498 lines
13 KiB
C
498 lines
13 KiB
C
/*
|
|
* linux/drivers/video/68328fb.c -- Low level implementation of the
|
|
* mc68x328 LCD frame buffer device
|
|
*
|
|
* Copyright (C) 2003 Georges Menie
|
|
*
|
|
* This driver assumes an already configured controller (e.g. from config.c)
|
|
* Keep the code clean of board specific initialization.
|
|
*
|
|
* This code has not been tested with colors, colormap management functions
|
|
* are minimal (no colormap data written to the 68328 registers...)
|
|
*
|
|
* initial version of this driver:
|
|
* Copyright (C) 1998,1999 Kenneth Albanowski <kjahds@kjahds.com>,
|
|
* The Silver Hammer Group, Ltd.
|
|
*
|
|
* this version is based on :
|
|
*
|
|
* linux/drivers/video/vfb.c -- Virtual frame buffer device
|
|
*
|
|
* Copyright (C) 2002 James Simmons
|
|
*
|
|
* Copyright (C) 1997 Geert Uytterhoeven
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file COPYING in the main directory of this archive for
|
|
* more details.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/string.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/init.h>
|
|
|
|
#if defined(CONFIG_M68VZ328)
|
|
#include <asm/MC68VZ328.h>
|
|
#elif defined(CONFIG_M68EZ328)
|
|
#include <asm/MC68EZ328.h>
|
|
#elif defined(CONFIG_M68328)
|
|
#include <asm/MC68328.h>
|
|
#else
|
|
#error wrong architecture for the MC68x328 frame buffer device
|
|
#endif
|
|
|
|
static u_long videomemory;
|
|
static u_long videomemorysize;
|
|
|
|
static struct fb_info fb_info;
|
|
static u32 mc68x328fb_pseudo_palette[16];
|
|
|
|
static struct fb_var_screeninfo mc68x328fb_default __initdata = {
|
|
.red = { 0, 8, 0 },
|
|
.green = { 0, 8, 0 },
|
|
.blue = { 0, 8, 0 },
|
|
.activate = FB_ACTIVATE_TEST,
|
|
.height = -1,
|
|
.width = -1,
|
|
.pixclock = 20000,
|
|
.left_margin = 64,
|
|
.right_margin = 64,
|
|
.upper_margin = 32,
|
|
.lower_margin = 32,
|
|
.hsync_len = 64,
|
|
.vsync_len = 2,
|
|
.vmode = FB_VMODE_NONINTERLACED,
|
|
};
|
|
|
|
static const struct fb_fix_screeninfo mc68x328fb_fix __initconst = {
|
|
.id = "68328fb",
|
|
.type = FB_TYPE_PACKED_PIXELS,
|
|
.xpanstep = 1,
|
|
.ypanstep = 1,
|
|
.ywrapstep = 1,
|
|
.accel = FB_ACCEL_NONE,
|
|
};
|
|
|
|
/*
|
|
* Interface used by the world
|
|
*/
|
|
int mc68x328fb_init(void);
|
|
int mc68x328fb_setup(char *);
|
|
|
|
static int mc68x328fb_check_var(struct fb_var_screeninfo *var,
|
|
struct fb_info *info);
|
|
static int mc68x328fb_set_par(struct fb_info *info);
|
|
static int mc68x328fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
|
|
u_int transp, struct fb_info *info);
|
|
static int mc68x328fb_pan_display(struct fb_var_screeninfo *var,
|
|
struct fb_info *info);
|
|
static int mc68x328fb_mmap(struct fb_info *info, struct vm_area_struct *vma);
|
|
|
|
static struct fb_ops mc68x328fb_ops = {
|
|
.fb_check_var = mc68x328fb_check_var,
|
|
.fb_set_par = mc68x328fb_set_par,
|
|
.fb_setcolreg = mc68x328fb_setcolreg,
|
|
.fb_pan_display = mc68x328fb_pan_display,
|
|
.fb_fillrect = cfb_fillrect,
|
|
.fb_copyarea = cfb_copyarea,
|
|
.fb_imageblit = cfb_imageblit,
|
|
.fb_mmap = mc68x328fb_mmap,
|
|
};
|
|
|
|
/*
|
|
* Internal routines
|
|
*/
|
|
|
|
static u_long get_line_length(int xres_virtual, int bpp)
|
|
{
|
|
u_long length;
|
|
|
|
length = xres_virtual * bpp;
|
|
length = (length + 31) & ~31;
|
|
length >>= 3;
|
|
return (length);
|
|
}
|
|
|
|
/*
|
|
* Setting the video mode has been split into two parts.
|
|
* First part, xxxfb_check_var, must not write anything
|
|
* to hardware, it should only verify and adjust var.
|
|
* This means it doesn't alter par but it does use hardware
|
|
* data from it to check this var.
