A few more fixes for v4.17:
- A fix for a crash in scm_call_atomic on qcom platforms
- Display fix for Allwinner A10
- A fix that re-enables ethernet on Allwinner H3 (C.H.I.P et al)
- A fix for eMMC corruption on hikey
- i2c-gpio descriptor tables for ixp4xx
+ a small typo fix
-----BEGIN PGP SIGNATURE-----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=mga+
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A few more fixes for v4.17:
- a fix for a crash in scm_call_atomic on qcom platforms
- display fix for Allwinner A10
- a fix that re-enables ethernet on Allwinner H3 (C.H.I.P et al)
- a fix for eMMC corruption on hikey
- i2c-gpio descriptor tables for ixp4xx
... plus a small typo fix"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: Fix i2c-gpio GPIO descriptor tables
arm64: dts: hikey: Fix eMMC corruption regression
firmware: qcom: scm: Fix crash in qcom_scm_call_atomic1()
ARM: sun8i: v3s: fix spelling mistake: "disbaled" -> "disabled"
ARM: dts: sun4i: Fix incorrect clocks for displays
ARM: dts: sun8i: h3: Re-enable EMAC on Orange Pi One
I used bad names in my clumsiness when rewriting many board
files to use GPIO descriptors instead of platform data. A few
had the platform_device ID set to -1 which would indeed give
the device name "i2c-gpio".
But several had it set to >=0 which gives the names
"i2c-gpio.0", "i2c-gpio.1" ...
Fix the offending instances in the ARM tree. Sorry for the
mess.
Fixes: b2e6355559 ("i2c: gpio: Convert to use descriptors")
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Reported-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Allwinner fixes for 4.17
Here is a bunch of fixes for merge issues, typos and wrong clocks being
described for simplefb, resulting in non-working displays.
* tag 'sunxi-fixes-for-4.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: sun8i: v3s: fix spelling mistake: "disbaled" -> "disabled"
ARM: dts: sun4i: Fix incorrect clocks for displays
ARM: dts: sun8i: h3: Re-enable EMAC on Orange Pi One
Signed-off-by: Olof Johansson <olof@lixom.net>
This reverts the following commits that change CMA design in MM.
3d2054ad8c ("ARM: CMA: avoid double mapping to the CMA area if CONFIG_HIGHMEM=y")
1d47a3ec09 ("mm/cma: remove ALLOC_CMA")
bad8c6c0b1 ("mm/cma: manage the memory of the CMA area by using the ZONE_MOVABLE")
Ville reported a following error on i386.
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
microcode: microcode updated early to revision 0x4, date = 2013-06-28
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:00118000)
Initializing Movable for node 0 (00000001:00118000)
BUG: Bad page state in process swapper pfn:377fe
page:f53effc0 count:0 mapcount:-127 mapping:00000000 index:0x0
flags: 0x80000000()
raw: 80000000 00000000 00000000 ffffff80 00000000 00000100 00000200 00000001
page dumped because: nonzero mapcount
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 4.17.0-rc5-elk+ #145
Hardware name: Dell Inc. Latitude E5410/03VXMC, BIOS A15 07/11/2013
Call Trace:
dump_stack+0x60/0x96
bad_page+0x9a/0x100
free_pages_check_bad+0x3f/0x60
free_pcppages_bulk+0x29d/0x5b0
free_unref_page_commit+0x84/0xb0
free_unref_page+0x3e/0x70
__free_pages+0x1d/0x20
free_highmem_page+0x19/0x40
add_highpages_with_active_regions+0xab/0xeb
set_highmem_pages_init+0x66/0x73
mem_init+0x1b/0x1d7
start_kernel+0x17a/0x363
i386_start_kernel+0x95/0x99
startup_32_smp+0x164/0x168
The reason for this error is that the span of MOVABLE_ZONE is extended
to whole node span for future CMA initialization, and, normal memory is
wrongly freed here. I submitted the fix and it seems to work, but,
another problem happened.
It's so late time to fix the later problem so I decide to reverting the
series.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull ARM fixes from Russell King:
- Łukasz Stelmach spotted a couple of issues with the decompressor.
- a couple of kdump fixes found while testing kdump
- replace some perl with shell code
- resolve SIGFPE breakage
- kprobes fixes
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: fix kill( ,SIGFPE) breakage
ARM: 8772/1: kprobes: Prohibit kprobes on get_user functions
ARM: 8771/1: kprobes: Prohibit kprobes on do_undefinstr
ARM: 8770/1: kprobes: Prohibit probing on optimized_callback
ARM: 8769/1: kprobes: Fix to use get_kprobe_ctlblk after irq-disabed
ARM: replace unnecessary perl with sed and the shell $(( )) operator
ARM: kexec: record parent context registers for non-crash CPUs
ARM: kexec: fix kdump register saving on panic()
ARM: 8758/1: decompressor: restore r1 and r2 just before jumping to the kernel
ARM: 8753/1: decompressor: add a missing parameter to the addruart macro
A handful of fixes. I've been queuing them up a bit too long so the list
is longer than it otherwise would have been spread out across a few -rcs.
