Currently, DPU will enable TE during prepare_commit(). However, this
will cause a crash and reboot to sahara when trying to read/write to
register in get_autorefresh_config(), because the core clock rates
aren't set at that time.
This used to work because phys_enc->hw_pp is only initialized in mode
set [1], so the first prepare_commit() will return before any register
read/write as hw_pp would be NULL.
However, when we try to implement support for INTF TE, we will run into
the clock issue described above as hw_intf will *not* be NULL on the
first prepare_commit(). This is because the initialization of
dpu_enc->hw_intf has been moved to dpu_encoder_setup() [2].
To avoid this issue, let's enable TE during prepare_for_kickoff()
instead as the core clock rates are guaranteed to be set then.
Depends on: "Implement tearcheck support on INTF block" [3]
Changes in V3:
- Added function prototypes
- Reordered function definitions to make change more legible
- Removed prepare_commit() function from dpu_encoder_phys_cmd
Changes in V4:
- Reworded commit message to be more specific
- Removed dpu_encoder_phys_cmd_is_ongoing_pptx() prototype
[1] https://gitlab.freedesktop.org/drm/msm/-/blob/msm-next/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c#L1109
[2] https://gitlab.freedesktop.org/drm/msm/-/blob/msm-next/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c#L2339
[3] https://patchwork.freedesktop.org/series/112332/
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/523602/
Link: https://lore.kernel.org/r/20230221184256.1436-2-quic_jesszhan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Move code from ad-hoc fbdev callbacks into DRM client functions
and remove the old callbacks. The functions instruct the client
to poll for changed output or restore the display. The DRM core
calls both, the old callbacks and the new client helpers, from
the same places. The new functions perform the same operation as
before, so there's no change in functionality.
Replace all code that initializes or releases fbdev emulation
throughout the driver. Instead initialize the fbdev client by a
single call to msm_fbdev_setup() after msm has registered its
DRM device. As in most drivers, msm's fbdev emulation now acts
like a regular DRM client.
The fbdev client setup consists of the initial preparation and the
hot-plugging of the display. The latter creates the fbdev device
and sets up the fbdev framebuffer. The setup performs display
hot-plugging once. If no display can be detected, DRM probe helpers
re-run the detection on each hotplug event.
A call to drm_dev_unregister() releases the client automatically.
No further action is required within msm. If the fbdev framebuffer
has been fully set up, struct fb_ops.fb_destroy implements the
release. For partially initialized emulation, the fbdev client
reverts the initial setup.
v2:
* handle fbdev module parameter correctly (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # RB5
Patchwork: https://patchwork.freedesktop.org/patch/530560/
Link: https://lore.kernel.org/r/20230403124538.8497-9-tzimmermann@suse.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Initialize the fbdev client in the fbdev code with empty helper
functions. Also clean up the client. The helpers will later
implement various functionality of the DRM client. No functional
changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/530557/
Link: https://lore.kernel.org/r/20230403124538.8497-8-tzimmermann@suse.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Define the module's parameter 'fbdev' in fbdev code. No other code
uses it. No functional changes, but simplifies the later conversion
to struct drm_client.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/530555/
Link: https://lore.kernel.org/r/20230403124538.8497-7-tzimmermann@suse.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The DRM device stores a pointer to the fbdev helper. Remove struct
msm_drm_private.fbdev, which contains the same value. No functional
changes.
v2:
* test for fb_helper->fb in debugfs code
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/530559/
Link: https://lore.kernel.org/r/20230403124538.8497-6-tzimmermann@suse.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Remove struct msm_fbdev, which is an empty wrapper around struct
drm_fb_helper. Use the latter directly. No functional changes.
v2:
* kfree fbdev helper instance on init errors (Dmitri)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/530554/
Link: https://lore.kernel.org/r/20230403124538.8497-5-tzimmermann@suse.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Move aperture management out of the fbdev code. It is unrelated
and needs to run even if fbdev support has been disabled. Call
the helper at the top of msm_drm_init() to take over hardware
from other drivers.
v2:
* bind all subdevices before acquiring device (Dmitri)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/530553/
Link: https://lore.kernel.org/r/20230403124538.8497-3-tzimmermann@suse.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
If userspace asked for a timeout greater than zero, but less than a
jiffy, they clearly weren't planning on spinning. So it is better
to round up to one.
