UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/usb/phy/phy-mxs-usb.c

888 lines
24 KiB
C
Raw Permalink Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2012-2014 Freescale Semiconductor, Inc.
* Copyright (C) 2012 Marek Vasut <marex@denx.de>
* on behalf of DENX Software Engineering GmbH
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/usb/otg.h>
#include <linux/stmp_device.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of_device.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
#include <linux/iopoll.h>
#define DRIVER_NAME "mxs_phy"
/* Register Macro */
#define HW_USBPHY_PWD 0x00
#define HW_USBPHY_TX 0x10
#define HW_USBPHY_CTRL 0x30
#define HW_USBPHY_CTRL_SET 0x34
#define HW_USBPHY_CTRL_CLR 0x38
#define HW_USBPHY_DEBUG_SET 0x54
#define HW_USBPHY_DEBUG_CLR 0x58
#define HW_USBPHY_IP 0x90
#define HW_USBPHY_IP_SET 0x94
#define HW_USBPHY_IP_CLR 0x98
#define GM_USBPHY_TX_TXCAL45DP(x) (((x) & 0xf) << 16)
#define GM_USBPHY_TX_TXCAL45DN(x) (((x) & 0xf) << 8)
#define GM_USBPHY_TX_D_CAL(x) (((x) & 0xf) << 0)
/* imx7ulp */
#define HW_USBPHY_PLL_SIC 0xa0
#define HW_USBPHY_PLL_SIC_SET 0xa4
#define HW_USBPHY_PLL_SIC_CLR 0xa8
#define BM_USBPHY_CTRL_SFTRST BIT(31)
#define BM_USBPHY_CTRL_CLKGATE BIT(30)
#define BM_USBPHY_CTRL_OTG_ID_VALUE BIT(27)
#define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS BIT(26)
#define BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE BIT(25)
#define BM_USBPHY_CTRL_ENVBUSCHG_WKUP BIT(23)
#define BM_USBPHY_CTRL_ENIDCHG_WKUP BIT(22)
#define BM_USBPHY_CTRL_ENDPDMCHG_WKUP BIT(21)
#define BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD BIT(20)
#define BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE BIT(19)
#define BM_USBPHY_CTRL_ENAUTO_PWRON_PLL BIT(18)
#define BM_USBPHY_CTRL_ENUTMILEVEL3 BIT(15)
#define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14)
#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1)
#define BM_USBPHY_IP_FIX (BIT(17) | BIT(18))
#define BM_USBPHY_DEBUG_CLKGATE BIT(30)
/* imx7ulp */
#define BM_USBPHY_PLL_LOCK BIT(31)
#define BM_USBPHY_PLL_REG_ENABLE BIT(21)
#define BM_USBPHY_PLL_BYPASS BIT(16)
#define BM_USBPHY_PLL_POWER BIT(12)
#define BM_USBPHY_PLL_EN_USB_CLKS BIT(6)
/* Anatop Registers */
#define ANADIG_ANA_MISC0 0x150
#define ANADIG_ANA_MISC0_SET 0x154
#define ANADIG_ANA_MISC0_CLR 0x158
#define ANADIG_USB1_CHRG_DETECT_SET 0x1b4
#define ANADIG_USB1_CHRG_DETECT_CLR 0x1b8
#define ANADIG_USB2_CHRG_DETECT_SET 0x214
#define ANADIG_USB1_CHRG_DETECT_EN_B BIT(20)
#define ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B BIT(19)
#define ANADIG_USB1_CHRG_DETECT_CHK_CONTACT BIT(18)
#define ANADIG_USB1_VBUS_DET_STAT 0x1c0
#define ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID BIT(3)
#define ANADIG_USB1_CHRG_DET_STAT 0x1d0
#define ANADIG_USB1_CHRG_DET_STAT_DM_STATE BIT(2)
#define ANADIG_USB1_CHRG_DET_STAT_CHRG_DETECTED BIT(1)
#define ANADIG_USB1_CHRG_DET_STAT_PLUG_CONTACT BIT(0)
#define ANADIG_USB2_VBUS_DET_STAT 0x220
#define ANADIG_USB1_LOOPBACK_SET 0x1e4
#define ANADIG_USB1_LOOPBACK_CLR 0x1e8
#define ANADIG_USB1_LOOPBACK_UTMI_TESTSTART BIT(0)
#define ANADIG_USB2_LOOPBACK_SET 0x244
#define ANADIG_USB2_LOOPBACK_CLR 0x248
#define ANADIG_USB1_MISC 0x1f0
#define ANADIG_USB2_MISC 0x250
#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG BIT(12)
#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL BIT(11)
#define BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID BIT(3)
#define BM_ANADIG_USB2_VBUS_DET_STAT_VBUS_VALID BIT(3)
