DFLTCC deflate with Z_NO_FLUSH might generate a corrupted stream when the
output buffer is not large enough to fit all the deflate output at once.
The problem takes place on closing the deflate block since flush_pending()
might leave some output bits not written. Similar problem for software
deflate with Z_BLOCK flush option (not supported by kernel zlib deflate)
has been fixed a while ago in userspace zlib but the fix never got to the
kernel.
Now flush_pending() flushes the bit buffer before copying out the byte
buffer, in order to really flush as much as possible.
Currently there are no users of DFLTCC deflate with Z_NO_FLUSH option in
the kernel so the problem remained hidden for a while.
This commit is based on the old zlib commit:
https://github.com/madler/zlib/commit/0b828b4
Link: https://lkml.kernel.org/r/20230221131617.3369978-2-zaslonko@linux.ibm.com
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_get_folio() would always increase folio _refcount and
folio_isolate_lru() would increase folio _refcount if the folio's lru flag
is set.
If an unevictable folio isolated successfully, there will be two more
_refcount. The one from folio_isolate_lru() will be decreased in
folio_puback_lru(), but the other one from damon_get_folio() will be left
behind. This causes a pin page.
Whatever the case, the _refcount from damon_get_folio() should be
decreased.
Link: https://lkml.kernel.org/r/20230222064223.6735-1-andrew.yang@mediatek.com
Fixes: 57223ac295 ("mm/damon/paddr: support the pageout scheme")
Signed-off-by: andrew.yang <andrew.yang@mediatek.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.16.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In case 4, we are shrinking 'prev' (PPPP in the comment) and expanding
'mid' (NNNN). So we need to make sure 'mid' clones the anon_vma from
'prev', if it doesn't have any. After commit 0503ea8f5b ("mm/mmap:
remove __vma_adjust()") we can fail to do that due to wrong parameters for
dup_anon_vma(). The call is a no-op because res == next, adjust == mid
and mid == next. Fix it.
Link: https://lkml.kernel.org/r/ad91d62b-37eb-4b73-707a-3c45c9e16256@suse.cz
Fixes: 0503ea8f5b ("mm/mmap: remove __vma_adjust()")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
access(2) remains commonly used, for example on exec:
access("/etc/ld.so.preload", R_OK)
or when running gcc: strace -c gcc empty.c
% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ----------------
0.00 0.000000 0 42 26 access
It falls down to do_faccessat without the AT_EACCESS flag, which in turn
results in allocation of new creds in order to modify fsuid/fsgid and
caps. This is a very expensive process single-threaded and most notably
multi-threaded, with numerous structures getting refed and unrefed on
imminent new cred destruction.
Turns out for typical consumers the resulting creds would be identical
and this can be checked upfront, avoiding the hard work.
An access benchmark plugged into will-it-scale running on Cascade Lake
shows:
test proc before after
access1 1 1310582 2908735 (+121%) # distinct files
access1 24 4716491 63822173 (+1353%) # distinct files
access2 24 2378041 5370335 (+125%) # same file
The above benchmarks are not integrated into will-it-scale, but can be
found in a pull request:
https://github.com/antonblanchard/will-it-scale/pull/36/files
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In this round, we've got a huge number of patches that improve code readability
along with minor bug fixes, while we've mainly fixed some critical issues in
recently-added per-block age-based extent_cache, atomic write support, and some
folio cases.
Enhancement:
- add sysfs nodes to set last_age_weight and manage discard_io_aware_gran
- show ipu policy in debugfs
- reduce stack memory cost by using bitfield in struct f2fs_io_info
- introduce trace_f2fs_replace_atomic_write_block
- enhance iostat support and adds flush commands
Bug fix:
- revert "f2fs: truncate blocks in batch in __complete_revoke_list()"
- fix kernel crash on the atomic write abort flow
- call clear_page_private_reference in .{release,invalid}_folio
- support .migrate_folio for compressed inode
- fix cgroup writeback accounting with fs-layer encryption
- retry to update the inode page given data corruption
- fix kernel crash due to null io->bio
- fix some bugs in per-block age-based extent_cache:
a. wrong calculation of block age
b. update age extent in f2fs_do_zero_range()
c. update age extent correctly during truncation
-----BEGIN PGP SIGNATURE-----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=yXLl
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've got a huge number of patches that improve code
readability along with minor bug fixes, while we've mainly fixed some
critical issues in recently-added per-block age-based extent_cache,
atomic write support, and some folio cases.
