Optimize and change return path in lookup_free_nid_list
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
We can remove the call to find_get_page to get a page from the cache
and check for up-to-date, instead we can make use of grab_cache_page
part itself to fetch the page from the cache.
So, removing the call and moving the PageUptodate at proper place, also
taken care of moving the lock_page condition in the page_hit part.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The caller of get_nid should be careful not to put lower value than
NODE_DIR1_BLOCK in case of level is zero.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Previously, f2fs reads several node pages ahead when get_dnode_of_data is called
with RDONLY_NODE flag.
And, this flag is set by the following functions.
- get_data_block_ro
- get_lock_data_page
- do_write_data_page
- truncate_blocks
- truncate_hole
However, this readahead mechanism is initially introduced for the use of
get_data_block_ro to enhance the sequential read performance.
So, let's clarify all the cases with the additional modes as follows.
enum {
ALLOC_NODE, /* allocate a new node page if needed */
LOOKUP_NODE, /* look up a node without readahead */
LOOKUP_NODE_RA, /*
* look up a node with readahead called
* by get_datablock_ro.
*/
}
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com>
The get_node_page_ra tries to:
1. grab or read a target node page for the given nid,
2. then, call ra_node_page to read other adjacent node pages in advance.
So, when we try to read a target node page by #1, we should submit bio with
READ_SYNC instead of READA.
And, in #2, READA should be used.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com>
If the node page was truncated, its block address became zero.
This means that we don't need to write the node page, but have to unlock
NODE_WRITE, decrease the number of dirty node pages, and then unlock_page
before returning the f2fs_write_node_page with zero.
Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Use div_u64 to fix overflow when calculating utilization.
*long int* is 4-bytes on 32-bit so (user blocks * 100) might be
overflow if disk size is over e.g. 512GB.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Modify the request_module to prefix the file system type with "fs-"
and add aliases to all of the filesystems that can be built as modules
to match.
A common practice is to build all of the kernel code and leave code
that is not commonly needed as modules, with the result that many
users are exposed to any bug anywhere in the kernel.
Looking for filesystems with a fs- prefix limits the pool of possible
modules that can be loaded by mount to just filesystems trivially
making things safer with no real cost.
Using aliases means user space can control the policy of which
filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf
with blacklist and alias directives. Allowing simple, safe,
well understood work-arounds to known problematic software.
This also addresses a rare but unfortunate problem where the filesystem
name is not the same as it's module name and module auto-loading
would not work. While writing this patch I saw a handful of such
cases. The most significant being autofs that lives in the module
autofs4.
This is relevant to user namespaces because we can reach the request
module in get_fs_type() without having any special permissions, and
people get uncomfortable when a user specified string (in this case
the filesystem type) goes all of the way to request_module.
After having looked at this issue I don't think there is any
particular reason to perform any filtering or permission checks beyond
making it clear in the module request that we want a filesystem
module. The common pattern in the kernel is to call request_module()
without regards to the users permissions. In general all a filesystem
module does once loaded is call register_filesystem() and go to sleep.
Which means there is not much attack surface exposed by loading a
filesytem module unless the filesystem is mounted. In a user
namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT,
which most filesystems do not set today.
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reported-by: Kees Cook <keescook@google.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Pull vfs pile (part one) from Al Viro:
"Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
locking violations, etc.
The most visible changes here are death of FS_REVAL_DOT (replaced with
"has ->d_weak_revalidate()") and a new helper getting from struct file
to inode. Some bits of preparation to xattr method interface changes.
Misc patches by various people sent this cycle *and* ocfs2 fixes from
several cycles ago that should've been upstream right then.
PS: the next vfs pile will be xattr stuff."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
saner proc_get_inode() calling conventions
proc: avoid extra pde_put() in proc_fill_super()
fs: change return values from -EACCES to -EPERM
fs/exec.c: make bprm_mm_init() static
ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
ocfs2: fix possible use-after-free with AIO
ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
target: writev() on single-element vector is pointless
export kernel_write(), convert open-coded instances
fs: encode_fh: return FILEID_INVALID if invalid fid_type
kill f_vfsmnt
vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
nfsd: handle vfs_getattr errors in acl protocol
switch vfs_getattr() to struct path
default SET_PERSONALITY() in linux/elf.h
ceph: prepopulate inodes only when request is aborted
d_hash_and_lookup(): export, switch open-coded instances
9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
9p: split dropping the acls from v9fs_set_create_acl()
...
This patch removes the following build warning:
fs/f2fs/node.c: warning: 'nofs' may be used uninitialized in this function
[-Wuninitialized]: => 738:8
Note that this is a false alarm.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Pull f2fs cleanup patches from Al Viro:
f2fs: get rid of fake on-stack dentries
f2fs: switch init_inode_metadata() to passing parent and name separately
f2fs: switch new_inode_page() from dentry to qstr
f2fs: init_dent_inode() should take qstr
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Conflicts:
fs/f2fs/recovery.c
adding compat_ioctl to provide support for backward comptability - 32bit binary
execution on 64bit kernel.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
In the SSR case, the max gc cost should be the number of pages in a segment.
Otherwise, f2fs is able to fail getting dirty segments frequently for SSR.
In get_victim_by_default() previously,
while(1) {
...
cost = get_gc_cost(); <- cost is between 0 ~ 512.