#define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 BIT(2)
#define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN BIT(5)
#define BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1 BIT(2)
#define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN BIT(5)
#define BM_ANADIG_USB1_MISC_RX_VPIN_FS BIT(29)
#define BM_ANADIG_USB1_MISC_RX_VMIN_FS BIT(28)
#define BM_ANADIG_USB2_MISC_RX_VPIN_FS BIT(29)
#define BM_ANADIG_USB2_MISC_RX_VMIN_FS BIT(28)
#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
/* Do disconnection between PHY and controller without vbus */
#define MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS BIT(0)
/*
* The PHY will be in messy if there is a wakeup after putting
* bus to suspend (set portsc.suspendM) but before setting PHY to low
* power mode (set portsc.phcd).
*/
#define MXS_PHY_ABNORMAL_IN_SUSPEND BIT(1)
/*
* The SOF sends too fast after resuming, it will cause disconnection
* between host and high speed device.
*/
#define MXS_PHY_SENDING_SOF_TOO_FAST BIT(2)
/*
* IC has bug fixes logic, they include
* MXS_PHY_ABNORMAL_IN_SUSPEND and MXS_PHY_SENDING_SOF_TOO_FAST
* which are described at above flags, the RTL will handle it
* according to different versions.
*/
#define MXS_PHY_NEED_IP_FIX BIT(3)
/* Minimum and maximum values for device tree entries */
#define MXS_PHY_TX_CAL45_MIN 30
#define MXS_PHY_TX_CAL45_MAX 55
#define MXS_PHY_TX_D_CAL_MIN 79
#define MXS_PHY_TX_D_CAL_MAX 119
struct mxs_phy_data {
unsigned int flags;
};
static const struct mxs_phy_data imx23_phy_data = {
.flags = MXS_PHY_ABNORMAL_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST,
};
static const struct mxs_phy_data imx6q_phy_data = {
.flags = MXS_PHY_SENDING_SOF_TOO_FAST |
MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
MXS_PHY_NEED_IP_FIX,
};
static const struct mxs_phy_data imx6sl_phy_data = {
.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
MXS_PHY_NEED_IP_FIX,
};
static const struct mxs_phy_data vf610_phy_data = {
.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
MXS_PHY_NEED_IP_FIX,
};
static const struct mxs_phy_data imx6sx_phy_data = {
.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
};
static const struct mxs_phy_data imx6ul_phy_data = {
.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
};
static const struct mxs_phy_data imx7ulp_phy_data = {
};
static const struct of_device_id mxs_phy_dt_ids[] = {
{ .compatible = "fsl,imx6sx-usbphy", .data = &imx6sx_phy_data, },
{ .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, },
{ .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, },
{ .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
{ .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, },
{ .compatible = "fsl,imx6ul-usbphy", .data = &imx6ul_phy_data, },
{ .compatible = "fsl,imx7ulp-usbphy", .data = &imx7ulp_phy_data, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
struct mxs_phy {
struct usb_phy phy;
struct clk *clk;
const struct mxs_phy_data *data;
struct regmap *regmap_anatop;
int port_id;
u32 tx_reg_set;
u32 tx_reg_mask;
};
static inline bool is_imx6q_phy(struct mxs_phy *mxs_phy)
{
return mxs_phy->data == &imx6q_phy_data;
}
static inline bool is_imx6sl_phy(struct mxs_phy *mxs_phy)
{
return mxs_phy->data == &imx6sl_phy_data;
}
static inline bool is_imx7ulp_phy(struct mxs_phy *mxs_phy)
{
return mxs_phy->data == &imx7ulp_phy_data;
}
/*
* PHY needs some 32K cycles to switch from 32K clock to
* bus (such as AHB/AXI, etc) clock.
