It is not used anywhere in the file, so there is no need to keep it.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220706120230.427296-9-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Old code resets SIE for up to 8 streams using byte accessor, but
register is laid out in following way:
31 GIE
30 CIE
29:x Reserved
x-1:0 SIE
If there is more than 8 streams, some of them may and up with enabled
interrupts. To fix this just clear whole INTCTL register when disabling
interrupts.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220706120230.427296-8-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If early probe of HDAudio bus driver fails e.g.: due to missing
firmware file, snd_hda_codec_shutdown() ends in manipulating
uninitialized codec->pcm_list_head causing page fault.
Iinitialization of HDAudio codec in ASoC is split in two:
- snd_hda_codec_device_init()
- snd_hda_codec_device_new()
snd_hda_codec_device_init() is called during probe_codecs() by HDAudio
bus driver while snd_hda_codec_device_new() is called by
codec-component's ->probe(). The second call will not happen until all
components required by related sound card are present within the ASoC
framework. With firmware failing to load during the PCI's deferred
initialization i.e.: probe_work(), no platform components are ever
registered. HDAudio codec enumeration is done at that point though, so
the codec components became registered to ASoC framework, calling
snd_hda_codec_device_init() in the process.
Now, during platform reboot snd_hda_codec_shutdown() is called for every
codec found on the HDAudio bus causing oops if any of them has not
completed both of their initialization steps. Relocating field
initialization fixes the issue.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220706120230.427296-7-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
AVS HDAudio bus driver does not tie with codec drivers tighly. Codec
device and its respective driver cleanup procedures are split and may
not occur one after the other. Device cleanup is performed only on
snd_hdac_ext_bus_device_remove() i.e. it's the bus driver's
responsibility. If codec component probing fails, put_device() found in
snd_hda_codec_device_new() may lead to page fault. Relocate it to
snd_hda_codec_new() to address the problem on ASoC side while keeping
status quo for snd_hda_intel.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220706120230.427296-5-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
AVS HDAudio bus driver does not tie with codec drivers tighly and
snd_hda_codec_device_new() can be called after codec's module reload. In
such case, rpm is forbidden and invoking pm_runtime_forbid()
unconditionally causes device's usage_count to become unbalanced. This
is later caught by WARN_ON() found in sound/soc/hda.c. Detect such
circumstance and bump the usage_count instead.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220706120230.427296-4-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If snd_hda_hdmi_codec module is denylisted and any event causes i915
enumeration to fail, is_likely_hdmi_codec() ends in null-ptr-deref.
As snd_soc_hda is an ASoC-based driver, its initialization is delayed
until all the necessary components appear in the system - allowing
actual sound card to enumerate. snd_hda_codec_configure() gets called by
the avs-driver core during probe_codecs() but the
snd_hda_codec_device_new(), necessary to complete codecs initialization,
happens only when codec-component of hda sound card is being probed.
Denylisting snd_hda_codec_hdmi module causes snd_hda_codec_configure()
to reach: codec_bind_generic() -> is_likely_hdmi_codec() which makes use
of ->wcaps and at this point the it isn't initialized yet - again,
requires completion of snd_hda_codec_device_new().
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220706120230.427296-3-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Quite a large batch due to things building up for a couple of weeks but
all driver specific apart from Marek's documentation fix.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmLHDQcACgkQJNaLcl1U
h9DaoAf+LjanLg76KbeHMQg/IaG2dhvKJvSAjixMdLlNixMDpSOVr/2UR4lzLCpw
gfoJk9liujPjtKMsIlQT/OiVdsMROc8vfb10PdmV7rntaBwCN01aqyr4NMauOmby
ccdZlsoj7D0k3iTtP0nlZ+Xvm+L0zTEfI66bSB9UU+/h8PDSoK/RHMCjNBtqenAd
4QMQWxQTvqt3xfgrWxiZeFPUJrLFjDypEDqG8qx8roIcbzEhVYInGq52XZw3ST9o
mvC/LIFK96WvDGgiOj2UNmSuWpe3lF7cMPmomwyYkdUMcMwbSdVfDOsnAdnyqONi
RiWIr7g5NOPkYa4mSNhB9Ia1PTzf0Q==
=V5ia
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.19-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.19
Quite a large batch due to things building up for a couple of weeks but
all driver specific apart from Marek's documentation fix.
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Audio Graph Card2 has Codec2Codec support, but I noticed
- Current Codec2Codec setting value is not correct
because it is using of_get_property().
- simple-card-utils has default Codec2Codec settings
and it is overwriting Card2 settings
- This default settings works for non Codec2Codec case
(= DPCM::BE case) too.
This patch-set solve these issues.
Free the memories allocated in sof_ipc4_get_audio_fmt in error handling
and ipc_free()
Fixes: 2cabd02b60 ("ASoC: SOF: ipc4-topology: Add support for parsing AIF_IN/AIF_OUT widgets")
Fixes: abfb536bd1 ("ASoC: SOF: ipc4-topology: Add support for parsing DAI_IN/DAI_OUT widgets")
Fixes: 4f838ab208 ("ASoC: SOF: ipc4-topology: Add support for parsing and preparing pga widgets")
Fixes: 4d4ba014ac ("ASoC: SOF: ipc4-topology: Add support for parsing mixer widgets")
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220708200516.26853-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the swidget->private or dai->private to NULL after kfree in the error
handling in ipc_setup(). The private needs to be set NULL because if
ipc_setup() returns error, ipc_free() will be called later. ipc_free()
will judge the private is NULL or not to do the clearing.
For dai widget, dai->private is allocated and set in dai widget
ipc_setup(). So we need to check dai->private is NULL or not
in the ipc_free().
Fixes: 2cabd02b60 ("ASoC: SOF: ipc4-topology: Add support for parsing AIF_IN/AIF_OUT widgets")
Fixes: abfb536bd1 ("ASoC: SOF: ipc4-topology: Add support for parsing DAI_IN/DAI_OUT widgets")
Fixes: 4f838ab208 ("ASoC: SOF: ipc4-topology: Add support for parsing and preparing pga widgets")
Fixes: 4d4ba014ac ("ASoC: SOF: ipc4-topology: Add support for parsing mixer widgets")
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220708200516.26853-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Module unloading operation performs memory unmapping and the weight of
the opration does not different from any other standard IPC. There is no
dependency on secondary task like in module loading scenario where
larger message timeout is recommended.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dma_set_mask() and dma_set_coherent_mask() can be performed with one
call to dma_set_mask_and_coherent(), which slightly reduces amount of
code on our side.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To allow for driver's filesystem interfaces e.g.: debugfs, to be touched
even when the device is asleep, mark IPC-channel as blocked when the
device is suspended. This causes any invocation of said interfaces that
do not toggle PM themselves to gracefully fail with "Operation not
permitted" message.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some LARGE_CONFIG_GETs are never expected to return payload of size 0.
Check for such situation and collapse if met.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no need to copy number of bytes specified by IPC message caller
if DSP firmware returned lower number. In consequence, LARGE_CONFIG_GET
handler is simplified.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To avoid any false positives when checking CPA after setting SPA, do a
short wait. For stall operation, give HW more time to propagate the
change before moving on.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For formatted port - ssp%d - descriptions to have an effect, copier
module templates need to be updated with specified port value. This
value is later propagated to the firmware when module instances are
being instantiated.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add i2s and dmic support for Rembrandt platform,
Add machine support for nau8825, max98360 and rt5682s,rt1019 codec
in legacy driver for rembrandt platform.
Here codec is in a slave mode.
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Link: https://lore.kernel.org/r/20220707161142.491034-4-Vsujithkumar.Reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ADD Generic code to support to newer platforms, add
control threshold, irq control macros ,added structure for register
offset differences.
