236 lines
7.0 KiB
C
236 lines
7.0 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* TSC frequency enumeration via MSR
|
|
*
|
|
* Copyright (C) 2013, 2018 Intel Corporation
|
|
* Author: Bin Gao <bin.gao@intel.com>
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <asm/apic.h>
|
|
#include <asm/cpu_device_id.h>
|
|
#include <asm/intel-family.h>
|
|
#include <asm/msr.h>
|
|
#include <asm/param.h>
|
|
#include <asm/tsc.h>
|
|
|
|
#define MAX_NUM_FREQS 16 /* 4 bits to select the frequency */
|
|
|
|
/*
|
|
* The frequency numbers in the SDM are e.g. 83.3 MHz, which does not contain a
|
|
* lot of accuracy which leads to clock drift. As far as we know Bay Trail SoCs
|
|
* use a 25 MHz crystal and Cherry Trail uses a 19.2 MHz crystal, the crystal
|
|
* is the source clk for a root PLL which outputs 1600 and 100 MHz. It is
|
|
* unclear if the root PLL outputs are used directly by the CPU clock PLL or
|
|
* if there is another PLL in between.
|
|
* This does not matter though, we can model the chain of PLLs as a single PLL
|
|
* with a quotient equal to the quotients of all PLLs in the chain multiplied.
|
|
* So we can create a simplified model of the CPU clock setup using a reference
|
|
* clock of 100 MHz plus a quotient which gets us as close to the frequency
|
|
* from the SDM as possible.
|
|
* For the 83.3 MHz example from above this would give us 100 MHz * 5 / 6 =
|
|
* 83 and 1/3 MHz, which matches exactly what has been measured on actual hw.
|
|
*/
|
|
#define TSC_REFERENCE_KHZ 100000
|
|
|
|
struct muldiv {
|
|
u32 multiplier;
|
|
u32 divider;
|
|
};
|
|
|
|
/*
|
|
* If MSR_PERF_STAT[31] is set, the maximum resolved bus ratio can be
|
|
* read in MSR_PLATFORM_ID[12:8], otherwise in MSR_PERF_STAT[44:40].
|
|
* Unfortunately some Intel Atom SoCs aren't quite compliant to this,
|
|
* so we need manually differentiate SoC families. This is what the
|
|
* field use_msr_plat does.
|
|
*/
|
|
struct freq_desc {
|
|
bool use_msr_plat;
|
|
struct muldiv muldiv[MAX_NUM_FREQS];
|
|
/*
|
|
* Some CPU frequencies in the SDM do not map to known PLL freqs, in
|
|
* that case the muldiv array is empty and the freqs array is used.
|
|
*/
|
|
u32 freqs[MAX_NUM_FREQS];
|
|
u32 mask;
|
|
};
|
|
|
|
/*
|
|
* Penwell and Clovertrail use spread spectrum clock,
|
|
* so the freq number is not exactly the same as reported
|
|
* by MSR based on SDM.
