blk_get_backing_dev_info() is now a simple dereference. Remove that
function and simplify some code around that.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
If we try to allocate memory pages to back an xfs_buf that we're trying
to read, it's possible that we'll be so short on memory that the page
allocation fails. For a blocking read we'll just wait, but for
readahead we simply dump all the pages we've collected so far.
Unfortunately, after dumping the pages we neglect to clear the
_XBF_PAGES state, which means that the subsequent call to xfs_buf_free
thinks that b_pages still points to pages we own. It then double-frees
the b_pages pages.
This results in screaming about negative page refcounts from the memory
manager, which xfs oughtn't be triggering. To reproduce this case,
mount a filesystem where the size of the inodes far outweighs the
availalble memory (a ~500M inode filesystem on a VM with 300MB memory
did the trick here) and run bulkstat in parallel with other memory
eating processes to put a huge load on the system. The "check summary"
phase of xfs_scrub also works for this purpose.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Contained in this update:
- DAX PMD vaults via iomap infrastructure
- Direct-io support in iomap infrastructure
- removal of now-redundant XFS inode iolock, replaced with VFS i_rwsem
- synchronisation with fixes and changes in userspace libxfs code
- extent tree lookup helpers
- lots of little corruption detection improvements to verifiers
- optimised CRC calculations
- faster buffer cache lookups
- deprecation of barrier/nobarrier mount options - we always use
REQ_FUA/REQ_FLUSH where appropriate for data integrity now
- cleanups to speculative preallocation
- miscellaneous minor bug fixes and cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=HwDG
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs updates from Dave Chinner:
"There is quite a varied bunch of stuff in this update, and some of it
you will have already merged through the ext4 tree which imported the
dax-4.10-iomap-pmd topic branch from the XFS tree.
There is also a new direct IO implementation that uses the iomap
infrastructure. It's much simpler, faster, and has lower IO latency
than the existing direct IO infrastructure.
Summary:
- DAX PMD faults via iomap infrastructure
- Direct-io support in iomap infrastructure
- removal of now-redundant XFS inode iolock, replaced with VFS
i_rwsem
- synchronisation with fixes and changes in userspace libxfs code
- extent tree lookup helpers
- lots of little corruption detection improvements to verifiers
- optimised CRC calculations
- faster buffer cache lookups
- deprecation of barrier/nobarrier mount options - we always use
REQ_FUA/REQ_FLUSH where appropriate for data integrity now
- cleanups to speculative preallocation
- miscellaneous minor bug fixes and cleanups"
* tag 'xfs-for-linus-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (63 commits)
xfs: nuke unused tracepoint definitions
xfs: use GPF_NOFS when allocating btree cursors
xfs: use xfs_vn_setattr_size to check on new size
xfs: deprecate barrier/nobarrier mount option
xfs: Always flush caches when integrity is required
xfs: ignore leaf attr ichdr.count in verifier during log replay
xfs: use rhashtable to track buffer cache
xfs: optimise CRC updates
xfs: make xfs btree stats less huge
xfs: don't cap maximum dedupe request length
xfs: don't allow di_size with high bit set
xfs: error out if trying to add attrs and anextents > 0
xfs: don't crash if reading a directory results in an unexpected hole
xfs: complain if we don't get nextents bmap records
xfs: check for bogus values in btree block headers
xfs: forbid AG btrees with level == 0
xfs: several xattr functions can be void
xfs: handle cow fork in xfs_bmap_trace_exlist
xfs: pass state not whichfork to trace_xfs_extlist
xfs: Move AGI buffer type setting to xfs_read_agi
...
There is no reason anymore for not issuing device integrity
operations when teh filesystem requires ordering or data integrity
guarantees. We should always issue cache flushes and FUA writes
where necessary and let the underlying storage optimise them as
necessary for correct integrity operation.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
On filesystems with a lot of metadata and in metadata intensive workloads
xfs_buf_find() is showing up at the top of the CPU cycles trace. Most of
the CPU time is spent on CPU cache misses while traversing the rbtree.
As the buffer cache does not need any kind of ordering, but fast lookups
a hashtable is the natural data structure to use. The rhashtable
infrastructure provides a self-scaling hashtable implementation and
allows lookups to proceed while the table is going through a resize
operation.
This reduces the CPU-time spent for the lookups to 1/3 even for small
filesystems with a relatively small number of cached buffers, with
possibly much larger gains on higher loaded filesystems.
[dchinner: reduce minimum hash size to an acceptable size for large
filesystems with many AGs with no active use.]
[dchinner: remove stale rbtree asserts.]
[dchinner: use xfs_buf_map for compare function argument.]
[dchinner: make functions static.]
[dchinner: remove redundant comments.]
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Remove the WRITE_* and READ_SYNC wrappers, and just use the flags
directly. Where applicable this also drops usage of the
bio_set_op_attrs wrapper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
xfs_wait_buftarg() waits for all pending I/O, drains the ioend
completion workqueue and walks the LRU until all buffers in the cache
have been released. This is traditionally an unmount operation` but the
mechanism is also reused during filesystem freeze.
xfs_wait_buftarg() invokes drain_workqueue() as part of the quiesce,
which is intended more for a shutdown sequence in that it indicates to
the queue that new operations are not expected once the drain has begun.
New work jobs after this point result in a WARN_ON_ONCE() and are
otherwise dropped.
With filesystem freeze, however, read operations are allowed and can
proceed during or after the workqueue drain. If such a read occurs
during the drain sequence, the workqueue infrastructure complains about
the queued ioend completion work item and drops it on the floor. As a
result, the buffer remains on the LRU and the freeze never completes.
Despite the fact that the overall buffer cache cleanup is not necessary
during freeze, fix up this operation such that it is safe to invoke
during non-unmount quiesce operations. Replace the drain_workqueue()
call with flush_workqueue(), which runs a similar serialization on
pending workqueue jobs without causing new jobs to be dropped. This is
safe for unmount as unmount independently locks out new operations by
the time xfs_wait_buftarg() is invoked.
cc: <stable@vger.kernel.org>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The buffer I/O accounting mechanism tracks async buffers under I/O. As
an optimization, the buffer I/O count is incremented only once on the
first async I/O for a given hold cycle of a buffer and decremented once
the buffer is released to the LRU (or freed).
xfs_buf_ioacct_dec() has an ASSERT() check for an XBF_ASYNC buffer, but
we have one or two corner cases where a buffer can be submitted for I/O
multiple times via different methods in a single hold cycle. If an async
I/O occurs first, the I/O count is incremented. If a sync I/O occurs
before the hold count drops, XBF_ASYNC is cleared by the time the I/O
count is decremented.
Remove the async assert check from xfs_buf_ioacct_dec() as this is a
perfectly valid scenario. For the purposes of I/O accounting, we really
only care about the buffer async state at I/O submission time.
Discovered-and-analyzed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Changes in this update:
o generic iomap based IO path infrastructure
o generic iomap based fiemap implementation
o xfs iomap based Io path implementation
o buffer error handling fixes
o tracking of in flight buffer IO for unmount serialisation
o direct IO and DAX io path separation and simplification
o shortform directory format definition changes for wider platform compatibility
o various buffer cache fixes
o cleanups in preparation for rmap merge
o error injection cleanups and fixes
o log item format buffer memory allocation restructuring to prevent rare OOM
reclaim deadlocks
o sparse inode chunks are now fully supported.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=vcSd
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs updates from Dave Chinner:
"The major addition is the new iomap based block mapping
infrastructure. We've been kicking this about locally for years, but
there are other filesystems want to use it too (e.g. gfs2). Now it
is fully working, reviewed and ready for merge and be used by other
filesystems.
There are a lot of other fixes and cleanups in the tree, but those are
XFS internal things and none are of the scale or visibility of the
iomap changes. See below for details.
I am likely to send another pull request next week - we're just about
ready to merge some new functionality (on disk block->owner reverse
mapping infrastructure), but that's a huge chunk of code (74 files
changed, 7283 insertions(+), 1114 deletions(-)) so I'm keeping that
separate to all the "normal" pull request changes so they don't get
lost in the noise.
Summary of changes in this update:
- generic iomap based IO path infrastructure
- generic iomap based fiemap implementation
- xfs iomap based Io path implementation
- buffer error handling fixes
- tracking of in flight buffer IO for unmount serialisation
- direct IO and DAX io path separation and simplification
- shortform directory format definition changes for wider platform
compatibility
- various buffer cache fixes
- cleanups in preparation for rmap merge
- error injection cleanups and fixes
- log item format buffer memory allocation restructuring to prevent
rare OOM reclaim deadlocks
- sparse inode chunks are now fully supported"
* tag 'xfs-for-linus-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (53 commits)
xfs: remove EXPERIMENTAL tag from sparse inode feature
xfs: bufferhead chains are invalid after end_page_writeback
xfs: allocate log vector buffers outside CIL context lock
libxfs: directory node splitting does not have an extra block
xfs: remove dax code from object file when disabled
xfs: skip dirty pages in ->releasepage()
xfs: remove __arch_pack
xfs: kill xfs_dir2_inou_t
xfs: kill xfs_dir2_sf_off_t
xfs: split direct I/O and DAX path
xfs: direct calls in the direct I/O path
xfs: stop using generic_file_read_iter for direct I/O
xfs: split xfs_file_read_iter into buffered and direct I/O helpers
xfs: remove s_maxbytes enforcement in xfs_file_read_iter
xfs: kill ioflags
xfs: don't pass ioflags around in the ioctl path
xfs: track and serialize in-flight async buffers against unmount
xfs: exclude never-released buffers from buftarg I/O accounting
xfs: don't reset b_retries to 0 on every failure
xfs: remove extraneous buffer flag changes
...
Newly allocated XFS metadata buffers are added to the LRU once the hold
count is released, which typically occurs after I/O completion. There is
no other mechanism at current that tracks the existence or I/O state of
a new buffer. Further, readahead I/O tends to be submitted
asynchronously by nature, which means the I/O can remain in flight and
actually complete long after the calling context is gone. This means
that file descriptors or any other holds on the filesystem can be
released, allowing the filesystem to be unmounted while I/O is still in
flight. When I/O completion occurs, core data structures may have been
freed, causing completion to run into invalid memory accesses and likely
to panic.
This problem is reproduced on XFS via directory readahead. A filesystem
is mounted, a directory is opened/closed and the filesystem immediately
unmounted. The open/close cycle triggers a directory readahead that if
delayed long enough, runs buffer I/O completion after the unmount has
completed.