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Link: https://lore.kernel.org/r/20220707161142.491034-3-Vsujithkumar.Reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove rt1019_1 codec configuration which has i2c-10EC1019:01 and
i2c-10EC1019:02 codec components, Now Using default i2c-10EC1019:00
and i2c-10EC1019:01 codec components.
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Link: https://lore.kernel.org/r/20220707161142.491034-2-Vsujithkumar.Reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds driver data for adl_mx98360a_cs4242 which supports
two max98360a speaker amplifiers on SSP1 and cs42l42 headphone codec
on SSP0 running on ADL platform.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220708110030.658468-3-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the capability to machine driver of creating DAI Link for BT
offload. Although BT offload always uses SSP2 port but we reserve the
flexibility to assign the port number in macro.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220708110030.658468-2-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The patch is to make driver with flexibility for more platforms support even if
the internal design is just one ADC. Besides, many I2S controllers only support
2 channels.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20220708054647.540621-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix below kernel warning.
>>> sound/soc/amd/acp-es8336.c:200:13: warning: variable 'ret' set but
>>> not used [-Wunused-but-set-variable]
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220707132613.3150931-3-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sparse warnings:
sound/soc/amd/acp-es8336.c:36:15: error: symbol 'codec_dev' was not
declared. Should it be static?
sound/soc/amd/acp-es8336.c:37:18: error: symbol 'gpio_pa' was not
declared. Should it be static?
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220707214614.61081-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current asoc_simple_init_for_codec2codec() adds default Codec2Codec
settings if rtd was Codec only.
But DPCM:BE also judged as Codec only, because dummy-DAI doesn't have
"endianness" (which is key parameter to judge as Codec).
This patch ignores setup Codec2Codec settings if it was DPCM:BE case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a69ts950.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Audio Graph Card2 setups own Codec2Codec settings,
but current simple-card-utils.c will try to setup Codec2Codec default
settings if needed, it will overwirtes the settings.
This patch ignores default Codec2Codec settings if it already have.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bku9s95b.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
audio-graph-card2-custom-sample.dtsi will be used to test
Audio-Graph-Card2 behavior. But it is difficult to say that it is easy
to understand, because the comment/explanation are not so many.
This patch add verbose explanation to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87czeps95h.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because Codec2Codec settings becomes optional, we don't need to keep
its parameter space when init time. This patch removes its default
memory allocation from simple-card-utils.c, and allocate it at
audio-graph-card2 ondemand.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87edz5s95o.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current audio-graph-card2 can use Codec2Codec, and having its
original parameter (= rate) on DT is mandatory for now.
But simple-card-utils.c has asoc_simple_init_for_codec2codec() to
setup *default* Codec2Codec settings.
This patch makes Audio Graph Card2 Codec2Codec rate settings
optional.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87fsjls95u.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Audio Graph Card2 is using of_get_property(), but it should use
of_property_read_u32() to getting rate. Otherwise the setting will be
strange value. This patch fixup it.
Fixes: c3a15c92a6 ("ASoC: audio-graph-card2: add Codec2Codec support")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h741s961.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The struct nhlt_format's fmt_config is a flexible array, it must not be
used as normal array.
When moving to the next nhlt_fmt_cfg we need to take into account the data
behind the ->config.caps (indicated by ->config.size).
The logic of the code also changed: it is no longer saves the _last_
fmt_cfg for all found rates.
Fixes: bc2bd45b1f ("ASoC: Intel: Skylake: Parse nhlt and register clock device")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220630065638.11183-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The present flag is only set once when one rate has been found to be saved.
This will effectively going to ignore any rate discovered at later time and
based on the code, this is not the intention.
Fixes: bc2bd45b1f ("ASoC: Intel: Skylake: Parse nhlt and register clock device")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220630065638.11183-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The patch fixes the wrong state of JD1 and JD2 while the bst1 or bst2 is
power on in the HDA JD using.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Reported-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20220705101134.16792-1-oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Starting from ADL platform we have four HDMI PCM devices which exceeds
the size of sof_hdmi array. Since each sof_hdmi_pcm structure
represents one HDMI PCM device, we remove the sof_hdmi array and add a
new member hdmi_jack to the sof_hdmi_pcm structure to fix the
out-of-bounds problem.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220701141517.264070-1-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
q6apm_get_audioreach_graph() allocates a memory chunk for graph->graph
with audioreach_alloc_graph_pkt(). When idr_alloc() fails, graph->graph
is not released, which will lead to a memory leak.
We can release the graph->graph with kfree() when idr_alloc() fails to
fix the memory leak.
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220629182520.2164409-1-niejianglei2021@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The register default is 0x28 per the datasheet, and the amp gain field
is supposed to be shifted left by one. With the wrong default, the ALSA
controls lie about the power-up state. With the wrong shift, we get only
half the gain we expect.
Signed-off-by: Hector Martin <marcan@marcan.st>
Fixes: 827ed8a0fa ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220630075135.2221-4-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
DVC value 0xc8 is -100dB and 0xc9 is mute; this needs to map to
-100.5dB as far as the dB scale is concerned. Fix that and enable
the mute flag, so alsamixer correctly shows the control as
<0 dB .. -100 dB, mute>.
Signed-off-by: Hector Martin <marcan@marcan.st>
Fixes: 827ed8a0fa ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220630075135.2221-3-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix setting of FSYNC polarity in case of LEFT_J and DSP_A/B formats.
Do NOT set the SCFG field as was previously done, because that is not
correct and is also in conflict with the "ASI1 Source" control which
sets the same SCFG field!
Also add support for explicit polarity inversion.
Fixes: 827ed8a0fa ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220630075135.2221-2-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure there is at least 1 ms delay from reset to first command as
is specified in the datasheet. This is a fix similar to commit
307f314520 ("ASoC: tas2770: Insert post reset delay").
Fixes: 827ed8a0fa ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220630075135.2221-1-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the function arizona_aif_cfg_changed uses the TX_BCLK_RATE,
however this register is not used on wm8998. This was not noticed as
previously snd_soc_component_read did not print an error message.
However, now the log gets filled with error messages, further more the
test for if the LRCLK changed will return spurious results.
Update the code to use the RX_BCLK_RATE register, the LRCLK parameters
are written to both registers and the RX_BCLK_RATE register is used
across all Arizona devices.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220628153409.3266932-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cs47l92_put_demux returns the value of snd_soc_dapm_mux_update_power,
which returns a 1 if a path was found for the kcontrol. This is
obviously different to the expected return a 1 if the control
was updated value. This results in spurious notifications to
user-space. Update the handling to only return a 1 when the value is
changed.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220628153409.3266932-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
wm8998_inmux_put returns the value of snd_soc_dapm_mux_update_power,
which returns a 1 if a path was found for the kcontrol. This is
obviously different to the expected return a 1 if the control
was updated value. This results in spurious notifications to
user-space. Update the handling to only return a 1 when the value is
changed.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220628153409.3266932-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The output compensation controls always returns zero regardless of if
the control value was updated. This results in missing notifications
to user-space of the control change. Update the handling to return 1
when the value is changed.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220628153409.3266932-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently slim_tx_mixer_get reports all TX mixers as enabled when
at least one is, due to it reading the entire tx_port_value bitmask
without testing the specific bit corresponding to a TX port.
Furthermore, using the same bitmask for all capture DAIs makes
setting one mixer affect them all. To prevent this, and since
the SLIM TX muxes effectively only connect to one of the mixers
at a time, turn tx_port_value into an int array storing the DAI
index each of the ports is connected to.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/20220622061745.35399-1-y.oudjana@protonmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The tx_mask check doesn't reflect what the driver and the chip support.
The check currently checks for exactly two slots being enabled. The
tlv320adcx140 supports anything between one and eight channels, so relax
the check accordingly.
The tlv320adcx140 supports arbitrary tx_mask settings, but the driver
currently only supports adjacent slots beginning with the first slot,
so extend the check to check that the first slot is being used and that
there are no holes in the tx_mask.
Leave a comment to make it's the driver that limits the tx_mask
settings, not the chip itself.
While at it remove the set-but-unused struct adcx140p_priv::tdm_delay
field.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220624105716.2579539-1-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
max98396_dai_set_fmt() modifes register 2041 and touches bits in the mask
0x3a. Make sure to use the right mask for that operation.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20220624104712.1934484-7-daniel@zonque.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert to managed versions of sysfs and clk allocation to simplify
unbinding and error handling in probe. Managed sysfs node
creation specifically addresses the following error seen the second time
probe is attempted after sdma_pcm_platform_register() previously requsted
probe deferral:
sysfs: cannot create duplicate filename '/devices/platform/68000000.ocp/49022000.mcbsp/max_tx_thres'
Signed-off-by: David Owens <dowens@precisionplanting.com>
Link: https://lore.kernel.org/r/20220620183744.3176557-1-dowens@precisionplanting.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The example in audio-graph-card2.c has multiple nodes with the same name
in it. Change the port numbers to get different names.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220624092601.2445224-1-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Put the SGTL5000 in a silent/safe state on shutdown/remove, this is
required since the SGTL5000 produces a constant noise on its output
after it is configured and its clock is removed. Without this change
this is happening every time the module is unbound/removed or from
reboot till the clock is enabled again.
The issue was experienced on both a Toradex Colibri/Apalis iMX6, but can
be easily reproduced everywhere just playing something on the codec and
after that removing/unbinding the driver.
Fixes: 9b34e6cc3b ("ASoC: Add Freescale SGTL5000 codec support")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20220624101301.441314-1-francesco.dolcini@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix sparse warning:
sound/soc/fsl/fsl_utils.c:125:31: sparse: warning: Using plain integer as NULL pointer
sound/soc/fsl/fsl_utils.c:125:42: sparse: warning: Using plain integer as NULL pointer
Fixes: 7bad812554 ("ASoC: fsl_utils: Add function to handle PLL clock source")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1657192806-10569-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Aidan MacDonald <aidanmacdonald.0x0@gmail.com>:
This series is a preparatory cleanup of the jz4740-i2s driver before
adding support for a new SoC.
It's simpler to set up the playback and capture DMA settings
at driver probe time instead of during DAI probing.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220706211330.120198-3-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver doesn't require Open Firmware support. Remove the
OF-specific includes and drop the Kconfig dependency.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220706211330.120198-2-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixed ACPI dependency complie errors and warnings as listed below.
All warnings (new ones prefixed by >>):
sound/soc/soc-acpi.c:34:1: error: redefinition of 'snd_soc_acpi_find_machine'
34 | snd_soc_acpi_find_machine(struct snd_soc_acpi_mach *machines)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
In file included from sound/soc/soc-acpi.c:9:
include/sound/soc-acpi.h:38:1: note: previous definition of
'snd_soc_acpi_find_machine'
with type 'struct snd_soc_acpi_mach *(struct snd_soc_acpi_mach *)'
38 | snd_soc_acpi_find_machine(struct snd_soc_acpi_mach *machines)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/soc-acpi.c: In function 'snd_soc_acpi_find_package':
sound/soc/soc-acpi.c:58:36: error: implicit declaration of function
'acpi_fetch_acpi_dev';
did you mean 'device_match_acpi_dev'?
[-Werror=implicit-function-declaration]
58 | struct acpi_device *adev = acpi_fetch_acpi_dev(handle);
| ^~~~~~~~~~~~~~~~~~~
| device_match_acpi_dev
>> sound/soc/soc-acpi.c:58:36: warning: initialization of
'struct acpi_device *' from 'int' makes pointer from integer
without a cast [-Wint-conversion]
sound/soc/soc-acpi.c:64:25: error: invalid use of undefined type
'struct acpi_device'
64 | if (adev && adev->status.present && adev->status.functional) {
| ^~
sound/soc/soc-acpi.c:64:49: error: invalid use of undefined type
'struct acpi_device'
64 | if (adev && adev->status.present && adev->status.functional) {
| ^~
sound/soc/soc-acpi.c:80:26: error: implicit declaration of function
'acpi_extract_package' [-Werror=implicit-function-declaration]
80 | status = acpi_extract_package(myobj,
| ^~~~~~~~~~~~~~~~~~~~
sound/soc/soc-acpi.c: At top level:
sound/soc/soc-acpi.c:95:6: error: redefinition of
'snd_soc_acpi_find_package_from_hid'
95 | bool snd_soc_acpi_find_package_from_hid(const u8 hid[ACPI_ID_LEN],
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from sound/soc/soc-acpi.c:9:
include/sound/soc-acpi.h:44:1: note: previous definition of
'snd_soc_acpi_find_package_from_hid'
with type 'bool(const u8 *, struct snd_soc_acpi_package_context *)'
{aka '_Bool(const unsigned char *,
struct snd_soc_acpi_package_context *)'}
44 | snd_soc_acpi_find_package_from_hid(const u8 hid[ACPI_ID_LEN],
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/soc-acpi.c:109:27: error: redefinition of
'snd_soc_acpi_codec_list'
109 | struct snd_soc_acpi_mach *snd_soc_acpi_codec_list(void *arg)
| ^~~~~~~~~~~~~~~~~~~~~~~
In file included from sound/soc/soc-acpi.c:9:
include/sound/soc-acpi.h:51:41: note: previous definition of
'snd_soc_acpi_codec_list' with type 'struct snd_soc_acpi_mach *(void *)'
51 | static inline struct snd_soc_acpi_mach
*snd_soc_acpi_codec_list(void *arg)
| ^~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220706205515.2485601-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If more than one call of rsnd_dai_call(remove, ...) fails the platform
remove callback returns all values orred together which then makes the
driver core emit a generic error message which is little helpful.
Instead emit details of which call failed exactly and return 0. Note
returning 0 instead of an error code doesn't make a difference in the
driver core apart from the error message.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220705063613.93770-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Update printf formatting as 'ssp_port' argument is of type 'int', not
'long int'.
Fixes: e39acc4cfd ("ASoC: Intel: avs: Add I2S-test machine board")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220706062952.251704-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DSD/PDM rate not only DSD64/128/256/512, which are the
multiple rate of 44.1kHz, but also support the multiple
rate of 8kHz, so can't force all mclk frequency to be
22579200Hz, need to assign the frequency according to
rate.
Fixes: aa736700f4 ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1657100575-8261-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Vijendar Mukunda <Vijendar.Mukunda@amd.com>:
Jadeite(JD) platform is Stoney APU varaint which uses I2S MICSP
instance and ES8336 Codec.
This patch series creates I2S platform devices for JD platform,
adds I2S MICSP instance support and Machine driver support
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
i.MX8MQ/MN/MM/MP platforms typically have 2 AUDIO PLLs being
configured to handle 8kHz and 11kHz series audio rates.
The patches implement the functionality to select at runtime
the appropriate AUDIO PLL for root clock, if there is no
two PLL registered, then no action taken.
device_get_match_data() in ACPI case calls similar to acpi_match_device().
Hence there is no need to duplicate the call. Just assign what is in
the id->driver_data.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220705161102.76250-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
device_get_match_data() in ACPI case calls similar to acpi_match_device().
Hence there is no need to duplicate the call. Just assign what is in
the id->driver_data.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220705161102.76250-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dev member of struct tegra20_das is only written once in .probe().
There is no loss of functionality if the member and the assignment go away.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220629194224.175607-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
These only ever return a value != 0 if the parameter das is NULL. In the
only caller however it's already asserted this isn't the case.
So convert the functions to return void and simplify the caller
accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220629194224.175607-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
This enables the driver (at least theoretically) to bind to more than one
device.
The remove function has nothing to do now, so it is dropped.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220629194224.175607-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit fcff5f9974 ("ASoC: tegra: remove unnecessary includes")
the header file (which at the time was named tegra_das.h) there is only
the actual driver that includes it. Just move the definitions into the
driver, drop the exports and remove the completely unused function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220629194224.175607-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the error code '-EBUSY' when fail to read I2S_CLR
in rockchip_snd_rxctrl() and rockchip_snd_txctrl()
Fixes: 44f362c2cc ("ASoC: rockchip: i2s: switch BCLK to GPIO")
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20220701021427.3120549-1-judyhsiao@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
device_get_match_data() in ACPI case calls similar to acpi_match_device().
Hence there is no need to duplicate the call. Just assign what is in
the id->driver_data.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220705155813.75917-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit e39acc4cfd ("ASoC: Intel: avs: Add I2S-test machine board") adds
the config "SND_SOC_INTEL_AVS_MACH_I2S_TEST", but in the Makefile refers
to config "SND_SOC_INTEL_AVS_MACH_i2s_TEST" (notice the uppercase and
lowercase difference).
Adjust the Makefile to refer to the actual existing config.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20220705103238.7484-1-lukas.bulwahn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Returning an error value in a platform remove callback results in an error
message being emitted by the platform core, but otherwise it doesn't make
a difference. If ret is != 0, there is already an error message and another
very generic doesn't add any value, so return 0 unconditionally.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220705092645.101343-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20220705005315.663920-1-cuigaosheng1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The previous cleanup with devres may lead to the incorrect release
orders at the probe error handling due to the devres's nature. Until
we register the card, snd_card_free() has to be called at first for
releasing the stuff properly when the driver tries to manage and
release the stuff via card->private_free().
This patch fixes it by calling snd_card_free() manually on the error
from the probe callback.
Fixes: 5bff69b364 ("ALSA: cs46xx: Allocate resources with device-managed APIs")
Cc: <stable@vger.kernel.org>
Reported-and-tested-by: Jan Engelhardt <jengelh@inai.de>
Link: https://lore.kernel.org/r/p2p1s96o-746-74p4-s95-61qo1p7782pn@vanv.qr
Link: https://lore.kernel.org/r/20220705152336.350-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The patch adds the MICBIAS1 to the dapm routing while the HDA header used.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Reported-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20220705101134.16792-2-oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
i.MX8MQ/MN/MM/MP platforms typically have 2 AUDIO PLLs being
configured to handle 8kHz and 11kHz series audio rates.
The patch implements the functionality to select at runtime
the appropriate AUDIO PLL as function of sysclk rate.
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1656667961-1799-5-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
i.MX8MQ/MN/MM/MP platforms typically have 2 AUDIO PLLs being
configured to handle 8kHz and 11kHz series audio rates.
The patch implements the functionality to select at runtime
the appropriate AUDIO PLL as function of audio file rate.
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1656667961-1799-4-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
i.MX8MQ/MN/MM/MP platforms typically have 2 AUDIO PLLs being
configured to handle 8kHz and 11kHz series audio rates.
The patch implements the functionality to select at runtime
the appropriate AUDIO PLL as function of audio file rate.
As the clock parent may be changed, need to probe txclk
according to sample rate again.
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1656667961-1799-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
i.MX8MQ/MN/MM/MP platforms typically have 2 AUDIO PLLs being
configured to handle 8kHz and 11kHz series audio rates.
Add common function in fsl_utils to handle these two PLL
clock source, which are needed by CPU DAI drivers
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1656667961-1799-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sparse reports
sound/pci/hda/patch_cs8409-tables.c:79:25: warning: symbol 'cs8409_cs42l42_pincfgs_no_dmic' was not declared. Should it be static?
cs8409_cs42l42_pincfgs_no_dmic is only used by cs8409_fixups table as an
initializer for the hda_fixup element v.pins. Both are defined in the
patch_cs8408-table.c file but only cs8409_fixups is used externally in
patch_cs8409.c. So cs8409_cs42l42_pincfgs_no_dmic should have a static
storage class specifier.
The other v.pins initializers in cs8409_fixups table, though declared
extern in patch_cs8409.h are also only used in patch_cs8409-tables.c.
So change all the v.pins initializers to static.
Fixes: 9e7647b507 ("ALSA: hda/cs8409: Move arrays of configuration to a new file")
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20220704142836.636204-1-trix@redhat.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The TRACE_EVENT() macro is broken up into various parts to be efficient.
The TP_fast_assign() is just to record the event into the ring buffer, and
is to be done as fast as possible as this occurs during the actual running
of the code. The slower this is, the slower the code that is being traced
becomes.
The TP_printk() is processed when reading the tracing buffer. This is
considered the slow path. Any processing that can be moved from the
TP_fast_assign() to the TP_printk() should do so.
For some reason, the entire string processing of the trace events
hda_send_cmd, hda_get_response, and hda_unsol_event was moved from the
TP_printk() into the TP_fast_assign(). On top of that, the
__dynamic_array() was used with a fixed size of HDAC_MSG_MAX, which is
useless as a dynamic_array as it will always allocate HDAC_MSG_MAX bytes
on the ring buffer and even save that amount into the event (as it expects
the size to be dynamic, which using a fixed size defeats that purpose).
Instead, just save the necessary elements in the TP_fast_assign() and do
the string manipulation in the slow path.
The output should be the same.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20220703110605.07a86fb2@rorschach.local.home
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pointer end is being re-assigned the same value as it was initialized
with in the previous statement. The re-assignment is redundant and
can be removed.
Cleans up clang scan-build warning:
sound/isa/wavefront/wavefront_synth.c:582:17: warning: Value stored
to 'end' during its initialization is never read
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220629102744.139673-1-colin.i.king@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This removes the need to power cycle the Dell WD15 dock if it has been
attached to a Windows machine.
The Windows driver puts the ALC4020 USB audio controller into
'manual mode', and then does all the power management and other
configuration itself, by sending HD audio commands directly to the
ALC3263 audio codec via vendor-type USB messages. If manual mode is off,
this is all handled by the firmware, and works well enough.
If manual mode is turned on, the latency of the SET INTERFACE command
goes from several hundred ms to less than 1 ms
(see https://bugzilla.suse.com/show_bug.cgi?id=1089467), but I'm not
sure if the additional code that would be required is worth it.
Funnily enough, the Windows driver tries to turn off manual mode when
the dock is disconnected, which doesn't work for obvious reasons.
Additionally, fix a bug in dell_dock_init_vol, which didn't work because
the Control Selector was missing.
Now, it properly resets the volume to 0dB.
Fixes: 964af639ad ("ALSA: usb-audio: Initialize Dell Dock playback volumes")
Signed-off-by: Jan Schär <jan@jschaer.ch>
Link: https://lore.kernel.org/r/20220627171855.42338-2-jan@jschaer.ch
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Dell WD15 dock has a headset and a line out port. Add support for
detecting if a jack is inserted into one of these ports.
For the headset jack, additionally determine if a mic is present.
The WD15 contains an ALC4020 USB audio controller and ALC3263 audio codec
from Realtek. It is a UAC 1 device, and UAC 1 does not support jack
detection. Instead, jack detection works by sending HD Audio commands over
vendor-type USB messages.
I found out how it works by looking at USB captures on Windows.
The audio codec is very similar to the one supported by
sound/soc/codecs/rt298.c / rt298.h, some constant names and the mic
detection are adapted from there. The realtek_add_jack function is adapted
from build_connector_control in sound/usb/mixer.c.
I tested this on a WD15 dock with the latest firmware.
Signed-off-by: Jan Schär <jan@jschaer.ch>
Link: https://lore.kernel.org/r/20220627171855.42338-1-jan@jschaer.ch
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A collection of fixes for v5.19, quite large but nothing major - a good
chunk of it is more stuff that was identified by mixer-test regarding
event generation.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmK12zAACgkQJNaLcl1U
h9C1MQf/Z2R0KmA73QWqSut9IXwUGpAvPQJtx8hOUKkA7efQNcK4xywa0CbnmFLp
kUAAXD5FhpPkZpLDAmjpTVgmgB6Wep2FX5LM5YnUgC4/sha3OpnBPD3ryGVuhJ2b
X/70GfflZRmlLCzp4UALieqgRjXb/Lk6gqeCNOzr6A5ewYLq4/1h4rPRaWluZ4MQ
kjL4TXYfRXbK1g39EQMelV/HEgRiZ5NhnoujtOfQGZa8iUF9r9EAmD3PKqR0kp8d
vUD4nxt7PuQW+ksdnJuRsBII3/MwrkF8S5lgfyBW80C71YeGVaba0Ty05oTF2u2H
GAWHfoGTw1dDnI3JwcI+7ZT6zX+HpA==
=3OmW
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.19
A collection of fixes for v5.19, quite large but nothing major - a good
chunk of it is more stuff that was identified by mixer-test regarding
event generation.
The patch applies the same quirks used for SC-01 at firmware v1.1.0 to
the ones running v1.0.0, with respect to hard-coded sample rates.
I got two more units and successfully tested the patch series with both
firmwares.
The support is now complete (not accounting ASIO).
Signed-off-by: Egor Vorontsov <sdoregor@sdore.me>
Link: https://lore.kernel.org/r/20220627100041.2861494-2-sdoregor@sdore.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fiero SC-01 is a USB sound card with two mono inputs and a single
stereo output. The inputs are composed into a single stereo stream.
The device uses a vendor-provided driver on Windows and does not work
at all without it. The driver mostly provides ASIO functionality, but
also alters the way the sound card is queried for sample rates and
clocks.
ALSA queries those failing with an EPIPE (same as Windows 10 does).
Presumably, the vendor-provided driver does not query it at all, simply
matching by VID:PID. Thus, I consider this a buggy firmware and adhere
to a set of fixed endpoint quirks instead.
The soundcard has an internal clock. Implicit feedback mode is required
for the playback.
I have updated my device to v1.1.0 from a Windows 10 VM using a vendor-
provided binary prior to the development, hoping for it to just begin
working. The device provides no obvious way to downgrade the firmware,
and regardless, there's no binary available for v1.0.0 anyway.
Thus, I will be getting another unit to extend the patch with support
for that. Expected to be a simple copy-paste of the existing one,
though.
There were no previous reports of that device in context of Linux
anywhere. Other issues have been reported though, but that's out of the
scope.
Signed-off-by: Egor Vorontsov <sdoregor@sdore.me>
Link: https://lore.kernel.org/r/20220627100041.2861494-1-sdoregor@sdore.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Treat the claimed 96kHz 1ch in the descriptors as 48kHz 2ch, so that
the audio stream doesn't sound mono. Also fix initial stream
alignment, so that left and right channels are in the correct order.
Signed-off-by: John Veness <john-linux@pelago.org.uk>
Link: https://lore.kernel.org/r/20220624140757.28758-1-john-linux@pelago.org.uk
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'ret'.
This was found by coccicheck:
sound/soc/tegra/tegra20_ac97.c:357 tegra20_ac97_platform_probe() warn: missing error code 'ret'.
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220701072850.62408-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Need to add legacy_dai_naming flag otherwise there
will be issue when registerring component, that cause
the probe failure.
Fixes: 1e63fcc74a ("ASoC: fsl: Migrate to new style legacy DAI naming flag")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1656899417-4775-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Need to add legacy_dai_naming flag otherwise there
will be issue when registerring component, that cause
the probe failure.
Fixes: 1e63fcc74a ("ASoC: fsl: Migrate to new style legacy DAI naming flag")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1656899417-4775-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The AMD acp-es8336 machine driver requires ES8316 run in producer
mode, which is not supported previously.
Signed-off-by: David Yang <yangxiaohua@everest-semi.com>
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://lore.kernel.org/r/20220704012416.3165-1-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We should call of_node_put() for the reference 'dsp_of_node' returned by
of_parse_phandle() which will increase the refcount.
Fixes: 9bae4880ac ("ASoC: qcom: move ipq806x specific bits out of lpass driver.")
Co-authored-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220702020109.263980-1-windhl@126.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add missing break in one of the switch statement.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: cdb09e6231 ("ASoC: codecs: wsa883x: add control, dapm widgets and map")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220701125515.32332-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently we do not check if SoundWire slave initialization timeout
expired before continuing to access its registers.
Its possible that the registers are not accessible if timeout is
expired. Handle this by returning timeout in resume path.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Fixes: 43b8c7dc85 ("ASoC: codecs: add wsa883x amplifier support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220630130023.9308-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently we do not check if SoundWire slave initialization timeout
expired before continuing to access its registers.
Its possible that the registers are not accessible if timeout is
expired. Handle this by returning timeout in resume path.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Fixes: 8dd5524583 ("ASoC: codecs: wsa881x: add runtime pm support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220630130023.9308-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Current ASoC has fixup both snd_soc_of_get_dai_link_cpus/codecs().
I guess cpu was copied from codec, but it is using "codec" naming everwhere
in "cpu" function. It is strange, and thus, error case will be issue
(It should call cpu function instead of codec).
This patch tidyup it, and try to cleanup.
[1/2] is for bug-fix,
[2/2] is for new feature.
The cs_dsp core will return an error if passed a NULL cs_dsp struct so
there is no need for the wm_adsp_write|read_ctl functions to manually
check that. The cs_dsp core will also check the data is within bounds of
the control so the additional bounds check is redundant too. Simplify
things a bit by removing said code.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630101459.3442327-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sparse reports
sound/soc/samsung/neo1973_wm8753.c:347:24: warning: symbol 'neo1973_audio' was not declared. Should it be static?
neo1973_audio is only used in neo1973_wm8753.c, so it's
storage class specifier should be static.
Fixes: e26a2abcc2 ("ASoC: samsung: neo1973: turn into platform driver")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220629201811.2537853-1-trix@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Yassine Oudjana <yassine.oudjana@gmail.com>:
Add DT bindings for WCD9335 DAIs and use them in the driver as well
as all device trees currently using WCD9335.
The alsa-project documentation is now part of the kernel docs,
the original links are long dead, update links.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220628165807.152191-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
sparse reports
sound/soc/samsung/rx1950_uda1380.c:131:18: warning: symbol 'gpiod_speaker_power' was not declared. Should it be static?
sound/soc/samsung/rx1950_uda1380.c:231:24: warning: symbol 'rx1950_audio' was not declared. Should it be static?
Both gpiod_speaker_power and rx1950_audio are only used in rx1950_uda1380.c,
so their storage class specifiers should be static.
Fixes: 83d74e3542 ("ASoC: samsung: rx1950: turn into platform driver")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220629185345.910406-1-trix@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Get DAI indices from DT bindings and remove the currently used
local definitions.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220622161322.168017-3-y.oudjana@protonmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC has snd_soc_of_get_dai_link_cpus/codecs(), and these are almost same
code. The main difference are below.
for_each_link_cpus() dai_link->cpus dai_link->num_cpus
for_each_link_codecs() dai_link->codecs dai_link->num_codecs
Because we need to use these parameters, we can't share full-code for now,
but can share some codes.
This patch adds __snd_soc_of_get/put_xxx() functions, and share the code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y1xpp7ju.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 900dedd7e4 ("ASoC: Introduce snd_soc_of_get_dai_link_cpus")
adds new snd_soc_of_get_dai_link_cpus(), but it is using
"codec" everywhere. It is very strange, and is issue when error case.
It should call cpu instead of codec in error case.
This patch tidyup it.
Fixes: 900dedd7e4 ("ASoC: Introduce snd_soc_of_get_dai_link_cpus")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/87zgi5p7k1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Historically, the legacy DAI naming scheme was applied to platform
drivers and the newer scheme to CODEC drivers. During componentisation
the core lost the knowledge of if a driver was a CODEC or platform, they
were all now components. To continue to support the legacy naming on
older platform drivers a flag was added to the snd_soc_component_driver
structure, non_legacy_dai_naming, to indicate to use the new scheme and
this was applied to all CODECs as part of the migration.
However, a slight issue appears to be developing with respect to this
flag being opt in for the non-legacy scheme, which presumably we want to
be the primary scheme used. Many codec drivers appear to forget to
include this flag:
grep -l -r "snd_soc_component_driver" sound/soc/codecs/*.c |
xargs grep -L "non_legacy_dai_naming" | wc
48 48 556
Whilst in many cases the configuration of the DAIs themselves will cause
the core to apply the new scheme anyway, it would seem more sensible to
change the flag to legacy_dai_naming making the new scheme opt out. This
patch series migrates across to such a scheme.
Merge series from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:
This patchset adds support for WSA883x smart speaker amplifier codec
connected via SoundWire. This codec also has a temperature sensor used
for speaker protection, support for this is not added yet.
Most of the code is derived from Qualcomm downstream msm-5.10 kernel.
Thanks to Patrick Lai's Team.
This codec is tested on SM8450 MTP.
Previous default settings resulted in loose dynamic
range and low sound level.
New default configuration changes:
- outgain = 2
- quality mode = VLOW0
- dc remover = bypass
Signed-off-by: Irina Patru <ioana-irina.patru@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1656405589-29850-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In TDM mode, the BSEL register value must be set according to table 5 in the
datasheet. This patch adds a lookup function and uses it in
max98396_dai_tdm_slot().
As the first 3 entries can also be used for non-TDM setups, the code re-uses
the same table for such scenarios.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20220629050630.2848317-1-daniel@zonque.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support to WSA8830/WSA8812/WSA8835 Class-D Smart
Speaker Amplifier. This Amplifier is primarily interfaced with
SoundWire.
This patch is tested on SM8450 MTP Board.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220629090644.67982-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The documented yaml compat string for the apq8016 is
"qcom,apq8016-lpass-cpu" not "qcom,lpass-cpu-apq8016". Looking at the other
lpass compat strings the general form is "qcom,socnum-lpass-cpu".
We need to fix both the driver and dts to match.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20220628120435.3044939-2-bryan.odonoghue@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
Support PDM format and DSD format.
Add new dts property to configure dataline. The SAI has multiple
successive FIFO registers, but in some use
case the required dataline/FIFOs are not successive.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
After a set of SOF-specific changes, this patchset correct problematic
uses of pm_runtime_get_sync() in ASoC, or simplifies the flow with no
functional changes. Two patches for Intel platforms also add a test on
resume success.
Additional changes were initially suggested to completely remove the
use of pm_runtime_get_sync(). These changes were dropped since they
are way too invasive, specifically in cases where the return values
were not tested, which would lead to duplicate pm_runtime_put(). The
remaining uses of pm_runtime_get_sync() cannot really be blindly
modified without context and knowledge of each driver.
There is no particular need to restrict building of S3C I2S driver to
supported platforms within the C unit, because Kconfig does it.
Removing such restricting #ifdef from s3c-i2s-v2 allows compile testing
it on other platforms.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220627143412.477226-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Daniel Mack <daniel@zonque.org>:
This is a series of some patches that I collected while using the
max98396 driver is a TDM mode setup.
They correct BSEL and PCM mode configs, add support for power supplies
and add some bits to the documentation.
The code is tested in TDM-16 and TDM-8 mode with 32 channel width.
Merge series from Samuel Holland <samuel@sholland.org>:
This series adds support for enabling the codec's internal microphone
bias, which is needed on at least some versions of the PinePhone.
Changes in v2:
- Move register update from component probe to device probe
Arnaud Ferraris (2):
ASoC: dt-bindings: sun50i-codec: Add binding for internal bias
ASoC: sun50i-codec-analog: Add support for internal bias
Samuel Holland (1):
arm64: dts: allwinner: pinephone: Enable internal HMIC bias
.../bindings/sound/allwinner,sun50i-a64-codec-analog.yaml | 5 +++++
.../arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts | 4 ++++
.../arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts | 4 ++++
sound/soc/sunxi/sun50i-codec-analog.c | 8 ++++++++
4 files changed, 21 insertions(+)
--
2.35.1
The conversion of the set_fmt callback to direct clock specification
included a small typo, correct the affected code.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220627094335.3051210-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SAI has multiple successive FIFO registers, but in some use
case the required dataline/FIFOs are not successive, so need
get such information from dts property "fsl,dataline"
fsl,dataline has 3 values for each configuration:
first one means the type: I2S(1) or DSD(2),
second one is dataline mask for 'rx',
third one is dataline mask for 'tx'.
Also set dma peripheral address and TRCE bits according to data lane.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Link: https://lore.kernel.org/r/1655451877-16382-8-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The resource info need to be accessed by hw_params()
function for multi fifo case, the start address may
be not the FIFO0. So move it to be a member of
struct fsl_sai.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1655451877-16382-6-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With DSD format, the pinctrl is different compare with
I2S format, because one dataline only has one channel
data, and the codec always mux the LRCLK pin to DSD
data line, and on i.MX8MQ the BCLK pin can route to
codec on DSD case for the MCLK is too high.
Add pinctrl operation that the pinctrl can be switched
on runtime according to the I2S format or DSD format
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1655451877-16382-5-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for more sample rates, because PDM format
bitstream has higher sample rates. for example DSD512
format, the bit clock is 22.5792MHz, if the word width
is U8_LE, then the max sample rate is 2822400.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1655451877-16382-4-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to properly bias headset microphones, there should be a pull-up
resistor between pins HBIAS and MIC2P. This can be an external resistor,
but the codec also provides an internal 2.2K resistor which is enabled
by a register.
This patch enables or disables the internal bias resistor based on a
device tree property.
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
[Samuel: split binding and implementation; move to device probe]
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220621035452.60272-3-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The use of pm_runtime_get_sync() is buggy with no use of put_noidle on
error.
Use pm_runtime_resume_and_get() instead.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220616220427.136036-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The use of pm_runtime_get_sync() is buggy with no use of put_noidle() on
error.
Use pm_runtime_resume_and_get() instead.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220616220427.136036-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
simplify the flow. No functionality change, except that on -EACCESS
the reference count will be decreased.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220616220427.136036-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
simplify the flow. No functionality change, except that on -EACCESS
the reference count will be decreased.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220616220427.136036-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
simplify the flow. No functionality change, except that on -EACCESS
the reference count will be decreased.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220616220427.136036-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current code does not check for errors and does not release the
reference on errors.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220616220427.136036-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current code does not check for errors and does not release the
reference on errors.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220616220427.136036-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-96-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-95-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-94-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-93-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-92-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-91-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-90-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-89-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-88-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-87-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-86-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-85-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-84-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-83-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-82-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-81-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-80-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-79-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-78-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-77-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-76-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-75-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-74-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-73-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-72-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-71-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-70-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-69-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-68-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-67-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-66-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-65-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-64-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-63-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-62-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-61-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-60-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-59-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-58-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-57-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-56-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-55-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-54-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-53-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-52-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-51-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-50-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-49-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-48-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-47-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-46-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-45-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-44-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-43-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-42-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-41-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-40-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-39-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-38-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-37-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now all the drivers are updated to have the new legacy_dai_naming
flag, update the core code so it also uses the new flag. Paving
the way for the old non_legacy_dai_naming flag to be removed.
It should be noted this patch will affect the CODEC drivers that don't
specify the non_legacy_dai_naming flag. These drivers will update from
using legacy DAI naming to the new scheme after this patch, this is
being considered a fix as the intention was for all CODEC drivers to use
the new scheme and all existing CODEC drivers were updated to do so
before componentisation. This just corrects those devices that have
snuck in since componentisation. The corrected devices are as
follows:
adau1372, cros_ec_codec, cs35l41, cs35l45, cx2072x, hdac_hda,
jz4725/60/70, lpass-rx/tx/va/wsa-macro, max98504, max9877,
mt6351/58/59, mt6660, pcm3060, rk3328, rt1308/16, rt5514,
rt5677, rt700/11/15, rt9120, sdw-mockup, tlv320adc3xxx, tscs454,
wcd9335/4x/8x, wsa881x
Some of these devices are used in some in kernel machine drivers,
however it appears all the usages use the actual DAI driver name
(since snd_soc_find_dai checks both the DAI name and the DAI driver
name). So it is not believed this change will break any in tree
machine drivers.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-35-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
These drivers appear to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-34-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
This driver appears to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-33-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
These drivers appear to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-32-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
This driver appears to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-31-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
These drivers appear to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-30-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
These drivers appear to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-29-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
These drivers appear to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-28-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
These drivers appear to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-27-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
This driver appears to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-26-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
These drivers appear to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-25-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
This driver appears to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-24-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
These drivers appear to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-23-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
This driver appears to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-22-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
These drivers appear to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-21-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
These drivers appear to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-20-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
These drivers appear to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-19-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
This driver appears to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-18-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
These drivers appear to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-17-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
These drivers appear to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-16-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
These drivers appear to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-15-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
These drivers appear to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-14-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
This driver appears to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-13-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
These drivers appear to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-12-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
These drivers appear to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-11-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
These drivers appear to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-10-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
These drivers appear to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-9-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
These drivers appear to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
This driver appears to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
These drivers appear to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
These drivers appear to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Allow the selection of the TDM slot that is used to send back speaker
monitor data. The DT property adi,spkfb-slot-no can be used to configure
this setting which defaults to 2.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20220624104712.1934484-8-daniel@zonque.org
Signed-off-by: Mark Brown <broonie@kernel.org>
max98396_dai_set_fmt() modifes register 2041 and touches bits in the mask
0x3a. Make sure to use the right mask for that operation.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20220624104712.1934484-7-daniel@zonque.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The device has up to 5 potentially independent power supplies:
AVDD, DVDD, DVVDIO, VBAT and PVDD. The former 3 are mandatory for the
device to function. One of VBAT and PVDD should also be made available.
Regulators are enabled during probe time and will stay active except when in
suspend mode.
Futher, the chip needs to be informed about the presence of VBAT through a
bit in register 0x20a0.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20220624104712.1934484-5-daniel@zonque.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The example in audio-graph-card2.c has multiple nodes with the same name
in it. Change the port numbers to get different names.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220624092601.2445224-1-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Put the SGTL5000 in a silent/safe state on shutdown/remove, this is
required since the SGTL5000 produces a constant noise on its output
after it is configured and its clock is removed. Without this change
this is happening every time the module is unbound/removed or from
reboot till the clock is enabled again.
The issue was experienced on both a Toradex Colibri/Apalis iMX6, but can
be easily reproduced everywhere just playing something on the codec and
after that removing/unbinding the driver.
Fixes: 9b34e6cc3b ("ASoC: Add Freescale SGTL5000 codec support")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20220624101301.441314-1-francesco.dolcini@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
madera_adsp_rate_put always returns zero regardless of if the control
value was updated. This results in missing notifications to user-space
of the control change. Update the handling to return 1 when the
value is changed.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623105120.1981154-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
madera_out1_demux_put returns the value of
snd_soc_dapm_mux_update_power, which returns a 1 if a path was found for
the kcontrol. This is obviously different to the expected return a 1 if
the control was updated value. This results in spurious notifications to
user-space. Update the handling to only return a 1 when the value is
changed.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623105120.1981154-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cs47l15_in1_adc_put always returns zero regardless of if the control
value was updated. This results in missing notifications to user-space
of the control change. Update the handling to return 1 when the value is
changed.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623105120.1981154-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The mixer controls for ASP TX3/4 are set to values that are not included
in their enumeration control. This will cause spurious event
notifications when the controls are first changed, as the register value
changes whilst the actual visible enumeration value does not. Use the
register patch to set them to a known value, zero, which equates to zero
fill, thereby avoiding the spurious notifications.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623105120.1981154-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DAPM keeps a copy of the current value of mux/demux controls,
however this value is only initialised in the case of autodisable
controls. This leads to false notification events when first
modifying a DAPM kcontrol that has a non-zero default.
Autodisable controls are left as they are, since they already
initialise the value, and there would be more work required to
support autodisable muxes where the first option isn't disabled
and/or that isn't the default.
Technically this issue could affect mixer/switch elements as well,
although not on any of the devices I am currently running. There
is also a little more work to do to address the issue there due to
that side supporting stereo controls, so that has not been tackled
in this patch.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623105120.1981154-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The initial settings will be written before the codec probe function.
But, the rt711->component doesn't be assigned yet.
If IO error happened during initial settings operations, it will cause the kernel panic.
This patch changed component->dev to slave->dev to fix this issue.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20220621090719.30558-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We discoverd that the state of BCLK on, LRCLK off and SD_MODE on
may cause the speaker melting issue. Removing LRCLK while BCLK
is present can cause unexpected output behavior including a large
DC output voltage as described in the Max98357a datasheet.
In order to:
1. prevent BCLK from turning on by other component.
2. keep BCLK and LRCLK being present at the same time
This patch switches BCLK to GPIO func before LRCLK output, and
configures BCLK func back during LRCLK is output.
Without this fix, BCLK is turned on 11 ms earlier than LRCK by the
da7219.
With this fix, BCLK is turned on only 0.4 ms earlier than LRCK by
the rockchip codec.
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Link: https://lore.kernel.org/r/20220615045643.3137287-1-judyhsiao@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The IMR was assumed to be preserved when suspending to S4 and S5
states, but community reports invalidate that assumption, the hardware
seems to be powered off and the IMR memory content cleared.
Make sure regular boot with firmware download is used for S4 and S5.
BugLink: https://github.com/thesofproject/sof/issues/5892
Fixes: 5fb5f51185 ("ASoC: SOF: Intel: hda-loader: add IMR restore support")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220616201818.130802-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We currently don't have a means to differentiate between S3, S4 and
S5. Add definitions so that we have select different code paths
depending on the target state in follow-up patches.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220616201818.130802-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code only deals with S0 and S3, let's start adding S1 and S2.
No functional change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220616201818.130802-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 288fad2f71 ("ASoC: SOF: Intel: hda: add quirks for HDAudio DMA position information")
modified the PCM path only, but left the compressed data patch using an
obsolete option.
Move the functionality in a helper that can be called for both PCM and
compressed data.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Fixes: 288fad2f71 ("ASoC: SOF: Intel: hda: add quirks for HDAudio DMA position information")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220616201953.130876-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This should return PTR_ERR() instead of IS_ERR().
Fixes: e0100bfd38 ("ASoC: SOF: mediatek: Add mt8186 ipc support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/YqmWIK8sTj578OJP@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
The "wlf,spkvdd-ena" GPIO needed by the bytcr_wm5102 driver
is made available through a gpio-lookup table.
This gpio-lookup table is registered by drivers/mfd/arizona-spi.c, which
may get probed after the bytcr_wm5102 driver.
If the gpio-lookup table has not registered yet then the gpiod_get()
will return -ENOENT. Treat -ENOENT as -EPROBE_DEFER to still keep
things working in this case.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220612155652.107310-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently wcd938x_*_put() unconditionally report that the value of the
control changed, resulting in spurious events being generated. Return 0 in
that case instead as we should. There is still an issue in the compander
control which is a bit more complex.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220603122526.3914942-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The slimbus mux put operation unconditionally reports a change in value
which means that spurious events are generated. Fix this by exiting early
in that case.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220603124609.4024666-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently in slim_rx_mux_put, an RX channel gets added to a new list
even if it is already in one. This can mess up links and make either
it, the new list head, or both, get linked to the wrong entries.
This can cause an entry to link to itself which in turn ends up
making list_for_each_entry in other functions loop infinitely.
To avoid issues, always remove the RX channel from any list it's in
before adding it to a new list.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/20220606152226.149164-1-y.oudjana@protonmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
prepare callback can be called multiple times, so unprepare the stream
if its already prepared.
Without this DSP is not happy to setting the params on a already
prepared graph.
Fixes: 9b4fe0f1cd ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Reported-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220610144818.511797-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the size checks prior to allocating memory as these checks do not need
the data to be allocated and in case of an error we would not need to free
the allocation.
The max size must not be less than the size of
struct sof_ipc_ctrl_data + struct sof_abi_hdr as the ABI header needs to
be present under all circumstances.
The check was incorrectly used or between the two size checks.
Fixes: b5cee8feb1 ("ASoC: SOF: topology: Make control parsing IPC agnostic")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220610084735.19397-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update the comment for the cl_dsp_init() to clarify what is done by the
function and use the chip->init_core_mask instead of BIT(0) when
unstalling/running the init core.
Complements: 2a68ff8461 ("ASoC: SOF: Intel: hda: Revisit IMR boot sequence")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220609085949.29062-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The hda_dsp_enable_core() is powering up _and_ unstall the core in one
call while the first step of the firmware loading must not unstall the
core.
The core can be unstalled only after the set cpb_cfp and the configuration
of the IPC register for the ROM_CONTROL message.
Complements: 2a68ff8461 ("ASoC: SOF: Intel: hda: Revisit IMR boot sequence")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220609085949.29062-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The hda_dsp_core_power_up() needs to be exposed so that it can be used in
hda-loader.c to correct the boot flow.
The first step must not unstall the core, it should only power up the
core(s).
Add sanity check for the core_mask while exposing it to be safe.
Complements: 2a68ff8461 ("ASoC: SOF: Intel: hda: Revisit IMR boot sequence")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220609085949.29062-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas is the only user of ak4613 on upstream for now, and
commit f28dbaa958 ("ASoC: ak4613: add TDM256 support")
added TDM256 support. Renesas tested part of it, because of
board connection.
It was assuming ak4613 is probed via Audio-Graph-Card, but it
might be probed via Simple-Audio-Card either.
It will indicates WARNING in such case. This patch fixup it.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/87h74v29f7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The .set_jack_detect() codec component callback is invoked during card
registration, which happens when the machine driver is probed.
The issue is that this callback can race with the bus suspend/resume,
and IO timeouts can happen. This can be reproduced very easily if the
machine driver is 'blacklisted' and manually probed after the bus
suspends. The bus and codec need to be re-initialized using pm_runtime
helpers.
Previous contributions tried to make sure accesses to the bus during
the .set_jack_detect() component callback only happen when the bus is
active. This was done by changing the regcache status on a component
remove. This is however a layering violation, the regcache status
should only be modified on device probe, suspend and resume. The
component probe/remove should not modify how the device regcache is
handled. This solution also didn't handle all the possible race
conditions, and the RT700 headset codec was not handled.
This patch tries to resume the codec device before handling the jack
initializations. In case the codec has not yet been initialized,
pm_runtime may not be enabled yet, so we don't squelch the -EACCES
error code and only stop the jack information. When the codec reports
as attached, the jack initialization will proceed as usual.
BugLink: https://github.com/thesofproject/linux/issues/3643
Fixes: 7ad4d237e7 ('ASoC: rt711-sdca: Add RT711 SDCA vendor-specific driver')
Fixes: 899b12542b ('ASoC: rt711: add snd_soc_component remove callback')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220606203752.144159-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The workqueues are initialized in the io_init functions, which isn't
quite right. In some tests, this leads to warnings throw from
__queue_delayed_work()
WARN_ON_FUNCTION_MISMATCH(timer->function, delayed_work_timer_fn);
Move all the initializations to the probe functions.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220606203752.144159-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Realtek headset codec drivers typically check if the card is
instantiated before proceeding with the jack detection.
The rt700, rt711 and rt711-sdca are however missing a check on the
card pointer, which can lead to NULL dereferences encountered in
driver bind/unbind tests.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220606203752.144159-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Follow the same flow as rt711-sdca and initialize all mutexes at probe
time.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220606203752.144159-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the card registration fails, typically because of deferred probes,
the device properties added for headset codecs are not removed, which
leads to kernel oopses in driver bind/unbind tests.
We already clean-up the device properties when the card is removed,
this code can be moved as a helper and called upon card registration
errors.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220606203752.144159-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In codec driver bind/unbind test, the following warning is thrown:
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
...
[ 699.182495] rt711_sdca_jack_init+0x1b/0x1d0 [snd_soc_rt711_sdca]
[ 699.182498] rt711_sdca_set_jack_detect+0x3b/0x90 [snd_soc_rt711_sdca]
[ 699.182500] snd_soc_component_set_jack+0x24/0x50 [snd_soc_core]
A quick check in the code shows that the 'calibrate_mutex' used by
this driver are not initialized at probe time. Moving the
initialization to the probe removes the issue.
BugLink: https://github.com/thesofproject/linux/issues/3644
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220606203752.144159-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When binding/unbinding codec drivers, the following warnings are
thrown:
[ 107.266879] rt715-sdca sdw:3:025d:0714:01: Unbalanced pm_runtime_enable!
[ 306.879700] rt711-sdca sdw:0:025d:0711:01: Unbalanced pm_runtime_enable!
Add a remove callback for all Realtek/Maxim SoundWire codecs and remove this
warning.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220606203752.144159-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the CLSA3541 ACPI device ID used on Valve's Steam Deck.
The driver is fully compatible with the indicated hardware, hence no
additional changes are required.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: David Rhodes <drhodes@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220621213819.262537-1-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'ret'.
This was found by coccicheck:
sound/soc/rockchip/rockchip_i2s.c:810 rockchip_i2s_probe() warn: missing error code 'ret'.
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220624082745.68367-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
A number of patches improving overall quality and readability of
haswell.c and broadwell.c source files found in sound/soc/intel/boards.
Both files are first renamed and only then actual changes are being
incrementally added. The respective names are: hsw_rt5640 and bdw_rt286
to match the pattern found in more recent boards.
Most patches bring no functional change - the more impactful patches at
are placed the end. The last patch is removing of FE DAI ops. Given the
existence of platform FE DAI capabilities (either static declaration or
through topology file), this code is redundant.
Both Behringer UMC 202 HD and 404 HD need explicit quirks to enable
the implicit feedback mode and start the playback stream primarily.
The former seems fixing the stuttering and the latter is required for
a playback-only case.
Note that the "clock source 41 is not valid" error message still
appears even after this fix, but it should be only once at probe.
The reason of the error is still unknown, but this seems to be mostly
harmless as it's a one-off error and the driver retires the clock
setup and it succeeds afterwards.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215934
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220624101132.14528-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tidy up the code a little, rather than repeating the check of
mc->autodisable move the stereo error check to be under the
existing if for mc->autodisable.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623105120.1981154-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_unregister_card() was recently converted to return void. Only
the first instance was adapted, so convert the remaining ones now to fix
building the topology test.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 1892a99188 ("ASoC: core: Make snd_soc_unregister_card() return void")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220622210629.286487-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
bdw_rt286_fe_ops is redundant as platform components already limit the
number of channels available for the endpoint.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-18-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Drop redundant 'ret' assignemnt, stop ignoring set_jack() return value
and reword local 'component' variable to 'codec' to improve readability.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-16-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Declare local 'dev' and make use of it plus dev_get_platdata() to
improve code readability. Relocate few relevant to the function macros
for the exact same read too.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220620101402.2684366-14-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Amadeusz Sławiński