On the architectures with perf memory profiling, two types of hardware
events have been supported: load and store; if want to profile memory
for both load and store operations, the tool will use these two events
at the same time, the usage is:
# perf mem record -t load,store -- uname
But this cannot be applied for AUX tracing event, the same PMU event can
be used to only trace memory load, or only memory store, or trace for
both memory load and store.
This patch introduces a new event PERF_MEM_EVENTS__LOAD_STORE, which is
used to support the event which can record both memory load and store
operations.
When user specifies memory operation type as 'load,store', or doesn't
set type so use 'load,store' as default, if the arch supports the event
PERF_MEM_EVENTS__LOAD_STORE, the tool will convert the required
operations to this single event; otherwise, if the arch doesn't support
PERF_MEM_EVENTS__LOAD_STORE, the tool rolls back to enable both events
PERF_MEM_EVENTS__LOAD and PERF_MEM_EVENTS__STORE, which keeps the same
behaviour with before.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201106094853.21082-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Different architectures might use different event or different event
parameters for memory profiling, this patch introduces a weak
perf_mem_events__ptr() function which allows to return back a
architecture specific memory event.
Since the variable 'perf_mem_events' can be only accessed by the
perf_mem_events__ptr() function, mark the variable as 'static', this
allows the architectures to define its own memory event array.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201106094853.21082-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf tool searches a memory event name under the folder
'/sys/devices/cpu/events/', this leads to the limitation for the
selection of a memory profiling event which must be under this folder.
Thus it's impossible to use any other event as memory event which is not
under this specific folder, e.g. Arm SPE hardware event is not located
in '/sys/devices/cpu/events/' so it cannot be enabled for memory
profiling.
This patch changes to search folder from '/sys/devices/cpu/events/' to
'/sys/devices', so it give flexibility to find events which can be used
for memory profiling.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201106094853.21082-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new --quiet option to 'perf stat'. This is useful with 'perf stat
record' to write the data only to the perf.data file, which can lower
measurement overhead because the data doesn't need to be formatted.
On my 4C desktop:
% time ./perf stat record -e $(python -c 'print ",".join(["cycles"]*1000)') -a -I 1000 sleep 5
...
real 0m5.377s
user 0m0.238s
sys 0m0.452s
% time ./perf stat record --quiet -e $(python -c 'print ",".join(["cycles"]*1000)') -a -I 1000 sleep 5
real 0m5.452s
user 0m0.183s
sys 0m0.423s
In this example it cuts the user time by 20%. On systems with more cores
the savings are higher.
Signed-off-by: Andi Kleen <andi@firstfloor.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Link: http://lore.kernel.org/lkml/20201027002737.30942-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If libbpf isn't selected, no need for a bunch of related code, that were
not even being used, as code using these perf_env methods was also
enclosed in HAVE_LIBBPF_SUPPORT.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No need to include it otherwise.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it uses the 'deprecated' attribute in a way that breaks the build
with old gcc compilers, so to continue being able to build in such
systems where NO_LIBBPF=1 is being used, enclose it under
HAVE_LIBBPF_SUPPORT.
1 centos:6 : FAIL gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23)
2 oraclelinux:6 : FAIL gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23.0.1)
CC /tmp/build/perf/builtin-record.o
In file included from util/bpf-loader.h:11,
from builtin-record.c:39:
/git/linux/tools/lib/bpf/libbpf.h:203: error: wrong number of arguments specified for 'deprecated' attribute
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some archs (e.g. x86 and Arm64) don't enable the configuration
CONFIG_MEMORY_HOTPLUG by default, if this configuration is not enabled
when build the kernel image, the SysFS for memory nodes will be missed.
This results in perf tool has no chance to catpure the memory nodes
information, when perf tool reports the result and detects no memory
nodes, it outputs "assertion failed at util/mem2node.c:99".
The output log doesn't give out reason for the failure and users have no
clue for how to fix it. This patch changes to use explicit way for
warning: it tells user that detected no memory nodes and suggests to
enable CONFIG_MEMORY_HOTPLUG for kernel building.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201019003613.8399-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was missed to add a swap function for PERF_RECORD_CGROUP.
Fixes: ba78c1c546 ("perf tools: Basic support for CGROUP event")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201102140228.303657-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We are missing swap for ino_generation field.
Fixes: 5c5e854bc7 ("perf tools: Add attr->mmap2 support")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20201101233103.3537427-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We display garbage for undefined build_id objects, because we don't
initialize the output buffer.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20201101233103.3537427-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To avoid this:
util/scripting-engines/trace-event-python.c: In function 'python_start_script':
util/scripting-engines/trace-event-python.c:1595:2: error: 'visibility' attribute ignored [-Werror=attributes]
1595 | PyMODINIT_FUNC (*initfunc)(void);
| ^~~~~~~~~~~~~~
That started breaking when building with PYTHON=python3 and these gcc
versions (I haven't checked with the clang ones, maybe it breaks there
as well):
# export PERF_TARBALL=http://192.168.86.5/perf/perf-5.9.0.tar.xz
# dm fedora:33 fedora:rawhide
1 107.80 fedora:33 : Ok gcc (GCC) 10.2.1 20201005 (Red Hat 10.2.1-5), clang version 11.0.0 (Fedora 11.0.0-1.fc33)
2 92.47 fedora:rawhide : Ok gcc (GCC) 10.2.1 20201016 (Red Hat 10.2.1-6), clang version 11.0.0 (Fedora 11.0.0-1.fc34)
#
Avoid that by ditching that 'initfunc' function pointer with its:
#define Py_EXPORTED_SYMBOL _attribute_ ((visibility ("default")))
#define PyMODINIT_FUNC Py_EXPORTED_SYMBOL PyObject*
And just call PyImport_AppendInittab() at the end of the ifdef python3
block with the functions that were being attributed to that initfunc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The addr in PERF_RECORD_KSYMBOL events for non-jited bpf progs points to
the bpf interpreter, ie. within kernel text section. When processing the
unregister event, this causes unexpected removal of vmlinux_map,
crashing perf later in cleanup:
# perf record -- timeout --signal=INT 2s /usr/share/bcc/tools/execsnoop
PCOMM PID PPID RET ARGS
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.208 MB perf.data (5155 samples) ]
perf: tools/include/linux/refcount.h:131: refcount_sub_and_test: Assertion `!(new > val)' failed.
Aborted (core dumped)
# perf script -D|grep KSYM
0 0xa40 [0x48]: PERF_RECORD_KSYMBOL addr ffffffffa9b6b530 len 0 type 1 flags 0x0 name bpf_prog_f958f6eb72ef5af6
0 0xab0 [0x48]: PERF_RECORD_KSYMBOL addr ffffffffa9b6b530 len 0 type 1 flags 0x0 name bpf_prog_8c42dee26e8cd4c2
0 0xb20 [0x48]: PERF_RECORD_KSYMBOL addr ffffffffa9b6b530 len 0 type 1 flags 0x0 name bpf_prog_f958f6eb72ef5af6
108563691893 0x33d98 [0x58]: PERF_RECORD_KSYMBOL addr ffffffffa9b6b3b0 len 0 type 1 flags 0x0 name bpf_prog_bc5697a410556fc2_syscall__execve
108568518458 0x34098 [0x58]: PERF_RECORD_KSYMBOL addr ffffffffa9b6b3f0 len 0 type 1 flags 0x0 name bpf_prog_45e2203c2928704d_do_ret_sys_execve
109301967895 0x34830 [0x58]: PERF_RECORD_KSYMBOL addr ffffffffa9b6b3b0 len 0 type 1 flags 0x1 name bpf_prog_bc5697a410556fc2_syscall__execve
109302007356 0x348b0 [0x58]: PERF_RECORD_KSYMBOL addr ffffffffa9b6b3f0 len 0 type 1 flags 0x1 name bpf_prog_45e2203c2928704d_do_ret_sys_execve
perf: tools/include/linux/refcount.h:131: refcount_sub_and_test: Assertion `!(new > val)' failed.
Here the addresses match the bpf interpreter:
# grep -e ffffffffa9b6b530 -e ffffffffa9b6b3b0 -e ffffffffa9b6b3f0 /proc/kallsyms
ffffffffa9b6b3b0 t __bpf_prog_run224
ffffffffa9b6b3f0 t __bpf_prog_run192
ffffffffa9b6b530 t __bpf_prog_run32
Fix by not allowing vmlinux_map to be removed by PERF_RECORD_KSYMBOL
unregister event.
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201016114718.54332-1-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in:
85367030a6 ("libbpf: Centralize poisoning and poison reallocarray()")
7d9c71e10b ("libbpf: Extract generic string hashing function for reuse")
That don't entail any changes in tools/perf.
This addresses this perf build warning:
Warning: Kernel ABI header at 'tools/perf/util/hashmap.h' differs from latest version at 'tools/lib/bpf/hashmap.h'
diff -u tools/perf/util/hashmap.h tools/lib/bpf/hashmap.h
Not a kernel ABI, its just that this uses the mechanism in place for
checking kernel ABI files drift.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- cgroup improvements for 'perf stat', allowing for compact specification of events
and cgroups in the command line.
- Support per thread topdown metrics in 'perf stat'.
- Support sample-read topdown metric group in 'perf record'
- Show start of latency in addition to its start in 'perf sched latency'.
- Add min, max to 'perf script' futex-contention output, in addition to avg.
- Allow usage of 'perf_event_attr->exclusive' attribute via the new ':e' event
modifier.
- Add 'snapshot' command to 'perf record --control', using it with Intel PT.
- Support FIFO file names as alternative options to 'perf record --control'.
- Introduce branch history "streams", to compare 'perf record' runs with
'perf diff' based on branch records and report hot streams.
- Support PE executable symbol tables using libbfd, to profile, for instance, wine binaries.
- Add filter support for option 'perf ftrace -F/--funcs'.
- Allow configuring the 'disassembler_style' 'perf annotate' knob via 'perf config'
- Update CascadelakeX and SkylakeX JSON vendor events files.
- Add support for parsing perchip/percore JSON vendor events.
- Add power9 hv_24x7 core level metric events.