To address this problem, add a mechanism to track all in-flight,
asynchronous buffers using per-cpu counters in the buftarg. The buffer
is accounted on the first I/O submission after the current reference is
acquired and unaccounted once the buffer is returned to the LRU or
freed. Update xfs_wait_buftarg() to wait on all in-flight I/O before
walking the LRU list. Once in-flight I/O has completed and the workqueue
has drained, all new buffers should have been released onto the LRU.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The upcoming buftarg I/O accounting mechanism maintains a count of
all buffers that have undergone I/O in the current hold-release
cycle. Certain buffers associated with core infrastructure (e.g.,
the xfs_mount superblock buffer, log buffers) are never released,
however. This means that accounting I/O submission on such buffers
elevates the buftarg count indefinitely and could lead to lockup on
unmount.
Define a new buffer flag to explicitly exclude buffers from buftarg
I/O accounting. Set the flag on the superblock and associated log
buffers.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Fix up a couple places where extra flag manipulation occurs.
In the first case we clear XBF_ASYNC and then immediately reset it -
so don't bother clearing in the first place.
In the 2nd case we are at a point in the function where the buffer
must already be async, so there is no need to reset it.
Add consistent spacing around the " | " while we're at it.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Create a second buf_trylock tracepoint so that we can distinguish
between a successful and a failed trylock. With this piece, we can
use a script to look at the ftrace output to detect buffer deadlocks.
[dchinner: update to if/else as per hch's suggestion]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
BIO_MAX_PAGES is used as maximum count of bvecs, so
replace BIO_MAX_SECTORS with BIO_MAX_PAGES since
BIO_MAX_SECTORS is to be removed.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Tested-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
To avoid confusion between REQ_OP_FLUSH, which is handled by
request_fn drivers, and upper layers requesting the block layer
perform a flush sequence along with possibly a WRITE, this patch
renames REQ_FLUSH to REQ_PREFLUSH.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Separate the op from the rq_flag_bits and have xfs
set/get the bio using bio_set_op_attrs/bio_op.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This has callers of submit_bio/submit_bio_wait set the bio->bi_rw
instead of passing it in. This makes that use the same as
generic_make_request and how we set the other bio fields.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Fixed up fs/ext4/crypto.c
Signed-off-by: Jens Axboe <axboe@fb.com>
When we have a lot of metadata to flush from the AIL, the buffer
list can get very long. The current submission code tries to batch
submission to optimise IO order of the metadata (i.e. ascending
block order) to maximise block layer merging or IO to adjacent
metadata blocks.
Unfortunately, the method used can result in long lock times
occurring as buffers locked early on in the buffer list might not be
dispatched until the end of the IO licst processing. This is because
sorting does not occur util after the buffer list has been processed
and the buffers that are going to be submitted are locked. Hence
when the buffer list is several thousand buffers long, the lock hold
times before IO dispatch can be significant.
To fix this, sort the buffer list before we start trying to lock and
submit buffers. This means we can now submit buffers immediately
after they are locked, allowing merging to occur immediately on the
plug and dispatch to occur as quickly as possible. This means there
is minimal delay between locking the buffer and IO submission
occuring, hence reducing the worst case lock hold times seen during
delayed write buffer IO submission signficantly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reports have surfaced of a lockdep splat complaining about an
irq-safe -> irq-unsafe locking order in the xfs_buf_bio_end_io() bio
completion handler. This only occurs when I/O errors are present
because bp->b_lock is only acquired in this context to protect
setting an error on the buffer. The problem is that this lock can be
acquired with the (request_queue) q->queue_lock held. See
scsi_end_request() or ata_qc_schedule_eh(), for example.
Replace the locked test/set of b_io_error with a cmpxchg() call.
This eliminates the need for the lock and thus the lock ordering
problem goes away.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
They only set/clear/check a flag, no need for obfuscating this
with a macro.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This update contains:
o promotion of XFS_IOC_FS[GS]ETXATTR ioctl to the vfs level so that
it can be shared with other filesystems. The ext4 project quota
functionality is the first target for this. The commits in this
series have not been updated with review or final SOB tags because
the branch they were originally published in was needed by ext4.
Those tags are:
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Dave Chinner <david@fromrobit.com>
o Revert a change that is causing suspend failures.
o Fix a use-after-free that can occur on log mount failures. Been
around forever, but now exposed by other changes to log recovery
made in the first 4.5 merge.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=wEy8
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull more xfs updates from Dave Chinner:
"This is the second update for XFS that I mentioned in the original
pull request last week.
It contains a revert for a suspend regression in 4.4 and a fix for a
long standing log recovery issue that has been further exposed by all
the log recovery changes made in the original 4.5 merge.
There is one more thing in this pull request - one that I forgot to
merge into the origin. That is, pulling the XFS_IOC_FS[GS]ETXATTR
ioctl up to the VFS level so that other filesystems can also use it
for modifying project quota IDs
Summary:
- promotion of XFS_IOC_FS[GS]ETXATTR ioctl to the vfs level so that
it can be shared with other filesystems. The ext4 project quota
functionality is the first target for this. The commits in this
series have not been updated with review or final SOB tags because
the branch they were originally published in was needed by ext4.
Those tags are:
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Dave Chinner <david@fromrobit.com>
- Revert a change that is causing suspend failures.
- Fix a use-after-free that can occur on log mount failures. Been
around forever, but now exposed by other changes to log recovery
made in the first 4.5 merge"
* tag 'xfs-for-linus-4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
xfs: log mount failures don't wait for buffers to be released
Revert "xfs: clear PF_NOFREEZE for xfsaild kthread"
xfs: introduce per-inode DAX enablement
xfs: use FS_XFLAG definitions directly
fs: XFS_IOC_FS[SG]SETXATTR to FS_IOC_FS[SG]ETXATTR promotion
Recently I've been seeing xfs/051 fail on 1k block size filesystems.
Trying to trace the events during the test lead to the problem going
away, indicating that it was a race condition that lead to this
ASSERT failure:
XFS: Assertion failed: atomic_read(&pag->pag_ref) == 0, file: fs/xfs/xfs_mount.c, line: 156
.....
[<ffffffff814e1257>] xfs_free_perag+0x87/0xb0
[<ffffffff814e21b9>] xfs_mountfs+0x4d9/0x900
[<ffffffff814e5dff>] xfs_fs_fill_super+0x3bf/0x4d0
[<ffffffff811d8800>] mount_bdev+0x180/0x1b0
[<ffffffff814e3ff5>] xfs_fs_mount+0x15/0x20
[<ffffffff811d90a8>] mount_fs+0x38/0x170
[<ffffffff811f4347>] vfs_kern_mount+0x67/0x120
[<ffffffff811f7018>] do_mount+0x218/0xd60
[<ffffffff811f7e5b>] SyS_mount+0x8b/0xd0
When I finally caught it with tracing enabled, I saw that AG 2 had
an elevated reference count and a buffer was responsible for it. I
tracked down the specific buffer, and found that it was missing the
final reference count release that would put it back on the LRU and
hence be found by xfs_wait_buftarg() calls in the log mount failure
handling.
The last four traces for the buffer before the assert were (trimmed
for relevance)
kworker/0:1-5259 xfs_buf_iodone: hold 2 lock 0 flags ASYNC
kworker/0:1-5259 xfs_buf_ioerror: hold 2 lock 0 error -5
mount-7163 xfs_buf_lock_done: hold 2 lock 0 flags ASYNC
mount-7163 xfs_buf_unlock: hold 2 lock 1 flags ASYNC
This is an async write that is completing, so there's nobody waiting
for it directly. Hence we call xfs_buf_relse() once all the
processing is complete. That does:
static inline void xfs_buf_relse(xfs_buf_t *bp)
{
xfs_buf_unlock(bp);
xfs_buf_rele(bp);
}
Now, it's clear that mount is waiting on the buffer lock, and that
it has been released by xfs_buf_relse() and gained by mount. This is
expected, because at this point the mount process is in
xfs_buf_delwri_submit() waiting for all the IO it submitted to
complete.
The mount process, however, is waiting on the lock for the buffer
because it is in xfs_buf_delwri_submit(). This waits for IO
completion, but it doesn't wait for the buffer reference owned by
the IO to go away. The mount process collects all the completions,
fails the log recovery, and the higher level code then calls
xfs_wait_buftarg() to free all the remaining buffers in the
filesystem.
The issue is that on unlocking the buffer, the scheduler has decided
that the mount process has higher priority than the the kworker
thread that is running the IO completion, and so immediately
switched contexts to the mount process from the semaphore unlock
code, hence preventing the kworker thread from finishing the IO
completion and releasing the IO reference to the buffer.
Hence by the time that xfs_wait_buftarg() is run, the buffer still
has an active reference and so isn't on the LRU list that the
function walks to free the remaining buffers. Hence we miss that
buffer and continue onwards to tear down the mount structures,
at which time we get find a stray reference count on the perag
structure. On a non-debug kernel, this will be ignored and the
structure torn down and freed. Hence when the kworker thread is then
rescheduled and the buffer released and freed, it will access a
freed perag structure.
The problem here is that when the log mount fails, we still need to
quiesce the log to ensure that the IO workqueues have returned to
idle before we run xfs_wait_buftarg(). By synchronising the
workqueues, we ensure that all IO completions are fully processed,
not just to the point where buffers have been unlocked. This ensures
we don't end up in the situation above.
cc: <stable@vger.kernel.org> # 3.18
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This update contains:
o extensive CRC validation during log recovery
o several log recovery bug fixes
o Various DAX support fixes
o AGFL size calculation fix
o various cleanups in preparation for new functionality
o project quota ENOSPC notification via netlink
o tracing and debug improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=eCYp
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs updates from Dave Chinner:
"There's not a lot in this - the main addition is the CRC validation of
the entire region of the log that the will be recovered, along with
several log recovery fixes. Most of the rest is small bug fixes and
cleanups.
I have three bug fixes still pending, all that address recently fixed
regressions that I will send to next week after they've had some time
in for-next.
Summary:
- extensive CRC validation during log recovery
- several log recovery bug fixes
- Various DAX support fixes
- AGFL size calculation fix
- various cleanups in preparation for new functionality
- project quota ENOSPC notification via netlink
- tracing and debug improvements"
* tag 'xfs-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (26 commits)
xfs: handle dquot buffer readahead in log recovery correctly
xfs: inode recovery readahead can race with inode buffer creation
xfs: eliminate committed arg from xfs_bmap_finish
xfs: bmapbt checking on debug kernels too expensive
xfs: add tracepoints to readpage calls
xfs: debug mode log record crc error injection
xfs: detect and trim torn writes during log recovery
xfs: fix recursive splice read locking with DAX
xfs: Don't use reserved blocks for data blocks with DAX
XFS: Use a signed return type for suffix_kstrtoint()
libxfs: refactor short btree block verification
libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct
libxfs: use a convenience variable instead of open-coding the fork
xfs: fix log ticket type printing
libxfs: make xfs_alloc_fix_freelist non-static
xfs: make xfs_buf_ioend_async() static
xfs: send warning of project quota to userspace via netlink
xfs: get mp from bma->ip in xfs_bmap code
xfs: print name of verifier if it fails
libxfs: Optimize the loop for xfs_bitmap_empty
...