In general, it's a scattering of fixes across several platforms, nothing
truly serious enough to point out.
There's a slightly larger batch of them for the Davinci platforms due
to work to bring them back to life after some time, so there's a handful
of regressions, some of them going back very far, others more recent.
There's also a few patches fixing DT on Renesas platforms since they
changed some bindings without remaining backwards compatible, splitting
up describing LVDS as a proper bridge instead of having it as part of the
display unit. We could push for them to be backwards compatible with old
device trees, but it's likely to regress eventually if nobody's actually
using said compatibility.
-----BEGIN PGP SIGNATURE-----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=qPpk
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A handful of fixes. I've been queuing them up a bit too long so the
list is longer than it otherwise would have been spread out across a
few -rcs.
In general, it's a scattering of fixes across several platforms,
nothing truly serious enough to point out.
There's a slightly larger batch of them for the Davinci platforms due
to work to bring them back to life after some time, so there's a
handful of regressions, some of them going back very far, others more
recent.
There's also a few patches fixing DT on Renesas platforms since they
changed some bindings without remaining backwards compatible,
splitting up describing LVDS as a proper bridge instead of having it
as part of the display unit.
We could push for them to be backwards compatible with old device
trees, but it's likely to regress eventually if nobody's actually
using said compatibility"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (36 commits)
ARM: davinci: board-dm646x-evm: set VPIF capture card name
ARM: davinci: board-dm646x-evm: pass correct I2C adapter id for VPIF
ARM: davinci: dm646x: fix timer interrupt generation
ARM: keystone: fix platform_domain_notifier array overrun
arm64: dts: exynos: Fix interrupt type for I2S1 device on Exynos5433
ARM: dts: imx51-zii-rdu1: fix touchscreen bindings
firmware: arm_scmi: Use after free in scmi_create_protocol_device()
ARM: dts: cygnus: fix irq type for arm global timer
Revert "ARM: dts: logicpd-som-lv: Fix pinmux controller references"
tee: check shm references are consistent in offset/size
tee: shm: fix use-after-free via temporarily dropped reference
ARM: dts: imx7s: Pass the 'fsl,sec-era' property
ARM: dts: tegra20: Revert "Fix ULPI regression on Tegra20"
ARM: dts: correct missing "compatible" entry for ti81xx SoCs
ARM: OMAP1: ams-delta: fix deferred_fiq handler
arm64: tegra: Make BCM89610 PHY interrupt as active low
ARM: davinci: fix GPIO lookup for I2C
ARM: dts: logicpd-som-lv: Fix pinmux controller references
ARM: dts: logicpd-som-lv: Fix Audio Mute
ARM: dts: logicpd-som-lv: Fix WL127x Startup Issues
...
Commit 7771c66457 ("signal/arm: Document conflicts with SI_USER and
SIGFPE") broke the siginfo structure for userspace triggered signals,
causing the strace testsuite to regress. Fix this by eliminating
the FPE_FIXME definition (which is at the root of the breakage) and
use FPE_FLTINV instead for the case where the hardware appears to be
reporting nonsense.
Fixes: 7771c66457 ("signal/arm: Document conflicts with SI_USER and SIGFPE")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Since do_undefinstr() uses get_user to get the undefined
instruction, it can be called before kprobes processes
recursive check. This can cause an infinit recursive
exception.
Prohibit probing on get_user functions.
Fixes: 24ba613c9d ("ARM kprobes: core code")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Prohibit kprobes on do_undefinstr because kprobes on
arm is implemented by undefined instruction. This means
if we probe do_undefinstr(), it can cause infinit
recursive exception.
Fixes: 24ba613c9d ("ARM kprobes: core code")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Prohibit probing on optimized_callback() because
it is called from kprobes itself. If we put a kprobes
on it, that will cause a recursive call loop.
Mark it NOKPROBE_SYMBOL.
Fixes: 0dc016dbd8 ("ARM: kprobes: enable OPTPROBES for ARM 32")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Since get_kprobe_ctlblk() uses smp_processor_id() to access
per-cpu variable, it hits smp_processor_id sanity check as below.
