OpenCloudOS-Kernel/sound/soc/codecs/wm2000.c

953 lines
23 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* wm2000.c -- WM2000 ALSA Soc Audio driver
*
* Copyright 2008-2011 Wolfson Microelectronics PLC.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* The download image for the WM2000 will be requested as
* 'wm2000_anc.bin' by default (overridable via platform data) at
* runtime and is expected to be in flat binary format. This is
* generated by Wolfson configuration tools and includes
* system-specific calibration information. If supplied as a
* sequence of ASCII-encoded hexidecimal bytes this can be converted
* into a flat binary with a command such as this on the command line:
*
* perl -e 'while (<>) { s/[\r\n]+// ; printf("%c", hex($_)); }'
* < file > wm2000_anc.bin
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/firmware.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/regmap.h>
#include <linux/debugfs.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/initval.h>
#include <sound/tlv.h>
#include <sound/wm2000.h>
#include "wm2000.h"
#define WM2000_NUM_SUPPLIES 3
static const char *wm2000_supplies[WM2000_NUM_SUPPLIES] = {
"SPKVDD",
"DBVDD",
"DCVDD",
};
enum wm2000_anc_mode {
ANC_ACTIVE = 0,
ANC_BYPASS = 1,
ANC_STANDBY = 2,
ANC_OFF = 3,
};
struct wm2000_priv {
struct i2c_client *i2c;
struct regmap *regmap;
struct clk *mclk;
struct regulator_bulk_data supplies[WM2000_NUM_SUPPLIES];
enum wm2000_anc_mode anc_mode;
unsigned int anc_active:1;
unsigned int anc_eng_ena:1;
unsigned int spk_ena:1;
unsigned int speech_clarity:1;
int anc_download_size;
char *anc_download;
struct mutex lock;
};
static int wm2000_write(struct i2c_client *i2c, unsigned int reg,
unsigned int value)
{
struct wm2000_priv *wm2000 = i2c_get_clientdata(i2c);
return regmap_write(wm2000->regmap, reg, value);
}
static void wm2000_reset(struct wm2000_priv *wm2000)
{
struct i2c_client *i2c = wm2000->i2c;
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_ENG_CLR);
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_RAM_CLR);
wm2000_write(i2c, WM2000_REG_ID1, 0);
wm2000->anc_mode = ANC_OFF;
}
static int wm2000_poll_bit(struct i2c_client *i2c,
unsigned int reg, u8 mask)
{
struct wm2000_priv *wm2000 = i2c_get_clientdata(i2c);
int timeout = 4000;
unsigned int val;
regmap_read(wm2000->regmap, reg, &val);
while (!(val & mask) && --timeout) {
msleep(1);
regmap_read(wm2000->regmap, reg, &val);
}
if (timeout == 0)
return 0;
else
return 1;
}
static int wm2000_power_up(struct i2c_client *i2c, int analogue)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
unsigned long rate;
unsigned int val;
int ret;
if (WARN_ON(wm2000->anc_mode != ANC_OFF))
return -EINVAL;
dev_dbg(&i2c->dev, "Beginning power up\n");
ret = regulator_bulk_enable(WM2000_NUM_SUPPLIES, wm2000->supplies);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret);
return ret;
}
rate = clk_get_rate(wm2000->mclk);
if (rate <= 13500000) {
dev_dbg(&i2c->dev, "Disabling MCLK divider\n");
wm2000_write(i2c, WM2000_REG_SYS_CTL2,
WM2000_MCLK_DIV2_ENA_CLR);
} else {
dev_dbg(&i2c->dev, "Enabling MCLK divider\n");
wm2000_write(i2c, WM2000_REG_SYS_CTL2,
WM2000_MCLK_DIV2_ENA_SET);
}
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_ENG_CLR);
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_ENG_SET);
/* Wait for ANC engine to become ready */
if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT,
WM2000_ANC_ENG_IDLE)) {
dev_err(&i2c->dev, "ANC engine failed to reset\n");
regulator_bulk_disable(WM2000_NUM_SUPPLIES, wm2000->supplies);