When we do inode readahead in log recovery, we do can do the
readahead before we've replayed the icreate transaction that stamps
the buffer with inode cores. The inode readahead verifier catches
this and marks the buffer as !done to indicate that it doesn't yet
contain valid inodes.
In adding buffer error notification (i.e. setting b_error = -EIO at
the same time as as we clear the done flag) to such a readahead
verifier failure, we can then get subsequent inode recovery failing
with this error:
XFS (dm-0): metadata I/O error: block 0xa00060 ("xlog_recover_do..(read#2)") error 5 numblks 32
This occurs when readahead completion races with icreate item replay
such as:
inode readahead
find buffer
lock buffer
submit RA io
....
icreate recovery
xfs_trans_get_buffer
find buffer
lock buffer
<blocks on RA completion>
.....
<ra completion>
fails verifier
clear XBF_DONE
set bp->b_error = -EIO
release and unlock buffer
<icreate gains lock>
icreate initialises buffer
marks buffer as done
adds buffer to delayed write queue
releases buffer
At this point, we have an initialised inode buffer that is up to
date but has an -EIO state registered against it. When we finally
get to recovering an inode in that buffer:
inode item recovery
xfs_trans_read_buffer
find buffer
lock buffer
sees XBF_DONE is set, returns buffer
sees bp->b_error is set
fail log recovery!
Essentially, we need xfs_trans_get_buf_map() to clear the error status of
the buffer when doing a lookup. This function returns uninitialised
buffers, so the buffer returned can not be in an error state and
none of the code that uses this function expects b_error to be set
on return. Indeed, there is an ASSERT(!bp->b_error); in the
transaction case in xfs_trans_get_buf_map() that would have caught
this if log recovery used transactions....
This patch firstly changes the inode readahead failure to set -EIO
on the buffer, and secondly changes xfs_buf_get_map() to never
return a buffer with an error state set so this first change doesn't
cause unexpected log recovery failures.
cc: <stable@vger.kernel.org> # 3.12 - current
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
There are no callers of the xfs_buf_ioend_async() function outside
of the fs/xfs/xfs_buf.c. So, let's make it static.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This patch modifies the stats counting macros and the callers
to those macros to properly increment, decrement, and add-to
the xfs stats counts. The counts for global and per-fs stats
are correctly advanced, and cleared by writing a "1" to the
corresponding clear file.
global counts: /sys/fs/xfs/stats/stats
per-fs counts: /sys/fs/xfs/sda*/stats/stats
global clear: /sys/fs/xfs/stats/stats_clear
per-fs clear: /sys/fs/xfs/sda*/stats/stats_clear
[dchinner: cleaned up macro variables, removed CONFIG_FS_PROC around
stats structures and macros. ]
Signed-off-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This patch adds comm name and pid to warning messages printed by
kmem_alloc(), kmem_zone_alloc() and xfs_buf_allocate_memory().
This will help telling which memory allocations (e.g. kernel worker
threads, OOM victim tasks, neither) are stalling because these functions
are passing __GFP_NOWARN which suppresses not only backtrace but comm name
and pid.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This update contains:
o large rework of EFI/EFD lifecycle handling to fix log recovery corruption
issues, crashes and unmount hangs
o separate metadata UUID on disk to enable changing boot label UUID for v5
filesystems
o fixes for gcc miscompilation on certain platforms and optimisation levels
o remote attribute allocation and recovery corruption fixes
o inode lockdep annotation rework to fix bugs with too many subclasses
o directory inode locking changes to prevent lockdep false positives
o a handful of minor corruption fixes
o various other small cleanups and bug fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=Eikc
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs updates from Dave Chinner:
"There isn't a whole lot to this update - it's mostly bug fixes and
they are spread pretty much all over XFS. There are some corruption
fixes, some fixes for log recovery, some fixes that prevent unount
from hanging, a lockdep annotation rework for inode locking to prevent
false positives and the usual random bunch of cleanups and minor
improvements.
Deatils:
- large rework of EFI/EFD lifecycle handling to fix log recovery
corruption issues, crashes and unmount hangs
- separate metadata UUID on disk to enable changing boot label UUID
for v5 filesystems
- fixes for gcc miscompilation on certain platforms and optimisation
levels
- remote attribute allocation and recovery corruption fixes
- inode lockdep annotation rework to fix bugs with too many
subclasses
- directory inode locking changes to prevent lockdep false positives
- a handful of minor corruption fixes
- various other small cleanups and bug fixes"
* tag 'xfs-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (42 commits)
xfs: fix error gotos in xfs_setattr_nonsize
xfs: add mssing inode cache attempts counter increment
xfs: return errors from partial I/O failures to files
libxfs: bad magic number should set da block buffer error
xfs: fix non-debug build warnings
xfs: collapse allocsize and biosize mount option handling
xfs: Fix file type directory corruption for btree directories
xfs: lockdep annotations throw warnings on non-debug builds
xfs: Fix uninitialized return value in xfs_alloc_fix_freelist()
xfs: inode lockdep annotations broke non-lockdep build
xfs: flush entire file on dio read/write to cached file
xfs: Fix xfs_attr_leafblock definition
libxfs: readahead of dir3 data blocks should use the read verifier
xfs: stop holding ILOCK over filldir callbacks
xfs: clean up inode lockdep annotations
xfs: swap leaf buffer into path struct atomically during path shift
xfs: relocate sparse inode mount warning
xfs: dquots should be stamped with sb_meta_uuid
xfs: log recovery needs to validate against sb_meta_uuid
xfs: growfs not aware of sb_meta_uuid
...
There seem to be a couple of new set-but-unused build warnings
that gcc 4.9.3 is now warning about. These are not regressions, just
the compiler being more picky.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently we have two different ways to signal an I/O error on a BIO:
(1) by clearing the BIO_UPTODATE flag
(2) by returning a Linux errno value to the bi_end_io callback
The first one has the drawback of only communicating a single possible
error (-EIO), and the second one has the drawback of not beeing persistent
when bios are queued up, and are not passed along from child to parent
bio in the ever more popular chaining scenario. Having both mechanisms
available has the additional drawback of utterly confusing driver authors
and introducing bugs where various I/O submitters only deal with one of
them, and the others have to add boilerplate code to deal with both kinds
of error returns.
So add a new bi_error field to store an errno value directly in struct
bio and remove the existing mechanisms to clean all this up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The second and subsequent lines of multi-line logging messages
are not prefixed with the same information as the first line.
Separate messages with newlines into multiple calls to ensure
consistent prefixing and allow easier grep use.
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This avoids all kinds of unessecary casts in an envrionment like Linux where
we can assume that pointer arithmetics are support on void pointers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently, the isolate callback passed to the list_lru_walk family of
functions is supposed to just delete an item from the list upon returning
LRU_REMOVED or LRU_REMOVED_RETRY, while nr_items counter is fixed by
__list_lru_walk_one after the callback returns. Since the callback is
allowed to drop the lock after removing an item (it has to return
LRU_REMOVED_RETRY then), the nr_items can be less than the actual number
of elements on the list even if we check them under the lock. This makes
it difficult to move items from one list_lru_one to another, which is
required for per-memcg list_lru reparenting - we can't just splice the
lists, we have to move entries one by one.
This patch therefore introduces helpers that must be used by callback
functions to isolate items instead of raw list_del/list_move. These are
list_lru_isolate and list_lru_isolate_move. They not only remove the
entry from the list, but also fix the nr_items counter, making sure
nr_items always reflects the actual number of elements on the list if
checked under the appropriate lock.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kmem accounting of memcg is unusable now, because it lacks slab shrinker
support. That means when we hit the limit we will get ENOMEM w/o any
chance to recover. What we should do then is to call shrink_slab, which
would reclaim old inode/dentry caches from this cgroup. This is what
this patch set is intended to do.
Basically, it does two things. First, it introduces the notion of
per-memcg slab shrinker. A shrinker that wants to reclaim objects per
cgroup should mark itself as SHRINKER_MEMCG_AWARE. Then it will be
passed the memory cgroup to scan from in shrink_control->memcg. For
such shrinkers shrink_slab iterates over the whole cgroup subtree under
the target cgroup and calls the shrinker for each kmem-active memory
cgroup.
Secondly, this patch set makes the list_lru structure per-memcg. It's
done transparently to list_lru users - everything they have to do is to
tell list_lru_init that they want memcg-aware list_lru. Then the
list_lru will automatically distribute objects among per-memcg lists
basing on which cgroup the object is accounted to. This way to make FS
shrinkers (icache, dcache) memcg-aware we only need to make them use
memcg-aware list_lru, and this is what this patch set does.
As before, this patch set only enables per-memcg kmem reclaim when the
pressure goes from memory.limit, not from memory.kmem.limit. Handling
memory.kmem.limit is going to be tricky due to GFP_NOFS allocations, and
it is still unclear whether we will have this knob in the unified
hierarchy.
This patch (of 9):
NUMA aware slab shrinkers use the list_lru structure to distribute
objects coming from different NUMA nodes to different lists. Whenever
such a shrinker needs to count or scan objects from a particular node,
it issues commands like this:
count = list_lru_count_node(lru, sc->nid);
freed = list_lru_walk_node(lru, sc->nid, isolate_func,
isolate_arg, &sc->nr_to_scan);
where sc is an instance of the shrink_control structure passed to it
from vmscan.
To simplify this, let's add special list_lru functions to be used by
shrinkers, list_lru_shrink_count() and list_lru_shrink_walk(), which
consolidate the nid and nr_to_scan arguments in the shrink_control
structure.
This will also allow us to avoid patching shrinkers that use list_lru
when we make shrink_slab() per-memcg - all we will have to do is extend
the shrink_control structure to include the target memcg and make
list_lru_shrink_{count,walk} handle this appropriately.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Suggested-by: Dave Chinner <david@fromorbit.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Cc: Glauber Costa <glommer@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
XFS traditionally sends all buffer I/O completion work to a single
workqueue. This includes metadata buffer completion and log buffer
completion. The log buffer completion requires a high priority queue to
prevent stalls due to log forces getting stuck behind other queued work.
Rather than continue to prioritize all buffer I/O completion due to the
needs of log completion, split log buffer completion off to
m_log_workqueue and move the high priority flag from m_buf_workqueue to
m_log_workqueue.
Add a b_ioend_wq wq pointer to xfs_buf to allow completion workqueue
customization on a per-buffer basis. Initialize b_ioend_wq to
m_buf_workqueue by default in the generic buffer I/O submission path.
Finally, override the default wq with the high priority m_log_workqueue
in the log buffer I/O submission path.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
More on-disk format consolidation. A few declarations that weren't on-disk
format related move into better suitable spots.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Here blkno is a daddr_t, which is a __s64; it's possible to hold
a value which is negative, and thus pass the (blkno >= eofs)
test. Then we try to do a xfs_perag_get() for a ridiculous
agno via xfs_daddr_to_agno(), and bad things happen when that
fails, and returns a null pag which is dereferenced shortly
thereafter.
