Commit Graph

9 Commits

Author SHA1 Message Date
Shannon Nelson fd263fb6e7 sunvnet: add memory barrier before check for tx enable
In order to allow the underlying LDC and outstanding memory operations
to potentially catch up with the driver's Tx requests, add a memory
barrier before checking again for available tx descriptors.

Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14 13:04:09 -05:00
Sowmini Varadhan d4aa89cc2b sunvnet: remove unused variable in maybe_tx_wakeup
The vio_dring_state *dr variable is unused in maybe_tx_wakeup().
As the comments indicate, we call maybe_tx_wakeup() whenever we
get a STOPPED LDC message on the port. If the queue is stopped,
we want to wake it up so that we will send another START message
at the next TX and trigger the consumer to drain the dring.

Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14 13:04:09 -05:00
Shannon Nelson 2493b842f2 sunvnet: make sunvnet common code dynamically loadable
When the sunvnet_common code was split out for use by both sunvnet
and the newer ldmvsw, it was made into a static kernel library, which
limits the usefulness of sunvnet and ldmvsw as loadables, since most
of the real work is being done in the shared code.  Also, this is
simply dead code in kernels that aren't running the LDoms.

This patch makes the sunvnet_common into a dynamically loadable
module and makes sunvnet and ldmvsw dependent on sunvnet_common.

Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14 13:04:08 -05:00
Eric Dumazet 6ad20165d3 drivers: net: generalize napi_complete_done()
napi_complete_done() allows to opt-in for gro_flush_timeout,
added back in linux-3.19, commit 3b47d30396
("net: gro: add a per device gro flush timer")

This allows for more efficient GRO aggregation without
sacrifying latencies.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 15:10:42 -05:00
Aaron Young 8778b27664 ldmvsw: tx queue stuck in stopped state after LDC reset
The following patch fixes an issue with the ldmvsw driver where
the network connection of a guest domain becomes non-functional after
the guest domain has panic'd and rebooted.

The root cause was determined to be from the following series of
events:

1. Guest domain panics - resulting in the guest no longer processing
   network packets (from ldmvsw driver)
2. The ldmvsw driver (in the control domain) eventually exerts flow
   control due to no more available tx drings and stops the tx queue
   for the guest domain
3. The LDC of the network connection for the guest is reset when
   the guest domain reboots after the panic.
4. The LDC reset event is received by the ldmvsw driver and the ldmvsw
   responds by clearing the tx queue for the guest.
5. ldmvsw waits indefinitely for a DATA ACK from the guest - which is
   the normal method to re-enable the tx queue. But the ACK never comes
   because the tx queue was cleared due to the LDC reset.

To fix this issue, in addition to clearing the tx queue, re-enable the
tx queue on a LDC reset. This prevents the ldmvsw from getting caught in
this deadlocked state of waiting for a DATA ACK which will never come.

Signed-off-by: Aaron Young <Aaron.Young@oracle.com>
Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31 15:20:29 -04:00
Jarod Wilson 540bfe30dc ethernet/sun: use core min/max MTU checking
cassini: min_mtu 60, max_mtu 9000

niu: min_mtu 68, max_mtu 9216

sungem: min_mtu 68, max_mtu 1500 (comments say jumbo mode is broken)

sunvnet: min_mtu 68, max_mtu 65535
- removed sunvnet_change_mut_common as it does nothing now

CC: netdev@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18 11:34:20 -04:00
Aaron Young dc153f850d ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c
Checkpatch updates for sunvnet.c and sunvnet_common.c.

  Signed-off-by: Aaron Young <aaron.young@oracle.com>
  Signed-off-by: Rashmi Narasimhan <rashmi.narasimhan@oracle.com>
  Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
  Reviewed-by: Alexandre Chartre <Alexandre.Chartre@oracle.com>

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-18 19:33:01 -04:00
Aaron Young 67d0719f06 ldmvsw: Make sunvnet_common compatible with ldmvsw
Modify sunvnet common code and data structures to be compatible
  with both sunvnet and ldmvsw drivers.

  Details:

  Sunvnet operates on "vnet-port" nodes which appear in the Machine
  Description (MD) in a guest domain. Ldmvsw operates on "vsw-port"
  nodes which appear in the MD of a service domain.

  A difference between the sunvnet driver and the ldmvsw driver is
  the sunvnet driver creates a network interface (i.e. a struct net_device)
  for every vnet-port *parent* "network" node. Several vnet-ports may appear
  under this common parent network node - each corresponding to a common parent
  network interface.  Conversely, since bridge/vswitch software will need
  to interface with every vsw-port in a system, the ldmvsw driver creates
  a network interface (i.e. a struct net_device) for every vsw-port - not
  every parent node as with sunvnet.  This difference required some special
  handling in the common code as explained below.

  There are 2 key data structures used by the sunvnet and ldmvsw drivers
  (which are now found in sunvnet_common.h):

  1. struct vnet_port
     This structure represents a vnet-port node in sunvnet and a vsw-port
     in the ldmvsw driver.

  2. struct vnet
     This structure represents a parent "network" node in sunvnet and a parent
     "virtual-network-switch" node in ldmvsw.

  Since the sunvnet driver allocates a net_device for every parent "network"
  node, a net_device member appears in the struct vnet. Since the ldmvsw
  driver allocates a net_device for every port, a net_device member was
  added to the vnet_port. The common code distinguishes which structure
  net_device member to use by checking a 'vsw' bit that was added to the
  vnet_port structure. See the VNET_PORT_TO_NET_DEVICE() marco in
  sunvnet_common.h.

  The netdev_priv() in sunvnet is allocated as a vnet. The netdev_priv()
  in ldmvsw is a vnet_port. Therefore, any place in the common code
  where a netdev_priv() call was made, a wrapper function was implemented
  in each driver to first get the vnet and/or vnet_port (in a driver
  specific way) and pass them as newly added parameters to the common
  functions (see wrapper funcs: vnet_set_rx_mode() and vnet_poll_controller()).
  Since these wrapper functions call __tx_port_find(), __tx_port_find() was
  moved from the common code back into sunvnet.c. Note - ldmvsw.c does not
  require this function.

  These changes also required that port_is_up() be made
  into a common function and thus it was given a _common suffix and
  exported like the other common functions.

  A wrapper function was also added for vnet_start_xmit_common() to pass a
  driver-specific function arg to return the port associated with a given
  struct sk_buff and struct net_device. This was required because
  vnet_start_xmit_common() grabs a lock prior to getting the associated
  port. Using a function pointer arg allowed the code to work unchanged
  without risking changes to the non-trivial locking logic in
  vnet_start_xmit_common().

  Signed-off-by: Aaron Young <aaron.young@oracle.com>
  Signed-off-by: Rashmi Narasimhan <rashmi.narasimhan@oracle.com>
  Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
  Reviewed-by: Alexandre Chartre <Alexandre.Chartre@oracle.com>

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-18 19:33:00 -04:00
Aaron Young 31762eaa0d ldmvsw: Split sunvnet driver into common code
Split sunvnet.c into sunvnet.c and sunvnet_common.c.

  Details:

  Since the sunvnet and ldmvsw drivers will both use common sunvnet code,
  move the functions (and support functions) anticipated to be common code
  from sunvnet.c to sunvnet_common.c. Similarly, sunvnet.h was renamed to
  sunvnet_common.h. The sunvnet_common.c code will be compiled into the
  kernel and act as a library of functions that are linked by either
  (or both) drivers when loaded.

  Function names for external functions in sunvnet_common.c (to be
  called by both the sunvnet and ldmvsw drivers) were tagged with a "_common"
  suffix to clearly designate them as common functions.

  No functional changes as of yet... just moved code verbatim to the new
  sunvnet_common.c/h files.

  Makefile/Kconfig support added to build sunvnet_common.c file. The code
  is included in the kernel if SUN_LDOMS is defined/selected.

  NOTE - per the SubmittingPatches documentation, since the code was just
  moved from one file another, the code was NOT checkpatch'd in this commit
  to aid in review.

  Signed-off-by: Aaron Young <aaron.young@oracle.com>
  Signed-off-by: Rashmi Narasimhan <rashmi.narasimhan@oracle.com>
  Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
  Reviewed-by: Alexandre Chartre <Alexandre.Chartre@oracle.com>

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-18 19:33:00 -04:00