- Add L2 prefetch, ITLB instruction fetch hits JSON events for AMD zen1.
- Enable Family 19h users by matching Zen2 AMD vendor events.
- Use debuginfod in 'perf probe' when required debug files not found locally.
- Display negative tid in non-sample events in 'perf script'.
- Make GTK2 support opt-in
- Add build test with GTK+
- Add missing -lzstd to the fast path feature detection
- Add scripts to auto generate 'mmap', 'mremap' string<->id tables for use in 'perf trace'.
- Show python test script in verbose mode.
- Fix uncore metric expressions
- Msan uninitialized use fixes.
- Use condition variables in 'perf bench numa'
- Autodetect python3 binary in systems without python2.
- Support md5 build ids in addition to sha1.
- Add build id 'perf test' regression test.
- Fix printable strings in python3 scripts.
- Fix off by ones in 'perf trace' in arches using libaudit.
- Fix JSON event code for events referencing std arch events.
- Introduce 'perf test' shell script for Arm CoreSight testing.
- Add rdtsc() for Arm64 for used in the PERF_RECORD_TIME_CONV metadata
event and in 'perf test tsc'.
- 'perf c2c' improvements: Add "RMT Load Hit" metric, "Total Stores", fixes
and documentation update.
- Fix usage of reloc_sym in 'perf probe' when using both kallsyms and debuginfo files.
- Do not print 'Metric Groups:' unnecessarily in 'perf list'
- Refcounting fixes in the event parsing code.
- Add expand cgroup event 'perf test' entry.
- Fix out of bounds CPU map access when handling armv8_pmu events in 'perf stat'.
- Add build-id injection 'perf bench' benchmark.
- Enter namespace when reading build-id in 'perf inject'.
- Do not load map/dso when injecting build-id speeding up the 'perf inject' process.
- Add --buildid-all option to avoid processing all samples, just the mmap metadata events.
- Add feature test to check if libbfd has buildid support
- Add 'perf test' entry for PE binary format support.
- Fix typos in power8 PMU vendor events JSON files.
- Hide libtraceevent non API functions.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test results:
The first ones are container based builds of tools/perf with and without libelf
support. Where clang is available, it is also used to build perf with/without
libelf, and building with LIBCLANGLLVM=1 (built-in clang) with gcc and clang
when clang and its devel libraries are installed.
The objtool and samples/bpf/ builds are disabled now that I'm switching from
using the sources in a local volume to fetching them from a http server to
build it inside the container, to make it easier to build in a container cluster.
Those will come back later.
Several are cross builds, the ones with -x-ARCH and the android one, and those
may not have all the features built, due to lack of multi-arch devel packages,
available and being used so far on just a few, like
debian:experimental-x-{arm64,mipsel}.
The 'perf test' one will perform a variety of tests exercising
tools/perf/util/, tools/lib/{bpf,traceevent,etc}, as well as run perf commands
with a variety of command line event specifications to then intercept the
sys_perf_event syscall to check that the perf_event_attr fields are set up as
expected, among a variety of other unit tests.
Then there is the 'make -C tools/perf build-test' ones, that build tools/perf/
with a variety of feature sets, exercising the build with an incomplete set of
features as well as with a complete one. It is planned to have it run on each
of the containers mentioned above, using some container orchestration
infrastructure. Get in contact if interested in helping having this in place.
$ grep "model name" -m1 /proc/cpuinfo
model name: AMD Ryzen 9 3900X 12-Core Processor
$ export PERF_TARBALL=http://192.168.122.1/perf/perf-5.9.0-rc7.tar.xz
$ dm
Thu 15 Oct 2020 01:10:56 PM -03
1 67.40 alpine:3.4 : Ok gcc (Alpine 5.3.0) 5.3.0, clang version 3.8.0 (tags/RELEASE_380/final)
2 69.01 alpine:3.5 : Ok gcc (Alpine 6.2.1) 6.2.1 20160822, clang version 3.8.1 (tags/RELEASE_381/final)
3 70.79 alpine:3.6 : Ok gcc (Alpine 6.3.0) 6.3.0, clang version 4.0.0 (tags/RELEASE_400/final)
4 79.89 alpine:3.7 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.0 (tags/RELEASE_500/final) (based on LLVM 5.0.0)
5 80.88 alpine:3.8 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.1 (tags/RELEASE_501/final) (based on LLVM 5.0.1)
6 83.88 alpine:3.9 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 5.0.1 (tags/RELEASE_502/final) (based on LLVM 5.0.1)
7 107.87 alpine:3.10 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 8.0.0 (tags/RELEASE_800/final) (based on LLVM 8.0.0)
8 115.43 alpine:3.11 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 9.0.0 (https://git.alpinelinux.org/aports f7f0d2c2b8bcd6a5843401a9a702029556492689) (based on LLVM 9.0.0)
9 106.80 alpine:3.12 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (https://gitlab.alpinelinux.org/alpine/aports.git 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
10 114.06 alpine:edge : Ok gcc (Alpine 10.2.0) 10.2.0, Alpine clang version 10.0.1
11 70.42 alt:p8 : Ok x86_64-alt-linux-gcc (GCC) 5.3.1 20151207 (ALT p8 5.3.1-alt3.M80P.1), clang version 3.8.0 (tags/RELEASE_380/final)
12 98.70 alt:p9 : Ok x86_64-alt-linux-gcc (GCC) 8.4.1 20200305 (ALT p9 8.4.1-alt0.p9.1), clang version 10.0.0
13 80.37 alt:sisyphus : Ok x86_64-alt-linux-gcc (GCC) 9.3.1 20200518 (ALT Sisyphus 9.3.1-alt1), clang version 10.0.1
14 64.12 amazonlinux:1 : Ok gcc (GCC) 7.2.1 20170915 (Red Hat 7.2.1-2), clang version 3.6.2 (tags/RELEASE_362/final)
15 97.64 amazonlinux:2 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-9), clang version 7.0.1 (Amazon Linux 2 7.0.1-1.amzn2.0.2)
16 22.70 android-ndk:r12b-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
17 22.72 android-ndk:r15c-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
18 26.70 centos:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23)
19 31.86 centos:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39)
20 113.19 centos:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5), clang version 9.0.1 (Red Hat 9.0.1-2.module_el8.2.0+309+0c7b6b03)
21 57.23 clearlinux:latest : Ok gcc (Clear Linux OS for Intel Architecture) 10.2.1 20200908 releases/gcc-10.2.0-203-g127d693955, clang version 10.0.1
22 64.98 debian:8 : Ok gcc (Debian 4.9.2-10+deb8u2) 4.9.2, Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0)
23 76.08 debian:9 : Ok gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516, clang version 3.8.1-24 (tags/RELEASE_381/final)
24 74.49 debian:10 : Ok gcc (Debian 8.3.0-6) 8.3.0, clang version 7.0.1-8+deb10u2 (tags/RELEASE_701/final)
25 78.50 debian:experimental : Ok gcc (Debian 10.2.0-15) 10.2.0, Debian clang version 11.0.0-2
26 33.30 debian:experimental-x-arm64 : Ok aarch64-linux-gnu-gcc (Debian 10.2.0-3) 10.2.0
27 30.96 debian:experimental-x-mips64 : Ok mips64-linux-gnuabi64-gcc (Debian 9.3.0-8) 9.3.0
28 32.63 debian:experimental-x-mipsel : Ok mipsel-linux-gnu-gcc (Debian 9.3.0-8) 9.3.0
29 30.12 fedora:20 : Ok gcc (GCC) 4.8.3 20140911 (Red Hat 4.8.3-7)
30 30.99 fedora:22 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.5.0 (tags/RELEASE_350/final)
31 68.60 fedora:23 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.7.0 (tags/RELEASE_370/final)
32 78.92 fedora:24 : Ok gcc (GCC) 6.3.1 20161221 (Red Hat 6.3.1-1), clang version 3.8.1 (tags/RELEASE_381/final)
33 26.15 fedora:24-x-ARC-uClibc : Ok arc-linux-gcc (ARCompact ISA Linux uClibc toolchain 2017.09-rc2) 7.1.1 20170710
34 80.13 fedora:25 : Ok gcc (GCC) 6.4.1 20170727 (Red Hat 6.4.1-1), clang version 3.9.1 (tags/RELEASE_391/final)
35 90.68 fedora:26 : Ok gcc (GCC) 7.3.1 20180130 (Red Hat 7.3.1-2), clang version 4.0.1 (tags/RELEASE_401/final)
36 90.45 fedora:27 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 5.0.2 (tags/RELEASE_502/final)
37 100.88 fedora:28 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 6.0.1 (tags/RELEASE_601/final)
38 105.99 fedora:29 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 7.0.1 (Fedora 7.0.1-6.fc29)
39 111.05 fedora:30 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 8.0.0 (Fedora 8.0.0-3.fc30)
40 29.96 fedora:30-x-ARC-glibc : Ok arc-linux-gcc (ARC HS GNU/Linux glibc toolchain 2019.03-rc1) 8.3.1 20190225
41 27.02 fedora:30-x-ARC-uClibc : Ok arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225
42 110.47 fedora:31 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 9.0.1 (Fedora 9.0.1-2.fc31)
43 88.78 fedora:32 : Ok gcc (GCC) 10.2.1 20200723 (Red Hat 10.2.1-1), clang version 10.0.0 (Fedora 10.0.0-2.fc32)