return -ETIMEDOUT;
}
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
WM2000_STATUS_BOOT_COMPLETE)) {
dev_err(&i2c->dev, "ANC engine failed to initialise\n");
regulator_bulk_disable(WM2000_NUM_SUPPLIES, wm2000->supplies);
return -ETIMEDOUT;
}
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_RAM_SET);
/* Open code download of the data since it is the only bulk
* write we do. */
dev_dbg(&i2c->dev, "Downloading %d bytes\n",
wm2000->anc_download_size - 2);
ret = i2c_master_send(i2c, wm2000->anc_download,
wm2000->anc_download_size);
if (ret < 0) {
dev_err(&i2c->dev, "i2c_transfer() failed: %d\n", ret);
regulator_bulk_disable(WM2000_NUM_SUPPLIES, wm2000->supplies);
return ret;
}
if (ret != wm2000->anc_download_size) {
dev_err(&i2c->dev, "i2c_transfer() failed, %d != %d\n",
ret, wm2000->anc_download_size);
regulator_bulk_disable(WM2000_NUM_SUPPLIES, wm2000->supplies);
return -EIO;
}
dev_dbg(&i2c->dev, "Download complete\n");
if (analogue) {
wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, 248 / 4);
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_ANA_SEQ_INCLUDE |
WM2000_MODE_MOUSE_ENABLE |
WM2000_MODE_THERMAL_ENABLE);
} else {
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_MOUSE_ENABLE |
WM2000_MODE_THERMAL_ENABLE);
}
ret = regmap_read(wm2000->regmap, WM2000_REG_SPEECH_CLARITY, &val);
if (ret != 0) {
dev_err(&i2c->dev, "Unable to read Speech Clarity: %d\n", ret);
regulator_bulk_disable(WM2000_NUM_SUPPLIES, wm2000->supplies);
return ret;
}
if (wm2000->speech_clarity)
val |= WM2000_SPEECH_CLARITY;
else
val &= ~WM2000_SPEECH_CLARITY;
wm2000_write(i2c, WM2000_REG_SPEECH_CLARITY, val);
wm2000_write(i2c, WM2000_REG_SYS_START0, 0x33);
wm2000_write(i2c, WM2000_REG_SYS_START1, 0x02);
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR);
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
WM2000_STATUS_MOUSE_ACTIVE)) {
dev_err(&i2c->dev, "Timed out waiting for device\n");
regulator_bulk_disable(WM2000_NUM_SUPPLIES, wm2000->supplies);
return -ETIMEDOUT;
}
dev_dbg(&i2c->dev, "ANC active\n");
if (analogue)
dev_dbg(&i2c->dev, "Analogue active\n");
wm2000->anc_mode = ANC_ACTIVE;
return 0;
}
static int wm2000_power_down(struct i2c_client *i2c, int analogue)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
if (analogue) {
wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, 248 / 4);
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_ANA_SEQ_INCLUDE |
WM2000_MODE_POWER_DOWN);
} else {
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_POWER_DOWN);
}
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
WM2000_STATUS_POWER_DOWN_COMPLETE)) {
dev_err(&i2c->dev, "Timeout waiting for ANC power down\n");
return -ETIMEDOUT;
}
if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT,
WM2000_ANC_ENG_IDLE)) {
dev_err(&i2c->dev, "Timeout waiting for ANC engine idle\n");
return -ETIMEDOUT;
}
regulator_bulk_disable(WM2000_NUM_SUPPLIES, wm2000->supplies);
dev_dbg(&i2c->dev, "powered off\n");
wm2000->anc_mode = ANC_OFF;
return 0;
}
static int wm2000_enter_bypass(struct i2c_client *i2c, int analogue)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
if (WARN_ON(wm2000->anc_mode != ANC_ACTIVE))
return -EINVAL;
if (analogue) {
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_ANA_SEQ_INCLUDE |
WM2000_MODE_THERMAL_ENABLE |
WM2000_MODE_BYPASS_ENTRY);
} else {
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_THERMAL_ENABLE |
WM2000_MODE_BYPASS_ENTRY);
}
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
WM2000_STATUS_ANC_DISABLED)) {
dev_err(&i2c->dev, "Timeout waiting for ANC disable\n");
