337 lines
7.1 KiB
C
337 lines
7.1 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* snps_udc_plat.c - Synopsys UDC Platform Driver
|
|
*
|
|
* Copyright (C) 2016 Broadcom
|
|
*/
|
|
|
|
#include <linux/extcon.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/module.h>
|
|
#include <linux/dmapool.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/moduleparam.h>
|
|
#include "amd5536udc.h"
|
|
|
|
/* description */
|
|
#define UDC_MOD_DESCRIPTION "Synopsys UDC platform driver"
|
|
|
|
static void start_udc(struct udc *udc)
|
|
{
|
|
if (udc->driver) {
|
|
dev_info(udc->dev, "Connecting...\n");
|
|
udc_enable_dev_setup_interrupts(udc);
|
|
udc_basic_init(udc);
|
|
udc->connected = 1;
|
|
}
|
|
}
|
|
|
|
static void stop_udc(struct udc *udc)
|
|
{
|
|
int tmp;
|
|
u32 reg;
|
|
|
|
spin_lock(&udc->lock);
|
|
|
|
/* Flush the receieve fifo */
|
|
reg = readl(&udc->regs->ctl);
|
|
reg |= AMD_BIT(UDC_DEVCTL_SRX_FLUSH);
|
|
writel(reg, &udc->regs->ctl);
|
|
|
|
reg = readl(&udc->regs->ctl);
|
|
reg &= ~(AMD_BIT(UDC_DEVCTL_SRX_FLUSH));
|
|
writel(reg, &udc->regs->ctl);
|
|
dev_dbg(udc->dev, "ep rx queue flushed\n");
|
|
|
|
/* Mask interrupts. Required more so when the
|
|
* UDC is connected to a DRD phy.
|
|
*/
|
|
udc_mask_unused_interrupts(udc);
|
|
|
|
/* Disconnect gadget driver */
|
|
if (udc->driver) {
|
|
spin_unlock(&udc->lock);
|
|
udc->driver->disconnect(&udc->gadget);
|
|
spin_lock(&udc->lock);
|
|
|
|
/* empty queues */
|
|
for (tmp = 0; tmp < UDC_EP_NUM; tmp++)
|
|
empty_req_queue(&udc->ep[tmp]);
|
|
}
|
|
udc->connected = 0;
|
|
|
|
spin_unlock(&udc->lock);
|
|
dev_info(udc->dev, "Device disconnected\n");
|
|
}
|
|
|
|
static void udc_drd_work(struct work_struct *work)
|
|
{
|
|
struct udc *udc;
|
|
|
|
udc = container_of(to_delayed_work(work),
|
|
struct udc, drd_work);
|
|
|
|
if (udc->conn_type) {
|
|
dev_dbg(udc->dev, "idle -> device\n");
|
|
start_udc(udc);
|
|
} else {
|
|
dev_dbg(udc->dev, "device -> idle\n");
|
|
stop_udc(udc);
|
|
}
|
|
}
|
|
|
|
static int usbd_connect_notify(struct notifier_block *self,
|
|
unsigned long event, void *ptr)
|
|
{
|
|
struct udc *udc = container_of(self, struct udc, nb);
|
|
|
|
dev_dbg(udc->dev, "%s: event: %lu\n", __func__, event);
|
|
|
|
udc->conn_type = event;
|
|
|
|
schedule_delayed_work(&udc->drd_work, 0);
|
|
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
static int udc_plat_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct resource *res;
|
|
struct udc *udc;
|
|
int ret;
|
|
|
|
udc = devm_kzalloc(dev, sizeof(*udc), GFP_KERNEL);
|
|
if (!udc)
|
|
return -ENOMEM;
|
|
|
|
spin_lock_init(&udc->lock);
|
|
udc->dev = dev;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
udc->virt_addr = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(udc->virt_addr))
|
|
return PTR_ERR(udc->virt_addr);
|
|
|
|
/* udc csr registers base */
|
|
udc->csr = udc->virt_addr + UDC_CSR_ADDR;
|
|
|
|
/* dev registers base */
|
|
udc->regs = udc->virt_addr + UDC_DEVCFG_ADDR;
|
|
|
|
/* ep registers base */
|
|
udc->ep_regs = udc->virt_addr + UDC_EPREGS_ADDR;
|
|
|
|
/* fifo's base */
|
|
udc->rxfifo = (u32 __iomem *)(udc->virt_addr + UDC_RXFIFO_ADDR);
|
|
udc->txfifo = (u32 __iomem *)(udc->virt_addr + UDC_TXFIFO_ADDR);
|
|
|
|
udc->phys_addr = (unsigned long)res->start;
|
|
|
|
udc->irq = irq_of_parse_and_map(dev->of_node, 0);
|
|
if (udc->irq <= 0) {
|
|
dev_err(dev, "Can't parse and map interrupt\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
udc->udc_phy = devm_of_phy_get_by_index(dev, dev->of_node, 0);
|
|
if (IS_ERR(udc->udc_phy)) {
|
|
dev_err(dev, "Failed to obtain phy from device tree\n");
|
|
return PTR_ERR(udc->udc_phy);
|
|
}
|
|
|
|
ret = phy_init(udc->udc_phy);
|
|
if (ret) {
|
|
dev_err(dev, "UDC phy init failed");
|
|
return ret;
|
|
}
|
|
|
|
ret = phy_power_on(udc->udc_phy);
|
|
if (ret) {
|
|
dev_err(dev, "UDC phy power on failed");
|
|
phy_exit(udc->udc_phy);
|
|
return ret;
|
|
}
|
|
|
|
/* Register for extcon if supported */
|
|
if (of_get_property(dev->of_node, "extcon", NULL)) {
|
|
udc->edev = extcon_get_edev_by_phandle(dev, 0);
|
|
if (IS_ERR(udc->edev)) {
|
|
if (PTR_ERR(udc->edev) == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
dev_err(dev, "Invalid or missing extcon\n");
|
|
ret = PTR_ERR(udc->edev);
|
|
goto exit_phy;
|
|
}
|
|
|
|
udc->nb.notifier_call = usbd_connect_notify;
|
|
ret = extcon_register_notifier(udc->edev, EXTCON_USB,
|
|
&udc->nb);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Can't register extcon device\n");
|
|
goto exit_phy;
|
|
}
|
|
|
|
ret = extcon_get_state(udc->edev, EXTCON_USB);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Can't get cable state\n");
|
|
goto exit_extcon;
|
|
} else if (ret) {
|
|
udc->conn_type = ret;
|
|
}
|
|
INIT_DELAYED_WORK(&udc->drd_work, udc_drd_work);
|
|
}
|
|
|
|
/* init dma pools */
|
|
if (use_dma) {
|
|
ret = init_dma_pools(udc);
|
|
if (ret != 0)
|
|
goto exit_extcon;
|
|
}
|
|
|
|
ret = devm_request_irq(dev, udc->irq, udc_irq, IRQF_SHARED,
|
|
"snps-udc", udc);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Request irq %d failed for UDC\n", udc->irq);
|
|
goto exit_dma;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, udc);
|
|
udc->chiprev = UDC_BCM_REV;
|
|
|
|
if (udc_probe(udc)) {
|
|
ret = -ENODEV;
|
|
goto exit_dma;
|
|
}
|
|
dev_info(dev, "Synopsys UDC platform driver probe successful\n");
|
|
|
|
return 0;
|
|
|
|
exit_dma:
|
|
if (use_dma)
|
|
free_dma_pools(udc);
|
|
exit_extcon:
|
|
if (udc->edev)
|
|
extcon_unregister_notifier(udc->edev, EXTCON_USB, &udc->nb);
|
|
exit_phy:
|
|
if (udc->udc_phy) {
|
|
phy_power_off(udc->udc_phy);
|
|
phy_exit(udc->udc_phy);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int udc_plat_remove(struct platform_device *pdev)
|
|
{
|
|
struct udc *dev;
|
|
|
|
dev = platform_get_drvdata(pdev);
|
|
|
|
usb_del_gadget_udc(&dev->gadget);
|
|
/* gadget driver must not be registered */
|
|
if (WARN_ON(dev->driver))
|
|
return 0;
|
|
|
|
/* dma pool cleanup */
|
|
free_dma_pools(dev);
|
|
|
|
udc_remove(dev);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
if (dev->drd_wq) {
|
|
flush_workqueue(dev->drd_wq);
|
|
destroy_workqueue(dev->drd_wq);
|
|
}
|
|
|
|
phy_power_off(dev->udc_phy);
|
|
phy_exit(dev->udc_phy);
|
|
extcon_unregister_notifier(dev->edev, EXTCON_USB, &dev->nb);
|
|
|
|
dev_info(&pdev->dev, "Synopsys UDC platform driver removed\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int udc_plat_suspend(struct device *dev)
|
|
{
|
|
struct udc *udc;
|
|
|
|
udc = dev_get_drvdata(dev);
|
|
stop_udc(udc);
|
|
|
|
if (extcon_get_state(udc->edev, EXTCON_USB) > 0) {
|
|
dev_dbg(udc->dev, "device -> idle\n");
|
|
stop_udc(udc);
|
|
}
|
|
phy_power_off(udc->udc_phy);
|
|
phy_exit(udc->udc_phy);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int udc_plat_resume(struct device *dev)
|
|
{
|
|
struct udc *udc;
|
|
int ret;
|
|
|
|
udc = dev_get_drvdata(dev);
|
|
|
|
ret = phy_init(udc->udc_phy);
|
|
if (ret) {
|
|
dev_err(udc->dev, "UDC phy init failure");
|
|
return ret;
|
|
}
|
|
|
|
ret = phy_power_on(udc->udc_phy);
|
|
if (ret) {
|
|
dev_err(udc->dev, "UDC phy power on failure");
|
|
phy_exit(udc->udc_phy);
|
|
return ret;
|
|
}
|
|
|
|
if (extcon_get_state(udc->edev, EXTCON_USB) > 0) {
|
|
dev_dbg(udc->dev, "idle -> device\n");
|
|
start_udc(udc);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
static const struct dev_pm_ops udc_plat_pm_ops = {
|
|
.suspend = udc_plat_suspend,
|
|
.resume = udc_plat_resume,
|
|
};
|
|
#endif
|
|
|
|
#if defined(CONFIG_OF)
|
|
static const struct of_device_id of_udc_match[] = {
|
|
{ .compatible = "brcm,ns2-udc", },
|
|
{ .compatible = "brcm,cygnus-udc", },
|
|
{ .compatible = "brcm,iproc-udc", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, of_udc_match);
|
|
#endif
|
|
|
|
static struct platform_driver udc_plat_driver = {
|
|
.probe = udc_plat_probe,
|
|
.remove = udc_plat_remove,
|
|
.driver = {
|
|
.name = "snps-udc-plat",
|
|
.of_match_table = of_match_ptr(of_udc_match),
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.pm = &udc_plat_pm_ops,
|
|
#endif
|
|
},
|
|
};
|
|
module_platform_driver(udc_plat_driver);
|
|
|
|
MODULE_DESCRIPTION(UDC_MOD_DESCRIPTION);
|
|
MODULE_AUTHOR("Broadcom");
|
|
MODULE_LICENSE("GPL v2");
|