453 lines
11 KiB
C
453 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* omap-usb2.c - USB PHY, talking to musb controller in OMAP.
|
|
*
|
|
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
|
|
* Author: Kishon Vijay Abraham I <kishon@ti.com>
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/of.h>
|
|
#include <linux/io.h>
|
|
#include <linux/phy/omap_usb.h>
|
|
#include <linux/usb/phy_companion.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/phy/omap_control_phy.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/of_platform.h>
|
|
|
|
#define USB2PHY_DISCON_BYP_LATCH (1 << 31)
|
|
#define USB2PHY_ANA_CONFIG1 0x4c
|
|
|
|
#define AM654_USB2_OTG_PD BIT(8)
|
|
#define AM654_USB2_VBUS_DET_EN BIT(5)
|
|
#define AM654_USB2_VBUSVALID_DET_EN BIT(4)
|
|
|
|
/**
|
|
* omap_usb2_set_comparator - links the comparator present in the sytem with
|
|
* this phy
|
|
* @comparator - the companion phy(comparator) for this phy
|
|
*
|
|
* The phy companion driver should call this API passing the phy_companion
|
|
* filled with set_vbus and start_srp to be used by usb phy.
|
|
*
|
|
* For use by phy companion driver
|
|
*/
|
|
int omap_usb2_set_comparator(struct phy_companion *comparator)
|
|
{
|
|
struct omap_usb *phy;
|
|
struct usb_phy *x = usb_get_phy(USB_PHY_TYPE_USB2);
|
|
|
|
if (IS_ERR(x))
|
|
return -ENODEV;
|
|
|
|
phy = phy_to_omapusb(x);
|
|
phy->comparator = comparator;
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(omap_usb2_set_comparator);
|
|
|
|
static int omap_usb_set_vbus(struct usb_otg *otg, bool enabled)
|
|
{
|
|
struct omap_usb *phy = phy_to_omapusb(otg->usb_phy);
|
|
|
|
if (!phy->comparator)
|
|
return -ENODEV;
|
|
|
|
return phy->comparator->set_vbus(phy->comparator, enabled);
|
|
}
|
|
|
|
static int omap_usb_start_srp(struct usb_otg *otg)
|
|
{
|
|
struct omap_usb *phy = phy_to_omapusb(otg->usb_phy);
|
|
|
|
if (!phy->comparator)
|
|
return -ENODEV;
|
|
|
|
return phy->comparator->start_srp(phy->comparator);
|
|
}
|
|
|
|
static int omap_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
|
|
{
|
|
otg->host = host;
|
|
if (!host)
|
|
otg->state = OTG_STATE_UNDEFINED;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_usb_set_peripheral(struct usb_otg *otg,
|
|
struct usb_gadget *gadget)
|
|
{
|
|
otg->gadget = gadget;
|
|
if (!gadget)
|
|
otg->state = OTG_STATE_UNDEFINED;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_usb_phy_power(struct omap_usb *phy, int on)
|
|
{
|
|
u32 val;
|
|
int ret;
|
|
|
|
if (!phy->syscon_phy_power) {
|
|
omap_control_phy_power(phy->control_dev, on);
|
|
return 0;
|
|
}
|
|
|
|
if (on)
|
|
val = phy->power_on;
|
|
else
|
|
val = phy->power_off;
|
|
|
|
ret = regmap_update_bits(phy->syscon_phy_power, phy->power_reg,
|
|
phy->mask, val);
|
|
return ret;
|
|
}
|
|
|
|
static int omap_usb_power_off(struct phy *x)
|
|
{
|
|
struct omap_usb *phy = phy_get_drvdata(x);
|
|
|
|
return omap_usb_phy_power(phy, false);
|
|
}
|
|
|
|
static int omap_usb_power_on(struct phy *x)
|
|
{
|
|
