The TWT Information Frame Disabled bit of control field of TWT Setup
frame shall be set to 1 since handling TWT Information frame is not
supported by current mac80211 implementation.
Fixes: f5a4c24e68 ("mac80211: introduce individual TWT support in AP mode")
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Link: https://lore.kernel.org/r/20221027015653.1448-1-howard-yh.hsu@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When trying to transmit an data frame with tx_status to a destination
that have no route in the mesh, then it is dropped without recrediting
the ack_status_frames idr.
Once it is exhausted, wpa_supplicant starts failing to do SAE with
NL80211_CMD_FRAME and logs "nl80211: Frame command failed".
Use ieee80211_free_txskb() instead of kfree_skb() to fix it.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Link: https://lore.kernel.org/r/20221027140133.1504-1-nicolas.cavallari@green-communications.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When device is running and the interface status is changed, the gpf issue
is triggered. The problem triggering process is as follows:
Thread A: Thread B
ieee80211_runtime_change_iftype() process_one_work()
... ...
ieee80211_do_stop() ...
... ...
sdata->bss = NULL ...
... ieee80211_subif_start_xmit()
ieee80211_multicast_to_unicast
//!sdata->bss->multicast_to_unicast
cause gpf issue
When the interface status is changed, the sending queue continues to send
packets. After the bss is set to NULL, the bss is accessed. As a result,
this causes a general-protection-fault issue.
The following is the stack information:
general protection fault, probably for non-canonical address
0xdffffc000000002f: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000178-0x000000000000017f]
Workqueue: mld mld_ifc_work
RIP: 0010:ieee80211_subif_start_xmit+0x25b/0x1310
Call Trace:
<TASK>
dev_hard_start_xmit+0x1be/0x990
__dev_queue_xmit+0x2c9a/0x3b60
ip6_finish_output2+0xf92/0x1520
ip6_finish_output+0x6af/0x11e0
ip6_output+0x1ed/0x540
mld_sendpack+0xa09/0xe70
mld_ifc_work+0x71c/0xdb0
process_one_work+0x9bf/0x1710
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
</TASK>
Fixes: f856373e2f ("wifi: mac80211: do not wake queues on a vif that is being stopped")
Reported-by: syzbot+c6e8fca81c294fd5620a@syzkaller.appspotmail.com
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221026063959.177813-1-shaozhengchao@huawei.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Now that the 32bit UP oddity is gone and 32bit uses always a sequence
count, there is no need for the fetch_irq() variants anymore.
Convert to the regular interface.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
First set of patches v6.2. mac80211 refactoring continues for Wi-Fi 7.
All mac80211 driver are now converted to use internal TX queues, this
might cause some regressions so we wanted to do this early in the
cycle.
Note: wireless tree was merged[1] to wireless-next to avoid some
conflicts with mac80211 patches between the trees. Unfortunately there
are still two smaller conflicts in net/mac80211/util.c which Stephen
also reported[2]. In the first conflict initialise scratch_len to
"params->scratch_len ?: 3 * params->len" (note number 3, not 2!) and
in the second conflict take the version which uses elems->scratch_pos.
Git diff output should like this:
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@@ -1506,7 -1648,7 +1650,7 @@@ ieee802_11_parse_elems_full(struct ieee
const struct element *non_inherit = NULL;
u8 *nontransmitted_profile;
int nontransmitted_profile_len = 0;
- size_t scratch_len = params->len;
- size_t scratch_len = params->scratch_len ?: 2 * params->len;
++ size_t scratch_len = params->scratch_len ?: 3 * params->len;
elems = kzalloc(sizeof(*elems) + scratch_len, GFP_ATOMIC);
if (!elems)
[1] https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git/commit/?id=dfd2d876b3fda1790bc0239ba4c6967e25d16e91
[2] https://lore.kernel.org/all/20221020032340.5cf101c0@canb.auug.org.au/
Major changes:
mac80211
* preparation for Wi-Fi 7 Multi-Link Operation (MLO) continues
* add API to show the link STAs in debugfs
* all mac80211 drivers are now using mac80211 internal TX queues (iTXQs)
rtw89
* support 8852BE
rtl8xxxu
* support RTL8188FU
brmfmac
* support two station interfaces concurrently
bcma
* support SPROM rev 11
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmNb2KwRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZs6hggAqrmgHaiRbPYlLVE0hFVaGeVXslfpK9nj
ZGr3bwG5FpioxjAsI7NfwEwpq+FoxTUigG/SShw1Rr8lw43Nt7E57+5McK3qWdKC
5/WndfChPppjtJUpc6PN+UcmCuhcm4TAyMAojbTe5lJ9cJ4yyOWZChDwah3BVZQk
/tHK4qKq8gpppwgkiJ88VdTVoVv5anIvXHH3lAIteljxk0zkaEM7lIQhIFst/zpX
cu/cWvKz2Rh6vnYjkzl8BcrbW8e0/VwnzWggtWs4/kIuRVnHRrrGwlnsULShOscM
fmK+RI2CbJIMucttUOHOXjCg4wwppSit1rH4xOkcwlvrFa7AvDbdHg==
=Zils
-----END PGP SIGNATURE-----
Kalle Valo says:
====================
pull-request: wireless-next-2022-10-28
First set of patches v6.2. mac80211 refactoring continues for Wi-Fi 7.
All mac80211 driver are now converted to use internal TX queues, this
might cause some regressions so we wanted to do this early in the
cycle.
Note: wireless tree was merged[1] to wireless-next to avoid some
conflicts with mac80211 patches between the trees. Unfortunately there
are still two smaller conflicts in net/mac80211/util.c which Stephen
also reported[2]. In the first conflict initialise scratch_len to
"params->scratch_len ?: 3 * params->len" (note number 3, not 2!) and
in the second conflict take the version which uses elems->scratch_pos.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git/commit/?id=dfd2d876b3fda1790bc0239ba4c6967e25d16e91
[2] https://lore.kernel.org/all/20221020032340.5cf101c0@canb.auug.org.au/
mac80211
- preparation for Wi-Fi 7 Multi-Link Operation (MLO) continues
- add API to show the link STAs in debugfs
- all mac80211 drivers are now using mac80211 internal TX queues (iTXQs)
rtw89
- support 8852BE
rtl8xxxu
- support RTL8188FU
brmfmac
- support two station interfaces concurrently
bcma
- support SPROM rev 11
====================
Link: https://lore.kernel.org/r/20221028132943.304ECC433B5@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ieee80211_register_hw free the allocated cipher suites when
registering wiphy fail, and ieee80211_free_hw will re-free it.
set wiphy_ciphers_allocated to false after freeing allocated
cipher suites.
