OpenCloudOS-Kernel/arch/mips/configs/generic
Richard Weinberger 1c7cbd6347 NAND core changes:
- Support having the bad block markers in either the first, second or
   last page of a block. The combination of all three location is now
   possible.
 - Constification of NAND_OP_PARSER(_PATTERN) elements.
 - Generic NAND DT bindings changed to yaml format (can be used to
   check the proposed bindings. First platform to be fully supported:
   sunxi.
 - Stopped using several legacy hooks.
 - Preparation to use the generic NAND layer with the addition of
   several helpers and the removal of the struct nand_chip from generic
   functions.
 - Kconfig cleanup to prepare the introduction of external ECC engines
   support.
 - Fallthrough comments.
 - Introduction of the SPI-mem dirmap API for SPI-NAND devices.
 
 Raw NAND controller drivers changes:
 - nandsim:
   * Switch to ->exec-op().
 - meson:
   * Misc cleanups and fixes.
   * New OOB layout.
 - Sunxi:
   * A23/A33 NAND DMA support.
 - Ingenic:
   * Full reorganization and cleanup.
   * Clear separation between NAND controller and ECC engine.
   * Support JZ4740 an JZ4725B.
 - Denali:
   * Clear controller/chip separation.
   * ->exec_op() migration.
   * Various cleanups.
 - fsl_elbc:
   * Enable software ECC support.
 - Atmel:
   * Sam9x60 support.
 - GPMI:
   * Introduce the GPMI_IS_MXS() macro.
 - Various trivial/spelling/coding style fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAly4rnMACgkQJWrqGEe9
 VoSBzAgAmSx1rDxiX2033dhVvufCcqMQnkY1fguKo69lYkhgGI1EYwvq2NbGLCf4
 rb7n+D1peYhzH/9GKz4/LPQPccoVIQnx9+Z+JMZRzyQ+Z73cuomX/DtQO0AsRZgE
 bx88vsbQFtjWv0mVluIEs51e3B/4ya6KPotxUDcaAyp2s/VKPaEI1rpiteUx8lZC
 QsPsYQG/ryYiBW0cmopRL6c7ZdXyWi5A0kEdypGyO8ybTxo8xBquFqhbraDlM4U2
 2H3Ii3iV9HoVTyjG2nGIA094Ak0U029oWW+P9xAPf1L4z6WIVXD68sazpZng+t8s
 HgWP7BYDpcdRj+/Dm1b+uoaJH1fvOQ==
 =B7w9
 -----END PGP SIGNATURE-----

Merge tag 'nand/for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next

NAND core changes:
- Support having the bad block markers in either the first, second or
  last page of a block. The combination of all three location is now
  possible.
- Constification of NAND_OP_PARSER(_PATTERN) elements.
- Generic NAND DT bindings changed to yaml format (can be used to
  check the proposed bindings. First platform to be fully supported:
  sunxi.
- Stopped using several legacy hooks.
- Preparation to use the generic NAND layer with the addition of
  several helpers and the removal of the struct nand_chip from generic
  functions.
- Kconfig cleanup to prepare the introduction of external ECC engines
  support.
- Fallthrough comments.
- Introduction of the SPI-mem dirmap API for SPI-NAND devices.

Raw NAND controller drivers changes:
- nandsim:
  * Switch to ->exec-op().
- meson:
  * Misc cleanups and fixes.
  * New OOB layout.
- Sunxi:
  * A23/A33 NAND DMA support.
- Ingenic:
  * Full reorganization and cleanup.
  * Clear separation between NAND controller and ECC engine.
  * Support JZ4740 an JZ4725B.
- Denali:
  * Clear controller/chip separation.
  * ->exec_op() migration.
  * Various cleanups.
- fsl_elbc:
  * Enable software ECC support.
- Atmel:
  * Sam9x60 support.
- GPMI:
  * Introduce the GPMI_IS_MXS() macro.
- Various trivial/spelling/coding style fixes.
2019-05-05 11:54:11 +02:00
..
32r1.config MIPS: generic: Introduce generic DT-based board support 2016-10-06 18:04:04 +02:00
32r2.config MIPS: generic: Introduce generic DT-based board support 2016-10-06 18:04:04 +02:00
32r6.config MIPS: generic: Enable crc32-mips on r6 configs 2018-02-19 20:50:36 +00:00
64r1.config MIPS: generic: Introduce generic DT-based board support 2016-10-06 18:04:04 +02:00
64r2.config MIPS: generic: Introduce generic DT-based board support 2016-10-06 18:04:04 +02:00
64r6.config MIPS: generic: Enable crc32-mips on r6 configs 2018-02-19 20:50:36 +00:00
board-boston.config MIPS: generic: Support MIPS Boston development boards 2017-07-11 14:13:06 +02:00
board-ni169445.config mtd: rawnand: Clarify Kconfig entry MTD_NAND 2019-04-18 08:54:00 +02:00
board-ocelot.config NAND core changes: 2019-05-05 11:54:11 +02:00
board-ranchu.config MIPS: ranchu: Add Ranchu as a new generic-based board 2018-01-22 20:47:34 +00:00
board-sead-3.config MIPS: SEAD-3: Only include in 32 bit kernels by default 2017-08-30 00:57:28 +02:00
board-xilfpga.config MIPS: generic: Add support for MIPSfpga 2017-11-08 22:53:44 +00:00
eb.config MIPS: generic: Introduce generic DT-based board support 2016-10-06 18:04:04 +02:00
el.config MIPS: generic: Introduce generic DT-based board support 2016-10-06 18:04:04 +02:00
micro32r2.config MIPS: generic: Introduce generic DT-based board support 2016-10-06 18:04:04 +02:00