44 15.92 fedora:rawhide : FAIL gcc (GCC) 10.2.1 20200916 (Red Hat 10.2.1-4), clang version 11.0.0 (Fedora 11.0.0-0.4.rc3.fc34)
45 33.58 gentoo-stage3-amd64:latest : Ok gcc (Gentoo 9.3.0-r1 p3) 9.3.0
46 65.32 mageia:5 : Ok gcc (GCC) 4.9.2, clang version 3.5.2 (tags/RELEASE_352/final)
47 81.35 mageia:6 : Ok gcc (Mageia 5.5.0-1.mga6) 5.5.0, clang version 3.9.1 (tags/RELEASE_391/final)
48 103.94 mageia:7 : Ok gcc (Mageia 8.4.0-1.mga7) 8.4.0, clang version 8.0.0 (Mageia 8.0.0-1.mga7)
49 91.62 manjaro:latest : Ok gcc (GCC) 10.2.0, clang version 10.0.1
50 219.87 openmandriva:cooker : Ok gcc (GCC) 10.2.0 20200723 (OpenMandriva), OpenMandriva 11.0.0-0.20200909.1 clang version 11.0.0 (/builddir/build/BUILD/llvm-project-release-11.x/clang 5cb8ffbab42358a7cdb0a67acfadb84df0779579)
51 111.76 opensuse:15.0 : Ok gcc (SUSE Linux) 7.4.1 20190905 [gcc-7-branch revision 275407], clang version 5.0.1 (tags/RELEASE_501/final 312548)
52 118.03 opensuse:15.1 : Ok gcc (SUSE Linux) 7.5.0, clang version 7.0.1 (tags/RELEASE_701/final 349238)
53 107.91 opensuse:15.2 : Ok gcc (SUSE Linux) 7.5.0, clang version 9.0.1
54 102.34 opensuse:tumbleweed : Ok gcc (SUSE Linux) 10.2.1 20200825 [revision c0746a1beb1ba073c7981eb09f55b3d993b32e5c], clang version 10.0.1
55 25.33 oraclelinux:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23.0.1)
56 30.45 oraclelinux:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44.0.3)
57 104.65 oraclelinux:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5.0.3), clang version 9.0.1 (Red Hat 9.0.1-2.0.1.module+el8.2.0+5599+9ed9ef6d)
58 26.04 ubuntu:12.04 : Ok gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3, Ubuntu clang version 3.0-6ubuntu3 (tags/RELEASE_30/final) (based on LLVM 3.0)
59 29.49 ubuntu:14.04 : Ok gcc (Ubuntu 4.8.4-2ubuntu1~14.04.4) 4.8.4
60 72.95 ubuntu:16.04 : Ok gcc (Ubuntu 5.4.0-6ubuntu1~16.04.12) 5.4.0 20160609, clang version 3.8.0-2ubuntu4 (tags/RELEASE_380/final)
61 26.03 ubuntu:16.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
62 25.15 ubuntu:16.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
63 24.88 ubuntu:16.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
64 25.72 ubuntu:16.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
65 25.39 ubuntu:16.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
66 25.34 ubuntu:16.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
67 84.84 ubuntu:18.04 : Ok gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0, clang version 6.0.0-1ubuntu2 (tags/RELEASE_600/final)
68 27.15 ubuntu:18.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
69 26.68 ubuntu:18.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
70 22.38 ubuntu:18.04-x-m68k : Ok m68k-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
71 26.35 ubuntu:18.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
72 28.58 ubuntu:18.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
73 28.18 ubuntu:18.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
74 178.55 ubuntu:18.04-x-riscv64 : Ok riscv64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
75 24.58 ubuntu:18.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
76 26.89 ubuntu:18.04-x-sh4 : Ok sh4-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
77 24.81 ubuntu:18.04-x-sparc64 : Ok sparc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
78 68.90 ubuntu:19.10 : Ok gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008, clang version 8.0.1-3build1 (tags/RELEASE_801/final)
79 69.31 ubuntu:20.04 : Ok gcc (Ubuntu 9.3.0-10ubuntu2) 9.3.0, clang version 10.0.0-4ubuntu1
80 30.00 ubuntu:20.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 10-20200411-0ubuntu1) 10.0.1 20200411 (experimental) [master revision bb87d5cc77d:75961caccb7:f883c46b4877f637e0fa5025b4d6b5c9040ec566]
81 70.34 ubuntu:20.10 : Ok gcc (Ubuntu 10.2.0-5ubuntu2) 10.2.0, Ubuntu clang version 10.0.1-1
$
# uname -a
Linux five 5.9.0+ #1 SMP Thu Oct 15 09:06:41 -03 2020 x86_64 x86_64 x86_64 GNU/Linux
# git log --oneline -1
744aec4df2 perf c2c: Update documentation for metrics reorganization
# perf version --build-options
perf version 5.9.rc7.g744aec4df2c5
dwarf: [ on ] # HAVE_DWARF_SUPPORT
dwarf_getlocations: [ on ] # HAVE_DWARF_GETLOCATIONS_SUPPORT
glibc: [ on ] # HAVE_GLIBC_SUPPORT
syscall_table: [ on ] # HAVE_SYSCALL_TABLE_SUPPORT
libbfd: [ on ] # HAVE_LIBBFD_SUPPORT
libelf: [ on ] # HAVE_LIBELF_SUPPORT
libnuma: [ on ] # HAVE_LIBNUMA_SUPPORT
numa_num_possible_cpus: [ on ] # HAVE_LIBNUMA_SUPPORT
libperl: [ on ] # HAVE_LIBPERL_SUPPORT
libpython: [ on ] # HAVE_LIBPYTHON_SUPPORT
libslang: [ on ] # HAVE_SLANG_SUPPORT
libcrypto: [ on ] # HAVE_LIBCRYPTO_SUPPORT
libunwind: [ on ] # HAVE_LIBUNWIND_SUPPORT
libdw-dwarf-unwind: [ on ] # HAVE_DWARF_SUPPORT
zlib: [ on ] # HAVE_ZLIB_SUPPORT
lzma: [ on ] # HAVE_LZMA_SUPPORT
get_cpuid: [ on ] # HAVE_AUXTRACE_SUPPORT
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
aio: [ on ] # HAVE_AIO_SUPPORT
zstd: [ on ] # HAVE_ZSTD_SUPPORT
# perf test
1: vmlinux symtab matches kallsyms : Ok
2: Detect openat syscall event : Ok
3: Detect openat syscall event on all cpus : Ok
4: Read samples using the mmap interface : Ok
5: Test data source output : Ok
6: Parse event definition strings : Ok
7: Simple expression parser : Ok
8: PERF_RECORD_* events & perf_sample fields : Ok
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
11: DSO data read : Ok
12: DSO data cache : Ok
13: DSO data reopen : Ok
14: Roundtrip evsel->name : Ok
15: Parse sched tracepoints fields : Ok
16: syscalls:sys_enter_openat event fields : Ok
17: Setup struct perf_event_attr : Ok
18: Match and link multiple hists : Ok
19: 'import perf' in python : Ok
20: Breakpoint overflow signal handler : Ok
21: Breakpoint overflow sampling : Ok
22: Breakpoint accounting : Ok
23: Watchpoint :
23.1: Read Only Watchpoint : Skip
23.2: Write Only Watchpoint : Ok
23.3: Read / Write Watchpoint : Ok
23.4: Modify Watchpoint : Ok
24: Number of exit events of a simple workload : Ok
25: Software clock events period values : Ok
26: Object code reading : Ok
27: Sample parsing : Ok
28: Use a dummy software event to keep tracking : Ok
29: Parse with no sample_id_all bit set : Ok
30: Filter hist entries : Ok
31: Lookup mmap thread : Ok
32: Share thread maps : Ok
33: Sort output of hist entries : Ok
34: Cumulate child hist entries : Ok
35: Track with sched_switch : Ok
36: Filter fds with revents mask in a fdarray : Ok
37: Add fd to a fdarray, making it autogrow : Ok
38: kmod_path__parse : Ok
39: Thread map : Ok
40: LLVM search and compile :
40.1: Basic BPF llvm compile : Ok
40.2: kbuild searching : Ok
40.3: Compile source for BPF prologue generation : Ok
40.4: Compile source for BPF relocation : Ok
41: Session topology : Ok
42: BPF filter :
42.1: Basic BPF filtering : Ok
42.2: BPF pinning : Ok
42.3: BPF prologue generation : Ok
42.4: BPF relocation checker : Ok
43: Synthesize thread map : Ok
44: Remove thread map : Ok
45: Synthesize cpu map : Ok
46: Synthesize stat config : Ok
47: Synthesize stat : Ok
48: Synthesize stat round : Ok
49: Synthesize attr update : Ok
50: Event times : Ok
51: Read backward ring buffer : Ok
52: Print cpu map : Ok
53: Merge cpu map : Ok
54: Probe SDT events : Ok
55: is_printable_array : Ok
56: Print bitmap : Ok
57: perf hooks : Ok
58: builtin clang support : Skip (not compiled in)
59: unit_number__scnprintf : Ok
60: mem2node : Ok
61: time utils : Ok
62: Test jit_write_elf : Ok
63: Test libpfm4 support : Skip (not compiled in)
64: Test api io : Ok
65: maps__merge_in : Ok
66: Demangle Java : Ok
67: Parse and process metrics : Ok
68: PE file support : Ok
69: Event expansion for cgroups : Ok
70: x86 rdpmc : Ok
71: Convert perf time to TSC : Ok
72: DWARF unwind : Ok
73: x86 instruction decoder - new instructions : Ok
74: Intel PT packet decoder : Ok
75: x86 bp modify : Ok
76: probe libc's inet_pton & backtrace it with ping : Ok
77: Check Arm CoreSight trace data recording and synthesized samples: Skip
78: Use vfs_getname probe to get syscall args filenames : Ok
79: Check open filename arg using perf trace + vfs_getname : Ok
80: Zstd perf.data compression/decompression : Ok
81: Add vfs_getname probe to get syscall args filenames : Ok
82: build id cache operations : Ok
#
$ git log --oneline -1
744aec4df2 (HEAD -> perf/core, quaco/perf/core) perf c2c: Update documentation for metrics reorganization
$ make -C tools/perf build-test
make: Entering directory '/home/acme/git/perf/tools/perf'
- tarpkg: ./tests/perf-targz-src-pkg .