Signed-off-by: taozhang <taozhang@bestechnic.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEq5lC5tSkz8NBJiCnSfxwEqXeA64FAmNHYD0ACgkQSfxwEqXe
A655AA//dJK0PdRghqrKQsl18GOCffV5TUw5i1VbJQbI9d8anfxNjVUQiNGZi4et
qUwZ8OqVXxYx1Z1UDgUE39PjEDSG9/cCvOpMUWqN20/+6955WlNZjwA7Fk6zjvlM
R30fz5CIJns9RFvGT4SwKqbVLXIMvfg/wDENUN+8sxt36+VD2gGol7J2JJdngEhM
lW+zqzi0ABqYy5so4TU2kixpKmpC08rqFvQbD1GPid+50+JsOiIqftDErt9Eg1Mg
MqYivoFCvbAlxxxRh3+UHBd7ZpJLtp1UFEOl2Rf00OXO+ZclLCAQAsTczucIWK9M
8LCZjb7d4lPJv9RpXFAl3R1xvfc+Uy2ga5KeXvufZtc5G3aMUKPuIU7k28ZyblVS
XXsXEYhjTSd0tgi3d0JlValrIreSuj0z2QGT5pVcC9utuAqAqRIlosiPmgPlzXjr
Us4jXaUhOIPKI+Musv/fqrxsTQziT0jgVA3Njlt4cuAGm/EeUbLUkMWwKXjZLTsv
vDsBhEQFmyZqxWu4pYo534VX2mQWTaKRV1SUVVhQEHm57b00EAiZohoOvweB09SR
4KiJapikoopmW4oAUFotUXUL1PM6yi+MXguTuc1SEYuLz/tCFtK8DJVwNpfnWZpE
lZKvXyJnHq2Sgod/hEZq58PMvT6aNzTzSg7YzZy+VabxQGOO5mc=
=M+mV
-----END PGP SIGNATURE-----
Merge tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull more random number generator updates from Jason Donenfeld:
"This time with some large scale treewide cleanups.
The intent of this pull is to clean up the way callers fetch random
integers. The current rules for doing this right are:
- If you want a secure or an insecure random u64, use get_random_u64()
- If you want a secure or an insecure random u32, use get_random_u32()
The old function prandom_u32() has been deprecated for a while
now and is just a wrapper around get_random_u32(). Same for
get_random_int().
- If you want a secure or an insecure random u16, use get_random_u16()
- If you want a secure or an insecure random u8, use get_random_u8()
- If you want secure or insecure random bytes, use get_random_bytes().
The old function prandom_bytes() has been deprecated for a while
now and has long been a wrapper around get_random_bytes()
- If you want a non-uniform random u32, u16, or u8 bounded by a
certain open interval maximum, use prandom_u32_max()
I say "non-uniform", because it doesn't do any rejection sampling
or divisions. Hence, it stays within the prandom_*() namespace, not
the get_random_*() namespace.
I'm currently investigating a "uniform" function for 6.2. We'll see
what comes of that.
By applying these rules uniformly, we get several benefits:
- By using prandom_u32_max() with an upper-bound that the compiler
can prove at compile-time is ≤65536 or ≤256, internally
get_random_u16() or get_random_u8() is used, which wastes fewer
batched random bytes, and hence has higher throughput.
- By using prandom_u32_max() instead of %, when the upper-bound is
not a constant, division is still avoided, because
prandom_u32_max() uses a faster multiplication-based trick instead.
- By using get_random_u16() or get_random_u8() in cases where the
return value is intended to indeed be a u16 or a u8, we waste fewer
batched random bytes, and hence have higher throughput.
This series was originally done by hand while I was on an airplane
without Internet. Later, Kees and I worked on retroactively figuring
out what could be done with Coccinelle and what had to be done
manually, and then we split things up based on that.
So while this touches a lot of files, the actual amount of code that's
hand fiddled is comfortably small"
* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove unused functions
treewide: use get_random_bytes() when possible
treewide: use get_random_u32() when possible
treewide: use get_random_{u8,u16}() when possible, part 2
treewide: use get_random_{u8,u16}() when possible, part 1
treewide: use prandom_u32_max() when possible, part 2
treewide: use prandom_u32_max() when possible, part 1
The prandom_bytes() function has been a deprecated inline wrapper around
get_random_bytes() for several releases now, and compiles down to the
exact same code. Replace the deprecated wrapper with a direct call to
the real function. This was done as a basic find and replace.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> # powerpc
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
All drivers are now using mac80211 internal queues (iTXQs).
Drop mac80211 internal support for the old push path.
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Start to align the TX handling to only use internal TX queues (iTXQs):
Provide a handler for drivers not having a custom wake_tx_queue
callback and update the documentation.
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If beacon protection is active but the beacon cannot be
decrypted or is otherwise malformed, we call the cfg80211
API to report this to userspace, but that uses a netdev
pointer, which isn't present for P2P-Device. Fix this to
call it only conditionally to ensure cfg80211 won't crash
in the case of P2P-Device.
This fixes CVE-2022-42722.
Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 9eaf183af7 ("mac80211: Report beacon protection failures to user space")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we parse a multi-BSSID element, we might point some
element pointers into the allocated nontransmitted_profile.
However, we free this before returning, causing UAF when the
relevant pointers in the parsed elements are accessed.
Fix this by not allocating the scratch buffer separately but
as part of the returned structure instead, that way, there
are no lifetime issues with it.
The scratch buffer introduction as part of the returned data
here is taken from MLO feature work done by Ilan.
This fixes CVE-2022-42719.
Fixes: 5023b14cf4 ("mac80211: support profile split between elements")
Co-developed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Per spec, the maximum value for the MaxBSSID ('n') indicator is 8,
and the minimum is 1 since a multiple BSSID set with just one BSSID
doesn't make sense (the # of BSSIDs is limited by 2^n).
Limit this in the parsing in both cfg80211 and mac80211, rejecting
any elements with an invalid value.
This fixes potentially bad shifts in the processing of these inside
the cfg80211_gen_new_bssid() function later.
I found this during the investigation of CVE-2022-41674 fixed by the
previous patch.
Fixes: 0b8fb8235b ("cfg80211: Parsing of Multiple BSSID information in scanning")
Fixes: 78ac51f815 ("mac80211: support multi-bssid")
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Remove unused has_mrr (has multi-rate retry capabilities) member
from struct minstrel_priv (only set once in minstrel_ht_alloc, never
used again).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This should of course be CONFIG_, not CPTCFG_, which is an
artifact from working with backports.
Fixes: 9dd1953846 ("wifi: nl80211/mac80211: clarify link ID in control port TX")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
HE added support for dynamic fragmentation inside aggregation
sessions, but no existing driver ever advertises it. Thus,
remove the code for now, it cannot work as-is in MLO. For it
to properly work in MLO, we'd need to validate that the frag
level is identical across all the link bands/iftypes, which
is a good amount of complex code that's just not worth it as
long as no driver has support for it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the deflink of the station is on 6 GHz, then it won't have HT.
If at the same time we're using MLO, then vif.bss_conf isn't used,
and thus vif.bss_conf.chandef.chan is NULL, causing the code to
crash.
Fix this by just checking for both HT and HE, and refusing the
aggregation session if both are not present. This might be a bit
wrong since it would accept an aggregation session from a peer
that has HE but no HT on 2.4 or 5 GHz, but such a peer shouldn't
exist in the first place, and it probably supports aggregation if
it has HE support.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This won't work right at least with the code as it is, so
at least for now just assume it's never set for MLO. It may
very well never change, almost no drivers support it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix the code that sets the DTIM period to always propagate it
into link->conf->dtim_period and not overwrite it, while still
preferring to set it from the beacon data if available.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the station has no HT, we deny the aggregation session
but the error message talks about QoS; change it to say HT
instead.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Ensure that the link ID matches in auth/assoc continuation,
otherwise we need to reset all the data.