struct omap_usb *phy = phy_get_drvdata(x);
|
|
|
|
return omap_usb_phy_power(phy, true);
|
|
}
|
|
|
|
static int omap_usb2_disable_clocks(struct omap_usb *phy)
|
|
{
|
|
clk_disable_unprepare(phy->wkupclk);
|
|
if (!IS_ERR(phy->optclk))
|
|
clk_disable_unprepare(phy->optclk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_usb2_enable_clocks(struct omap_usb *phy)
|
|
{
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(phy->wkupclk);
|
|
if (ret < 0) {
|
|
dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
|
|
goto err0;
|
|
}
|
|
|
|
if (!IS_ERR(phy->optclk)) {
|
|
ret = clk_prepare_enable(phy->optclk);
|
|
if (ret < 0) {
|
|
dev_err(phy->dev, "Failed to enable optclk %d\n", ret);
|
|
goto err1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
err1:
|
|
clk_disable_unprepare(phy->wkupclk);
|
|
|
|
err0:
|
|
return ret;
|
|
}
|
|
|
|
static int omap_usb_init(struct phy *x)
|
|
{
|
|
struct omap_usb *phy = phy_get_drvdata(x);
|
|
u32 val;
|
|
|
|
omap_usb2_enable_clocks(phy);
|
|
|
|
if (phy->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) {
|
|
/*
|
|
*
|
|
* Reduce the sensitivity of internal PHY by enabling the
|
|
* DISCON_BYP_LATCH of the USB2PHY_ANA_CONFIG1 register. This
|
|
* resolves issues with certain devices which can otherwise
|
|
* be prone to false disconnects.
|
|
*
|
|
*/
|
|
val = omap_usb_readl(phy->phy_base, USB2PHY_ANA_CONFIG1);
|
|
val |= USB2PHY_DISCON_BYP_LATCH;
|
|
omap_usb_writel(phy->phy_base, USB2PHY_ANA_CONFIG1, val);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_usb_exit(struct phy *x)
|
|
{
|
|
struct omap_usb *phy = phy_get_drvdata(x);
|
|
|
|
return omap_usb2_disable_clocks(phy);
|
|
}
|
|
|
|
static const struct phy_ops ops = {
|
|
.init = omap_usb_init,
|
|
.exit = omap_usb_exit,
|
|
.power_on = omap_usb_power_on,
|
|
.power_off = omap_usb_power_off,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static const struct usb_phy_data omap_usb2_data = {
|
|
.label = "omap_usb2",
|
|
.flags = OMAP_USB2_HAS_START_SRP | OMAP_USB2_HAS_SET_VBUS,
|
|
.mask = OMAP_DEV_PHY_PD,
|
|
.power_off = OMAP_DEV_PHY_PD,
|
|
};
|
|
|
|
static const struct usb_phy_data omap5_usb2_data = {
|
|
.label = "omap5_usb2",
|
|
.flags = 0,
|
|
.mask = OMAP_DEV_PHY_PD,
|
|
.power_off = OMAP_DEV_PHY_PD,
|
|
};
|
|
|
|
static const struct usb_phy_data dra7x_usb2_data = {
|
|
.label = "dra7x_usb2",
|
|
.flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
|
|
.mask = OMAP_DEV_PHY_PD,
|
|
.power_off = OMAP_DEV_PHY_PD,
|
|
};
|
|
|
|
static const struct usb_phy_data dra7x_usb2_phy2_data = {
|
|
.label = "dra7x_usb2_phy2",
|
|
.flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
|
|
.mask = OMAP_USB2_PHY_PD,
|
|
.power_off = OMAP_USB2_PHY_PD,
|
|
};
|
|
|
|
static const struct usb_phy_data am437x_usb2_data = {
|
|
.label = "am437x_usb2",
|
|
.flags = 0,
|
|
.mask = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD |
|
|
AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN,
|
|
.power_on = AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN,