Found via a user-supplied fuzzed image...
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The xfslogd workqueue is a global, single-job workqueue for buffer ioend
processing. This means we allow for a single work item at a time for all
possible XFS mounts on a system. fsstress testing in loopback XFS over
XFS configurations has reproduced xfslogd deadlocks due to the single
threaded nature of the queue and dependencies introduced between the
separate XFS instances by online discard (-o discard).
Discard over a loopback device converts the discard request to a hole
punch (fallocate) on the underlying file. Online discard requests are
issued synchronously and from xfslogd context in XFS, hence the xfslogd
workqueue is blocked in the upper fs waiting on a hole punch request to
be servied in the lower fs. If the lower fs issues I/O that depends on
xfslogd to complete, both filesystems end up hung indefinitely. This is
reproduced reliabily by generic/013 on XFS->loop->XFS test devices with
the '-o discard' mount option.
Further, docker implementations appear to use this kind of configuration
for container instance filesystems by default (container fs->dm->
loop->base fs) and therefore are subject to this deadlock when running
on XFS.
Replace the global xfslogd workqueue with a per-mount variant. This
guarantees each mount access to a single worker and prevents deadlocks
due to inter-fs dependencies introduced by discard. Since the queue is
only responsible for buffer iodone processing at this point in time,
rename xfslogd to xfs-buf.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Pull core block layer changes from Jens Axboe:
"This is the core block IO pull request for 3.18. Apart from the new
and improved flush machinery for blk-mq, this is all mostly bug fixes
and cleanups.
- blk-mq timeout updates and fixes from Christoph.
- Removal of REQ_END, also from Christoph. We pass it through the
->queue_rq() hook for blk-mq instead, freeing up one of the request
bits. The space was overly tight on 32-bit, so Martin also killed
REQ_KERNEL since it's no longer used.
- blk integrity updates and fixes from Martin and Gu Zheng.
- Update to the flush machinery for blk-mq from Ming Lei. Now we
have a per hardware context flush request, which both cleans up the
code should scale better for flush intensive workloads on blk-mq.
- Improve the error printing, from Rob Elliott.
- Backing device improvements and cleanups from Tejun.
- Fixup of a misplaced rq_complete() tracepoint from Hannes.
- Make blk_get_request() return error pointers, fixing up issues
where we NULL deref when a device goes bad or missing. From Joe
Lawrence.
- Prep work for drastically reducing the memory consumption of dm
devices from Junichi Nomura. This allows creating clone bio sets
without preallocating a lot of memory.
- Fix a blk-mq hang on certain combinations of queue depths and
hardware queues from me.
- Limit memory consumption for blk-mq devices for crash dump
scenarios and drivers that use crazy high depths (certain SCSI
shared tag setups). We now just use a single queue and limited
depth for that"
* 'for-3.18/core' of git://git.kernel.dk/linux-block: (58 commits)
block: Remove REQ_KERNEL
blk-mq: allocate cpumask on the home node
bio-integrity: remove the needless fail handle of bip_slab creating
block: include func name in __get_request prints
block: make blk_update_request print prefix match ratelimited prefix
blk-merge: don't compute bi_phys_segments from bi_vcnt for cloned bio
block: fix alignment_offset math that assumes io_min is a power-of-2
blk-mq: Make bt_clear_tag() easier to read
blk-mq: fix potential hang if rolling wakeup depth is too high
block: add bioset_create_nobvec()
block: use bio_clone_fast() in blk_rq_prep_clone()
block: misplaced rq_complete tracepoint
sd: Honor block layer integrity handling flags
block: Replace strnicmp with strncasecmp
block: Add T10 Protection Information functions
block: Don't merge requests if integrity flags differ
block: Integrity checksum flag
block: Relocate bio integrity flags
block: Add a disk flag to block integrity profile
block: Add prefix to block integrity profile flags
...
xfs_buf_read_uncached() has two failure modes. If can either return
NULL or bp->b_error != 0 depending on the type of failure, and not
all callers check for both. Fix it so that xfs_buf_read_uncached()
always returns the error status, and the buffer is returned as a
function parameter. The buffer will only be returned on success.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
There is a lot of cookie-cutter code that looks like:
if (shutdown)
handle buffer error
xfs_buf_iorequest(bp)
error = xfs_buf_iowait(bp)
if (error)
handle buffer error
spread through XFS. There's significant complexity now in
xfs_buf_iorequest() to specifically handle this sort of synchronous
IO pattern, but there's all sorts of nasty surprises in different
error handling code dependent on who owns the buffer references and
the locks.
Pull this pattern into a single helper, where we can hide all the
synchronous IO warts and hence make the error handling for all the
callers much saner. This removes the need for a special extra
reference to protect IO completion processing, as we can now hold a
single reference across dispatch and waiting, simplifying the sync
IO smeantics and error handling.
In doing this, also rename xfs_buf_iorequest to xfs_buf_submit and
make it explicitly handle on asynchronous IO. This forces all users
to be switched specifically to one interface or the other and
removes any ambiguity between how the interfaces are to be used. It
also means that xfs_buf_iowait() goes away.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
There is only one caller now - xfs_trans_read_buf_map() - and it has
very well defined call semantics - read, synchronous, and b_iodone
is NULL. Hence it's pretty clear what error handling is necessary
for this case. The bigger problem of untangling
xfs_trans_read_buf_map error handling is left to a future patch.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Internal buffer write error handling is a mess due to the unnatural
split between xfs_bioerror and xfs_bioerror_relse().
xfs_bwrite() only does sync IO and determines the handler to
call based on b_iodone, so for this caller the only difference
between xfs_bioerror() and xfs_bioerror_release() is the XBF_DONE
flag. We don't care what the XBF_DONE flag state is because we stale
the buffer in both paths - the next buffer lookup will clear
XBF_DONE because XBF_STALE is set. Hence we can use common
error handling for xfs_bwrite().
__xfs_buf_delwri_submit() is a similar - it's only ever called
on writes - all sync or async - and again there's no reason to
handle them any differently at all.
Clean up the nasty error handling and remove xfs_bioerror().
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Only has two callers, and is just a shutdown check and error handler
around xfs_buf_iorequest. However, the error handling is a mess of
read and write semantics, and both internal callers only call it for
writes. Hence kill the wrapper, and follow up with a patch to
sanitise the error handling.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently the report of a bio error from completion
immediately marks the buffer with an error. The issue is that this
is racy w.r.t. synchronous IO - the submitter can see b_error being
set before the IO is complete, and hence we cannot differentiate
between submission failures and completion failures.
Add an internal b_io_error field protected by the b_lock to catch IO
completion errors, and only propagate that to the buffer during
final IO completion handling. Hence we can tell in xfs_buf_iorequest
if we've had a submission failure bey checking bp->b_error before
dropping our b_io_remaining reference - that reference will prevent
b_io_error values from being propagated to b_error in the event that
completion races with submission.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We do some work in xfs_buf_ioend, and some work in
xfs_buf_iodone_work, but much of that functionality is the same.
This work can all be done in a single function, leaving
xfs_buf_iodone just a wrapper to determine if we should execute it
by workqueue or directly. hence rename xfs_buf_iodone_work to
xfs_buf_ioend(), and add a new xfs_buf_ioend_async() for places that
need async processing.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When synchronous IO runs IO completion work, it does so without an
IO reference or a hold reference on the buffer. The IO "hold
reference" is owned by the submitter, and released when the
submission is complete. The IO reference is released when both the
submitter and the bio end_io processing is run, and so if the io
completion work is run from IO completion context, it is run without
an IO reference.
Hence we can get the situation where the submitter can submit the
IO, see an error on the buffer and unlock and free the buffer while
there is still IO in progress. This leads to use-after-free and
memory corruption.
Fix this by taking a "sync IO hold" reference that is owned by the
IO and not released until after the buffer completion calls are run
to wake up synchronous waiters. This means that the buffer will not
be freed in any circumstance until all IO processing is completed.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
For the special case of delwri buffer submission and waiting, we
don't need to issue IO synchronously at all. The second pass to call
xfs_buf_iowait() can be replaced with blocking on xfs_buf_lock() -
the buffer will be unlocked when the async IO is complete.
This formalises a sane the method of waiting for async IO - take an
extra reference, submit the IO, call xfs_buf_lock() when you want to
wait for IO completion. i.e.:
bp = xfs_buf_find();
xfs_buf_hold(bp);
bp->b_flags |= XBF_ASYNC;
xfs_buf_iosubmit(bp);
xfs_buf_lock(bp)
error = bp->b_error;
....
xfs_buf_relse(bp);
While this is somewhat racy for gathering IO errors, none of the
code that calls xfs_buf_delwri_submit() will race against other
users of the buffers being submitted. Even if they do, we don't
really care if the error is detected by the delwri code or the user
we raced against. Either way, the error will be detected and
handled.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Workqueues must be explicitly set as freezable to ensure they are frozen
in the assocated part of the hibernation/suspend sequence. Freezing of
workqueues and kernel threads is important to ensure that modifications
are not made on-disk after the hibernation image has been created.
Otherwise, the in-memory state can become inconsistent with what is on
disk and eventually lead to filesystem corruption. We have reports of
free space btree corruptions that occur immediately after restore from
hibernate that suggest the xfs-eofblocks workqueue could be causing
such problems if it races with hibernation.
Mark all of the internal XFS workqueues as freezable to ensure nothing
changes on-disk once the freezer infrastructure freezes kernel threads
and creates the hibernation image.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reported-by: Carlos E. R. <carlos.e.r@opensuse.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
bdev_get_queue() returns the request_queue associated with the
specified block_device. blk_get_backing_dev_info() makes use of
bdev_get_queue() to determine the associated bdi given a block_device.
All the callers of bdev_get_queue() including
blk_get_backing_dev_info() assume that bdev_get_queue() may return
NULL and implement NULL handling; however, bdev_get_queue() requires
the passed in block_device is opened and attached to its gendisk.
Because an active gendisk always has a valid request_queue associated
with it, bdev_get_queue() can never return NULL and neither can
blk_get_backing_dev_info().
Make it clear that neither of the two functions can return NULL and
remove NULL handling from all the callers.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
We recently had a bug where buffers were slipping through log
recovery without any verifier attached to them. This was resulting
in on-disk CRC mismatches for valid data. Add some warning code to
catch this occurrence so that we catch such bugs during development
rather than not being aware they exist.
Note that we cannot do this verification unconditionally as non-CRC
filesystems don't always attach verifiers to the buffers being
written. e.g. during log recovery we cannot identify all the
different types of buffers correctly on non-CRC filesystems, so we
can't attach the correct verifiers in all cases and so we don't
attach any. Hence we don't want on non-CRC filesystems to avoid
spamming the logs with false indications.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Convert all the errors the core XFs code to negative error signs
like the rest of the kernel and remove all the sign conversion we
do in the interface layers.