*/
static void mxs_phy_clock_switch_delay(void)
{
usleep_range(300, 400);
}
static void mxs_phy_tx_init(struct mxs_phy *mxs_phy)
{
void __iomem *base = mxs_phy->phy.io_priv;
u32 phytx;
/* Update TX register if there is anything to write */
if (mxs_phy->tx_reg_mask) {
phytx = readl(base + HW_USBPHY_TX);
phytx &= ~mxs_phy->tx_reg_mask;
phytx |= mxs_phy->tx_reg_set;
writel(phytx, base + HW_USBPHY_TX);
}
}
static int mxs_phy_pll_enable(void __iomem *base, bool enable)
{
int ret = 0;
if (enable) {
u32 value;
writel(BM_USBPHY_PLL_REG_ENABLE, base + HW_USBPHY_PLL_SIC_SET);
writel(BM_USBPHY_PLL_BYPASS, base + HW_USBPHY_PLL_SIC_CLR);
writel(BM_USBPHY_PLL_POWER, base + HW_USBPHY_PLL_SIC_SET);
ret = readl_poll_timeout(base + HW_USBPHY_PLL_SIC,
value, (value & BM_USBPHY_PLL_LOCK) != 0,
100, 10000);
if (ret)
return ret;
writel(BM_USBPHY_PLL_EN_USB_CLKS, base +
HW_USBPHY_PLL_SIC_SET);
} else {
writel(BM_USBPHY_PLL_EN_USB_CLKS, base +
HW_USBPHY_PLL_SIC_CLR);
writel(BM_USBPHY_PLL_POWER, base + HW_USBPHY_PLL_SIC_CLR);
writel(BM_USBPHY_PLL_BYPASS, base + HW_USBPHY_PLL_SIC_SET);
writel(BM_USBPHY_PLL_REG_ENABLE, base + HW_USBPHY_PLL_SIC_CLR);
}
return ret;
}
static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
{
int ret;
void __iomem *base = mxs_phy->phy.io_priv;
if (is_imx7ulp_phy(mxs_phy)) {
ret = mxs_phy_pll_enable(base, true);
if (ret)
return ret;
}
ret = stmp_reset_block(base + HW_USBPHY_CTRL);
if (ret)
goto disable_pll;
/* Power up the PHY */
writel(0, base + HW_USBPHY_PWD);
/*
* USB PHY Ctrl Setting
* - Auto clock/power on
* - Enable full/low speed support
*/
writel(BM_USBPHY_CTRL_ENAUTOSET_USBCLKS |
BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE |
BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD |
BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE |
BM_USBPHY_CTRL_ENAUTO_PWRON_PLL |
BM_USBPHY_CTRL_ENUTMILEVEL2 |
BM_USBPHY_CTRL_ENUTMILEVEL3,
base + HW_USBPHY_CTRL_SET);
if (mxs_phy->data->flags & MXS_PHY_NEED_IP_FIX)
writel(BM_USBPHY_IP_FIX, base + HW_USBPHY_IP_SET);
if (mxs_phy->regmap_anatop) {
unsigned int reg = mxs_phy->port_id ?