This fixes an issue with supertuxkart that was (for some reason)
spinning on a gl sync with 1ms timeout. CPU time for a demo lap
drops from:
15.83user 20.98system 0:47.46elapsed 77%CPU
drops to:
8.84user 2.30system 0:46.67elapsed 23%CPU
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/528725/
Link: https://lore.kernel.org/r/20230324220013.191795-1-robdclark@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Make sure to destroy the workqueue also in case of early errors during
bind (e.g. a subcomponent failing to bind).
Since commit c3b790ea07 ("drm: Manage drm_mode_config_init with
drmm_") the mode config will be freed when the drm device is released
also when using the legacy interface, but add an explicit cleanup for
consistency and to facilitate backporting.
Fixes: 060530f1ea ("drm/msm: use componentised device support")
Cc: stable@vger.kernel.org # 3.15
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525093/
Link: https://lore.kernel.org/r/20230306100722.28485-9-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In case of early initialisation errors and on platforms that do not use
the DPU controller, the deinitilisation code can be called with the kms
pointer set to NULL.
Fixes: f026e431cf ("drm/msm: Convert to Linux IRQ interfaces")
Cc: stable@vger.kernel.org # 5.14
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525104/
Link: https://lore.kernel.org/r/20230306100722.28485-5-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In case of early initialisation errors and on platforms that do not use
the DPU controller, the deinitilisation code can be called with the kms
pointer set to NULL.
Fixes: 98659487b8 ("drm/msm: add support to take dpu snapshot")
Cc: stable@vger.kernel.org # 5.14
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525099/
Link: https://lore.kernel.org/r/20230306100722.28485-4-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
This reverts commit 8636500300.
A recent commit tried to address a drm device leak in the early
msm_drm_uninit() error paths but ended up making things worse.
Specifically, it moved the drm device reference put in msm_drm_uninit()
to msm_drm_init() which means that the drm would now be leaked on normal
unbind.
For reasons that were never spelled out, it also added kms NULL pointer
checks to a couple of helper functions that had nothing to do with the
paths modified by the patch.
Instead of trying to salvage this incrementally, let's revert the bad
commit so that clean and backportable fixes can be added in its place.
Fixes: 8636500300 ("drm/msm: Fix failure paths in msm_drm_init()")
Cc: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525092/
Link: https://lore.kernel.org/r/20230306100722.28485-3-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
This reverts commit 643b7d0869.
A recent patch that tried to fix up the msm_drm_init() paths with
respect to the workqueue but only ended up making things worse:
First, the newly added calls to msm_drm_uninit() on early errors would
trigger NULL-pointer dereferences, for example, as the kms pointer would
not have been initialised. (Note that these paths were also modified by
a second broken error handling patch which in effect cancelled out this
part when merged.)
Second, the newly added allocation sanity check would still leak the
previously allocated drm device.
Instead of trying to salvage what was badly broken (and clearly not
tested), let's revert the bad commit so that clean and backportable
fixes can be added in its place.