Errors for conversion (and comparison) found via searches like:
$ git grep " E" fs/xfs
$ git grep "return E" fs/xfs
$ git grep " E[A-Z].*;$" fs/xfs
Negation points found via searches like:
$ git grep "= -[a-z,A-Z]" fs/xfs
$ git grep "return -[a-z,A-D,F-Z]" fs/xfs
$ git grep " -[a-z].*;" fs/xfs
[ with some bits I missed from Brian Foster ]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When testing exhaustion of dm snapshots, the following appeared
with CONFIG_DEBUG_OBJECTS_FREE enabled:
ODEBUG: free active (active state 0) object type: work_struct hint: xfs_buf_iodone_work+0x0/0x1d0 [xfs]
indicating that we'd freed a buffer which still had a pending reference,
down this path:
[ 190.867975] [<ffffffff8133e6fb>] debug_check_no_obj_freed+0x22b/0x270
[ 190.880820] [<ffffffff811da1d0>] kmem_cache_free+0xd0/0x370
[ 190.892615] [<ffffffffa02c5924>] xfs_buf_free+0xe4/0x210 [xfs]
[ 190.905629] [<ffffffffa02c6167>] xfs_buf_rele+0xe7/0x270 [xfs]
[ 190.911770] [<ffffffffa034c826>] xfs_trans_read_buf_map+0x7b6/0xac0 [xfs]
At issue is the fact that if IO fails in xfs_buf_iorequest,
we'll queue completion unconditionally, and then call
xfs_buf_rele; but if IO failed, there are no IOs remaining,
and xfs_buf_rele will free the bp while work is still queued.
Fix this by not scheduling completion if the buffer has
an error on it; run it immediately. The rest is only comment
changes.
Thanks to dchinner for spotting the root cause.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When we map pages in the buffer cache, we can do so in GFP_NOFS
contexts. However, the vmap interfaces do not provide any method of
communicating this information to memory reclaim, and hence we get
lockdep complaining about it regularly and occassionally see hangs
that may be vmap related reclaim deadlocks. We can also see these
same problems from anywhere where we use vmalloc for a large buffer
(e.g. attribute code) inside a transaction context.
A typical lockdep report shows up as a reclaim state warning like so:
[14046.101458] =================================
[14046.102850] [ INFO: inconsistent lock state ]
[14046.102850] 3.14.0-rc4+ #2 Not tainted
[14046.102850] ---------------------------------
[14046.102850] inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage.
[14046.102850] kswapd0/14 [HC0[0]:SC0[0]:HE1:SE1] takes:
[14046.102850] (&xfs_dir_ilock_class){++++?+}, at: [<791a04bb>] xfs_ilock+0xff/0x16a
[14046.102850] {RECLAIM_FS-ON-W} state was registered at:
[14046.102850] [<7904cdb1>] mark_held_locks+0x81/0xe7
[14046.102850] [<7904d390>] lockdep_trace_alloc+0x5c/0xb4
[14046.102850] [<790c2c28>] kmem_cache_alloc_trace+0x2b/0x11e
[14046.102850] [<790ba7f4>] vm_map_ram+0x119/0x3e6
[14046.102850] [<7914e124>] _xfs_buf_map_pages+0x5b/0xcf
[14046.102850] [<7914ed74>] xfs_buf_get_map+0x67/0x13f
[14046.102850] [<7917506f>] xfs_attr_rmtval_set+0x396/0x4d5
[14046.102850] [<7916e8bb>] xfs_attr_leaf_addname+0x18f/0x37d
[14046.102850] [<7916ed9e>] xfs_attr_set_int+0x2f5/0x3e8
[14046.102850] [<7916eefc>] xfs_attr_set+0x6b/0x74
[14046.102850] [<79168355>] xfs_xattr_set+0x61/0x81
[14046.102850] [<790e5b10>] generic_setxattr+0x59/0x68
[14046.102850] [<790e4c06>] __vfs_setxattr_noperm+0x58/0xce
[14046.102850] [<790e4d0a>] vfs_setxattr+0x8e/0x92
[14046.102850] [<790e4ddd>] setxattr+0xcf/0x159
[14046.102850] [<790e5423>] SyS_lsetxattr+0x88/0xbb
[14046.102850] [<79268438>] sysenter_do_call+0x12/0x36
Now, we can't completely remove these traces - mainly because
vm_map_ram() will do GFP_KERNEL allocation and that generates the
above warning before we get into the reclaim code, but we can turn
them all into false positive warnings.
To do that, use the method that DM and other IO context code uses to
avoid this problem: there is a process flag to tell memory reclaim
not to do IO that we can set appropriately. That prevents GFP_KERNEL
context reclaim being done from deep inside the vmalloc code in
places we can't directly pass a GFP_NOFS context to. That interface
has a pair of wrapper functions: memalloc_noio_save() and
memalloc_noio_restore().
Adding them around vm_map_ram and the vzalloc call in
kmem_alloc_large() will prevent deadlocks and most lockdep reports
for this issue. Also, convert the vzalloc() call in
kmem_alloc_large() to use __vmalloc() so that we can pass the
correct gfp context to the data page allocation routine inside
__vmalloc() so that it is clear that GFP_NOFS context is important
to this vmalloc call.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Pull core block IO changes from Jens Axboe:
"The major piece in here is the immutable bio_ve series from Kent, the
rest is fairly minor. It was supposed to go in last round, but
various issues pushed it to this release instead. The pull request
contains:
- Various smaller blk-mq fixes from different folks. Nothing major
here, just minor fixes and cleanups.
- Fix for a memory leak in the error path in the block ioctl code
from Christian Engelmayer.
- Header export fix from CaiZhiyong.
- Finally the immutable biovec changes from Kent Overstreet. This
enables some nice future work on making arbitrarily sized bios
possible, and splitting more efficient. Related fixes to immutable
bio_vecs:
- dm-cache immutable fixup from Mike Snitzer.
- btrfs immutable fixup from Muthu Kumar.
- bio-integrity fix from Nic Bellinger, which is also going to stable"
* 'for-3.14/core' of git://git.kernel.dk/linux-block: (44 commits)
xtensa: fixup simdisk driver to work with immutable bio_vecs
block/blk-mq-cpu.c: use hotcpu_notifier()
blk-mq: for_each_* macro correctness
block: Fix memory leak in rw_copy_check_uvector() handling
bio-integrity: Fix bio_integrity_verify segment start bug
block: remove unrelated header files and export symbol
blk-mq: uses page->list incorrectly
blk-mq: use __smp_call_function_single directly
btrfs: fix missing increment of bi_remaining
Revert "block: Warn and free bio if bi_end_io is not set"
block: Warn and free bio if bi_end_io is not set
blk-mq: fix initializing request's start time
block: blk-mq: don't export blk_mq_free_queue()
block: blk-mq: make blk_sync_queue support mq
block: blk-mq: support draining mq queue
dm cache: increment bi_remaining when bi_end_io is restored
block: fixup for generic bio chaining
block: Really silence spurious compiler warnings
block: Silence spurious compiler warnings
block: Kill bio_pair_split()
...
Some time ago, mkfs.xfs started picking the storage physical
sector size as the default filesystem "sector size" in order
to avoid RMW costs incurred by doing IOs at logical sector
size alignments.
However, this means that for a filesystem made with i.e.
a 4k sector size on an "advanced format" 4k/512 disk,
512-byte direct IOs are no longer allowed. This means
that XFS has essentially turned this AF drive into a hard
4K device, from the filesystem on up.
XFS's mkfs-specified "sector size" is really just controlling
the minimum size & alignment of filesystem metadata.
There is no real need to tightly couple XFS's minimal
metadata size to the minimum allowed direct IO size;
XFS can continue doing metadata in optimal sizes, but
still allow smaller DIOs for apps which issue them,
for whatever reason.
This patch adds a new field to the xfs_buftarg, so that
we now track 2 sizes:
1) The metadata sector size, which is the minimum unit and
alignment of IO which will be performed by metadata operations.
2) The device logical sector size
The first is used internally by the file system for metadata
alignment and IOs.
The second is used for the minimum allowed direct IO alignment.
This has passed xfstests on filesystems made with 4k sectors,
including when run under the patch I sent to ignore
XFS_IOC_DIOINFO, and issue 512 DIOs anyway. I also directly
tested end of block behavior on preallocated, sparse, and
existing files when we do a 512 IO into a 4k file on a
4k-sector filesystem, to be sure there were no unexpected
behaviors.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
In preparation for adding new members to the structure,
give these old ones more descriptive names:
bt_ssize -> bt_meta_sectorsize
bt_smask -> bt_meta_sectormask
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Clean up the xfs_buftarg structure a bit:
- remove bt_bsize which is never used
- replace bt_sshift with bt_ssize; we only ever shift it back
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJSwLfoAAoJEHm+PkMAQRiGi6QH/1U1B7lmHChDTw3jj1lfm9gA
189Si4QJlnxFWCKHvKEL+pcaVuACU+aMGI8+KyMYK4/JfuWVjjj5fr/SvyHH2/8m
LdSK8aHMhJ46uBS4WJ/l6v46qQa5e2vn8RKSBAyKm/h4vpt+hd6zJdoFrFai4th7
k/TAwOAEHI5uzexUChwLlUBRTvbq4U8QUvDu+DeifC8cT63CGaaJ4qVzjOZrx1an
eP6UXZrKDASZs7RU950i7xnFVDQu4PsjlZi25udsbeiKcZJgPqGgXz5ULf8ZH8RQ
YCi1JOnTJRGGjyIOyLj7pyB01h7XiSM2+eMQ0S7g54F2s7gCJ58c2UwQX45vRWU=
=/4/R
-----END PGP SIGNATURE-----
Merge tag 'v3.13-rc6' into for-3.14/core
Needed to bring blk-mq uptodate, since changes have been going in
since for-3.14/core was established.
Fixup merge issues related to the immutable biovec changes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Conflicts:
block/blk-flush.c
fs/btrfs/check-integrity.c
fs/btrfs/extent_io.c
fs/btrfs/scrub.c
fs/logfs/dev_bdev.c
If we are doing aysnc writeback of metadata, we can get write errors
but have nobody to report them to. At the moment, we simply attempt
to reissue the write from io completion in the hope that it's a
transient error.
When it's not a transient error, the buffer is stuck forever in
this loop, and we cannot break out of it. Eventually, unmount will
hang because the AIL cannot be emptied and everything goes downhill
from them.
To solve this problem, only retry the write IO once before aborting
it. We don't throw the buffer away because some transient errors can
last minutes (e.g. FC path failover) or even hours (thin
provisioned devices that have run out of backing space) before they
go away. Hence we really want to keep trying until we can't try any
more.
Because the buffer was not cleaned, however, it does not get removed
from the AIL and hence the next pass across the AIL will start IO on
it again. As such, we still get the "retry forever" semantics that
we currently have, but we allow other access to the buffer in the
mean time. Meanwhile the filesystem can continue to modify the
buffer and relog it, so the IO errors won't hang the log or the
filesystem.
Now when we are pushing the AIL, we can see all these "permanent IO
error" buffers and we can issue a warning about failures before we
retry the IO. We can also catch these buffers when unmounting an
issue a corruption warning, too.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
The xfsbdstrat helper is a small but useless wrapper for xfs_buf_iorequest that
handles the case of a shut down filesystem. Most of the users have private,
uncached buffers that can just be freed in this case, but the complex error
handling in xfs_bioerror_relse messes up the case when it's called without
a locked buffer.
Remove xfsbdstrat and opencode the error handling in the callers. All but
one can simply return an error and don't need to deal with buffer state,
and the one caller that cares about the buffer state could do with a major
cleanup as well, but we'll defer that to later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The "verbose" argument to xfs_setsize_buftarg_flags() has been
unused since:
ffe37436 xfs: stop using the page cache to back the buffer cache
Remove it, and fold the function into xfs_setsize_buftarg()
now that there's no need for different types of callers.
Fix inconsistent comment spacing while we're at it.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
xfs_trans.h has a dependency on xfs_log.h for a couple of
structures. Most code that does transactions doesn't need to know
anything about the log, but this dependency means that they have to
include xfs_log.h. Decouple the xfs_trans.h and xfs_log.h header
files and clean up the includes to be in dependency order.
In doing this, remove the direct include of xfs_trans_reserve.h from
xfs_trans.h so that we remove the dependency between xfs_trans.h and
xfs_mount.h. Hence the xfs_trans.h include can be moved to the
indicate the actual dependencies other header files have on it.
Note that these are kernel only header files, so this does not
translate to any userspace changes at all.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
__xfs_printk adds its own "\n". Having it in the original string
leads to unintentional blank lines from these messages.
Most format strings have no newline, but a few do, leading to
i.e.:
[ 7347.119911] XFS (sdb2): Access to block zero in inode 132 start_block: 0 start_off: 0 blkcnt: 0 extent-state: 0 lastx: 1a05
[ 7347.119911]
[ 7347.119919] XFS (sdb2): Access to block zero in inode 132 start_block: 0 start_off: 0 blkcnt: 0 extent-state: 0 lastx: 1a05
[ 7347.119919]
Fix them all.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
This patch adds the missing call to list_lru_destroy (spotted by Li Zhong)
and moves the deletion to after the shrinker is unregistered, as correctly
spotted by Dave
Signed-off-by: Glauber Costa <glommer@openvz.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We currently use a compile-time constant to size the node array for the
list_lru structure. Due to this, we don't need to allocate any memory at
initialization time. But as a consequence, the structures that contain
embedded list_lru lists can become way too big (the superblock for
instance contains two of them).
This patch aims at ameliorating this situation by dynamically allocating
the node arrays with the firmware provided nr_node_ids.
Signed-off-by: Glauber Costa <glommer@openvz.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In converting the buffer lru lists to use the generic code, the locking
for marking the buffers as on the dispose list was lost. This results in
confusion in LRU buffer tracking and acocunting, resulting in reference
counts being mucked up and filesystem beig unmountable.
To fix this, introduce an internal buffer spinlock to protect the state
field that holds the dispose list information. Because there is now
locking needed around xfs_buf_lru_add/del, and they are used in exactly
one place each two lines apart, get rid of the wrappers and code the logic
directly in place.
Further, the LRU emptying code used on unmount is less than optimal.
Convert it to use a dispose list as per a normal shrinker walk, and repeat
the walk that fills the dispose list until the LRU is empty. Thi avoids
needing to drop and regain the LRU lock for every item being freed, and
allows the same logic as the shrinker isolate call to be used. Simpler,
easier to understand.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Glauber Costa <glommer@openvz.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
fix warnings
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Glauber Costa <glommer@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Convert the buftarg LRU to use the new generic LRU list and take advantage
of the functionality it supplies to make the buffer cache shrinker node
aware.
Signed-off-by: Glauber Costa <glommer@openvz.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The transaction reservation size calculations is used by both kernel
and userspace, but most of the transaction code in xfs_trans.c is
kernel specific. Split all the transaction reservation code out into
it's own files to make sharing with userspace simpler. This just
leaves kernel-only definitions in xfs_trans.h, so it doesn't need to
be shared with userspace anymore, either.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Note: this changes the on-disk remote attribute format. I assert
that this is OK to do as CRCs are marked experimental and the first
kernel it is included in has not yet reached release yet. Further,
the userspace utilities are still evolving and so anyone using this
stuff right now is a developer or tester using volatile filesystems
for testing this feature. Hence changing the format right now to
save longer term pain is the right thing to do.
The fundamental change is to move from a header per extent in the
attribute to a header per filesytem block in the attribute. This
means there are more header blocks and the parsing of the attribute
data is slightly more complex, but it has the advantage that we
always know the size of the attribute on disk based on the length of
the data it contains.
This is where the header-per-extent method has problems. We don't
know the size of the attribute on disk without first knowing how
many extents are used to hold it. And we can't tell from a
mapping lookup, either, because remote attributes can be allocated
contiguously with other attribute blocks and so there is no obvious
way of determining the actual size of the atribute on disk short of
walking and mapping buffers.
The problem with this approach is that if we map a buffer
incorrectly (e.g. we make the last buffer for the attribute data too
long), we then get buffer cache lookup failure when we map it
correctly. i.e. we get a size mismatch on lookup. This is not
necessarily fatal, but it's a cache coherency problem that can lead
to returning the wrong data to userspace or writing the wrong data
to disk. And debug kernels will assert fail if this occurs.
I found lots of niggly little problems trying to fix this issue on a
4k block size filesystem, finally getting it to pass with lots of
fixes. The thing is, 1024 byte filesystems still failed, and it was
getting really complex handling all the corner cases that were
showing up. And there were clearly more that I hadn't found yet.
It is complex, fragile code, and if we don't fix it now, it will be
complex, fragile code forever more.
Hence the simple fix is to add a header to each filesystem block.
This gives us the same relationship between the attribute data
length and the number of blocks on disk as we have without CRCs -
it's a linear mapping and doesn't require us to guess anything. It
is simple to implement, too - the remote block count calculated at
lookup time can be used by the remote attribute set/get/remove code
without modification for both CRC and non-CRC filesystems. The world
becomes sane again.
Because the copy-in and copy-out now need to iterate over each
filesystem block, I moved them into helper functions so we separate
the block mapping and buffer manupulations from the attribute data
and CRC header manipulations. The code becomes much clearer as a
result, and it is a lot easier to understand and debug. It also
appears to be much more robust - once it worked on 4k block size
filesystems, it has worked without failure on 1k block size
filesystems, too.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit ad1858d777)
There are several places where we use KM_SLEEP allocation contexts
and use the fact that they are called from transaction context to
add KM_NOFS where appropriate. Unfortunately, there are several
places where the code makes this assumption but can be called from
outside transaction context but with filesystem locks held. These
places need explicit KM_NOFS annotations to avoid lockdep
complaining about reclaim contexts.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit ac14876cf9)
Failed buffer readahead can leave the buffer in the cache marked
with an error. Most callers that then issue a subsequent read on the
buffer do not zero the b_error field out, and so we may incorectly
detect an error during IO completion due to the stale error value
left on the buffer.
Avoid this problem by zeroing the error before IO submission. This
ensures that the only IO errors that are detected those captured
from are those captured from bio submission or completion.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
When we read a buffer, we might get an error from the underlying
block device and not the real data. Hence if we get an IO error, we
shouldn't run the verifier but instead just pass the IO error
straight through.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The trylock log force invoked via xfs_buf_item_push() can attempt
to acquire xa_lock, thus leading to a recursion bug when called
with xa_lock held.
This log force was originally added to xfs_buf_trylock() to address
xfsaild stalls due to pinned and stale buffers. Since the addition
of this behavior, the log item pushing code had been reworked to
detect and track pinned items to inform xfsaild to issue a log
force itself when necessary. As such, the log force on trylock
failure is redundant and safe to remove.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
When the new inode verify in xfs_iread() fails, the create
transaction is aborted and a shutdown occurs. The subsequent unmount
then hangs in xfs_wait_buftarg() on a buffer that has an elevated
hold count. Debug showed that it was an AGI buffer getting stuck:
[ 22.576147] XFS (vdb): buffer 0x2/0x1, hold 0x2 stuck
[ 22.976213] XFS (vdb): buffer 0x2/0x1, hold 0x2 stuck
[ 23.376206] XFS (vdb): buffer 0x2/0x1, hold 0x2 stuck
[ 23.776325] XFS (vdb): buffer 0x2/0x1, hold 0x2 stuck
The trace of this buffer leading up to the shutdown (trimmed for
brevity) looks like:
xfs_buf_init: bno 0x2 nblks 0x1 hold 1 caller xfs_buf_get_map
xfs_buf_get: bno 0x2 len 0x200 hold 1 caller xfs_buf_read_map
xfs_buf_read: bno 0x2 len 0x200 hold 1 caller xfs_trans_read_buf_map
xfs_buf_iorequest: bno 0x2 nblks 0x1 hold 1 caller _xfs_buf_read
xfs_buf_hold: bno 0x2 nblks 0x1 hold 1 caller xfs_buf_iorequest
xfs_buf_rele: bno 0x2 nblks 0x1 hold 2 caller xfs_buf_iorequest
xfs_buf_iowait: bno 0x2 nblks 0x1 hold 1 caller _xfs_buf_read
xfs_buf_ioerror: bno 0x2 len 0x200 hold 1 caller xfs_buf_bio_end_io
xfs_buf_iodone: bno 0x2 nblks 0x1 hold 1 caller _xfs_buf_ioend
xfs_buf_iowait_done: bno 0x2 nblks 0x1 hold 1 caller _xfs_buf_read
xfs_buf_hold: bno 0x2 nblks 0x1 hold 1 caller xfs_buf_item_init
xfs_trans_read_buf: bno 0x2 len 0x200 hold 2 recur 0 refcount 1
xfs_trans_brelse: bno 0x2 len 0x200 hold 2 recur 0 refcount 1
xfs_buf_item_relse: bno 0x2 nblks 0x1 hold 2 caller xfs_trans_brelse
xfs_buf_rele: bno 0x2 nblks 0x1 hold 2 caller xfs_buf_item_relse
xfs_buf_unlock: bno 0x2 nblks 0x1 hold 1 caller xfs_trans_brelse
xfs_buf_rele: bno 0x2 nblks 0x1 hold 1 caller xfs_trans_brelse
xfs_buf_trylock: bno 0x2 nblks 0x1 hold 2 caller _xfs_buf_find
xfs_buf_find: bno 0x2 len 0x200 hold 2 caller xfs_buf_get_map
xfs_buf_get: bno 0x2 len 0x200 hold 2 caller xfs_buf_read_map
xfs_buf_read: bno 0x2 len 0x200 hold 2 caller xfs_trans_read_buf_map
xfs_buf_hold: bno 0x2 nblks 0x1 hold 2 caller xfs_buf_item_init
xfs_trans_read_buf: bno 0x2 len 0x200 hold 3 recur 0 refcount 1
xfs_trans_log_buf: bno 0x2 len 0x200 hold 3 recur 0 refcount 1
xfs_buf_item_unlock: bno 0x2 len 0x200 hold 3 flags DIRTY liflags ABORTED
xfs_buf_unlock: bno 0x2 nblks 0x1 hold 3 caller xfs_buf_item_unlock
xfs_buf_rele: bno 0x2 nblks 0x1 hold 3 caller xfs_buf_item_unlock
And that is the AGI buffer from cold cache read into memory to
transaction abort. You can see at transaction abort the bli is dirty
and only has a single reference. The item is not pinned, and it's
not in the AIL. Hence the only reference to it is this transaction.
The problem is that the xfs_buf_item_unlock() call is dropping the
last reference to the xfs_buf_log_item attached to the buffer (which
holds a reference to the buffer), but it is not freeing the
xfs_buf_log_item. Hence nothing will ever release the buffer, and
the unmount hangs waiting for this reference to go away.
The fix is simple - xfs_buf_item_unlock needs to detect the last
reference going away in this case and free the xfs_buf_log_item to
release the reference it holds on the buffer.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
When _xfs_buf_find is passed an out of range address, it will fail
to find a relevant struct xfs_perag and oops with a null
dereference. This can happen when trying to walk a filesystem with a
metadata inode that has a partially corrupted extent map (i.e. the
block number returned is corrupt, but is otherwise intact) and we
try to read from the corrupted block address.
In this case, just fail the lookup. If it is readahead being issued,
it will simply not be done, but if it is real read that fails we
will get an error being reported. Ideally this case should result
in an EFSCORRUPTED error being reported, but we cannot return an
error through xfs_buf_read() or xfs_buf_get() so this lookup failure
may result in ENOMEM or EIO errors being reported instead.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Commits starting at 77c1a08 introduced a multiple segment support
to xfs_buf. xfs_trans_buf_item_match() could not find a multi-segment
buffer in the transaction because it was looking at the single segment
block number rather than the multi-segment b_maps[0].bm.bn. This
results on a recursive buffer lock that can never be satisfied.
This patch:
1) Changed the remaining b_map accesses to be b_maps[0] accesses.
2) Renames the single segment b_map structure to __b_map to avoid
future confusion.
Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
To separate the verifiers from iodone functions and associate read
and write verifiers at the same time, introduce a buffer verifier
operations structure to the xfs_buf.
This avoids the need for assigning the write verifier, clearing the
iodone function and re-running ioend processing in the read
verifier, and gets rid of the nasty "b_pre_io" name for the write
verifier function pointer. If we ever need to, it will also be
easier to add further content specific callbacks to a buffer with an
ops structure in place.
We also avoid needing to export verifier functions, instead we
can simply export the ops structures for those that are needed
outside the function they are defined in.
This patch also fixes a directory block readahead verifier issue
it exposed.
This patch also adds ops callbacks to the inode/alloc btree blocks
initialised by growfs. These will need more work before they will
work with CRCs.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Add a callback to the buffer write path to enable verification of
the buffer and CRC calculation prior to issuing the write to the
underlying storage.
If the callback function detects some kind of failure or error
condition, it must mark the buffer with an error so that the caller
can take appropriate action. In the case of xfs_buf_ioapply(), a
corrupt metadta buffer willt rigger a shutdown of the filesystem,
because something is clearly wrong and we can't allow corrupt
metadata to be written to disk.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
With verification being done as an IO completion callback, different
errors can be returned from a read. Uncached reads only return a
buffer or NULL on failure, which means the verification error cannot
be returned to the caller.
Split the error handling for these reads into two - a failure to get
a buffer will still return NULL, but a read error will return a
referenced buffer with b_error set rather than NULL. The caller is
responsible for checking the error state of the buffer returned.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Phil White <pwhite@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Add a verifier function callback capability to the buffer read
interfaces. This will be used by the callers to supply a function
that verifies the contents of the buffer when it is read from disk.
This patch does not provide callback functions, but simply modifies
the interfaces to allow them to be called.
The reason for adding this to the read interfaces is that it is very
difficult to tell fom the outside is a buffer was just read from
disk or whether we just pulled it out of cache. Supplying a callbck
allows the buffer cache to use it's internal knowledge of the buffer
to execute it only when the buffer is read from disk.
It is intended that the verifier functions will mark the buffer with
an EFSCORRUPTED error when verification fails. This allows the
reading context to distinguish a verification error from an IO
error, and potentially take further actions on the buffer (e.g.
attempt repair) based on the error reported.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Phil White <pwhite@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Error handling in xfs_buf_ioapply_map() does not handle IO reference
counts correctly. We increment the b_io_remaining count before
building the bio, but then fail to decrement it in the failure case.
This leads to the buffer never running IO completion and releasing
the reference that the IO holds, so at unmount we can leak the
buffer. This leak is captured by this assert failure during unmount:
XFS: Assertion failed: atomic_read(&pag->pag_ref) == 0, file: fs/xfs/xfs_mount.c, line: 273
This is not a new bug - the b_io_remaining accounting has had this
problem for a long, long time - it's just very hard to get a
zero length bio being built by this code...
Further, the buffer IO error can be overwritten on a multi-segment
buffer by subsequent bio completions for partial sections of the
buffer. Hence we should only set the buffer error status if the
buffer is not already carrying an error status. This ensures that a
partial IO error on a multi-segment buffer will not be lost. This
part of the problem is a regression, however.
cc: <stable@vger.kernel.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
While xfs_buftarg_shrink() is freeing buffers from the dispose list (filled with
buffers from lru list), there is a possibility to have xfs_buf_stale() racing
with it, and removing buffers from dispose list before xfs_buftarg_shrink() does
it.
This happens because xfs_buftarg_shrink() handle the dispose list without
locking and the test condition in xfs_buf_stale() checks for the buffer being in
*any* list:
if (!list_empty(&bp->b_lru))
If the buffer happens to be on dispose list, this causes the buffer counter of
lru list (btp->bt_lru_nr) to be decremented twice (once in xfs_buftarg_shrink()
and another in xfs_buf_stale()) causing a wrong account usage of the lru list.
This may cause xfs_buftarg_shrink() to return a wrong value to the memory
shrinker shrink_slab(), and such account error may also cause an underflowed
value to be returned; since the counter is lower than the current number of
items in the lru list, a decrement may happen when the counter is 0, causing
an underflow on the counter.
The fix uses a new flag field (and a new buffer flag) to serialize buffer
handling during the shrink process. The new flag field has been designed to use
btp->bt_lru_lock/unlock instead of xfs_buf_lock/unlock mechanism.
dchinner, sandeen, aquini and aris also deserve credits for this.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
xfs_bdstrat_cb only adds a check for a shutdown filesystem over
xfs_buf_iorequest, but xfs_buf_iodone_callbacks just checked for a shut down
filesystem a little earlier. In addition the shutdown handling in
xfs_bdstrat_cb is not very suitable for this caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
If the b_iodone handler is run in calling context in xfs_buf_iorequest we
can run into a recursion where xfs_buf_iodone_callbacks keeps calling back
into xfs_buf_iorequest because an I/O error happened, which keeps calling
back into xfs_buf_iorequest. This chain will usually not take long
because the filesystem gets shut down because of log I/O errors, but even
over a short time it can cause stack overflows if run on the same context.
As a short term workaround make sure we always call the iodone handler in
workqueue context.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
With the internal interfaces supporting discontiguous buffer maps,
add external lookup, read and get interfaces so they can start to be
used.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
While the external interface currently uses separate blockno/length
variables, we need to move internal interfaces to passing and
parsing vector maps. This will then allow us to add external
interfaces to support discontiguous buffer maps as the internal code
will already support them.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
To support discontiguous buffers in the buffer cache, we need to
separate the cache index variables from the I/O map. While this is
currently a 1:1 mapping, discontiguous buffer support will break
this relationship.
However, for caching purposes, we can still treat them the same as a
contiguous buffer - the block number of the first block and the
length of the buffer - as that is still a unique representation.
Also, the only way we will ever access the discontiguous regions of
buffers is via bulding the complete buffer in the first place, so
using the initial block number and entire buffer length is a sane
way to index the buffers.
Add a block mapping vector construct to the xfs_buf and use it in
the places where we are doing IO instead of the current
b_bn/b_length variables.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Commit de1cbee which removed b_file_offset in favor of b_bn introduced a bug
causing xfs_buf_allocate_memory() to overestimate the number of necessary
pages. The problem is that xfs_buf_alloc() sets b_bn to -1 and thus effectively
every buffer is straddling a page boundary which causes
xfs_buf_allocate_memory() to allocate two pages and use vmalloc() for access
which is unnecessary.
Dave says xfs_buf_alloc() doesn't need to set b_bn to -1 anymore since the
buffer is inserted into the cache only after being fully initialized now.
So just make xfs_buf_alloc() fill in proper block number from the beginning.
CC: David Chinner <dchinner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Rather than specifying XBF_MAPPED for almost all buffers, introduce
XBF_UNMAPPED for the couple of users that use unmapped buffers.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Recent event tracing during a debugging session showed that flags
that define the IO type for a buffer are leaking into the flags on
the buffer incorrectly. Fix the flag exclusion mask in
xfs_buf_alloc() to avoid problems that may be caused by such
leakage.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Untangle the header file includes a bit by moving the definition of
xfs_agino_t to xfs_types.h. This removes the dependency that xfs_ag.h has on
xfs_inum.h, meaning we don't need to include xfs_inum.h everywhere we include
xfs_ag.h.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Just about all callers of xfs_buf_read() and xfs_buf_get() use XBF_DONTBLOCK.
This is used to make memory allocation use GFP_NOFS rather than GFP_KERNEL to
avoid recursion through memory reclaim back into the filesystem.
All the blocking get calls in growfs occur inside a transaction, even though
they are no part of the transaction, so all allocation will be GFP_NOFS due to
the task flag PF_TRANS being set. The blocking read calls occur during log
recovery, so they will probably be unaffected by converting to GFP_NOFS
allocations.
