279 lines
7.1 KiB
C
279 lines
7.1 KiB
C
/*
|
|
* arch/arm/mach-orion5x/ls_hgl-setup.c
|
|
*
|
|
* Maintainer: Zhu Qingsen <zhuqs@cn.fujitsu.com>
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/mv643xx_eth.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/gpio_keys.h>
|
|
#include <linux/input.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/ata_platform.h>
|
|
#include <linux/gpio.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include "common.h"
|
|
#include "mpp.h"
|
|
#include "orion5x.h"
|
|
|
|
/*****************************************************************************
|
|
* Linkstation LS-HGL Info
|
|
****************************************************************************/
|
|
|
|
/*
|
|
* 256K NOR flash Device bus boot chip select
|
|
*/
|
|
|
|
#define LS_HGL_NOR_BOOT_BASE 0xf4000000
|
|
#define LS_HGL_NOR_BOOT_SIZE SZ_256K
|
|
|
|
/*****************************************************************************
|
|
* 256KB NOR Flash on BOOT Device
|
|
****************************************************************************/
|
|
|
|
static struct physmap_flash_data ls_hgl_nor_flash_data = {
|
|
.width = 1,
|
|
};
|
|
|
|
static struct resource ls_hgl_nor_flash_resource = {
|
|
.flags = IORESOURCE_MEM,
|
|
.start = LS_HGL_NOR_BOOT_BASE,
|
|
.end = LS_HGL_NOR_BOOT_BASE + LS_HGL_NOR_BOOT_SIZE - 1,
|
|
};
|
|
|
|
static struct platform_device ls_hgl_nor_flash = {
|
|
.name = "physmap-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &ls_hgl_nor_flash_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &ls_hgl_nor_flash_resource,
|
|
};
|
|
|
|
/*****************************************************************************
|
|
* Ethernet
|
|
****************************************************************************/
|
|
|
|
static struct mv643xx_eth_platform_data ls_hgl_eth_data = {
|
|
.phy_addr = 8,
|
|
};
|
|
|
|
/*****************************************************************************
|
|
* RTC 5C372a on I2C bus
|
|
****************************************************************************/
|
|
|
|
static struct i2c_board_info __initdata ls_hgl_i2c_rtc = {
|
|
I2C_BOARD_INFO("rs5c372a", 0x32),
|
|
};
|
|
|
|
/*****************************************************************************
|
|
* LEDs attached to GPIO
|
|
****************************************************************************/
|
|
|
|
#define LS_HGL_GPIO_LED_ALARM 2
|
|
#define LS_HGL_GPIO_LED_INFO 3
|
|
#define LS_HGL_GPIO_LED_FUNC 17
|
|
#define LS_HGL_GPIO_LED_PWR 0
|
|
|
|
|
|
static struct gpio_led ls_hgl_led_pins[] = {
|
|
{
|
|
.name = "alarm:red",
|
|
.gpio = LS_HGL_GPIO_LED_ALARM,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "info:amber",
|
|
.gpio = LS_HGL_GPIO_LED_INFO,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "func:blue:top",
|
|
.gpio = LS_HGL_GPIO_LED_FUNC,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "power:blue:bottom",
|
|
.gpio = LS_HGL_GPIO_LED_PWR,
|
|
},
|
|
};
|
|
|
|
static struct gpio_led_platform_data ls_hgl_led_data = {
|
|
.leds = ls_hgl_led_pins,
|
|
.num_leds = ARRAY_SIZE(ls_hgl_led_pins),
|
|
};
|
|
|
|
static struct platform_device ls_hgl_leds = {
|
|
.name = "leds-gpio",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &ls_hgl_led_data,
|
|
},
|
|
};
|
|
|
|
/****************************************************************************
|
|
* GPIO Attached Keys
|
|
****************************************************************************/
|
|
#define LS_HGL_GPIO_KEY_FUNC 15
|
|
#define LS_HGL_GPIO_KEY_POWER 8
|
|
#define LS_HGL_GPIO_KEY_AUTOPOWER 10
|
|
|
|
#define LS_HGL_SW_POWER 0x00
|
|
#define LS_HGL_SW_AUTOPOWER 0x01
|
|
|
|
static struct gpio_keys_button ls_hgl_buttons[] = {
|
|
{
|
|
.code = KEY_OPTION,
|
|
.gpio = LS_HGL_GPIO_KEY_FUNC,
|
|
.desc = "Function Button",
|
|
.active_low = 1,
|
|
}, {
|
|
.type = EV_SW,
|
|
.code = LS_HGL_SW_POWER,
|
|
.gpio = LS_HGL_GPIO_KEY_POWER,
|
|
.desc = "Power-on Switch",
|
|
.active_low = 1,
|
|
}, {
|
|
.type = EV_SW,
|
|
.code = LS_HGL_SW_AUTOPOWER,
|
|
.gpio = LS_HGL_GPIO_KEY_AUTOPOWER,
|
|
.desc = "Power-auto Switch",
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_platform_data ls_hgl_button_data = {
|
|
.buttons = ls_hgl_buttons,
|
|
.nbuttons = ARRAY_SIZE(ls_hgl_buttons),
|
|
};
|
|
|
|
static struct platform_device ls_hgl_button_device = {
|
|
.name = "gpio-keys",
|
|
.id = -1,
|
|
.num_resources = 0,
|
|
.dev = {
|
|
.platform_data = &ls_hgl_button_data,
|
|
},
|
|
};
|
|
|
|
|
|
/*****************************************************************************
|
|
* SATA
|
|
****************************************************************************/
|
|
static struct mv_sata_platform_data ls_hgl_sata_data = {
|
|
.n_ports = 2,
|
|
};
|
|
|
|
|
|
/*****************************************************************************
|
|
* Linkstation LS-HGL specific power off method: reboot
|
|
****************************************************************************/
|
|
/*
|
|
* On the Linkstation LS-HGL, the shutdown process is following:
|
|
* - Userland monitors key events until the power switch goes to off position
|
|
* - The board reboots
|
|
* - U-boot starts and goes into an idle mode waiting for the user
|
|
* to move the switch to ON position
|
|
*/
|
|
|
|
static void ls_hgl_power_off(void)
|
|
{
|
|
orion5x_restart(REBOOT_HARD, NULL);
|
|
}
|
|
|
|
|
|
/*****************************************************************************
|
|
* General Setup
|
|
****************************************************************************/
|
|
|
|
#define LS_HGL_GPIO_USB_POWER 9
|
|
#define LS_HGL_GPIO_AUTO_POWER 10
|
|
#define LS_HGL_GPIO_POWER 8
|
|
|
|
#define LS_HGL_GPIO_HDD_POWER 1
|
|
|
|
static unsigned int ls_hgl_mpp_modes[] __initdata = {
|
|
MPP0_GPIO, /* LED_PWR */
|
|
MPP1_GPIO, /* HDD_PWR */
|
|
MPP2_GPIO, /* LED_ALARM */
|
|
MPP3_GPIO, /* LED_INFO */
|
|
MPP4_UNUSED,
|
|
MPP5_UNUSED,
|
|
MPP6_GPIO, /* FAN_LCK */
|
|
MPP7_GPIO, /* INIT */
|
|
MPP8_GPIO, /* POWER */
|
|
MPP9_GPIO, /* USB_PWR */
|
|
MPP10_GPIO, /* AUTO_POWER */
|
|
MPP11_UNUSED, /* LED_ETH (dummy) */
|
|
MPP12_UNUSED,
|
|
MPP13_UNUSED,
|
|
MPP14_UNUSED,
|
|
MPP15_GPIO, /* FUNC */
|
|
MPP16_UNUSED,
|
|
MPP17_GPIO, /* LED_FUNC */
|
|
MPP18_UNUSED,
|
|
MPP19_UNUSED,
|
|
0,
|
|
};
|
|
|
|
static void __init ls_hgl_init(void)
|
|
{
|
|
/*
|
|
* Setup basic Orion functions. Need to be called early.
|
|
*/
|
|
orion5x_init();
|
|
|
|
orion5x_mpp_conf(ls_hgl_mpp_modes);
|
|
|
|
/*
|
|
* Configure peripherals.
|
|
*/
|
|
orion5x_ehci0_init();
|
|
orion5x_ehci1_init();
|
|
orion5x_eth_init(&ls_hgl_eth_data);
|
|
orion5x_i2c_init();
|
|
orion5x_sata_init(&ls_hgl_sata_data);
|
|
orion5x_uart0_init();
|
|
orion5x_xor_init();
|
|
|
|
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
|
|
ORION_MBUS_DEVBUS_BOOT_ATTR,
|
|
LS_HGL_NOR_BOOT_BASE,
|
|
LS_HGL_NOR_BOOT_SIZE);
|
|
platform_device_register(&ls_hgl_nor_flash);
|
|
|
|
platform_device_register(&ls_hgl_button_device);
|
|
|
|
platform_device_register(&ls_hgl_leds);
|
|
|
|
i2c_register_board_info(0, &ls_hgl_i2c_rtc, 1);
|
|
|
|
/* enable USB power */
|
|
gpio_set_value(LS_HGL_GPIO_USB_POWER, 1);
|
|
|
|
/* register power-off method */
|
|
pm_power_off = ls_hgl_power_off;
|
|
|
|
pr_info("%s: finished\n", __func__);
|
|
}
|
|
|
|
MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
|
|
/* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */
|
|
.atag_offset = 0x100,
|
|
.nr_irqs = ORION5X_NR_IRQS,
|
|
.init_machine = ls_hgl_init,
|
|
.map_io = orion5x_map_io,
|
|
.init_early = orion5x_init_early,
|
|
.init_irq = orion5x_init_irq,
|
|
.init_time = orion5x_timer_init,
|
|
.fixup = tag_fixup_mem32,
|
|
.restart = orion5x_restart,
|
|
MACHINE_END
|