191 lines
4.6 KiB
C
191 lines
4.6 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* linux/arch/arm/mach-mmp/pxa910.c
|
|
*
|
|
* Code specific to PXA910
|
|
*/
|
|
#include <linux/clk/mmp.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/list.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/irqchip/mmp.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <asm/hardware/cache-tauros2.h>
|
|
#include <asm/mach/time.h>
|
|
#include "addr-map.h"
|
|
#include "regs-apbc.h"
|
|
#include "cputype.h"
|
|
#include "irqs.h"
|
|
#include "mfp.h"
|
|
#include "devices.h"
|
|
#include "pm-pxa910.h"
|
|
#include "pxa910.h"
|
|
|
|
#include "common.h"
|
|
|
|
#define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000)
|
|
|
|
static struct mfp_addr_map pxa910_mfp_addr_map[] __initdata =
|
|
{
|
|
MFP_ADDR_X(GPIO0, GPIO54, 0xdc),
|
|
MFP_ADDR_X(GPIO67, GPIO98, 0x1b8),
|
|
MFP_ADDR_X(GPIO100, GPIO109, 0x238),
|
|
|
|
MFP_ADDR(GPIO123, 0xcc),
|
|
MFP_ADDR(GPIO124, 0xd0),
|
|
|
|
MFP_ADDR(DF_IO0, 0x40),
|
|
MFP_ADDR(DF_IO1, 0x3c),
|
|
MFP_ADDR(DF_IO2, 0x38),
|
|
MFP_ADDR(DF_IO3, 0x34),
|
|
MFP_ADDR(DF_IO4, 0x30),
|
|
MFP_ADDR(DF_IO5, 0x2c),
|
|
MFP_ADDR(DF_IO6, 0x28),
|
|
MFP_ADDR(DF_IO7, 0x24),
|
|
MFP_ADDR(DF_IO8, 0x20),
|
|
MFP_ADDR(DF_IO9, 0x1c),
|
|
MFP_ADDR(DF_IO10, 0x18),
|
|
MFP_ADDR(DF_IO11, 0x14),
|
|
MFP_ADDR(DF_IO12, 0x10),
|
|
MFP_ADDR(DF_IO13, 0xc),
|
|
MFP_ADDR(DF_IO14, 0x8),
|
|
MFP_ADDR(DF_IO15, 0x4),
|
|
|
|
MFP_ADDR(DF_nCS0_SM_nCS2, 0x44),
|
|
MFP_ADDR(DF_nCS1_SM_nCS3, 0x48),
|
|
MFP_ADDR(SM_nCS0, 0x4c),
|
|
MFP_ADDR(SM_nCS1, 0x50),
|
|
MFP_ADDR(DF_WEn, 0x54),
|
|
MFP_ADDR(DF_REn, 0x58),
|
|
MFP_ADDR(DF_CLE_SM_OEn, 0x5c),
|
|
MFP_ADDR(DF_ALE_SM_WEn, 0x60),
|
|
MFP_ADDR(SM_SCLK, 0x64),
|
|
MFP_ADDR(DF_RDY0, 0x68),
|
|
MFP_ADDR(SM_BE0, 0x6c),
|
|
MFP_ADDR(SM_BE1, 0x70),
|
|
MFP_ADDR(SM_ADV, 0x74),
|
|
MFP_ADDR(DF_RDY1, 0x78),
|
|
MFP_ADDR(SM_ADVMUX, 0x7c),
|
|
MFP_ADDR(SM_RDY, 0x80),
|
|
|
|
MFP_ADDR_X(MMC1_DAT7, MMC1_WP, 0x84),
|
|
|
|
MFP_ADDR_END,
|
|
};
|
|
|
|
void __init pxa910_init_irq(void)
|
|
{
|
|
icu_init_irq();
|
|
#ifdef CONFIG_PM
|
|
icu_irq_chip.irq_set_wake = pxa910_set_wake;
|
|
#endif
|
|
}
|
|
|
|
static int __init pxa910_init(void)
|
|
{
|
|
if (cpu_is_pxa910()) {
|
|
#ifdef CONFIG_CACHE_TAUROS2
|
|
tauros2_init(0);
|
|
#endif
|
|
mfp_init_base(MFPR_VIRT_BASE);
|
|
mfp_init_addr(pxa910_mfp_addr_map);
|
|
pxa910_clk_init(APB_PHYS_BASE + 0x50000,
|
|
AXI_PHYS_BASE + 0x82800,
|
|
APB_PHYS_BASE + 0x15000,
|
|
APB_PHYS_BASE + 0x3b000);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
postcore_initcall(pxa910_init);
|
|
|
|
/* system timer - clock enabled, 3.25MHz */
|
|
#define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
|
|
#define APBC_TIMERS APBC_REG(0x34)
|
|
|
|
void __init pxa910_timer_init(void)
|
|
{
|
|
/* reset and configure */
|
|
__raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
|
|
__raw_writel(TIMER_CLK_RST, APBC_TIMERS);
|
|
|
|
mmp_timer_init(IRQ_PXA910_AP1_TIMER1, 3250000);
|
|
}
|
|
|
|
/* on-chip devices */
|
|
|
|
/* NOTE: there are totally 3 UARTs on PXA910:
|
|
*
|
|
* UART1 - Slow UART (can be used both by AP and CP)
|
|
* UART2/3 - Fast UART
|
|
*
|
|
* To be backward compatible with the legacy FFUART/BTUART/STUART sequence,
|
|
* they are re-ordered as:
|
|
*
|
|
* pxa910_device_uart1 - UART2 as FFUART
|
|
* pxa910_device_uart2 - UART3 as BTUART
|
|
*
|
|
* UART1 is not used by AP for the moment.
|
|
*/
|
|
PXA910_DEVICE(uart1, "pxa2xx-uart", 0, UART2, 0xd4017000, 0x30, 21, 22);
|
|
PXA910_DEVICE(uart2, "pxa2xx-uart", 1, UART3, 0xd4018000, 0x30, 23, 24);
|
|
PXA910_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
|
|
PXA910_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
|
|
PXA910_DEVICE(pwm1, "pxa910-pwm", 0, NONE, 0xd401a000, 0x10);
|
|
PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10);
|
|
PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
|
|
PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
|
|
PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
|
|
PXA910_DEVICE(disp, "mmp-disp", 0, LCD, 0xd420b000, 0x1ec);
|
|
PXA910_DEVICE(fb, "mmp-fb", -1, NONE, 0, 0);
|
|
PXA910_DEVICE(panel, "tpo-hvga", -1, NONE, 0, 0);
|
|
|
|
struct resource pxa910_resource_gpio[] = {
|
|
{
|
|
.start = 0xd4019000,
|
|
.end = 0xd4019fff,
|
|
.flags = IORESOURCE_MEM,
|
|
}, {
|
|
.start = IRQ_PXA910_AP_GPIO,
|
|
.end = IRQ_PXA910_AP_GPIO,
|
|
.name = "gpio_mux",
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
struct platform_device pxa910_device_gpio = {
|
|
.name = "mmp-gpio",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(pxa910_resource_gpio),
|
|
.resource = pxa910_resource_gpio,
|
|
};
|
|
|
|
static struct resource pxa910_resource_rtc[] = {
|
|
{
|
|
.start = 0xd4010000,
|
|
.end = 0xd401003f,
|
|
.flags = IORESOURCE_MEM,
|
|
}, {
|
|
.start = IRQ_PXA910_RTC_INT,
|
|
.end = IRQ_PXA910_RTC_INT,
|
|
.name = "rtc 1Hz",
|
|
.flags = IORESOURCE_IRQ,
|
|
}, {
|
|
.start = IRQ_PXA910_RTC_ALARM,
|
|
.end = IRQ_PXA910_RTC_ALARM,
|
|
.name = "rtc alarm",
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
struct platform_device pxa910_device_rtc = {
|
|
.name = "sa1100-rtc",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(pxa910_resource_rtc),
|
|
.resource = pxa910_resource_rtc,
|
|
};
|