|
|
.power_off = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD,
|
|
};
|
|
|
|
static const struct usb_phy_data am654_usb2_data = {
|
|
.label = "am654_usb2",
|
|
.flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
|
|
.mask = AM654_USB2_OTG_PD | AM654_USB2_VBUS_DET_EN |
|
|
AM654_USB2_VBUSVALID_DET_EN,
|
|
.power_on = AM654_USB2_VBUS_DET_EN | AM654_USB2_VBUSVALID_DET_EN,
|
|
.power_off = AM654_USB2_OTG_PD,
|
|
};
|
|
|
|
static const struct of_device_id omap_usb2_id_table[] = {
|
|
{
|
|
.compatible = "ti,omap-usb2",
|
|
.data = &omap_usb2_data,
|
|
},
|
|
{
|
|
.compatible = "ti,omap5-usb2",
|
|
.data = &omap5_usb2_data,
|
|
},
|
|
{
|
|
.compatible = "ti,dra7x-usb2",
|
|
.data = &dra7x_usb2_data,
|
|
},
|
|
{
|
|
.compatible = "ti,dra7x-usb2-phy2",
|
|
.data = &dra7x_usb2_phy2_data,
|
|
},
|
|
{
|
|
.compatible = "ti,am437x-usb2",
|
|
.data = &am437x_usb2_data,
|
|
},
|
|
{
|
|
.compatible = "ti,am654-usb2",
|
|
.data = &am654_usb2_data,
|
|
},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
|
|
|
|
static int omap_usb2_probe(struct platform_device *pdev)
|
|
{
|
|
struct omap_usb *phy;
|
|
struct phy *generic_phy;
|
|
struct resource *res;
|
|
struct phy_provider *phy_provider;
|
|
struct usb_otg *otg;
|
|
struct device_node *node = pdev->dev.of_node;
|
|
struct device_node *control_node;
|
|
struct platform_device *control_pdev;
|
|
const struct of_device_id *of_id;
|
|
struct usb_phy_data *phy_data;
|
|
|
|
of_id = of_match_device(omap_usb2_id_table, &pdev->dev);
|
|
|
|
if (!of_id)
|
|
return -EINVAL;
|
|
|
|
phy_data = (struct usb_phy_data *)of_id->data;
|
|
|
|
phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
|
|
if (!phy)
|
|
return -ENOMEM;
|
|
|
|
otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
|
|
if (!otg)
|
|
return -ENOMEM;
|
|
|
|
phy->dev = &pdev->dev;
|
|
|
|
phy->phy.dev = phy->dev;
|
|
phy->phy.label = phy_data->label;
|
|
phy->phy.otg = otg;
|
|
phy->phy.type = USB_PHY_TYPE_USB2;
|
|
phy->mask = phy_data->mask;
|
|
phy->power_on = phy_data->power_on;
|
|
phy->power_off = phy_data->power_off;
|
|
|
|
if (phy_data->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) {
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
phy->phy_base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(phy->phy_base))
|
|
return PTR_ERR(phy->phy_base);
|
|
phy->flags |= OMAP_USB2_CALIBRATE_FALSE_DISCONNECT;
|
|
}
|
|
|
|
phy->syscon_phy_power = syscon_regmap_lookup_by_phandle(node,
|
|
"syscon-phy-power");
|
|
if (IS_ERR(phy->syscon_phy_power)) {
|
|
dev_dbg(&pdev->dev,
|
|
"can't get syscon-phy-power, using control device\n");
|
|
phy->syscon_phy_power = NULL;
|
|
|
|
control_node = of_parse_phandle(node, "ctrl-module", 0);
|
|
if (!control_node) {
|
|
dev_err(&pdev->dev,
|
|
"Failed to get control device phandle\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
control_pdev = of_find_device_by_node(control_node);
|
|
if (!control_pdev) {
|
|
dev_err(&pdev->dev, "Failed to get control device\n");
|
|