make_install_bin_O: make install-bin
make_static_O: make LDFLAGS=-static NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 NO_JVMTI=1
make_no_libdw_dwarf_unwind_O: make NO_LIBDW_DWARF_UNWIND=1
make_no_newt_O: make NO_NEWT=1
make_no_libbionic_O: make NO_LIBBIONIC=1
make_no_sdt_O: make NO_SDT=1
make_debug_O: make DEBUG=1
make_perf_o_O: make perf.o
make_no_libbpf_O: make NO_LIBBPF=1
make_no_libbpf_DEBUG_O: make NO_LIBBPF=1 DEBUG=1
make_clean_all_O: make clean all
make_tags_O: make tags
make_with_babeltrace_O: make LIBBABELTRACE=1
make_with_clangllvm_O: make LIBCLANGLLVM=1
make_no_scripts_O: make NO_LIBPYTHON=1 NO_LIBPERL=1
make_no_libelf_O: make NO_LIBELF=1
make_no_libcrypto_O: make NO_LIBCRYPTO=1
make_with_libpfm4_O: make LIBPFM4=1
make_no_libunwind_O: make NO_LIBUNWIND=1
make_util_map_o_O: make util/map.o
make_no_slang_O: make NO_SLANG=1
make_with_gtk2_O: make GTK2=1
make_no_ui_O: make NO_NEWT=1 NO_SLANG=1 NO_GTK2=1
make_util_pmu_bison_o_O: make util/pmu-bison.o
make_no_backtrace_O: make NO_BACKTRACE=1
make_no_demangle_O: make NO_DEMANGLE=1
make_help_O: make help
make_pure_O: make
make_no_gtk2_O: make NO_GTK2=1
make_install_prefix_O: make install prefix=/tmp/krava
make_no_libnuma_O: make NO_LIBNUMA=1
make_no_libpython_O: make NO_LIBPYTHON=1
make_install_prefix_slash_O: make install prefix=/tmp/krava/
make_no_libaudit_O: make NO_LIBAUDIT=1
make_no_auxtrace_O: make NO_AUXTRACE=1
make_minimal_O: make NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1 NO_DEMANGLE=1 NO_LIBELF=1 NO_LIBUNWIND=1 NO_BACKTRACE=1 NO_LIBNUMA=1 NO_LIBAUDIT=1 NO_LIBBIONIC=1 NO_LIBDW_DWARF_UNWIND=1 NO_AUXTRACE=1 NO_LIBBPF=1 NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1 NO_LIBZSTD=1 NO_LIBCAP=1 NO_SYSCALL_TABLE=1
make_install_O: make install
make_doc_O: make doc
make_no_libperl_O: make NO_LIBPERL=1
make_no_syscall_tbl_O: make NO_SYSCALL_TABLE=1
OK
make: Leaving directory '/home/acme/git/perf/tools/perf'
$
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCX4iuzgAKCRCyPKLppCJ+
J1khAP4iMQMFCMpNsBaL6KLtj3aTOhrooYuhbNL3kajqYVyW/QD8Dws35k6m2+tB
tcOMJykFjPkQ4I13zsxKyugeJuUzSQw=
=KdSj
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v5.10-2020-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools updates from Arnaldo Carvalho de Melo:
- cgroup improvements for 'perf stat', allowing for compact
specification of events and cgroups in the command line.
- Support per thread topdown metrics in 'perf stat'.
- Support sample-read topdown metric group in 'perf record'
- Show start of latency in addition to its start in 'perf sched
latency'.
- Add min, max to 'perf script' futex-contention output, in addition to
avg.
- Allow usage of 'perf_event_attr->exclusive' attribute via the new
':e' event modifier.
- Add 'snapshot' command to 'perf record --control', using it with
Intel PT.
- Support FIFO file names as alternative options to 'perf record
--control'.
- Introduce branch history "streams", to compare 'perf record' runs
with 'perf diff' based on branch records and report hot streams.
- Support PE executable symbol tables using libbfd, to profile, for
instance, wine binaries.
- Add filter support for option 'perf ftrace -F/--funcs'.
- Allow configuring the 'disassembler_style' 'perf annotate' knob via
'perf config'
- Update CascadelakeX and SkylakeX JSON vendor events files.
- Add support for parsing perchip/percore JSON vendor events.
- Add power9 hv_24x7 core level metric events.
- Add L2 prefetch, ITLB instruction fetch hits JSON events for AMD
zen1.
- Enable Family 19h users by matching Zen2 AMD vendor events.
- Use debuginfod in 'perf probe' when required debug files not found
locally.
- Display negative tid in non-sample events in 'perf script'.
- Make GTK2 support opt-in
- Add build test with GTK+
- Add missing -lzstd to the fast path feature detection
- Add scripts to auto generate 'mmap', 'mremap' string<->id tables for
use in 'perf trace'.
- Show python test script in verbose mode.
- Fix uncore metric expressions
- Msan uninitialized use fixes.
- Use condition variables in 'perf bench numa'
- Autodetect python3 binary in systems without python2.
- Support md5 build ids in addition to sha1.
- Add build id 'perf test' regression test.
- Fix printable strings in python3 scripts.
- Fix off by ones in 'perf trace' in arches using libaudit.
- Fix JSON event code for events referencing std arch events.
- Introduce 'perf test' shell script for Arm CoreSight testing.
- Add rdtsc() for Arm64 for used in the PERF_RECORD_TIME_CONV metadata
event and in 'perf test tsc'.
- 'perf c2c' improvements: Add "RMT Load Hit" metric, "Total Stores",
fixes and documentation update.
- Fix usage of reloc_sym in 'perf probe' when using both kallsyms and
debuginfo files.
- Do not print 'Metric Groups:' unnecessarily in 'perf list'
- Refcounting fixes in the event parsing code.
- Add expand cgroup event 'perf test' entry.
- Fix out of bounds CPU map access when handling armv8_pmu events in
'perf stat'.
- Add build-id injection 'perf bench' benchmark.
- Enter namespace when reading build-id in 'perf inject'.
- Do not load map/dso when injecting build-id speeding up the 'perf
inject' process.
- Add --buildid-all option to avoid processing all samples, just the
mmap metadata events.
- Add feature test to check if libbfd has buildid support
- Add 'perf test' entry for PE binary format support.
- Fix typos in power8 PMU vendor events JSON files.
- Hide libtraceevent non API functions.
* tag 'perf-tools-for-v5.10-2020-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (113 commits)
perf c2c: Update documentation for metrics reorganization
perf c2c: Add metrics "RMT Load Hit"
perf c2c: Correct LLC load hit metrics
perf c2c: Change header for LLC local hit
perf c2c: Use more explicit headers for HITM
perf c2c: Change header from "LLC Load Hitm" to "Load Hitm"
perf c2c: Organize metrics based on memory hierarchy
perf c2c: Display "Total Stores" as a standalone metrics
perf c2c: Display the total numbers continuously
perf bench: Use condition variables in numa.
perf jevents: Fix event code for events referencing std arch events
perf diff: Support hot streams comparison
perf streams: Report hot streams
perf streams: Calculate the sum of total streams hits
perf streams: Link stream pair
perf streams: Compare two streams
perf streams: Get the evsel_streams by evsel_idx
perf streams: Introduce branch history "streams"
perf intel-pt: Improve PT documentation slightly
perf tools: Add support for exclusive groups/events
...
We show the streams separately. They are divided into different sections.
1. "Matched hot streams"
2. "Hot streams in old perf data only"
3. "Hot streams in new perf data only".
For each stream, we report the cycles and hot percent (hits%).
For example,
cycles: 2, hits: 4.08%
--------------------------
main div.c:42
compute_flag div.c:28
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20201009022845.13141-7-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have used callchain_node->hit to measure the hot level of one stream.
This patch calculates the sum of hits of total streams.
Thus in next patch, we can use following formula to report hot percent
for one stream.
hot percent = callchain_node->hit / sum of total hits
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20201009022845.13141-6-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In previous patch, we have created an evsel_streams for one event, and
top N hottest streams will be saved in a stream array in evsel_streams.
This patch compares total streams among two evsel_streams.
Once two streams are fully matched, they will be linked as a pair. From
the pair, we can know which streams are matched.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20201009022845.13141-5-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stream is the branch history which is aggregated by the branch records
from perf samples. Now we support the callchain as stream.
If the callchain entries of one stream are fully matched with the
callchain entries of another stream, we think two streams are matched.
For example,
cycles: 1, hits: 26.80% cycles: 1, hits: 27.30%
----------------------- -----------------------
main div.c:39 main div.c:39
main div.c:44 main div.c:44
Above two streams are matched (we don't consider the case that source
code is changed).
The matching logic is, compare the chain string first. If it's not
matched, fallback to dso address comparison.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20201009022845.13141-4-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In previous patch, we have created evsel_streams array.
This patch returns the specified evsel_streams according to the
evsel_idx.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20201009022845.13141-3-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We define a stream as the branch history which is aggregated by the
branch records from perf samples. For example, the callchains aggregated
from the branch records are considered as streams. By browsing the hot
stream, we can understand the hot code path.
Now we only support the callchain for stream. For measuring the hot
level for a stream, we use the callchain_node->hit, higher is hotter.
There may be many callchains sampled so we only focus on the top N
hottest callchains. N is a user defined parameter or predefined default
value (nr_streams_max).
This patch creates an evsel_streams array per event, and saves the top N
hottest streams in a stream array.
So now we can get the per-event top N hottest streams.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20201009022845.13141-2-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Peter suggested that using the exclusive mode in perf could avoid some
problems with bad scheduling of groups. Exclusive is implemented in the
kernel, but wasn't exposed by the perf tool, so hard to use without
custom low level API users.
Add support for marking groups or events with :e for exclusive in the
perf tool. The implementation is basically the same as the existing
pinned attribute.
Committer testing:
# perf test "parse event"
6: Parse event definition strings : Ok
# perf test -v "parse event" |& grep :u*e
running test 56 'instructions:uep'
running test 57 '{cycles,cache-misses,branch-misses}:e'
#
#
# grep "model name" -m1 /proc/cpuinfo
model name : AMD Ryzen 9 3900X 12-Core Processor
#
# perf stat -a -e '{cycles,cache-misses,branch-misses}:e' sleep 1
Performance counter stats for 'system wide':
<not counted> cycles (0.00%)
<not counted> cache-misses (0.00%)
<not counted> branch-misses (0.00%)
1.001269893 seconds time elapsed
Some events weren't counted. Try disabling the NMI watchdog:
echo 0 > /proc/sys/kernel/nmi_watchdog
perf stat ...
echo 1 > /proc/sys/kernel/nmi_watchdog
# echo 0 > /proc/sys/kernel/nmi_watchdog
# perf stat -a -e '{cycles,cache-misses,branch-misses}:e' sleep 1
Performance counter stats for 'system wide':
1,298,663,141 cycles
30,962,215 cache-misses
5,325,150 branch-misses
1.001474934 seconds time elapsed
#
# The output for asking for precise events on AMD needs to improve, it
# supposedly works only for system wide or per CPU
#
# perf stat -a -e '{cycles,cache-misses,branch-misses}:uep' sleep 1
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (cycles).