[ 7.006928] BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
[ 7.007859] caller is debug_smp_processor_id+0x20/0x24
[ 7.008438] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1-00192-g4eb17253e4b5 #1
[ 7.008890] Hardware name: Generic DT based system
[ 7.009917] [<c0313f0c>] (unwind_backtrace) from [<c030e6d8>] (show_stack+0x20/0x24)
[ 7.010473] [<c030e6d8>] (show_stack) from [<c0c64694>] (dump_stack+0x84/0x98)
[ 7.010990] [<c0c64694>] (dump_stack) from [<c071ca5c>] (check_preemption_disabled+0x138/0x13c)
[ 7.011592] [<c071ca5c>] (check_preemption_disabled) from [<c071ca80>] (debug_smp_processor_id+0x20/0x24)
[ 7.012214] [<c071ca80>] (debug_smp_processor_id) from [<c03335e0>] (optimized_callback+0x2c/0xe4)
[ 7.013077] [<c03335e0>] (optimized_callback) from [<bf0021b0>] (0xbf0021b0)
To fix this issue, call get_kprobe_ctlblk() right after
irq-disabled since that disables preemption.
Fixes: 0dc016dbd8 ("ARM: kprobes: enable OPTPROBES for ARM 32")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
You can build a kernel in a cross compiling environment that doesn't
have perl in the $PATH. Commit 429f7a062e broke that for 32 bit
ARM. Fix it.
As reported by Stephen Rothwell, it appears that the symbols can be
either part of the BSS section or absolute symbols depending on the
binutils version. When they're an absolute symbol, the $(( ))
operator errors out and the build fails. Fix this as well.
Fixes: 429f7a062e ("ARM: decompressor: fix BSS size calculation")
Reported-by: Rob Landley <rob@landley.net>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Rob Landley <rob@landley.net>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
How we got to machine_crash_nonpanic_core() (iow, from an IPI, etc) is
not interesting for debugging a crash. The more interesting context
is the parent context prior to the IPI being received.
Record the parent context register state rather than the register state
in machine_crash_nonpanic_core(), which is more relevant to the failing
condition.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
When a panic() occurs, the kexec code uses smp_send_stop() to stop
the other CPUs, but this results in the CPU register state not being
saved, and gdb is unable to inspect the state of other CPUs.
Commit 0ee59413c9 ("x86/panic: replace smp_send_stop() with kdump
friendly version in panic path") addressed the issue on x86, but
ignored other architectures. Address the issue on ARM by splitting
out the crash stop implementation to crash_smp_send_stop() and
adding the necessary protection.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The hypervisor setup before __enter_kernel destroys the value
sotred in r1. The value needs to be restored just before the jump.
Fixes: 6b52f7bdb8 ("ARM: hyp-stub: Use r1 for the soft-restart address")
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
In commit 639da5ee37 ("ARM: add an extra temp register to the low
level debugging addruart macro") an additional temporary register was
added to the addruart macro, but the decompressor code wasn't updated.
Fixes: 639da5ee37 ("ARM: add an extra temp register to the low level debugging addruart macro")
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
* x86 fixes: PCID, UMIP, locking
* Improved support for recent Windows version that have a 2048 Hz
APIC timer.
* Rename KVM_HINTS_DEDICATED CPUID bit to KVM_HINTS_REALTIME
* Better behaved selftests.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJa/bkTAAoJEL/70l94x66Dzf8IAJ1GqtXi0CNbq8MvU4QIqw0L
HLIRoe/QgkTeTUa2fwirEuu5I+/wUyPvy5sAIsn/F5eiZM7nciLm+fYzw6F2uPIm
lSCqKpVwmh8dPl1SBaqPnTcB1HPVwcCgc2SF9Ph7yZCUwFUtoeUuPj8v6Qy6y21g
jfobHFZa3MrFgi7kPxOXSrC1qxuNJL9yLB5mwCvCK/K7jj2nrGJkLLDuzgReCqvz
isOdpof3hz8whXDQG5cTtybBgE9veym4YqJY8R5ANXBKqbFlhaNF1T3xXrdPMISZ
7bsGgkhYEOqeQsPrFwzAIiFxe2DogFwkn1BcvJ1B+duXrayt5CBnDPRB6Yxg00M=
=H0d0
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- ARM/ARM64 locking fixes
- x86 fixes: PCID, UMIP, locking
- improved support for recent Windows version that have a 2048 Hz APIC
timer
- rename KVM_HINTS_DEDICATED CPUID bit to KVM_HINTS_REALTIME
- better behaved selftests
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: rename KVM_HINTS_DEDICATED to KVM_HINTS_REALTIME
KVM: arm/arm64: VGIC/ITS save/restore: protect kvm_read_guest() calls
KVM: arm/arm64: VGIC/ITS: protect kvm_read_guest() calls with SRCU lock
KVM: arm/arm64: VGIC/ITS: Promote irq_lock() in update_affinity
KVM: arm/arm64: Properly protect VGIC locks from IRQs
KVM: X86: Lower the default timer frequency limit to 200us
KVM: vmx: update sec exec controls for UMIP iff emulating UMIP
kvm: x86: Suppress CR3_PCID_INVD bit only when PCIDs are enabled
KVM: selftests: exit with 0 status code when tests cannot be run
KVM: hyperv: idr_find needs RCU protection
x86: Delay skip of emulated hypercall instruction
KVM: Extend MAX_IRQ_ROUTES to 4096 for all archs
They are needed for DM6467 EVM to work. The first patch fixes an
issue with timer interrupt and the second two are needed for video
driver to probe successfully.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Ep7k
-----END PGP SIGNATURE-----
Merge tag 'davinci-fixes-for-v4.17-part-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes
Second set of fixes for TI DaVinci.