Fixes: 643b7d0869 ("drm/msm: Add missing check and destroy for alloc_ordered_workqueue")
Cc: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525107/
Link: https://lore.kernel.org/r/20230306100722.28485-2-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
- i915.enable_sagv module parameter (Ville)
- Correction to QGV related register addresses (Vinod)
- IPS debugfs per-crtc and new file for false_color (Ville)
- More clean-up and reorganization of Display code (Jani)
- DP DSC related fixes and improvements (Stanislav, Ankit, Suraj, Swati)
- Make utility pin asserts more accurate (Ville)
- Meteor Lake enabling (Daniele)
- High refresh rate PSR fixes (Jouni)
- Cursor and Plane chicken register fixes (Ville)
- Align the ADL-P TypeC sequences with hardware specification (Imre)
- Documentation build fixes and improvements to catch bugs earlier (Lee, Jani)
- PL1 power limit hwmon entry changed to use 0 as disabled state (Ashutosh)
- DP aux sync fix and improvements (Ville)
- DP MST fixes and w/a (Stanislav)
- Limit PXP drm-errors or warning on firmware API failures (Alan)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmQu0TIACgkQ+mJfZA7r
E8osJwf+Pi3tvP1gvum4aVM2IgjA9fF1ZTwwFDqVNwJ2Sfzb93E0XOetoqd0AsEa
z6XYKN5N6P+dA1zLdtV21cmmI3V0iC7UEoZVba98n6Euabh0+7sDcS6o9Y7wDLqJ
DsDL02Vb2OMNjHce+w2lvbiLU52pWh9hVpB47bqS/vjTE9Q+C0Y2PoReyTca6o63
wmOXd1LSNfmaXHfeTRwQdWD7XlHtVmZmH0vn3BSd1ikB0nT7BJIIdc96fody19DI
67CLhQANhesp5si9JIqTWdxSgEibxFP9xDqfx3FOGJfhxWuOPSTs8hk/OjXM3zjr
2uSOnqxZ4a+nrSXy6pG4R4PqvG6ljg==
=Yqy1
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2023-04-06' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Fix DPT+shmem combo and add i915.enable_dpt modparam (Ville)
- i915.enable_sagv module parameter (Ville)
- Correction to QGV related register addresses (Vinod)
- IPS debugfs per-crtc and new file for false_color (Ville)
- More clean-up and reorganization of Display code (Jani)
- DP DSC related fixes and improvements (Stanislav, Ankit, Suraj, Swati)
- Make utility pin asserts more accurate (Ville)
- Meteor Lake enabling (Daniele)
- High refresh rate PSR fixes (Jouni)
- Cursor and Plane chicken register fixes (Ville)
- Align the ADL-P TypeC sequences with hardware specification (Imre)
- Documentation build fixes and improvements to catch bugs earlier (Lee, Jani)
- PL1 power limit hwmon entry changed to use 0 as disabled state (Ashutosh)
- DP aux sync fix and improvements (Ville)
- DP MST fixes and w/a (Stanislav)
- Limit PXP drm-errors or warning on firmware API failures (Alan)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZC7RR3Laet8ywHRo@intel.com
The majority of this is minor cleanups and fixes. Other than those, this
contains Uwe's conversion to the new driver remove callback and Thomas'
fbdev DRM client conversion. The driver can now also be built on other
architectures to easy compile coverage.
Finally, this adds Mikko as a second maintainer for the driver. As a
next step we also want Tegra DRM to move into drm-misc to streamline the
maintenance process.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmQutt4THHRyZWRpbmdA
bnZpZGlhLmNvbQAKCRDdI6zXfz6zoWL4EACjWWL8F2r6h9ba6vD9Eh60WTkGl4Gl
kLonN2E4lWsPZFGYDnmK9sPEDpRsJw9/OfDcFgzwTgNSYL46pE9qKt2Qlq9IeuwY
/j3//LNMdchcU5sbe2nYbdKcbag1u22dP8V0Kcg1v+XB76sxjxuj+lTviEYL7eUf
Rj1RJME7XhEtThfbkIbiVntxvz3X3qyaLlcKkyr+jLMTF/jtBH9vB2UC91LhLoLy
cW6LfAH6fUwP9C+Qyr1BBMwM28pgrCOQwhGWe0npUjOyE6kpxgzNhxUlb8lPZh/+
8d5VLLVLZQ01cdFXsqslNSney+nQcXWABnRLtMN207rch6JQ7tHT52IfsyDdpVkt
UZh4+8njDgtw2NVIUh9vv7kj9Ib2uA0gDFhMLncFowhBU5AneOKYbKoO1rwiPQCe
nfg/qWXuJGu8QpWF5OAtagkSnF5L+bHq34azosZfo6dHKUjGAFpCKde5izs8DZs4
XU4XOmXqfR/+fB8CeBsgXtHPnXnxp4t9/VA6OXhFDfms5/bjuyZKsn4YVqHNHnVy
oERf0s3HkmEs4EhWWdqzyrD8ctuki/RsKcL2d93AWvOCtGi//6f8LI+x1a27h8oH
ZaT1bJT/b+qLTSIhzjqTXnmiuSmeLEfLcT4cT2F9MQa2U8JSN/j2jTfNQSabfCy1
P8NDNoX8HrwIJg==
=o2uv
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-6.4-rc1' of https://gitlab.freedesktop.org/drm/tegra into drm-next
drm/tegra: Changes for v6.4-rc1
The majority of this is minor cleanups and fixes. Other than those, this
contains Uwe's conversion to the new driver remove callback and Thomas'
fbdev DRM client conversion. The driver can now also be built on other
architectures to easy compile coverage.