ANADIG_USB1_CHRG_DETECT_SET :
ANADIG_USB2_CHRG_DETECT_SET;
/*
* The external charger detector needs to be disabled,
* or the signal at DP will be poor
*/
regmap_write(mxs_phy->regmap_anatop, reg,
ANADIG_USB1_CHRG_DETECT_EN_B |
ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B);
}
mxs_phy_tx_init(mxs_phy);
return 0;
disable_pll:
if (is_imx7ulp_phy(mxs_phy))
mxs_phy_pll_enable(base, false);
return ret;
}
/* Return true if the vbus is there */
static bool mxs_phy_get_vbus_status(struct mxs_phy *mxs_phy)
{
unsigned int vbus_value = 0;
if (!mxs_phy->regmap_anatop)
return false;
if (mxs_phy->port_id == 0)
regmap_read(mxs_phy->regmap_anatop,
ANADIG_USB1_VBUS_DET_STAT,
&vbus_value);
else if (mxs_phy->port_id == 1)
regmap_read(mxs_phy->regmap_anatop,
ANADIG_USB2_VBUS_DET_STAT,
&vbus_value);
if (vbus_value & BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID)
return true;
else
return false;
}
static void __mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool disconnect)
{
void __iomem *base = mxs_phy->phy.io_priv;
u32 reg;
if (disconnect)
writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
base + HW_USBPHY_DEBUG_CLR);
if (mxs_phy->port_id == 0) {
reg = disconnect ? ANADIG_USB1_LOOPBACK_SET
: ANADIG_USB1_LOOPBACK_CLR;
regmap_write(mxs_phy->regmap_anatop, reg,
BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 |
BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN);
} else if (mxs_phy->port_id == 1) {
reg = disconnect ? ANADIG_USB2_LOOPBACK_SET
: ANADIG_USB2_LOOPBACK_CLR;
regmap_write(mxs_phy->regmap_anatop, reg,
BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1 |
BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN);
}
if (!disconnect)
writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
base + HW_USBPHY_DEBUG_SET);
/* Delay some time, and let Linestate be SE0 for controller */
if (disconnect)
usleep_range(500, 1000);
}
static bool mxs_phy_is_otg_host(struct mxs_phy *mxs_phy)
{
void __iomem *base = mxs_phy->phy.io_priv;
u32 phyctrl = readl(base + HW_USBPHY_CTRL);
if (IS_ENABLED(CONFIG_USB_OTG) &&
!(phyctrl & BM_USBPHY_CTRL_OTG_ID_VALUE))
return true;
return false;
}
static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
{
bool vbus_is_on = false;
/* If the SoCs don't need to disconnect line without vbus, quit */
if (!(mxs_phy->data->flags & MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS))
return;
/* If the SoCs don't have anatop, quit */
if (!mxs_phy->regmap_anatop)
return;
vbus_is_on = mxs_phy_get_vbus_status(mxs_phy);
if (on && !vbus_is_on && !mxs_phy_is_otg_host(mxs_phy))
__mxs_phy_disconnect_line(mxs_phy, true);
else
__mxs_phy_disconnect_line(mxs_phy, false);
}
static int mxs_phy_init(struct usb_phy *phy)
{
int ret;
struct mxs_phy *mxs_phy = to_mxs_phy(phy);
mxs_phy_clock_switch_delay();
ret = clk_prepare_enable(mxs_phy->clk);
if (ret)
return ret;
return mxs_phy_hw_init(mxs_phy);
}
static void mxs_phy_shutdown(struct usb_phy *phy)
{
struct mxs_phy *mxs_phy = to_mxs_phy(phy);
u32 value = BM_USBPHY_CTRL_ENVBUSCHG_WKUP |
