2518 lines
72 KiB
C
2518 lines
72 KiB
C
// SPDX-License-Identifier: GPL-2.0-only OR MIT
|
|
/*
|
|
* Bluetooth HCI driver for Broadcom 4377/4378/4387 devices attached via PCIe
|
|
*
|
|
* Copyright (C) The Asahi Linux Contributors
|
|
*/
|
|
|
|
#include <linux/async.h>
|
|
#include <linux/bitfield.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/dmi.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/module.h>
|
|
#include <linux/msi.h>
|
|
#include <linux/of.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/printk.h>
|
|
|
|
#include <asm/unaligned.h>
|
|
|
|
#include <net/bluetooth/bluetooth.h>
|
|
#include <net/bluetooth/hci_core.h>
|
|
|
|
enum bcm4377_chip {
|
|
BCM4377 = 0,
|
|
BCM4378,
|
|
BCM4387,
|
|
};
|
|
|
|
#define BCM4377_DEVICE_ID 0x5fa0
|
|
#define BCM4378_DEVICE_ID 0x5f69
|
|
#define BCM4387_DEVICE_ID 0x5f71
|
|
|
|
#define BCM4377_TIMEOUT msecs_to_jiffies(1000)
|
|
|
|
/*
|
|
* These devices only support DMA transactions inside a 32bit window
|
|
* (possibly to avoid 64 bit arithmetic). The window size cannot exceed
|
|
* 0xffffffff but is always aligned down to the previous 0x200 byte boundary
|
|
* which effectively limits the window to [start, start+0xfffffe00].
|
|
* We just limit the DMA window to [0, 0xfffffe00] to make sure we don't
|
|
* run into this limitation.
|
|
*/
|
|
#define BCM4377_DMA_MASK 0xfffffe00
|
|
|
|
#define BCM4377_PCIECFG_BAR0_WINDOW1 0x80
|
|
#define BCM4377_PCIECFG_BAR0_WINDOW2 0x70
|
|
#define BCM4377_PCIECFG_BAR0_CORE2_WINDOW1 0x74
|
|
#define BCM4377_PCIECFG_BAR0_CORE2_WINDOW2 0x78
|
|
#define BCM4377_PCIECFG_BAR2_WINDOW 0x84
|
|
|
|
#define BCM4377_PCIECFG_BAR0_CORE2_WINDOW1_DEFAULT 0x18011000
|
|
#define BCM4377_PCIECFG_BAR2_WINDOW_DEFAULT 0x19000000
|
|
|
|
#define BCM4377_PCIECFG_SUBSYSTEM_CTRL 0x88
|
|
|
|
#define BCM4377_BAR0_FW_DOORBELL 0x140
|
|
#define BCM4377_BAR0_RTI_CONTROL 0x144
|
|
|
|
#define BCM4377_BAR0_SLEEP_CONTROL 0x150
|
|
#define BCM4377_BAR0_SLEEP_CONTROL_UNQUIESCE 0
|
|
#define BCM4377_BAR0_SLEEP_CONTROL_AWAKE 2
|
|
#define BCM4377_BAR0_SLEEP_CONTROL_QUIESCE 3
|
|
|
|
#define BCM4377_BAR0_DOORBELL 0x174
|
|
#define BCM4377_BAR0_DOORBELL_VALUE GENMASK(31, 16)
|
|
#define BCM4377_BAR0_DOORBELL_IDX GENMASK(15, 8)
|
|
#define BCM4377_BAR0_DOORBELL_RING BIT(5)
|
|
|
|
#define BCM4377_BAR0_HOST_WINDOW_LO 0x590
|
|
#define BCM4377_BAR0_HOST_WINDOW_HI 0x594
|
|
#define BCM4377_BAR0_HOST_WINDOW_SIZE 0x598
|
|
|
|
#define BCM4377_BAR2_BOOTSTAGE 0x200454
|
|
|
|
#define BCM4377_BAR2_FW_LO 0x200478
|
|
#define BCM4377_BAR2_FW_HI 0x20047c
|
|
#define BCM4377_BAR2_FW_SIZE 0x200480
|
|
|
|
#define BCM4377_BAR2_CONTEXT_ADDR_LO 0x20048c
|
|
#define BCM4377_BAR2_CONTEXT_ADDR_HI 0x200450
|
|
|
|
#define BCM4377_BAR2_RTI_STATUS 0x20045c
|
|
#define BCM4377_BAR2_RTI_WINDOW_LO 0x200494
|
|
#define BCM4377_BAR2_RTI_WINDOW_HI 0x200498
|
|
#define BCM4377_BAR2_RTI_WINDOW_SIZE 0x20049c
|
|
|
|
#define BCM4377_OTP_SIZE 0xe0
|
|
#define BCM4377_OTP_SYS_VENDOR 0x15
|
|
#define BCM4377_OTP_CIS 0x80
|
|
#define BCM4377_OTP_VENDOR_HDR 0x00000008
|
|
#define BCM4377_OTP_MAX_PARAM_LEN 16
|
|
|
|
#define BCM4377_N_TRANSFER_RINGS 9
|
|
#define BCM4377_N_COMPLETION_RINGS 6
|
|
|
|
#define BCM4377_MAX_RING_SIZE 256
|
|
|
|
#define BCM4377_MSGID_GENERATION GENMASK(15, 8)
|
|
#define BCM4377_MSGID_ID GENMASK(7, 0)
|
|
|
|
#define BCM4377_RING_N_ENTRIES 128
|
|
|
|
#define BCM4377_CONTROL_MSG_SIZE 0x34
|
|
#define BCM4377_XFER_RING_MAX_INPLACE_PAYLOAD_SIZE (4 * 0xff)
|
|
|
|
#define MAX_ACL_PAYLOAD_SIZE (HCI_MAX_FRAME_SIZE + HCI_ACL_HDR_SIZE)
|
|
#define MAX_SCO_PAYLOAD_SIZE (HCI_MAX_SCO_SIZE + HCI_SCO_HDR_SIZE)
|
|
#define MAX_EVENT_PAYLOAD_SIZE (HCI_MAX_EVENT_SIZE + HCI_EVENT_HDR_SIZE)
|
|
|
|
enum bcm4377_otp_params_type {
|
|
BCM4377_OTP_BOARD_PARAMS,
|
|
BCM4377_OTP_CHIP_PARAMS
|
|
};
|
|
|
|
enum bcm4377_transfer_ring_id {
|
|
BCM4377_XFER_RING_CONTROL = 0,
|
|
BCM4377_XFER_RING_HCI_H2D = 1,
|
|
BCM4377_XFER_RING_HCI_D2H = 2,
|
|
BCM4377_XFER_RING_SCO_H2D = 3,
|
|
BCM4377_XFER_RING_SCO_D2H = 4,
|
|
BCM4377_XFER_RING_ACL_H2D = 5,
|
|
BCM4377_XFER_RING_ACL_D2H = 6,
|
|
};
|
|
|
|
enum bcm4377_completion_ring_id {
|
|
BCM4377_ACK_RING_CONTROL = 0,
|
|
BCM4377_ACK_RING_HCI_ACL = 1,
|
|
BCM4377_EVENT_RING_HCI_ACL = 2,
|
|
BCM4377_ACK_RING_SCO = 3,
|
|
BCM4377_EVENT_RING_SCO = 4,
|
|
};
|
|
|
|
enum bcm4377_doorbell {
|
|
BCM4377_DOORBELL_CONTROL = 0,
|
|
BCM4377_DOORBELL_HCI_H2D = 1,
|
|
BCM4377_DOORBELL_HCI_D2H = 2,
|
|
BCM4377_DOORBELL_ACL_H2D = 3,
|
|
BCM4377_DOORBELL_ACL_D2H = 4,
|
|
BCM4377_DOORBELL_SCO = 6,
|
|
};
|
|
|
|
/*
|
|
* Transfer ring entry
|
|
*
|
|
* flags: Flags to indicate if the payload is appended or mapped
|
|
* len: Payload length
|
|
* payload: Optional payload DMA address
|
|
* id: Message id to recognize the answer in the completion ring entry
|
|
*/
|
|
struct bcm4377_xfer_ring_entry {
|
|
#define BCM4377_XFER_RING_FLAG_PAYLOAD_MAPPED BIT(0)
|
|
#define BCM4377_XFER_RING_FLAG_PAYLOAD_IN_FOOTER BIT(1)
|
|
u8 flags;
|
|
__le16 len;
|
|
u8 _unk0;
|
|
__le64 payload;
|
|
__le16 id;
|
|
u8 _unk1[2];
|
|
} __packed;
|
|
static_assert(sizeof(struct bcm4377_xfer_ring_entry) == 0x10);
|
|
|
|
/*
|
|
* Completion ring entry
|
|
*
|
|
* flags: Flags to indicate if the payload is appended or mapped. If the payload
|
|
* is mapped it can be found in the buffer of the corresponding transfer
|
|
* ring message.
|
|
* ring_id: Transfer ring ID which required this message
|
|
* msg_id: Message ID specified in transfer ring entry
|
|
* len: Payload length
|
|
*/
|
|
struct bcm4377_completion_ring_entry {
|
|
u8 flags;
|
|
u8 _unk0;
|
|
__le16 ring_id;
|
|
__le16 msg_id;
|
|
__le32 len;
|
|
u8 _unk1[6];
|
|
} __packed;
|
|
static_assert(sizeof(struct bcm4377_completion_ring_entry) == 0x10);
|
|
|
|
enum bcm4377_control_message_type {
|
|
BCM4377_CONTROL_MSG_CREATE_XFER_RING = 1,
|
|
BCM4377_CONTROL_MSG_CREATE_COMPLETION_RING = 2,
|
|
BCM4377_CONTROL_MSG_DESTROY_XFER_RING = 3,
|
|
BCM4377_CONTROL_MSG_DESTROY_COMPLETION_RING = 4,
|
|
};
|
|
|
|
/*
|
|
* Control message used to create a completion ring
|
|
*
|
|
* msg_type: Must be BCM4377_CONTROL_MSG_CREATE_COMPLETION_RING
|
|
* header_size: Unknown, but probably reserved space in front of the entry
|
|
* footer_size: Number of 32 bit words reserved for payloads after the entry
|
|
* id/id_again: Completion ring index
|
|
* ring_iova: DMA address of the ring buffer
|
|
* n_elements: Number of elements inside the ring buffer
|
|
* msi: MSI index, doesn't work for all rings though and should be zero
|
|
* intmod_delay: Unknown delay
|
|
* intmod_bytes: Unknown
|
|
*/
|
|
struct bcm4377_create_completion_ring_msg {
|
|
u8 msg_type;
|
|
u8 header_size;
|
|
u8 footer_size;
|
|
u8 _unk0;
|
|
__le16 id;
|
|
__le16 id_again;
|
|
__le64 ring_iova;
|
|
__le16 n_elements;
|
|
__le32 unk;
|
|
u8 _unk1[6];
|
|
__le16 msi;
|
|
__le16 intmod_delay;
|
|
__le32 intmod_bytes;
|
|
__le16 _unk2;
|
|
__le32 _unk3;
|
|
u8 _unk4[10];
|
|
} __packed;
|
|
static_assert(sizeof(struct bcm4377_create_completion_ring_msg) ==
|
|
BCM4377_CONTROL_MSG_SIZE);
|
|
|
|
/*
|
|
* Control ring message used to destroy a completion ring
|
|
*
|
|
* msg_type: Must be BCM4377_CONTROL_MSG_DESTROY_COMPLETION_RING
|
|
* ring_id: Completion ring to be destroyed
|
|
*/
|
|
struct bcm4377_destroy_completion_ring_msg {
|
|
u8 msg_type;
|
|
u8 _pad0;
|
|
__le16 ring_id;
|
|
u8 _pad1[48];
|
|
} __packed;
|
|
static_assert(sizeof(struct bcm4377_destroy_completion_ring_msg) ==
|
|
BCM4377_CONTROL_MSG_SIZE);
|
|
|
|
/*
|
|
* Control message used to create a transfer ring
|
|
*
|
|
* msg_type: Must be BCM4377_CONTROL_MSG_CREATE_XFER_RING
|
|
* header_size: Number of 32 bit words reserved for unknown content before the
|
|
* entry
|
|
* footer_size: Number of 32 bit words reserved for payloads after the entry
|
|
* ring_id/ring_id_again: Transfer ring index
|
|
* ring_iova: DMA address of the ring buffer
|
|
* n_elements: Number of elements inside the ring buffer
|
|
* completion_ring_id: Completion ring index for acknowledgements and events
|
|
* doorbell: Doorbell index used to notify device of new entries
|
|
* flags: Transfer ring flags
|
|
* - virtual: set if there is no associated shared memory and only the
|
|
* corresponding completion ring is used
|
|
* - sync: only set for the SCO rings
|
|
*/
|
|
struct bcm4377_create_transfer_ring_msg {
|
|
u8 msg_type;
|
|
u8 header_size;
|
|
u8 footer_size;
|
|
u8 _unk0;
|
|
__le16 ring_id;
|
|
__le16 ring_id_again;
|
|
__le64 ring_iova;
|
|
u8 _unk1[8];
|
|
__le16 n_elements;
|
|
__le16 completion_ring_id;
|
|
__le16 doorbell;
|
|
#define BCM4377_XFER_RING_FLAG_VIRTUAL BIT(7)
|
|
#define BCM4377_XFER_RING_FLAG_SYNC BIT(8)
|
|
__le16 flags;
|
|
u8 _unk2[20];
|
|
} __packed;
|
|
static_assert(sizeof(struct bcm4377_create_transfer_ring_msg) ==
|
|
BCM4377_CONTROL_MSG_SIZE);
|
|
|
|
/*
|
|
* Control ring message used to destroy a transfer ring
|
|
*
|
|
* msg_type: Must be BCM4377_CONTROL_MSG_DESTROY_XFER_RING
|
|
* ring_id: Transfer ring to be destroyed
|
|
*/
|
|
struct bcm4377_destroy_transfer_ring_msg {
|
|
u8 msg_type;
|
|
u8 _pad0;
|
|
__le16 ring_id;
|
|
u8 _pad1[48];
|
|
} __packed;
|
|
static_assert(sizeof(struct bcm4377_destroy_transfer_ring_msg) ==
|
|
BCM4377_CONTROL_MSG_SIZE);
|
|
|
|
/*
|
|
* "Converged IPC" context struct used to make the device aware of all other
|
|
* shared memory structures. A pointer to this structure is configured inside a
|
|
* MMIO register.