/bin/dmesg | grep -i perf may provide additional information.
# perf stat -a -e '{cycles,cache-misses,branch-misses}:ue' sleep 1
Performance counter stats for 'system wide':
746,363,126 cycles
16,881,611 cache-misses
2,871,259 branch-misses
1.001636066 seconds time elapsed
#
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20201014144255.22699-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With shorter md5 build ids we need to align their paths properly with
other build ids:
$ perf buildid-list
17f4e448cc746582ea1881528deb549f7fdb3fd5 [kernel.kallsyms]
a50e350e97c43b4708d09bcd85ebfff7 .../tools/perf/buildid-ex-md5
1805c738c8f3ec0f47b7ea09080c28f34d18a82b /usr/lib64/ld-2.31.so
$
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20201013192441.1299447-9-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We do not store size with build ids in perf data, but there's enough
space to do it. Adding misc bit PERF_RECORD_MISC_BUILD_ID_SIZE to mark
build id event with size.
With this fix the dso with md5 build id will have correct build id data
and will be usable for debuginfod processing if needed (coming in
following patches).
Committer notes:
Use %zu with size_t to fix this error on 32-bit arches:
util/header.c: In function '__event_process_build_id':
util/header.c:2105:3: error: format '%lu' expects argument of type 'long unsigned int', but argument 6 has type 'size_t' [-Werror=format=]
pr_debug("build id event received for %s: %s [%lu]\n",
^
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20201013192441.1299447-8-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Passing build_id object to dso__build_id_equal(), so we can properly
check build id with different size than sha1.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20201013192441.1299447-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Passing build_id object to dso__set_build_id(), so it's easier
to initialize dos's build id object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20201013192441.1299447-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Passing build_id object to build_id__sprintf function, so it can operate
with the proper size of build id.
This will create proper md5 build id readable names,
like following:
a50e350e97c43b4708d09bcd85ebfff7
instead of:
a50e350e97c43b4708d09bcd85ebfff700000000
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20201013192441.1299447-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Passing build id object to sysfs__read_build_id function, so it can
populate the size of the build_id object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20201013192441.1299447-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass a build_id object to filename__read_build_id function, so it can
populate the size of the build_id object.
Changing filename__read_build_id() code for both ELF/non-ELF code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20201013192441.1299447-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Replace build_id byte array with struct build_id object and all the code
that references it.
The objective is to carry size together with build id array, so it's
better to keep both together.
This is preparatory change for following patches, and there's no
functional change.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20201013192441.1299447-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We'll use it to ask for extra config files to be loaded, profile like
stuff that will be used first to make 'perf trace' mimic 'strace' output
via a 'perf strace' command that just sets up 'perf trace' output.
At some point it'll be used for regression tests, where we'll run some
simple commands like:
perf strace ls > perf-strace.output
strace ls > strace.output
And then do some mutable syscall arg aware diff like tool to deal with
arguments for things like mmap, that change at each execution, to be
first ignored and then properly tracked when used accoss multiple
syscalls.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_event_attr bp_addr is a u64. parse-events.y parses it as a u64, but
casts it to a void* and then parse-events.c casts it back to a u64.
Rather than all the casts, change the type of the address to be a u64.
This removes an issue noted in:
https://lore.kernel.org/lkml/20200903184359.GC3495158@kernel.org/
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200925003903.561568-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation for a test case of expanding events for multiple
cgroups. Instead of using real system cgroup, the test will use fake
cgroups so it needs a way to have them without a open file descriptor.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200924124455.336326-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The metricgroup__copy_metric_events() is to handle metrics events when
expanding event for cgroups. As the metric events keep pointers to
evsel, it should be refreshed when events are cloned during the
operation.
The perf_stat__collect_metric_expr() is also called in case an event has
a metric directly.
During the copy, it references evsel by index as the evlist now has
cloned evsels for the given cgroup.
Also kernel test robot found an issue in the python module import so add
empty implementations of those two functions to fix it.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200924124455.336326-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --for-each-cgroup option is a syntax sugar to monitor large number
of cgroups easily. Current command line requires to list all the events
and cgroups even if users want to monitor same events for each cgroup.
This patch addresses that usage by copying given events for each cgroup
on user's behalf.
For instance, if they want to monitor 6 events for 200 cgroups each they
should write 1200 event names (with -e) AND 1200 cgroup names (with -G)
on the command line. But with this change, they can just specify 6
events and 200 cgroups with a new option.
A simpler example below: It wants to measure 3 events for 2 cgroups ('A'
and 'B'). The result is that total 6 events are counted like below.
$ perf stat -a -e cpu-clock,cycles,instructions --for-each-cgroup A,B sleep 1
Performance counter stats for 'system wide':
988.18 msec cpu-clock A # 0.987 CPUs utilized
3,153,761,702 cycles A # 3.200 GHz (100.00%)
8,067,769,847 instructions A # 2.57 insn per cycle (100.00%)
982.71 msec cpu-clock B # 0.982 CPUs utilized
3,136,093,298 cycles B # 3.182 GHz (99.99%)
8,109,619,327 instructions B # 2.58 insn per cycle (99.99%)
1.001228054 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200924124455.336326-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The evsel__clone() is to create an exactly same evsel from same
attributes. The function assumes the given evsel is not configured
yet so it cares fields set during event parsing. Those fields are now
moved together as Jiri suggested. Note that metric events will be
handled by later patch.
It will be used by perf stat to generate separate events for each
cgroup.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200924124455.336326-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-09-23
The following pull-request contains BPF updates for your *net-next* tree.
We've added 95 non-merge commits during the last 22 day(s) which contain
a total of 124 files changed, 4211 insertions(+), 2040 deletions(-).
The main changes are:
1) Full multi function support in libbpf, from Andrii.
2) Refactoring of function argument checks, from Lorenz.
3) Make bpf_tail_call compatible with functions (subprograms), from Maciej.
4) Program metadata support, from YiFei.
5) bpf iterator optimizations, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Two minor conflicts:
1) net/ipv4/route.c, adding a new local variable while
moving another local variable and removing it's
initial assignment.
2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
One pretty prints the port mode differently, whilst another
changes the driver to try and obtain the port mode from
the port node rather than the switch node.
Signed-off-by: David S. Miller <davem@davemloft.net>
The synthesized event TIME_CONV doesn't contain the complete parameters
for counters, this will lead to wrong conversion between counter cycles
and timestamp.
This patch extends event TIME_CONV to record flags 'cap_user_time_zero'
which is used to indicate the counter parameters are valid or not, if
not will directly return 0 for timestamp calculation. And record the
flag 'cap_user_time_short' and its relevant fields 'time_cycles' and
'time_mask' for cycle calibration.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kemeng Shi <shikemeng@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Gasson <nick.gasson@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steve Maclean <steve.maclean@microsoft.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zou Wei <zou_wei@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200914115311.2201-5-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf mmap'ed buffer contains the flag 'cap_user_time_short' and two
extra fields 'time_cycles' and 'time_mask', perf tool needs to know them
for handling the counter wrapping case.
This patch is to reads out the relevant parameters from the head of the
first mmap'ed page and stores into the structure 'perf_tsc_conversion',
if the flag 'cap_user_time_short' has been set, it will firstly
calibrate cycle value for timestamp calculation.
Committer testing:
Before/after:
# perf test tsc
70: Convert perf time to TSC : Ok
#
# perf test -v tsc
70: Convert perf time to TSC :
--- start ---
test child forked, pid 11059
mmap size 528384B
1st event perf time 996384576521 tsc 3850532906613
rdtsc time 996384578455 tsc 3850532913950
2nd event perf time 996384578845 tsc 3850532915428
test child finished with 0
---- end ----
Convert perf time to TSC: Ok
#
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kemeng Shi <shikemeng@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Gasson <nick.gasson@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steve Maclean <steve.maclean@microsoft.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zou Wei <zou_wei@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200914115311.2201-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Functions perf_read_tsc_conversion() and perf_event__synth_time_conv()
should work as common functions rather than x86 specific, so move these
two functions out from arch/x86 folder and place them into util/tsc.c.
Since the function perf_event__synth_time_conv() will be linked in
util/tsc.c, remove its weak version.
Committer testing:
Before/after:
# perf test tsc
70: Convert perf time to TSC : Ok
#
# perf test -v tsc
70: Convert perf time to TSC :
--- start ---
test child forked, pid 8520
mmap size 528384B
1st event perf time 592110439891 tsc 2317172044331
rdtsc time 592110441915 tsc 2317172052010
2nd event perf time 592110442336 tsc 2317172053605
test child finished with 0
---- end ----
Convert perf time to TSC: Ok
#
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kemeng Shi <shikemeng@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Gasson <nick.gasson@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steve Maclean <steve.maclean@microsoft.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zou Wei <zou_wei@huawei.com>
Link: http://lore.kernel.org/lkml/20200914115311.2201-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since 'perf probe' heavily depends on debuginfo, debuginfod gives us
many benefits on the 'perf probe' command on remote machine.
Especially, this will be helpful for the embedded devices which will not
have enough storage, or boot with a cross-build kernel whose source code
is in the host machine.
This will work as similar to commit c7a14fdcb3 ("perf build-ids:
Fall back to debuginfod query if debuginfo not found")
Tested with:
(host) $ cd PATH/TO/KBUILD/DIR/
(host) $ debuginfod -F .
...
(remote) # perf probe -L vfs_read
Failed to find the path for the kernel: No such file or directory
Error: Failed to show lines.