Finally, this adds Mikko as a second maintainer for the driver. As a
next step we also want Tegra DRM to move into drm-misc to streamline the
maintenance process.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230406121404.967704-1-thierry.reding@gmail.com
Fix the warning:
drivers/gpu/drm/i915/intel_wakeref.h:118: warning: expecting prototype
for intel_wakeref_get_if_in_use(). Prototype was for
intel_wakeref_get_if_active() instead
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230405104142.766598-2-jani.nikula@intel.com
There's not much point in a static work function having a kernel-doc
comment. Just clean it up and make it a regular comment.
This fixes the kernel-doc warnings:
drivers/gpu/drm/i915/display/intel_tc.c:1370: warning: Function
parameter or member 'work' not described in
'intel_tc_port_disconnect_phy_work'
drivers/gpu/drm/i915/display/intel_tc.c:1370: warning: Excess function
parameter 'dig_port' description in 'intel_tc_port_disconnect_phy_work'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230405104142.766598-1-jani.nikula@intel.com
drm-misc-next for v6.4-rc1:
UAPI Changes:
Cross-subsystem Changes:
- Document port and rotation dt bindings better.
- For panel timing DT bindings, document that vsync and hsync are
first, rather than last in image.
- Fix video/aperture typos.
Core Changes:
- Reject prime DMA-Buf attachment if get_sg_table is missing.
(For self-importing dma-buf only.)
- Add prime import/export to vram-helper.
- Fix oops in drm/vblank when init is not called.
- Fixup xres/yres_virtual and other fixes in fb helper.
- Improve SCDC debugs.
- Skip setting deadline on modesets.
- Assorted TTM fixes.
Driver Changes:
- Add lima usage stats.
- Assorted fixes to bridge/lt8192b, tc358767, ivpu,
bridge/ti-sn65dsi83, ps8640.
- Use pci aperture helpers in drm/ast lynxfb, radeonfb.
- Revert some lima patches, as they required a commit that has been
reverted upstream.
- Add AUO NE135FBM-N41 v8.1 eDP panel.
- Add QAIC accel driver.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/64bb9696-a76a-89d9-1866-bcdf7c69c284@linux.intel.com
UAPI Changes:
- (Build-time only, should not have any impact)
drm/i915/uapi: Replace fake flex-array with flexible-array member
"Zero-length arrays as fake flexible arrays are deprecated and we are
moving towards adopting C99 flexible-array members instead."
This is on core kernel request moving towards GCC 13.
Driver Changes:
- Fix context runtime accounting on sysfs fdinfo for heavy workloads (Tvrtko)
- Add support for OA media units on MTL (Umesh)
- Add new workarounds for Meteorlake (Daniele, Radhakrishna, Haridhar)
- Fix sysfs to read actual frequency for MTL and Gen6 and earlier
(Ashutosh)
- Synchronize i915/BIOS on C6 enabling on MTL (Vinay)
- Fix DMAR error noise due to GPU error capture (Andrej)
- Fix forcewake during BAR resize on discrete (Andrzej)
- Flush lmem contents after construction on discrete (Chris)
- Fix GuC loading timeout on systems where IFWI programs low boot
frequency (John)
- Fix race condition UAF in i915_perf_add_config_ioctl (Min)
- Sanitycheck MMIO access early in driver load and during forcewake
(Matt)
- Wakeref fixes for GuC RC error scenario and active VM tracking (Chris)
- Cancel HuC delayed load timer on reset (Daniele)
- Limit double GT reset to pre-MTL (Daniele)
- Use i915 instead of dev_priv insied the file_priv structure (Andi)
- Improve GuC load error reporting (John)
- Simplify VCS/BSD engine selection logic (Tvrtko)
- Perform uc late init after probe error injection (Andrzej)
- Fix format for perf_limit_reasons in debugfs (Vinay)
- Create per-gt debugfs files (Andi)
- Documentation and kerneldoc fixes (Nirmoy, Lee)
- Selftest improvements (Fei, Jonathan)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZC6APj/feB+jBf2d@jlahtine-mobl.ger.corp.intel.com
In tegra_sor_compute_config(), the 32-bit value mode->clock is
multiplied by 1000, and assigned to the u64 variable pclk. We can avoid
a potential 32-bit integer overflow by casting mode->clock to u64 before
we do the arithmetic and assignment.