Fixes: 81151ce462 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If association to an AP without a link 0 fails, then we crash in
tracing because it assumes that either ap_mld_addr or link 0 BSS
is valid, since we clear sdata->vif.valid_links and then don't
add the ap_mld_addr to the struct.
Since we clear also sdata->vif.cfg.ap_addr, keep a local copy of
it and assign it earlier, before clearing valid_links, to fix
this.
Fixes: 81151ce462 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since this frame is addressed from/to an MLD, it should be
built with the correct AP MLD address (in station mode) to
be encrypted properly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If any driver relies entirely on the scan request BSSID,
then that would be wrong for internal scans. Initialize
it to the broadcast address since we don't otherwise use
the field.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, we rely only on the AP capability. If the AP supports
TWT responder we will advertise TWT requester even if the driver
or HW doesn't support it. Fix this by checking the HW capability.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We should set the parameters here per link, except
unfortunately ap_isolate, but we can't really change
that anymore so it'll remain a quirk in the API in
that you need to change it on one of the valid links
and it'll apply to all.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This management frame is intended for the MLD so we
treat it in mac80211 as MLD addressed as well, and
should therefore use the MLD address of the AP for
the BSSID field in the frame, address translation
applies.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We use this to look up the destination station, so it
needs to be the MLD address of the AP for an MLO; use
ap_addr instead of the BSSID.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In case the AP returned a non success status for one of the links,
do not activate the link.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When processing an association response frame for a Multi-Link
connection, extract the per station profile for each additional
link, and use it for parsing the link elements.
As the Multi-Link element might be fragmented, add support for
reassembling a fragmented element. To simplify memory management
logic, extend 'struct ieee802_11_elems' to hold a scratch buffer,
which is used for the defragmentation. Once an element is
reconstructed in the scratch area, point the corresponding element
pointer to it. Currently only defragmentation of Multi-Link element
and the contained per-STA profile subelement is supported.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During link switching, the active links change, so we need to
recalculate the aggregate data in the stations.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add the link address to the per-link information, but only if we are
using MLO.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Create debugfs data per-link. For drivers, there is a new operation
link_sta_add_debugfs which will always be called.
For non-MLO, the station directory will be used directly rather than
creating a corresponding subdirectory. As such, non-MLO drivers can
simply continue to create the data from sta_debugfs_add.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
[add missing inlines if !CONFIG_MAC80211_DEBUGFS]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
While often not needed, this considerably simplifies going from a link
to the STA. This helps in cases such as debugfs where a single pointer
should allow accessing a specific link and the STA.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Properly handle TX stop for internal queues (iTXQs) within mac80211.
mac80211 must not stop netdev queues when using mac80211 iTXQs.
For these drivers the netdev interface is created with IFF_NO_QUEUE.
While netdev still drops frames for IFF_NO_QUEUE interfaces when we stop
the netdev queues, it also prints a warning when this happens:
Assuming the mac80211 interface is called wlan0 we would get
"Virtual device wlan0 asks to queue packet!" when netdev has to drop a
frame.
This patch is keeping the harmless netdev queue starts for iTXQ drivers.
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since AP_VLAN interfaces are not passed to the driver, check offload_flags
on the bss vif instead.
Reported-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Fixes: 80a915ec44 ("mac80211: add rx decapsulation offload support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Unlock before returning -EOPNOTSUPP.
Fixes: 3c06e91b40 ("wifi: mac80211: Support POWERED_ADDR_CHANGE feature")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
At some point a few kernel debug prints started appearing which
indicated something was sending invalid IEs:
"bad VHT capabilities, disabling VHT"
"Invalid HE elem, Disable HE"
Turns out these were being printed because the local hardware
supported HE/VHT but the peer/AP did not. Bad/invalid indicates,
to me at least, that the IE is in some way malformed, not missing.
For the HE print (ieee80211_verify_peer_he_mcs_support) it will
now silently fail if the HE capability element is missing (still
prints if the element size is wrong).
For the VHT print, it has been removed completely and will silently
set the DISABLE_VHT flag which is consistent with how DISABLE_HT
is set.
Signed-off-by: James Prestwood <prestwoj@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When building the probe request IEs HE support is checked for
the 6GHz band (wiphy->bands[NL80211_BAND_6GHZ]). If supported
the HE capability IE should be included according to the spec.
The problem is the 16-bit capability is obtained from the
band object (sband) that was passed in, not the 6GHz band
object (sband6). If the sband object doesn't support HE it will
result in a warning.
Fixes: 7d29bc50b3 ("mac80211: always include HE 6GHz capability in probe request")
Signed-off-by: James Prestwood <prestwoj@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since STP TCN frames are only 7 bytes, the pskb_may_pull call returns an error.
Instead of dropping those packets, bump them back to the slow path for proper
processing.
Fixes: 49ddf8e6e2 ("mac80211: add fast-rx path")
Reported-by: Chad Monroe <chad.monroe@smartrg.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Few stack changes and lots of driver changes in this round. brcmfmac
has more activity as usual and it gets new hardware support. ath11k
improves WCN6750 support and also other smaller features. And of
course changes all over.
Note: in early September wireless tree was merged to wireless-next to
avoid some conflicts with mac80211 patches, this shouldn't cause any
problems but wanted to mention anyway.
Major changes:
mac80211
* refactoring and preparation for Wi-Fi 7 Multi-Link Operation (MLO)
feature continues
brcmfmac
* support CYW43439 SDIO chipset
* support BCM4378 on Apple platforms
* support CYW89459 PCIe chipset
rtw89
* more work to get rtw8852c supported
* P2P support
* support for enabling and disabling MSDU aggregation via nl80211
mt76
* tx status reporting improvements
ath11k
* cold boot calibration support on WCN6750
* Target Wake Time (TWT) debugfs support for STA interface
* support to connect to a non-transmit MBSSID AP profile
* enable remain-on-channel support on WCN6750
* implement SRAM dump debugfs interface
* enable threaded NAPI on all hardware
* WoW support for WCN6750
* support to provide transmit power from firmware via nl80211
* support to get power save duration for each client
* spectral scan support for 160 MHz
wcn36xx
* add SNR from a received frame as a source of system entropy
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmM3BGYRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuR3Af/XiuMlnDB6flq+M/kQHLWWvHybLw5aCJ7
l3yXhNFWxpBl2hQXtj17JSjVCYQmxbfrgRqhbNhyACO25bpymCb5QctB9X+Y7TwL
250JmuKvQfFx5oJNRfJ67dKTf3raloQYbdEMJNqySgebL+eSfrDskc9vaCLVDmCK
I994fl0Q1wUbJ6fbuIFd07ti8ay6UlSS/iakv4+nEeimabtZWJWlXBWYRpKpikdP
h9z2kPtss6yz6seaQuw6ny+qysYLi11Tp+Cued9XR3dWOOhB2X1tLHH0H02xPw76
9OJZEJHycP2juxjMfAaktHY+VX36GPLsMLUTVusH0h/Fdy3VG8YSAw==
=emmG
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.1
Few stack changes and lots of driver changes in this round. brcmfmac
has more activity as usual and it gets new hardware support. ath11k
improves WCN6750 support and also other smaller features. And of
course changes all over.