BM_USBPHY_CTRL_ENDPDMCHG_WKUP |
BM_USBPHY_CTRL_ENIDCHG_WKUP |
BM_USBPHY_CTRL_ENAUTOSET_USBCLKS |
BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE |
BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD |
BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE |
BM_USBPHY_CTRL_ENAUTO_PWRON_PLL;
writel(value, phy->io_priv + HW_USBPHY_CTRL_CLR);
writel(0xffffffff, phy->io_priv + HW_USBPHY_PWD);
writel(BM_USBPHY_CTRL_CLKGATE,
phy->io_priv + HW_USBPHY_CTRL_SET);
if (is_imx7ulp_phy(mxs_phy))
mxs_phy_pll_enable(phy->io_priv, false);
clk_disable_unprepare(mxs_phy->clk);
}
static bool mxs_phy_is_low_speed_connection(struct mxs_phy *mxs_phy)
{
unsigned int line_state;
/* bit definition is the same for all controllers */
unsigned int dp_bit = BM_ANADIG_USB1_MISC_RX_VPIN_FS,
dm_bit = BM_ANADIG_USB1_MISC_RX_VMIN_FS;
unsigned int reg = ANADIG_USB1_MISC;
/* If the SoCs don't have anatop, quit */
if (!mxs_phy->regmap_anatop)
return false;
if (mxs_phy->port_id == 0)
reg = ANADIG_USB1_MISC;
else if (mxs_phy->port_id == 1)
reg = ANADIG_USB2_MISC;
regmap_read(mxs_phy->regmap_anatop, reg, &line_state);
if ((line_state & (dp_bit | dm_bit)) == dm_bit)
return true;
else
return false;
}
static int mxs_phy_suspend(struct usb_phy *x, int suspend)
{
int ret;
struct mxs_phy *mxs_phy = to_mxs_phy(x);
bool low_speed_connection, vbus_is_on;
low_speed_connection = mxs_phy_is_low_speed_connection(mxs_phy);
vbus_is_on = mxs_phy_get_vbus_status(mxs_phy);
if (suspend) {
/*
* FIXME: Do not power down RXPWD1PT1 bit for low speed
* connect. The low speed connection will have problem at
* very rare cases during usb suspend and resume process.
*/
if (low_speed_connection & vbus_is_on) {
/*
* If value to be set as pwd value is not 0xffffffff,
* several 32Khz cycles are needed.
*/
mxs_phy_clock_switch_delay();
writel(0xffbfffff, x->io_priv + HW_USBPHY_PWD);
} else {
writel(0xffffffff, x->io_priv + HW_USBPHY_PWD);
}
writel(BM_USBPHY_CTRL_CLKGATE,
x->io_priv + HW_USBPHY_CTRL_SET);
clk_disable_unprepare(mxs_phy->clk);
} else {
mxs_phy_clock_switch_delay();
ret = clk_prepare_enable(mxs_phy->clk);
if (ret)
return ret;
writel(BM_USBPHY_CTRL_CLKGATE,
x->io_priv + HW_USBPHY_CTRL_CLR);
writel(0, x->io_priv + HW_USBPHY_PWD);
}
return 0;
}
static int mxs_phy_set_wakeup(struct usb_phy *x, bool enabled)
{
struct mxs_phy *mxs_phy = to_mxs_phy(x);
u32 value = BM_USBPHY_CTRL_ENVBUSCHG_WKUP |
BM_USBPHY_CTRL_ENDPDMCHG_WKUP |
BM_USBPHY_CTRL_ENIDCHG_WKUP;
if (enabled) {
mxs_phy_disconnect_line(mxs_phy, true);
writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_SET);
} else {
writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_CLR);
mxs_phy_disconnect_line(mxs_phy, false);
}
return 0;
}
static int mxs_phy_on_connect(struct usb_phy *phy,
enum usb_device_speed speed)
{
dev_dbg(phy->dev, "%s device has connected\n",
(speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
if (speed == USB_SPEED_HIGH)
writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
phy->io_priv + HW_USBPHY_CTRL_SET);