Signed-off-by: Nur Hussein <hussein@unixcat.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Move code from ad-hoc fbdev callbacks into DRM client functions
and remove the old callbacks. The functions instruct the client
to poll for changed output or restore the display. The DRM core
calls both, the old callbacks and the new client helpers, from
the same places. The new functions perform the same operation as
before, so there's no change in functionality.
Replace all code that initializes or releases fbdev emulation
throughout the driver. Instead initialize the fbdev client by a
single call to tegra_fbdev_setup() after tegra has registered
its DRM device. As in most drivers, tegra's fbdev emulation now
acts like a regular DRM client.
The fbdev client setup consists of the initial preparation and the
hot-plugging of the display. The latter creates the fbdev device
and sets up the fbdev framebuffer. The setup performs display
hot-plugging once. If no display can be detected, DRM probe helpers
re-run the detection on each hotplug event.
A call to drm_dev_unregister() releases the client automatically.
No further action is required within tegra. If the fbdev
framebuffer has been fully set up, struct fb_ops.fb_destroy
implements the release. For partially initialized emulation, the
fbdev client reverts the initial setup.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Initialize the fbdev client in the fbdev code with empty helper
functions. Also clean up the client. The helpers will later
implement various functionality of the DRM client. No functional
changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Only build tegra's fbdev emulation if CONFIG_DRM_FBDEV_EMULATION
has been enabled. As part of this change, move the code into its
own source file. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
When swapping in, or under memory pressure ttm_tt_populate() may sleep
for a substantiable amount of time. Allow interrupts during the sleep.
This will also allow us to inject -EINTR errors during swapin in upcoming
patches.
Also avoid returning VM_FAULT_OOM, since that will confuse the core
mm, making it print out a confused message and retrying the fault.
Return VM_FAULT_SIGBUS also under OOM conditions.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230404200650.11043-4-thomas.hellstrom@linux.intel.com
When swapping out, we will split multi-order pages both in order to
move them to the swap-cache and to be able to return memory to the
swap cache as soon as possible on a page-by-page basis.
Reduce the page max order to the system PMD size, as we can then be nicer
to the system and avoid splitting gigantic pages.
Looking forward to when we might be able to swap out PMD size folios
without splitting, this will also be a benefit.
v2:
- Include all orders up to the PMD size (Christian König)
v3:
- Avoid compilation errors for architectures with special PFN_SHIFTs
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230404200650.11043-3-thomas.hellstrom@linux.intel.com
When hitting an error, the error path forgot to unmap dma mappings and
could call set_pages_wb() on already uncached pages.
Fix this by introducing a common ttm_pool_free_range() function that
does the right thing.
v2:
- Simplify that common function (Christian König)
v3:
- Rename that common function to ttm_pool_free_range() (Christian König)
Fixes: d099fc8f54 ("drm/ttm: new TT backend allocation pool v3")
Cc: Christian König <christian.koenig@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230404200650.11043-2-thomas.hellstrom@linux.intel.com
Now that we have all the components of a minimum QAIC which can boot and
run an AIC100 device, add the infrastructure that allows the QAIC driver
to be built.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Acked-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-8-git-send-email-quic_jhugo@quicinc.com
Some of the MHI channels for an AIC100 device need to be routed to
userspace so that userspace can communicate directly with QSM. The MHI
bus does not support this, and while the WWAN subsystem does (for the same
reasons), AIC100 is not a WWAN device. Also, MHI is not something that
other accelerators are expected to share, thus an accel subsystem function
that meets this usecase is unlikely.