Enhancements:
- add sysfs nodes to set last_age_weight and manage
discard_io_aware_gran
- show ipu policy in debugfs
- reduce stack memory cost by using bitfield in struct f2fs_io_info
- introduce trace_f2fs_replace_atomic_write_block
- enhance iostat support and adds flush commands
Bug fixes:
- revert "f2fs: truncate blocks in batch in __complete_revoke_list()"
- fix kernel crash on the atomic write abort flow
- call clear_page_private_reference in .{release,invalid}_folio
- support .migrate_folio for compressed inode
- fix cgroup writeback accounting with fs-layer encryption
- retry to update the inode page given data corruption
- fix kernel crash due to NULL io->bio
- fix some bugs in per-block age-based extent_cache:
- wrong calculation of block age
- update age extent in f2fs_do_zero_range()
- update age extent correctly during truncation"
* tag 'f2fs-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (81 commits)
f2fs: drop unnecessary arg for f2fs_ioc_*()
f2fs: Revert "f2fs: truncate blocks in batch in __complete_revoke_list()"
f2fs: synchronize atomic write aborts
f2fs: fix wrong segment count
f2fs: replace si->sbi w/ sbi in stat_show()
f2fs: export ipu policy in debugfs
f2fs: make kobj_type structures constant
f2fs: fix to do sanity check on extent cache correctly
f2fs: add missing description for ipu_policy node
f2fs: fix to set ipu policy
f2fs: fix typos in comments
f2fs: fix kernel crash due to null io->bio
f2fs: use iostat_lat_type directly as a parameter in the iostat_update_and_unbind_ctx()
f2fs: add sysfs nodes to set last_age_weight
f2fs: fix f2fs_show_options to show nogc_merge mount option
f2fs: fix cgroup writeback accounting with fs-layer encryption
f2fs: fix wrong calculation of block age
f2fs: fix to update age extent in f2fs_do_zero_range()
f2fs: fix to update age extent correctly during truncation
f2fs: fix to avoid potential memory corruption in __update_iostat_latency()
...
Restore the vcs_size() handling in vcs_read() to what
it had been in previous version.
Fixes: 226fae124b ("vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF")
Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KUnit's 'hooks.o' file need to be built-in whenever KUnit is enabled
(even if CONFIG_KUNIT=m). We'd previously attemtped to do this by
adding 'kunit/hooks.o' to obj-y in lib/Makefile, but this caused hooks.c
to be rebuilt even when it was unchanged.
Instead, always recurse into lib/kunit using obj-y when KUnit is
enabled, and add the hooks there.
Fixes: 7170b7ed6a ("kunit: Add "hooks" to call into KUnit when it's built as a module").
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/linux-kselftest/CAHk-=wiEf7irTKwPJ0jTMOF3CS-13UXmF6Fns3wuWpOZ_wGyZQ@mail.gmail.com/
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, out of every Ralink SoC, only the dt-binding of the MT7621 SoC
uses pinctrl. Because of this, PINCTRL is not selected at all. Make
SOC_MT7621 select PINCTRL.
Remove PINCTRL_MT7621, enabling it for the MT7621 SoC will be handled under
the PINCTRL_MT7621 option.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In c0_compare_int_usable we clear compare interrupt by write value
just read out from counter to compare register.
However sometimes if those all instructions are graduated together
then it's possible that at the time compare register is written, the
counter haven't progressed, thus the interrupt is triggered again.
It also applies to QEMU that instructions is executed significantly
faster then counter.
Offset the value used to clear interrupt by one to prevent that happen.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
CP0_CMGCRBASE is not always available on CPS enabled system
such as early proAptiv.
For early SMP bring up where we can't safely access memeory,
we patch the entry of CPS NMI vector to inject CMGCR address
directly into register during early core bringup.
For VPE bringup as the core is already coherenct at that point
we just read the variable to obtain the address.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Current release - regressions:
- phy: multiple fixes for EEE rework
- wifi: wext: warn about usage only once
- wifi: ath11k: allow system suspend to survive ath11k
Current release - new code bugs:
- mlx5: Fix memory leak in IPsec RoCE creation
- ibmvnic: assign XPS map to correct queue index
Previous releases - regressions:
- netfilter: ip6t_rpfilter: Fix regression with VRF interfaces
- netfilter: ctnetlink: make event listener tracking global
- nf_tables: allow to fetch set elements when table has an owner
- mlx5:
- fix skb leak while fifo resync and push
- fix possible ptp queue fifo use-after-free
Previous releases - always broken:
- sched: fix action bind logic
- ptp: vclock: use mutex to fix "sleep on atomic" bug if driver
also uses a mutex
- netfilter: conntrack: fix rmmod double-free race
- netfilter: xt_length: use skb len to match in length_mt6,
avoid issues with BIG TCP
Misc:
- ice: remove unnecessary CONFIG_ICE_GNSS
- mlx5e: remove hairpin write debugfs files
- sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Ko4p
-----END PGP SIGNATURE-----
Merge tag 'net-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and netfilter.
The notable fixes here are the EEE fix which restores boot for many
embedded platforms (real and QEMU); WiFi warning suppression and the
ICE Kconfig cleanup.