return -ETIMEDOUT;
}
if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT,
WM2000_ANC_ENG_IDLE)) {
dev_err(&i2c->dev, "Timeout waiting for ANC engine idle\n");
return -ETIMEDOUT;
}
wm2000_write(i2c, WM2000_REG_SYS_CTL1, WM2000_SYS_STBY);
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_RAM_CLR);
wm2000->anc_mode = ANC_BYPASS;
dev_dbg(&i2c->dev, "bypass enabled\n");
return 0;
}
static int wm2000_exit_bypass(struct i2c_client *i2c, int analogue)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
if (WARN_ON(wm2000->anc_mode != ANC_BYPASS))
return -EINVAL;
wm2000_write(i2c, WM2000_REG_SYS_CTL1, 0);
if (analogue) {
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_ANA_SEQ_INCLUDE |
WM2000_MODE_MOUSE_ENABLE |
WM2000_MODE_THERMAL_ENABLE);
} else {
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_MOUSE_ENABLE |
WM2000_MODE_THERMAL_ENABLE);
}
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_RAM_SET);
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR);
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
WM2000_STATUS_MOUSE_ACTIVE)) {
dev_err(&i2c->dev, "Timed out waiting for MOUSE\n");
return -ETIMEDOUT;
}
wm2000->anc_mode = ANC_ACTIVE;
dev_dbg(&i2c->dev, "MOUSE active\n");
return 0;
}
static int wm2000_enter_standby(struct i2c_client *i2c, int analogue)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
if (WARN_ON(wm2000->anc_mode != ANC_ACTIVE))
return -EINVAL;
if (analogue) {
wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, 248 / 4);
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_ANA_SEQ_INCLUDE |
WM2000_MODE_THERMAL_ENABLE |
WM2000_MODE_STANDBY_ENTRY);
} else {
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_THERMAL_ENABLE |
WM2000_MODE_STANDBY_ENTRY);
}
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
WM2000_STATUS_ANC_DISABLED)) {
dev_err(&i2c->dev,
"Timed out waiting for ANC disable after 1ms\n");
return -ETIMEDOUT;
}
if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT, WM2000_ANC_ENG_IDLE)) {
dev_err(&i2c->dev,
"Timed out waiting for standby\n");
return -ETIMEDOUT;
}
wm2000_write(i2c, WM2000_REG_SYS_CTL1, WM2000_SYS_STBY);
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_RAM_CLR);
wm2000->anc_mode = ANC_STANDBY;
dev_dbg(&i2c->dev, "standby\n");
if (analogue)
dev_dbg(&i2c->dev, "Analogue disabled\n");
return 0;
}
static int wm2000_exit_standby(struct i2c_client *i2c, int analogue)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
if (WARN_ON(wm2000->anc_mode != ANC_STANDBY))
return -EINVAL;
wm2000_write(i2c, WM2000_REG_SYS_CTL1, 0);
if (analogue) {
wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, 248 / 4);
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_ANA_SEQ_INCLUDE |
WM2000_MODE_THERMAL_ENABLE |
WM2000_MODE_MOUSE_ENABLE);
} else {
wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
WM2000_MODE_THERMAL_ENABLE |
WM2000_MODE_MOUSE_ENABLE);
}
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_RAM_SET);
wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR);
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
WM2000_STATUS_MOUSE_ACTIVE)) {
dev_err(&i2c->dev, "Timed out waiting for MOUSE\n");
return -ETIMEDOUT;
}
wm2000->anc_mode = ANC_ACTIVE;
dev_dbg(&i2c->dev, "MOUSE active\n");
if (analogue)
dev_dbg(&i2c->dev, "Analogue enabled\n");
return 0;
}
typedef int (*wm2000_mode_fn)(struct i2c_client *i2c, int analogue);
static struct {
enum wm2000_anc_mode source;
enum wm2000_anc_mode dest;
int analogue;
wm2000_mode_fn step[2];
} anc_transitions[] = {
{