return -EINVAL;
|
|
}
|
|
phy->control_dev = &control_pdev->dev;
|
|
} else {
|
|
if (of_property_read_u32_index(node,
|
|
"syscon-phy-power", 1,
|
|
&phy->power_reg)) {
|
|
dev_err(&pdev->dev,
|
|
"couldn't get power reg. offset\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
|
|
phy->wkupclk = devm_clk_get(phy->dev, "wkupclk");
|
|
if (IS_ERR(phy->wkupclk)) {
|
|
if (PTR_ERR(phy->wkupclk) == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
|
|
dev_warn(&pdev->dev, "unable to get wkupclk %ld, trying old name\n",
|
|
PTR_ERR(phy->wkupclk));
|
|
phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k");
|
|
|
|
if (IS_ERR(phy->wkupclk)) {
|
|
if (PTR_ERR(phy->wkupclk) != -EPROBE_DEFER)
|
|
dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n");
|
|
return PTR_ERR(phy->wkupclk);
|
|
} else {
|
|
dev_warn(&pdev->dev,
|
|
"found usb_phy_cm_clk32k, please fix DTS\n");
|
|
}
|
|
}
|
|
|
|
phy->optclk = devm_clk_get(phy->dev, "refclk");
|
|
if (IS_ERR(phy->optclk)) {
|
|
if (PTR_ERR(phy->optclk) == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
|
|
dev_dbg(&pdev->dev, "unable to get refclk, trying old name\n");
|
|
phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m");
|
|
|
|
if (IS_ERR(phy->optclk)) {
|
|
if (PTR_ERR(phy->optclk) != -EPROBE_DEFER) {
|
|
dev_dbg(&pdev->dev,
|
|
"unable to get usb_otg_ss_refclk960m\n");
|
|
}
|
|
} else {
|
|
dev_warn(&pdev->dev,
|
|
"found usb_otg_ss_refclk960m, please fix DTS\n");
|
|
}
|
|
}
|
|
|
|
otg->set_host = omap_usb_set_host;
|
|
otg->set_peripheral = omap_usb_set_peripheral;
|
|
if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS)
|
|
otg->set_vbus = omap_usb_set_vbus;
|
|
if (phy_data->flags & OMAP_USB2_HAS_START_SRP)
|
|
otg->start_srp = omap_usb_start_srp;
|
|
otg->usb_phy = &phy->phy;
|
|
|
|
platform_set_drvdata(pdev, phy);
|
|
pm_runtime_enable(phy->dev);
|
|
|
|
generic_phy = devm_phy_create(phy->dev, NULL, &ops);
|
|
if (IS_ERR(generic_phy)) {
|
|
pm_runtime_disable(phy->dev);
|
|
return PTR_ERR(generic_phy);
|
|
}
|
|
|
|
phy_set_drvdata(generic_phy, phy);
|
|
omap_usb_power_off(generic_phy);
|
|
|
|
phy_provider = devm_of_phy_provider_register(phy->dev,
|
|
of_phy_simple_xlate);
|
|
if (IS_ERR(phy_provider)) {
|
|
pm_runtime_disable(phy->dev);
|
|
return PTR_ERR(phy_provider);
|
|
}
|
|
|
|
|
|
usb_add_phy_dev(&phy->phy);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_usb2_remove(struct platform_device *pdev)
|
|
{
|
|
struct omap_usb *phy = platform_get_drvdata(pdev);
|
|
|
|
usb_remove_phy(&phy->phy);
|
|
pm_runtime_disable(phy->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver omap_usb2_driver = {
|
|
.probe = omap_usb2_probe,
|
|
.remove = omap_usb2_remove,
|
|
.driver = {
|
|
.name = "omap-usb2",
|
|
.of_match_table = omap_usb2_id_table,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(omap_usb2_driver);
|
|
|
|
MODULE_ALIAS("platform:omap_usb2");
|
|
MODULE_AUTHOR("Texas Instruments Inc.");
|
|
MODULE_DESCRIPTION("OMAP USB2 phy driver");
|
|
MODULE_LICENSE("GPL v2");
|