|
|
*
|
|
* version: Protocol version, must be 2.
|
|
* size: Size of this structure, must be 0x68.
|
|
* enabled_caps: Enabled capabilities. Unknown bitfield but should be 2.
|
|
* peripheral_info_addr: DMA address for a 0x20 buffer to which the device will
|
|
* write unknown contents
|
|
* {completion,xfer}_ring_{tails,heads}_addr: DMA pointers to ring heads/tails
|
|
* n_completion_rings: Number of completion rings, the firmware only works if
|
|
* this is set to BCM4377_N_COMPLETION_RINGS.
|
|
* n_xfer_rings: Number of transfer rings, the firmware only works if
|
|
* this is set to BCM4377_N_TRANSFER_RINGS.
|
|
* control_completion_ring_addr: Control completion ring buffer DMA address
|
|
* control_xfer_ring_addr: Control transfer ring buffer DMA address
|
|
* control_xfer_ring_n_entries: Number of control transfer ring entries
|
|
* control_completion_ring_n_entries: Number of control completion ring entries
|
|
* control_xfer_ring_doorbell: Control transfer ring doorbell
|
|
* control_completion_ring_doorbell: Control completion ring doorbell,
|
|
* must be set to 0xffff
|
|
* control_xfer_ring_msi: Control completion ring MSI index, must be 0
|
|
* control_completion_ring_msi: Control completion ring MSI index, must be 0.
|
|
* control_xfer_ring_header_size: Number of 32 bit words reserved in front of
|
|
* every control transfer ring entry
|
|
* control_xfer_ring_footer_size: Number of 32 bit words reserved after every
|
|
* control transfer ring entry
|
|
* control_completion_ring_header_size: Number of 32 bit words reserved in front
|
|
* of every control completion ring entry
|
|
* control_completion_ring_footer_size: Number of 32 bit words reserved after
|
|
* every control completion ring entry
|
|
* scratch_pad: Optional scratch pad DMA address
|
|
* scratch_pad_size: Scratch pad size
|
|
*/
|
|
struct bcm4377_context {
|
|
__le16 version;
|
|
__le16 size;
|
|
__le32 enabled_caps;
|
|
|
|
__le64 peripheral_info_addr;
|
|
|
|
/* ring heads and tails */
|
|
__le64 completion_ring_heads_addr;
|
|
__le64 xfer_ring_tails_addr;
|
|
__le64 completion_ring_tails_addr;
|
|
__le64 xfer_ring_heads_addr;
|
|
__le16 n_completion_rings;
|
|
__le16 n_xfer_rings;
|
|
|
|
/* control ring configuration */
|
|
__le64 control_completion_ring_addr;
|
|
__le64 control_xfer_ring_addr;
|
|
__le16 control_xfer_ring_n_entries;
|
|
__le16 control_completion_ring_n_entries;
|
|
__le16 control_xfer_ring_doorbell;
|
|
__le16 control_completion_ring_doorbell;
|
|
__le16 control_xfer_ring_msi;
|
|
__le16 control_completion_ring_msi;
|
|
u8 control_xfer_ring_header_size;
|
|
u8 control_xfer_ring_footer_size;
|
|
u8 control_completion_ring_header_size;
|
|
u8 control_completion_ring_footer_size;
|
|
|
|
__le16 _unk0;
|
|
__le16 _unk1;
|
|
|
|
__le64 scratch_pad;
|
|
__le32 scratch_pad_size;
|
|
|
|
__le32 _unk3;
|
|
} __packed;
|
|
static_assert(sizeof(struct bcm4377_context) == 0x68);
|
|
|
|
#define BCM4378_CALIBRATION_CHUNK_SIZE 0xe6
|
|
struct bcm4378_hci_send_calibration_cmd {
|
|
u8 unk;
|
|
__le16 blocks_left;
|
|
u8 data[BCM4378_CALIBRATION_CHUNK_SIZE];
|
|
} __packed;
|
|
|
|
#define BCM4378_PTB_CHUNK_SIZE 0xcf
|
|
struct bcm4378_hci_send_ptb_cmd {
|
|
__le16 blocks_left;
|
|
u8 data[BCM4378_PTB_CHUNK_SIZE];
|
|
} __packed;
|
|
|
|
/*
|
|
* Shared memory structure used to store the ring head and tail pointers.
|
|
*/
|
|
struct bcm4377_ring_state {
|
|
__le16 completion_ring_head[BCM4377_N_COMPLETION_RINGS];
|
|
__le16 completion_ring_tail[BCM4377_N_COMPLETION_RINGS];
|
|
__le16 xfer_ring_head[BCM4377_N_TRANSFER_RINGS];
|
|
__le16 xfer_ring_tail[BCM4377_N_TRANSFER_RINGS];
|
|
};
|
|
|
|
/*
|
|
* A transfer ring can be used in two configurations:
|
|
* 1) Send control or HCI messages to the device which are then acknowledged
|
|
* in the corresponding completion ring
|
|
* 2) Receiving HCI frames from the devices. In this case the transfer ring
|
|
* itself contains empty messages that are acknowledged once data is
|
|
* available from the device. If the payloads fit inside the footers
|
|
* of the completion ring the transfer ring can be configured to be
|
|
* virtual such that it has no ring buffer.
|
|
*
|
|
* ring_id: ring index hardcoded in the firmware
|
|
* doorbell: doorbell index to notify device of new entries
|
|
* payload_size: optional in-place payload size
|
|
* mapped_payload_size: optional out-of-place payload size
|
|
* completion_ring: index of corresponding completion ring
|
|
* n_entries: number of entries inside this ring
|
|
* generation: ring generation; incremented on hci_open to detect stale messages
|
|
* sync: set to true for SCO rings
|
|
* virtual: set to true if this ring has no entries and is just required to
|
|
* setup a corresponding completion ring for device->host messages
|
|
* d2h_buffers_only: set to true if this ring is only used to provide large
|
|
* buffers used by device->host messages in the completion
|
|
* ring
|
|
* allow_wait: allow to wait for messages to be acknowledged
|
|
* enabled: true once the ring has been created and can be used
|
|
* ring: ring buffer for entries (struct bcm4377_xfer_ring_entry)
|
|
* ring_dma: DMA address for ring entry buffer
|
|
* payloads: payload buffer for mapped_payload_size payloads
|
|
* payloads_dma:DMA address for payload buffer
|
|
* events: pointer to array of completions if waiting is allowed
|
|
* msgids: bitmap to keep track of used message ids
|
|
* lock: Spinlock to protect access to ring structurs used in the irq handler
|
|
*/
|
|
struct bcm4377_transfer_ring {
|
|
enum bcm4377_transfer_ring_id ring_id;
|
|
enum bcm4377_doorbell doorbell;
|
|
size_t payload_size;
|
|
size_t mapped_payload_size;
|
|
u8 completion_ring;
|
|
u16 n_entries;
|
|
u8 generation;
|
|
|
|
bool sync;
|
|
bool virtual;
|
|
bool d2h_buffers_only;
|
|
bool allow_wait;
|
|
bool enabled;
|
|
|
|
void *ring;
|
|
dma_addr_t ring_dma;
|
|
|
|
void *payloads;
|
|
dma_addr_t payloads_dma;
|
|
|
|
struct completion **events;
|
|
DECLARE_BITMAP(msgids, BCM4377_MAX_RING_SIZE);
|
|
spinlock_t lock;
|
|
};
|
|
|
|
/*
|
|
* A completion ring can be either used to either acknowledge messages sent in
|
|
* the corresponding transfer ring or to receive messages associated with the
|
|
* transfer ring. When used to receive messages the transfer ring either
|
|
* has no ring buffer and is only advanced ("virtual transfer ring") or it
|
|
* only contains empty DMA buffers to be used for the payloads.
|
|
*
|
|
* ring_id: completion ring id, hardcoded in firmware
|
|
* payload_size: optional payload size after each entry
|
|
* delay: unknown delay
|
|
* n_entries: number of entries in this ring
|
|
* enabled: true once the ring has been created and can be used
|
|
* ring: ring buffer for entries (struct bcm4377_completion_ring_entry)
|
|
* ring_dma: DMA address of ring buffer
|
|
* transfer_rings: bitmap of corresponding transfer ring ids
|
|
*/
|
|
struct bcm4377_completion_ring {
|
|
enum bcm4377_completion_ring_id ring_id;
|
|
u16 payload_size;
|
|
u16 delay;
|
|
u16 n_entries;
|
|
bool enabled;
|
|
|
|
void *ring;
|
|
dma_addr_t ring_dma;
|
|
|
|
unsigned long transfer_rings;
|
|
};
|
|
|
|
struct bcm4377_data;
|
|
|
|
/*
|
|
* Chip-specific configuration struct
|
|
*
|
|
* id: Chip id (e.g. 0x4377 for BCM4377)
|
|
* otp_offset: Offset to the start of the OTP inside BAR0
|
|
* bar0_window1: Backplane address mapped to the first window in BAR0
|
|
* bar0_window2: Backplane address mapped to the second window in BAR0
|
|
* bar0_core2_window2: Optional backplane address mapped to the second core's
|
|
* second window in BAR0
|
|
* has_bar0_core2_window2: Set to true if this chip requires the second core's
|
|
* second window to be configured
|
|
* clear_pciecfg_subsystem_ctrl_bit19: Set to true if bit 19 in the
|
|
* vendor-specific subsystem control
|
|
* register has to be cleared
|
|
* disable_aspm: Set to true if ASPM must be disabled due to hardware errata
|
|
* broken_ext_scan: Set to true if the chip erroneously claims to support
|
|
* extended scanning
|
|
* broken_mws_transport_config: Set to true if the chip erroneously claims to
|
|
* support MWS Transport Configuration
|
|
* send_calibration: Optional callback to send calibration data
|
|
* send_ptb: Callback to send "PTB" regulatory/calibration data
|
|
*/
|
|
struct bcm4377_hw {
|
|
unsigned int id;
|
|
|
|
u32 otp_offset;
|
|
|
|
u32 bar0_window1;
|
|
u32 bar0_window2;
|
|
u32 bar0_core2_window2;
|
|
|
|
unsigned long has_bar0_core2_window2 : 1;
|
|
unsigned long clear_pciecfg_subsystem_ctrl_bit19 : 1;
|
|
unsigned long disable_aspm : 1;
|
|
unsigned long broken_ext_scan : 1;
|
|
unsigned long broken_mws_transport_config : 1;
|
|
unsigned long broken_le_coded : 1;
|
|
|
|
int (*send_calibration)(struct bcm4377_data *bcm4377);
|
|
int (*send_ptb)(struct bcm4377_data *bcm4377,
|
|
const struct firmware *fw);
|
|
};
|
|
|
|
static const struct bcm4377_hw bcm4377_hw_variants[];
|
|
static const struct dmi_system_id bcm4377_dmi_board_table[];
|
|
|
|
/*
|
|
* Private struct associated with each device containing global state
|
|
*
|
|
* pdev: Pointer to associated struct pci_dev
|
|
* hdev: Pointer to associated strucy hci_dev
|
|
* bar0: iomem pointing to BAR0
|
|
* bar1: iomem pointing to BAR2
|
|
* bootstage: Current value of the bootstage
|
|
* rti_status: Current "RTI" status value
|
|
* hw: Pointer to chip-specific struct bcm4377_hw
|
|
* taurus_cal_blob: "Taurus" calibration blob used for some chips
|
|
* taurus_cal_size: "Taurus" calibration blob size
|
|
* taurus_beamforming_cal_blob: "Taurus" beamforming calibration blob used for
|
|
* some chips
|
|
* taurus_beamforming_cal_size: "Taurus" beamforming calibration blob size
|
|
* stepping: Chip stepping read from OTP; used for firmware selection
|
|
* vendor: Antenna vendor read from OTP; used for firmware selection
|
|
* board_type: Board type from FDT or DMI match; used for firmware selection
|
|
* event: Event for changed bootstage or rti_status; used for booting firmware
|
|
* ctx: "Converged IPC" context
|
|
* ctx_dma: "Converged IPC" context DMA address
|
|
* ring_state: Shared memory buffer containing ring head and tail indexes
|
|
* ring_state_dma: DMA address for ring_state
|
|
* {control,hci_acl,sco}_ack_ring: Completion rings used to acknowledge messages
|
|
* {hci_acl,sco}_event_ring: Completion rings used for device->host messages
|
|
* control_h2d_ring: Transfer ring used for control messages
|
|
* {hci,sco,acl}_h2d_ring: Transfer ring used to transfer HCI frames
|
|
* {hci,sco,acl}_d2h_ring: Transfer ring used to receive HCI frames in the
|
|
* corresponding completion ring
|
|
*/
|
|
struct bcm4377_data {
|
|
struct pci_dev *pdev;
|
|
struct hci_dev *hdev;
|
|
|
|
void __iomem *bar0;
|
|
void __iomem *bar2;
|
|
|
|
u32 bootstage;
|
|
u32 rti_status;
|
|
|
|
const struct bcm4377_hw *hw;
|
|
|
|
const void *taurus_cal_blob;
|
|
int taurus_cal_size;
|
|
const void *taurus_beamforming_cal_blob;
|
|
int taurus_beamforming_cal_size;
|
|
|
|
char stepping[BCM4377_OTP_MAX_PARAM_LEN];
|
|
char vendor[BCM4377_OTP_MAX_PARAM_LEN];
|
|
const char *board_type;
|
|
|
|
struct completion event;
|
|
|
|
struct bcm4377_context *ctx;
|
|
dma_addr_t ctx_dma;
|
|
|
|
struct bcm4377_ring_state *ring_state;
|
|
dma_addr_t ring_state_dma;
|
|
|
|
/*
|
|
* The HCI and ACL rings have to be merged because this structure is
|
|
* hardcoded in the firmware.