.source = ANC_OFF,
.dest = ANC_ACTIVE,
.analogue = 1,
.step = {
wm2000_power_up,
},
},
{
.source = ANC_OFF,
.dest = ANC_STANDBY,
.step = {
wm2000_power_up,
wm2000_enter_standby,
},
},
{
.source = ANC_OFF,
.dest = ANC_BYPASS,
.analogue = 1,
.step = {
wm2000_power_up,
wm2000_enter_bypass,
},
},
{
.source = ANC_ACTIVE,
.dest = ANC_BYPASS,
.analogue = 1,
.step = {
wm2000_enter_bypass,
},
},
{
.source = ANC_ACTIVE,
.dest = ANC_STANDBY,
.analogue = 1,
.step = {
wm2000_enter_standby,
},
},
{
.source = ANC_ACTIVE,
.dest = ANC_OFF,
.analogue = 1,
.step = {
wm2000_power_down,
},
},
{
.source = ANC_BYPASS,
.dest = ANC_ACTIVE,
.analogue = 1,
.step = {
wm2000_exit_bypass,
},
},
{
.source = ANC_BYPASS,
.dest = ANC_STANDBY,
.analogue = 1,
.step = {
wm2000_exit_bypass,
wm2000_enter_standby,
},
},
{
.source = ANC_BYPASS,
.dest = ANC_OFF,
.step = {
wm2000_exit_bypass,
wm2000_power_down,
},
},
{
.source = ANC_STANDBY,
.dest = ANC_ACTIVE,
.analogue = 1,
.step = {
wm2000_exit_standby,
},
},
{
.source = ANC_STANDBY,
.dest = ANC_BYPASS,
.analogue = 1,
.step = {
wm2000_exit_standby,
wm2000_enter_bypass,
},
},
{
.source = ANC_STANDBY,
.dest = ANC_OFF,
.step = {
wm2000_exit_standby,
wm2000_power_down,
},
},
};
static int wm2000_anc_transition(struct wm2000_priv *wm2000,
enum wm2000_anc_mode mode)
{
struct i2c_client *i2c = wm2000->i2c;
int i, j;
int ret = 0;
if (wm2000->anc_mode == mode)
return 0;
for (i = 0; i < ARRAY_SIZE(anc_transitions); i++)
if (anc_transitions[i].source == wm2000->anc_mode &&
anc_transitions[i].dest == mode)
break;
if (i == ARRAY_SIZE(anc_transitions)) {
dev_err(&i2c->dev, "No transition for %d->%d\n",
wm2000->anc_mode, mode);
return -EINVAL;
}
/* Maintain clock while active */
if (anc_transitions[i].source == ANC_OFF) {
ret = clk_prepare_enable(wm2000->mclk);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to enable MCLK: %d\n", ret);
return ret;
}
}
for (j = 0; j < ARRAY_SIZE(anc_transitions[j].step); j++) {
if (!anc_transitions[i].step[j])
break;
ret = anc_transitions[i].step[j](i2c,
anc_transitions[i].analogue);
if (ret != 0)
break;
}
if (anc_transitions[i].dest == ANC_OFF)
clk_disable_unprepare(wm2000->mclk);
return ret;
}
static int wm2000_anc_set_mode(struct wm2000_priv *wm2000)
{
struct i2c_client *i2c = wm2000->i2c;
enum wm2000_anc_mode mode;
if (wm2000->anc_eng_ena && wm2000->spk_ena)
if (wm2000->anc_active)
mode = ANC_ACTIVE;
else
mode = ANC_BYPASS;
else
mode = ANC_STANDBY;
dev_dbg(&i2c->dev, "Set mode %d (enabled %d, mute %d, active %d)\n",
mode, wm2000->anc_eng_ena, !wm2000->spk_ena,
wm2000->anc_active);
return wm2000_anc_transition(wm2000, mode);
}
static int wm2000_anc_mode_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
struct wm2000_priv *wm2000 = dev_get_drvdata(component->dev);
ucontrol->value.integer.value[0] = wm2000->anc_active;
return 0;
}
static int wm2000_anc_mode_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
struct wm2000_priv *wm2000 = dev_get_drvdata(component->dev);
unsigned int anc_active = ucontrol->value.integer.value[0];
int ret;
if (anc_active > 1)
return -EINVAL;
mutex_lock(&wm2000->lock);
wm2000->anc_active = anc_active;
ret = wm2000_anc_set_mode(wm2000);
mutex_unlock(&wm2000->lock);
return ret;
}
static int wm2000_speaker_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
struct wm2000_priv *wm2000 = dev_get_drvdata(component->dev);
ucontrol->value.integer.value[0] = wm2000->spk_ena;
return 0;
}
static int wm2000_speaker_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
struct wm2000_priv *wm2000 = dev_get_drvdata(component->dev);
unsigned int val = ucontrol->value.integer.value[0];
int ret;
if (val > 1)
return -EINVAL;
mutex_lock(&wm2000->lock);
wm2000->spk_ena = val;
ret = wm2000_anc_set_mode(wm2000);
mutex_unlock(&wm2000->lock);
return ret;
}
static const struct snd_kcontrol_new wm2000_controls[] = {
SOC_SINGLE("ANC Volume", WM2000_REG_ANC_GAIN_CTRL, 0, 255, 0),
SOC_SINGLE_BOOL_EXT("WM2000 ANC Switch", 0,
wm2000_anc_mode_get,
wm2000_anc_mode_put),
SOC_SINGLE_BOOL_EXT("WM2000 Switch", 0,
wm2000_speaker_get,
wm2000_speaker_put),
};
static int wm2000_anc_power_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
struct wm2000_priv *wm2000 = dev_get_drvdata(component->dev);
int ret;
mutex_lock(&wm2000->lock);
if (SND_SOC_DAPM_EVENT_ON(event))
wm2000->anc_eng_ena = 1;
if (SND_SOC_DAPM_EVENT_OFF(event))
wm2000->anc_eng_ena = 0;
ret = wm2000_anc_set_mode(wm2000);
mutex_unlock(&wm2000->lock);
return ret;
}
static const struct snd_soc_dapm_widget wm2000_dapm_widgets[] = {
/* Externally visible pins */
SND_SOC_DAPM_OUTPUT("SPKN"),
SND_SOC_DAPM_OUTPUT("SPKP"),
SND_SOC_DAPM_INPUT("LINN"),
SND_SOC_DAPM_INPUT("LINP"),
SND_SOC_DAPM_PGA_E("ANC Engine", SND_SOC_NOPM, 0, 0, NULL, 0,
wm2000_anc_power_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
};
/* Target, Path, Source */
static const struct snd_soc_dapm_route wm2000_audio_map[] = {
{ "SPKN", NULL, "ANC Engine" },
{ "SPKP", NULL, "ANC Engine" },
{ "ANC Engine", NULL, "LINN" },
{ "ANC Engine", NULL, "LINP" },
};
#ifdef CONFIG_PM
static int wm2000_suspend(struct snd_soc_component *component)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(component->dev);
return wm2000_anc_transition(wm2000, ANC_OFF);
}
static int wm2000_resume(struct snd_soc_component *component)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(component->dev);
return wm2000_anc_set_mode(wm2000);
}
#else
#define wm2000_suspend NULL
#define wm2000_resume NULL
#endif
static bool wm2000_readable_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case WM2000_REG_SYS_START:
case WM2000_REG_ANC_GAIN_CTRL:
case WM2000_REG_MSE_TH1:
case WM2000_REG_MSE_TH2:
case WM2000_REG_SPEECH_CLARITY:
case WM2000_REG_SYS_WATCHDOG:
case WM2000_REG_ANA_VMID_PD_TIME:
case WM2000_REG_ANA_VMID_PU_TIME:
case WM2000_REG_CAT_FLTR_INDX:
case WM2000_REG_CAT_GAIN_0:
case WM2000_REG_SYS_STATUS:
case WM2000_REG_SYS_MODE_CNTRL:
case WM2000_REG_SYS_START0:
case WM2000_REG_SYS_START1:
case WM2000_REG_ID1:
case WM2000_REG_ID2:
case WM2000_REG_REVISON:
case WM2000_REG_SYS_CTL1:
case WM2000_REG_SYS_CTL2:
case WM2000_REG_ANC_STAT:
case WM2000_REG_IF_CTL:
case WM2000_REG_ANA_MIC_CTL:
case WM2000_REG_SPK_CTL:
return true;
default:
return false;
}
}
static const struct regmap_config wm2000_regmap = {
.reg_bits = 16,
.val_bits = 8,
.max_register = WM2000_REG_SPK_CTL,
.readable_reg = wm2000_readable_reg,
};
static int wm2000_probe(struct snd_soc_component *component)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(component->dev);
/* This will trigger a transition to standby mode by default */
wm2000_anc_set_mode(wm2000);
return 0;
}
static void wm2000_remove(struct snd_soc_component *component)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(component->dev);
wm2000_anc_transition(wm2000, ANC_OFF);
}
static const struct snd_soc_component_driver soc_component_dev_wm2000 = {
.probe = wm2000_probe,
.remove = wm2000_remove,
.suspend = wm2000_suspend,
.resume = wm2000_resume,
.controls = wm2000_controls,
.num_controls = ARRAY_SIZE(wm2000_controls),
.dapm_widgets = wm2000_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(wm2000_dapm_widgets),