...
if (cost == get_max_cost(sbi, &p)) <- max cost is UINT_MAX due to GC_CB type
continue;
if (nsearched++ >= MAX_VICTIM_SEARCH)
break;
}
So, if there are a number of fully valid segments in series, f2fs cannot skip
those segments by comparing the cost and max cost of each segment.
Note that, the cost is the number of valid blocks at the time of the last
checkpoint.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch makes clearer the ambiguous f2fs_gc flow as follows.
1. Remove intermediate checkpoint condition during f2fs_gc
(i.e., should_do_checkpoint() and GC_BLOCKED)
2. Remove unnecessary return values of f2fs_gc because of #1.
(i.e., GC_NODE, GC_OK, etc)
3. Simplify write_checkpoint() because of #2.
4. Clarify the main f2fs_gc flow.
o monitor how many freed sections during one iteration of do_garbage_collect().
o do GC more without checkpoints if we can't get enough free sections.
o do checkpoint once we've got enough free sections through forground GCs.
5. Adopt thread-logging (Slack-Space-Recycle) scheme more aggressively on data
log types. See. get_ssr_segement()
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Instead of evaluating the free_sections and then deciding to return
true/false from that path. We can directly use the evaluation condition
for returning proper value.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Introduce accessor to get the sections based upon the block type
(node,dents...) and modify the functions : should_do_checkpoint,
has_not_enough_free_secs to use this accessor function to get
the node sections and dent sections.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
When gc thread creation is failed, mark gc_thread as NULL to avoid
crash while trying to stop invalid thread in stop_gc_thread->kthread_stop.
Instead make it return from:
if (!gc_th)
return;
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Currently GC task is started for each f2fs formatted/mounted device.
But, when we check the task list, using 'ps', there is no distinguishing
factor between the tasks. So, name the task as per the block device just
like the flusher threads.
Also, remove the macro GC_THREAD_NAME and instead use the name: f2fs_gc
to avoid name length truncation, as the command length is 16
-> TASK_COMM_LEN 16 and example name like:
f2fs_gc_task:8:16 -> this exceeds name length
Before Patch for 2 F2FS formatted partitions:
root 28061 0.0 0.0 0 0 ? S 10:31 0:00 [f2fs_gc_task]
root 28087 0.0 0.0 0 0 ? S 10:32 0:00 [f2fs_gc_task]
After Patch:
root 16756 0.0 0.0 0 0 ? S 14:57 0:00 [f2fs_gc-8:18]
root 16765 0.0 0.0 0 0 ? S 14:57 0:00 [f2fs_gc-8:19]
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
1. If f2fs is mounted with background_gc_off option, checking
BG_GC is not redundant.
2. f2fs_balance_fs is checked in f2fs_gc, so this is also redundant.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
F2FS_SET_SB_DIRT is called in inc_page_count and
it is directly called one more time in the next line.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
In f2fs, there are two superblocks. So when the first superblock was
invalidate, it should try to check another.
By Jaegeuk Kim:
o Remove a white space for coding style
o Clean up for code readability
o Fix a typo
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
In some system PAGE_CACHE_SIZE isn't 4K. So using F2FS_BLKSIZE to judge.
By Jaegeuk Kim:
o f2fs does not support no other 4KB page cache size.
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
In file status, it can't distinguish between different devices.
So add device name to do this function.
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
1. Background
Previously, if f2fs tries to move data blocks of an *evicting* inode during the
cleaning process, it stops the process incompletely and then restarts the whole
process, since it needs a locked inode to grab victim data pages in its address
space. In order to get a locked inode, iget_locked() by f2fs_iget() is normally
used, but, it waits if the inode is on freeing.
So, here is a deadlock scenario.
1. f2fs_evict_inode() <- inode "A"
2. f2fs_balance_fs()
3. f2fs_gc()
4. gc_data_segment()
5. f2fs_iget() <- inode "A" too!
If step #1 and #5 treat a same inode "A", step #5 would fall into deadlock since
the inode "A" is on freeing. In order to resolve this, f2fs_iget_nowait() which
skips __wait_on_freeing_inode() was introduced in step #5, and stops f2fs_gc()
to complete f2fs_evict_inode().
1. f2fs_evict_inode() <- inode "A"
2. f2fs_balance_fs()
3. f2fs_gc()
4. gc_data_segment()
5. f2fs_iget_nowait() <- inode "A", then stop f2fs_gc() w/ -ENOENT
2. Problem and Solution
In the above scenario, however, f2fs cannot finish f2fs_evict_inode() only if:
o there are not enough free sections, and
o f2fs_gc() tries to move data blocks of the *evicting* inode repeatedly.
So, the final solution is to use f2fs_iget() and remove f2fs_balance_fs() in
f2fs_evict_inode().
The f2fs_evict_inode() actually truncates all the data and node blocks, which
means that it doesn't produce any dirty node pages accordingly.
So, we don't need to do f2fs_balance_fs() in practical.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Let's remove the use of page_cache_release() in f2fs, and instead, use
f2fs_put_page(page, 0) which is exactly same but for code readability.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
In f2fs_inode_info structure, the description for data_version
has a typo mistake. It should be latest instead of lastes.
So, correcting that.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
We can remove unneeded label unlock_out, avoid unnecessary jump
and reorganize the returning conditions in this function.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
After doing a write_checkpoint from garbage collection path if there is still
need to do more garbage collection, gc_more label is used to jump and start
the process again. And in that process, first step before getting victim is to
check if there are not enough free sections, which is already done before
doing a jump to gc_more. We can avoid the redundant call to check free
sections, by checking the gc_type flag which will remain FG_GC(value 1) under
this condition.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch supports ioctl FIFREEZE and FITHAW to snapshot filesystem.
Before calling f2fs_freeze, all writers would be suspended and sync_fs
would be completed. So no f2fs has to do something.
Just background gc operation should be skipped due to generate dirty
nodes and data until unfreeze.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
For the code
> prev = list_entry(orphan->list.prev, typeof(*prev), list);
if orphan->list.prev == head, it can't get the right prev.
And we can use the parameter 'this' to add.
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
There is a typo in the ->show_options function for disable_ext_identify.
Fix it to match the spelling from the documentation.
Signed-off-by: Alejandro Martinez Ruiz <alex@nowcomputing.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The fill_zero() from fallocate() calls get_new_data_page() in which calls
reserve_new_block().
The reserve_new_block() should be covered by *DATA_NEW*, one of global locks.
And also, before getting the lock, we should check free sections by calling
f2fs_balance_fs().
If we break this rule, f2fs is able to face with out-of-control free space
management and fall into infinite loop like the following scenario as well.
[f2fs_sync_fs()] [fallocate()]
- write_checkpoint() - fill_zero()
- block_operations() - get_new_data_page()
: grab NODE_NEW - get_dnode_of_data()
: get locked dirty node page
- sync_node_pages()
: try to grab NODE_NEW for data allocation
: trylock and skip the dirty node page
: call sync_node_pages() repeatedly in order to flush all the dirty node
pages!
In order to avoid this, we should grab another global lock such as DATA_NEW
before calling get_new_data_page() in fill_zero().
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch enhances the checkpoint routine to cope with IO errors.
Basically f2fs detects IO errors from end_io_write, and the errors are able to
be occurred during one of data, node, and meta page writes.
In the previous code, when an IO error is occurred during writes, f2fs sets a
flag, CP_ERROR_FLAG, in the raw ckeckpoint buffer which will be written to disk.
Afterwards, write_checkpoint() will check the flag and remount f2fs as a
read-only (ro) mode.
However, even once f2fs is remounted as a ro mode, dirty checkpoint pages are
freely able to be written to disk by flusher or kswapd in background.
In such a case, after cold reboot, f2fs would restore the checkpoint data having
CP_ERROR_FLAG, resulting in disabling write_checkpoint and remounting f2fs as
a ro mode again.
Therefore, let's prevent any checkpoint page (meta) writes once an IO error is
occurred, and remount f2fs as a ro mode right away at that moment.
Reported-by: Oliver Winker <oliver@oli1170.net>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com>
This patch stores inode->i_rdev into on-disk inode structure.
Alun reported that:
aspire tmp # mount -t f2fs /dev/sdb mnt
aspire tmp # mknod mnt/sda1 b 8 1
aspire tmp # mknod mnt/null c 1 3
aspire tmp # mknod mnt/console c 5 1
aspire tmp # ls -l mnt
total 2
crw-r--r-- 1 root root 5, 1 Jan 22 18:44 console
crw-r--r-- 1 root root 1, 3 Jan 22 18:44 null
brw-r--r-- 1 root root 8, 1 Jan 22 18:44 sda1
aspire tmp # umount mnt
aspire tmp # mount -t f2fs /dev/sdb mnt
aspire tmp # ls -l mnt
total 2
crw-r--r-- 1 root root 0, 0 Jan 22 18:44 console
crw-r--r-- 1 root root 0, 0 Jan 22 18:44 null
brw-r--r-- 1 root root 0, 0 Jan 22 18:44 sda1
In this report, f2fs lost the major/minor numbers of device files after umount.
The reason was revealed that f2fs does not store the inode->i_rdev to the
on-disk inode data structure.
So, as the other file systems do, f2fs also stores i_rdev into the i_addr fields
in on-disk inode structure without any on-disk layout changes.
Note that, this bug is limited to device files made by mknod().
Reported-and-Tested-by: Alun Jones <alun.linux@ty-penguin.org.uk>
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
... sure, it's tempting to just pass dentry. Except that we don't
_have_ anything resembling a real dentry on one of the paths to it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
for one thing, it doesn't (and shouldn't) use anything else from dentry;
for another, on some call chains the dentry is fake and should
be eliminated completely.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This is calling list_del() inside a loop which is a problem when we try
move to the next item on the list. I've converted it to use the _safe
version. And also, as a cleanup, I've converted it to use
list_for_each_entry instead of list_for_each.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The caller of start_bidx_of_node() should give proper node offsets which
point only direct node blocks. Otherwise, it is a caller's bug.
This patch adds comments to make it clear.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
If some small bios of dirty node pages are supposed to be issued during the
sequential data writes, there-in well-produced consecutive data bios are able
to be split by the small node bios, resulting in performance degradation.
So, let's collect a number of dirty node pages until reaching a threshold.
And, by default, I set the threshold as 2MB, a segment size.
This improves sequential write performance on i5, 512GB SSD (830 w/ SATA2) as
follows.
Before: 231 MB/s -> After: 255 MB/s
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com>
This patch adds f2fs_bmap operation to the data address space.
This enables f2fs to support swapfile.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This was added for all the file systems before.
See the following commit.
commit id: 0b173bc4da
[PATCH] mm: kill vma flag VM_CAN_NONLINEAR
This patch moves actual ptes filling for non-linear file mappings
into special vma operation: ->remap_pages().
File system must implement this method to get non-linear mappings support,
if it uses filemap_fault() then generic_file_remap_pages() can be used.
Now device drivers can implement this method and obtain nonlinear vma support."
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Add __init to functions in init_f2fs_fs for code consistency.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
As the "status" debugfs entry will be maintained for entire F2FS filesystem
irrespective of the number of partitions.
So, we can move the initialization to the init part of the f2fs and destroy will
be done from exit part. After making changes, for individual partition mount -
entry creation code will not be executed.
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
There is an race condition between umounting f2fs and reading f2fs/status, which
results in oops.
Fox example:
Thread A Thread B
umount f2fs cat f2fs/status
f2fs_destroy_stats() { stat_show() {
list_for_each_entry_safe(&f2fs_stat_list)
list_del(&si->stat_list);
mutex_lock(&si->stat_lock);
si->sbi = NULL;
mutex_unlock(&si->stat_lock);
kfree(sbi->stat_info);
} mutex_lock(&si->stat_lock) <- si is gone.
...
}
Solution with a global lock: f2fs_stat_mutex:
Thread A Thread B
umount f2fs cat f2fs/status
f2fs_destroy_stats() { stat_show() {
mutex_lock(&f2fs_stat_mutex);
list_del(&si->stat_list);
mutex_unlock(&f2fs_stat_mutex);
kfree(sbi->stat_info); mutex_lock(&f2fs_stat_mutex);
} list_for_each_entry_safe(&f2fs_stat_list)
...
mutex_unlock(&f2fs_stat_mutex);
}
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
[jaegeuk.kim@samsung.com: fix typos, description, and remove the existing lock]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Let's consider the usage of blk_plug in f2fs_write_data_pages().
We can come up with the two issues: lock contention and task awareness.
1. Merging bios prior to grabing "queue lock"
The f2fs merges consecutive IOs in the file system level before
submitting any bios, which is similar with the back merge by the
plugging mechanism in attempt_plug_merge(). Both of them need to acquire
no queue lock.
2. Merging policy with respect to tasks
The f2fs merges IOs as much as possible regardless of tasks, while
blk-plugging is conducted on a basis of tasks. As we can understand
there are trade-offs, f2fs tries to maximize the write performance with
well-merged bios.
As a result, if f2fs produces many consecutive but separated bios in
writepages(), it would be good to use blk-plugging since f2fs would be
able to avoid queue lock contention in the block layer by merging them.
But, f2fs merges IOs and submit one bio, which means that there are not
much chances to merge bios by attempt_plug_merge().
However, f2fs has already been used blk_plug by triggering generic_writepages()
in f2fs_write_data_pages().
So to make the overall code consistency, I'd like to remove blk_plug there.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
In call to f2fs_delete_entry, 'dir' time modification code is put
at two places.
So, remove the redundant code for timing update.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Since, f2fs supports only 4KB blocksize, which is set at the beginning in
f2fs_fill_super. So, we do not need to again check this blocksize setting
in such case.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The f2fs_fallocate() has two operations: punch_hole and expand_size.
Only in the case of punch_hole, dirty node pages can be produced, so let's
trigger f2fs_balance_fs() in this case only.
Furthermore, let's trigger it at every data truncation routine.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The f2fs_balance_fs() is to check the number of free sections and decide whether
it needs to conduct cleaning or not. If there are not enough free sections, the
cleaning job should be started.
In order to control an amount of free sections even under high utilization, f2fs
should call f2fs_balance_fs at all the VFS interfaces that are able to produce
dirty pages.
This patch adds the function calls in the missing interfaces as follows.
1. f2fs_setxattr()
The f2fs_setxattr() produces dirty node pages so that we should call
f2fs_balance_fs() either likewise doing in other VFS interfaces such as
f2fs_lookup(), f2fs_mkdir(), and so on.
2. f2fs_sync_file()
We should guarantee serving free sections for syncing metadata during fsync.
Previously, there is no space check before triggering checkpoint and
sync_node_pages.
Therefore, if a bunch of fsync calls are triggered under 100% of FS utilization,
f2fs is able to be faced with no free sections, resulting in BUG_ON().
3. f2fs_sync_fs()
Before calling write_checkpoint(), we should guarantee that there are minimum
free sections.
4. f2fs_write_inode()
f2fs_write_inode() is also able to produce dirty node pages.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
I'd like to revisit the f2fs_gc flow and rewrite as follows.
1. In practical, the nGC parameter of f2fs_gc is meaningless. So, let's
remove it.
2. Background GC marks victim blocks as dirty one at a time.
3. Foreground GC should do cleaning job until acquiring enough free
sections. Afterwards, it needs to do checkpoint.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch resolves Coverity #753102:
>>> No check of the return value of "f2fs_add_link(&dent, inode)".
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch resolves Coverity #753112.
In practical, the existing code flow does not fall into the reported errorneous
path. But, anyway, let's avoid this for future.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Update partition info output under debug FS to reflect segment layout correctly.
Signed-off-by: Huajun Li <huajun.li.lee@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
While creating a new entry for addition to the list(orphan inode list
and fsync inode entry list), there is no need to call HEAD initialization
for these entries. So, remove that init part.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
After doing a punch hole or expanding inode doing fallocation.
The change and modification time are not update for the file.
So, update time after no issue is observed in fallocate.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Introduced f2fs_msg function to differentiate f2fs specific messages in
the log. And, added few informative prints in the mount path, to convey
proper error in case of mount failure.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch-set includes two major bug fixes:
- incorrect IUsed provided by *df -i*, and
- lookup failure of parent inodes in corner cases.
[Other Bug Fixes]
- Fix error handling routines
- Trigger recovery process correctly
- Resolve build failures due to missing header files
[Etc]
- Add a MAINTAINERS entry for f2fs
- Fix and clean up variables, functions, and equations
- Avoid warnings during compilation
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=dH3T
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs bug fixes from Jaegeuk Kim:
"This patch-set includes two major bug fixes:
- incorrect IUsed provided by *df -i*, and
- lookup failure of parent inodes in corner cases.
[Other Bug Fixes]
- Fix error handling routines
- Trigger recovery process correctly
- Resolve build failures due to missing header files
[Etc]
- Add a MAINTAINERS entry for f2fs
- Fix and clean up variables, functions, and equations
- Avoid warnings during compilation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: unify string length declarations and usage
f2fs: clean up unused variables and return values
f2fs: clean up the start_bidx_of_node function
f2fs: remove unneeded variable from f2fs_sync_fs
f2fs: fix fsync_inode list addition logic and avoid invalid access to memory
f2fs: remove unneeded initialization of nr_dirty in dirty_seglist_info
f2fs: handle error from f2fs_iget_nowait
f2fs: fix equation of has_not_enough_free_secs()
f2fs: add MAINTAINERS entry
f2fs: return a default value for non-void function
f2fs: invalidate the node page if allocation is failed
f2fs: add missing #include <linux/prefetch.h>
f2fs: do f2fs_balance_fs in front of dir operations
f2fs: should recover orphan and fsync data
f2fs: fix handling errors got by f2fs_write_inode
f2fs: fix up f2fs_get_parent issue to retrieve correct parent inode number
f2fs: fix wrong calculation on f_files in statfs
f2fs: remove set_page_dirty for atomic f2fs_end_io_write
This patch is intended to unify string length declarations and usage.
There are number of calls to strlen which return size_t object.
The size of this object depends on compiler if it will be bigger,
equal or even smaller than an unsigned int
Signed-off-by: Leon Romanovsky <leon@leon.nu>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch also resolves the following warning reported by kbuild test robot.
fs/f2fs/gc.c: In function 'start_bidx_of_node':
fs/f2fs/gc.c:453:21: warning: 'bidx' may be used uninitialized in this function
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
We can directly return '0' from the function, instead of introducing a
'ret' variable.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
In function find_fsync_dnodes() - the fsync inodes gets added to the list, but
in one path suppose f2fs_iget results in error, in such case - error gets added
to the fsync inode list.
In next call to recover_data()->get_fsync_inode()
entry = list_entry(this, struct fsync_inode_entry, list);
if (entry->inode->i_ino == ino)
This can result in "invalid access to memory" when it encounters 'error' as
entry in the fsync inode list.
So, add the fsync inode entry to the list only in case of no errors.
And, free the object at that point itself in case of issue.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Since, the memory for the object of dirty_seglist_info is allocated
using kzalloc - which returns zeroed out memory. So, there is no need
to initialize the nr_dirty values with zeroes.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
In case f2fs_iget_nowait returns error, it results in truncate_hole being
called with 'error' value as inode pointer. There is no check in truncate_hole
for valid inode, so it could result in crash due "invalid access to memory".
Avoid this by handling error condition properly.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Practically, has_not_enough_free_secs() should calculate with the numbers of
current node and directory data blocks together.
Actually the equation was implemented in need_to_flush().
So, this patch removes need_flush() and moves the equation into
has_not_enough_free_secs().
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch resolves a build warning reported by kbuild test robot.
"
fs/f2fs/segment.c: In function '__get_segment_type':
fs/f2fs/segment.c:806:1: warning: control reaches end of non-void
function [-Wreturn-type]
"
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The new_node_page() is processed as the following procedure.
1. A new node page is allocated.
2. Set PageUptodate with proper footer information.
3. Check if there is a free space for allocation
4.a. If there is no space, f2fs returns with -ENOSPC.
4.b. Otherwise, go next.
In the case of step #4.a, f2fs remains a wrong node page in the page cache
with the uptodate flag.
Also, even though a new node page is allocated successfully, an error can be
occurred afterwards due to allocation failure of the other data structures.
In such a case, remove_inode_page() would be triggered, so that we have to
clear uptodate flag in truncate_node() too.
So, we should remove the uptodate flag, if allocation is failed.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
m68k allmodconfig:
fs/f2fs/data.c: In function ‘read_end_io’:
fs/f2fs/data.c:311: error: implicit declaration of function ‘prefetchw’
fs/f2fs/segment.c: In function ‘f2fs_end_io_write’:
fs/f2fs/segment.c:628: error: implicit declaration of function ‘prefetchw’
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
With user namespaces enabled building f2fs fails with:
CC fs/f2fs/acl.o
fs/f2fs/acl.c: In function ‘f2fs_acl_from_disk’:
fs/f2fs/acl.c:85:21: error: ‘struct posix_acl_entry’ has no member named ‘e_id’
make[2]: *** [fs/f2fs/acl.o] Error 1
make[2]: Target `__build' not remade because of errors.
e_id is a backwards compatibility field only used for file systems
that haven't been converted to use kuids and kgids. When the posix
acl tag field is neither ACL_USER nor ACL_GROUP assigning e_id is
unnecessary. Remove the assignment so f2fs will build with user
namespaces enabled.
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Amit Sahrawat <a.sahrawat@samsung.com>
Acked-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
In order to conserve free sections to deal with the worst-case scenarios, f2fs
should be able to freeze all the directory operations especially when there are
not enough free sections. The f2fs_balance_fs() is for this use.
When FS utilization becomes almost 100%, directory operations can be failed due
to -ENOSPC frequently, which produces some dirty node pages occasionally.
Previously, in such a case, f2fs_balance_fs() is not able to be triggered since
it is triggered only if the directory operation ends up with success.
So, this patch triggers f2fs_balance_fs() at first before handling directory
operations.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Ruslan reported that f2fs hangs with an infinite loop in f2fs_sync_file():
while (sync_node_pages(sbi, inode->i_ino, &wbc) == 0)
f2fs_write_inode(inode, NULL);
The reason was revealed that the cold flag is not set even thought this inode is
a normal file. Therefore, sync_node_pages() skips to write node blocks since it
only writes cold node blocks.
The cold flag is stored to the node_footer in node block, and whenever a new
node page is allocated, it is set according to its file type, file or directory.
But, after sudden-power-off, when recovering the inode page, f2fs doesn't recover
its cold flag.
So, let's assign the cold flag in more right places.
One more thing:
If f2fs_write_inode() returns an error due to whatever situations, there would
be no dirty node pages so that sync_node_pages() returns zero.
(i.e., zero means nothing was written.)
Reported-by: Ruslan N. Marchenko <me@ruff.mobi>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Test Case:
[NFS Client]
ls -lR .
[NFS Server]
while [ 1 ]
do
echo 3 > /proc/sys/vm/drop_caches
done
Error on NFS Client: "No such file or directory"
When cache is dropped at the server, it results in lookup failure at the
NFS client due to non-connection with the parent. The default path is it
initiates a lookup by calculating the hash value for the name, even though
the hash values stored on the disk for "." and ".." is maintained as zero,
which results in failure from find_in_block due to not matching HASH values.
Fix up, by using the correct hashing values for these entries.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
In f2fs_statfs(), f_files should be the total number of available inodes
instead of the currently allocated inodes.
So, this patch should resolve the reported bug below.
Note that, showing 10% usage is not a bug, since f2fs reveals whole volume size
as much as possible and shows the space overhead as *used*.
This policy is fair enough with respect to other file systems.
<Reported Bug>
(loop0 is backed by 1GiB file)
$ mkfs.f2fs /dev/loop0
F2FS-tools: Ver: 1.1.0 (2012-12-11)
Info: sector size = 512
Info: total sectors = 2097152 (in 512bytes)
Info: zone aligned segment0 blkaddr: 512
Info: format successful
$ mount /dev/loop0 mnt/
$ df mnt/
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/loop0 1046528 98312 929784 10%
/home/zeta/linux-devel/mtd-bench/mnt
$ df mnt/ -i
Filesystem Inodes IUsed IFree IUse% Mounted on
/dev/loop0 1 -465918 465919 - /home/zeta/linux-devel/mtd-bench/mnt
Notice IUsed is negative. Also, 10% usage on a fresh f2fs seems too
much to be correct.
Reported-and-Tested-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
We should guarantee not to do *scheduling while atomic*.
I found, in atomic f2fs_end_io_write(), there is a set_page_dirty() call
to deal with IO errors.
But, set_page_dirty() calls:
-> f2fs_set_data_page_dirty()
-> set_dirty_dir_page()
-> cond_resched() which results in scheduling.
In order to avoid this, I'd like to remove simply set_page_dirty(),
since the page is already marked as ERROR and f2fs will be operated
as the read-only mode as well.
So, there is no recovery issue with this.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Previously, f2fs didn't track the parent inode number correctly which is stored
in each f2fs_inode. In the case of the following scenario, a bug can be occured.
Let's suppose there are one directory, "/b", and two files, "/a" and "/b/a".
- pino of "/a" is ROOT_INO.
- pino of "/b/a" is DIR_B_INO.
Then,
# sync
: The inode pages of "/a" and "/b/a" contain the parent inode numbers as
ROOT_INO and DIR_B_INO respectively.
# mv /a /b/a
: The parent inode number of "/a" should be changed to DIR_B_INO, but f2fs
didn't do that. Ref. f2fs_set_link().
In order to fix this clearly, I added i_pino in f2fs_inode_info, and whenever
it needs to be changed like in f2fs_add_link() and f2fs_set_link(), it is
updated temporarily in f2fs_inode_info.
And later, f2fs_write_inode() stores the latest information to the inode pages.
For power-off-recovery, f2fs_sync_file() triggers simply f2fs_write_inode().
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Do cleanup more for better code readability.
- Change the parameter set of f2fs_bio_alloc()
This function should allocate a bio only since it is not something like
f2fs_bio_init(). Instead, the caller should initialize the allocated bio.
- Introduce SECTOR_FROM_BLOCK
This macro translates a block address to its sector address.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com>
Simplify code by providing the accessor macro to retrieve the
number of dentry slots for a given filename length.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Since, we anyway need to put the page after deleting entry. So, there is no
need to make same call under different conditions.
Move out the f2fs_put_page from the two conditions and call at once.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Since, GFP_NOFS and __GFP_ZERO is being used to set gfp_mask.
We can instead make use of already predefined macro GFP_F2FS_ZERO.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Since, GFP_NOFS(__GFP_WAIT) is used for allocation requests of bio in f2fs.
So, there is no chance of returning NULL from the BIO allocation.
Making the bio allocation routine for f2fs simpler.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
The variables node_page and page_offset are initialized but never used
otherwise, so remove those unused variables.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
In function f2fs_mkdir, err is being initialized without even checking
if there was any error in new inode creation. So, instead check the
inode error and make use of error/return condition.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
No need to initialize "struct f2fs_gc_kthread *gc_th = NULL",
as gc_th = NULL, will be taken care by the return values of kmalloc().
And fix codes in other places.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
If the filesystem is mounted as read-only then return from that point itself
instead of first doing a writeout/wait and then checking for read-only
condition.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Since, __GFP_ZERO is used while f2fs inode allocation, so we do not
need memset for f2fs_inode_info, as this is already zeroed out.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
print the invalid argument/value from parse_options in case of
mount failure.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
When CONFIG_CC_OPTIMIZE_FOR_SIZE is enabled in the kernel, -Os optimisation
flag is passed to gcc for compilation, and somehow while trying to optimize
the code, compiler is might not able to see the initialisation of variable
ne struct variable inside the get_node_info() function and results into
following warning:
fs/f2fs/node.c: In function 'get_node_info':
fs/f2fs/node.c:175:3: warning: 'ne.block_addr' may be used uninitialized in
this function [-Wuninitialized]
fs/f2fs/node.c:265:24: note: 'ne.block_addr' was declared here
fs/f2fs/node.c:176:3: warning: 'ne.ino' may be used uninitialized in this
function [-Wuninitialized]
fs/f2fs/node.c:265:24: note: 'ne.ino' was declared here
fs/f2fs/node.c:177:3: warning: 'ne.version' may be used uninitialized in
this function [-Wuninitialized]
fs/f2fs/node.c:265:24: note: 'ne.version' was declared here
Hence, lets initialise the ne struct variable to zero, which will remove
this warning and also doing this does not seems to making any impact on the
code behavior.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com>
There exist two build failures reported by Randy Dunlap as follows.
(on i386)
a. (config-r8857)
ERROR: "f2fs_xattr_advise_handler" [fs/f2fs/f2fs.ko] undefined!
Key configs in (config-r8857) are as follows.
CONFIG_F2FS_FS=m
# CONFIG_F2FS_STAT_FS is not set
CONFIG_F2FS_FS_XATTR=y
# CONFIG_F2FS_FS_POSIX_ACL is not set
The error was occurred due to the function location that we made a mistake.
Recently we added a new functionality for users to indicate cold files
explicitly through xattr operations (i.e., f2fs_xattr_advise_handler).
This handler should have been added in xattr.c instead of acl.c in order
to avoid an undefined operation like in this case where XATTR is set and
ACL is not set.
b. (config-r8855)
fs/f2fs/file.c: In function 'f2fs_vm_page_mkwrite':
fs/f2fs/file.c:97:2: error: implicit declaration of function
'block_page_mkwrite_return'
Key config in (config-r8855) is CONFIG_BLOCK.
Obviously, f2fs works on top of the block device so that we should consider
carefully a sort of config dependencies.
The reason why this error was occurred was that f2fs_vm_page_mkwrite() calls
block_page_mkwrite_return() which is enalbed only if CONFIG_BLOCK is set.
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
As pointed out by Randy Dunlap, this patch removes all usage of "/**" for comment
blocks. Instead, just use "/*".
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch should resolve the bugs reported by the sparse tool.
Initial reports were written by "kbuild test robot" managed by fengguang.wu.
In my local machines, I've tested also by running:
> make C=2 CF="-D__CHECK_ENDIAN__"
Accordingly, I've found lots of warnings and bugs related to the endian
conversion. And I've fixed all at this moment.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This adds Makefile and Kconfig for f2fs, and updates Makefile and Kconfig files
in the fs directory.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This moves all of the f2fs debugging files into debugfs. The files are
located in /sys/kernel/debug/f2fs/
Note, I think we are generating all of the same information in each of
the files for every unique f2fs filesystem in the machine. This copies
the functionality that was present in the proc files, but this should be
fixed up in the future.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[jaegeuk.kim@samsung.com: merged 3 debugfs entries into a *status* entry]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This adds roll-forward routines to recover fsynced data.
- F2FS uses basically roll-back model with checkpointing.
- In order to implement fsync(), there are two approaches as follows.
1. A roll-back model with checkpointing at every fsync()
: This is a naive method, but suffers from very low performance.
2. A roll-forward model
: F2FS adopts this model where all the fsynced data should be recovered, which
were written after checkpointing was done. In order to figure out the data,
F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains
the location of next node block in each direct node block for reconstructing
the chain of node blocks during the recovery.
- In order to enhance the performance, F2FS keeps a "dentry" mark also in direct
node blocks. If this is set during the recovery, F2FS replays adding a dentry.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This adds on-demand and background cleaning functions.
- The basic background cleaning policy is trying to do cleaning jobs as much as
possible whenever the system is idle. Once the background cleaning is done,
the cleaner sleeps an amount of time not to interfere with VFS calls. The time
is dynamically adjusted according to the status of whole segments, which is
decreased when the following conditions are satisfied.
. GC is not conducted currently, and
. IO subsystem is idle by checking the number of requets in bdev's request
list, and
. There are enough dirty segments.
Otherwise, the time is increased incrementally until to the maximum time.
Note that, min and max times are 10 secs and 30 secs by default.
- F2FS adopts a default victim selection policy where background cleaning uses
a cost-benefit algorithm, while on-demand cleaning uses a greedy algorithm.
- The method of moving data during the cleaning is slightly different between
background and on-demand cleaning schemes. In the case of background cleaning,
F2FS loads the data, and marks them as dirty. Then, F2FS expects that the data
will be moved by flusher or VM. In the case of on-demand cleaning, F2FS should
move the data right away.
- In order to identify valid blocks in a victim segment, F2FS scans the bitmap
of the segment managed as an SIT entry.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This implements xattr and acl functionalities.
- F2FS uses a node page to contain use extended attributes.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This adds inode operations for directory, symlink, and special inodes.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This adds core functions to get, read, write, and evict an inode.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This adds address space operations for data.
- F2FS supports readpages(), writepages(), and direct_IO().
- Because of out-of-place writes, f2fs_direct_IO() does not write data in place.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This adds memory operations and file/file_inode operations.
- F2FS supports fallocate(), mmap(), fsync(), and basic ioctl().
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This adds specific functions not only to manage dirty/free segments, SIT pages,
a cache for SIT entries, and summary entries, but also to allocate free blocks
and write three types of pages: data, node, and meta.
- F2FS maintains three types of bitmaps in memory, which indicate free, prefree,
and dirty segments respectively.
- The key information of an SIT entry consists of a segment number, the number
of valid blocks in the segment, a bitmap to identify there-in valid or invalid
blocks.
- An SIT page is composed of a certain range of SIT entries, which is maintained
by the address space of meta_inode.
- To cache SIT entries, a simple array is used. The index for the array is the
segment number.
- A summary entry for data contains the parent node information. A summary entry
for node contains its node offset from the inode.
- F2FS manages information about six active logs and those summary entries in
memory. Whenever one of them is changed, its summary entries are flushed to
its SIT page maintained by the address space of meta_inode.
- This patch adds a default block allocation function which supports heap-based
allocation policy.
- This patch adds core functions to write data, node, and meta pages. Since LFS
basically produces a series of sequential writes, F2FS merges sequential bios
with a single one as much as possible to reduce the IO scheduling overhead.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This adds functions required by the checkpoint operations.
Basically, f2fs adopts a roll-back model with checkpoint blocks written in the
CP area. The checkpoint procedure includes as follows.
- write_checkpoint()
1. block_operations() freezes VFS calls.
2. submit cached bios.
3. flush_nat_entries() writes NAT pages updated by dirty NAT entries.
4. flush_sit_entries() writes SIT pages updated by dirty SIT entries.
5. do_checkpoint() writes,
- checkpoint block (#0)
- orphan inode blocks
- summary blocks made by active logs
- checkpoint block (copy of #0)
6. unblock_opeations()
In order to provide an address space for meta pages, f2fs_sb_info has a special
inode, namely meta_inode. This patch also adds the address space operations for
meta_inode.
Signed-off-by: Chul Lee <chur.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This adds the implementation of superblock operations for f2fs, which includes
- init_f2fs_fs/exit_f2fs_fs
- f2fs_mount
- super_operations of f2fs
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This adds the following major in-memory structures in f2fs.
- f2fs_sb_info:
contains f2fs-specific information, two special inode pointers for node and
meta address spaces, and orphan inode management.
- f2fs_inode_info:
contains vfs_inode and other fs-specific information.
- f2fs_nm_info:
contains node manager information such as NAT entry cache, free nid list,
and NAT page management.
- f2fs_node_info:
represents a node as node id, inode number, block address, and its version.
- f2fs_sm_info:
contains segment manager information such as SIT entry cache, free segment
map, current active logs, dirty segment management, and segment utilization.
The specific structures are sit_info, free_segmap_info, dirty_seglist_info,
curseg_info.
In addition, add F2FS_SUPER_MAGIC in magic.h.
Signed-off-by: Chul Lee <chur.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Namjae Jeon