(remote) # export DEBUGINFOD_URLS="http://$HOST_IP:8002/"
(remote) # perf probe -L vfs_read
<vfs_read@...>
0 ssize_t vfs_read(struct file *file, char __user *buf, size_t count, loff_t *pos)
{
2 ssize_t ret;
if (!(file->f_mode & FMODE_READ))
return -EBADF;
6 if (!(file->f_mode & FMODE_CAN_READ))
return -EINVAL;
8 if (unlikely(!access_ok(buf, count)))
return -EFAULT;
11 ret = rw_verify_area(READ, file, pos, count);
12 if (ret)
return ret;
if (count > MAX_RW_COUNT)
...
(remote) # perf probe -a "vfs_read count"
Added new event:
probe:vfs_read (on vfs_read with count)
(remote) # perf probe -l
probe:vfs_read (on vfs_read@ksrc/linux/fs/read_write.c with count)
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Frank Ch. Eigler <fche@redhat.com>
Cc: Aaron Merey <amerey@redhat.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Link: http://lore.kernel.org/lkml/160041610083.912668.13659563860278615846.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf probe' uses ref_reloc_sym to adjust symbol offset address from
debuginfo address or ref_reloc_sym based address, but that is misusing
reloc_sym->addr and reloc_sym->unrelocated_addr. If map is not
relocated (map->reloc == 0), we can use reloc_sym->addr as unrelocated
address instead of reloc_sym->unrelocated_addr.
This usually does not happen. If we have a non-stripped ELF binary, we
will use it for map and debuginfo, if not, we use only kallsyms without
debuginfo. Thus, the map is always relocated (ELF and DWARF binary) or
not relocated (kallsyms).
However, if we allow the combination of debuginfo and kallsyms based map
(like using debuginfod), we have to check the map->reloc and choose the
collect address of reloc_sym.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Frank Ch. Eigler <fche@redhat.com>
Cc: Aaron Merey <amerey@redhat.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Link: http://lore.kernel.org/lkml/160041609047.912668.14314639291419159274.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A metric like DRAM_BW_Use has on SkylakeX events uncore_imc/cas_count_read/
and uncore_imc/case_count_write/.
These events open 6 events per socket with pmu names of
uncore_imc_[0-5].
The current metric setup code in find_evsel_group assumes one ID will
map to 1 event to be recorded in metric_events.
For events with multiple matches, the first event is recorded in
metric_events (avoiding matching >1 event with the same name) and the
evlist_used updated so that duplicate events aren't removed when the
evlist has unused events removed.
Before this change:
$ /tmp/perf/perf stat -M DRAM_BW_Use -a -- sleep 1
Performance counter stats for 'system wide':
41.14 MiB uncore_imc/cas_count_read/
1,002,614,251 ns duration_time
1.002614251 seconds time elapsed
After this change:
$ /tmp/perf/perf stat -M DRAM_BW_Use -a -- sleep 1
Performance counter stats for 'system wide':
157.47 MiB uncore_imc/cas_count_read/ # 0.00 DRAM_BW_Use
126.97 MiB uncore_imc/cas_count_write/
1,003,019,728 ns duration_time
Erroneous duplication introduced in:
commit 2440689d62 ("perf metricgroup: Remove duped metric group events").
Fixes: ded80bda8b ("perf expr: Migrate expr ids table to a hashmap").
Reported-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200917201807.4090224-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Icelake has support for reporting per thread TopDown metrics.
These are reported differently than the previous TopDown support,
each metric is standalone, but scaled to pipeline "slots".
We don't need to do anything special for HyperThreading anymore.
Teach perf stat --topdown to handle these new metrics and
print them in the same way as the previous TopDown metrics.
The restrictions of only being able to report information per core is
gone.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Co-developed-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200911144808.27603-4-kan.liang@linux.intel.com
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the hardware TopDown metrics feature, sample-read feature should be
supported for a topdown group, e.g., sample a non-topdown event and read
a topdown metric group. But the current perf record code errors out.
For a topdown metric group, the slots event must be the leader of the
group, but the leader slots event doesn't support sampling.
To support sample-read the topdown metric group, use the 2nd event of
the group as the "leader" for the purposes of sampling.
Only the platform with Topdown metic feature supports sample-read the
topdown group. Add arch_topdown_sample_read() to indicate whether the
topdown group supports sample-read.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200911144808.27603-3-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The group.h/c only include TopDown group related functions. The name
"group" is too generic and inaccurate. Use the name "topdown" to replace
it.
Move topdown related functions to a dedicated file, topdown.c.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200911144808.27603-2-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the machine__for_each_dso() to iterate over all dso objects defined
for the within a machine object. It will be used in the MMAP3 patch
series.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200913210313.1985612-22-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Like evlist cpu map, evsel's cpu map should have a proper refcount.
As it's created with a refcount, we don't need to get an extra count.
Thanks to Arnaldo for the simpler suggestion.
This, together with the following patch, fixes the following ASAN
report:
Direct leak of 840 byte(s) in 70 object(s) allocated from:
#0 0x7fe36703f628 in malloc (/lib/x86_64-linux-gnu/libasan.so.5+0x107628)
#1 0x559fbbf611ca in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
#2 0x559fbbf6229c in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:237
#3 0x559fbbcc6c6d in __add_event util/parse-events.c:357
#4 0x559fbbcc6c6d in add_event_tool util/parse-events.c:408
#5 0x559fbbcc6c6d in parse_events_add_tool util/parse-events.c:1414
#6 0x559fbbd8474d in parse_events_parse util/parse-events.y:439
#7 0x559fbbcc95da in parse_events__scanner util/parse-events.c:2096
#8 0x559fbbcc95da in __parse_events util/parse-events.c:2141
#9 0x559fbbc2788b in check_parse_id tests/pmu-events.c:406
#10 0x559fbbc2788b in check_parse_id tests/pmu-events.c:393
#11 0x559fbbc2788b in check_parse_fake tests/pmu-events.c:436
#12 0x559fbbc2788b in metric_parse_fake tests/pmu-events.c:553
#13 0x559fbbc27e2d in test_parsing_fake tests/pmu-events.c:599
#14 0x559fbbc27e2d in test_parsing_fake tests/pmu-events.c:574
#15 0x559fbbc0109b in run_test tests/builtin-test.c:410
#16 0x559fbbc0109b in test_and_print tests/builtin-test.c:440
#17 0x559fbbc03e69 in __cmd_test tests/builtin-test.c:695
#18 0x559fbbc03e69 in cmd_test tests/builtin-test.c:807
#19 0x559fbbc691f4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#20 0x559fbbb071a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#21 0x559fbbb071a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#22 0x559fbbb071a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#23 0x7fe366b68cc9 in __libc_start_main ../csu/libc-start.c:308
And I've failed which commit introduced this bug as the code was
heavily changed since then. ;-/
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200917060219.1287863-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf stat' displays miss ratio of L1-dcache, L1-icache, dTLB cache,
iTLB cache and LL-cache. Take L1-dcache for example, miss ratio is
caculated as "L1-dcache-load-misses/L1-dcache-loads". So "of all
L1-dcache hits" is unsuitable to describe it, and "of all L1-dcache
accesses" seems better.
The comments of L1-icache, dTLB cache, iTLB cache and LL-cache are
fixed in the same way.
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: linuxarm@huawei.com
Link: http://lore.kernel.org/lkml/1600253331-10535-1-git-send-email-liuqi115@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The following leaks were detected by ASAN:
Indirect leak of 360 byte(s) in 9 object(s) allocated from:
#0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e)
#1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333
#2 0x560578f752fc in perf_pmu_parse util/pmu.y:59
#3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73
#4 0x560578e07045 in test__pmu tests/pmu.c:155
#5 0x560578de109b in run_test tests/builtin-test.c:410
#6 0x560578de109b in test_and_print tests/builtin-test.c:440
#7 0x560578de401a in __cmd_test tests/builtin-test.c:661
#8 0x560578de401a in cmd_test tests/builtin-test.c:807
#9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308
Fixes: cff7f956ec ("perf tests: Move pmu tests into separate object")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-12-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's dangerous to free the original metric when it's called from
resolve_metric() as it's already in the metric_list and might have other
resources too. Instead, it'd better let them bail out and be released
properly at the later stage.
So add a check when it's called from metricgroup__add_metric() and
release it. Also make sure that mp is set properly.
Fixes: 83de0b7d53 ("perf metric: Collect referenced metrics in struct metric_ref_node")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-10-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The metricgroup__add_metric() can find multiple match for a metric group
and it's possible to fail. Also it can fail in the middle like in
resolve_metric() even for single metric.
