Commit Graph

933794 Commits

Author SHA1 Message Date
David S. Miller b08866f42a Merge branch 'net-atlantic-various-non-functional-changes'
Igor Russkikh says:

====================
net: atlantic: various non-functional changes

This patchset contains several non-functional changes, which were made in
out of tree driver over the time.
Mostly typos, checkpatch findings and comment fixes.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 16:32:51 -07:00
Igor Russkikh 4378b882bf net: atlantic: put ptp code under IS_REACHABLE check
A1 requires additional processing for both egress and ingress to support
PTP.
And it makes sense to get rid of this processing altogether (via ifdef),
if PTP clock is disabled globally.

This patch puts the PTP code under the corresponding IS_REACHABLE check.

Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 16:32:51 -07:00
Mark Starovoytov 8664240e30 net: atlantic: add alignment checks in hw_atl2_utils_fw.c
This patch adds alignment checks in all the helper macros in
hw_atl2_utils_fw.c
These alignment checks are compile-time, so runtime is not affected.

All these helper macros assume the length to be aligned (multiple of 4).
If it's not aligned, then there might be issues, e.g. stack corruption.

Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 16:32:51 -07:00
Dmitry Bezrukov 6ec99221d7 net: atlantic: missing space in a comment in aq_nic.h
This patch add a missing space in the comment in aq_nic.h

Signed-off-by: Dmitry Bezrukov <dbezrukov@marvell.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 16:32:50 -07:00
Mark Starovoytov 586616cbd4 net: atlantic: fix typo in aq_ring_tx_clean
This patch fixes a typo in aq_ring_tx_clean.
stats is a union, so the typo doesn't cause any issues, but it's a typo
nonetheless.

Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 16:32:50 -07:00
Mark Starovoytov ab3518acac net: atlantic: make aq_pci_func_init static
This patch makes aq_pci_func_init() static, because it's not used anywhere
outside the file itself.

Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 16:32:50 -07:00
Mark Starovoytov e35df21865 net: atlantic: Replace ENOTSUPP usage to EOPNOTSUPP
This patch replaces ENOTSUPP (where it was used by mistake) with
EOPNOTSUPP.

Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 16:32:50 -07:00
Nikita Danilov e39b8ffeb9 net: atlantic: fix variable type in aq_ethtool_get_pauseparam
This patch fixes the type for variable which is assigned from enum,
as such it should have been int, not u32.

Signed-off-by: Nikita Danilov <ndanilov@marvell.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 16:32:50 -07:00
Mark Starovoytov 3a8b445469 net: atlantic: MACSec offload statistics checkpatch fix
This patch fixes a checkpatch warning.

Fixes: aec0f1aac5 ("net: atlantic: MACSec offload statistics implementation")

Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 16:32:50 -07:00
David S. Miller e562d0868e Merge branch 'mptcp-refactor-token-container'
Paolo Abeni says:

====================
mptcp: refactor token container

Currently the msk sockets are stored in a single radix tree, protected by a
global spin_lock. This series moves to an hash table, allocated at boot time,
with per bucker spin_lock - alike inet_hashtables, but using a different key:
the token itself.

The above improves scalability, as write operations will have a far later chance
to compete for lock acquisition, allows lockless lookup, and will allow
easier msk traversing - e.g. for diag interface implementation's sake.

This also introduces trivial, related, kunit tests and move the existing in
kernel's one to kunit.

v1 -> v2:
 - fixed a few extra and sparse warns
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 16:21:39 -07:00
Paolo Abeni a8ee9c9b58 mptcp: introduce token KUNIT self-tests
Unit tests for the internal MPTCP token APIs, using KUNIT

v1 -> v2:
 - use the correct RCU annotation when initializing icsk ulp
 - fix a few checkpatch issues

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 16:21:39 -07:00
Paolo Abeni a00a582203 mptcp: move crypto test to KUNIT
currently MPTCP uses a custom hook to executed unit tests at
boot time. Let's use the KUNIT framework instead.
Additionally move the relevant code to a separate file and
export the function needed by the test when self-tests
are build as a module.

Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 16:21:39 -07:00
Paolo Abeni 2c5ebd001d mptcp: refactor token container
Replace the radix tree with a hash table allocated
at boot time. The radix tree has some shortcoming:
a single lock is contented by all the mptcp operation,
the lookup currently use such lock, and traversing
all the items would require a lock, too.

With hash table instead we trade a little memory to
address all the above - a per bucket lock is used.

To hash the MPTCP sockets, we re-use the msk' sk_node
entry: the MPTCP sockets are never hashed by the stack.
Replace the existing hash proto callbacks with a dummy
implementation, annotating the above constraint.