.dapm_routes = wm2000_audio_map,
.num_dapm_routes = ARRAY_SIZE(wm2000_audio_map),
.idle_bias_on = 1,
.use_pmdown_time = 1,
.endianness = 1,
.non_legacy_dai_naming = 1,
};
static int wm2000_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *i2c_id)
{
struct wm2000_priv *wm2000;
struct wm2000_platform_data *pdata;
const char *filename;
const struct firmware *fw = NULL;
int ret, i;
unsigned int reg;
u16 id;
wm2000 = devm_kzalloc(&i2c->dev, sizeof(*wm2000), GFP_KERNEL);
if (!wm2000)
return -ENOMEM;
mutex_init(&wm2000->lock);
dev_set_drvdata(&i2c->dev, wm2000);
wm2000->regmap = devm_regmap_init_i2c(i2c, &wm2000_regmap);
if (IS_ERR(wm2000->regmap)) {
ret = PTR_ERR(wm2000->regmap);
dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
ret);
goto out;
}
for (i = 0; i < WM2000_NUM_SUPPLIES; i++)
wm2000->supplies[i].supply = wm2000_supplies[i];
ret = devm_regulator_bulk_get(&i2c->dev, WM2000_NUM_SUPPLIES,
wm2000->supplies);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to get supplies: %d\n", ret);
return ret;
}
ret = regulator_bulk_enable(WM2000_NUM_SUPPLIES, wm2000->supplies);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret);
return ret;
}
/* Verify that this is a WM2000 */
ret = regmap_read(wm2000->regmap, WM2000_REG_ID1, &reg);
if (ret != 0) {
dev_err(&i2c->dev, "Unable to read ID1: %d\n", ret);
return ret;
}
id = reg << 8;
ret = regmap_read(wm2000->regmap, WM2000_REG_ID2, &reg);
if (ret != 0) {
dev_err(&i2c->dev, "Unable to read ID2: %d\n", ret);
return ret;
}
id |= reg & 0xff;
if (id != 0x2000) {
dev_err(&i2c->dev, "Device is not a WM2000 - ID %x\n", id);
ret = -ENODEV;
goto err_supplies;
}
ret = regmap_read(wm2000->regmap, WM2000_REG_REVISON, &reg);
if (ret != 0) {
dev_err(&i2c->dev, "Unable to read Revision: %d\n", ret);
return ret;
}
dev_info(&i2c->dev, "revision %c\n", reg + 'A');
wm2000->mclk = devm_clk_get(&i2c->dev, "MCLK");
if (IS_ERR(wm2000->mclk)) {
ret = PTR_ERR(wm2000->mclk);
dev_err(&i2c->dev, "Failed to get MCLK: %d\n", ret);
goto err_supplies;
}
filename = "wm2000_anc.bin";
pdata = dev_get_platdata(&i2c->dev);
if (pdata) {
wm2000->speech_clarity = !pdata->speech_enh_disable;
if (pdata->download_file)
filename = pdata->download_file;
}
ret = request_firmware(&fw, filename, &i2c->dev);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to acquire ANC data: %d\n", ret);
goto err_supplies;
}
/* Pre-cook the concatenation of the register address onto the image */
wm2000->anc_download_size = fw->size + 2;
wm2000->anc_download = devm_kzalloc(&i2c->dev,
wm2000->anc_download_size,
GFP_KERNEL);
if (wm2000->anc_download == NULL) {
ret = -ENOMEM;
goto err_supplies;
}
wm2000->anc_download[0] = 0x80;
wm2000->anc_download[1] = 0x00;
memcpy(wm2000->anc_download + 2, fw->data, fw->size);
wm2000->anc_eng_ena = 1;
wm2000->anc_active = 1;
wm2000->spk_ena = 1;
wm2000->i2c = i2c;
wm2000_reset(wm2000);
ret = devm_snd_soc_register_component(&i2c->dev,
&soc_component_dev_wm2000, NULL, 0);
err_supplies:
regulator_bulk_disable(WM2000_NUM_SUPPLIES, wm2000->supplies);
out:
release_firmware(fw);
return ret;
}
static const struct i2c_device_id wm2000_i2c_id[] = {
{ "wm2000", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, wm2000_i2c_id);
static struct i2c_driver wm2000_i2c_driver = {
.driver = {
.name = "wm2000",
},
.probe = wm2000_i2c_probe,
.id_table = wm2000_i2c_id,
};
module_i2c_driver(wm2000_i2c_driver);
MODULE_DESCRIPTION("ASoC WM2000 driver");
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfonmicro.com>");
MODULE_LICENSE("GPL");