|
|
*/
|
|
|
|
static int mc68x328fb_check_var(struct fb_var_screeninfo *var,
|
|
struct fb_info *info)
|
|
{
|
|
u_long line_length;
|
|
|
|
/*
|
|
* FB_VMODE_CONUPDATE and FB_VMODE_SMOOTH_XPAN are equal!
|
|
* as FB_VMODE_SMOOTH_XPAN is only used internally
|
|
*/
|
|
|
|
if (var->vmode & FB_VMODE_CONUPDATE) {
|
|
var->vmode |= FB_VMODE_YWRAP;
|
|
var->xoffset = info->var.xoffset;
|
|
var->yoffset = info->var.yoffset;
|
|
}
|
|
|
|
/*
|
|
* Some very basic checks
|
|
*/
|
|
if (!var->xres)
|
|
var->xres = 1;
|
|
if (!var->yres)
|
|
var->yres = 1;
|
|
if (var->xres > var->xres_virtual)
|
|
var->xres_virtual = var->xres;
|
|
if (var->yres > var->yres_virtual)
|
|
var->yres_virtual = var->yres;
|
|
if (var->bits_per_pixel <= 1)
|
|
var->bits_per_pixel = 1;
|
|
else if (var->bits_per_pixel <= 8)
|
|
var->bits_per_pixel = 8;
|
|
else if (var->bits_per_pixel <= 16)
|
|
var->bits_per_pixel = 16;
|
|
else if (var->bits_per_pixel <= 24)
|
|
var->bits_per_pixel = 24;
|
|
else if (var->bits_per_pixel <= 32)
|
|
var->bits_per_pixel = 32;
|
|
else
|
|
return -EINVAL;
|
|
|
|
if (var->xres_virtual < var->xoffset + var->xres)
|
|
var->xres_virtual = var->xoffset + var->xres;
|
|
if (var->yres_virtual < var->yoffset + var->yres)
|
|
var->yres_virtual = var->yoffset + var->yres;
|
|
|
|
/*
|
|
* Memory limit
|
|
*/
|
|
line_length =
|
|
get_line_length(var->xres_virtual, var->bits_per_pixel);
|
|
if (line_length * var->yres_virtual > videomemorysize)
|
|
return -ENOMEM;
|
|
|
|
/*
|
|
* Now that we checked it we alter var. The reason being is that the video
|
|
* mode passed in might not work but slight changes to it might make it
|
|
* work. This way we let the user know what is acceptable.
|
|
*/
|
|
switch (var->bits_per_pixel) {
|
|
case 1:
|
|
var->red.offset = 0;
|
|
var->red.length = 1;
|
|
var->green.offset = 0;
|
|
var->green.length = 1;
|
|
var->blue.offset = 0;
|
|
var->blue.length = 1;
|
|
var->transp.offset = 0;
|
|
var->transp.length = 0;
|
|
break;
|
|
case 8:
|
|
var->red.offset = 0;
|
|
var->red.length = 8;
|
|
var->green.offset = 0;
|
|
var->green.length = 8;
|
|
var->blue.offset = 0;
|
|
var->blue.length = 8;
|
|
var->transp.offset = 0;
|
|
var->transp.length = 0;
|
|
break;
|
|
case 16: /* RGBA 5551 */
|
|
if (var->transp.length) {
|
|
var->red.offset = 0;
|
|
var->red.length = 5;
|
|
var->green.offset = 5;
|
|
var->green.length = 5;
|
|
var->blue.offset = 10;
|
|
var->blue.length = 5;
|
|
var->transp.offset = 15;
|
|
var->transp.length = 1;
|
|
} else { /* RGB 565 */
|
|
var->red.offset = 0;
|
|
var->red.length = 5;
|
|
var->green.offset = 5;
|
|
var->green.length = 6;
|
|
var->blue.offset = 11;
|
|
var->blue.length = 5;
|
|
var->transp.offset = 0;
|
|
var->transp.length = 0;
|
|
}
|
|
break;
|
|
case 24: /* RGB 888 */
|
|
var->red.offset = 0;
|
|
var->red.length = 8;
|
|
var->green.offset = 8;
|
|
var->green.length = 8;
|
|
var->blue.offset = 16;
|
|
var->blue.length = 8;
|
|
var->transp.offset = 0;
|
|
var->transp.length = 0;
|
|
break;
|
|
case 32: /* RGBA 8888 */
|
|
var->red.offset = 0;
|
|
var->red.length = 8;
|
|
var->green.offset = 8;
|
|
var->green.length = 8;
|
|
var->blue.offset = 16;
|
|
var->blue.length = 8;
|
|
var->transp.offset = 24;
|
|
var->transp.length = 8;
|
|
break;
|
|
}
|
|
var->red.msb_right = 0;
|
|
var->green.msb_right = 0;
|
|
var->blue.msb_right = 0;
|
|
var->transp.msb_right = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This routine actually sets the video mode. It's in here where we
|
|
* the hardware state info->par and fix which can be affected by the
|
|
* change in par. For this driver it doesn't do much.