return 0;
}
static int mxs_phy_on_disconnect(struct usb_phy *phy,
enum usb_device_speed speed)
{
dev_dbg(phy->dev, "%s device has disconnected\n",
(speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
/* Sometimes, the speed is not high speed when the error occurs */
if (readl(phy->io_priv + HW_USBPHY_CTRL) &
BM_USBPHY_CTRL_ENHOSTDISCONDETECT)
writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
phy->io_priv + HW_USBPHY_CTRL_CLR);
return 0;
}
#define MXS_USB_CHARGER_DATA_CONTACT_TIMEOUT 100
static int mxs_charger_data_contact_detect(struct mxs_phy *x)
{
struct regmap *regmap = x->regmap_anatop;
int i, stable_contact_count = 0;
u32 val;
/* Check if vbus is valid */
regmap_read(regmap, ANADIG_USB1_VBUS_DET_STAT, &val);
if (!(val & ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID)) {
dev_err(x->phy.dev, "vbus is not valid\n");
return -EINVAL;
}
/* Enable charger detector */
regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_CLR,
ANADIG_USB1_CHRG_DETECT_EN_B);
/*
* - Do not check whether a charger is connected to the USB port
* - Check whether the USB plug has been in contact with each other
*/
regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_SET,
ANADIG_USB1_CHRG_DETECT_CHK_CONTACT |
ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B);
/* Check if plug is connected */
for (i = 0; i < MXS_USB_CHARGER_DATA_CONTACT_TIMEOUT; i++) {
regmap_read(regmap, ANADIG_USB1_CHRG_DET_STAT, &val);
if (val & ANADIG_USB1_CHRG_DET_STAT_PLUG_CONTACT) {
stable_contact_count++;
if (stable_contact_count > 5)
/* Data pin makes contact */
break;
else
usleep_range(5000, 10000);
} else {
stable_contact_count = 0;
usleep_range(5000, 6000);
}
}
if (i == MXS_USB_CHARGER_DATA_CONTACT_TIMEOUT) {
dev_err(x->phy.dev,
"Data pin can't make good contact.\n");
/* Disable charger detector */
regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_SET,
ANADIG_USB1_CHRG_DETECT_EN_B |
ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B);
return -ENXIO;
}
return 0;
}
static enum usb_charger_type mxs_charger_primary_detection(struct mxs_phy *x)
{
struct regmap *regmap = x->regmap_anatop;
enum usb_charger_type chgr_type = UNKNOWN_TYPE;
u32 val;
/*
* - Do check whether a charger is connected to the USB port
* - Do not Check whether the USB plug has been in contact with
* each other
*/
regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_CLR,
ANADIG_USB1_CHRG_DETECT_CHK_CONTACT |
ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B);
msleep(100);
/* Check if it is a charger */
regmap_read(regmap, ANADIG_USB1_CHRG_DET_STAT, &val);
if (!(val & ANADIG_USB1_CHRG_DET_STAT_CHRG_DETECTED)) {
chgr_type = SDP_TYPE;
dev_dbg(x->phy.dev, "It is a standard downstream port\n");
}
/* Disable charger detector */
regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_SET,
ANADIG_USB1_CHRG_DETECT_EN_B |
ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B);
return chgr_type;
}
/*
* It must be called after DP is pulled up, which is used to
* differentiate DCP and CDP.
*/
static enum usb_charger_type mxs_charger_secondary_detection(struct mxs_phy *x)
{
struct regmap *regmap = x->regmap_anatop;
int val;
msleep(80);
regmap_read(regmap, ANADIG_USB1_CHRG_DET_STAT, &val);
if (val & ANADIG_USB1_CHRG_DET_STAT_DM_STATE) {
dev_dbg(x->phy.dev, "It is a dedicate charging port\n");
return DCP_TYPE;
} else {
dev_dbg(x->phy.dev, "It is a charging downstream port\n");
return CDP_TYPE;
}
}
static enum usb_charger_type mxs_phy_charger_detect(struct usb_phy *phy)
{
struct mxs_phy *mxs_phy = to_mxs_phy(phy);
struct regmap *regmap = mxs_phy->regmap_anatop;
void __iomem *base = phy->io_priv;
enum usb_charger_type chgr_type = UNKNOWN_TYPE;
if (!regmap)
return UNKNOWN_TYPE;
if (mxs_charger_data_contact_detect(mxs_phy))
return chgr_type;
chgr_type = mxs_charger_primary_detection(mxs_phy);
if (chgr_type != SDP_TYPE) {
/* Pull up DP via test */
writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
base + HW_USBPHY_DEBUG_CLR);
regmap_write(regmap, ANADIG_USB1_LOOPBACK_SET,
ANADIG_USB1_LOOPBACK_UTMI_TESTSTART);
chgr_type = mxs_charger_secondary_detection(mxs_phy);
/* Stop the test */
regmap_write(regmap, ANADIG_USB1_LOOPBACK_CLR,
ANADIG_USB1_LOOPBACK_UTMI_TESTSTART);
writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
base + HW_USBPHY_DEBUG_SET);
}
return chgr_type;
}
static int mxs_phy_probe(struct platform_device *pdev)
{
struct resource *res;
void __iomem *base;
struct clk *clk;
struct mxs_phy *mxs_phy;
int ret;
const struct of_device_id *of_id;
struct device_node *np = pdev->dev.of_node;
u32 val;
of_id = of_match_device(mxs_phy_dt_ids, &pdev->dev);
if (!of_id)
return -ENODEV;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(clk)) {
dev_err(&pdev->dev,
"can't get the clock, err=%ld", PTR_ERR(clk));
return PTR_ERR(clk);
}
mxs_phy = devm_kzalloc(&pdev->dev, sizeof(*mxs_phy), GFP_KERNEL);
if (!mxs_phy)
return -ENOMEM;
/* Some SoCs don't have anatop registers */
if (of_get_property(np, "fsl,anatop", NULL)) {
mxs_phy->regmap_anatop = syscon_regmap_lookup_by_phandle
(np, "fsl,anatop");
if (IS_ERR(mxs_phy->regmap_anatop)) {
dev_dbg(&pdev->dev,
"failed to find regmap for anatop\n");
return PTR_ERR(mxs_phy->regmap_anatop);
}
}
/* Precompute which bits of the TX register are to be updated, if any */
if (!of_property_read_u32(np, "fsl,tx-cal-45-dn-ohms", &val) &&
val >= MXS_PHY_TX_CAL45_MIN && val <= MXS_PHY_TX_CAL45_MAX) {
/* Scale to a 4-bit value */
val = (MXS_PHY_TX_CAL45_MAX - val) * 0xF
/ (MXS_PHY_TX_CAL45_MAX - MXS_PHY_TX_CAL45_MIN);
mxs_phy->tx_reg_mask |= GM_USBPHY_TX_TXCAL45DN(~0);
mxs_phy->tx_reg_set |= GM_USBPHY_TX_TXCAL45DN(val);
}
if (!of_property_read_u32(np, "fsl,tx-cal-45-dp-ohms", &val) &&
val >= MXS_PHY_TX_CAL45_MIN && val <= MXS_PHY_TX_CAL45_MAX) {
/* Scale to a 4-bit value. */
val = (MXS_PHY_TX_CAL45_MAX - val) * 0xF
/ (MXS_PHY_TX_CAL45_MAX - MXS_PHY_TX_CAL45_MIN);
mxs_phy->tx_reg_mask |= GM_USBPHY_TX_TXCAL45DP(~0);
mxs_phy->tx_reg_set |= GM_USBPHY_TX_TXCAL45DP(val);
}
if (!of_property_read_u32(np, "fsl,tx-d-cal", &val) &&
val >= MXS_PHY_TX_D_CAL_MIN && val <= MXS_PHY_TX_D_CAL_MAX) {
/* Scale to a 4-bit value. Round up the values and heavily
* weight the rounding by adding 2/3 of the denominator.