They are needed for DM6467 EVM to work. The first patch fixes an
issue with timer interrupt and the second two are needed for video
driver to probe successfully.
* tag 'davinci-fixes-for-v4.17-part-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: board-dm646x-evm: set VPIF capture card name
ARM: davinci: board-dm646x-evm: pass correct I2C adapter id for VPIF
ARM: davinci: dm646x: fix timer interrupt generation
Signed-off-by: Olof Johansson <olof@lixom.net>
kvm_read_guest() will eventually look up in kvm_memslots(), which requires
either to hold the kvm->slots_lock or to be inside a kvm->srcu critical
section.
In contrast to x86 and s390 we don't take the SRCU lock on every guest
exit, so we have to do it individually for each kvm_read_guest() call.
Provide a wrapper which does that and use that everywhere.
Note that ending the SRCU critical section before returning from the
kvm_read_guest() wrapper is safe, because the data has been *copied*, so
we don't need to rely on valid references to the memslot anymore.
Cc: Stable <stable@vger.kernel.org> # 4.8+
Reported-by: Jan Glauber <jan.glauber@caviumnetworks.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VPIF capture driver expects card name to be set since it
uses it without checking for NULL. The commit which
introduced VPIF display and capture support added card
name only for display, not for capture.
Set it in platform data to probe driver successfully.
While at it, also fix the display card name to something more
appropriate.
Fixes: 85609c1ccd ("DaVinci: DM646x - platform changes for vpif capture and display drivers")
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
commit a16cb91ad9 ("[media] media: vpif: use a configurable
i2c_adapter_id for vpif display") removed hardcoded I2C adaptor
setting in VPIF driver, but missed updating platform data passed
from DM646x board.
Fix it.
Fixes: a16cb91ad9 ("[media] media: vpif: use a configurable i2c_adapter_id for vpif display")
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
commit b38434145b ("ARM: davinci: irqs: Correct McASP1 TX interrupt
definition for DM646x") inadvertently removed priority setting for
timer0_12 (bottom half of timer0). This timer is used as clockevent.
When INTPRIn register setting for an interrupt is left at 0, it is
mapped to FIQ by the AINTC causing the timer interrupt to not get
generated.
Fix it by including an entry for timer0_12 in interrupt priority map
array. While at it, move the clockevent comment to the right place.
Fixes: b38434145b ("ARM: davinci: irqs: Correct McASP1 TX interrupt definition for DM646x")
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
platform_domain_notifier contains a variable sized array, which the
pm_clk_notify() notifier treats as a NULL terminated array:
for (con_id = clknb->con_ids; *con_id; con_id++)
pm_clk_add(dev, *con_id);
Omitting the initialiser for con_ids means that the array is zero
sized, and there is no NULL terminator. This leads to pm_clk_notify()
overrunning into what ever structure follows, which may not be NULL.
This leads to an oops:
Unable to handle kernel NULL pointer dereference at virtual address 0000008c
pgd = c0003000
[0000008c] *pgd=80000800004003c, *pmd=00000000c
Internal error: Oops: 206 [#1] PREEMPT SMP ARM
Modules linked in:c
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0+ #9
Hardware name: Keystone
PC is at strlen+0x0/0x34
LR is at kstrdup+0x18/0x54
pc : [<c0623340>] lr : [<c0111d6c>] psr: 20000013
sp : eec73dc0 ip : eed780c0 fp : 00000001
r10: 00000000 r9 : 00000000 r8 : eed71e10
r7 : 0000008c r6 : 0000008c r5 : 014000c0 r4 : c03a6ff4
r3 : c09445d0 r2 : 00000000 r1 : 014000c0 r0 : 0000008c
Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 30c5387d Table: 00003000 DAC: fffffffd
Process swapper/0 (pid: 1, stack limit = 0xeec72210)
Stack: (0xeec73dc0 to 0xeec74000)
...