Note: in early September wireless tree was merged to wireless-next to
avoid some conflicts with mac80211 patches, this shouldn't cause any
problems but wanted to mention anyway.
Major changes:
mac80211
- refactoring and preparation for Wi-Fi 7 Multi-Link Operation (MLO)
feature continues
brcmfmac
- support CYW43439 SDIO chipset
- support BCM4378 on Apple platforms
- support CYW89459 PCIe chipset
rtw89
- more work to get rtw8852c supported
- P2P support
- support for enabling and disabling MSDU aggregation via nl80211
mt76
- tx status reporting improvements
ath11k
- cold boot calibration support on WCN6750
- Target Wake Time (TWT) debugfs support for STA interface
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- implement SRAM dump debugfs interface
- enable threaded NAPI on all hardware
- WoW support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
wcn36xx
- add SNR from a received frame as a source of system entropy
* tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (231 commits)
wifi: rtl8xxxu: Improve rtl8xxxu_queue_select
wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAM
wifi: rtl8xxxu: gen2: Enable 40 MHz channel width
wifi: rtw89: 8852b: configure DLE mem
wifi: rtw89: check DLE FIFO size with reserved size
wifi: rtw89: mac: correct register of report IMR
wifi: rtw89: pci: set power cut closed for 8852be
wifi: rtw89: pci: add to do PCI auto calibration
wifi: rtw89: 8852b: implement chip_ops::{enable,disable}_bb_rf
wifi: rtw89: add DMA busy checking bits to chip info
wifi: rtw89: mac: define DMA channel mask to avoid unsupported channels
wifi: rtw89: pci: mask out unsupported TX channels
iwlegacy: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper
ipw2x00: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
wifi: iwlwifi: Track scan_cmd allocation size explicitly
brcmfmac: Remove the call to "dtim_assoc" IOVAR
brcmfmac: increase dcmd maximum buffer size
brcmfmac: Support 89459 pcie
brcmfmac: increase default max WOWL patterns to 16
cw1200: fix incorrect check to determine if no element is found in list
...
====================
Link: https://lore.kernel.org/r/20220930150413.A7984C433D6@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pskb_may_pull already contains all of the checks performed by
pskb_pull.
Use pskb_may_pull for validation in pskb_pull, eliminating the
duplication and making __pskb_pull obsolete.
Replace __pskb_pull with pskb_pull where applicable.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 6911458dc4 ("wifi: mac80211: mlme: refactor assoc success
handling") moved the per-link setup out of ieee80211_assoc_success() into a
new function ieee80211_assoc_config_link() but missed to remove the unlock
of 'sta_mtx' in case of HE capability/operation missing on HE AP, which
leads to a double unlock:
ieee80211_assoc_success() {
...
ieee80211_assoc_config_link() {
...
if (!(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE) &&
(!elems->he_cap || !elems->he_operation)) {
mutex_unlock(&sdata->local->sta_mtx);
...
}
...
}
...
mutex_unlock(&sdata->local->sta_mtx);
...
}
Fixes: 6911458dc4 ("wifi: mac80211: mlme: refactor assoc success handling")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Link: https://lore.kernel.org/r/20220925143420.784975-1-rafaelmendsr@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit 98b0b46746 ("wifi: mac80211: mlme: use correct link_sta")
switched to link station instead of deflink and added some checks to do
that, which are done with the 'sta_mtx' mutex held. However, the error
path of these checks does not unlock 'sta_mtx' before returning.
Fixes: 98b0b46746 ("wifi: mac80211: mlme: use correct link_sta")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Link: https://lore.kernel.org/r/20220924184042.778676-1-rafaelmendsr@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During our testing of WFM200 module over SDIO on i.MX6Q-based platform,
we discovered a memory corruption on the system, tracing back to the wfx
driver. Using kfence, it was possible to trace it back to the root
cause, which is hw->max_rates set to 8 in wfx_init_common,
while the maximum defined by IEEE80211_TX_TABLE_SIZE is 4.
This causes array out-of-bounds writes during updates of the rate table,
as seen below:
BUG: KFENCE: memory corruption in kfree_rcu_work+0x320/0x36c
Corrupted memory at 0xe0a4ffe0 [ 0x03 0x03 0x03 0x03 0x01 0x00 0x00
0x02 0x02 0x02 0x09 0x00 0x21 0xbb 0xbb 0xbb ] (in kfence-#81):
kfree_rcu_work+0x320/0x36c
process_one_work+0x3ec/0x920
worker_thread+0x60/0x7a4
kthread+0x174/0x1b4
ret_from_fork+0x14/0x2c
0x0
kfence-#81: 0xe0a4ffc0-0xe0a4ffdf, size=32, cache=kmalloc-64
allocated by task 297 on cpu 0 at 631.039555s:
minstrel_ht_update_rates+0x38/0x2b0 [mac80211]
rate_control_tx_status+0xb4/0x148 [mac80211]
ieee80211_tx_status_ext+0x364/0x1030 [mac80211]
ieee80211_tx_status+0xe0/0x118 [mac80211]
ieee80211_tasklet_handler+0xb0/0xe0 [mac80211]
tasklet_action_common.constprop.0+0x11c/0x148
__do_softirq+0x1a4/0x61c
irq_exit+0xcc/0x104
call_with_stack+0x18/0x20
__irq_svc+0x80/0xb0
wq_worker_sleeping+0x10/0x100
wq_worker_sleeping+0x10/0x100
schedule+0x50/0xe0
schedule_timeout+0x2e0/0x474
wait_for_completion+0xdc/0x1ec
mmc_wait_for_req_done+0xc4/0xf8
mmc_io_rw_extended+0x3b4/0x4ec
sdio_io_rw_ext_helper+0x290/0x384
sdio_memcpy_toio+0x30/0x38
wfx_sdio_copy_to_io+0x88/0x108 [wfx]
wfx_data_write+0x88/0x1f0 [wfx]
bh_work+0x1c8/0xcc0 [wfx]
process_one_work+0x3ec/0x920
worker_thread+0x60/0x7a4
kthread+0x174/0x1b4
ret_from_fork+0x14/0x2c 0x0
After discussion on the wireless mailing list it was clarified
that the issue has been introduced by:
commit ee0e16ab75 ("mac80211: minstrel_ht: fill all requested rates")
and fix shall be in minstrel_ht_update_rates in rc80211_minstrel_ht.c.
Fixes: ee0e16ab75 ("mac80211: minstrel_ht: fill all requested rates")
Link: https://lore.kernel.org/all/12e5adcd-8aed-f0f7-70cc-4fb7b656b829@camlingroup.com/
Link: https://lore.kernel.org/linux-wireless/20220915131445.30600-1-lech.perczak@camlingroup.com/
Cc: Jérôme Pouiller <jerome.pouiller@silabs.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Krzysztof Drobiński <krzysztof.drobinski@camlingroup.com>,
Signed-off-by: Paweł Lenkow <pawel.lenkow@camlingroup.com>
Signed-off-by: Lech Perczak <lech.perczak@camlingroup.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit 10cb8e6175 ("mac80211: enable QoS support for nl80211 ctrl port")
changed ieee80211_tx_control_port() to aways call
__ieee80211_select_queue() without checking local->hw.queues.
__ieee80211_select_queue() returns a queue-id between 0 and 3, which means
that now ieee80211_tx_control_port() may end up setting the queue-mapping
for a skb to a value higher then local->hw.queues if local->hw.queues
is less then 4.