*/
val = ((MXS_PHY_TX_D_CAL_MAX - val) * 0xF
+ (MXS_PHY_TX_D_CAL_MAX - MXS_PHY_TX_D_CAL_MIN) * 2/3)
/ (MXS_PHY_TX_D_CAL_MAX - MXS_PHY_TX_D_CAL_MIN);
mxs_phy->tx_reg_mask |= GM_USBPHY_TX_D_CAL(~0);
mxs_phy->tx_reg_set |= GM_USBPHY_TX_D_CAL(val);
}
ret = of_alias_get_id(np, "usbphy");
if (ret < 0)
dev_dbg(&pdev->dev, "failed to get alias id, errno %d\n", ret);
mxs_phy->port_id = ret;
mxs_phy->phy.io_priv = base;
mxs_phy->phy.dev = &pdev->dev;
mxs_phy->phy.label = DRIVER_NAME;
mxs_phy->phy.init = mxs_phy_init;
mxs_phy->phy.shutdown = mxs_phy_shutdown;
mxs_phy->phy.set_suspend = mxs_phy_suspend;
mxs_phy->phy.notify_connect = mxs_phy_on_connect;
mxs_phy->phy.notify_disconnect = mxs_phy_on_disconnect;
mxs_phy->phy.type = USB_PHY_TYPE_USB2;
mxs_phy->phy.set_wakeup = mxs_phy_set_wakeup;
mxs_phy->phy.charger_detect = mxs_phy_charger_detect;
mxs_phy->clk = clk;
mxs_phy->data = of_id->data;
platform_set_drvdata(pdev, mxs_phy);
device_set_wakeup_capable(&pdev->dev, true);
return usb_add_phy_dev(&mxs_phy->phy);
}
static int mxs_phy_remove(struct platform_device *pdev)
{
struct mxs_phy *mxs_phy = platform_get_drvdata(pdev);
usb_remove_phy(&mxs_phy->phy);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static void mxs_phy_enable_ldo_in_suspend(struct mxs_phy *mxs_phy, bool on)
{
unsigned int reg = on ? ANADIG_ANA_MISC0_SET : ANADIG_ANA_MISC0_CLR;
/* If the SoCs don't have anatop, quit */
if (!mxs_phy->regmap_anatop)
return;
if (is_imx6q_phy(mxs_phy))
regmap_write(mxs_phy->regmap_anatop, reg,
BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG);
else if (is_imx6sl_phy(mxs_phy))
regmap_write(mxs_phy->regmap_anatop,
reg, BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL);
}
static int mxs_phy_system_suspend(struct device *dev)
{
struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
if (device_may_wakeup(dev))
mxs_phy_enable_ldo_in_suspend(mxs_phy, true);
return 0;
}
static int mxs_phy_system_resume(struct device *dev)
{
struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
if (device_may_wakeup(dev))
mxs_phy_enable_ldo_in_suspend(mxs_phy, false);
return 0;
}
#endif /* CONFIG_PM_SLEEP */
static SIMPLE_DEV_PM_OPS(mxs_phy_pm, mxs_phy_system_suspend,
mxs_phy_system_resume);
static struct platform_driver mxs_phy_driver = {
.probe = mxs_phy_probe,
.remove = mxs_phy_remove,
.driver = {
.name = DRIVER_NAME,
.of_match_table = mxs_phy_dt_ids,
.pm = &mxs_phy_pm,
},
};
static int __init mxs_phy_module_init(void)
{
return platform_driver_register(&mxs_phy_driver);
}
postcore_initcall(mxs_phy_module_init);
static void __exit mxs_phy_module_exit(void)
{
platform_driver_unregister(&mxs_phy_driver);
}
module_exit(mxs_phy_module_exit);
MODULE_ALIAS("platform:mxs-usb-phy");
MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>");
MODULE_DESCRIPTION("Freescale MXS USB PHY driver");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink