It's right above the drm_dev_put().
This allows us to delete a bit of onion unwinding in
udl_modeset_init().
This is made possible by a preceeding patch which added a drmm_
cleanup action to drm_mode_config_init(), hence all we need to do to
ensure that drm_mode_config_cleanup() is run on final drm_device
cleanup is check the new error code for _init().
v2: Explain why this cleanup is possible (Laurent).
v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-50-daniel.vetter@ffwll.ch
Allows us to drop the drm_driver.release callback from all
drivers, and remove the mipi_dbi_release() function.
This is made possible by a preceeding patch which added a drmm_
cleanup action to drm_mode_config_init(), hence all we need to do to
ensure that drm_mode_config_cleanup() is run on final drm_device
cleanup is check the new error code for _init().
v2: Explain why this cleanup is possible (Laurent).
v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org> (v2)
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: David Lechner <david@lechnology.com>
Cc: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-49-daniel.vetter@ffwll.ch
7/7 drivers agree that's the right choice, let's do this.
This avoids duplicating the same old error checking code over all 7
drivers, which is the motivation here.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: David Lechner <david@lechnology.com>
Cc: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-48-daniel.vetter@ffwll.ch
Allows us to drop the drm_driver.release callback.
This is made possible by a preceeding patch which added a drmm_
cleanup action to drm_mode_config_init(), hence all we need to do to
ensure that drm_mode_config_cleanup() is run on final drm_device
cleanup is check the new error code for _init().
v2: Explain why this cleanup is possible (Laurent).
v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
I also noticed that I've failed to add the error checking,
__must_check caught that.
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org> (v2)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-47-daniel.vetter@ffwll.ch
Instead of having a work item that never stops (which really should be
a kthread), with a dedicated workqueue to not upset anyone else, use a
delayed work. A bunch of changes:
- We can throw out all the custom wakeup and requeue logic and state
tracking. If we schedule the work with a 0 delay it'll get
scheduled immediately.
- Persistent state (frame & draw_status_timeout) need to be moved out
of the work.
- diff is bigger than the changes, biggest chunk is reindenting the
work fn because it lost its while loop.
Lots of code deleting as consequence all over. Specifically we can
delete the drm_driver.release code now!
v2: Review from Hans:
- Use mod_delayed_work in the plane update path to make sure we do
actually schedule immediately). In the worker we still want
queue_delayed_work, which won't modify the timeout when the work is
already scheduled. Which is exactly what we want if the work races
with a plane update.
- Switch to system_long_wq, Hans says on usb2 a plane upload can take
80 ms.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-46-daniel.vetter@ffwll.ch
Also there's a race in the disconnect implemenation. First shut
down, then unplug, leaves a window where userspace could sneak
in and restart the entire machinery.
With this we can also delete the very un-atomic global pipe_enabled
tracking.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-45-daniel.vetter@ffwll.ch
The drm_mode_config_cleanup call we can drop, and all the allocations
we can switch over to drmm_kzalloc. Unfortunately the work queue is
still present, so can't get rid of the drm_driver->release function
outright.
v2: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-43-daniel.vetter@ffwll.ch
It's right above the drm_dev_put().
This is made possible by a preceeding patch which added a drmm_
cleanup action to drm_mode_config_init(), hence all we need to do to
ensure that drm_mode_config_cleanup() is run on final drm_device
cleanup is check the new error code for _init().
Aside: Another driver with a bit much devm_kzalloc, which should
probably use drmm_kzalloc instead ...
I'm pretty sure this one blows up already under KASAN because it's
using devm_drm_dev_init, and later on devm_kzalloc. Hence the memory
will get freed before the final drm_dev_put (all from the devres
code), but the cleanup in that final drm_dev_put will access the just
freed memory.
Unfortunately fixing this properly needs slightly more work, namely
drmm_ versions for all the drm objects (planes, crtc, ...), so that
the cleanup actually happens before even drmm_kzalloc would release
the underlying memory. Not quite there yet.
v2: Explain why this cleanup is possible (Laurent).
v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jyri Sarha <jsarha@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-42-daniel.vetter@ffwll.ch
It's right above the drm_dev_put().
This is made possible by a preceeding patch which added a drmm_
cleanup action to drm_mode_config_init(), hence all we need to do to
ensure that drm_mode_config_cleanup() is run on final drm_device
cleanup is check the new error code for _init().
Aside: Another driver with a bit much devm_kzalloc, which should
probably use drmm_kzalloc instead ...
v2: Explain why this cleanup is possible (Laurent).
v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-41-daniel.vetter@ffwll.ch
It's right above the drm_dev_put().
This is made possible by a preceeding patch which added a drmm_
cleanup action to drm_mode_config_init(), hence all we need to do to
ensure that drm_mode_config_cleanup() is run on final drm_device
cleanup is check the new error code for _init().
Aside: Another driver with a bit much devm_kzalloc, which should
probably use drmm_kzalloc instead ...
v2: Explain why this cleanup is possible (Laurent).
v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> (v2)
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: linux-renesas-soc@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-40-daniel.vetter@ffwll.ch
It's right above the drm_dev_put().
This is made possible by a preceeding patch which added a drmm_
cleanup action to drm_mode_config_init(), hence all we need to do to
ensure that drm_mode_config_cleanup() is run on final drm_device
cleanup is check the new error code for _init().
Aside: Another driver with a bit much devm_kzalloc, which should
probably use drmm_kzalloc instead ...
v2: Explain why this cleanup is possible (Laurent).
v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-39-daniel.vetter@ffwll.ch
It's (almost, there's some iommu stuff without significance) right
above the drm_dev_put().
This is made possible by a preceeding patch which added a drmm_
cleanup action to drm_mode_config_init(), hence all we need to do to
ensure that drm_mode_config_cleanup() is run on final drm_device
cleanup is check the new error code for _init().
Aside: Another driver with a bit much devm_kzalloc, which should
probably use drmm_kzalloc instead ...
v2: Explain why this cleanup is possible (Laurent).
v3: Jump out at the right label (Francesco)
v4: Try again, kbuild caught that I didn't build test this properly
...
v5: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Francesco Lavra <francescolavra.fl@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-38-daniel.vetter@ffwll.ch
It's right above the drm_dev_put().
This is made possible by a preceeding patch which added a drmm_
cleanup action to drm_mode_config_init(), hence all we need to do to
ensure that drm_mode_config_cleanup() is run on final drm_device
cleanup is check the new error code for _init().
Aside: Another driver with a bit much devm_kzalloc, which should
probably use drmm_kzalloc instead ...
v2: Explain why this cleanup is possible (Laurent).
v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> (v2)
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: linux-renesas-soc@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-37-daniel.vetter@ffwll.ch
It's right above the drm_dev_put().
This is made possible by a preceeding patch which added a drmm_
cleanup action to drm_mode_config_init(), hence all we need to do to
ensure that drm_mode_config_cleanup() is run on final drm_device
cleanup is check the new error code for _init().
Aside: This driver gets its devm_ stuff all wrong wrt drm_device and
anything hanging off that. Not the only one unfortunately.
v2: Explain why this cleanup is possible (Laurent).
v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-36-daniel.vetter@ffwll.ch
It's right above the drm_dev_put().
This is made possible by a preceeding patch which added a drmm_
cleanup action to drm_mode_config_init(), hence all we need to do to
ensure that drm_mode_config_cleanup() is run on final drm_device
cleanup is check the new error code for _init().
Aside: This driver gets its devm_ stuff all wrong wrt drm_device and
anything hanging off that. Not the only one unfortunately.
v2: Explain why this cleanup is possible (Laurent).
v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> (v2)
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-35-daniel.vetter@ffwll.ch
Auto-unwind ftw, now possible with the fixed drm_device related
management.
Aside, clk/regulator seem to be missing devm versions for a bunch of
functions, preventing a pile of these simpler drivers from outright
losing their ->remove hook.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-34-daniel.vetter@ffwll.ch
Allows us to drop the drm_driver.release callback.
This is made possible by a preceeding patch which added a drmm_
cleanup action to drm_mode_config_init(), hence all we need to do to
ensure that drm_mode_config_cleanup() is run on final drm_device
cleanup is check the new error code for _init().
v2: Explain why this cleanup is possible (Laurent).
v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org> (v2)
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-33-daniel.vetter@ffwll.ch
Allows us to drop the drm_driver.release callback.
This is made possible by a preceeding patch which added a drmm_
cleanup action to drm_mode_config_init(), hence all we need to do to
ensure that drm_mode_config_cleanup() is run on final drm_device
cleanup is check the new error code for _init().
v2: Explain why this cleanup is possible (Laurent).
v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Paul Cercueil <paul@crapouillou.net> (v2)
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-32-daniel.vetter@ffwll.ch
With the drm_device lifetime fun cleaned up there's nothing in the way
anymore to use devm_ for everything hw releated. Do it, and in the
process, throw out the entire onion unwinding.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: virtualization@lists.linux-foundation.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-31-daniel.vetter@ffwll.ch
We can even delete the drm_driver.release hook now!
This is made possible by a preceeding patch which added a drmm_
cleanup action to drm_mode_config_init(), hence all we need to do to
ensure that drm_mode_config_cleanup() is run on final drm_device
cleanup is check the new error code for _init().
v2: Explain why this cleanup is possible (Laurent).
v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: virtualization@lists.linux-foundation.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-30-daniel.vetter@ffwll.ch
Instead rely on the automatic clean, for which we just need to check
that drm_mode_config_init succeeded. To avoid an inversion in the
cleanup we also have to move the dev_private allocation over to
drmm_kzalloc.
This is made possible by a preceeding patch which added a drmm_
cleanup action to drm_mode_config_init(), hence all we need to do to
ensure that drm_mode_config_cleanup() is run on final drm_device
cleanup is check the new error code for _init().
v2: Explain why this cleanup is possible (Laurent).
v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-29-daniel.vetter@ffwll.ch
Small mistake that crept into
commit 81da8c3b8d
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Tue Feb 11 14:52:18 2020 +0100
drm/bochs: add drm_driver.release callback
where drm_atomic_helper_shutdown was left in both places. The
->release callback really shouldn't touch hardware.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-28-daniel.vetter@ffwll.ch
drm_mode_config_cleanup is idempotent, so no harm in calling this
twice. This allows us to gradually switch drivers over by removing
explicit drm_mode_config_cleanup calls.
With this step it's now also possible that (at least for simple
drivers) automatic resource cleanup can be done correctly without a
drm_driver->release hook. Therefore allow this now in
devm_drm_dev_init().
Also with drmm_ explicit drm_driver->release hooks are kinda not the
best option: Drivers can always just register their current release
hook with drmm_add_action, but even better they could split them up to
simplify the unwinding for the driver load failure case. So deprecate
that hook to discourage future users.
v2: Fixup the example in the kerneldoc too.
v3:
- For paranoia, double check that minor->dev == dev in the release
hook, because I botched the pointer math in the drmm library.
- Call drm_mode_config_cleanup when drmm_add_action fails, we'd be
missing some mutex_destroy and ida_cleanup otherwise (Laurent)
v4: Add a drmm_add_action_or_reset (like devm_ has) to encapsulate this
pattern (Noralf).
v5: Fix oversight in the new drmm_add_action_or_reset macro (Noralf)
v4: Review from Sam:
- drmm_mode_config_init wrapper (also suggested by Thomas)
- improve commit message, explain better why ->relase is deprecated
v5:
- Make drmm_ the main function, with the old one as compat wrapper
(Sam)
- Add FIXME comments to drm_mode_config_cleanup/init() that drivers
shouldn't use these anymore.
- Move drmm_add_action_or_reset helper to an earlier patch.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-27-daniel.vetter@ffwll.ch
Nothing special here, except that this is the first time that we
automatically clean up something that's initialized with an explicit
driver call. But the cleanup was done at the very end of the release
sequence for all drivers, and that's still the case. At least without
more uses of drmm_ through explicit driver calls.
Also for this one we need drmm_kcalloc, so lets add those.
The motivation here is to allow us to remove the explicit calls to
drm_dev_fini() from all drivers.
v2: Sort includes (Laurent)
v3: Motivate the change in the commit message better (Sam)
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-25-daniel.vetter@ffwll.ch
The cleanup here is somewhat tricky, since we can't tell apart the
allocated minor index from 0. So register a cleanup action first, and
if the index allocation fails, unregister that cleanup action again to
avoid bad mistakes.
The kdev for the minor already handles NULL, so no problem there.
Hence add drmm_remove_action() to the drm_managed library.
v2: Make pointer math around void ** consistent with what Laurent
suggested.
v3: Use drmm_add_action_or_reset and remove drmm_remove_action. Noticed
because of some questions from Thomas. This also means we need to move
the drmm_add_action_or_reset helper earlier in the series.
v4: Uh ... fix slightly embarrassing bug CI spotted.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324203936.3330994-1-daniel.vetter@ffwll.ch
Well for the simple stuff at least, vblank, gem and minor cleanup I
want to further split up as a demonstration.
v2: We need to clear drm_device->dev otherwise the debug drm printing
after our cleanup hook (e.g. in drm_manged_release) will chase
released memory and result in a use-after-free. Not really pretty, but
oh well.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-22-daniel.vetter@ffwll.ch
We need to add a drmm_kstrdup for this, but let's start somewhere.
This is not exactly perfect onion unwinding, but it's jsut a kfree so
doesn't really matter at all.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-21-daniel.vetter@ffwll.ch
A few things:
- Update the example driver in the documentation.
- We can drop the old kfree in drm_dev_release.
- Add a WARN_ON check in drm_dev_register to make sure everyone calls
drmm_add_final_kfree and there's no leaks.
v2: Restore the full cleanup, I accidentally left some moved code
behind when fixing the bisectability of the series.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-20-daniel.vetter@ffwll.ch
These are the leftover drivers that didn't have a ->release hook that
needed to be updated.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: "James (Qian) Wang" <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mihail Atanassov <mihail.atanassov@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-19-daniel.vetter@ffwll.ch
With this we can drop the final kfree from the release function.
v2: After drm_dev_init/drmm_add_final_kfree we need to clean up
everything through a drm_dev_put. Rework the unwind code to match
that.
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Tested-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-15-daniel.vetter@ffwll.ch
With this we can drop the final kfree from the release function.
v2: After drm_dev_init/drmm_add_final_kfree we need to clean up
everything through a drm_dev_put. Rework the unwind code to match
that.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-14-daniel.vetter@ffwll.ch
With this we can drop the final kfree from the release function.
v2: Fix unused variable warning, spotted while applying.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-13-daniel.vetter@ffwll.ch
With this we can drop the final kfree from the release function.
I also noticed that the unwind code is wrong, after drm_dev_init the
drm_device owns the v3d allocation, so the kfree(v3d) is a double-free.
Reorder the setup to fix this issue.
After a bit more prep in drivers and drm core v3d should be able to
switch over to devm_drm_dev_init, which should clean this up further.
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-11-daniel.vetter@ffwll.ch
With this we can drop the final kfree from the release function.
I also noticed that cirrus forgot to call drm_dev_fini().
v2: Don't call kfree(cirrus) after we've handed overship of that to
drm_device and the drmm_ stuff.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: virtualization@lists.linux-foundation.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-10-daniel.vetter@ffwll.ch
With this we can drop the final kfree from the release function.
The mock device in the selftests needed it's pci_device split
up from the drm_device. In the future we could simplify this again
by allocating the pci_device as a managed allocation too.
v2: I overlooked that i915_driver_destroy is also called in the
unwind code of the error path. There we need a drm_dev_put.
Similar for the mock object.
Now the problem with that is that the drm_driver->release callbacks
for both the real driver and the mock one assume everything has been
set up. Hence going through that path for a partially set up driver
will result in issues. Quickest fix is to disable the ->release() hook
until the driver is fully initialized, and keep the onion unwinding.
Long term would be cleanest to move everything over to drmm_ release
actions, but that's a lot of work for a big driver like i915. Plus
more core work needed first anyway.
v3: Fix i915_drm pointer wrangling in mock_gem_device. Also switch
over to start using drm_dev_put() to clean up even on the error path.
Aside I think the current error path is leaking the allocation.
v4: more fixes for intel-gfx-ci, some if it damage from v3 :-/
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-9-daniel.vetter@ffwll.ch
With this we can drop the final kfree from the release function.
v2: We need drm_dev_put to unroll the driver creation (once
drm_dev_init and drmm_add_final_kfree suceeded), otherwise
the drmm_ magic doesn't happen.
v3: Actually squash in the fixup (Laurent).
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-7-daniel.vetter@ffwll.ch
They all share mipi_dbi_release so we need to switch them all
together. With this we can drop the final kfree from the release
function.
Aside, I think we could perhaps have a tiny additional helper for
these mipi_dbi drivers, the first few lines around devm_drm_dev_init
are all the same (except for the drm_driver pointer).
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: David Lechner <david@lechnology.com>
Cc: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-6-daniel.vetter@ffwll.ch
I also did a full review of all callers, and only the xen driver
forgot to call drm_dev_put in the failure path. Fix that up too.
v2: I noticed that xen has a drm_driver.release hook, and uses
drm_dev_alloc(). We need to remove the kfree from
xen_drm_drv_release().
bochs also has a release hook, but leaked the drm_device ever since
commit 0a6659bdc5
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Tue Dec 17 18:04:46 2013 +0100
drm/bochs: new driver
This patch here fixes that leak.
Same for virtio, started leaking with
commit b1df3a2b24
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Tue Feb 11 14:58:04 2020 +0100
drm/virtio: add drm_driver.release callback.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: xen-devel@lists.xenproject.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: xen-devel@lists.xenproject.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-5-daniel.vetter@ffwll.ch
We have lots of these. And the cleanup code tends to be of dubious
quality. The biggest wrong pattern is that developers use devm_, which
ties the release action to the underlying struct device, whereas
all the userspace visible stuff attached to a drm_device can long
outlive that one (e.g. after a hotunplug while userspace has open
files and mmap'ed buffers). Give people what they want, but with more
correctness.
Mostly copied from devres.c, with types adjusted to fit drm_device and
a few simplifications - I didn't (yet) copy over everything. Since
the types don't match code sharing looked like a hopeless endeavour.
For now it's only super simplified, no groups, you can't remove
actions (but kfree exists, we'll need that soon). Plus all specific to
drm_device ofc, including the logging. Which I didn't bother to make
compile-time optional, since none of the other drm logging is compile
time optional either.
One tricky bit here is the chicken&egg between allocating your
drm_device structure and initiliazing it with drm_dev_init. For
perfect onion unwinding we'd need to have the action to kfree the
allocation registered before drm_dev_init registers any of its own
release handlers. But drm_dev_init doesn't know where exactly the
drm_device is emebedded into the overall structure, and by the time it
returns it'll all be too late. And forcing drivers to be able clean up
everything except the one kzalloc is silly.
Work around this by having a very special final_kfree pointer. This
also avoids troubles with the list head possibly disappearing from
underneath us when we release all resources attached to the
drm_device.
v2: Do all the kerneldoc at the end, to avoid lots of fairly pointless
shuffling while getting everything into shape.
v3: Add static to add/del_dr (Neil)
Move typo fix to the right patch (Neil)
v4: Enforce contract for drmm_add_final_kfree:
Use ksize() to check that the drm_device is indeed contained somewhere
in the final kfree(). Because we need that or the entire managed
release logic blows up in a pile of use-after-frees. Motivated by a
discussion with Laurent.
v5: Review from Laurent:
- %zu instead of casting size_t
- header guards
- sorting of includes
- guarding of data assignment if we didn't allocate it for a NULL
pointer
- delete spurious newline
- cast void* data parameter correctly in ->release call, no idea how
this even worked before
v6: Review from Sam
- Add the kerneldoc for the managed sub-struct back in, even if it
doesn't show up in the generated html somehow.
- Explain why __always_inline.
- Fix bisectability around the final kfree() in drm_dev_relase(). This
is just interim code which will disappear again.
- Some whitespace polish.
- Add debug output when drmm_add_action or drmm_kmalloc fail.
v7: My bisectability fix wasn't up to par as noticed by smatch.
v8: Remove unecessary {} around if else
v9: Use kstrdup_const, which requires kfree_const and introducing a free_dr()
helper (Thomas).
v10: kfree_const goes boom on the plain "kmalloc" assignment, somehow
we need to wrap that in kstrdup_const() too!! Also renumber revision
log, I somehow reset it midway thruh.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Neil Armstrong <narmstrong@baylibre.com
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324124540.3227396-1-daniel.vetter@ffwll.ch
For two reasons:
- The driver core clears this already for us after we're unloaded in
__device_release_driver().
- It's way too late, the drm_device ->release callback might massively
outlive the underlying physical device, since a drm_device can be
kept alive by open drm_file or well really anything else userspace
is still hanging onto. So if we clear this ourselves, we should
clear it in the pci ->remove callback, not in the drm_device
->release callback.
Looking at git history this was fixed in the driver core with
commit 0998d06310
Author: Hans de Goede <hdegoede@redhat.com>
Date: Wed May 23 00:09:34 2012 +0200
device-core: Ensure drvdata = NULL when no driver is bound
v2: Cite the core fix in the commit message (Chris).
v3: Fix commit message and unused variable warning (Jani).
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-3-daniel.vetter@ffwll.ch
slab does this already, and I want to use this in a memory allocation
tracker in drm for stuff that's tied to the lifetime of a drm_device,
not the underlying struct device. Kinda like devres, but for drm.
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-2-daniel.vetter@ffwll.ch
Daniel Vetter