Current release - regressions:
- phy: multiple fixes for EEE rework
- wifi: wext: warn about usage only once
- wifi: ath11k: allow system suspend to survive ath11k
Current release - new code bugs:
- mlx5: Fix memory leak in IPsec RoCE creation
- ibmvnic: assign XPS map to correct queue index
Previous releases - regressions:
- netfilter: ip6t_rpfilter: Fix regression with VRF interfaces
- netfilter: ctnetlink: make event listener tracking global
- nf_tables: allow to fetch set elements when table has an owner
- mlx5:
- fix skb leak while fifo resync and push
- fix possible ptp queue fifo use-after-free
Previous releases - always broken:
- sched: fix action bind logic
- ptp: vclock: use mutex to fix "sleep on atomic" bug if driver also
uses a mutex
- netfilter: conntrack: fix rmmod double-free race
- netfilter: xt_length: use skb len to match in length_mt6, avoid
issues with BIG TCP
Misc:
- ice: remove unnecessary CONFIG_ICE_GNSS
- mlx5e: remove hairpin write debugfs files
- sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy"
* tag 'net-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
tcp: tcp_check_req() can be called from process context
net: phy: c45: fix network interface initialization failures on xtensa, arm:cubieboard
xen-netback: remove unused variables pending_idx and index
net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy
net: dsa: ocelot_ext: remove unnecessary phylink.h include
net: mscc: ocelot: fix duplicate driver name error
net: dsa: felix: fix internal MDIO controller resource length
net: dsa: seville: ignore mscc-miim read errors from Lynx PCS
net/sched: act_sample: fix action bind logic
net/sched: act_mpls: fix action bind logic
net/sched: act_pedit: fix action bind logic
wifi: wext: warn about usage only once
wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue
qede: avoid uninitialized entries in coal_entry array
nfc: fix memory leak of se_io context in nfc_genl_se_io
ice: remove unnecessary CONFIG_ICE_GNSS
net/sched: cls_api: Move call to tcf_exts_miss_cookie_base_destroy()
ibmvnic: Assign XPS map to correct queue index
docs: net: fix inaccuracies in msg_zerocopy.rst
tools: net: add __pycache__ to gitignore
...
Unable to handle kernel paging request at virtual address 73657420 when execute
[73657420] *pgd=00000000
Internal error: Oops: 80000005 [#1] ARM
CPU: 0 PID: 1 Comm: swapper Tainted: G N 6.2.0-rc7-00133-g373f26a81164-dirty #9
Hardware name: Generic DT based system
PC is at 0x73657420
LR is at kunit_run_tests+0x3e0/0x5f4
On x86 with GCC 12, the missing array terminators did not seem to
matter. Other platforms appear to be more picky.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Allow the new GSS Kerberos encryption type test suites to run
outside of the kunit infrastructure. Replace the assertion that
fires when lookup_enctype() so that the case is skipped instead of
failing outright.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This is a follow up of commit 0a375c8224 ("tcp: tcp_rtx_synack()
can be called from process context").
Frederick Lawler reported another "__this_cpu_add() in preemptible"
warning caused by the same reason.
In my former patch I took care of tcp_rtx_synack()
but forgot that tcp_check_req() also contained some SNMP updates.
Note that some parts of tcp_check_req() always run in BH context,
I added a comment to clarify this.
Fixes: 8336886f78 ("tcp: TCP Fast Open Server - support TFO listeners")
Link: https://lore.kernel.org/netdev/8cd33923-a21d-397c-e46b-2a068c287b03@cloudflare.com/T/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Frederick Lawler <fred@cloudflare.com>
Tested-by: Frederick Lawler <fred@cloudflare.com>
Link: https://lore.kernel.org/r/20230227083336.4153089-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
building with gcc and W=1 reports
drivers/net/xen-netback/netback.c:886:21: error: variable
‘pending_idx’ set but not used [-Werror=unused-but-set-variable]
886 | u16 pending_idx;
| ^~~~~~~~~~~
pending_idx is not used so remove it. Since index was only
used to set pending_idx, remove index as well.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230226163429.2351600-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
First set of fixes for v6.3. We have only three oneliners. The most
important one is the patch reducing warnings about the Wireless
Extensions usage, reported by Linus.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmP8q1YRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZv9nwf/aulYuDE4DdF6vFpOoSpvJR1z7BI/9HWE
VIFEPH+wspEfMNoFStaumD4X3ELAZczpW2dAIjsa2dVS76SpPtP/0IIkP2TnMBrM
9PDSOtTCr7NReGyrjwe7Pe6KAjOet6vjFEWEfCEv3QZV3cgMiwyOFkgF8GmBwM+M
aUoBrzHW574Mz4EE/FGagBftVqk2SUEHZu5cSooTkXO9B7d71Q3uuyrd9SVhSj44
L3Q1TYLodJQQyNHZNofrTDSaduS02MVR2gDQ6DzMtptWCHei9pC5uR6HaBj8Q94b
KngpzEqhptxSEvkZqAm5taCa540M2m/JXEVGFZat0bmuTXG/Cciv6w==
=ICOp
-----END PGP SIGNATURE-----
Merge tag 'wireless-2023-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.3
First set of fixes for v6.3. We have only three oneliners. The most
important one is the patch reducing warnings about the Wireless
Extensions usage, reported by Linus.
* tag 'wireless-2023-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: wext: warn about usage only once
wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue
wifi: ath11k: allow system suspend to survive ath11k
====================
Link: https://lore.kernel.org/r/20230227131053.BD779C433D2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few bugfixes already came up during the merge window. Samsung, ASpeed,
Spear have minor DT changes, in case of Samsung this fixes a regression
compared to earlier versions.
Bartosz takes over as the primary maintainer for the TI DaVinci platform,
and we get a few last minute defconfig changes.
-----BEGIN PGP SIGNATURE-----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=ECLF
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A few bugfixes already came up during the merge window. Samsung,
ASpeed, Spear have minor DT changes, in case of Samsung this fixes a
regression compared to earlier versions.
Bartosz takes over as the primary maintainer for the TI DaVinci
platform, and we get a few last minute defconfig changes"
* tag 'arm-fixes-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: spear320-hmi: correct STMPE GPIO compatible
ARM: dts: aspeed: p10bmc: Update battery node name
arm64: defconfig: Add IOSCHED_BFQ to the default configs
arm64: defconfig: Fix unintentional disablement of PCI on i.MX
ARM: dts: exynos: correct TMU phandle in Odroid XU3 family
ARM: dts: exynos: correct TMU phandle in Odroid HC1
ARM: dts: exynos: correct TMU phandle in Odroid XU
ARM: dts: exynos: correct TMU phandle in Exynos5250
ARM: dts: exynos: correct TMU phandle in Exynos4210
ARM: dts: exynos: correct TMU phandle in Exynos4
MAINTAINERS: make me the maintainer of DaVinci platforms
As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv
-----BEGIN PGP SIGNATURE-----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=p6Xp
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
Explain why STIBP is needed with legacy IBRS as currently implemented
(KERNEL_IBRS) and why STIBP is not needed when enhanced IBRS is enabled.
Fixes: 7c693f54c8 ("x86/speculation: Add spectre_v2=ibrs option to support Kernel IBRS")
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230227060541.1939092-2-kpsingh@kernel.org
When plain IBRS is enabled (not enhanced IBRS), the logic in
spectre_v2_user_select_mitigation() determines that STIBP is not needed.
The IBRS bit implicitly protects against cross-thread branch target
injection. However, with legacy IBRS, the IBRS bit is cleared on
returning to userspace for performance reasons which leaves userspace
threads vulnerable to cross-thread branch target injection against which
STIBP protects.
Exclude IBRS from the spectre_v2_in_ibrs_mode() check to allow for
enabling STIBP (through seccomp/prctl() by default or always-on, if
selected by spectre_v2_user kernel cmdline parameter).
[ bp: Massage. ]
Fixes: 7c693f54c8 ("x86/speculation: Add spectre_v2=ibrs option to support Kernel IBRS")
Reported-by: José Oliveira <joseloliveira11@gmail.com>
Reported-by: Rodrigo Branco <rodrigo@kernelhacking.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230220120127.1975241-1-kpsingh@kernel.org
Link: https://lore.kernel.org/r/20230221184908.2349578-1-kpsingh@kernel.org
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCY/ysqAAKCRDh3BK/laaZ
PLSfAP9c4z/KOZj/Am8nQ0mqI8Ss0Ei+hyu8Vow6NoyJkR4NvwD/SxEeI2+rpXj7
TGOA+6k4chLc7QIFBsIwGvQgeXld1gA=
=s4b/
-----END PGP SIGNATURE-----
Merge tag 'fuse-update-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Fix regression in fileattr permission checking
- Fix possible hang during PID namespace destruction
- Add generic support for request extensions
- Add supplementary group list extension
- Add limited support for supplying supplementary groups in create
requests
- Documentation fixes
* tag 'fuse-update-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: add inode/permission checks to fileattr_get/fileattr_set
fuse: fix all W=1 kernel-doc warnings
fuse: in fuse_flush only wait if someone wants the return code
fuse: optional supplementary group in create requests
fuse: add request extension
- Extend slot-gpio to be used for host specific card detect interrupts
- Align to common busy polling behaviour for mmc ioctls
- Suggest the BFQ I/O scheduler to be built along with MMC/SD support
- Add devm_mmc_alloc_host() to enable further cleanups in host drivers
MMC host:
- atmel-mci: Fix race condition when stopping/starting a command
- dw_mmc-starfive: Add new driver to support the StarFive JH7110 variant
- dw_mmc-rockchip: Add support for the RK3588 variant
- jz4740: Add support for the vqmmc power supply
- meson-gx: Convert the DT bindings to the dt-schema
- meson-gx: Enable the platform interrupt to be used for card detect
- moxart: Set the supported maximum request/block/segment sizes
- renesas,sdhi: Add support for the RZ/V2M variants
- sdhci: Rework code to drop SDHCI_QUIRK_MISSING_CAPS
- sdhci-esdhc-imx: Improve tuning logic support
- sdhci-msm: Add support for the IPQ5332 and the IPQ9574 variants
- sdhci-of-dwcmshc: Add the missing device table IDs for acpi
- sdhci-of-dwcmshc: Improve clock support for the Rockchip variant
- sdhci-of-dwcmshc: Enable support of V4 host for the BlueField-3 variant
- sdhci-pxav2: Add support for the PXA168 V1 variant
- sdhci-pxav2: Add support for SDIO IRQs for the PXA168 V1 variant
- uniphier-sd: Add support for SD UHS-I speed modes
-----BEGIN PGP SIGNATURE-----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=CF/8
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Extend slot-gpio to be used for host specific card detect interrupts
- Align to common busy polling behaviour for mmc ioctls
- Suggest the BFQ I/O scheduler to be built along with MMC/SD support
- Add devm_mmc_alloc_host() to enable further cleanups in host drivers
MMC host:
- atmel-mci: Fix race condition when stopping/starting a command
- dw_mmc-starfive: Add new driver to support the StarFive JH7110 variant
- dw_mmc-rockchip: Add support for the RK3588 variant
- jz4740: Add support for the vqmmc power supply
- meson-gx: Convert the DT bindings to the dt-schema
- meson-gx: Enable the platform interrupt to be used for card detect
- moxart: Set the supported maximum request/block/segment sizes
- renesas,sdhi: Add support for the RZ/V2M variants
- sdhci: Rework code to drop SDHCI_QUIRK_MISSING_CAPS
- sdhci-esdhc-imx: Improve tuning logic support
- sdhci-msm: Add support for the IPQ5332 and the IPQ9574 variants
- sdhci-of-dwcmshc: Add the missing device table IDs for acpi
- sdhci-of-dwcmshc: Improve clock support for the Rockchip variant
- sdhci-of-dwcmshc: Enable support of V4 host for the BlueField-3 variant
- sdhci-pxav2: Add support for the PXA168 V1 variant
- sdhci-pxav2: Add support for SDIO IRQs for the PXA168 V1 variant
- uniphier-sd: Add support for SD UHS-I speed modes"
* tag 'mmc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits)
mmc: meson-gx: Use devm_platform_get_and_ioremap_resource()
mmc: meson-gx: constify member data of struct meson_host
mmc: meson-gx: use devm_clk_get_enabled() for core clock
mmc: core: fix return value check in devm_mmc_alloc_host()
dt-bindings: mmc: meson-gx: fix interrupt binding
mmc: meson-gx: support platform interrupt as card detect interrupt
dt-bindings: mmc: meson-gx: support specifying cd interrupt
mmc: core: support setting card detect interrupt from drivers
mmc: starfive: Add sdio/emmc driver support
dt-bindings: mmc: Add StarFive MMC module
dt-bindings: mmc: sdhci-msm: Allow 1 icc path
dt-bindings: mmc: rockchip-dw-mshc: Add RK3588 compatible string
mmc: core: Align to common busy polling behaviour for mmc ioctls
dt-bindings: mmc: Add resets property to cadence SDHCI binding
mmc: meson-gx: remove meson_mmc_get_cd
mmc: moxart: set maximum request/block/segment sizes
mmc: sdhci-brcmstb: Use devm_platform_get_and_ioremap_resource()
mmc: sdhci-of-dwcmshc: add the missing device table IDs for acpi
mmc: sdhci-of-dwcmshc: Update DLL and pre-change delay for rockchip platform
mmc: jz4740: Add support for vqmmc power supply
...
- remove a not very useful and now unused swiotlb API
(Christoph Hellwig)
- fix a section mismatch (Randy Dunlap)
-----BEGIN PGP SIGNATURE-----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=LRx6
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.3-2022-02-27' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- remove a not very useful and now unused swiotlb API (Christoph
Hellwig)
- fix a section mismatch (Randy Dunlap)
* tag 'dma-mapping-6.3-2022-02-27' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: mark swiotlb_memblock_alloc() as __init
swiotlb: remove swiotlb_max_segment
* fix off-by-one in the check whether memblock_add_range() should
reallocate memory to accommodate newly inserted range
* check only for relevant regions in memblock_merge_regions() rather than
swipe over the entire array
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmP8cSMQHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kZvWCACv2Zq98ngzyporEXiB7nxvzy2nujdPwJDO
AivRFIqpq6yD+RRYPu6C2ynvJ1o4+k5E3GTyNrecqhqY64y9zWkg0T+G3LBiVZRR
IT2qIPMqqNsV6DCTSo2og7oTSw/rD3b1jKZvWXY0ulUzvXvNCsddrYD0uQQZ4cIp
Mt4zt5SDpeJMDuuKrT31xeeMNAnUOfkxzresUq1iWNcqIS/bKQgPl+pwLAmgX4Th
gVSxPChMO+ZNSUPp0znSt6jySCQKQygW5xfgRpaJJcYiiNlGWZvZRePMVYXmcwlt
LrBuKZs8kpcJpSierBKwS7zz1Ctwa0lDEw8JZAoajFd8hmsVx1YV
=Ky/Y
-----END PGP SIGNATURE-----
Merge tag 'memblock-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
"Small optimizations:
- fix off-by-one in the check whether memblock_add_range() should
reallocate memory to accommodate newly inserted range
- check only for relevant regions in memblock_merge_regions() rather
than swipe over the entire array"
* tag 'memblock-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: Avoid useless checks in memblock_merge_regions().
memblock: Make a boundary tighter in memblock_add_range().
Prior to the removal of xfs_ialloc_next_ag, we would increment the agi
rotor and return the *old* value. atomic_inc_return returns the new
value, which causes mkfs to allocate the root directory in AG 1. Put
back the old behavior (at least for mkfs) by subtracting 1 here.
Fixes: 20a5eab49d ("xfs: convert xfs_ialloc_next_ag() to an atomic")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Introduce a new ap queue status register wrapper union to access register
wide values. So the inline assembler only sees register wide values but the
surrounding code may use a more structured view of the same value and a
reader of the code (and the compiler) gets a clear understanding about the
mapping between fields and register values.
All the changes to access the ap queue status are local to the inline
functions within ap.h. However, the struct ap_qirq_ctrl has been replaces
by a union for same reason and this needed slight adaptions in the calling
code.
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Suggested-by: Andreas Arnez <arnez@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When a machine check is received while in SIE, it is reinjected into the
guest in some cases. The respective code needs to access the sie_block,
which is taken from the backed up R14.
Since reinjection only occurs while we are in SIE (i.e. between the
labels sie_entry and sie_leave in entry.S and thus if CIF_MCCK_GUEST is
set), the backed up R14 will always contain a physical address in
s390_backup_mcck_info.
This currently works, because virtual and physical addresses are
the same.
Add phys_to_virt() to resolve the virtual-physical confusion.
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20230216121208.4390-2-nrb@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Currently there are several kernel command line parameters which are
only parsed and handled in decompressor and not known to the kernel.
This leads to the following error message during kernel boot:
Unknown kernel command line parameters "mem=3G nokaslr", will be passed
to user space.
To avoid confusion, register those parameters with an empty stub so that
kernel does not complain about them.
Reported-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The log entries are stored in le32, so use appropriate byte swapping
macros.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202302242222.PevBhzvC-lkp@intel.com/
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Thermal framework commit 3fd6d6e2b4 ("thermal/of: Rework the thermal
device tree initialization") merged in v6.1-rc1, exposed
misconfiguration of Exynos Thermal Monitoring Unit (TMU) thermal-sensors
property in DTS. This misconfiguration in DTS was working fine before
that Thermal commit, but now all thermal zones fail to register except
the first one (CPU). This can lead to missing cooling of a board and
eventually either emergency shutdown or damaged board.
-----BEGIN PGP SIGNATURE-----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=n0X3
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=zXLW
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-fixes-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes
Fixes for Samsung DTS ARM for v6.3
Thermal framework commit 3fd6d6e2b4 ("thermal/of: Rework the thermal
device tree initialization") merged in v6.1-rc1, exposed
misconfiguration of Exynos Thermal Monitoring Unit (TMU) thermal-sensors
property in DTS. This misconfiguration in DTS was working fine before
that Thermal commit, but now all thermal zones fail to register except
the first one (CPU). This can lead to missing cooling of a board and
eventually either emergency shutdown or damaged board.
* tag 'samsung-dt-fixes-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: correct TMU phandle in Odroid XU3 family
ARM: dts: exynos: correct TMU phandle in Odroid HC1
ARM: dts: exynos: correct TMU phandle in Odroid XU
ARM: dts: exynos: correct TMU phandle in Exynos5250
ARM: dts: exynos: correct TMU phandle in Exynos4210
ARM: dts: exynos: correct TMU phandle in Exynos4
Link: https://lore.kernel.org/r/20230221095337.9453-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM64 systems are often memory constrained and more often than not
use slow single-channel storage such as flash memory or MMC/SD-cards.
For any interactive systems (such as mobile phones, tablets,
chromebooks...) the BFQ I/O scheduler will be desireable.
Make sure the BFQ I/O scheduler is available on these systems.
ARM (32), Loongarch, MIPS, m68k, UM and S390 has also enabled BFQ in
their defconfigs, cf commit b495dfed70
"um: Cleanup CONFIG_IOSCHED_CFQ" where the motivation is that
it replaces the former CFQ scheduler.
Cc: linux-arm-kernel@lists.infradead.org
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Paolo Valente <paolo.valente@linaro.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230224135230.2295826-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A recent update to support PCI endpoint mode on i.MX platforms
unintentionally disabled PCI host support for i.MX in defconfig. The
existing PCI_IMX6 was made a hidden option, selected by new options
PCI_IMX6_HOST (for the existing support) and PCI_IMX6_EP (for the
endpoint mode), but there has been no corresponding update to defconfig
so the PCI_IMX6 ends up getting disabled. Switch defconfig to
PCI_IMX6_HOST to preserve the existing functionality.
Fixes: 75c2f26da0 ("PCI: imx6: Add i.MX PCIe EP mode support")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://lore.kernel.org/r/20230220-imx-pci-defconfig-v1-1-2210cf08340e@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
TCA_EXT_WARN_MSG is currently sitting outside of the expected hierarchy
for the tc actions code. It should sit within TCA_ACT_TAB.