|
|
*/
|
|
static const struct freq_desc freq_desc_pnw = {
|
|
.use_msr_plat = false,
|
|
.freqs = { 0, 0, 0, 0, 0, 99840, 0, 83200 },
|
|
.mask = 0x07,
|
|
};
|
|
|
|
static const struct freq_desc freq_desc_clv = {
|
|
.use_msr_plat = false,
|
|
.freqs = { 0, 133200, 0, 0, 0, 99840, 0, 83200 },
|
|
.mask = 0x07,
|
|
};
|
|
|
|
/*
|
|
* Bay Trail SDM MSR_FSB_FREQ frequencies simplified PLL model:
|
|
* 000: 100 * 5 / 6 = 83.3333 MHz
|
|
* 001: 100 * 1 / 1 = 100.0000 MHz
|
|
* 010: 100 * 4 / 3 = 133.3333 MHz
|
|
* 011: 100 * 7 / 6 = 116.6667 MHz
|
|
* 100: 100 * 4 / 5 = 80.0000 MHz
|
|
*/
|
|
static const struct freq_desc freq_desc_byt = {
|
|
.use_msr_plat = true,
|
|
.muldiv = { { 5, 6 }, { 1, 1 }, { 4, 3 }, { 7, 6 },
|
|
{ 4, 5 } },
|
|
.mask = 0x07,
|
|
};
|
|
|
|
/*
|
|
* Cherry Trail SDM MSR_FSB_FREQ frequencies simplified PLL model:
|
|
* 0000: 100 * 5 / 6 = 83.3333 MHz
|
|
* 0001: 100 * 1 / 1 = 100.0000 MHz
|
|
* 0010: 100 * 4 / 3 = 133.3333 MHz
|
|
* 0011: 100 * 7 / 6 = 116.6667 MHz
|
|
* 0100: 100 * 4 / 5 = 80.0000 MHz
|
|
* 0101: 100 * 14 / 15 = 93.3333 MHz
|
|
* 0110: 100 * 9 / 10 = 90.0000 MHz
|
|
* 0111: 100 * 8 / 9 = 88.8889 MHz
|
|
* 1000: 100 * 7 / 8 = 87.5000 MHz
|
|
*/
|
|
static const struct freq_desc freq_desc_cht = {
|
|
.use_msr_plat = true,
|
|
.muldiv = { { 5, 6 }, { 1, 1 }, { 4, 3 }, { 7, 6 },
|
|
{ 4, 5 }, { 14, 15 }, { 9, 10 }, { 8, 9 },
|
|
{ 7, 8 } },
|
|
.mask = 0x0f,
|
|
};
|
|
|
|
/*
|
|
* Merriefield SDM MSR_FSB_FREQ frequencies simplified PLL model:
|
|
* 0001: 100 * 1 / 1 = 100.0000 MHz
|
|
* 0010: 100 * 4 / 3 = 133.3333 MHz
|
|
*/
|
|
static const struct freq_desc freq_desc_tng = {
|
|
.use_msr_plat = true,
|
|
.muldiv = { { 0, 0 }, { 1, 1 }, { 4, 3 } },
|
|
.mask = 0x07,
|
|
};
|
|
|
|
/*
|
|
* Moorefield SDM MSR_FSB_FREQ frequencies simplified PLL model:
|
|
* 0000: 100 * 5 / 6 = 83.3333 MHz
|
|
* 0001: 100 * 1 / 1 = 100.0000 MHz
|
|
* 0010: 100 * 4 / 3 = 133.3333 MHz
|
|
* 0011: 100 * 1 / 1 = 100.0000 MHz
|
|
*/
|
|
static const struct freq_desc freq_desc_ann = {
|
|
.use_msr_plat = true,
|
|
.muldiv = { { 5, 6 }, { 1, 1 }, { 4, 3 }, { 1, 1 } },
|
|
.mask = 0x0f,
|
|
};
|
|
|
|
/*
|
|
* 24 MHz crystal? : 24 * 13 / 4 = 78 MHz
|
|
* Frequency step for Lightning Mountain SoC is fixed to 78 MHz,
|
|
* so all the frequency entries are 78000.