Specifically this is a problem for ralink rt2500-pci cards where
local->hw.queues is 2. There this causes rt2x00queue_get_tx_queue() to
return NULL and the following error to be logged: "ieee80211 phy0:
rt2x00mac_tx: Error - Attempt to send packet over invalid queue 2",
after which association with the AP fails.
Other callers of __ieee80211_select_queue() skip calling it when
local->hw.queues < IEEE80211_NUM_ACS, add the same check to
ieee80211_tx_control_port(). This fixes ralink rt2500-pci and
similar cards when less then 4 tx-queues no longer working.
Fixes: 10cb8e6175 ("mac80211: enable QoS support for nl80211 ctrl port")
Cc: Markus Theil <markus.theil@tu-ilmenau.de>
Suggested-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220918192052.443529-1-hdegoede@redhat.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Make sure local->queue_stop_reasons and vif.txqs_stopped stay in sync.
When a new vif is created the queues may end up in an inconsistent state
and be inoperable:
Communication not using iTXQ will work, allowing to e.g. complete the
association. But the 4-way handshake will time out. The sta will not
send out any skbs queued in iTXQs.
All normal attempts to start the queues will fail when reaching this
state.
local->queue_stop_reasons will have marked all queues as operational but
vif.txqs_stopped will still be set, creating an inconsistent internal
state.
In reality this seems to be race between the mac80211 function
ieee80211_do_open() setting SDATA_STATE_RUNNING and the wake_txqs_tasklet:
Depending on the driver and the timing the queues may end up to be
operational or not.
Cc: stable@vger.kernel.org
Fixes: f856373e2f ("wifi: mac80211: do not wake queues on a vif that is being stopped")
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Acked-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220915130946.302803-1-alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_txq_purge() calls fq_tin_reset() and
ieee80211_purge_tx_queue(); Both are then calling
ieee80211_free_txskb(). Which can decide to TX the skb again.
There are at least two ways to get a deadlock:
1) When we have a TDLS teardown packet queued in either tin or frags
ieee80211_tdls_td_tx_handle() will call ieee80211_subif_start_xmit()
while we still hold fq->lock. ieee80211_txq_enqueue() will thus
deadlock.
2) A variant of the above happens if aggregation is up and running:
In that case ieee80211_iface_work() will deadlock with the original
task: The original tasks already holds fq->lock and tries to get
sta->lock after kicking off ieee80211_iface_work(). But the worker
can get sta->lock prior to the original task and will then spin for
fq->lock.
Avoid these deadlocks by not sending out any skbs when called via
ieee80211_free_txskb().
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Link: https://lore.kernel.org/r/20220915124120.301918-1-alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
drivers/net/ethernet/freescale/fec.h
7d650df99d ("net: fec: add pm_qos support on imx6q platform")
40c79ce13b ("net: fec: add stop mode support for imx8 platform")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement an API function and debugfs file to switch
active links.
Also provide an async version of the API so drivers
can call it in arbitrary contexts, e.g. while in the
authorized callback.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The A-MSDU data needs to be stored per-link and aggregated into a single
value for the station. Add a new struct ieee_80211_sta_aggregates in
order to store this data and a new function
ieee80211_sta_recalc_aggregates to update the current data for the STA.
Note that in the non MLO case the pointer in ieee80211_sta will directly
reference the data in deflink.agg, which means that recalculation may be
skipped in that case.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add macros (and an exported function) to allow checking some
link RCU protected accesses that are happening in callbacks
from mac80211 and are thus under the correct lock.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a link_id parameter to ieee80211_nullfunc_get() to be
able to obtain a correctly addressed frame.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a new API function ieee80211_find_sta_by_link_addrs()
that looks up the STA and link ID based on interface and
station link addresses.
We're going to use it for mac80211-hwsim to track on the
AP side which links are active.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to let the driver select active links and properly
make multi-link connections, as a first step isolate the
driver from inactive links, and set the active links to be
only the association link for client-side interfaces. For
AP side nothing changes since APs always have to have all
their links active.
To simplify things, update the for_each_sta_active_link()
API to include the appropriate vif pointer.
This also implies not allocating a chanctx for an inactive
link, which requires a few more changes.
Since we now no longer try to program multiple links to the
driver, remove the check in the MLME code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The SMPS power save mode needs to be per-link rather than being shared
for all links. As such, move it into struct ieee80211_link_sta.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use rx->link_sta everywhere instead of accessing the default link.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Now that we have a link_sta pointer in the rx struct
we also need to fill it in all the cases. It didn't
matter so much until now as we weren't using it, but
the code should really be able to assume that if the
rx.sta is set, so is rx.link_sta.
Fixes: ccdde7c74f ("wifi: mac80211: properly implement MLO key handling")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- rtw89: large update across the map, e.g. coex, pci(e), etc.
- ath9k: uninit memory read fix
- ath10k: small peer map fix and a WCN3990 device fix
- wfx: underflow
stack
- the "change MAC address while IFF_UP" change from James
we discussed
- more MLO work, including a set of fixes for the previous
code, now that we have more code we can exercise it more
- prevent some features with MLO that aren't ready yet
(AP_VLAN and 4-address connections)
-----BEGIN PGP SIGNATURE-----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=7imA
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
drivers
- rtw89: large update across the map, e.g. coex, pci(e), etc.
- ath9k: uninit memory read fix
- ath10k: small peer map fix and a WCN3990 device fix
- wfx: underflow
stack
- the "change MAC address while IFF_UP" change from James
we discussed
- more MLO work, including a set of fixes for the previous
code, now that we have more code we can exercise it more
- prevent some features with MLO that aren't ready yet
(AP_VLAN and 4-address connections)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- fix DMA from stack in wilc1000 driver
- fix crash on chip reset failure in mt7921e
- fix for the reported warning on aggregation timer expiry
- check packet lengths in hwsim virtio paths
- fix compiler warnings/errors with AAD construction by
using struct_group
- fix Intel 4965 driver rate scale operation
- release channel contexts correctly in mac80211 mlme code
-----BEGIN PGP SIGNATURE-----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=GyC3
-----END PGP SIGNATURE-----
Merge tag 'wireless-2022-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes berg says:
====================
We have a handful of fixes:
- fix DMA from stack in wilc1000 driver
- fix crash on chip reset failure in mt7921e
- fix for the reported warning on aggregation timer expiry
- check packet lengths in hwsim virtio paths
- fix compiler warnings/errors with AAD construction by
using struct_group
- fix Intel 4965 driver rate scale operation
- release channel contexts correctly in mac80211 mlme code
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, other paths calling drv_sta_state() hold the mutex
and therefore drivers can assume that, and look at links with
that protection. Fix that for the reconfig path as well; to
do it more easily use ieee80211_reconfig_stations() for the
AP/AP_VLAN station reconfig as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we stop a not-yet-started scan, we erroneously call
into the driver, causing a sequence of sw_scan_start()
followed by sw_scan_complete() twice. This will cause a
warning in hwsim with next in line commit that validates
the address passed to wmediumd/virtio. Fix this by doing
the calls only if we were actually scanning.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Right now, we assign the link address only after we add
the link to the driver, which is quite obviously wrong.