Additionally refactor the token creation to code to:

- limit the number of consecutive attempts to a fixed
maximum. Hitting a hash bucket with a long chain is
considered a failed attempt

- accept() no longer can fail to token management.

- if token creation fails at connect() time, we do
fallback to TCP (before the connection was closed)

v1 -> v2:
 - fix "no newline at end of file" - Jakub

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 16:21:39 -07:00
Paolo Abeni d39dceca38 mptcp: add __init annotation on setup functions
Add the missing annotation in some setup-only
functions.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 16:21:39 -07:00
David S. Miller be7aa9facb Merge branch 'net-organize-driver-docs-by-device-type'
Jakub Kicinski says:

====================
net: organize driver docs by device type

This series finishes off what I started in
commit b255e500c8 ("net: documentation: build a directory structure for drivers").
The objective is to de-clutter our documentation folder so folks
have a chance of finding relevant info. I _think_ I got all the
driver docs from the main documentation directory this time around.

While doing this I realized that many of them are of limited relevance
these days, so I went ahead and sliced the drivers directory by
technology. Those feeling nostalgic are free to dive into the FDDI,
ATM etc. docs, but for most Ethernet is what we care about.

v1:
 - simplify Intel's docs list in MAINTAINERS.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 16:08:45 -07:00
Jakub Kicinski 55f35cf79d docs: networking: move FDDI drivers to the hw driver section
Move docs for defza and skfp under device_drivers/fddi.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 16:08:45 -07:00
Jakub Kicinski 9633a0e959 docs: networking: move ATM drivers to the hw driver section
Move docs for cxacru, fore200e and iphase under device_drivers/atm.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 16:08:45 -07:00
Jakub Kicinski 4daedf7abb docs: networking: move AppleTalk / LocalTalk drivers to the hw driver section
Move docs for cops and ltpc under device_drivers/appletalk.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 16:08:45 -07:00
Jakub Kicinski 95298d63c6 docs: networking: move remaining Ethernet driver docs to the hw section
Move docs for hinic and altera_tse under device_drivers/ethernet.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 16:08:45 -07:00
Jakub Kicinski 5c3b5da432 docs: networking: move ray_cs to the hw driver section
Move ray_cs into Wi-Fi driver docs subdirectory.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 16:08:44 -07:00
Jakub Kicinski f05c43e056 docs: networking: move baycom to the hw driver section
Move baycom to hamradio.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 16:08:44 -07:00
Jakub Kicinski 1447495025 docs: networking: move z8530 to the hw driver section
Move z8530 docs to hamradio and wan subdirectories.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 16:08:44 -07:00
Jakub Kicinski 132db93572 docs: networking: reorganize driver documentation again
Organize driver documentation by device type. Most documents
have fairly verbose yet uninformative names, so let users
first select a well defined device type, and then search for
a particular driver.

While at it rename the section from Vendor drivers to
Hardware drivers. This seems more accurate, besides people
sometimes refer to out-of-tree drivers as vendor drivers.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 16:08:44 -07:00
David S. Miller ab696fa70f Merge branch 'net-phy-relax-PHY-and-MDIO-reset-handling'
Bartosz Golaszewski says:

====================
net: phy: relax PHY and MDIO reset handling

Previously these patches were submitted as part of a larger series[1]
but since the approach in it will have to be reworked I'm resending
the ones that were non-controversial and have been reviewed for upstream.

Florian suggested a better solution for managing multiple resets. While
I will definitely try to implement something at the driver model's bus
level (together with regulator support), the 'resets' and 'reset-gpios'
DT property is a stable ABI defined in mdio.yaml so improving its support
is in order as we'll have to stick with it anyway. Current implementation
contains an unnecessary limitation where drivers without probe() can't
define resets.

Changes from the previous version:
- order forward declarations in patch 4 alphabetically
- collect review tags

[1] https://lkml.org/lkml/2020/6/22/253
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 13:40:18 -07:00
Bartosz Golaszewski 96e263592b net: phy: mdio: reset MDIO devices even if probe() is not implemented
Similarily to PHY drivers - there's no reason to require probe() to be
implemented in order to call mdio_device_reset(). MDIO devices can have
resets defined without needing to do anything in probe().