[<c0623340>] (strlen) from [<c0111d6c>] (kstrdup+0x18/0x54)
[<c0111d6c>] (kstrdup) from [<c03a6ff4>] (__pm_clk_add+0x58/0x120)
[<c03a6ff4>] (__pm_clk_add) from [<c03a731c>] (pm_clk_notify+0x64/0xa8)
[<c03a731c>] (pm_clk_notify) from [<c004614c>] (notifier_call_chain+0x44/0x84)
[<c004614c>] (notifier_call_chain) from [<c0046320>] (__blocking_notifier_call_chain+0x48/0x60)
[<c0046320>] (__blocking_notifier_call_chain) from [<c0046350>] (blocking_notifier_call_chain+0x18/0x20)
[<c0046350>] (blocking_notifier_call_chain) from [<c0390234>] (device_add+0x36c/0x534)
[<c0390234>] (device_add) from [<c047fc00>] (of_platform_device_create_pdata+0x70/0xa4)
[<c047fc00>] (of_platform_device_create_pdata) from [<c047fea0>] (of_platform_bus_create+0xf0/0x1ec)
[<c047fea0>] (of_platform_bus_create) from [<c047fff8>] (of_platform_populate+0x5c/0xac)
[<c047fff8>] (of_platform_populate) from [<c08b1f04>] (of_platform_default_populate_init+0x8c/0xa8)
[<c08b1f04>] (of_platform_default_populate_init) from [<c000a78c>] (do_one_initcall+0x3c/0x164)
[<c000a78c>] (do_one_initcall) from [<c087bd9c>] (kernel_init_freeable+0x10c/0x1d0)
[<c087bd9c>] (kernel_init_freeable) from [<c0628db0>] (kernel_init+0x8/0xf0)
[<c0628db0>] (kernel_init) from [<c00090d8>] (ret_from_fork+0x14/0x3c)
Exception stack(0xeec73fb0 to 0xeec73ff8)
3fa0: 00000000 00000000 00000000 00000000
3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
3fe0: 00000000 00000000 00000000 00000000 00000013 00000000
Code: e3520000 1afffff7 e12fff1e c0801730 (e5d02000)
---[ end trace cafa8f148e262e80 ]---
Fix this by adding the necessary initialiser.
Fixes: fc20ffe121 ("ARM: keystone: add PM domain support for clock management")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add missing 'fsl,sec-era' property for i.MX7S device tree CAAM node,
as the era information is used in various places inside CAAM driver.
- There are a few errors in imx51-zii-rdu1 device tree touchscreen
node. Fix them to get touchscreen actually work.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJa+SwfAAoJEFBXWFqHsHzOgO0H/3SfW3P816gDaJAPmKIt+2t8
XN7bVjJKwC6dv16L6Qf4R5xkdZwMFqelU9euObl/mDoXZvhk1IWLgmMfJJewTzDQ
fztoRU5kFMbOrmWItjrhsw0SV+mhqEpNdQ+HP1KKU4YNDepHA+xvvGN3KttlM7OT
XsNtKbFyYlwaHaU5qwcfTQxwmdsXSoNlZa727KXULQ5v7BTP9w+t8BPDbSfUezQe
mYcXx0IPytHjp7UU57ZmNiPRNPtSQA6ZaEPkzk9oNvnF2wIAdYKg8leqyB8/4xhR
nIprdefB2A9dODnLr4u0Gtn4YgMbbwRHzswbX2qMjgUob/H27n6Sg1QYol7Pcys=
=dU4h
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
i.MX fixes for 4.17:
- Add missing 'fsl,sec-era' property for i.MX7S device tree CAAM node,
as the era information is used in various places inside CAAM driver.
- There are a few errors in imx51-zii-rdu1 device tree touchscreen
node. Fix them to get touchscreen actually work.
* tag 'imx-fixes-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx51-zii-rdu1: fix touchscreen bindings
ARM: dts: imx7s: Pass the 'fsl,sec-era' property
Signed-off-by: Olof Johansson <olof@lixom.net>
This series of patches contains one BUG fix for trace if
CONFIG_DEBUG_PREEMPT is enabled and a regression fix for omap1 FIQ
handling on ams-delta. Then there's a dts fix for missing SoC
compatible on ti81xx board dts files that did matter until we added
the clkctrl clocks and without that some clocks are now not found.
Then there are two logicpd-som-lv specific dts fixes that fix
misconfigured pins for WLAN and audio. Turns out we had to revert
the third one because it caused another regression for USB.
-----BEGIN PGP SIGNATURE-----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=SBDB
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v17/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omap variants for v4.17
This series of patches contains one BUG fix for trace if
CONFIG_DEBUG_PREEMPT is enabled and a regression fix for omap1 FIQ
handling on ams-delta. Then there's a dts fix for missing SoC
compatible on ti81xx board dts files that did matter until we added
the clkctrl clocks and without that some clocks are now not found.
Then there are two logicpd-som-lv specific dts fixes that fix
misconfigured pins for WLAN and audio. Turns out we had to revert
the third one because it caused another regression for USB.
* tag 'omap-for-v17/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
Revert "ARM: dts: logicpd-som-lv: Fix pinmux controller references"
ARM: dts: correct missing "compatible" entry for ti81xx SoCs
ARM: OMAP1: ams-delta: fix deferred_fiq handler
ARM: dts: logicpd-som-lv: Fix pinmux controller references
ARM: dts: logicpd-som-lv: Fix Audio Mute
ARM: dts: logicpd-som-lv: Fix WL127x Startup Issues
ARM: OMAP2+: powerdomain: use raw_smp_processor_id() for trace
Signed-off-by: Olof Johansson <olof@lixom.net>
4.17, please pull the following:
- Clement fixes in an incorrect trigger type for the ARM global timers
on the Cygnus platforms
-----BEGIN PGP SIGNATURE-----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=uM7v
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.17/devicetree-fixes' of https://github.com/Broadcom/stblinux into fixes
This pull request contains Broadcom ARM-basec SoCs Device Tree fixes for
4.17, please pull the following:
- Clement fixes in an incorrect trigger type for the ARM global timers
on the Cygnus platforms
* tag 'arm-soc/for-4.17/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: cygnus: fix irq type for arm global timer
Signed-off-by: Olof Johansson <olof@lixom.net>
This contains a single revert for a patch that was merged in v4.17-rc1
and that turns out to cause a regression on some boards. Further, the
original issue that the patch was supposed to fix seems to have
disappeared.
-----BEGIN PGP SIGNATURE-----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=dgSr
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into fixes
ARM: tegra: Device tree fixes for v4.17
This contains a single revert for a patch that was merged in v4.17-rc1
and that turns out to cause a regression on some boards. Further, the
original issue that the patch was supposed to fix seems to have
disappeared.
* tag 'tegra-for-4.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: dts: tegra20: Revert "Fix ULPI regression on Tegra20"
Signed-off-by: Olof Johansson <olof@lixom.net>
Fix LVDS output on Gen2 boards
Laurent Pincart says "This patch series fixes LVDS output support on the
Lager, Koelsh, Porter and Gose boards that broke in v4.17-rc1 due to the
combination of the R-Car DU LVDS driver rework and the DT move of all
on-SoC peripherals to a /soc node.
We could handle the problem in the R-Car DU LVDS DT backward compatibility
code, but that fix would only be used for v4.17 as in v4.18 the Gen2 DT
will move to the new LVDS DT bindings. I thus propose merging these three
patches in v4.17 already to fix the problem as this is the simplest
solution."
-----BEGIN PGP SIGNATURE-----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=FqQ5
-----END PGP SIGNATURE-----
Merge tag 'renesas-fixes-for-v4.17' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
Renesas ARM Based SoC Fixes for v4.17
Fix LVDS output on Gen2 boards
Laurent Pincart says "This patch series fixes LVDS output support on the
Lager, Koelsh, Porter and Gose boards that broke in v4.17-rc1 due to the
combination of the R-Car DU LVDS driver rework and the DT move of all
on-SoC peripherals to a /soc node.
We could handle the problem in the R-Car DU LVDS DT backward compatibility
code, but that fix would only be used for v4.17 as in v4.18 the Gen2 DT
will move to the new LVDS DT bindings. I thus propose merging these three
patches in v4.17 already to fix the problem as this is the simplest
solution."
* tag 'renesas-fixes-for-v4.17' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: dts: r8a7793: Convert to new LVDS DT bindings
ARM: dts: r8a7791: Convert to new LVDS DT bindings
ARM: dts: r8a7790: Convert to new LVDS DT bindings
Signed-off-by: Olof Johansson <olof@lixom.net>
Commit d50f4630c2 ("arm: dts: Remove p1010-flexcan compatible from imx
series dts") removed the fallback compatible "fsl,p1010-flexcan" from
the imx device trees. As the flexcan cores on i.MX25, i.MX35 and i.MX53
are identical, introduce the first as fallback for the two latter ones.
Fixes: d50f4630c2 ("arm: dts: Remove p1010-flexcan compatible from imx series dts")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: linux-stable <stable@vger.kernel.org> # >= v4.16
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
As per ARM documentation
PPI(0) ID27 - global timer interrupt is rising-edge sensitive.
set IRQ triggering type to IRQ_TYPE_EDGE_RISING for ARM Global timers.
Fixes: c9ad7bc5fe ("ARM: dts: Enable Broadcom Cygnus SoC")
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Currently the following error is seen from the CAAM driver:
caam 30900000.caam: device ID = 0x0a16030000000000 (Era -524)
Pass the 'fsl,sec-era' property to properly describe the
era information.
This error happens because the 'fsl,sec-era' is not passed via
device tree.
The era information is used in various places inside drivers/crypto/caam,
so pass the correct version via device tree.
Fixes: 0eeabcad7d ("ARM: dts: imx7s: add CAAM device node")
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Commit 4c9a27a6c6 ("ARM: tegra: Fix ULPI regression on Tegra20") changed
"ulpi-link" clock from CDEV2 to PLL_P_OUT4. Turned out that PLL_P_OUT4 is
the parent of CDEV2 clock and original clock setup of "ulpi-link" was
correct. The reverted patch was fixing USB for one board and broke the
other, now Tegra's clk driver correctly sets parent for the CDEV2 clock
and hence patch could be reverted safely, restoring USB for all of the
boards.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Marcel Ziswiler <marcel@ziswiler.com>
Tested-by: Marcel Ziswiler <marcel@ziswiler.com>
Tested-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The missing "compatible" entries are needed by drivers/clk/ti/clkctrl.c,
and without them the structures initialized in drivers/clk/ti/clk-814x.c
are not passed to configuration code. The result is a "not found from
clkctrl data" error message, although boot proceeds anyway.
The reason why the compatible is not found is because the board specific
files override the SoC compatible without including it. This did not
cause any issues until with the clkctrl nodes got introduced.
Very lightly tested on a (lurching) AM3874 design that's in the middle
of a kernel upgrade from TI's abandoned 2.6.37 tree.
Also tested on j5eco-evm and hp-t410 to verify the clkctrl clocks are
found.
Fixes: bb30465b59 ("ARM: dts: dm814x: add clkctrl nodes")
Fixes: 80a06c0d83 ("ARM: dts: dm816x: add clkctrl nodes")
Signed-off-by: Graeme Smecher <gsmecher@threespeedlogic.com>
[tony: updated to fix for 8168-evm, updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
The deferred_fiq handler used to limit hardware operations to IRQ
unmask only, relying on gpio-omap assigned handler performing the ACKs.
Since commit 80ac93c274 ("gpio: omap: Fix lost edge interrupts") this
is no longer the case as handle_edge_irq() has been replaced with
handle_simmple_irq() which doesn't touch the hardware.
Add single ACK operation per each active IRQ pin to the handler. While
being at it, move unmask operation out of irq_counter loop so it is
also called only once for each active IRQ pin.
Fixes: 80ac93c274 ("gpio: omap: Fix lost edge interrupts")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Trivial fix to spelling mistake in status text string
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The GPIO chip is called davinci_gpio.0 in legacy mode. Fix it, so that
I2C can correctly lookup the recovery gpios.
Note that it is the gpio-davinci driver that sets the gpiochip label to
davinci_gpio.0.
Also, the I2C device uses an id of 1 on DM644x and DM355.
While at it, convert to using GPIO_TO_PIN() for referring to GPIO pin
numbers, like it is done in rest of the board support files.
Fixes: e535376537 ("i2c/ARM: davinci: Deep refactoring of I2C recovery")
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The pinmux controllers do not themselves need references to
'pinctrl-names' or 'pinctrl-0'
This patch removes some unnecessary typos.
Fixes: 89077c7145 ("ARM: dts: Add HSUSB2 EHCI Support to Logic PD DM37xx
SOM-LV")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The Audio has worked, but the mute pin has a weak pulldown which alows
some of the audio signal to pass very quietly. This patch fixes
that so the mute pin is actively driven high for mute or low for normal
operation.
Fixes: ab8dd3aed0 ("ARM: DTS: Add minimal Support for Logic
PD DM3730 SOM-LV")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The VAUX3 rail from the PMIC powers a clock driver which clocks
the WL127x. This corrects a bug which did not correctly associate
the vin-supply with the proper power rail.
This also fixes a typo in the pinmuxing to properly configure the
interrupt pin.
Fixes: ab8dd3aed0 ("ARM: DTS: Add minimal Support for Logic PD
DM3730 SOM-LV")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
smp_processor_id() checks preemption if CONFIG_DEBUG_PREEMPT is enabled,
causing a warning dump during boot:
[ 5.042377] BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
[ 5.050281] caller is pwrdm_set_next_pwrst+0x48/0x88
[ 5.055330] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.14.24-g57341df0b4 #1
Use the raw_smp_processor_id() for the trace instead, this value does
not need to be perfectly correct. The alternative of disabling preempt
is too heavy weight operation to be applied in PM hot path for just
tracing purposes.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Since commit 09f3756bb9 ("dm9000: Return an ERR_PTR() in all
error conditions of dm9000_parse_dt()"), passing either non-NULL
platform data or device-tree for dm9000 driver to probe is
mandatory.
DM335 board was using none, so networking failed to initialize.
Fix it by passing non-NULL (but empty) platform data.
Fixes: 09f3756bb9 ("dm9000: Return an ERR_PTR() in all error conditions of dm9000_parse_dt()")
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
commit c4dc56be7e ("ARM: davinci: fix the GPIO lookup for omapl138-hawk")
fixed the GPIO chip name for look-up of MMC/SD CD and WP pins, but forgot
to change the GPIO numbers passed.
The GPIO numbers are not offsets from within a 32 GPIO bank. Fix the
GPIO numbers as well as remove the misleading comment.
Fixes: c4dc56be7e ("ARM: davinci: fix the GPIO lookup for omapl138-hawk")
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The GPIO chip is called davinci_gpio.0 in legacy mode. Fix it, so that
mmc can correctly lookup the wp and cp gpios. Also fix the GPIO numbers
as they are not offsets within a bank.
Note that it is the gpio-davinci driver that sets the gpiochip label to
davinci_gpio.0.
Fixes: bdf0e8364f ("ARM: davinci: da850-evm: use gpio descriptor for mmc pins")
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The GPIO chip is called davinci_gpio.0 in legacy mode. Fix it, so that
mmc can correctly lookup the wp and cp gpios. Also fix the GPIO numbers
as they are not offsets within a bank.
Note that it is the gpio-davinci driver that sets the gpiochip label to
davinci_gpio.0.
Fixes: b5e1438cf9 ("ARM: davinci: da830-evm: use gpio descriptor for mmc pins")
Reported-by: David Lechner <david@lechnology.com>
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
ARM:
- PSCI selection API, a leftover from 4.16 (for stable)
- Kick vcpu on active interrupt affinity change
- Plug a VMID allocation race on oversubscribed systems
- Silence debug messages
- Update Christoffer's email address (linaro -> arm)
x86:
- Expose userspace-relevant bits of a newly added feature
- Fix TLB flushing on VMX with VPID, but without EPT
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJa44lQAAoJEED/6hsPKofo1dIH/3n9AZSWvavgL2V3j6agT8Yy
hxF4nHCFEJd5aqDNwbG9QEzivKw88r3o3mdB2XAQESB2MlCYR1jkTONm7yvVJTs/
/P9gj+DEQbCj2AgT//u3BGsAsZDKFhB9JwfmV2Mp4zDIqWFa6oCOGeq/iPVAGDcN
vUpuYeIicuH9SRoxH7de3z+BEXW0O+gCABXQtvA93FKTMz35yFTgmbDVCnvaV0zL
3B+3/4/jdbTRICW8EX6Li43+gEBUMtnVNkdqxLPTuCtDG8iuPUGfgF02gH99/9gj
hliV3Q4VUZKkSABW5AqKPe4+9rbsHCh9eL0LpHFGI9y+6LeUIOXAX4CtohR8gWE=
=W9Vz
-----END PGP SIGNATURE-----
rMerge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"ARM:
- PSCI selection API, a leftover from 4.16 (for stable)
- Kick vcpu on active interrupt affinity change
- Plug a VMID allocation race on oversubscribed systems
- Silence debug messages
- Update Christoffer's email address (linaro -> arm)
x86:
- Expose userspace-relevant bits of a newly added feature
- Fix TLB flushing on VMX with VPID, but without EPT"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/headers/UAPI: Move DISABLE_EXITS KVM capability bits to the UAPI
kvm: apic: Flush TLB after APIC mode/address change if VPIDs are in use
arm/arm64: KVM: Add PSCI version selection API
KVM: arm/arm64: vgic: Kick new VCPU on interrupt migration
arm64: KVM: Demote SVE and LORegion warnings to debug only
MAINTAINERS: Update e-mail address for Christoffer Dall
KVM: arm/arm64: Close VMID generation race
This updates the Gemini defconfig with a config that will bring
up most of the recently merged and updated devices to some
functional level:
- We enable high resolution timers (the right thing to do)
- Enable CMA for the framebuffer, and the new TVE200
framebuffer driver and the Ilitek ILI9322 driver for
graphics on the D-Link DIR-685. HIGHMEM support comes in
as part of this.
- Enable networking and the new Cortina Gemini ethernet
driver.
- Enable MDIO over GPIO and the Realtek PHY devices used on
several of these systems.
- Enable I2C over GPIO and SPI over GPIO which is used on
several of these devices.
- Enable the Thermal framework, GPIO fan control and LM75 sensor
adding cooling on the D-Link DNS-313 with no userspace
involved even if only the kernel is working, rock solid
thermal for this platform.
- Enable JEDEC flash probing to support the Eon flash chip in
D-Link DNS-313.
- Enable LED disk triggers for the NAS type devices.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
One of the bitbanged SPI hosts had wrongly named GPIO lines due to
sloppiness by yours truly.
Cc: arm@kernel.org
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Linus Torvalds