In those cases, the intermediate list and ids will be leaked like:
Direct leak of 3 byte(s) in 1 object(s) allocated from:
#0 0x7f4c938f40b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5)
#1 0x55f7e71c1bef in __add_metric util/metricgroup.c:683
#2 0x55f7e71c31d0 in add_metric util/metricgroup.c:906
#3 0x55f7e71c3844 in metricgroup__add_metric util/metricgroup.c:940
#4 0x55f7e71c488d in metricgroup__add_metric_list util/metricgroup.c:993
#5 0x55f7e71c488d in parse_groups util/metricgroup.c:1045
#6 0x55f7e71c60a4 in metricgroup__parse_groups_test util/metricgroup.c:1087
#7 0x55f7e71235ae in __compute_metric tests/parse-metric.c:164
#8 0x55f7e7124650 in compute_metric tests/parse-metric.c:196
#9 0x55f7e7124650 in test_recursion_fail tests/parse-metric.c:318
#10 0x55f7e7124650 in test__parse_metric tests/parse-metric.c:356
#11 0x55f7e70be09b in run_test tests/builtin-test.c:410
#12 0x55f7e70be09b in test_and_print tests/builtin-test.c:440
#13 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661
#14 0x55f7e70c101a in cmd_test tests/builtin-test.c:807
#15 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#16 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#17 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#18 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#19 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308
Fixes: 83de0b7d53 ("perf metric: Collect referenced metrics in struct metric_ref_node")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test_generic_metric() missed to release entries in the pctx. Asan
reported following leak (and more):
Direct leak of 128 byte(s) in 1 object(s) allocated from:
#0 0x7f4c9396980e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e)
#1 0x55f7e748cc14 in hashmap_grow (/home/namhyung/project/linux/tools/perf/perf+0x90cc14)
#2 0x55f7e748d497 in hashmap__insert (/home/namhyung/project/linux/tools/perf/perf+0x90d497)
#3 0x55f7e7341667 in hashmap__set /home/namhyung/project/linux/tools/perf/util/hashmap.h:111
#4 0x55f7e7341667 in expr__add_ref util/expr.c:120
#5 0x55f7e7292436 in prepare_metric util/stat-shadow.c:783
#6 0x55f7e729556d in test_generic_metric util/stat-shadow.c:858
#7 0x55f7e712390b in compute_single tests/parse-metric.c:128
#8 0x55f7e712390b in __compute_metric tests/parse-metric.c:180
#9 0x55f7e712446d in compute_metric tests/parse-metric.c:196
#10 0x55f7e712446d in test_dcache_l2 tests/parse-metric.c:295
#11 0x55f7e712446d in test__parse_metric tests/parse-metric.c:355
#12 0x55f7e70be09b in run_test tests/builtin-test.c:410
#13 0x55f7e70be09b in test_and_print tests/builtin-test.c:440
#14 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661
#15 0x55f7e70c101a in cmd_test tests/builtin-test.c:807
#16 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#17 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#18 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#19 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#20 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308
Fixes: 6d432c4c8a ("perf tools: Add test_generic_metric function")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The evsel->unit borrows a pointer of pmu event or alias instead of
owns a string. But tool event (duration_time) passes a result of
strdup() caused a leak.
It was found by ASAN during metric test:
Direct leak of 210 byte(s) in 70 object(s) allocated from:
#0 0x7fe366fca0b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5)
#1 0x559fbbcc6ea3 in add_event_tool util/parse-events.c:414
#2 0x559fbbcc6ea3 in parse_events_add_tool util/parse-events.c:1414
#3 0x559fbbd8474d in parse_events_parse util/parse-events.y:439
#4 0x559fbbcc95da in parse_events__scanner util/parse-events.c:2096
#5 0x559fbbcc95da in __parse_events util/parse-events.c:2141
#6 0x559fbbc28555 in check_parse_id tests/pmu-events.c:406
#7 0x559fbbc28555 in check_parse_id tests/pmu-events.c:393
#8 0x559fbbc28555 in check_parse_cpu tests/pmu-events.c:415
#9 0x559fbbc28555 in test_parsing tests/pmu-events.c:498
#10 0x559fbbc0109b in run_test tests/builtin-test.c:410
#11 0x559fbbc0109b in test_and_print tests/builtin-test.c:440
#12 0x559fbbc03e69 in __cmd_test tests/builtin-test.c:695
#13 0x559fbbc03e69 in cmd_test tests/builtin-test.c:807
#14 0x559fbbc691f4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#15 0x559fbbb071a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#16 0x559fbbb071a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#17 0x559fbbb071a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#18 0x7fe366b68cc9 in __libc_start_main ../csu/libc-start.c:308
Fixes: f0fbb114e3 ("perf stat: Implement duration_time as a proper event")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Asan reported leak of cpu and thread maps as they have one more refcount
than released. I found that after setting evlist maps it should release
it's refcount.
It seems to be broken from the beginning so I chose the original commit
as the culprit. But not sure how it's applied to stable trees since
there are many changes in the code after that.
Fixes: 7e2ed09753 ("perf evlist: Store pointer to the cpu and thread maps")
Fixes: 4112eb1899 ("perf evlist: Default to syswide target when no thread/cpu maps set")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The metric_event_delete() missed to free expr->metric_events and it
should free an expr when metric_refs allocation failed.
Fixes: 4ea2896715 ("perf metric: Collect referenced metrics in struct metric_expr")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I found some memory leaks while reading the metric code. Some are real
and others only occur in the error path. When it failed during metric
or event parsing, it should release all resources properly.
Fixes: b18f3e3650 ("perf stat: Support JSON metrics in perf stat")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The aliases were never released causing the following leaks:
Indirect leak of 1224 byte(s) in 9 object(s) allocated from:
#0 0x7feefb830628 in malloc (/lib/x86_64-linux-gnu/libasan.so.5+0x107628)
#1 0x56332c8f1b62 in __perf_pmu__new_alias util/pmu.c:322
#2 0x56332c8f401f in pmu_add_cpu_aliases_map util/pmu.c:778
#3 0x56332c792ce9 in __test__pmu_event_aliases tests/pmu-events.c:295
#4 0x56332c792ce9 in test_aliases tests/pmu-events.c:367
#5 0x56332c76a09b in run_test tests/builtin-test.c:410
#6 0x56332c76a09b in test_and_print tests/builtin-test.c:440
#7 0x56332c76ce69 in __cmd_test tests/builtin-test.c:695
#8 0x56332c76ce69 in cmd_test tests/builtin-test.c:807
#9 0x56332c7d2214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#10 0x56332c6701a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#11 0x56332c6701a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#12 0x56332c6701a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#13 0x7feefb359cc9 in __libc_start_main ../csu/libc-start.c:308
Fixes: 956a78356c ("perf test: Test pmu-events aliases")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-11-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If events in a group explicitly set a frequency or period with leader
sampling, don't disable the samples on those events.
Prior to 5.8:
perf record -e '{cycles/period=12345000/,instructions/period=6789000/}:S'
would clear the attributes then apply the config terms. In commit
5f34278867 leader sampling configuration was moved to after applying the
config terms, in the example, making the instructions' event have its period
cleared.
This change makes it so that sampling is only disabled if configuration
terms aren't present.
Committer testing:
Before:
# perf record -e '{cycles/period=1/,instructions/period=2/}:S' sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.051 MB perf.data (6 samples) ]
#
# perf evlist -v
cycles/period=1/: size: 120, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|READ|ID, read_format: ID|GROUP, disabled: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1
instructions/period=2/: size: 120, config: 0x1, sample_type: IP|TID|TIME|READ|ID, read_format: ID|GROUP, sample_id_all: 1, exclude_guest: 1
#
After:
# perf record -e '{cycles/period=1/,instructions/period=2/}:S' sleep 0.0001
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.052 MB perf.data (4 samples) ]
# perf evlist -v
cycles/period=1/: size: 120, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|READ|ID, read_format: ID|GROUP, disabled: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1
instructions/period=2/: size: 120, config: 0x1, { sample_period, sample_freq }: 2, sample_type: IP|TID|TIME|READ|ID, read_format: ID|GROUP, sample_id_all: 1, exclude_guest: 1
#
Fixes: 5f34278867 ("perf evlist: Move leader-sampling configuration")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20200912025655.1337192-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before:
$ perf record -c 10000 --pfm-events=cycles:period=77777
Would yield a cycles event with period=10000, instead of 77777.
the event string and perf record initializing the event.
This was due to an ordering issue between libpfm4 parsing
events with attr->sample_period != 0 by the time
intent of the author.
perf_evsel__config() is invoked. This seems to have been the
This patch fixes the problem by preventing override for
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20200912025655.1337192-3-irogers@google.com
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
evsel__config() would only set PERF_RECORD_PERIOD if it set attr->freq
from perf record options. When it is set by libpfm events, it would not
get set. This changes evsel__config to see if attr->freq is set outside
of whether or not it changes attr->freq itself.
Signed-off-by: David Sharp <dhsharp@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: david sharp <dhsharp@google.com>
Link: http://lore.kernel.org/lkml/20200912025655.1337192-2-irogers@google.com
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds passing of pmu_event as a parameter in function
'arch_get_runtimeparam' which can be used to get details like if the
event is percore/perchip.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200907064133.75090-5-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add missing character.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200910032632.511566-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No need to set os.evsel twice.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200910032632.511566-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch from deprecated bpf_program__title() API to
bpf_program__section_name(). Also drop unnecessary error checks because
neither bpf_program__title() nor bpf_program__section_name() can fail or
return NULL.
Fixes: 5210958420 ("libbpf: Deprecate notion of BPF program "title" in favor of "section name"")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/bpf/20200908180127.1249-1-andriin@fb.com
It was printed unconditionally even if nothing is printed.
Check if the output list empty when filter is given.
Before:
$ ./perf list duration
List of pre-defined events (to be used in -e):
duration_time [Tool event]
Metric Groups:
After:
$ ./perf list duration
List of pre-defined events (to be used in -e):
duration_time [Tool event]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200909055849.469612-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We got slightly different patches removing a double word
in a comment in net/ipv4/raw.c - picked the version from net.
Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached
values instead of VNIC login response buffer (following what
commit 507ebe6444 ("ibmvnic: Fix use-after-free of VNIC login
response buffer") did).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add 'snapshot' control command to create an AUX area tracing snapshot
the same as if sending SIGUSR2. The advantage of the FIFO is that access
is governed by access to the FIFO.
Example:
$ mkfifo perf.control
$ mkfifo perf.ack
$ cat perf.ack &
[1] 15235
$ sudo ~/bin/perf record --control fifo:perf.control,perf.ack -S -e intel_pt//u -- sleep 60 &
[2] 15243
$ ps -e | grep perf
15244 pts/1 00:00:00 perf
$ kill -USR2 15244
bash: kill: (15244) - Operation not permitted
$ echo snapshot > perf.control
ack
$
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200901093758.32293-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Handle read errors from ctl_fd such as EINTR, EAGAIN and EWOULDBLOCK.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200901093758.32293-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Consolidate --control option parsing into one function, in preparation
for adding FIFO file name options.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200901093758.32293-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wine generates PE binaries for its code modules and also generates debug
files in PE or PDB formats, which perf cannot parse either.
Trying to read symbols on non-ELF binaries with libbfd, when supported,
makes it possible for perf to report symbols and annotations for Windows
applications running under Wine.
Because libbfd doesn't provide symbol size (probably because of some
backends not supporting it), we compute it by first sorting the symbols
by addresses and then considering that they are sequential in a given
section.
v3: Also include local and weak bfd symbols and mark them as such, only
global symbols were previously reported, and that caused a very
imprecise address to symbol resolution.
