605 lines
14 KiB
C
605 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Haoyu HYM8563 RTC driver
|
|
*
|
|
* Copyright (C) 2013 MundoReader S.L.
|
|
* Author: Heiko Stuebner <heiko@sntech.de>
|
|
*
|
|
* based on rtc-HYM8563
|
|
* Copyright (C) 2010 ROCKCHIP, Inc.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/bcd.h>
|
|
#include <linux/rtc.h>
|
|
|
|
#define HYM8563_CTL1 0x00
|
|
#define HYM8563_CTL1_TEST BIT(7)
|
|
#define HYM8563_CTL1_STOP BIT(5)
|
|
#define HYM8563_CTL1_TESTC BIT(3)
|
|
|
|
#define HYM8563_CTL2 0x01
|
|
#define HYM8563_CTL2_TI_TP BIT(4)
|
|
#define HYM8563_CTL2_AF BIT(3)
|
|
#define HYM8563_CTL2_TF BIT(2)
|
|
#define HYM8563_CTL2_AIE BIT(1)
|
|
#define HYM8563_CTL2_TIE BIT(0)
|
|
|
|
#define HYM8563_SEC 0x02
|
|
#define HYM8563_SEC_VL BIT(7)
|
|
#define HYM8563_SEC_MASK 0x7f
|
|
|
|
#define HYM8563_MIN 0x03
|
|
#define HYM8563_MIN_MASK 0x7f
|
|
|
|
#define HYM8563_HOUR 0x04
|
|
#define HYM8563_HOUR_MASK 0x3f
|
|
|
|
#define HYM8563_DAY 0x05
|
|
#define HYM8563_DAY_MASK 0x3f
|
|
|
|
#define HYM8563_WEEKDAY 0x06
|
|
#define HYM8563_WEEKDAY_MASK 0x07
|
|
|
|
#define HYM8563_MONTH 0x07
|
|
#define HYM8563_MONTH_CENTURY BIT(7)
|
|
#define HYM8563_MONTH_MASK 0x1f
|
|
|
|
#define HYM8563_YEAR 0x08
|
|
|
|
#define HYM8563_ALM_MIN 0x09
|
|
#define HYM8563_ALM_HOUR 0x0a
|
|
#define HYM8563_ALM_DAY 0x0b
|
|
#define HYM8563_ALM_WEEK 0x0c
|
|
|
|
/* Each alarm check can be disabled by setting this bit in the register */
|
|
#define HYM8563_ALM_BIT_DISABLE BIT(7)
|
|
|
|
#define HYM8563_CLKOUT 0x0d
|
|
#define HYM8563_CLKOUT_ENABLE BIT(7)
|
|
#define HYM8563_CLKOUT_32768 0
|
|
#define HYM8563_CLKOUT_1024 1
|
|
#define HYM8563_CLKOUT_32 2
|
|
#define HYM8563_CLKOUT_1 3
|
|
#define HYM8563_CLKOUT_MASK 3
|
|
|
|
#define HYM8563_TMR_CTL 0x0e
|
|
#define HYM8563_TMR_CTL_ENABLE BIT(7)
|
|
#define HYM8563_TMR_CTL_4096 0
|
|
#define HYM8563_TMR_CTL_64 1
|
|
#define HYM8563_TMR_CTL_1 2
|
|
#define HYM8563_TMR_CTL_1_60 3
|
|
#define HYM8563_TMR_CTL_MASK 3
|
|
|
|
#define HYM8563_TMR_CNT 0x0f
|
|
|
|
struct hym8563 {
|
|
struct i2c_client *client;
|
|
struct rtc_device *rtc;
|
|
bool valid;
|
|
#ifdef CONFIG_COMMON_CLK
|
|
struct clk_hw clkout_hw;
|
|
#endif
|
|
};
|
|
|
|
/*
|
|
* RTC handling
|
|
*/
|
|
|
|
static int hym8563_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct hym8563 *hym8563 = i2c_get_clientdata(client);
|
|
u8 buf[7];
|
|
int ret;
|
|
|
|
if (!hym8563->valid) {
|
|
dev_warn(&client->dev, "no valid clock/calendar values available\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = i2c_smbus_read_i2c_block_data(client, HYM8563_SEC, 7, buf);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
tm->tm_sec = bcd2bin(buf[0] & HYM8563_SEC_MASK);
|
|
tm->tm_min = bcd2bin(buf[1] & HYM8563_MIN_MASK);
|
|
tm->tm_hour = bcd2bin(buf[2] & HYM8563_HOUR_MASK);
|
|
tm->tm_mday = bcd2bin(buf[3] & HYM8563_DAY_MASK);
|
|
tm->tm_wday = bcd2bin(buf[4] & HYM8563_WEEKDAY_MASK); /* 0 = Sun */
|
|
tm->tm_mon = bcd2bin(buf[5] & HYM8563_MONTH_MASK) - 1; /* 0 = Jan */
|
|
tm->tm_year = bcd2bin(buf[6]) + 100;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hym8563_rtc_set_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct hym8563 *hym8563 = i2c_get_clientdata(client);
|
|
u8 buf[7];
|
|
int ret;
|
|
|
|
/* Years >= 2100 are to far in the future, 19XX is to early */
|
|
if (tm->tm_year < 100 || tm->tm_year >= 200)
|
|
return -EINVAL;
|
|
|
|
buf[0] = bin2bcd(tm->tm_sec);
|
|
buf[1] = bin2bcd(tm->tm_min);
|
|
buf[2] = bin2bcd(tm->tm_hour);
|
|
buf[3] = bin2bcd(tm->tm_mday);
|
|
buf[4] = bin2bcd(tm->tm_wday);
|
|
buf[5] = bin2bcd(tm->tm_mon + 1);
|
|
|
|
/*
|
|
* While the HYM8563 has a century flag in the month register,
|
|
* it does not seem to carry it over a subsequent write/read.
|
|
* So we'll limit ourself to 100 years, starting at 2000 for now.
|
|
*/
|
|
buf[6] = bin2bcd(tm->tm_year - 100);
|
|
|
|
/*
|
|
* CTL1 only contains TEST-mode bits apart from stop,
|
|
* so no need to read the value first
|
|
*/
|
|
ret = i2c_smbus_write_byte_data(client, HYM8563_CTL1,
|
|
HYM8563_CTL1_STOP);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = i2c_smbus_write_i2c_block_data(client, HYM8563_SEC, 7, buf);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = i2c_smbus_write_byte_data(client, HYM8563_CTL1, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
hym8563->valid = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hym8563_rtc_alarm_irq_enable(struct device *dev,
|
|
unsigned int enabled)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
int data;
|
|
|
|
data = i2c_smbus_read_byte_data(client, HYM8563_CTL2);
|
|
if (data < 0)
|
|
return data;
|
|
|
|
if (enabled)
|
|
data |= HYM8563_CTL2_AIE;
|
|
else
|
|
data &= ~HYM8563_CTL2_AIE;
|
|
|
|
return i2c_smbus_write_byte_data(client, HYM8563_CTL2, data);
|
|
};
|
|
|
|
static int hym8563_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct rtc_time *alm_tm = &alm->time;
|
|
u8 buf[4];
|
|
int ret;
|
|
|
|
ret = i2c_smbus_read_i2c_block_data(client, HYM8563_ALM_MIN, 4, buf);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* The alarm only has a minute accuracy */
|
|
alm_tm->tm_sec = 0;
|
|
|
|
alm_tm->tm_min = (buf[0] & HYM8563_ALM_BIT_DISABLE) ?
|
|
-1 :
|
|
bcd2bin(buf[0] & HYM8563_MIN_MASK);
|
|
alm_tm->tm_hour = (buf[1] & HYM8563_ALM_BIT_DISABLE) ?
|
|
-1 :
|
|
bcd2bin(buf[1] & HYM8563_HOUR_MASK);
|
|
alm_tm->tm_mday = (buf[2] & HYM8563_ALM_BIT_DISABLE) ?
|
|
-1 :
|
|
bcd2bin(buf[2] & HYM8563_DAY_MASK);
|
|
alm_tm->tm_wday = (buf[3] & HYM8563_ALM_BIT_DISABLE) ?
|
|
-1 :
|
|
bcd2bin(buf[3] & HYM8563_WEEKDAY_MASK);
|
|
|
|
ret = i2c_smbus_read_byte_data(client, HYM8563_CTL2);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (ret & HYM8563_CTL2_AIE)
|
|
alm->enabled = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hym8563_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct rtc_time *alm_tm = &alm->time;
|
|
u8 buf[4];
|
|
int ret;
|
|
|
|
/*
|
|
* The alarm has no seconds so deal with it
|
|
*/
|
|
if (alm_tm->tm_sec) {
|
|
alm_tm->tm_sec = 0;
|
|
alm_tm->tm_min++;
|
|
if (alm_tm->tm_min >= 60) {
|
|
alm_tm->tm_min = 0;
|
|
alm_tm->tm_hour++;
|
|
if (alm_tm->tm_hour >= 24) {
|
|
alm_tm->tm_hour = 0;
|
|
alm_tm->tm_mday++;
|
|
if (alm_tm->tm_mday > 31)
|
|
alm_tm->tm_mday = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
ret = i2c_smbus_read_byte_data(client, HYM8563_CTL2);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret &= ~HYM8563_CTL2_AIE;
|
|
|
|
ret = i2c_smbus_write_byte_data(client, HYM8563_CTL2, ret);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
buf[0] = (alm_tm->tm_min < 60 && alm_tm->tm_min >= 0) ?
|
|
bin2bcd(alm_tm->tm_min) : HYM8563_ALM_BIT_DISABLE;
|
|
|
|
buf[1] = (alm_tm->tm_hour < 24 && alm_tm->tm_hour >= 0) ?
|
|
bin2bcd(alm_tm->tm_hour) : HYM8563_ALM_BIT_DISABLE;
|
|
|
|
buf[2] = (alm_tm->tm_mday <= 31 && alm_tm->tm_mday >= 1) ?
|
|
bin2bcd(alm_tm->tm_mday) : HYM8563_ALM_BIT_DISABLE;
|
|
|
|
buf[3] = (alm_tm->tm_wday < 7 && alm_tm->tm_wday >= 0) ?
|
|
bin2bcd(alm_tm->tm_wday) : HYM8563_ALM_BIT_DISABLE;
|
|
|
|
ret = i2c_smbus_write_i2c_block_data(client, HYM8563_ALM_MIN, 4, buf);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return hym8563_rtc_alarm_irq_enable(dev, alm->enabled);
|
|
}
|
|
|
|
static const struct rtc_class_ops hym8563_rtc_ops = {
|
|
.read_time = hym8563_rtc_read_time,
|
|
.set_time = hym8563_rtc_set_time,
|
|
.alarm_irq_enable = hym8563_rtc_alarm_irq_enable,
|
|
.read_alarm = hym8563_rtc_read_alarm,
|
|
.set_alarm = hym8563_rtc_set_alarm,
|
|
};
|
|
|
|
/*
|
|
* Handling of the clkout
|
|
*/
|
|
|
|
#ifdef CONFIG_COMMON_CLK
|
|
#define clkout_hw_to_hym8563(_hw) container_of(_hw, struct hym8563, clkout_hw)
|
|
|
|
static int clkout_rates[] = {
|
|
32768,
|
|
1024,
|
|
32,
|
|
1,
|
|
};
|
|
|
|
static unsigned long hym8563_clkout_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct hym8563 *hym8563 = clkout_hw_to_hym8563(hw);
|
|
struct i2c_client *client = hym8563->client;
|
|
int ret = i2c_smbus_read_byte_data(client, HYM8563_CLKOUT);
|
|
|
|
if (ret < 0)
|
|
return 0;
|
|
|
|
ret &= HYM8563_CLKOUT_MASK;
|
|
return clkout_rates[ret];
|
|
}
|
|
|
|
static long hym8563_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *prate)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
|
|
if (clkout_rates[i] <= rate)
|
|
return clkout_rates[i];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hym8563_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct hym8563 *hym8563 = clkout_hw_to_hym8563(hw);
|
|
struct i2c_client *client = hym8563->client;
|
|
int ret = i2c_smbus_read_byte_data(client, HYM8563_CLKOUT);
|
|
int i;
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
|
|
if (clkout_rates[i] == rate) {
|
|
ret &= ~HYM8563_CLKOUT_MASK;
|
|
ret |= i;
|
|
return i2c_smbus_write_byte_data(client,
|
|
HYM8563_CLKOUT, ret);
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int hym8563_clkout_control(struct clk_hw *hw, bool enable)
|
|
{
|
|
struct hym8563 *hym8563 = clkout_hw_to_hym8563(hw);
|
|
struct i2c_client *client = hym8563->client;
|
|
int ret = i2c_smbus_read_byte_data(client, HYM8563_CLKOUT);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (enable)
|
|
ret |= HYM8563_CLKOUT_ENABLE;
|
|
else
|
|
ret &= ~HYM8563_CLKOUT_ENABLE;
|
|
|
|
return i2c_smbus_write_byte_data(client, HYM8563_CLKOUT, ret);
|
|
}
|
|
|
|
static int hym8563_clkout_prepare(struct clk_hw *hw)
|
|
{
|
|
return hym8563_clkout_control(hw, 1);
|
|
}
|
|
|
|
static void hym8563_clkout_unprepare(struct clk_hw *hw)
|
|
{
|
|
hym8563_clkout_control(hw, 0);
|
|
}
|
|
|
|
static int hym8563_clkout_is_prepared(struct clk_hw *hw)
|
|
{
|
|
struct hym8563 *hym8563 = clkout_hw_to_hym8563(hw);
|
|
struct i2c_client *client = hym8563->client;
|
|
int ret = i2c_smbus_read_byte_data(client, HYM8563_CLKOUT);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return !!(ret & HYM8563_CLKOUT_ENABLE);
|
|
}
|
|
|
|
static const struct clk_ops hym8563_clkout_ops = {
|
|
.prepare = hym8563_clkout_prepare,
|
|
.unprepare = hym8563_clkout_unprepare,
|
|
.is_prepared = hym8563_clkout_is_prepared,
|
|
.recalc_rate = hym8563_clkout_recalc_rate,
|
|
.round_rate = hym8563_clkout_round_rate,
|
|
.set_rate = hym8563_clkout_set_rate,
|
|
};
|
|
|
|
static struct clk *hym8563_clkout_register_clk(struct hym8563 *hym8563)
|
|
{
|
|
struct i2c_client *client = hym8563->client;
|
|
struct device_node *node = client->dev.of_node;
|
|
struct clk *clk;
|
|
struct clk_init_data init;
|
|
int ret;
|
|
|
|
ret = i2c_smbus_write_byte_data(client, HYM8563_CLKOUT,
|
|
0);
|
|
if (ret < 0)
|
|
return ERR_PTR(ret);
|
|
|
|
init.name = "hym8563-clkout";
|
|
init.ops = &hym8563_clkout_ops;
|
|
init.flags = 0;
|
|
init.parent_names = NULL;
|
|
init.num_parents = 0;
|
|
hym8563->clkout_hw.init = &init;
|
|
|
|
/* optional override of the clockname */
|
|
of_property_read_string(node, "clock-output-names", &init.name);
|
|
|
|
/* register the clock */
|
|
clk = clk_register(&client->dev, &hym8563->clkout_hw);
|
|
|
|
if (!IS_ERR(clk))
|
|
of_clk_add_provider(node, of_clk_src_simple_get, clk);
|
|
|
|
return clk;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* The alarm interrupt is implemented as a level-low interrupt in the
|
|
* hym8563, while the timer interrupt uses a falling edge.
|
|
* We don't use the timer at all, so the interrupt is requested to
|
|
* use the level-low trigger.