It happens to work in many cases because it gets updated
immediately, and then link_conf updates may update it,
but it's clearly not really right.
Set the link address during ieee80211_mgd_setup_link()
so it's set before telling the driver about the link.
Fixes: 81151ce462 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We probably should've done that originally, we already have
about 300 lines of code there, and will add more. Move all
the link code we wrote to a new file.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We don't need the sdata argument, and it doesn't make any
sense for a direct conversion from one value to another,
so just remove the argument
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Adds support in mac80211 for NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE.
The motivation behind this functionality is to fix limitations of
address randomization on frequencies which are disallowed in world
roaming.
The way things work now, if a client wants to randomize their address
per-connection it must power down the device, change the MAC, and
power back up. Here lies a problem since powering down the device
may result in frequencies being disabled (until the regdom is set).
If the desired BSS is on one such frequency the client is unable to
connect once the phy is powered again.
For mac80211 based devices changing the MAC while powered is possible
but currently disallowed (-EBUSY). This patch adds some logic to
allow a MAC change while powered by removing the interface, changing
the MAC, and adding it again. mac80211 will advertise support for
this feature so userspace can determine the best course of action e.g.
disallow address randomization on certain frequencies if not
supported.
There are certain limitations put on this which simplify the logic:
- No active connection
- No offchannel work, including scanning.
Signed-off-by: James Prestwood <prestwoj@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We sometimes copy all the addresses from the 802.11 header
for the AAD, which may cause complaints from fortify checks.
Use struct_group() to avoid the compiler warnings/errors.
Change-Id: Ic3ea389105e7813b22095b295079eecdabde5045
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we hit an authentication or association timeout, we only
release the chanctx for the deflink, and the other link(s)
are released later by ieee80211_vif_set_links(), but we're
not locking this correctly.
Fix the locking here while releasing the channels and links.
Change-Id: I9e08c1a5434592bdc75253c1abfa6c788f9f39b1
Fixes: 81151ce462 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the prep_channel error case we didn't release the deflink
channel leaving it to be left around. Fix that.
Change-Id: If0dfd748125ec46a31fc6045a480dc28e03723d2
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The rx data link pointer isn't set from the RX aggregation timer,
resulting in a later warning. Fix that by setting it to the first
valid link for now, with a FIXME to worry about statistics later,
it's not very important since it's just the timeout case.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/498d714c-76be-9d04-26db-a1206878de5e@redhat.com
Fixes: 56057da456 ("wifi: mac80211: rx: track link in RX data")
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
On 32bit-UP u64_stats_fetch_begin() disables only preemption. If the
reader is in preemptible context and the writer side
(u64_stats_update_begin*()) runs in an interrupt context (IRQ or
softirq) then the writer can update the stats during the read operation.
This update remains undetected.
Use u64_stats_fetch_begin_irq() to ensure the stats fetch on 32bit-UP
are not interrupted by a writer. 32bit-SMP remains unaffected by this
change.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Catherine Sullivan <csully@google.com>
Cc: David Awogbemila <awogbemila@google.com>
Cc: Dimitris Michailidis <dmichail@fungible.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jeroen de Borst <jeroendb@google.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <simon.horman@corigine.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: oss-drivers@corigine.com
Cc: stable@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* rtw88: operation, locking, warning, and code style fixes
* rtw89: small updates
* cfg80211/mac80211: more EHT/MLO (802.11be, WiFi 7) work
* brcmfmac: a couple of fixes
* misc cleanups etc.
-----BEGIN PGP SIGNATURE-----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=J5Fc
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-08-26-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes berg says:
====================
Various updates:
* rtw88: operation, locking, warning, and code style fixes
* rtw89: small updates
* cfg80211/mac80211: more EHT/MLO (802.11be, WiFi 7) work
* brcmfmac: a couple of fixes
* misc cleanups etc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we add 6 GHz capability in MLO, we cannot use the SMPS
mode from the deflink. Pass it separately instead since on
a second link we don't even have a link data struct yet.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
From 'IEEE Std 802.11-2020 section 11.8.8.4.1':
The mesh channel switch may be triggered by the need to avoid
interference to a detected radar signal, or to reassign mesh STA
channels to ensure the MBSS connectivity.
A 20/40 MHz MBSS may be changed to a 20 MHz MBSS and a 20 MHz
MBSS may be changed to a 20/40 MHz MBSS.
Since the standard allows the change of bandwidth during
the channel switch in mesh, remove the bandwidth check present in
ieee80211_set_csa_beacon.
Fixes: c6da674aff ("{nl,cfg,mac}80211: enable the triggering of CSA frame in mesh")
Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com>
Link: https://lore.kernel.org/r/1658903549-21218-1-git-send-email-quic_haric@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit 177577dbd2 ("wifi: mac80211: sta_info: fix link_sta insertion")
makes ieee80211_sta_activate_link() return 0 in the 'hash' label case.
Hence, setting ret in the !test_sta_flag(...) branch to zero is not needed
anymore and can be dropped.
Remove a needless assignment.
No functional change. No change in object code.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20220812103126.25308-1-lukas.bulwahn@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In ieee80211_tx_dequeue() we currently allow a control port
frame to be transmitted on a non-authorized port only if the
A2 matches the local interface address, but if that's an MLD
and the peer is a legacy peer, we need to allow link address
here. Fix that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For an AP interface, when userspace specifieds the link ID to
transmit the control port frame on (in particular for the
initial 4-way-HS), due to the logic in ieee80211_build_hdr()
for a frame transmitted from/to an MLD, we currently build a
header with
A1 = DA = MLD address of the peer MLD
A2 = local link address (!)
A3 = SA = local MLD address
This clearly makes no sense, and leads to two problems:
- if the frame were encrypted (not true for the initial
4-way-HS) the AAD would be calculated incorrectly
- if iTXQs are used, the frame is dropped by logic in
ieee80211_tx_dequeue()
Fix the addressing, which fixes the first bullet, and the
second bullet for peer MLDs, I'll fix the second one for
non-MLD peers separately.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is simple here, and might save drivers some work if
they have common code for TX between beacons and other
frames.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To helper drivers if they e.g. have a lookup of the link_sta
pointer, add the link ID to the link_sta structure.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For AP/non-AP the EHT MCS/NSS subfield size differs, the
4-octet subfield is only used for 20 MHz-only non-AP STA.
Pass an argument around everywhere to be able to parse it
properly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Draft P802.11be_D2.1, section 35.3.17 states that the EML Capabilities
Field shouldn't be included in case the device doesn't have support for
EMLSR or EMLMR.
Fixes: 81151ce462 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When queuing frames to an interface store the link ID we
determined (which possibly came from the driver in the
RX status in the first place) in the RX status, and use
it in the MLME code to send probe responses, beacons and
CSA frames to the right link.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With link_id reported in rx_status for MLO connection, do the
stats update on the appropriate link instead of always deflink.
Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com>
Link: https://lore.kernel.org/r/20220817104213.2531-3-quic_vthiagar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In MLO, when the address translation from link to MLD is done
in fw/hw, it is necessary to be able to have some information
on the link on which the frame has been received. Extend the
rx API to include link_id and a valid flag in ieee80211_rx_status.
Also make chanes to mac80211 rx APIs to make use of the reported
link_id after sanity checks.
Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com>
Link: https://lore.kernel.org/r/20220817104213.2531-2-quic_vthiagar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement key installation and lookup (on TX and RX)
for MLO, so we can use multiple GTKs/IGTKs/BIGTKs.
Co-authored-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for various key operations on MLD by adding new parameter
link_id. Pass the link_id received from userspace to driver for add_key,
get_key, del_key, set_default_key, set_default_mgmt_key and
set_default_beacon_key to support configuring keys specific to each MLO
link. Userspace must not specify link ID for MLO pairwise key since it
is common for all the MLO links.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/20220730052643.1959111-4-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We've already freed the assoc_data at this point, so need
to use another copy of the AP (MLD) address instead.
Fixes: 81151ce462 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Configure the correct link per the passed parameters.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For an AP interface, set the link BSSID when the link
is initialized.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In ieee80211_sta_remove_link, valid_links is set to
the new_links before calling drv_change_sta_links, but
is used for the old_links.
Fixes: cb71f1d136 ("wifi: mac80211: add sta link addition/removal")
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If there's no link ID, then check that there are no changes to
the link, and if so accept them, unless a new link is created.
While at it, reject creating a new link without an address.
This fixes authorizing an MLD (peer) that has no link 0.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The ieee80211_lookup_ra_sta() function will sometimes set "sta" to NULL
so add this NULL check to prevent an Oops.
Fixes: 9dd1953846 ("wifi: nl80211/mac80211: clarify link ID in control port TX")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YuKcTAyO94YOy0Bu@kili
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add missing dev_kfree_skb() in an error path in
ieee80211_tx_control_port() to avoid a memory leak.
Fixes: dd820ed633 ("wifi: mac80211: return error from control port TX for drops")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220818043349.4168835-1-yangyingliang@huawei.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_scan_rx() tries to access scan_req->flags after a
null check, but a UAF is observed when the scan is completed
and __ieee80211_scan_completed() executes, which then calls
cfg80211_scan_done() leading to the freeing of scan_req.
Since scan_req is rcu_dereference()'d, prevent the racing in
__ieee80211_scan_completed() by ensuring that from mac80211's
POV it is no longer accessed from an RCU read critical section
before we call cfg80211_scan_done().
Cc: stable@vger.kernel.org
Link: https://syzkaller.appspot.com/bug?extid=f9acff9bf08a845f225d
Reported-by: syzbot+f9acff9bf08a845f225d@syzkaller.appspotmail.com
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Link: https://lore.kernel.org/r/20220819200340.34826-1-code@siddh.me
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- Runtime verification infrastructure
This is the biggest change for this pull request. It introduces the
runtime verification that is necessary for running Linux on safety
critical systems. It allows for deterministic automata models to be
inserted into the kernel that will attach to tracepoints, where the
information on these tracepoints will move the model from state to state.
If a state is encountered that does not belong to the model, it will then
activate a given reactor, that could just inform the user or even panic
the kernel (for which safety critical systems will detect and can recover
from).
- Two monitor models are also added: Wakeup In Preemptive (WIP - not to be
confused with "work in progress"), and Wakeup While Not Running (WWNR).
- Added __vstring() helper to the TRACE_EVENT() macro to replace several
vsnprintf() usages that were all doing it wrong.
- eprobes now can have their event autogenerated when the event name is left
off.
- The rest is various cleanups and fixes.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYu0yzRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qj4HAP4tQtV55rjj4DQ5XIXmtI3/64PmyRSJ
+y4DEXi1UvEUCQD/QAuQfWoT/7gh35ltkfeS4t3ockzy14rrkP5drZigiQA=
=kEtM
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Runtime verification infrastructure
This is the biggest change here. It introduces the runtime
verification that is necessary for running Linux on safety critical
systems.
It allows for deterministic automata models to be inserted into the
kernel that will attach to tracepoints, where the information on
these tracepoints will move the model from state to state.
If a state is encountered that does not belong to the model, it will
then activate a given reactor, that could just inform the user or
even panic the kernel (for which safety critical systems will detect
and can recover from).
- Two monitor models are also added: Wakeup In Preemptive (WIP - not to
be confused with "work in progress"), and Wakeup While Not Running
(WWNR).
- Added __vstring() helper to the TRACE_EVENT() macro to replace
several vsnprintf() usages that were all doing it wrong.
- eprobes now can have their event autogenerated when the event name is
left off.
- The rest is various cleanups and fixes.
* tag 'trace-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (50 commits)
rv: Unlock on error path in rv_unregister_reactor()
tracing: Use alignof__(struct {type b;}) instead of offsetof()
tracing/eprobe: Show syntax error logs in error_log file
scripts/tracing: Fix typo 'the the' in comment
tracepoints: It is CONFIG_TRACEPOINTS not CONFIG_TRACEPOINT
tracing: Use free_trace_buffer() in allocate_trace_buffers()
tracing: Use a struct alignof to determine trace event field alignment
rv/reactor: Add the panic reactor
rv/reactor: Add the printk reactor
rv/monitor: Add the wwnr monitor
rv/monitor: Add the wip monitor
rv/monitor: Add the wip monitor skeleton created by dot2k
Documentation/rv: Add deterministic automata instrumentation documentation
Documentation/rv: Add deterministic automata monitor synthesis documentation
tools/rv: Add dot2k
Documentation/rv: Add deterministic automaton documentation
tools/rv: Add dot2c
Documentation/rv: Add a basic documentation
rv/include: Add instrumentation helper functions
rv/include: Add deterministic automata monitor definition via C macros
...
Instead of open coding a __dynamic_array() with a fixed length (which
defeats the purpose of the dynamic array in the first place). Use the new
__vstring() helper that will use a va_list and only write enough of the
string into the ring buffer that is needed.
Link: https://lkml.kernel.org/r/20220705224751.271015450@goodmis.org
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
During the code reshuffling, I accidentally set this to
NULL before using it, fix that to fix the link data leak.
Fixes: d3e2439b0f ("wifi: mac80211: fix link manipulation")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In MLO we shouldn't call ieee80211_bss_info_change_notify(),
call that only (for backward compatibility) without MLO, and
otherwise ieee80211_vif_cfg_change_notify().
Similarly, ieee80211_reset_erp_info() only applies to the
current link, and in MLO we assume the driver doesn't really
need that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In sta_apply_parameters(), we really no longer need to
check that the link or sband exists, in fact, that's
harmful if link 0 doesn't exist, since then this will
fail.
Just remove this check, it was added for validation of
the sband where used, but it's not used here, it's now
only used in sta_link_apply_parameters() which has an
own lookup and check.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To transmit the association frame to the right station and
with address translation, use the correct addresses there
and set up the AP address in the configuration earlier so
it's applied during the transmit of auth/assoc frames.