|
|
*/
|
|
struct bcm4377_completion_ring control_ack_ring;
|
|
struct bcm4377_completion_ring hci_acl_ack_ring;
|
|
struct bcm4377_completion_ring hci_acl_event_ring;
|
|
struct bcm4377_completion_ring sco_ack_ring;
|
|
struct bcm4377_completion_ring sco_event_ring;
|
|
|
|
struct bcm4377_transfer_ring control_h2d_ring;
|
|
struct bcm4377_transfer_ring hci_h2d_ring;
|
|
struct bcm4377_transfer_ring hci_d2h_ring;
|
|
struct bcm4377_transfer_ring sco_h2d_ring;
|
|
struct bcm4377_transfer_ring sco_d2h_ring;
|
|
struct bcm4377_transfer_ring acl_h2d_ring;
|
|
struct bcm4377_transfer_ring acl_d2h_ring;
|
|
};
|
|
|
|
static void bcm4377_ring_doorbell(struct bcm4377_data *bcm4377, u8 doorbell,
|
|
u16 val)
|
|
{
|
|
u32 db = 0;
|
|
|
|
db |= FIELD_PREP(BCM4377_BAR0_DOORBELL_VALUE, val);
|
|
db |= FIELD_PREP(BCM4377_BAR0_DOORBELL_IDX, doorbell);
|
|
db |= BCM4377_BAR0_DOORBELL_RING;
|
|
|
|
dev_dbg(&bcm4377->pdev->dev, "write %d to doorbell #%d (0x%x)\n", val,
|
|
doorbell, db);
|
|
iowrite32(db, bcm4377->bar0 + BCM4377_BAR0_DOORBELL);
|
|
}
|
|
|
|
static int bcm4377_extract_msgid(struct bcm4377_data *bcm4377,
|
|
struct bcm4377_transfer_ring *ring,
|
|
u16 raw_msgid, u8 *msgid)
|
|
{
|
|
u8 generation = FIELD_GET(BCM4377_MSGID_GENERATION, raw_msgid);
|
|
*msgid = FIELD_GET(BCM4377_MSGID_ID, raw_msgid);
|
|
|
|
if (generation != ring->generation) {
|
|
dev_warn(
|
|
&bcm4377->pdev->dev,
|
|
"invalid message generation %d should be %d in entry for ring %d\n",
|
|
generation, ring->generation, ring->ring_id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (*msgid >= ring->n_entries) {
|
|
dev_warn(&bcm4377->pdev->dev,
|
|
"invalid message id in entry for ring %d: %d > %d\n",
|
|
ring->ring_id, *msgid, ring->n_entries);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bcm4377_handle_event(struct bcm4377_data *bcm4377,
|
|
struct bcm4377_transfer_ring *ring,
|
|
u16 raw_msgid, u8 entry_flags, u8 type,
|
|
void *payload, size_t len)
|
|
{
|
|
struct sk_buff *skb;
|
|
u16 head;
|
|
u8 msgid;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ring->lock, flags);
|
|
if (!ring->enabled) {
|
|
dev_warn(&bcm4377->pdev->dev,
|
|
"event for disabled transfer ring %d\n",
|
|
ring->ring_id);
|
|
goto out;
|
|
}
|
|
|
|
if (ring->d2h_buffers_only &&
|
|
entry_flags & BCM4377_XFER_RING_FLAG_PAYLOAD_MAPPED) {
|
|
if (bcm4377_extract_msgid(bcm4377, ring, raw_msgid, &msgid))
|
|
goto out;
|
|
|
|
if (len > ring->mapped_payload_size) {
|
|
dev_warn(
|
|
&bcm4377->pdev->dev,
|
|
"invalid payload len in event for ring %d: %zu > %zu\n",
|
|
ring->ring_id, len, ring->mapped_payload_size);
|
|
goto out;
|
|
}
|
|
|
|
payload = ring->payloads + msgid * ring->mapped_payload_size;
|
|
}
|
|
|
|
skb = bt_skb_alloc(len, GFP_ATOMIC);
|
|
if (!skb)
|
|
goto out;
|
|
|
|
memcpy(skb_put(skb, len), payload, len);
|
|
hci_skb_pkt_type(skb) = type;
|
|
hci_recv_frame(bcm4377->hdev, skb);
|
|
|
|
out:
|
|
head = le16_to_cpu(bcm4377->ring_state->xfer_ring_head[ring->ring_id]);
|
|
head = (head + 1) % ring->n_entries;
|
|
bcm4377->ring_state->xfer_ring_head[ring->ring_id] = cpu_to_le16(head);
|
|
|
|
bcm4377_ring_doorbell(bcm4377, ring->doorbell, head);
|
|
|
|
spin_unlock_irqrestore(&ring->lock, flags);
|
|
}
|
|
|
|
static void bcm4377_handle_ack(struct bcm4377_data *bcm4377,
|
|
struct bcm4377_transfer_ring *ring,
|
|
u16 raw_msgid)
|
|
{
|
|
unsigned long flags;
|
|
u8 msgid;
|
|
|
|
spin_lock_irqsave(&ring->lock, flags);
|
|
|
|
if (bcm4377_extract_msgid(bcm4377, ring, raw_msgid, &msgid))
|
|
goto unlock;
|
|
|
|
if (!test_bit(msgid, ring->msgids)) {
|
|
dev_warn(
|
|
&bcm4377->pdev->dev,
|
|
"invalid message id in ack for ring %d: %d is not used\n",
|
|
ring->ring_id, msgid);
|
|
goto unlock;
|
|
}
|
|
|
|
if (ring->allow_wait && ring->events[msgid]) {
|
|
complete(ring->events[msgid]);
|
|
ring->events[msgid] = NULL;
|
|
}
|
|
|
|
bitmap_release_region(ring->msgids, msgid, 0);
|
|
|
|
unlock:
|
|
spin_unlock_irqrestore(&ring->lock, flags);
|
|
}
|
|
|
|
static void bcm4377_handle_completion(struct bcm4377_data *bcm4377,
|
|
struct bcm4377_completion_ring *ring,
|
|
u16 pos)
|
|
{
|
|
struct bcm4377_completion_ring_entry *entry;
|
|
u16 msg_id, transfer_ring;
|
|
size_t entry_size, data_len;
|
|
void *data;
|
|
|
|
if (pos >= ring->n_entries) {
|
|
dev_warn(&bcm4377->pdev->dev,
|
|
"invalid offset %d for completion ring %d\n", pos,
|
|
ring->ring_id);
|
|
return;
|
|
}
|
|
|
|
entry_size = sizeof(*entry) + ring->payload_size;
|
|
entry = ring->ring + pos * entry_size;
|
|
data = ring->ring + pos * entry_size + sizeof(*entry);
|
|
data_len = le32_to_cpu(entry->len);
|
|
msg_id = le16_to_cpu(entry->msg_id);
|
|
transfer_ring = le16_to_cpu(entry->ring_id);
|
|
|
|
if ((ring->transfer_rings & BIT(transfer_ring)) == 0) {
|
|
dev_warn(
|
|
&bcm4377->pdev->dev,
|
|
"invalid entry at offset %d for transfer ring %d in completion ring %d\n",
|
|
pos, transfer_ring, ring->ring_id);
|
|
return;
|
|
}
|
|
|
|
dev_dbg(&bcm4377->pdev->dev,
|
|
"entry in completion ring %d for transfer ring %d with msg_id %d\n",
|
|
ring->ring_id, transfer_ring, msg_id);
|
|
|
|
switch (transfer_ring) {
|
|
case BCM4377_XFER_RING_CONTROL:
|
|
bcm4377_handle_ack(bcm4377, &bcm4377->control_h2d_ring, msg_id);
|
|
break;
|
|
case BCM4377_XFER_RING_HCI_H2D:
|
|
bcm4377_handle_ack(bcm4377, &bcm4377->hci_h2d_ring, msg_id);
|
|
break;
|
|
case BCM4377_XFER_RING_SCO_H2D:
|
|
bcm4377_handle_ack(bcm4377, &bcm4377->sco_h2d_ring, msg_id);
|
|
break;
|
|
case BCM4377_XFER_RING_ACL_H2D:
|
|
bcm4377_handle_ack(bcm4377, &bcm4377->acl_h2d_ring, msg_id);
|
|
break;
|
|
|
|
case BCM4377_XFER_RING_HCI_D2H:
|
|
bcm4377_handle_event(bcm4377, &bcm4377->hci_d2h_ring, msg_id,
|
|
entry->flags, HCI_EVENT_PKT, data,
|
|
data_len);
|
|
break;
|
|
case BCM4377_XFER_RING_SCO_D2H:
|
|
bcm4377_handle_event(bcm4377, &bcm4377->sco_d2h_ring, msg_id,
|
|
entry->flags, HCI_SCODATA_PKT, data,
|
|
data_len);
|
|
break;
|
|
case BCM4377_XFER_RING_ACL_D2H:
|
|
bcm4377_handle_event(bcm4377, &bcm4377->acl_d2h_ring, msg_id,
|
|
entry->flags, HCI_ACLDATA_PKT, data,
|
|
data_len);
|
|
break;
|
|
|
|
default:
|
|
dev_warn(
|
|
&bcm4377->pdev->dev,
|
|
"entry in completion ring %d for unknown transfer ring %d with msg_id %d\n",
|
|
ring->ring_id, transfer_ring, msg_id);
|
|
}
|
|
}
|
|
|
|
static void bcm4377_poll_completion_ring(struct bcm4377_data *bcm4377,
|
|
struct bcm4377_completion_ring *ring)
|
|
{
|
|
u16 tail;
|
|
__le16 *heads = bcm4377->ring_state->completion_ring_head;
|
|
__le16 *tails = bcm4377->ring_state->completion_ring_tail;
|
|
|
|
if (!ring->enabled)
|
|
return;
|
|
|
|
tail = le16_to_cpu(tails[ring->ring_id]);
|
|
dev_dbg(&bcm4377->pdev->dev,
|
|
"completion ring #%d: head: %d, tail: %d\n", ring->ring_id,
|
|
le16_to_cpu(heads[ring->ring_id]), tail);
|
|
|
|
while (tail != le16_to_cpu(READ_ONCE(heads[ring->ring_id]))) {
|
|
/*
|
|
* ensure the CPU doesn't speculate through the comparison.
|
|
* otherwise it might already read the (empty) queue entry
|
|
* before the updated head has been loaded and checked.
|
|
*/
|
|
dma_rmb();
|
|
|
|
bcm4377_handle_completion(bcm4377, ring, tail);
|
|
|
|
tail = (tail + 1) % ring->n_entries;
|
|
tails[ring->ring_id] = cpu_to_le16(tail);
|
|
}
|
|
}
|
|
|
|
static irqreturn_t bcm4377_irq(int irq, void *data)
|
|
{
|
|
struct bcm4377_data *bcm4377 = data;
|
|
u32 bootstage, rti_status;
|
|
|
|
bootstage = ioread32(bcm4377->bar2 + BCM4377_BAR2_BOOTSTAGE);
|
|
rti_status = ioread32(bcm4377->bar2 + BCM4377_BAR2_RTI_STATUS);
|
|
|
|
if (bootstage != bcm4377->bootstage ||
|
|
rti_status != bcm4377->rti_status) {
|
|
dev_dbg(&bcm4377->pdev->dev,
|
|
"bootstage = %d -> %d, rti state = %d -> %d\n",
|
|
bcm4377->bootstage, bootstage, bcm4377->rti_status,
|
|
rti_status);
|
|
complete(&bcm4377->event);
|
|
bcm4377->bootstage = bootstage;
|
|
bcm4377->rti_status = rti_status;
|
|
}
|
|
|
|
if (rti_status > 2)
|
|
dev_err(&bcm4377->pdev->dev, "RTI status is %d\n", rti_status);
|
|
|
|
bcm4377_poll_completion_ring(bcm4377, &bcm4377->control_ack_ring);
|
|
bcm4377_poll_completion_ring(bcm4377, &bcm4377->hci_acl_event_ring);
|
|
bcm4377_poll_completion_ring(bcm4377, &bcm4377->hci_acl_ack_ring);
|
|
bcm4377_poll_completion_ring(bcm4377, &bcm4377->sco_ack_ring);
|
|
bcm4377_poll_completion_ring(bcm4377, &bcm4377->sco_event_ring);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int bcm4377_enqueue(struct bcm4377_data *bcm4377,
|
|
struct bcm4377_transfer_ring *ring, void *data,
|
|
size_t len, bool wait)
|
|
{
|
|
unsigned long flags;
|
|
struct bcm4377_xfer_ring_entry *entry;
|
|
void *payload;
|
|
size_t offset;
|
|
u16 head, tail, new_head;
|
|
u16 raw_msgid;
|
|
int ret, msgid;
|
|
DECLARE_COMPLETION_ONSTACK(event);
|
|
|
|
if (len > ring->payload_size && len > ring->mapped_payload_size) {
|
|
dev_warn(
|
|
&bcm4377->pdev->dev,
|
|
"payload len %zu is too large for ring %d (max is %zu or %zu)\n",
|
|
len, ring->ring_id, ring->payload_size,
|
|
ring->mapped_payload_size);
|
|
return -EINVAL;
|
|
}
|
|
if (wait && !ring->allow_wait)
|
|
return -EINVAL;
|
|
if (ring->virtual)
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&ring->lock, flags);
|
|
|
|
head = le16_to_cpu(bcm4377->ring_state->xfer_ring_head[ring->ring_id]);
|
|
tail = le16_to_cpu(bcm4377->ring_state->xfer_ring_tail[ring->ring_id]);
|
|
|
|
new_head = (head + 1) % ring->n_entries;
|
|
|
|
if (new_head == tail) {
|
|
dev_warn(&bcm4377->pdev->dev,
|
|
"can't send message because ring %d is full\n",
|
|
ring->ring_id);
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
msgid = bitmap_find_free_region(ring->msgids, ring->n_entries, 0);
|
|
if (msgid < 0) {
|
|
dev_warn(&bcm4377->pdev->dev,
|
|
"can't find message id for ring %d\n", ring->ring_id);
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
raw_msgid = FIELD_PREP(BCM4377_MSGID_GENERATION, ring->generation);
|
|
raw_msgid |= FIELD_PREP(BCM4377_MSGID_ID, msgid);
|
|
|
|
offset = head * (sizeof(*entry) + ring->payload_size);
|
|
entry = ring->ring + offset;
|
|
|
|
memset(entry, 0, sizeof(*entry));
|
|
entry->id = cpu_to_le16(raw_msgid);
|
|
entry->len = cpu_to_le16(len);
|
|
|
|
if (len <= ring->payload_size) {
|
|
entry->flags = BCM4377_XFER_RING_FLAG_PAYLOAD_IN_FOOTER;
|
|
payload = ring->ring + offset + sizeof(*entry);
|
|
} else {
|
|
entry->flags = BCM4377_XFER_RING_FLAG_PAYLOAD_MAPPED;
|
|
entry->payload = cpu_to_le64(ring->payloads_dma +
|
|
msgid * ring->mapped_payload_size);
|
|
payload = ring->payloads + msgid * ring->mapped_payload_size;
|
|
}
|
|
|
|
memcpy(payload, data, len);
|
|
|
|
if (wait)
|
|
ring->events[msgid] = &event;
|
|
|
|
/*
|
|
* The 4377 chips stop responding to any commands as soon as they
|
|
* have been idle for a while. Poking the sleep control register here
|
|
* makes them come alive again.