Fixes: 0349b8779c ("sched: add new attr TCA_EXT_WARN_MSG to report tc extact message")
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sony PXW-Z280 camera add vendor allocation entries to directory of
pictures. Currently, linux exfat does not support it and the file is
not visible. This patch handle vendor extension and allocation entries
as unreconized benign secondary entries. As described in the specification,
it is recognized but ignored, and when deleting directory entry set,
the associated clusters allocation are removed as well as benign secondary
directory entries.
Reported-by: Barócsi Dénes <admin@tveger.hu>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
inode->i_blocks is not real number of blocks, but 512 byte ones.
Fixes: 98d917047e ("exfat: add file operations")
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Tested-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
When a file or a directory is deleted, the hint for the cluster of
its parent directory in its in-memory inode is set as DIR_DELETED.
Therefore, DIR_DELETED must be one of invalid cluster numbers. According
to the exFAT specification, a volume can have at most 2^32-11 clusters.
However, DIR_DELETED is wrongly defined as 0xFFFF0321, which could be
a valid cluster number. To fix it, let's redefine DIR_DELETED as
0xFFFFFFF7, the bad cluster number.
Fixes: 1acf1a564b ("exfat: add in-memory and on-disk structures and headers")
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Since seekdir() does not check whether the position is valid, the
position may exceed the size of the directory. We found that for
a directory with discontinuous clusters, if the position exceeds
the size of the directory and the excess size is greater than or
equal to the cluster size, exfat_readdir() will return -EIO,
causing a file system error and making the file system unavailable.
Reproduce this bug by:
seekdir(dir, dir_size + cluster_size);
dirent = readdir(dir);
The following log will be printed if mount with 'errors=remount-ro'.
[11166.712896] exFAT-fs (sdb1): error, invalid access to FAT (entry 0xffffffff)
[11166.712905] exFAT-fs (sdb1): Filesystem has been set read-only
Fixes: 1e5654de0f ("exfat: handle wrong stream entry size in exfat_readdir()")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
If the position is not aligned with the dentry size, the return
value of readdir() will be NULL and errno is 0, which means the
end of the directory stream is reached.
If the position is aligned with dentry size, but there is no file
or directory at the position, exfat_readdir() will continue to
get dentry from the next dentry. So the dentry gotten by readdir()
may not be at the position.
After this commit, if the position is not aligned with the dentry
size, round the position up to the dentry size and continue to get
the dentry.
Fixes: ca06197382 ("exfat: add directory operations")
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
As now we are always managing DMA coherence on per dev bias,
there is no need to have such option. And it's not selected
by any platform.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
On SH, devm_clk_get_optional_enabled() fails with -EINVAL if the clock
is not found. This happens because __devm_clk_get() assumes it can pass
a NULL clock pointer (as returned by clk_get_optional()) to the init()
function (clk_prepare_enable() in this case), while the SH
implementation of clk_enable() considers that an error.
Fix this by making the SH clk_enable() implementation return zero
instead, like the Common Clock Framework does.
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/b53e6b557b4240579933b3359dda335ff94ed5af.1675354849.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
GCC warns about the pattern sizeof(void*)/sizeof(void), as it looks like
the abuse of a pattern to calculate the array size. This pattern appears
in the unevaluated part of the ternary operator in _INTC_ARRAY if the
parameter is NULL.
The replacement uses an alternate approach to return 0 in case of NULL
which does not generate the pattern sizeof(void*)/sizeof(void), but still
emits the warning if _INTC_ARRAY is called with a nonarray parameter.
This patch is required for successful compilation with -Werror enabled.
The idea to use _Generic for type distinction is taken from Comment #7
in https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108483 by Jakub Jelinek
Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/619fa552-c988-35e5-b1d7-fe256c46a272@mkarcher.dialup.fu-berlin.de
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Support for PRU clients to acquire a control reference to the PRU
instances is introduced, and the PRU now allows specifying firmware-name
in Devicetree. sysfs is requested to be read-only when the remoteproc
instance is consumed by another kernel driver.
Support for the C7xv DSP on AM62A SoC is introduced.
The Devicetree binding for the Qualcomm PAS devices are split up in
multiple files, to better account for the differences in resources
between them. A number of missing Devicetree bindings are added, and the
Qualcomm WCNSS binding is converted to YAML.
A few cleanups are introduced for the Mediatek SCP driver. And a sanity
check of the firmware image is introduced in the Mediatek driver.
For Qualcomm SC7280 ADSP support is added, MSM8953 gains ADSP and modem
support, SM6115 and SM8550 gains ADSP, CDSP and modem support, and
support for pronto v3 support (used on e.g. MSM8953) is added.
The Qualcomm modem remoteproc driver is modified to use a no-map
reserved-memory region for it's authentication metadata, in order to
avoid fatal security violations caused by accesses from Linux during
the authentication process.
Support for separate loading of a Devicetree blob is added to the PAS
driver, and support for the PAS driver to carve out DSM memory for the
modem is added as well.
The Qualcomm ADSP remoteproc driver gains support for mapping memory
into specific range using the IOMMU. The sysmon driver is transitioned
to strlcpy()
-----BEGIN PGP SIGNATURE-----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=clXY
-----END PGP SIGNATURE-----
Merge tag 'rproc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- Support for PRU clients to acquire a control reference to the PRU
instances is introduced, and the PRU now allows specifying
firmware-name in Devicetree. sysfs is requested to be read-only when
the remoteproc instance is consumed by another kernel driver
- Support for the C7xv DSP on AM62A SoC is introduced
- The Devicetree binding for the Qualcomm PAS devices are split up in
multiple files, to better account for the differences in resources
between them. A number of missing Devicetree bindings are added, and
the Qualcomm WCNSS binding is converted to YAML
- A few cleanups are introduced for the Mediatek SCP driver. And a
sanity check of the firmware image is introduced in the Mediatek
driver
- For Qualcomm SC7280 ADSP support is added, MSM8953 gains ADSP and
modem support, SM6115 and SM8550 gains ADSP, CDSP and modem support,
and support for pronto v3 support (used on e.g. MSM8953) is added
- The Qualcomm modem remoteproc driver is modified to use a no-map
reserved-memory region for it's authentication metadata, in order to
avoid fatal security violations caused by accesses from Linux during
the authentication process
- Support for separate loading of a Devicetree blob is added to the PAS
driver, and support for the PAS driver to carve out DSM memory for
the modem is added as well
- The Qualcomm ADSP remoteproc driver gains support for mapping memory
into specific range using the IOMMU. The sysmon driver is
transitioned to strlcpy()
* tag 'rproc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (69 commits)
dt-bindings: mailbox: qcom,apcs-kpss-global: drop mbox-names from example
dt-bindings: remoteproc: qcom,glink-edge: correct label description
dt-bindings: remoteproc: qcom,glink-rpm-edge: convert to DT schema
dt-bindings: remoteproc: qcom,sm8550-pas: correct power domains
remoteproc: qcom_q6v5_pas: enable sm8550 adsp & cdsp autoboot
dt-bindings: remoteproc: qcom: Add sm6115 pas yaml file
remoteproc: qcom: pas: Add sm6115 remoteprocs
remoteproc: qcom: pas: Adjust the phys addr wrt the mem region
remoteproc: qcom: fix sparse warnings
remoteproc: qcom: replace kstrdup with kstrndup
remoteproc: mediatek: Check the SCP image format
remoteproc: qcom_q6v5_mss: Use a carveout to authenticate modem headers
Revert "remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use"
dt-bindings: remoteproc: qcom,sc7280-mss-pil: Update memory-region
dt-bindings: remoteproc: qcom,sc7180-mss-pil: Update memory-region
dt-bindings: remoteproc: qcom,msm8996-mss-pil: Update memory region
dt-bindings: remoteproc: qcom,q6v5: Move MSM8996 to schema
remoteproc: qcom_q6v5_pas: add sm8550 adsp, cdsp & mpss compatible & data
remoteproc: qcom_q6v5_pas: add support for assigning memory to firmware
remoteproc: qcom_q6v5_pas: add support for dtb co-firmware loading
...
rpmsg ctrl and char driver locking is ensure ordering in cases where the
communication link is being torn down in parallel with calls to open(2)
or poll(2).
The glink driver is refactored, to move rpm/smem-specifics out of the
common logic and better suite further improvements, such as transports
without a mailbox controller. The handling of remoteproc shutdown is
improved, to fail clients immediately instead of having them to wait for
timeouts. A driver_override memory leak is corrected and a few spelling
improvements are introduced.
glink_ssr is transitioned off strlcpy() and "gpr" is added as a valid
child node of the glink-edge DT binding.
-----BEGIN PGP SIGNATURE-----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=0w8J
-----END PGP SIGNATURE-----
Merge tag 'rpmsg-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
- rpmsg ctrl and char driver locking is ensure ordering in cases where
the communication link is being torn down in parallel with calls to
open(2) or poll(2)
- The glink driver is refactored, to move rpm/smem-specifics out of the
common logic and better suite further improvements, such as
transports without a mailbox controller. The handling of remoteproc
shutdown is improved, to fail clients immediately instead of having
them to wait for timeouts. A driver_override memory leak is corrected
and a few spelling improvements are introduced
- glink_ssr is transitioned off strlcpy() and "gpr" is added as a valid
child node of the glink-edge DT binding
* tag 'rpmsg-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: glink: Release driver_override
rpmsg: glink: Avoid infinite loop on intent for missing channel
rpmsg: glink: Fix GLINK command prefix
rpmsg: glink: Fix spelling of peek
rpmsg: glink: Cancel pending intent requests at removal
rpmsg: glink: Fail qcom_glink_tx() once remove has been initiated
rpmsg: glink: Move irq and mbox handling to transports
rpmsg: glink: rpm: Wrap driver context
rpmsg: glink: smem: Wrap driver context
rpmsg: glink: Extract tx kick operation
rpmsg: glink: Include types in qcom_glink_native.h
rpmsg: ctrl: Add lock to rpmsg_ctrldev_remove
rpmsg: char: Add lock to avoid race when rpmsg device is released
rpmsg: move from strlcpy with unused retval to strscpy
dt-bindings: remoteproc: qcom,glink-edge: add GPR node
Mikhail Zaslonko