|
|
*/
|
|
static irqreturn_t hym8563_irq(int irq, void *dev_id)
|
|
{
|
|
struct hym8563 *hym8563 = (struct hym8563 *)dev_id;
|
|
struct i2c_client *client = hym8563->client;
|
|
struct mutex *lock = &hym8563->rtc->ops_lock;
|
|
int data, ret;
|
|
|
|
mutex_lock(lock);
|
|
|
|
/* Clear the alarm flag */
|
|
|
|
data = i2c_smbus_read_byte_data(client, HYM8563_CTL2);
|
|
if (data < 0) {
|
|
dev_err(&client->dev, "%s: error reading i2c data %d\n",
|
|
__func__, data);
|
|
goto out;
|
|
}
|
|
|
|
data &= ~HYM8563_CTL2_AF;
|
|
|
|
ret = i2c_smbus_write_byte_data(client, HYM8563_CTL2, data);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "%s: error writing i2c data %d\n",
|
|
__func__, ret);
|
|
}
|
|
|
|
out:
|
|
mutex_unlock(lock);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int hym8563_init_device(struct i2c_client *client)
|
|
{
|
|
int ret;
|
|
|
|
/* Clear stop flag if present */
|
|
ret = i2c_smbus_write_byte_data(client, HYM8563_CTL1, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = i2c_smbus_read_byte_data(client, HYM8563_CTL2);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Disable alarm and timer interrupts */
|
|
ret &= ~HYM8563_CTL2_AIE;
|
|
ret &= ~HYM8563_CTL2_TIE;
|
|
|
|
/* Clear any pending alarm and timer flags */
|
|
if (ret & HYM8563_CTL2_AF)
|
|
ret &= ~HYM8563_CTL2_AF;
|
|
|
|
if (ret & HYM8563_CTL2_TF)
|
|
ret &= ~HYM8563_CTL2_TF;
|
|
|
|
ret &= ~HYM8563_CTL2_TI_TP;
|
|
|
|
return i2c_smbus_write_byte_data(client, HYM8563_CTL2, ret);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int hym8563_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
int ret;
|
|
|
|
if (device_may_wakeup(dev)) {
|
|
ret = enable_irq_wake(client->irq);
|
|
if (ret) {
|
|
dev_err(dev, "enable_irq_wake failed, %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hym8563_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
|
|
if (device_may_wakeup(dev))
|
|
disable_irq_wake(client->irq);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(hym8563_pm_ops, hym8563_suspend, hym8563_resume);
|
|
|
|
static int hym8563_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct hym8563 *hym8563;
|
|
int ret;
|
|
|
|
hym8563 = devm_kzalloc(&client->dev, sizeof(*hym8563), GFP_KERNEL);
|
|
if (!hym8563)
|
|
return -ENOMEM;
|
|
|
|
hym8563->client = client;
|
|
i2c_set_clientdata(client, hym8563);
|
|
|
|
device_set_wakeup_capable(&client->dev, true);
|
|
|
|
ret = hym8563_init_device(client);
|
|
if (ret) {
|
|
dev_err(&client->dev, "could not init device, %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (client->irq > 0) {
|
|
ret = devm_request_threaded_irq(&client->dev, client->irq,
|
|
NULL, hym8563_irq,
|
|
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
|
|
client->name, hym8563);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "irq %d request failed, %d\n",
|
|
client->irq, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* check state of calendar information */
|
|
ret = i2c_smbus_read_byte_data(client, HYM8563_SEC);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
hym8563->valid = !(ret & HYM8563_SEC_VL);
|
|
dev_dbg(&client->dev, "rtc information is %s\n",
|
|
hym8563->valid ? "valid" : "invalid");
|
|
|
|
hym8563->rtc = devm_rtc_device_register(&client->dev, client->name,
|
|
&hym8563_rtc_ops, THIS_MODULE);
|
|
if (IS_ERR(hym8563->rtc))
|
|
return PTR_ERR(hym8563->rtc);
|
|
|
|
/* the hym8563 alarm only supports a minute accuracy */
|
|
hym8563->rtc->uie_unsupported = 1;
|
|
|
|
#ifdef CONFIG_COMMON_CLK
|
|
hym8563_clkout_register_clk(hym8563);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id hym8563_id[] = {
|
|
{ "hym8563", 0 },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, hym8563_id);
|
|
|
|
static const struct of_device_id hym8563_dt_idtable[] = {
|
|
{ .compatible = "haoyu,hym8563" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, hym8563_dt_idtable);
|
|
|
|
static struct i2c_driver hym8563_driver = {
|
|
.driver = {
|
|
.name = "rtc-hym8563",
|
|
.pm = &hym8563_pm_ops,
|
|
.of_match_table = hym8563_dt_idtable,
|
|
},
|
|
.probe = hym8563_probe,
|
|
.id_table = hym8563_id,
|
|
};
|
|
|
|
module_i2c_driver(hym8563_driver);
|
|
|
|
MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
|
|
MODULE_DESCRIPTION("HYM8563 RTC driver");
|
|
MODULE_LICENSE("GPL");
|