Signed-off-by: Remi Bernon <rbernon@codeweavers.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jacek Caban <jacek@codeweavers.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200821165238.1340315-2-rbernon@codeweavers.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wine generates PE binaries for most of its modules and perf is unable to
parse these files to get build_id or .gnu_debuglink section.
Using libbfd when available, instead of libelf, makes it possible to
resolve debug file location regardless of the dso binary format.
Committer notes:
Made the filename__read_build_id() variant that uses abfd->build_id
depend on the feature test that defines HAVE_LIBBFD_BUILDID_SUPPORT, to
get this to continue building with older libbfd/binutils.
Signed-off-by: Remi Bernon <rbernon@codeweavers.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jacek Caban <jacek@codeweavers.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200821165238.1340315-1-rbernon@codeweavers.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When validating kcore modules the do_validate_kcore_modules function
checks on every kernel module dso against modules record. The
__map__is_kmodule check is used to get only kernel module dso objects
through.
Currently the bpf images are slipping through the check and making the
validation to fail, so report falls back from kcore usage to kallsyms.
Adding __map__is_bpf_image check for bpf image and adding it to
__map__is_kmodule check.
Fixes: 3c29d4483e ("perf annotate: Add basic support for bpf_image")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200826213017.818788-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To address these errors found when cross building from x86_64 to MIPS
little endian 32-bit:
CC /tmp/build/perf/util/parse-events-bison.o
util/parse-events.y: In function 'parse_events_parse':
util/parse-events.y:514:6: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
514 | (void *) $2, $6, $4);
| ^
util/parse-events.y:531:7: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
531 | (void *) $2, NULL, $4)) {
| ^
util/parse-events.y:547:6: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
547 | (void *) $2, $4, 0);
| ^
util/parse-events.y:564:7: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
564 | (void *) $2, NULL, 0)) {
| ^
Fixes: cabbf26821 ("perf parse: Before yyabort-ing free components")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 42bbabed09 ("perf tools: Add hw_idx in struct branch_stack")
changed the format of branch stacks in perf samples. When samples use
this new format, a flag must be set in the corresponding event.
Synthesized branch stacks generated from Intel PT were using the new
format, but not setting the event attribute, leading to consumers
seeing corrupt data. This patch fixes the issue by setting the event
attribute to indicate use of the new format.
Fixes: 42bbabed09 ("perf tools: Add hw_idx in struct branch_stack")
Signed-off-by: Al Grant <al.grant@arm.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200819084751.17686-2-leo.yan@linaro.org
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 42bbabed09 ("perf tools: Add hw_idx in struct branch_stack")
changed the format of branch stacks in perf samples. When samples use
this new format, a flag must be set in the corresponding event.
Synthesized branch stacks generated from CoreSight ETM trace were using
the new format, but not setting the event attribute, leading to
consumers seeing corrupt data. This patch fixes the issue by setting the
event attribute to indicate use of the new format.
Fixes: 42bbabed09 ("perf tools: Add hw_idx in struct branch_stack")
Signed-off-by: Al Grant <al.grant@arm.com>
Reviewed-by: Andrea Brunato <andrea.brunato@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Link: http://lore.kernel.org/lkml/20200819084751.17686-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With a fake_pmu the pmu_info isn't populated by perf_pmu__check_alias.
In this case, don't try to copy the uninitialized values to the evsel.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200826042910.1902374-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix a compile error on F32 and gcc version 10.1 on s390 in file
utils/stat-display.c. The error does not show up with make DEBUG=y. In
fact the issue shows up when using both compiler options -O6 and
-D_FORTIFY_SOURCE=2 (which are omitted with DEBUG=Y).
This is the offending call chain:
print_counter_aggr()
printout(config, -1, 0, ...) with 2nd parm id set to -1
aggr_printout(config, x, id --> -1, ...) which leads to this code:
case AGGR_NONE:
if (evsel->percore && !config->percore_show_thread) {
....
} else {
fprintf(config->output, "CPU%*d%s",
config->csv_output ? 0 : -7,
evsel__cpus(evsel)->map[id],
^^ id is -1 !!!!
config->csv_sep);
}
This is a compiler inlining issue which is detected on s390 but not on
other plattforms.
Output before:
# make util/stat-display.o
.....
util/stat-display.c: In function ‘perf_evlist__print_counters’:
util/stat-display.c:121:4: error: array subscript -1 is below array
bounds of ‘int[]’ [-Werror=array-bounds]
121 | fprintf(config->output, "CPU%*d%s",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
122 | config->csv_output ? 0 : -7,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
123 | evsel__cpus(evsel)->map[id],
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
124 | config->csv_sep);
| ~~~~~~~~~~~~~~~~
In file included from util/evsel.h:13,
from util/evlist.h:13,
from util/stat-display.c:9:
/root/linux/tools/lib/perf/include/internal/cpumap.h:10:7:
note: while referencing ‘map’
10 | int map[];
| ^~~
cc1: all warnings being treated as errors
mv: cannot stat 'util/.stat-display.o.tmp': No such file or directory
make[3]: *** [/root/linux/tools/build/Makefile.build:97: util/stat-display.o]
Error 1
make[2]: *** [Makefile.perf:716: util/stat-display.o] Error 2
make[1]: *** [Makefile.perf:231: sub-make] Error 2
make: *** [Makefile:110: util/stat-display.o] Error 2
[root@t35lp46 perf]#
Output after:
# make util/stat-display.o
.....
CC util/stat-display.o
[root@t35lp46 perf]#
Committer notes:
Removed the removal of {} enclosing the multiline else block, as pointed
out by Jiri Olsa.
Suggested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200825063304.77733-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently if we run 'perf record -e cycles:u', exclude_guest=0.
But it doesn't make sense in most cases that we request for
user-space counting but we also get the guest report.
Of course, we also need to consider 'perf kvm' usage case that
authorized perf users on the host may only want to count guest user
space events. For example,
# perf kvm --guest record -e cycles:u
When we have 'exclude_guest=1' for 'perf kvm' usage, we may get nothing
from guest events.
To keep perf semantics consistent and clear, this patch sets
exclude_guest=1 for user-space counting but except for 'perf kvm' usage.
Before:
perf record -e cycles:u ./div
perf evlist -v
cycles:u: ..., exclude_kernel: 1, exclude_hv: 1, ...
After:
perf record -e cycles:u ./div
perf evlist -v
cycles:u: ..., exclude_kernel: 1, exclude_hv: 1, exclude_guest: 1, ...
Before:
perf kvm --guest record -e cycles:u -vvv
perf_event_attr:
size 120
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ID|CPU|PERIOD
read_format ID
disabled 1
inherit 1
exclude_kernel 1
exclude_hv 1
freq 1
sample_id_all 1
After:
perf kvm --guest record -e cycles:u -vvv
perf_event_attr:
size 120
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ID|CPU|PERIOD
read_format ID
disabled 1
inherit 1
exclude_kernel 1
exclude_hv 1
freq 1
sample_id_all 1
For Before/After, exclude_guest are both 0 for perf kvm usage.
perf test 6
6: Parse event definition strings : Ok
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Like Xu <like.xu@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200814012120.16647-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A couple of trivial fixes for using %zd for size_t in the code
supporting the ZSTD compression library.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200820212501.24421-1-chris@chris-wilson.co.uk
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In arm_spe_read_record(), when we are processing an events packet,
'decoder->packet.index' is the length of payload, which has been
transformed in payloadlen(). So correct the check of 'idx'.
Signed-off-by: Wei Li <liwei391@huawei.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200724072628.35904-1-liwei391@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The "mwait_idle_with_hints" one was already there, some compiler
artifact now adds this ".constprop.0" suffix, cover that one too.
At some point we need to put these in a special bucket and show it
somewhere on the screen.
Noticed building the kernel on a fedora:32 system using:
gcc version 10.2.1 20200723 (Red Hat 10.2.1-1) (GCC)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's trivial to handle missing ELF_C_MMAP_READ support in libelf the way that
objtool has solved it in
("774bec3fddcc objtool: Add fallback from ELF_C_READ_MMAP to ELF_C_READ").
So instead of having an entire feature detector for that, just do what objtool
does for perf and libbpf. And keep their Makefiles a bit simpler.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200819013607.3607269-5-andriin@fb.com
During a perf-record, use the -ldebuginfod API to query a debuginfod
server, should the debug data not be found in the usual system
locations. If successful, the usual $HOME/.debug dir is populated.
Tested with:
$ find .
.
./ctags-debuginfo-5.8-26.fc31.x86_64.rpm
./usr
./usr/lib
./usr/lib/debug
./usr/lib/debug/.build-id
./usr/lib/debug/.build-id/ca
./usr/lib/debug/.build-id/ca/46f6ae6a0cee57d85abc1d461c49074248908d
./usr/lib/debug/.build-id/ca/46f6ae6a0cee57d85abc1d461c49074248908d.debug
./usr/lib/debug/usr
./usr/lib/debug/usr/bin
./usr/lib/debug/usr/bin/ctags-5.8-26.fc31.x86_64.debug
$ debuginfod -F .
...
$ rm -rf ~/.debug/ ; mkdir ~/.debug
$ perf record make tags
BUILD: Doing 'make -j8' parallel build
GEN tags
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.107 MB perf.data (1483 samples) ]
$ find ~/.debug | grep ctags
/home/jolsa/.debug/usr/bin/ctags
/home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d
/home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/elf
/home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/probes
$ rm -rf ~/.debug/ ; mkdir ~/.debug
$ DEBUGINFOD_URLS=http://localhost:8002 perf record make tags
BUILD: Doing 'make -j8' parallel build
GEN tags
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.108 MB perf.data (1531 samples) ]
$ find ~/.debug | grep ctag
/home/jolsa/.debug/usr/bin/ctags
/home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d
/home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/debug
/home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/elf
/home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/probes
Note the 'debug' file is created in the last run.
Note that currently the debuginfo data are downloaded only on record path,
we still need add this support to perf build-id/report.. and test ;-)
Tested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Frank Ch. Eigler <fche@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan