242x.S ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files 2012-10-21 01:01:11 -06:00
sram243x.S ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files 2012-10-21 01:01:11 -06:00
ti81xx.h ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code 2012-11-08 12:33:07 -07:00
timer.c arm-soc: soc-specific updates 2013-02-21 15:27:22 -08:00
twl-common.c arm-soc: board specific changes 2013-02-21 15:33:45 -08:00
twl-common.h ARM: OMAP2+: twl-common: Allow boards to customize the twl4030 audio setup 2013-01-22 10:34:50 +01:00
usb-host.c ARM: OMAP2+: omap-usb-host: Add usbhs_init_phys() 2013-04-02 09:59:52 -07:00
usb-musb.c arm-soc: soc-specific updates 2013-02-21 15:27:22 -08:00
usb-tusb6010.c ARM: OMAP2+: tusb6010: generic timing calculation 2012-11-09 18:07:23 +05:30
usb.h ARM: OMAP2+: omap-usb-host: Add usbhs_init_phys() 2013-04-02 09:59:52 -07:00
vc.c Merge branch 'next/pm-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/pm 2012-11-30 09:12:33 -08:00
vc.h ARM: OMAP3: VC: calculate ramp times 2012-11-05 15:08:23 -08:00
vc3xxx_data.c ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
vc44xx_data.c ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
voltage.c ARM: OMAP: unwrap strings 2012-09-12 02:57:10 -06:00
voltage.h ARM: OMAP4: VC: setup I2C parameters based on board data 2012-11-05 15:31:12 -08:00
voltagedomains2xxx_data.c
voltagedomains3xxx_data.c ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
voltagedomains33xx_data.c ARM: OMAP AM33xx: voltagedomain: Add voltage domain data 2012-06-18 00:47:26 -06:00
voltagedomains44xx_data.c Merge branch 'omap-for-v3.8/pm' into omap-for-v3.8/clock 2012-11-13 13:25:38 -08:00
vp.c OMAP voltage layer updates towards supporting auto-retention/auto-off 2012-11-06 17:06:37 -08:00
vp.h ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
vp3xxx_data.c ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
vp44xx_data.c ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
wd_timer.c arm-soc: soc-specific updates 2013-02-21 15:27:22 -08:00
wd_timer.h ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2 2012-10-18 16:05:55 -07:00