|
|
*/
|
|
static int mc68x328fb_set_par(struct fb_info *info)
|
|
{
|
|
info->fix.line_length = get_line_length(info->var.xres_virtual,
|
|
info->var.bits_per_pixel);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set a single color register. The values supplied are already
|
|
* rounded down to the hardware's capabilities (according to the
|
|
* entries in the var structure). Return != 0 for invalid regno.
|
|
*/
|
|
|
|
static int mc68x328fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
|
|
u_int transp, struct fb_info *info)
|
|
{
|
|
if (regno >= 256) /* no. of hw registers */
|
|
return 1;
|
|
/*
|
|
* Program hardware... do anything you want with transp
|
|
*/
|
|
|
|
/* grayscale works only partially under directcolor */
|
|
if (info->var.grayscale) {
|
|
/* grayscale = 0.30*R + 0.59*G + 0.11*B */
|
|
red = green = blue =
|
|
(red * 77 + green * 151 + blue * 28) >> 8;
|
|
}
|
|
|
|
/* Directcolor:
|
|
* var->{color}.offset contains start of bitfield
|
|
* var->{color}.length contains length of bitfield
|
|
* {hardwarespecific} contains width of RAMDAC
|
|
* cmap[X] is programmed to (X << red.offset) | (X << green.offset) | (X << blue.offset)
|
|
* RAMDAC[X] is programmed to (red, green, blue)
|
|
*
|
|
* Pseudocolor:
|
|
* uses offset = 0 && length = RAMDAC register width.
|
|
* var->{color}.offset is 0
|
|
* var->{color}.length contains width of DAC
|
|
* cmap is not used
|
|
* RAMDAC[X] is programmed to (red, green, blue)
|
|
* Truecolor:
|
|
* does not use DAC. Usually 3 are present.
|
|
* var->{color}.offset contains start of bitfield
|
|
* var->{color}.length contains length of bitfield
|
|
* cmap is programmed to (red << red.offset) | (green << green.offset) |
|
|
* (blue << blue.offset) | (transp << transp.offset)
|
|
* RAMDAC does not exist
|
|
*/
|
|
#define CNVT_TOHW(val,width) ((((val)<<(width))+0x7FFF-(val))>>16)
|
|
switch (info->fix.visual) {
|
|
case FB_VISUAL_TRUECOLOR:
|
|
case FB_VISUAL_PSEUDOCOLOR:
|
|
red = CNVT_TOHW(red, info->var.red.length);
|
|
green = CNVT_TOHW(green, info->var.green.length);
|
|
blue = CNVT_TOHW(blue, info->var.blue.length);
|
|
transp = CNVT_TOHW(transp, info->var.transp.length);
|
|
break;
|
|
case FB_VISUAL_DIRECTCOLOR:
|
|
red = CNVT_TOHW(red, 8); /* expect 8 bit DAC */
|
|
green = CNVT_TOHW(green, 8);
|
|
blue = CNVT_TOHW(blue, 8);
|
|
/* hey, there is bug in transp handling... */
|
|
transp = CNVT_TOHW(transp, 8);
|
|
break;
|
|
}
|
|
#undef CNVT_TOHW
|
|
/* Truecolor has hardware independent palette */
|
|
if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
|
|
u32 v;
|
|
|
|
if (regno >= 16)
|
|
return 1;
|
|
|
|
v = (red << info->var.red.offset) |
|
|
(green << info->var.green.offset) |
|
|
(blue << info->var.blue.offset) |
|
|
(transp << info->var.transp.offset);
|
|
switch (info->var.bits_per_pixel) {
|
|
case 8:
|
|
break;
|
|
case 16:
|
|
((u32 *) (info->pseudo_palette))[regno] = v;
|
|
break;
|
|
case 24:
|
|
case 32:
|
|
((u32 *) (info->pseudo_palette))[regno] = v;
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Pan or Wrap the Display
|
|
*
|
|
* This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag
|
|
*/
|
|
|
|
static int mc68x328fb_pan_display(struct fb_var_screeninfo *var,
|
|
struct fb_info *info)
|
|
{
|
|
if (var->vmode & FB_VMODE_YWRAP) {
|
|
if (var->yoffset < 0
|
|
|| var->yoffset >= info->var.yres_virtual
|
|
|| var->xoffset)
|
|
return -EINVAL;
|
|
} else {
|
|