Create a QAIC specific MHI userspace shim that exposes these channels.
Start with QAIC_SAHARA which is required to boot AIC100 and is consumed by
the kickstart application as documented in aic100.rst
Each AIC100 instance (currently, up to 16) in a system will create a
chardev for QAIC_SAHARA. This chardev will be found as
/dev/<mhi instance>_QAIC_SAHARA
For example - /dev/mhi0_QAIC_SAHARA
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Acked-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-7-git-send-email-quic_jhugo@quicinc.com
Add the datapath component that manages BOs and submits them to running
workloads on the qaic device via the dma_bridge hardware. This allows
QAIC clients to interact with their workloads (run inferences) via the
following ioctls along with mmap():
DRM_IOCTL_QAIC_CREATE_BO
DRM_IOCTL_QAIC_MMAP_BO
DRM_IOCTL_QAIC_ATTACH_SLICE_BO
DRM_IOCTL_QAIC_EXECUTE_BO
DRM_IOCTL_QAIC_PARTIAL_EXECUTE_BO
DRM_IOCTL_QAIC_WAIT_BO
DRM_IOCTL_QAIC_PERF_STATS_BO
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Acked-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-6-git-send-email-quic_jhugo@quicinc.com
Add the control path component that talks to the management processor (QSM)
to load workloads onto the AIC100 device. This implements the KMD portion
of the NNC protocol over the QAIC_CONTROL MHI channel and the
DRM_IOCTL_QAIC_MANAGE IOCTL to userspace. With this functionality, QAIC
clients are able to load, run, and cleanup their workloads on the device
but not interact with the workloads (run inferences).
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Acked-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-5-git-send-email-quic_jhugo@quicinc.com
An AIC100 device contains a MHI interface with a number of different
channels for controlling different aspects of the device. The MHI
controller works with the MHI bus to enable and drive that interface.
AIC100 uses the BHI protocol in PBL to load SBL. The MHI controller
expects the SBL to be located at /lib/firmware/qcom/aic100/sbl.bin and
expects the MHI bus to manage the process of loading and sending SBL to
the device.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Acked-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-4-git-send-email-quic_jhugo@quicinc.com
Add the QAIC driver uapi file and core driver file that binds to the PCIe
device. The core driver file also creates the accel device and manages
all the interconnections between the different parts of the driver.
The driver can be built as a module. If so, it will be called "qaic.ko".
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Acked-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-3-git-send-email-quic_jhugo@quicinc.com
The Qualcomm Cloud AI 100 (AIC100) device is an Artificial Intelligence
accelerator PCIe card. It contains a number of components both in the
SoC and on the card which facilitate running workloads:
QSM: management processor
NSPs: workload compute units
DMA Bridge: dedicated data mover for the workloads
MHI: multiplexed communication channels
DDR: workload storage and memory
The Linux kernel driver for AIC100 is called "QAIC" and is located in the
accel subsystem.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Acked-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-2-git-send-email-quic_jhugo@quicinc.com
If the crtc is being switched on or off then the semantics of
computing the timestampe of the next vblank is somewhat ill-defined.
And indeed, the code splats with a warning in the timestamp
computation code. Specifically it hits the check to make sure that
atomic drivers have full set up the timing constants in the drm_vblank
structure, and that's just not the case before the crtc is actually
on.
For robustness it seems best to just not set deadlines for modesets.
v2: Also skip on inactive crtc (Ville)
Link: https://lore.kernel.org/dri-devel/dfc21f18-7e1e-48f0-c05a-d659b9c90b91@linaro.org/
Fixes: d39e48ca80 ("drm/atomic-helper: Set fence deadline for vblank")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # test patch only
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230405133105.947834-1-daniel.vetter@ffwll.ch
Colin Ian King