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 13:40:09 -07:00
Bartosz Golaszewski 1dba699573 net: phy: reset the PHY even if probe() is not implemented
Currently we only call phy_device_reset() if the PHY driver implements
the probe() callback. This is not mandatory and many drivers (e.g.
realtek) don't need probe() for most devices but still can have reset
GPIOs defined. There's no reason to depend on the presence of probe()
here so pull the reset code out of the if clause.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 13:40:09 -07:00
Bartosz Golaszewski 333740981f net: mdio: add a forward declaration for reset_control to mdio.h
This header refers to struct reset_control but doesn't include any reset
header. The structure definition is probably somehow indirectly pulled in
since no warnings are reported but for the sake of correctness add the
forward declaration for struct reset_control.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 13:40:09 -07:00
Bartosz Golaszewski e42bcd0f7e net: phy: arrange headers in phy_device.c alphabetically
Keeping the headers in alphabetical order is better for readability and
allows to easily see if given header is already included.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 13:40:09 -07:00
Bartosz Golaszewski 1d0018a430 net: phy: arrange headers in mdio_device.c alphabetically
Keeping the headers in alphabetical order is better for readability and
allows to easily see if given header is already included.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 13:38:16 -07:00
Bartosz Golaszewski 54e80ded36 net: phy: arrange headers in mdio_bus.c alphabetically
Keeping the headers in alphabetical order is better for readability and
allows to easily see if given header is already included.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 13:38:16 -07:00
Daniel González Cabanelas 61b5cc20c8 net: mvneta: speed down the PHY, if WoL used, to save energy
Some PHYs connected to this ethernet hardware support the WoL feature.
But when WoL is enabled and the machine is powered off, the PHY remains
waiting for a magic packet at max speed (i.e. 1Gbps), which is a waste of
energy.

Slow down the PHY speed before stopping the ethernet if WoL is enabled,
and save some energy while the machine is powered off or sleeping.

Tested using an Armada 370 based board (LS421DE) equipped with a Marvell
88E1518 PHY.

Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 13:36:33 -07:00
David S. Miller b0f46a9754 Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2020-06-25

This series contains updates to i40e driver and removes the individual
driver versions from all of the Intel wired LAN drivers.

Shiraz moves the client header so that it can easily be shared between
the i40e LAN driver and i40iw RDMA driver.

Jesse cleans up the unused defines, since they are just dead weight.

Alek reduces the unreasonably long wait time for a PF reset after reboot
by using jiffies to limit the maximum wait time for the PF reset to
succeed.  Added additional logging to let the user know when the driver
transitions into recovery mode.  Adds new device support for our 5 Gbps
NICs.

Todd adds a check to see if MFS is set after warm reboot and notifies
the user when MFS is set to anything lower than the default value.

Arkadiusz fixes a possible race condition, where were holding a
spin-lock while in atomic context.

v2: removed code comments that were no longer applicable in patch 2 of
    the series.  Also removed 'inline' from patch 4 and patch 8 of the
    series.  Also re-arranged code to be able to remove the forward
    function declarations.  Dropped patch 9 of the series, while the
    author works on cleaning up the commit message.
v3: Updated patch 8 description to answer Jakub's questions
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 12:22:34 -07:00
Nathan Chancellor 18c955b730 bonding: Remove extraneous parentheses in bond_setup
Clang warns:

drivers/net/bonding/bond_main.c:4657:23: warning: equality comparison
with extraneous parentheses [-Wparentheses-equality]
        if ((BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP))
             ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~

drivers/net/bonding/bond_main.c:4681:23: warning: equality comparison
with extraneous parentheses [-Wparentheses-equality]
        if ((BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP))
             ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~

This warning occurs when a comparision has two sets of parentheses,
which is usually the convention for doing an assignment within an
if statement. Since equality comparisons do not need a second set of
parentheses, remove them to fix the warning.

Fixes: 18cb261afd ("bonding: support hardware encryption offload to slaves")
Link: https://github.com/ClangBuiltLinux/linux/issues/1066
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: kernelci.org bot <bot@kernelci.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 12:18:40 -07:00
Martin Blumenstingl 52660c0ec9 net: stmmac: dwmac-meson8b: use clk_parent_data for clock registration
Simplify meson8b_init_rgmii_tx_clk() by using struct clk_parent_data to
initialize the clock parents. No functional changes intended.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 12:17:29 -07:00
Vaibhav Gupta 4ced637bd2 bnx2x: use generic power management
With legacy PM, drivers themselves were responsible for managing the
device's power states and takes care of register states.

After upgrading to the generic structure, PCI core will take care of
required tasks and drivers should do only device-specific operations.

The driver was also calling bnx2x_set_power_state() to set the power state
of the device by changing the device's registers' value. It is no more
needed.

Compile-tested only.

Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Acked-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 12:14:09 -07:00
Linus Lüssing 3bda14d09d batman-adv: Introduce a configurable per interface hop penalty
In some setups multiple hard interfaces with similar link qualities
or throughput values are available. But people have expressed the desire
to consider one of them as a backup only.

Some creative solutions are currently in use: Such people are
configuring multiple batman-adv mesh/soft interfaces, wire them
together with some veth pairs and then tune the hop penalty to achieve
an effect similar to a tunable per interface hop penalty.

This patch introduces a new, configurable, per hard interface hop penalty
to simplify such setups.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-06-26 10:37:11 +02:00
Sven Eckelmann bccb48c89f batman-adv: Fix typos and grammar in documentation
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-06-26 10:36:30 +02:00
Sven Eckelmann 4dd5066a38 batman-adv: Switch mailing list subscription page
The mailman installation on lists.open-mesh.org was switched from mailman2
to mailman3. The URL to the subscription webpage changed in this process.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-06-26 10:35:30 +02:00
Simon Wunderlich d528510e6d batman-adv: Start new development cycle
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-06-26 10:35:06 +02:00
Aleksandr Loktionov 37d318d780 i40e: Remove scheduling while atomic possibility
In some occasions task held spinlock (mac_filter_hash_lock),
while being rescheduled due to admin queue mutex_lock.  The struct
i40e_spinlock asq_spinlock, which later expands to struct mutex
spinlock.  Moved i40e_aq_set_vsi_multicast_promiscuous(),
i40e_aq_set_vsi_unicast_promiscuous(),
i40e_aq_set_vsi_mc_promisc_on_vlan(), and
i40e_aq_set_vsi_uc_promisc_on_vlan() outside of atomic context.  Without
this patch there is a race condition, which might result in scheduling
while in atomic context.  The race condition is between the thread, which
holds mac_filter_hash_lock, while trying to acquire an admin queue mutex
and a thread, which already has said admin queue mutex. The thread, which
holds spinlock, fails to acquire the mutex, which causes this thread to
sleep.

Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-25 22:37:03 -07:00
Aleksandr Loktionov 3dbdd6c2f7 i40e: Add support for 5Gbps cards
Make possible for the i40e driver to bind to the new v710 for 5GBASE-T
NICs.

Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-25 22:25:13 -07:00
Jeff Kirsher 34a2a3b83e net/intel: remove driver versions from Intel drivers
As with other networking drivers, remove the unnecessary driver version
from the Intel drivers. The ethtool driver information and module version
will then report the kernel version instead.

For ixgbe, i40e and ice drivers, the driver passes the driver version to
the firmware to confirm that we are up and running.  So we now pass the
value of UTS_RELEASE to the firmware.  This adminq call is required per
the HAS document.  The Device then sends an indication to the BMC that the
PF driver is present. This is done using Host NC Driver Status Indication
in NC-SI Get Link command or via the Host Network Controller Driver Status
Change AEN.

What the BMC may do with this information is implementation-dependent, but
this is a standard NC-SI 1.1 command we honor per the HAS.

CC: Bruce Allan <bruce.w.allan@intel.com>
CC: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Alek Loktionov <aleksandr.loktionov@intel.com>
CC: Kevin Liedtke <kevin.d.liedtke@intel.com>
CC: Aaron Rowden <aaron.f.rowden@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Co-developed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
2020-06-25 22:25:13 -07:00
Todd Fujinaka 3a2c6ced90 i40e: Add a check to see if MFS is set
A customer was chain-booting to provision his systems and one of the
steps was setting MFS. MFS isn't cleared by normal warm reboots
(clearing requires a GLOBR) and there was no indication of why Jumbo
Frame receives were failing.

Add a warning if MFS is set to anything lower than the default.

Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-25 22:25:13 -07:00
Piotr Kwapulinski fffeeddfcf i40e: detect and log info about pre-recovery mode
Detect and log information about pre-recovery mode when firmware
transitions to a recovery mode.
When a firmware transitions to a recovery mode it stores a number
of unexpected EMP resets in one of its registers. The number of EMP
resets ranging from 0x21 to 0x2A indicates that FW transitions
to recovery mode. Use these values to emit log entry about transition
process. Previously the pre-recovery mode may not have been detected
and there was no log entry when NIC was in pre-recovery mode.

Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-25 22:25:13 -07:00
Piotr Kwapulinski 91c534b5e3 i40e: make PF wait reset loop reliable
Use jiffies to limit max waiting time for PF reset to succeed.
Previous wait loop was unreliable. It required unreasonably long time
to wait for PF reset after reboot when NIC was about to enter
recovery mode

Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-25 22:25:13 -07:00
Jesse Brandeburg 3c98f9ee6b i40e: remove unused defines
Remove all the unused defines as they are just dead weight.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-25 22:25:13 -07:00
Shiraz Saleem fe21b6c3a6 i40e: Move client header location
Move i40e_client.h to include/linux/net/intel/*
since its shared between i40iw and i40e.

Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-25 22:25:13 -07:00
David S. Miller 7bed145516 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Minor overlapping changes in xfrm_device.c, between the double
ESP trailing bug fix setting the XFRM_INIT flag and the changes
in net-next preparing for bonding encryption support.

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-25 19:29:51 -07:00
Linus Torvalds 4a21185cda Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:

 1) Don't insert ESP trailer twice in IPSEC code, from Huy Nguyen.

 2) The default crypto algorithm selection in Kconfig for IPSEC is out
    of touch with modern reality, fix this up. From Eric Biggers.

 3) bpftool is missing an entry for BPF_MAP_TYPE_RINGBUF, from Andrii
    Nakryiko.

 4) Missing init of ->frame_sz in xdp_convert_zc_to_xdp_frame(), from
    Hangbin Liu.

 5) Adjust packet alignment handling in ax88179_178a driver to match
    what the hardware actually does. From Jeremy Kerr.

 6) register_netdevice can leak in the case one of the notifiers fail,
    from Yang Yingliang.

 7) Use after free in ip_tunnel_lookup(), from Taehee Yoo.

 8) VLAN checks in sja1105 DSA driver need adjustments, from Vladimir
    Oltean.

 9) tg3 driver can sleep forever when we get enough EEH errors, fix from
    David Christensen.

10) Missing {READ,WRITE}_ONCE() annotations in various Intel ethernet
    drivers, from Ciara Loftus.

11) Fix scanning loop break condition in of_mdiobus_register(), from
    Florian Fainelli.

12) MTU limit is incorrect in ibmveth driver, from Thomas Falcon.

13) Endianness fix in mlxsw, from Ido Schimmel.

14) Use after free in smsc95xx usbnet driver, from Tuomas Tynkkynen.

15) Missing bridge mrp configuration validation, from Horatiu Vultur.

16) Fix circular netns references in wireguard, from Jason A. Donenfeld.

17) PTP initialization on recovery is not done properly in qed driver,
    from Alexander Lobakin.

18) Endian conversion of L4 ports in filters of cxgb4 driver is wrong,
    from Rahul Lakkireddy.

19) Don't clear bound device TX queue of socket prematurely otherwise we
    get problems with ktls hw offloading, from Tariq Toukan.

20) ipset can do atomics on unaligned memory, fix from Russell King.

21) Align ethernet addresses properly in bridging code, from Thomas
    Martitz.

22) Don't advertise ipv4 addresses on SCTP sockets having ipv6only set,
    from Marcelo Ricardo Leitner.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (149 commits)
  rds: transport module should be auto loaded when transport is set
  sch_cake: fix a few style nits
  sch_cake: don't call diffserv parsing code when it is not needed
  sch_cake: don't try to reallocate or unshare skb unconditionally
  ethtool: fix error handling in linkstate_prepare_data()
  wil6210: account for napi_gro_receive never returning GRO_DROP
  hns: do not cast return value of napi_gro_receive to null
  socionext: account for napi_gro_receive never returning GRO_DROP
  wireguard: receive: account for napi_gro_receive never returning GRO_DROP
  vxlan: fix last fdb index during dump of fdb with nhid
  sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket
  tc-testing: avoid action cookies with odd length.
  bpf: tcp: bpf_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
  tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
  net: dsa: sja1105: fix tc-gate schedule with single element
  net: dsa: sja1105: recalculate gating subschedule after deleting tc-gate rules
  net: dsa: sja1105: unconditionally free old gating config
  net: dsa: sja1105: move sja1105_compose_gating_subschedule at the top
  net: macb: free resources on failure path of at91ether_open()
  net: macb: call pm_runtime_put_sync on failure path
  ...
2020-06-25 18:27:40 -07:00
Kevin Darbyshire-Bryant b8392808eb sch_cake: add RFC 8622 LE PHB support to CAKE diffserv handling
Change tin mapping on diffserv3, 4 & 8 for LE PHB support, in essence
making LE a member of the Bulk tin.

Bulk has the least priority and minimum of 1/16th total bandwidth in the
face of higher priority traffic.

NB: Diffserv 3 & 4 swap tin 0 & 1 priorities from the default order as
found in diffserv8, in case anyone is wondering why it looks a bit odd.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
[ reword commit message slightly ]
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-25 16:31:35 -07:00