if (var->xoffset + info->var.xres > info->var.xres_virtual ||
|
|
var->yoffset + info->var.yres > info->var.yres_virtual)
|
|
return -EINVAL;
|
|
}
|
|
info->var.xoffset = var->xoffset;
|
|
info->var.yoffset = var->yoffset;
|
|
if (var->vmode & FB_VMODE_YWRAP)
|
|
info->var.vmode |= FB_VMODE_YWRAP;
|
|
else
|
|
info->var.vmode &= ~FB_VMODE_YWRAP;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Most drivers don't need their own mmap function
|
|
*/
|
|
|
|
static int mc68x328fb_mmap(struct fb_info *info, struct vm_area_struct *vma)
|
|
{
|
|
#ifndef MMU
|
|
/* this is uClinux (no MMU) specific code */
|
|
|
|
vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP;
|
|
vma->vm_start = videomemory;
|
|
|
|
return 0;
|
|
#else
|
|
return -EINVAL;
|
|
#endif
|
|
}
|
|
|
|
int __init mc68x328fb_setup(char *options)
|
|
{
|
|
#if 0
|
|
char *this_opt;
|
|
#endif
|
|
|
|
if (!options || !*options)
|
|
return 1;
|
|
#if 0
|
|
while ((this_opt = strsep(&options, ",")) != NULL) {
|
|
if (!*this_opt)
|
|
continue;
|
|
if (!strncmp(this_opt, "disable", 7))
|
|
mc68x328fb_enable = 0;
|
|
}
|
|
#endif
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Initialisation
|
|
*/
|
|
|
|
int __init mc68x328fb_init(void)
|
|
{
|
|
#ifndef MODULE
|
|
char *option = NULL;
|
|
|
|
if (fb_get_options("68328fb", &option))
|
|
return -ENODEV;
|
|
mc68x328fb_setup(option);
|
|
#endif
|
|
/*
|
|
* initialize the default mode from the LCD controller registers
|
|
*/
|
|
mc68x328fb_default.xres = LXMAX;
|
|
mc68x328fb_default.yres = LYMAX+1;
|
|
mc68x328fb_default.xres_virtual = mc68x328fb_default.xres;
|
|
mc68x328fb_default.yres_virtual = mc68x328fb_default.yres;
|
|
mc68x328fb_default.bits_per_pixel = 1 + (LPICF & 0x01);
|
|
videomemory = LSSA;
|
|
videomemorysize = (mc68x328fb_default.xres_virtual+7) / 8 *
|
|
mc68x328fb_default.yres_virtual * mc68x328fb_default.bits_per_pixel;
|
|
|
|
fb_info.screen_base = (void *)videomemory;
|
|
fb_info.fbops = &mc68x328fb_ops;
|
|
fb_info.var = mc68x328fb_default;
|
|
fb_info.fix = mc68x328fb_fix;
|
|
fb_info.fix.smem_start = videomemory;
|
|
fb_info.fix.smem_len = videomemorysize;
|
|
fb_info.fix.line_length =
|
|
get_line_length(mc68x328fb_default.xres_virtual, mc68x328fb_default.bits_per_pixel);
|
|
fb_info.fix.visual = (mc68x328fb_default.bits_per_pixel) == 1 ?
|
|
FB_VISUAL_MONO10 : FB_VISUAL_PSEUDOCOLOR;
|
|
if (fb_info.var.bits_per_pixel == 1) {
|
|
fb_info.var.red.length = fb_info.var.green.length = fb_info.var.blue.length = 1;
|
|
fb_info.var.red.offset = fb_info.var.green.offset = fb_info.var.blue.offset = 0;
|
|
}
|
|
fb_info.pseudo_palette = &mc68x328fb_pseudo_palette;
|
|
fb_info.flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
|
|
|
|
if (fb_alloc_cmap(&fb_info.cmap, 256, 0))
|
|
return -ENOMEM;
|
|
|
|
if (register_framebuffer(&fb_info) < 0) {
|
|
fb_dealloc_cmap(&fb_info.cmap);
|
|
return -EINVAL;
|
|
}
|
|
|
|
fb_info(&fb_info, "%s frame buffer device\n", fb_info.fix.id);
|
|
fb_info(&fb_info, "%dx%dx%d at 0x%08lx\n",
|
|
mc68x328fb_default.xres_virtual,
|
|
mc68x328fb_default.yres_virtual,
|
|
1 << mc68x328fb_default.bits_per_pixel, videomemory);
|
|
|
|
return 0;
|
|
}
|
|
|
|
module_init(mc68x328fb_init);
|
|
|
|
#ifdef MODULE
|
|
|
|
static void __exit mc68x328fb_cleanup(void)
|
|
{
|
|
unregister_framebuffer(&fb_info);
|
|
fb_dealloc_cmap(&fb_info.cmap);
|
|
}
|
|
|
|
module_exit(mc68x328fb_cleanup);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
#endif /* MODULE */
|