|
|
*/
|
|
iowrite32(BCM4377_BAR0_SLEEP_CONTROL_AWAKE,
|
|
bcm4377->bar0 + BCM4377_BAR0_SLEEP_CONTROL);
|
|
|
|
dev_dbg(&bcm4377->pdev->dev,
|
|
"updating head for transfer queue #%d to %d\n", ring->ring_id,
|
|
new_head);
|
|
bcm4377->ring_state->xfer_ring_head[ring->ring_id] =
|
|
cpu_to_le16(new_head);
|
|
|
|
if (!ring->sync)
|
|
bcm4377_ring_doorbell(bcm4377, ring->doorbell, new_head);
|
|
ret = 0;
|
|
|
|
out:
|
|
spin_unlock_irqrestore(&ring->lock, flags);
|
|
|
|
if (ret == 0 && wait) {
|
|
ret = wait_for_completion_interruptible_timeout(
|
|
&event, BCM4377_TIMEOUT);
|
|
if (ret == 0)
|
|
ret = -ETIMEDOUT;
|
|
else if (ret > 0)
|
|
ret = 0;
|
|
|
|
spin_lock_irqsave(&ring->lock, flags);
|
|
ring->events[msgid] = NULL;
|
|
spin_unlock_irqrestore(&ring->lock, flags);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int bcm4377_create_completion_ring(struct bcm4377_data *bcm4377,
|
|
struct bcm4377_completion_ring *ring)
|
|
{
|
|
struct bcm4377_create_completion_ring_msg msg;
|
|
int ret;
|
|
|
|
if (ring->enabled) {
|
|
dev_warn(&bcm4377->pdev->dev,
|
|
"completion ring %d already enabled\n", ring->ring_id);
|
|
return 0;
|
|
}
|
|
|
|
memset(ring->ring, 0,
|
|
ring->n_entries * (sizeof(struct bcm4377_completion_ring_entry) +
|
|
ring->payload_size));
|
|
memset(&msg, 0, sizeof(msg));
|
|
msg.msg_type = BCM4377_CONTROL_MSG_CREATE_COMPLETION_RING;
|
|
msg.id = cpu_to_le16(ring->ring_id);
|
|
msg.id_again = cpu_to_le16(ring->ring_id);
|
|
msg.ring_iova = cpu_to_le64(ring->ring_dma);
|
|
msg.n_elements = cpu_to_le16(ring->n_entries);
|
|
msg.intmod_bytes = cpu_to_le32(0xffffffff);
|
|
msg.unk = cpu_to_le32(0xffffffff);
|
|
msg.intmod_delay = cpu_to_le16(ring->delay);
|
|
msg.footer_size = ring->payload_size / 4;
|
|
|
|
ret = bcm4377_enqueue(bcm4377, &bcm4377->control_h2d_ring, &msg,
|
|
sizeof(msg), true);
|
|
if (!ret)
|
|
ring->enabled = true;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int bcm4377_destroy_completion_ring(struct bcm4377_data *bcm4377,
|
|
struct bcm4377_completion_ring *ring)
|
|
{
|
|
struct bcm4377_destroy_completion_ring_msg msg;
|
|
int ret;
|
|
|
|
memset(&msg, 0, sizeof(msg));
|
|
msg.msg_type = BCM4377_CONTROL_MSG_DESTROY_COMPLETION_RING;
|
|
msg.ring_id = cpu_to_le16(ring->ring_id);
|
|
|
|
ret = bcm4377_enqueue(bcm4377, &bcm4377->control_h2d_ring, &msg,
|
|
sizeof(msg), true);
|
|
if (ret)
|
|
dev_warn(&bcm4377->pdev->dev,
|
|
"failed to destroy completion ring %d\n",
|
|
ring->ring_id);
|
|
|
|
ring->enabled = false;
|
|
return ret;
|
|
}
|
|
|
|
static int bcm4377_create_transfer_ring(struct bcm4377_data *bcm4377,
|
|
struct bcm4377_transfer_ring *ring)
|
|
{
|
|
struct bcm4377_create_transfer_ring_msg msg;
|
|
u16 flags = 0;
|
|
int ret, i;
|
|
unsigned long spinlock_flags;
|
|
|
|
if (ring->virtual)
|
|
flags |= BCM4377_XFER_RING_FLAG_VIRTUAL;
|
|
if (ring->sync)
|
|
flags |= BCM4377_XFER_RING_FLAG_SYNC;
|
|
|
|
spin_lock_irqsave(&ring->lock, spinlock_flags);
|
|
memset(&msg, 0, sizeof(msg));
|
|
msg.msg_type = BCM4377_CONTROL_MSG_CREATE_XFER_RING;
|
|
msg.ring_id = cpu_to_le16(ring->ring_id);
|
|
msg.ring_id_again = cpu_to_le16(ring->ring_id);
|
|
msg.ring_iova = cpu_to_le64(ring->ring_dma);
|
|
msg.n_elements = cpu_to_le16(ring->n_entries);
|
|
msg.completion_ring_id = cpu_to_le16(ring->completion_ring);
|
|
msg.doorbell = cpu_to_le16(ring->doorbell);
|
|
msg.flags = cpu_to_le16(flags);
|
|
msg.footer_size = ring->payload_size / 4;
|
|
|
|
bcm4377->ring_state->xfer_ring_head[ring->ring_id] = 0;
|
|
bcm4377->ring_state->xfer_ring_tail[ring->ring_id] = 0;
|
|
ring->generation++;
|
|
spin_unlock_irqrestore(&ring->lock, spinlock_flags);
|
|
|
|
ret = bcm4377_enqueue(bcm4377, &bcm4377->control_h2d_ring, &msg,
|
|
sizeof(msg), true);
|
|
|
|
spin_lock_irqsave(&ring->lock, spinlock_flags);
|
|
|
|
if (ring->d2h_buffers_only) {
|
|
for (i = 0; i < ring->n_entries; ++i) {
|
|
struct bcm4377_xfer_ring_entry *entry =
|
|
ring->ring + i * sizeof(*entry);
|
|
u16 raw_msgid = FIELD_PREP(BCM4377_MSGID_GENERATION,
|
|
ring->generation);
|
|
raw_msgid |= FIELD_PREP(BCM4377_MSGID_ID, i);
|
|
|
|
memset(entry, 0, sizeof(*entry));
|
|
entry->id = cpu_to_le16(raw_msgid);
|
|
entry->len = cpu_to_le16(ring->mapped_payload_size);
|
|
entry->flags = BCM4377_XFER_RING_FLAG_PAYLOAD_MAPPED;
|
|
entry->payload =
|
|
cpu_to_le64(ring->payloads_dma +
|
|
i * ring->mapped_payload_size);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* send some messages if this is a device->host ring to allow the device
|
|
* to reply by acknowledging them in the completion ring
|
|
*/
|
|
if (ring->virtual || ring->d2h_buffers_only) {
|
|
bcm4377->ring_state->xfer_ring_head[ring->ring_id] =
|
|
cpu_to_le16(0xf);
|
|
bcm4377_ring_doorbell(bcm4377, ring->doorbell, 0xf);
|
|
}
|
|
|
|
ring->enabled = true;
|
|
spin_unlock_irqrestore(&ring->lock, spinlock_flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int bcm4377_destroy_transfer_ring(struct bcm4377_data *bcm4377,
|
|
struct bcm4377_transfer_ring *ring)
|
|
{
|
|
struct bcm4377_destroy_transfer_ring_msg msg;
|
|
int ret;
|
|
|
|
memset(&msg, 0, sizeof(msg));
|
|
msg.msg_type = BCM4377_CONTROL_MSG_DESTROY_XFER_RING;
|
|
msg.ring_id = cpu_to_le16(ring->ring_id);
|
|
|
|
ret = bcm4377_enqueue(bcm4377, &bcm4377->control_h2d_ring, &msg,
|
|
sizeof(msg), true);
|
|
if (ret)
|
|
dev_warn(&bcm4377->pdev->dev,
|
|
"failed to destroy transfer ring %d\n", ring->ring_id);
|
|
|
|
ring->enabled = false;
|
|
return ret;
|
|
}
|
|
|
|
static int __bcm4378_send_calibration_chunk(struct bcm4377_data *bcm4377,
|
|
const void *data, size_t data_len,
|
|
u16 blocks_left)
|
|
{
|
|
struct bcm4378_hci_send_calibration_cmd cmd;
|
|
struct sk_buff *skb;
|
|
|
|
if (data_len > sizeof(cmd.data))
|
|
return -EINVAL;
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
cmd.unk = 0x03;
|
|
cmd.blocks_left = cpu_to_le16(blocks_left);
|
|
memcpy(cmd.data, data, data_len);
|
|
|
|
skb = __hci_cmd_sync(bcm4377->hdev, 0xfd97, sizeof(cmd), &cmd,
|
|
HCI_INIT_TIMEOUT);
|
|
if (IS_ERR(skb))
|
|
return PTR_ERR(skb);
|
|
|
|
kfree_skb(skb);
|
|
return 0;
|
|
}
|
|
|
|
static int __bcm4378_send_calibration(struct bcm4377_data *bcm4377,
|
|
const void *data, size_t data_size)
|
|
{
|
|
int ret;
|
|
size_t i, left, transfer_len;
|
|
size_t blocks =
|
|
DIV_ROUND_UP(data_size, (size_t)BCM4378_CALIBRATION_CHUNK_SIZE);
|
|
|
|
if (!data) {
|
|
dev_err(&bcm4377->pdev->dev,
|
|
"no calibration data available.\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
for (i = 0, left = data_size; i < blocks; ++i, left -= transfer_len) {
|
|
transfer_len =
|
|
min_t(size_t, left, BCM4378_CALIBRATION_CHUNK_SIZE);
|
|
|
|
ret = __bcm4378_send_calibration_chunk(
|
|
bcm4377, data + i * BCM4378_CALIBRATION_CHUNK_SIZE,
|
|
transfer_len, blocks - i - 1);
|
|
if (ret) {
|
|
dev_err(&bcm4377->pdev->dev,
|
|
"send calibration chunk failed with %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm4378_send_calibration(struct bcm4377_data *bcm4377)
|
|
{
|
|
if ((strcmp(bcm4377->stepping, "b1") == 0) ||
|
|
strcmp(bcm4377->stepping, "b3") == 0)
|
|
return __bcm4378_send_calibration(
|
|
bcm4377, bcm4377->taurus_beamforming_cal_blob,
|
|
bcm4377->taurus_beamforming_cal_size);
|
|
else
|
|
return __bcm4378_send_calibration(bcm4377,
|
|
bcm4377->taurus_cal_blob,
|
|
bcm4377->taurus_cal_size);
|
|
}
|
|
|
|
static int bcm4387_send_calibration(struct bcm4377_data *bcm4377)
|
|
{
|
|
if (strcmp(bcm4377->stepping, "c2") == 0)
|
|
return __bcm4378_send_calibration(
|
|
bcm4377, bcm4377->taurus_beamforming_cal_blob,
|
|
bcm4377->taurus_beamforming_cal_size);
|
|
else
|
|
return __bcm4378_send_calibration(bcm4377,
|
|
bcm4377->taurus_cal_blob,
|
|
bcm4377->taurus_cal_size);
|
|
}
|
|
|
|
static const struct firmware *bcm4377_request_blob(struct bcm4377_data *bcm4377,
|
|
const char *suffix)
|
|
{
|
|
const struct firmware *fw;
|
|
char name0[64], name1[64];
|
|
int ret;
|
|
|
|
snprintf(name0, sizeof(name0), "brcm/brcmbt%04x%s-%s-%s.%s",
|
|
bcm4377->hw->id, bcm4377->stepping, bcm4377->board_type,
|
|
bcm4377->vendor, suffix);
|
|
snprintf(name1, sizeof(name1), "brcm/brcmbt%04x%s-%s.%s",
|
|
bcm4377->hw->id, bcm4377->stepping, bcm4377->board_type,
|
|
suffix);
|
|
dev_dbg(&bcm4377->pdev->dev, "Trying to load firmware: '%s' or '%s'\n",
|
|
name0, name1);
|
|
|
|
ret = firmware_request_nowarn(&fw, name0, &bcm4377->pdev->dev);
|
|
if (!ret)
|
|
return fw;
|
|
ret = firmware_request_nowarn(&fw, name1, &bcm4377->pdev->dev);
|
|
if (!ret)
|
|
return fw;
|
|
|
|
dev_err(&bcm4377->pdev->dev,
|
|
"Unable to load firmware; tried '%s' and '%s'\n", name0, name1);
|
|
return NULL;
|
|
}
|
|
|
|
static int bcm4377_send_ptb(struct bcm4377_data *bcm4377,
|
|
const struct firmware *fw)
|
|
{
|
|
struct sk_buff *skb;
|
|
|
|
skb = __hci_cmd_sync(bcm4377->hdev, 0xfd98, fw->size, fw->data,
|
|
HCI_INIT_TIMEOUT);
|
|
/*
|
|
* This command seems to always fail on more recent firmware versions
|
|
* (even in traces taken from the macOS driver). It's unclear why this
|
|
* happens but because the PTB file contains calibration and/or
|
|
* regulatory data and may be required on older firmware we still try to
|
|
* send it here just in case and just ignore if it fails.
|
|
*/
|
|
if (!IS_ERR(skb))
|
|
kfree_skb(skb);
|
|
return 0;
|
|
}
|
|
|
|
static int bcm4378_send_ptb_chunk(struct bcm4377_data *bcm4377,
|
|
const void *data, size_t data_len,
|
|
u16 blocks_left)
|
|
{
|
|
struct bcm4378_hci_send_ptb_cmd cmd;
|
|
struct sk_buff *skb;
|
|
|
|
if (data_len > BCM4378_PTB_CHUNK_SIZE)
|
|
return -EINVAL;
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
cmd.blocks_left = cpu_to_le16(blocks_left);
|
|
memcpy(cmd.data, data, data_len);
|
|
|
|
skb = __hci_cmd_sync(bcm4377->hdev, 0xfe0d, sizeof(cmd), &cmd,
|
|
HCI_INIT_TIMEOUT);
|
|
if (IS_ERR(skb))
|
|
return PTR_ERR(skb);
|
|
|
|
kfree_skb(skb);
|
|
return 0;
|
|
}
|
|
|
|
static int bcm4378_send_ptb(struct bcm4377_data *bcm4377,
|
|
const struct firmware *fw)
|
|
{
|
|
size_t chunks = DIV_ROUND_UP(fw->size, (size_t)BCM4378_PTB_CHUNK_SIZE);
|
|
size_t i, left, transfer_len;
|
|
int ret;
|
|
|
|
for (i = 0, left = fw->size; i < chunks; ++i, left -= transfer_len) {
|
|
transfer_len = min_t(size_t, left, BCM4378_PTB_CHUNK_SIZE);
|
|
|
|
dev_dbg(&bcm4377->pdev->dev, "sending ptb chunk %zu/%zu\n",
|
|
i + 1, chunks);
|
|
ret = bcm4378_send_ptb_chunk(
|
|
bcm4377, fw->data + i * BCM4378_PTB_CHUNK_SIZE,
|
|
transfer_len, chunks - i - 1);
|
|
if (ret) {
|
|
dev_err(&bcm4377->pdev->dev,
|
|
"sending ptb chunk %zu failed (%d)", i, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm4377_hci_open(struct hci_dev *hdev)
|
|
{
|
|
struct bcm4377_data *bcm4377 = hci_get_drvdata(hdev);
|
|
int ret;
|
|
|
|
dev_dbg(&bcm4377->pdev->dev, "creating rings\n");
|
|
|
|
ret = bcm4377_create_completion_ring(bcm4377,
|
|
&bcm4377->hci_acl_ack_ring);
|
|
if (ret)
|
|
return ret;
|
|
ret = bcm4377_create_completion_ring(bcm4377,
|
|
&bcm4377->hci_acl_event_ring);
|
|
if (ret)
|
|
goto destroy_hci_acl_ack;
|
|
ret = bcm4377_create_completion_ring(bcm4377, &bcm4377->sco_ack_ring);
|
|
if (ret)
|
|
goto destroy_hci_acl_event;
|
|
ret = bcm4377_create_completion_ring(bcm4377, &bcm4377->sco_event_ring);
|
|
if (ret)
|
|
goto destroy_sco_ack;
|
|
dev_dbg(&bcm4377->pdev->dev,
|
|
"all completion rings successfully created!\n");
|
|
|
|
ret = bcm4377_create_transfer_ring(bcm4377, &bcm4377->hci_h2d_ring);
|
|
if (ret)
|
|
goto destroy_sco_event;
|
|
ret = bcm4377_create_transfer_ring(bcm4377, &bcm4377->hci_d2h_ring);
|
|
if (ret)
|
|
goto destroy_hci_h2d;
|
|
ret = bcm4377_create_transfer_ring(bcm4377, &bcm4377->sco_h2d_ring);
|
|
if (ret)
|
|
goto destroy_hci_d2h;
|
|
ret = bcm4377_create_transfer_ring(bcm4377, &bcm4377->sco_d2h_ring);
|
|
if (ret)
|
|
goto destroy_sco_h2d;
|
|
ret = bcm4377_create_transfer_ring(bcm4377, &bcm4377->acl_h2d_ring);
|
|
if (ret)
|
|
goto destroy_sco_d2h;
|
|
ret = bcm4377_create_transfer_ring(bcm4377, &bcm4377->acl_d2h_ring);
|
|
if (ret)
|
|
goto destroy_acl_h2d;
|
|
dev_dbg(&bcm4377->pdev->dev,
|
|
"all transfer rings successfully created!\n");
|
|
|
|
return 0;
|
|
|
|
destroy_acl_h2d:
|
|
bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->acl_h2d_ring);
|
|
destroy_sco_d2h:
|
|
bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->sco_d2h_ring);
|
|
destroy_sco_h2d:
|
|
bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->sco_h2d_ring);
|
|
destroy_hci_d2h:
|
|
bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->hci_h2d_ring);
|
|
destroy_hci_h2d:
|
|
bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->hci_d2h_ring);
|
|
destroy_sco_event:
|
|
bcm4377_destroy_completion_ring(bcm4377, &bcm4377->sco_event_ring);
|
|
destroy_sco_ack:
|
|
bcm4377_destroy_completion_ring(bcm4377, &bcm4377->sco_ack_ring);
|
|
destroy_hci_acl_event:
|
|
bcm4377_destroy_completion_ring(bcm4377, &bcm4377->hci_acl_event_ring);
|
|
destroy_hci_acl_ack:
|
|
bcm4377_destroy_completion_ring(bcm4377, &bcm4377->hci_acl_ack_ring);
|
|
|
|
dev_err(&bcm4377->pdev->dev, "Creating rings failed with %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int bcm4377_hci_close(struct hci_dev *hdev)
|
|
{
|
|
struct bcm4377_data *bcm4377 = hci_get_drvdata(hdev);
|
|
|
|
dev_dbg(&bcm4377->pdev->dev, "destroying rings in hci_close\n");
|
|
|
|
bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->acl_d2h_ring);
|
|
bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->acl_h2d_ring);
|
|
bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->sco_d2h_ring);
|
|
bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->sco_h2d_ring);
|
|
bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->hci_d2h_ring);
|
|
bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->hci_h2d_ring);
|
|
|
|
bcm4377_destroy_completion_ring(bcm4377, &bcm4377->sco_event_ring);
|
|
bcm4377_destroy_completion_ring(bcm4377, &bcm4377->sco_ack_ring);
|
|
bcm4377_destroy_completion_ring(bcm4377, &bcm4377->hci_acl_event_ring);
|
|
bcm4377_destroy_completion_ring(bcm4377, &bcm4377->hci_acl_ack_ring);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool bcm4377_is_valid_bdaddr(struct bcm4377_data *bcm4377,
|
|
bdaddr_t *addr)
|
|
{
|
|
if (addr->b[0] != 0x93)
|
|
return true;
|
|
if (addr->b[1] != 0x76)
|
|
return true;
|
|
if (addr->b[2] != 0x00)
|
|
return true;
|
|
if (addr->b[4] != (bcm4377->hw->id & 0xff))
|
|
return true;
|
|
if (addr->b[5] != (bcm4377->hw->id >> 8))
|
|
return true;
|
|
return false;
|
|
}
|
|
|
|
static int bcm4377_check_bdaddr(struct bcm4377_data *bcm4377)
|
|
{
|
|
struct hci_rp_read_bd_addr *bda;
|
|
struct sk_buff *skb;
|
|
|
|
skb = __hci_cmd_sync(bcm4377->hdev, HCI_OP_READ_BD_ADDR, 0, NULL,
|
|
HCI_INIT_TIMEOUT);
|
|
if (IS_ERR(skb)) {
|
|
int err = PTR_ERR(skb);
|
|
|
|
dev_err(&bcm4377->pdev->dev, "HCI_OP_READ_BD_ADDR failed (%d)",
|
|
err);
|
|
return err;
|
|
}
|
|
|
|
if (skb->len != sizeof(*bda)) {
|
|
dev_err(&bcm4377->pdev->dev,
|
|
"HCI_OP_READ_BD_ADDR reply length invalid");
|
|
kfree_skb(skb);
|
|
return -EIO;
|
|
}
|
|
|
|
bda = (struct hci_rp_read_bd_addr *)skb->data;
|
|
if (!bcm4377_is_valid_bdaddr(bcm4377, &bda->bdaddr))
|
|
set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &bcm4377->hdev->quirks);
|
|
|
|
kfree_skb(skb);
|
|
return 0;
|
|
}
|
|
|
|
static int bcm4377_hci_setup(struct hci_dev *hdev)
|
|
{
|
|
struct bcm4377_data *bcm4377 = hci_get_drvdata(hdev);
|
|
const struct firmware *fw;
|
|
int ret;
|
|
|
|
if (bcm4377->hw->send_calibration) {
|
|
ret = bcm4377->hw->send_calibration(bcm4377);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
fw = bcm4377_request_blob(bcm4377, "ptb");
|
|
if (!fw) {
|
|
dev_err(&bcm4377->pdev->dev, "failed to load PTB data");
|
|
return -ENOENT;
|
|
}
|
|
|
|
ret = bcm4377->hw->send_ptb(bcm4377, fw);
|
|
release_firmware(fw);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return bcm4377_check_bdaddr(bcm4377);
|
|
}
|
|
|
|
static int bcm4377_hci_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
|
|
{
|
|
struct bcm4377_data *bcm4377 = hci_get_drvdata(hdev);
|
|
struct bcm4377_transfer_ring *ring;
|
|
int ret;
|
|
|
|
switch (hci_skb_pkt_type(skb)) {
|
|
case HCI_COMMAND_PKT:
|
|
hdev->stat.cmd_tx++;
|
|
ring = &bcm4377->hci_h2d_ring;
|
|
break;
|
|
|
|
case HCI_ACLDATA_PKT:
|
|
hdev->stat.acl_tx++;
|
|
ring = &bcm4377->acl_h2d_ring;
|
|
break;
|
|
|
|
case HCI_SCODATA_PKT:
|
|
hdev->stat.sco_tx++;
|
|
ring = &bcm4377->sco_h2d_ring;
|
|
break;
|
|
|
|
default:
|
|
return -EILSEQ;
|
|
}
|
|
|
|
ret = bcm4377_enqueue(bcm4377, ring, skb->data, skb->len, false);
|
|
if (ret < 0) {
|
|
hdev->stat.err_tx++;
|
|
return ret;
|
|
}
|
|
|
|
hdev->stat.byte_tx += skb->len;
|
|
kfree_skb(skb);
|
|
return ret;
|
|
}
|
|
|
|
static int bcm4377_hci_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
|
|
{
|
|
struct bcm4377_data *bcm4377 = hci_get_drvdata(hdev);
|
|
struct sk_buff *skb;
|
|
int err;
|
|
|
|
skb = __hci_cmd_sync(hdev, 0xfc01, 6, bdaddr, HCI_INIT_TIMEOUT);
|
|
if (IS_ERR(skb)) {
|
|
err = PTR_ERR(skb);
|
|
dev_err(&bcm4377->pdev->dev,
|
|
"Change address command failed (%d)", err);
|
|
return err;
|
|
}
|
|
kfree_skb(skb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm4377_alloc_transfer_ring(struct bcm4377_data *bcm4377,
|
|
struct bcm4377_transfer_ring *ring)
|
|
{
|
|
size_t entry_size;
|
|
|
|
spin_lock_init(&ring->lock);
|
|
ring->payload_size = ALIGN(ring->payload_size, 4);
|
|
ring->mapped_payload_size = ALIGN(ring->mapped_payload_size, 4);
|
|
|
|
if (ring->payload_size > BCM4377_XFER_RING_MAX_INPLACE_PAYLOAD_SIZE)
|
|
return -EINVAL;
|
|
if (ring->n_entries > BCM4377_MAX_RING_SIZE)
|
|
return -EINVAL;
|
|
if (ring->virtual && ring->allow_wait)
|
|
return -EINVAL;
|
|
|
|
if (ring->d2h_buffers_only) {
|
|
if (ring->virtual)
|
|
return -EINVAL;
|
|
if (ring->payload_size)
|
|
return -EINVAL;
|
|
if (!ring->mapped_payload_size)
|
|
return -EINVAL;
|
|
}
|
|
if (ring->virtual)
|
|
return 0;
|
|
|
|
entry_size =
|
|
ring->payload_size + sizeof(struct bcm4377_xfer_ring_entry);
|
|
ring->ring = dmam_alloc_coherent(&bcm4377->pdev->dev,
|
|
ring->n_entries * entry_size,
|
|
&ring->ring_dma, GFP_KERNEL);
|
|
if (!ring->ring)
|
|
return -ENOMEM;
|
|
|
|
if (ring->allow_wait) {
|
|
ring->events = devm_kcalloc(&bcm4377->pdev->dev,
|
|
ring->n_entries,
|
|
sizeof(*ring->events), GFP_KERNEL);
|
|
if (!ring->events)
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (ring->mapped_payload_size) {
|
|
ring->payloads = dmam_alloc_coherent(
|
|
&bcm4377->pdev->dev,
|
|
ring->n_entries * ring->mapped_payload_size,
|
|
&ring->payloads_dma, GFP_KERNEL);
|
|
if (!ring->payloads)
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm4377_alloc_completion_ring(struct bcm4377_data *bcm4377,
|
|
struct bcm4377_completion_ring *ring)
|
|
{
|
|
size_t entry_size;
|
|
|
|
ring->payload_size = ALIGN(ring->payload_size, 4);
|
|
if (ring->payload_size > BCM4377_XFER_RING_MAX_INPLACE_PAYLOAD_SIZE)
|
|
return -EINVAL;
|
|
if (ring->n_entries > BCM4377_MAX_RING_SIZE)
|
|
return -EINVAL;
|
|
|
|
entry_size = ring->payload_size +
|
|
sizeof(struct bcm4377_completion_ring_entry);
|
|
|
|
ring->ring = dmam_alloc_coherent(&bcm4377->pdev->dev,
|
|
ring->n_entries * entry_size,
|
|
&ring->ring_dma, GFP_KERNEL);
|
|
if (!ring->ring)
|
|
return -ENOMEM;
|
|
return 0;
|
|
}
|
|
|
|
static int bcm4377_init_context(struct bcm4377_data *bcm4377)
|
|
{
|
|
struct device *dev = &bcm4377->pdev->dev;
|
|
dma_addr_t peripheral_info_dma;
|
|
|
|
bcm4377->ctx = dmam_alloc_coherent(dev, sizeof(*bcm4377->ctx),
|
|
&bcm4377->ctx_dma, GFP_KERNEL);
|
|
if (!bcm4377->ctx)
|
|
return -ENOMEM;
|
|
memset(bcm4377->ctx, 0, sizeof(*bcm4377->ctx));
|
|
|
|
bcm4377->ring_state =
|
|
dmam_alloc_coherent(dev, sizeof(*bcm4377->ring_state),
|
|
&bcm4377->ring_state_dma, GFP_KERNEL);
|
|
if (!bcm4377->ring_state)
|
|
return -ENOMEM;
|
|
memset(bcm4377->ring_state, 0, sizeof(*bcm4377->ring_state));
|
|
|
|
bcm4377->ctx->version = cpu_to_le16(1);
|
|
bcm4377->ctx->size = cpu_to_le16(sizeof(*bcm4377->ctx));
|
|
bcm4377->ctx->enabled_caps = cpu_to_le32(2);
|
|
|
|
/*
|
|
* The BT device will write 0x20 bytes of data to this buffer but
|
|
* the exact contents are unknown. It only needs to exist for BT
|
|
* to work such that we can just allocate and then ignore it.
|
|
*/
|
|
if (!dmam_alloc_coherent(&bcm4377->pdev->dev, 0x20,
|
|
&peripheral_info_dma, GFP_KERNEL))
|
|
return -ENOMEM;
|
|
bcm4377->ctx->peripheral_info_addr = cpu_to_le64(peripheral_info_dma);
|
|
|
|
bcm4377->ctx->xfer_ring_heads_addr = cpu_to_le64(
|
|
bcm4377->ring_state_dma +
|
|
offsetof(struct bcm4377_ring_state, xfer_ring_head));
|
|
bcm4377->ctx->xfer_ring_tails_addr = cpu_to_le64(
|
|
bcm4377->ring_state_dma +
|
|
offsetof(struct bcm4377_ring_state, xfer_ring_tail));
|
|
bcm4377->ctx->completion_ring_heads_addr = cpu_to_le64(
|
|
bcm4377->ring_state_dma +
|
|
offsetof(struct bcm4377_ring_state, completion_ring_head));
|
|
bcm4377->ctx->completion_ring_tails_addr = cpu_to_le64(
|
|
bcm4377->ring_state_dma +
|
|
offsetof(struct bcm4377_ring_state, completion_ring_tail));
|
|
|
|
bcm4377->ctx->n_completion_rings =
|
|
cpu_to_le16(BCM4377_N_COMPLETION_RINGS);
|
|
bcm4377->ctx->n_xfer_rings = cpu_to_le16(BCM4377_N_TRANSFER_RINGS);
|
|
|
|
bcm4377->ctx->control_completion_ring_addr =
|
|
cpu_to_le64(bcm4377->control_ack_ring.ring_dma);
|
|
bcm4377->ctx->control_completion_ring_n_entries =
|
|
cpu_to_le16(bcm4377->control_ack_ring.n_entries);
|
|
bcm4377->ctx->control_completion_ring_doorbell = cpu_to_le16(0xffff);
|
|
bcm4377->ctx->control_completion_ring_msi = 0;
|
|
bcm4377->ctx->control_completion_ring_header_size = 0;
|
|
bcm4377->ctx->control_completion_ring_footer_size = 0;
|
|
|
|
bcm4377->ctx->control_xfer_ring_addr =
|
|
cpu_to_le64(bcm4377->control_h2d_ring.ring_dma);
|
|
bcm4377->ctx->control_xfer_ring_n_entries =
|
|
cpu_to_le16(bcm4377->control_h2d_ring.n_entries);
|
|
bcm4377->ctx->control_xfer_ring_doorbell =
|
|
cpu_to_le16(bcm4377->control_h2d_ring.doorbell);
|
|
bcm4377->ctx->control_xfer_ring_msi = 0;
|
|
bcm4377->ctx->control_xfer_ring_header_size = 0;
|
|
bcm4377->ctx->control_xfer_ring_footer_size =
|
|
bcm4377->control_h2d_ring.payload_size / 4;
|
|
|
|
dev_dbg(&bcm4377->pdev->dev, "context initialized at IOVA %pad",
|
|
&bcm4377->ctx_dma);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm4377_prepare_rings(struct bcm4377_data *bcm4377)
|
|
{
|
|
int ret;
|
|
|
|
/*
|
|
* Even though many of these settings appear to be configurable
|
|
* when sending the "create ring" messages most of these are
|
|
* actually hardcoded in some (and quite possibly all) firmware versions
|
|
* and changing them on the host has no effect.
|
|
* Specifically, this applies to at least the doorbells, the transfer
|
|
* and completion ring ids and their mapping (e.g. both HCI and ACL
|
|
* entries will always be queued in completion rings 1 and 2 no matter
|
|
* what we configure here).
|
|
*/
|
|
bcm4377->control_ack_ring.ring_id = BCM4377_ACK_RING_CONTROL;
|
|
bcm4377->control_ack_ring.n_entries = 32;
|
|
bcm4377->control_ack_ring.transfer_rings =
|
|
BIT(BCM4377_XFER_RING_CONTROL);
|
|
|
|
bcm4377->hci_acl_ack_ring.ring_id = BCM4377_ACK_RING_HCI_ACL;
|
|
bcm4377->hci_acl_ack_ring.n_entries = 2 * BCM4377_RING_N_ENTRIES;
|
|
bcm4377->hci_acl_ack_ring.transfer_rings =
|
|
BIT(BCM4377_XFER_RING_HCI_H2D) | BIT(BCM4377_XFER_RING_ACL_H2D);
|
|
bcm4377->hci_acl_ack_ring.delay = 1000;
|
|
|
|
/*
|
|
* A payload size of MAX_EVENT_PAYLOAD_SIZE is enough here since large
|
|
* ACL packets will be transmitted inside buffers mapped via
|
|
* acl_d2h_ring anyway.
|
|
*/
|
|
bcm4377->hci_acl_event_ring.ring_id = BCM4377_EVENT_RING_HCI_ACL;
|
|
bcm4377->hci_acl_event_ring.payload_size = MAX_EVENT_PAYLOAD_SIZE;
|
|
bcm4377->hci_acl_event_ring.n_entries = 2 * BCM4377_RING_N_ENTRIES;
|
|
bcm4377->hci_acl_event_ring.transfer_rings =
|
|
BIT(BCM4377_XFER_RING_HCI_D2H) | BIT(BCM4377_XFER_RING_ACL_D2H);
|
|
bcm4377->hci_acl_event_ring.delay = 1000;
|
|
|
|
bcm4377->sco_ack_ring.ring_id = BCM4377_ACK_RING_SCO;
|
|
bcm4377->sco_ack_ring.n_entries = BCM4377_RING_N_ENTRIES;
|
|
bcm4377->sco_ack_ring.transfer_rings = BIT(BCM4377_XFER_RING_SCO_H2D);
|
|
|
|
bcm4377->sco_event_ring.ring_id = BCM4377_EVENT_RING_SCO;
|
|
bcm4377->sco_event_ring.payload_size = MAX_SCO_PAYLOAD_SIZE;
|
|
bcm4377->sco_event_ring.n_entries = BCM4377_RING_N_ENTRIES;
|
|
bcm4377->sco_event_ring.transfer_rings = BIT(BCM4377_XFER_RING_SCO_D2H);
|
|
|
|
bcm4377->control_h2d_ring.ring_id = BCM4377_XFER_RING_CONTROL;
|
|
bcm4377->control_h2d_ring.doorbell = BCM4377_DOORBELL_CONTROL;
|
|
bcm4377->control_h2d_ring.payload_size = BCM4377_CONTROL_MSG_SIZE;
|
|
bcm4377->control_h2d_ring.completion_ring = BCM4377_ACK_RING_CONTROL;
|
|
bcm4377->control_h2d_ring.allow_wait = true;
|
|
bcm4377->control_h2d_ring.n_entries = BCM4377_RING_N_ENTRIES;
|
|
|
|
bcm4377->hci_h2d_ring.ring_id = BCM4377_XFER_RING_HCI_H2D;
|
|
bcm4377->hci_h2d_ring.doorbell = BCM4377_DOORBELL_HCI_H2D;
|
|
bcm4377->hci_h2d_ring.payload_size = MAX_EVENT_PAYLOAD_SIZE;
|
|
bcm4377->hci_h2d_ring.completion_ring = BCM4377_ACK_RING_HCI_ACL;
|
|
bcm4377->hci_h2d_ring.n_entries = BCM4377_RING_N_ENTRIES;
|
|
|
|
bcm4377->hci_d2h_ring.ring_id = BCM4377_XFER_RING_HCI_D2H;
|
|
bcm4377->hci_d2h_ring.doorbell = BCM4377_DOORBELL_HCI_D2H;
|
|
bcm4377->hci_d2h_ring.completion_ring = BCM4377_EVENT_RING_HCI_ACL;
|
|
bcm4377->hci_d2h_ring.virtual = true;
|
|
bcm4377->hci_d2h_ring.n_entries = BCM4377_RING_N_ENTRIES;
|
|
|
|
bcm4377->sco_h2d_ring.ring_id = BCM4377_XFER_RING_SCO_H2D;
|
|
bcm4377->sco_h2d_ring.doorbell = BCM4377_DOORBELL_SCO;
|
|
bcm4377->sco_h2d_ring.payload_size = MAX_SCO_PAYLOAD_SIZE;
|
|
bcm4377->sco_h2d_ring.completion_ring = BCM4377_ACK_RING_SCO;
|
|
bcm4377->sco_h2d_ring.sync = true;
|
|
bcm4377->sco_h2d_ring.n_entries = BCM4377_RING_N_ENTRIES;
|
|
|
|
bcm4377->sco_d2h_ring.ring_id = BCM4377_XFER_RING_SCO_D2H;
|
|
bcm4377->sco_d2h_ring.doorbell = BCM4377_DOORBELL_SCO;
|
|
bcm4377->sco_d2h_ring.completion_ring = BCM4377_EVENT_RING_SCO;
|
|
bcm4377->sco_d2h_ring.virtual = true;
|
|
bcm4377->sco_d2h_ring.sync = true;
|
|
bcm4377->sco_d2h_ring.n_entries = BCM4377_RING_N_ENTRIES;
|
|
|
|
/*
|
|
* This ring has to use mapped_payload_size because the largest ACL
|
|
* packet doesn't fit inside the largest possible footer
|
|
*/
|
|
bcm4377->acl_h2d_ring.ring_id = BCM4377_XFER_RING_ACL_H2D;
|
|
bcm4377->acl_h2d_ring.doorbell = BCM4377_DOORBELL_ACL_H2D;
|
|
bcm4377->acl_h2d_ring.mapped_payload_size = MAX_ACL_PAYLOAD_SIZE;
|
|
bcm4377->acl_h2d_ring.completion_ring = BCM4377_ACK_RING_HCI_ACL;
|
|
bcm4377->acl_h2d_ring.n_entries = BCM4377_RING_N_ENTRIES;
|
|
|
|
/*
|
|
* This ring only contains empty buffers to be used by incoming
|
|
* ACL packets that do not fit inside the footer of hci_acl_event_ring
|
|
*/
|
|
bcm4377->acl_d2h_ring.ring_id = BCM4377_XFER_RING_ACL_D2H;
|
|
bcm4377->acl_d2h_ring.doorbell = BCM4377_DOORBELL_ACL_D2H;
|
|
bcm4377->acl_d2h_ring.completion_ring = BCM4377_EVENT_RING_HCI_ACL;
|
|
bcm4377->acl_d2h_ring.d2h_buffers_only = true;
|
|
bcm4377->acl_d2h_ring.mapped_payload_size = MAX_ACL_PAYLOAD_SIZE;
|
|
bcm4377->acl_d2h_ring.n_entries = BCM4377_RING_N_ENTRIES;
|
|
|
|
/*
|
|
* no need for any cleanup since this is only called from _probe
|
|
* and only devres-managed allocations are used
|
|
*/
|
|
ret = bcm4377_alloc_transfer_ring(bcm4377, &bcm4377->control_h2d_ring);
|
|
if (ret)
|
|
return ret;
|
|
ret = bcm4377_alloc_transfer_ring(bcm4377, &bcm4377->hci_h2d_ring);
|
|
if (ret)
|
|
return ret;
|
|
ret = bcm4377_alloc_transfer_ring(bcm4377, &bcm4377->hci_d2h_ring);
|
|
if (ret)
|
|
return ret;
|
|
ret = bcm4377_alloc_transfer_ring(bcm4377, &bcm4377->sco_h2d_ring);
|
|
if (ret)
|
|
return ret;
|
|
ret = bcm4377_alloc_transfer_ring(bcm4377, &bcm4377->sco_d2h_ring);
|
|
if (ret)
|
|
return ret;
|
|
ret = bcm4377_alloc_transfer_ring(bcm4377, &bcm4377->acl_h2d_ring);
|
|
if (ret)
|
|
return ret;
|
|
ret = bcm4377_alloc_transfer_ring(bcm4377, &bcm4377->acl_d2h_ring);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = bcm4377_alloc_completion_ring(bcm4377,
|
|
&bcm4377->control_ack_ring);
|
|
if (ret)
|
|
return ret;
|
|
ret = bcm4377_alloc_completion_ring(bcm4377,
|
|
&bcm4377->hci_acl_ack_ring);
|
|
if (ret)
|
|
return ret;
|
|
ret = bcm4377_alloc_completion_ring(bcm4377,
|
|
&bcm4377->hci_acl_event_ring);
|
|
if (ret)
|
|
return ret;
|
|
ret = bcm4377_alloc_completion_ring(bcm4377, &bcm4377->sco_ack_ring);
|
|
if (ret)
|
|
return ret;
|
|
ret = bcm4377_alloc_completion_ring(bcm4377, &bcm4377->sco_event_ring);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev_dbg(&bcm4377->pdev->dev, "all rings allocated and prepared\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm4377_boot(struct bcm4377_data *bcm4377)
|
|
{
|
|
const struct firmware *fw;
|
|
void *bfr;
|
|
dma_addr_t fw_dma;
|
|
int ret = 0;
|
|
u32 bootstage, rti_status;
|
|
|
|
bootstage = ioread32(bcm4377->bar2 + BCM4377_BAR2_BOOTSTAGE);
|
|
rti_status = ioread32(bcm4377->bar2 + BCM4377_BAR2_RTI_STATUS);
|
|
|
|
if (bootstage != 0) {
|
|
dev_err(&bcm4377->pdev->dev, "bootstage is %d and not 0\n",
|
|
bootstage);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (rti_status != 0) {
|
|
dev_err(&bcm4377->pdev->dev, "RTI status is %d and not 0\n",
|
|
rti_status);
|
|
return -EINVAL;
|
|
}
|
|
|
|
fw = bcm4377_request_blob(bcm4377, "bin");
|
|
if (!fw) {
|
|
dev_err(&bcm4377->pdev->dev, "Failed to load firmware\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
bfr = dma_alloc_coherent(&bcm4377->pdev->dev, fw->size, &fw_dma,
|
|
GFP_KERNEL);
|
|
if (!bfr) {
|
|
ret = -ENOMEM;
|
|
goto out_release_fw;
|
|
}
|
|
|
|
memcpy(bfr, fw->data, fw->size);
|
|
|
|
iowrite32(0, bcm4377->bar0 + BCM4377_BAR0_HOST_WINDOW_LO);
|
|
iowrite32(0, bcm4377->bar0 + BCM4377_BAR0_HOST_WINDOW_HI);
|
|
iowrite32(BCM4377_DMA_MASK,
|
|
bcm4377->bar0 + BCM4377_BAR0_HOST_WINDOW_SIZE);
|
|
|
|
iowrite32(lower_32_bits(fw_dma), bcm4377->bar2 + BCM4377_BAR2_FW_LO);
|
|
iowrite32(upper_32_bits(fw_dma), bcm4377->bar2 + BCM4377_BAR2_FW_HI);
|
|
iowrite32(fw->size, bcm4377->bar2 + BCM4377_BAR2_FW_SIZE);
|
|
iowrite32(0, bcm4377->bar0 + BCM4377_BAR0_FW_DOORBELL);
|
|
|
|
dev_dbg(&bcm4377->pdev->dev, "waiting for firmware to boot\n");
|
|
|
|
ret = wait_for_completion_interruptible_timeout(&bcm4377->event,
|
|
BCM4377_TIMEOUT);
|
|
if (ret == 0) {
|
|
ret = -ETIMEDOUT;
|
|
goto out_dma_free;
|
|
} else if (ret < 0) {
|
|
goto out_dma_free;
|
|
}
|
|
|
|
if (bcm4377->bootstage != 2) {
|
|
dev_err(&bcm4377->pdev->dev, "boostage %d != 2\n",
|
|
bcm4377->bootstage);
|
|
ret = -ENXIO;
|
|
goto out_dma_free;
|
|
}
|
|
|
|
dev_dbg(&bcm4377->pdev->dev, "firmware has booted (stage = %x)\n",
|
|
bcm4377->bootstage);
|
|
ret = 0;
|
|
|
|
out_dma_free:
|
|
dma_free_coherent(&bcm4377->pdev->dev, fw->size, bfr, fw_dma);
|
|
out_release_fw:
|
|
release_firmware(fw);
|
|
return ret;
|
|
}
|
|
|
|
static int bcm4377_setup_rti(struct bcm4377_data *bcm4377)
|
|
{
|
|
int ret;
|
|
|
|
dev_dbg(&bcm4377->pdev->dev, "starting RTI\n");
|
|
iowrite32(1, bcm4377->bar0 + BCM4377_BAR0_RTI_CONTROL);
|
|
|
|
ret = wait_for_completion_interruptible_timeout(&bcm4377->event,
|
|
BCM4377_TIMEOUT);
|
|
if (ret == 0) {
|
|
dev_err(&bcm4377->pdev->dev,
|
|
"timed out while waiting for RTI to transition to state 1");
|
|
return -ETIMEDOUT;
|
|
} else if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
if (bcm4377->rti_status != 1) {
|
|
dev_err(&bcm4377->pdev->dev, "RTI did not ack state 1 (%d)\n",
|
|
bcm4377->rti_status);
|
|
return -ENODEV;
|
|
}
|
|
dev_dbg(&bcm4377->pdev->dev, "RTI is in state 1\n");
|
|
|
|
/* allow access to the entire IOVA space again */
|
|
iowrite32(0, bcm4377->bar2 + BCM4377_BAR2_RTI_WINDOW_LO);
|
|
iowrite32(0, bcm4377->bar2 + BCM4377_BAR2_RTI_WINDOW_HI);
|
|
iowrite32(BCM4377_DMA_MASK,
|
|
bcm4377->bar2 + BCM4377_BAR2_RTI_WINDOW_SIZE);
|
|
|
|
/* setup "Converged IPC" context */
|
|
iowrite32(lower_32_bits(bcm4377->ctx_dma),
|
|
bcm4377->bar2 + BCM4377_BAR2_CONTEXT_ADDR_LO);
|
|
iowrite32(upper_32_bits(bcm4377->ctx_dma),
|
|
bcm4377->bar2 + BCM4377_BAR2_CONTEXT_ADDR_HI);
|
|
iowrite32(2, bcm4377->bar0 + BCM4377_BAR0_RTI_CONTROL);
|
|
|
|
ret = wait_for_completion_interruptible_timeout(&bcm4377->event,
|
|
BCM4377_TIMEOUT);
|
|
if (ret == 0) {
|
|
dev_err(&bcm4377->pdev->dev,
|
|
"timed out while waiting for RTI to transition to state 2");
|
|
return -ETIMEDOUT;
|
|
} else if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
if (bcm4377->rti_status != 2) {
|
|
dev_err(&bcm4377->pdev->dev, "RTI did not ack state 2 (%d)\n",
|
|
bcm4377->rti_status);
|
|
return -ENODEV;
|
|
}
|
|
|
|
dev_dbg(&bcm4377->pdev->dev,
|
|
"RTI is in state 2; control ring is ready\n");
|
|
bcm4377->control_ack_ring.enabled = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm4377_parse_otp_board_params(struct bcm4377_data *bcm4377,
|
|
char tag, const char *val, size_t len)
|
|
{
|
|
if (tag != 'V')
|
|
return 0;
|
|
if (len >= sizeof(bcm4377->vendor))
|
|
return -EINVAL;
|
|
|
|
strscpy(bcm4377->vendor, val, len + 1);
|
|
return 0;
|
|
}
|
|
|
|
static int bcm4377_parse_otp_chip_params(struct bcm4377_data *bcm4377, char tag,
|
|
const char *val, size_t len)
|
|
{
|
|
size_t idx = 0;
|
|
|
|
if (tag != 's')
|
|
return 0;
|
|
if (len >= sizeof(bcm4377->stepping))
|
|
return -EINVAL;
|
|
|
|
while (len != 0) {
|
|
bcm4377->stepping[idx] = tolower(val[idx]);
|
|
if (val[idx] == '\0')
|
|
return 0;
|
|
|
|
idx++;
|
|
len--;
|
|
}
|
|
|
|
bcm4377->stepping[idx] = '\0';
|
|
return 0;
|
|
}
|
|
|
|
static int bcm4377_parse_otp_str(struct bcm4377_data *bcm4377, const u8 *str,
|
|
enum bcm4377_otp_params_type type)
|
|
{
|
|
const char *p;
|
|
int ret;
|
|
|
|
p = skip_spaces(str);
|
|
while (*p) {
|
|
char tag = *p++;
|
|
const char *end;
|
|
size_t len;
|
|
|
|
if (*p++ != '=') /* implicit NUL check */
|
|
return -EINVAL;
|
|
|
|
/* *p might be NUL here, if so end == p and len == 0 */
|
|
end = strchrnul(p, ' ');
|
|
len = end - p;
|
|
|
|
/* leave 1 byte for NUL in destination string */
|
|
if (len > (BCM4377_OTP_MAX_PARAM_LEN - 1))
|
|
return -EINVAL;
|
|
|
|
switch (type) {
|
|
case BCM4377_OTP_BOARD_PARAMS:
|
|
ret = bcm4377_parse_otp_board_params(bcm4377, tag, p,
|
|
len);
|
|
break;
|
|
case BCM4377_OTP_CHIP_PARAMS:
|
|
ret = bcm4377_parse_otp_chip_params(bcm4377, tag, p,
|
|
len);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Skip to next arg, if any */
|
|
p = skip_spaces(end);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm4377_parse_otp_sys_vendor(struct bcm4377_data *bcm4377, u8 *otp,
|
|
size_t size)
|
|
{
|
|
int idx = 4;
|
|
const char *chip_params;
|
|
const char *board_params;
|
|
int ret;
|
|
|
|
/* 4-byte header and two empty strings */
|
|
if (size < 6)
|
|
return -EINVAL;
|
|
|
|
if (get_unaligned_le32(otp) != BCM4377_OTP_VENDOR_HDR)
|
|
return -EINVAL;
|
|
|
|
chip_params = &otp[idx];
|
|
|
|
/* Skip first string, including terminator */
|
|
idx += strnlen(chip_params, size - idx) + 1;
|
|
if (idx >= size)
|
|
return -EINVAL;
|
|
|
|
board_params = &otp[idx];
|
|
|
|
/* Skip to terminator of second string */
|
|
idx += strnlen(board_params, size - idx);
|
|
if (idx >= size)
|
|
return -EINVAL;
|
|
|
|
/* At this point both strings are guaranteed NUL-terminated */
|
|
dev_dbg(&bcm4377->pdev->dev,
|
|
"OTP: chip_params='%s' board_params='%s'\n", chip_params,
|
|
board_params);
|
|
|
|
ret = bcm4377_parse_otp_str(bcm4377, chip_params,
|
|
BCM4377_OTP_CHIP_PARAMS);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = bcm4377_parse_otp_str(bcm4377, board_params,
|
|
BCM4377_OTP_BOARD_PARAMS);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!bcm4377->stepping[0] || !bcm4377->vendor[0])
|
|
return -EINVAL;
|
|
|
|
dev_dbg(&bcm4377->pdev->dev, "OTP: stepping=%s, vendor=%s\n",
|
|
bcm4377->stepping, bcm4377->vendor);
|
|
return 0;
|
|
}
|
|
|
|
static int bcm4377_parse_otp(struct bcm4377_data *bcm4377)
|
|
{
|
|
u8 *otp;
|
|
int i;
|
|
int ret = -ENOENT;
|
|
|
|
otp = kzalloc(BCM4377_OTP_SIZE, GFP_KERNEL);
|
|
if (!otp)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < BCM4377_OTP_SIZE; ++i)
|
|
otp[i] = ioread8(bcm4377->bar0 + bcm4377->hw->otp_offset + i);
|
|
|
|
i = 0;
|
|
while (i < (BCM4377_OTP_SIZE - 1)) {
|
|
u8 type = otp[i];
|
|
u8 length = otp[i + 1];
|
|
|
|
if (type == 0)
|
|
break;
|
|
|
|
if ((i + 2 + length) > BCM4377_OTP_SIZE)
|
|
break;
|
|
|
|
switch (type) {
|
|
case BCM4377_OTP_SYS_VENDOR:
|
|
dev_dbg(&bcm4377->pdev->dev,
|
|
"OTP @ 0x%x (%d): SYS_VENDOR", i, length);
|
|
ret = bcm4377_parse_otp_sys_vendor(bcm4377, &otp[i + 2],
|
|
length);
|
|
break;
|
|
case BCM4377_OTP_CIS:
|
|
dev_dbg(&bcm4377->pdev->dev, "OTP @ 0x%x (%d): CIS", i,
|
|
length);
|
|
break;
|
|
default:
|
|
dev_dbg(&bcm4377->pdev->dev, "OTP @ 0x%x (%d): unknown",
|
|
i, length);
|
|
break;
|
|
}
|
|
|
|
i += 2 + length;
|
|
}
|
|
|
|
kfree(otp);
|
|
return ret;
|
|
}
|
|
|
|
static int bcm4377_init_cfg(struct bcm4377_data *bcm4377)
|
|
{
|
|
int ret;
|
|
u32 ctrl;
|
|
|
|
ret = pci_write_config_dword(bcm4377->pdev,
|
|
BCM4377_PCIECFG_BAR0_WINDOW1,
|
|
bcm4377->hw->bar0_window1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = pci_write_config_dword(bcm4377->pdev,
|
|
BCM4377_PCIECFG_BAR0_WINDOW2,
|
|
bcm4377->hw->bar0_window2);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = pci_write_config_dword(
|
|
bcm4377->pdev, BCM4377_PCIECFG_BAR0_CORE2_WINDOW1,
|
|
BCM4377_PCIECFG_BAR0_CORE2_WINDOW1_DEFAULT);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (bcm4377->hw->has_bar0_core2_window2) {
|
|
ret = pci_write_config_dword(bcm4377->pdev,
|
|
BCM4377_PCIECFG_BAR0_CORE2_WINDOW2,
|
|
bcm4377->hw->bar0_core2_window2);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = pci_write_config_dword(bcm4377->pdev, BCM4377_PCIECFG_BAR2_WINDOW,
|
|
BCM4377_PCIECFG_BAR2_WINDOW_DEFAULT);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = pci_read_config_dword(bcm4377->pdev,
|
|
BCM4377_PCIECFG_SUBSYSTEM_CTRL, &ctrl);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (bcm4377->hw->clear_pciecfg_subsystem_ctrl_bit19)
|
|
ctrl &= ~BIT(19);
|
|
ctrl |= BIT(16);
|
|
|
|
return pci_write_config_dword(bcm4377->pdev,
|
|
BCM4377_PCIECFG_SUBSYSTEM_CTRL, ctrl);
|
|
}
|
|
|
|
static int bcm4377_probe_dmi(struct bcm4377_data *bcm4377)
|
|
{
|
|
const struct dmi_system_id *board_type_dmi_id;
|
|
|
|
board_type_dmi_id = dmi_first_match(bcm4377_dmi_board_table);
|
|
if (board_type_dmi_id && board_type_dmi_id->driver_data) {
|
|
bcm4377->board_type = board_type_dmi_id->driver_data;
|
|
dev_dbg(&bcm4377->pdev->dev,
|
|
"found board type via DMI match: %s\n",
|
|
bcm4377->board_type);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm4377_probe_of(struct bcm4377_data *bcm4377)
|
|
{
|
|
struct device_node *np = bcm4377->pdev->dev.of_node;
|
|
int ret;
|
|
|
|
if (!np)
|
|
return 0;
|
|
|
|
ret = of_property_read_string(np, "brcm,board-type",
|
|
&bcm4377->board_type);
|
|
if (ret) {
|
|
dev_err(&bcm4377->pdev->dev, "no brcm,board-type property\n");
|
|
return ret;
|
|
}
|
|
|
|
bcm4377->taurus_beamforming_cal_blob =
|
|
of_get_property(np, "brcm,taurus-bf-cal-blob",
|
|
&bcm4377->taurus_beamforming_cal_size);
|
|
if (!bcm4377->taurus_beamforming_cal_blob) {
|
|
dev_err(&bcm4377->pdev->dev,
|
|
"no brcm,taurus-bf-cal-blob property\n");
|
|
return -ENOENT;
|
|
}
|
|
bcm4377->taurus_cal_blob = of_get_property(np, "brcm,taurus-cal-blob",
|
|
&bcm4377->taurus_cal_size);
|
|
if (!bcm4377->taurus_cal_blob) {
|
|
dev_err(&bcm4377->pdev->dev,
|
|
"no brcm,taurus-cal-blob property\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bcm4377_disable_aspm(struct bcm4377_data *bcm4377)
|
|
{
|
|
pci_disable_link_state(bcm4377->pdev,
|
|
PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1);
|
|
|
|
/*
|
|
* pci_disable_link_state can fail if either CONFIG_PCIEASPM is disabled
|
|
* or if the BIOS hasn't handed over control to us. We must *always*
|
|
* disable ASPM for this device due to hardware errata though.
|
|
*/
|
|
pcie_capability_clear_word(bcm4377->pdev, PCI_EXP_LNKCTL,
|
|
PCI_EXP_LNKCTL_ASPMC);
|
|
}
|
|
|
|
static void bcm4377_pci_free_irq_vectors(void *data)
|
|
{
|
|
pci_free_irq_vectors(data);
|
|
}
|
|
|
|
static void bcm4377_hci_free_dev(void *data)
|
|
{
|
|
hci_free_dev(data);
|
|
}
|
|
|
|
static void bcm4377_hci_unregister_dev(void *data)
|
|
{
|
|
hci_unregister_dev(data);
|
|
}
|
|
|
|
static int bcm4377_probe(struct pci_dev *pdev, const struct pci_device_id *id)
|
|
{
|
|
struct bcm4377_data *bcm4377;
|
|
struct hci_dev *hdev;
|
|
int ret, irq;
|
|
|
|
ret = dma_set_mask_and_coherent(&pdev->dev, BCM4377_DMA_MASK);
|
|
if (ret)
|
|
return ret;
|
|
|
|
bcm4377 = devm_kzalloc(&pdev->dev, sizeof(*bcm4377), GFP_KERNEL);
|
|
if (!bcm4377)
|
|
return -ENOMEM;
|
|
|
|
bcm4377->pdev = pdev;
|
|
bcm4377->hw = &bcm4377_hw_variants[id->driver_data];
|
|
init_completion(&bcm4377->event);
|
|
|
|
ret = bcm4377_prepare_rings(bcm4377);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = bcm4377_init_context(bcm4377);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = bcm4377_probe_dmi(bcm4377);
|
|
if (ret)
|
|
return ret;
|
|
ret = bcm4377_probe_of(bcm4377);
|
|
if (ret)
|
|
return ret;
|
|
if (!bcm4377->board_type) {
|
|
dev_err(&pdev->dev, "unable to determine board type\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (bcm4377->hw->disable_aspm)
|
|
bcm4377_disable_aspm(bcm4377);
|
|
|
|
ret = pci_reset_function_locked(pdev);
|
|
if (ret)
|
|
dev_warn(
|
|
&pdev->dev,
|
|
"function level reset failed with %d; trying to continue anyway\n",
|
|
ret);
|
|
|
|
/*
|
|
* If this number is too low and we try to access any BAR too
|
|
* early the device will crash. Experiments have shown that
|
|
* approximately 50 msec is the minimum amount we have to wait.
|
|
* Let's double that to be safe.
|
|
*/
|
|
msleep(100);
|
|
|
|
ret = pcim_enable_device(pdev);
|
|
if (ret)
|
|
return ret;
|
|
pci_set_master(pdev);
|
|
|
|
ret = bcm4377_init_cfg(bcm4377);
|
|
if (ret)
|
|
return ret;
|
|
|
|
bcm4377->bar0 = pcim_iomap(pdev, 0, 0);
|
|
if (!bcm4377->bar0)
|
|
return -EBUSY;
|
|
bcm4377->bar2 = pcim_iomap(pdev, 2, 0);
|
|
if (!bcm4377->bar2)
|
|
return -EBUSY;
|
|
|
|
ret = bcm4377_parse_otp(bcm4377);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Reading OTP failed with %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Legacy interrupts result in an IRQ storm because we don't know where
|
|
* the interrupt mask and status registers for these chips are.
|
|
* MSIs are acked automatically instead.
|
|
*/
|
|
ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI);
|
|
if (ret < 0)
|
|
return -ENODEV;
|
|
ret = devm_add_action_or_reset(&pdev->dev, bcm4377_pci_free_irq_vectors,
|
|
pdev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
irq = pci_irq_vector(pdev, 0);
|
|
if (irq <= 0)
|
|
return -ENODEV;
|
|
|
|
ret = devm_request_irq(&pdev->dev, irq, bcm4377_irq, 0, "bcm4377",
|
|
bcm4377);
|
|
if (ret)
|
|
return ret;
|
|
|
|
hdev = hci_alloc_dev();
|
|
if (!hdev)
|
|
return -ENOMEM;
|
|
ret = devm_add_action_or_reset(&pdev->dev, bcm4377_hci_free_dev, hdev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
bcm4377->hdev = hdev;
|
|
|
|
hdev->bus = HCI_PCI;
|
|
hdev->open = bcm4377_hci_open;
|
|
hdev->close = bcm4377_hci_close;
|
|
hdev->send = bcm4377_hci_send_frame;
|
|
hdev->set_bdaddr = bcm4377_hci_set_bdaddr;
|
|
hdev->setup = bcm4377_hci_setup;
|
|
|
|
if (bcm4377->hw->broken_mws_transport_config)
|
|
set_bit(HCI_QUIRK_BROKEN_MWS_TRANSPORT_CONFIG, &hdev->quirks);
|
|
if (bcm4377->hw->broken_ext_scan)
|
|
set_bit(HCI_QUIRK_BROKEN_EXT_SCAN, &hdev->quirks);
|
|
if (bcm4377->hw->broken_le_coded)
|
|
set_bit(HCI_QUIRK_BROKEN_LE_CODED, &hdev->quirks);
|
|
|
|
pci_set_drvdata(pdev, bcm4377);
|
|
hci_set_drvdata(hdev, bcm4377);
|
|
SET_HCIDEV_DEV(hdev, &pdev->dev);
|
|
|
|
ret = bcm4377_boot(bcm4377);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = bcm4377_setup_rti(bcm4377);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = hci_register_dev(hdev);
|
|
if (ret)
|
|
return ret;
|
|
return devm_add_action_or_reset(&pdev->dev, bcm4377_hci_unregister_dev,
|
|
hdev);
|
|
}
|
|
|
|
static int bcm4377_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct bcm4377_data *bcm4377 = pci_get_drvdata(pdev);
|
|
int ret;
|
|
|
|
ret = hci_suspend_dev(bcm4377->hdev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
iowrite32(BCM4377_BAR0_SLEEP_CONTROL_QUIESCE,
|
|
bcm4377->bar0 + BCM4377_BAR0_SLEEP_CONTROL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm4377_resume(struct pci_dev *pdev)
|
|
{
|
|
struct bcm4377_data *bcm4377 = pci_get_drvdata(pdev);
|
|
|
|
iowrite32(BCM4377_BAR0_SLEEP_CONTROL_UNQUIESCE,
|
|
bcm4377->bar0 + BCM4377_BAR0_SLEEP_CONTROL);
|
|
|
|
return hci_resume_dev(bcm4377->hdev);
|
|
}
|
|
|
|
static const struct dmi_system_id bcm4377_dmi_board_table[] = {
|
|
{
|
|
.matches = {
|
|
DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir9,1"),
|
|
},
|
|
.driver_data = "apple,formosa",
|
|
},
|
|
{
|
|
.matches = {
|
|
DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro15,4"),
|
|
},
|
|
.driver_data = "apple,formosa",
|
|
},
|
|
{
|
|
.matches = {
|
|
DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro16,3"),
|
|
},
|
|
.driver_data = "apple,formosa",
|
|
},
|
|
{}
|
|
};
|
|
|
|
static const struct bcm4377_hw bcm4377_hw_variants[] = {
|
|
[BCM4377] = {
|
|
.id = 0x4377,
|
|
.otp_offset = 0x4120,
|
|
.bar0_window1 = 0x1800b000,
|
|
.bar0_window2 = 0x1810c000,
|
|
.disable_aspm = true,
|
|
.broken_ext_scan = true,
|
|
.send_ptb = bcm4377_send_ptb,
|
|
},
|
|
|
|
[BCM4378] = {
|
|
.id = 0x4378,
|
|
.otp_offset = 0x4120,
|
|
.bar0_window1 = 0x18002000,
|
|
.bar0_window2 = 0x1810a000,
|
|
.bar0_core2_window2 = 0x18107000,
|
|
.has_bar0_core2_window2 = true,
|
|
.broken_mws_transport_config = true,
|
|
.broken_le_coded = true,
|
|
.send_calibration = bcm4378_send_calibration,
|
|
.send_ptb = bcm4378_send_ptb,
|
|
},
|
|
|
|
[BCM4387] = {
|
|
.id = 0x4387,
|
|
.otp_offset = 0x413c,
|
|
.bar0_window1 = 0x18002000,
|
|
.bar0_window2 = 0x18109000,
|
|
.bar0_core2_window2 = 0x18106000,
|
|
.has_bar0_core2_window2 = true,
|
|
.clear_pciecfg_subsystem_ctrl_bit19 = true,
|
|
.broken_mws_transport_config = true,
|
|
.broken_le_coded = true,
|
|
.send_calibration = bcm4387_send_calibration,
|
|
.send_ptb = bcm4378_send_ptb,
|
|
},
|
|
};
|
|
|
|
#define BCM4377_DEVID_ENTRY(id) \
|
|
{ \
|
|
PCI_VENDOR_ID_BROADCOM, BCM##id##_DEVICE_ID, PCI_ANY_ID, \
|
|
PCI_ANY_ID, PCI_CLASS_NETWORK_OTHER << 8, 0xffff00, \
|
|
BCM##id \
|
|
}
|
|
|
|
static const struct pci_device_id bcm4377_devid_table[] = {
|
|
BCM4377_DEVID_ENTRY(4377),
|
|
BCM4377_DEVID_ENTRY(4378),
|
|
BCM4377_DEVID_ENTRY(4387),
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, bcm4377_devid_table);
|
|
|
|
static struct pci_driver bcm4377_pci_driver = {
|
|
.name = "hci_bcm4377",
|
|
.id_table = bcm4377_devid_table,
|
|
.probe = bcm4377_probe,
|
|
.suspend = bcm4377_suspend,
|
|
.resume = bcm4377_resume,
|
|
};
|
|
module_pci_driver(bcm4377_pci_driver);
|
|
|
|
MODULE_AUTHOR("Sven Peter <sven@svenpeter.dev>");
|
|
MODULE_DESCRIPTION("Bluetooth support for Broadcom 4377/4378/4387 devices");
|
|
MODULE_LICENSE("Dual MIT/GPL");
|
|
MODULE_FIRMWARE("brcm/brcmbt4377*.bin");
|
|
MODULE_FIRMWARE("brcm/brcmbt4377*.ptb");
|
|
MODULE_FIRMWARE("brcm/brcmbt4378*.bin");
|
|
MODULE_FIRMWARE("brcm/brcmbt4378*.ptb");
|
|
MODULE_FIRMWARE("brcm/brcmbt4387*.bin");
|
|
MODULE_FIRMWARE("brcm/brcmbt4387*.ptb");
|