Fixes: 81151ce462 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We'll need the link e.g. for decrypt, and shouldn't be
looking it up all the time later, so track it in the RX
data.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For drivers using software encryption for multicast TX, such
as mac80211_hwsim, mac80211 needs to duplicate the multicast
frames on each link, if MLO is enabled. Do this, but don't
just make it dependent on the key but provide a separate flag
for drivers to opt out of this.
This is not very efficient, I expect that drivers will do it
in firmware/hardware or at least with DMA engine assistence,
so this is mostly for hwsim.
To make this work, also implement the SNS11 sequence number
space that an AP MLD shall have, and modify the API to the
__ieee80211_subif_start_xmit() function to always require the
link ID bits to be set.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are a couple of new things that should be possible
with MLO:
* selecting the link to transmit to a station by link ID,
which a previous patch added to the nl80211 API
* selecting the link by frequency, similarly
* allowing transmittion to an MLD without specifying any
channel or link ID, with MLD addresses
Enable these use cases. Also fix the address comparison
in client mode to use the AP (MLD) address.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the low level driver reports hardware timestamps for frame
TX status or frame RX, pass the timestamps to cfg80211.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When inserting a link STA, make sure it doesn't exist first
and add lockdep assertions that we cannot modify the hash
table without holding the sta_mtx, so this check is really
correct.
Also return without hashing if the driver failed, and warn
if the hashing fails, which shouldn't happen due to the
check described above.
Fixes: cb71f1d136 ("wifi: mac80211: add sta link addition/removal")
Fixes: ba6ddab94f ("wifi: mac80211: maintain link-sta hash table")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We need to copy the address to both the private and public
portion of the link_sta (the private one is needed for the
hash table). Fix this.
Fixes: bbe90107e1 ("wifi: mac80211: mlme: refactor link station setup")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Clarify the link ID behaviour in control port TX, we need it
to select the link to transmit on for both MLD and non-MLD
receivers, but select the link address as the SA only if the
receiver is not an MLD.
Fixes: 67207bab93 ("wifi: cfg80211/mac80211: Support control port TX from specific link")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the frame is going to be dropped anyway because
ieee80211_lookup_ra_sta() returned an error (and
even though it's a bit racy, it will likely continue
to do so), return the error out instead of just
silently dropping the frame.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add more sanity checks to the API handling, we shouldn't
be able to create a station without links, nor should we
be able to add a link to a station that wasn't created as
an MLD with links in the first place.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are two issues here: we unhash the link stations only
directly before freeing the station they belong to, and we
also don't unhash all the links correctly in all cases. Fix
these issues.
Fixes: ba6ddab94f ("wifi: mac80211: maintain link-sta hash table")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When modifying a link station, validate that the link address
doesn't change, except the first time the link is created.
Fixes: b95eb7f0ee ("wifi: cfg80211/mac80211: separate link params from station params")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
At this point, we've already changed link_id to be zero for
a non-MLO connection, so use the 'mlo' variable rather than
link ID to determine the MLO status of the station.
Fixes: bd363ee533 ("wifi: mac80211: mlme: set sta.mlo correctly")
Fixes: 81151ce462 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If there's a non-MLO client, the A2 must be set to the BSSID
of the link since no translation will happen in lower layers
and it's needed that way for encryption.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We should only translate addr3 here if it's the BSSID.
Fixes: 42fb9148c0 ("wifi: mac80211: do link->MLD address translation on RX")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we have a non-MLD STA on an AP MLD, we crash while
adding the station. Fix that, in this case we need to
use the STA's address also on the link data structure.
Fixes: f36fe0a2df ("wifi: mac80211: fix up link station creation/insertion")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In my previous changes here, I neglected to take the old
conn_flags into account that might still be present from
the authentication, and thus ieee80211_setup_assoc_link()
can misbehave, as well as the override calculation being
wrong. Fix that by ORing in the old flags.
Fixes: 1845c1d4a4 ("wifi: mac80211: mlme: refactor assoc link setup")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In a few places we need to use the AP (MLD) address, not the
deflink BSSID, the link address translation will happen later.
To make that work properly for fast-xmit, set up the ap_addr
in the vif.cfg earlier.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
lockdep complains use of uninitialized spinlock at ieee80211_do_stop() [1],
for commit f856373e2f ("wifi: mac80211: do not wake queues on a vif
that is being stopped") guards clear_bit() using fq.lock even before
fq_init() from ieee80211_txq_setup_flows() initializes this spinlock.
According to discussion [2], Toke was not happy with expanding usage of
fq.lock. Since __ieee80211_wake_txqs() is called under RCU read lock, we
can instead use synchronize_rcu() for flushing ieee80211_wake_txqs().
Link: https://syzkaller.appspot.com/bug?extid=eceab52db7c4b961e9d6 [1]
Link: https://lkml.kernel.org/r/874k0zowh2.fsf@toke.dk [2]
Reported-by: syzbot <syzbot+eceab52db7c4b961e9d6@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: f856373e2f ("wifi: mac80211: do not wake queues on a vif that is being stopped")
Tested-by: syzbot <syzbot+eceab52db7c4b961e9d6@syzkaller.appspotmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/9cc9b81d-75a3-3925-b612-9d0ad3cab82b@I-love.SAKURA.ne.jp
Due to some changes and rebasing between different patches
this fell through the cracks; we need to set sta.mlo if the
connection is using MLO.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It might seem a bit pointless to do a multi-link operation
connection with just a single link, but this is already a
big change, so for now, limit MLO connections to a single
link.
Extending that to multiple links will require
* work on parsing the multi-link element with STA profile
properly, including element fragmentation;
* checking the per-link status in the multi-link element
* implementing logic to have active/inactive links to let
drivers decide which links should be active;
* implementing multicast RX deduplication;
* and likely more.
For now this is still useful since it lets us do multi-link
connections for the purposes of testing APIs and the higher
layers such as wpa_supplicant.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add the necessary API to parse the multi-link element in
the future. For now, link only to the element when found
so we can use it in the client-side code later.
Later, we'll need to fill this in to deal with element
fragmentation, parse the STA profile, etc.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In some cases, e.g. with Qualcomm devices and management
frames, or in hwsim, frames may be reported from the driver
with link addresses, but for decryption and matching needs
we really want to have them with MLD addresses. Support the
translation on RX.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When an MLO AP is transmitting to a non-MLO station, addr2 should be set
to a link address. This should be done before the frame is encrypted as
otherwise aad verification would fail. In case of software encryption
this can't be left for the device to handle, and should be done by
mac80211 when building the frame hdr.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we create a station with a non-default link, then
we should have a link address, and we definitely need
to insert it into the link hash table on insertion.
Split the API into with and without link creation and
if it has a link, insert the link into the link hash
table on sta_info_insert().
Fixes: ba6ddab94f ("wifi: mac80211: maintain link-sta hash table")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In AP/mesh where the stations are added by userspace, we
limit the number of A-MSDU subframes according to the
extended capabilities.
Refactor the code and extend that also to client-side.
Fixes: 506bcfa8ab ("mac80211: limit the A-MSDU Tx based on peer's capabilities")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Split out much of the code in ieee80211_set_associated()
into a new ieee80211_link_set_associated() which can be
called per link later for MLO.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Jakub Kicinski