|
|
*/
|
|
static const struct freq_desc freq_desc_lgm = {
|
|
.use_msr_plat = true,
|
|
.freqs = { 78000, 78000, 78000, 78000, 78000, 78000, 78000, 78000,
|
|
78000, 78000, 78000, 78000, 78000, 78000, 78000, 78000 },
|
|
.mask = 0x0f,
|
|
};
|
|
|
|
static const struct x86_cpu_id tsc_msr_cpu_ids[] = {
|
|
INTEL_CPU_FAM6(ATOM_SALTWELL_MID, freq_desc_pnw),
|
|
INTEL_CPU_FAM6(ATOM_SALTWELL_TABLET, freq_desc_clv),
|
|
INTEL_CPU_FAM6(ATOM_SILVERMONT, freq_desc_byt),
|
|
INTEL_CPU_FAM6(ATOM_SILVERMONT_MID, freq_desc_tng),
|
|
INTEL_CPU_FAM6(ATOM_AIRMONT, freq_desc_cht),
|
|
INTEL_CPU_FAM6(ATOM_AIRMONT_MID, freq_desc_ann),
|
|
INTEL_CPU_FAM6(ATOM_AIRMONT_NP, freq_desc_lgm),
|
|
{}
|
|
};
|
|
|
|
/*
|
|
* MSR-based CPU/TSC frequency discovery for certain CPUs.
|
|
*
|
|
* Set global "lapic_timer_period" to bus_clock_cycles/jiffy
|
|
* Return processor base frequency in KHz, or 0 on failure.
|
|
*/
|
|
unsigned long cpu_khz_from_msr(void)
|
|
{
|
|
u32 lo, hi, ratio, freq, tscref;
|
|
const struct freq_desc *freq_desc;
|
|
const struct x86_cpu_id *id;
|
|
const struct muldiv *md;
|
|
unsigned long res;
|
|
int index;
|
|
|
|
id = x86_match_cpu(tsc_msr_cpu_ids);
|
|
if (!id)
|
|
return 0;
|
|
|
|
freq_desc = (struct freq_desc *)id->driver_data;
|
|
if (freq_desc->use_msr_plat) {
|
|
rdmsr(MSR_PLATFORM_INFO, lo, hi);
|
|
ratio = (lo >> 8) & 0xff;
|
|
} else {
|
|
rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
|
|
ratio = (hi >> 8) & 0x1f;
|
|
}
|
|
|
|
/* Get FSB FREQ ID */
|
|
rdmsr(MSR_FSB_FREQ, lo, hi);
|
|
index = lo & freq_desc->mask;
|
|
md = &freq_desc->muldiv[index];
|
|
|
|
/*
|
|
* Note this also catches cases where the index points to an unpopulated
|
|
* part of muldiv, in that case the else will set freq and res to 0.
|
|
*/
|
|
if (md->divider) {
|
|
tscref = TSC_REFERENCE_KHZ * md->multiplier;
|
|
freq = DIV_ROUND_CLOSEST(tscref, md->divider);
|
|
/*
|
|
* Multiplying by ratio before the division has better
|
|
* accuracy than just calculating freq * ratio.
|
|
*/
|
|
res = DIV_ROUND_CLOSEST(tscref * ratio, md->divider);
|
|
} else {
|
|
freq = freq_desc->freqs[index];
|
|
res = freq * ratio;
|
|
}
|
|
|
|
if (freq == 0)
|
|
pr_err("Error MSR_FSB_FREQ index %d is unknown\n", index);
|
|
|
|
#ifdef CONFIG_X86_LOCAL_APIC
|
|
lapic_timer_period = (freq * 1000) / HZ;
|
|
#endif
|
|
|
|
/*
|
|
* TSC frequency determined by MSR is always considered "known"
|
|
* because it is reported by HW.
|
|
* Another fact is that on MSR capable platforms, PIT/HPET is
|
|
* generally not available so calibration won't work at all.
|
|
*/
|
|
setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ);
|
|
|
|
/*
|
|
* Unfortunately there is no way for hardware to tell whether the
|
|
* TSC is reliable. We were told by silicon design team that TSC
|
|
* on Atom SoCs are always "reliable". TSC is also the only
|
|
* reliable clocksource on these SoCs (HPET is either not present
|
|
* or not functional) so mark TSC reliable which removes the
|
|
* requirement for a watchdog clocksource.
|
|
*/
|
|
setup_force_cpu_cap(X86_FEATURE_TSC_RELIABLE);
|
|
|
|
return res;
|
|
}
|