Hence make XBF_DONTBLOCK behaviour always occur for buffers and kill the flag.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Buffers are always returned locked from the lookup routines. Hence
we don't need to tell the lookup routines to return locked buffers,
on to try and lock them. Remove XBF_LOCK from all the callers and
from internal buffer cache usage.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
xfs_buf_btoc and friends are simple macros that do basic block
to page index conversion and vice versa. These aren't widely used,
and we use open coded masking and shifting everywhere else. Hence
remove the macros and open code the work they do.
Also, use of PAGE_CACHE_{SIZE|SHIFT|MASK} for these macros is now
incorrect - we are using pages directly and not the page cache, so
use PAGE_{SIZE|MASK|SHIFT} instead.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Now that we pass block counts everywhere, and index buffers by block
number and length in units of blocks, convert the desired IO size
into block counts rather than bytes. Convert the code to use block
counts, and those that need byte counts get converted at the time of
use.
Rename the b_desired_count variable to something closer to it's
purpose - b_io_length - as it is only used to specify the length of
an IO for a subset of the buffer. The only time this is used is for
log IO - both writing iclogs and during log recovery. In all other
cases, the b_io_length matches b_length, and hence a lot of code
confuses the two. e.g. the buf item code uses the io count
exclusively when it should be using the buffer length. Fix these
apprpriately as they are found.
Also, remove the XFS_BUF_{SET_}COUNT() macros that are just wrappers
around the desired IO length. They only serve to make the code
shouty loud, don't actually add any real value, and are often used
incorrectly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Now that we pass block counts everywhere, and index buffers by block
number, track the length of the buffer in units of blocks rather
than bytes. Convert the code to use block counts, and those that
need byte counts get converted at the time of use.
Also, remove the XFS_BUF_{SET_}SIZE() macros that are just wrappers
around the buffer length. They only serve to make the code shouty
loud and don't actually add any real value.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Seeing as we pass block numbers around everywhere in the buffer
cache now, it makes no sense to index everything by byte offset.
Replace all the byte offset indexing with block number based
indexing, and replace all uses of the byte offset with direct
conversion from the block index.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The xfs_buf_get/read API is not consistent in the units it uses, and
does not use appropriate or consistent units/types for the
variables.
Convert the API to use disk addresses and block counts for all
buffer get and read calls. Use consistent naming for all the
functions and their declarations, and convert the internal functions
to use disk addresses and block counts to avoid need to convert them
from one type to another and back again.
Fix all the callers to use disk addresses and block counts. In many
cases, this removes an additional conversion from the function call
as the callers already have a block count.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
To replace the alloc/memset pair.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Because we no longer use the page cache for buffering, there is no
direct block number to page offset relationship anymore.
xfs_buf_get_pages is still setting up b_offset as if there was some
relationship, and that is leading to incorrectly setting up
*uncached* buffers that don't overwrite b_offset once they've had
pages allocated.
For cached buffers, the first block of the buffer is always at offset
zero into the allocated memory. This is true for sub-page sized
buffers, as well as for multiple-page buffers.
For uncached buffers, b_offset is only non-zero when we are
associating specific memory to the buffers, and that is set
correctly by the code setting up the buffer.
Hence remove the setting of b_offset in xfs_buf_get_pages, because
it is now always the wrong thing to do.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
If we call xfs_buf_iowait() on a buffer that failed dispatch due to
an IO error, it will wait forever for an Io that does not exist.
This is hndled in xfs_buf_read, but there is other code that calls
xfs_buf_iowait directly that doesn't.
Rather than make the call sites have to handle checking for dispatch
errors and then checking for completion errors, make
xfs_buf_iowait() check for dispatch errors on the buffer before
waiting. This means we handle both dispatch and completion errors
with one set of error handling at the caller sites.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
When memory allocation fails to add the page array or tht epages to
a buffer during xfs_buf_get(), the buffer is left in the cache in a
partially initialised state. There is enough state left for the next
lookup on that buffer to find the buffer, and for the buffer to then
be used without finishing the initialisation. As a result, when an
attempt to do IO on the buffer occurs, it fails with EIO because
there are no pages attached to the buffer.
We cannot remove the buffer from the cache immediately and free it,
because there may already be a racing lookup that is blocked on the
buffer lock. Hence the moment we unlock the buffer to then free it,
the other user is woken and we have a use-after-free situation.
To avoid this race condition altogether, allocate the pages for the
buffer before we insert it into the cache. This then means that we
don't have an allocation failure case to deal after the buffer is
already present in the cache, and hence avoid the problem
altogether. In most cases we won't have racing inserts for the same
buffer, and so won't increase the memory pressure allocation before
insertion may entail.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Queue delwri buffers on a local on-stack list instead of a per-buftarg one,
and write back the buffers per-process instead of by waking up xfsbufd.
This is now easily doable given that we have very few places left that write
delwri buffers:
- log recovery:
Only done at mount time, and already forcing out the buffers
synchronously using xfs_flush_buftarg
- quotacheck:
Same story.
- dquot reclaim:
Writes out dirty dquots on the LRU under memory pressure. We might
want to look into doing more of this via xfsaild, but it's already
more optimal than the synchronous inode reclaim that writes each
buffer synchronously.
- xfsaild:
This is the main beneficiary of the change. By keeping a local list
of buffers to write we reduce latency of writing out buffers, and
more importably we can remove all the delwri list promotions which
were hitting the buffer cache hard under sustained metadata loads.
The implementation is very straight forward - xfs_buf_delwri_queue now gets
a new list_head pointer that it adds the delwri buffers to, and all callers
need to eventually submit the list using xfs_buf_delwi_submit or
xfs_buf_delwi_submit_nowait. Buffers that already are on a delwri list are
skipped in xfs_buf_delwri_queue, assuming they already are on another delwri
list. The biggest change to pass down the buffer list was done to the AIL
pushing. Now that we operate on buffers the trylock, push and pushbuf log
item methods are merged into a single push routine, which tries to lock the
item, and if possible add the buffer that needs writeback to the buffer list.
This leads to much simpler code than the previous split but requires the
individual IOP_PUSH instances to unlock and reacquire the AIL around calls
to blocking routines.
Given that xfsailds now also handle writing out buffers, the conditions for
log forcing and the sleep times needed some small changes. The most
important one is that we consider an AIL busy as long we still have buffers
to push, and the other one is that we do increment the pushed LSN for
buffers that are under flushing at this moment, but still count them towards
the stuck items for restart purposes. Without this we could hammer on stuck
items without ever forcing the log and not make progress under heavy random
delete workloads on fast flash storage devices.
[ Dave Chinner:
- rebase on previous patches.
- improved comments for XBF_DELWRI_Q handling
- fix XBF_ASYNC handling in queue submission (test 106 failure)
- rename delwri submit function buffer list parameters for clarity
- xfs_efd_item_push() should return XFS_ITEM_PINNED ]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The new concurrency managed workqueues are cheap enough that we can create
per-filesystem instead of global workqueues. This allows us to remove the
trylock or defer scheme on the ilock, which is not helpful once we have
outstanding log reservations until finishing a size update.
Also allow the default concurrency on this workqueues so that I/O completions
blocking on the ilock for one inode do not block process for another inode.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits)
Kconfig: acpi: Fix typo in comment.
misc latin1 to utf8 conversions
devres: Fix a typo in devm_kfree comment
btrfs: free-space-cache.c: remove extra semicolon.
fat: Spelling s/obsolate/obsolete/g
SCSI, pmcraid: Fix spelling error in a pmcraid_err() call
tools/power turbostat: update fields in manpage
mac80211: drop spelling fix
types.h: fix comment spelling for 'architectures'
typo fixes: aera -> area, exntension -> extension
devices.txt: Fix typo of 'VMware'.
sis900: Fix enum typo 'sis900_rx_bufer_status'
decompress_bunzip2: remove invalid vi modeline
treewide: Fix comment and string typo 'bufer'
hyper-v: Update MAINTAINERS
treewide: Fix typos in various parts of the kernel, and fix some comments.
clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR
gpio: Kconfig: drop unknown symbol 'CS5535_GPIO'
leds: Kconfig: Fix typo 'D2NET_V2'
sound: Kconfig: drop unknown symbol ARCH_CLPS7500
...
Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new
kconfig additions, close to removed commented-out old ones)
* 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits)
PM / Hibernate: Implement compat_ioctl for /dev/snapshot
PM / Freezer: fix return value of freezable_schedule_timeout_killable()
PM / shmobile: Allow the A4R domain to be turned off at run time
PM / input / touchscreen: Make st1232 use device PM QoS constraints
PM / QoS: Introduce dev_pm_qos_add_ancestor_request()
PM / shmobile: Remove the stay_on flag from SH7372's PM domains
PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume
PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode
PM: Drop generic_subsys_pm_ops
PM / Sleep: Remove forward-only callbacks from AMBA bus type
PM / Sleep: Remove forward-only callbacks from platform bus type
PM: Run the driver callback directly if the subsystem one is not there
PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers
PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412.
PM / Sleep: Merge internal functions in generic_ops.c
PM / Sleep: Simplify generic system suspend callbacks
PM / Hibernate: Remove deprecated hibernation snapshot ioctls
PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled()
ARM: S3C64XX: Implement basic power domain support
PM / shmobile: Use common always on power domain governor
...
Fix up trivial conflict in fs/xfs/xfs_buf.c due to removal of unused
XBT_FORCE_SLEEP bit
XBT_FORCE_SLEEP is no longer ever tested; it is only set
and cleared. Remove it.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
There is no reason to export two functions for entering the
refrigerator. Calling refrigerator() instead of try_to_freeze()
doesn't save anything noticeable or removes any race condition.
* Rename refrigerator() to __refrigerator() and make it return bool
indicating whether it scheduled out for freezing.
* Update try_to_freeze() to return bool and relay the return value of
__refrigerator() if freezing().
* Convert all refrigerator() users to try_to_freeze().
* Update documentation accordingly.
* While at it, add might_sleep() to try_to_freeze().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Samuel Ortiz <samuel@sortiz.org>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: Christoph Hellwig <hch@infradead.org>
When we call xfs_flush_buftarg (generally from sync or umount) it already
is too late to flush the data workqueues, as I/O completion is signalled
for them and we are thus already done with the data we would flush here.
There are places where flushing them might be useful, but the current
sync interface doesn't give us that opportunity.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
The calling convention that returns a pointer to a static buffer is
fairly nasty, so just opencode it in the only caller that is left.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Instead of passing the block number and mount structure explicitly
get them off the bp and fix make the argument order more natural.
Also move it to xfs_buf.c and stop printing the device name given
that we already get the fs name as part of xfs_alert, and we know
what device is operates on because of the caller that gets printed,
finally rename it to xfs_buf_ioerror_alert and pass __func__ as
argument where it makes sense.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Change _xfs_buf_initialize to allocate the buffer directly and rename it to
xfs_buf_alloc now that is the only buffer allocation routine. Also remove
the xfs_buf_deallocate wrapper around the kmem_zone_free calls for buffers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
For each call to xfs_buf_stale we call xfs_buf_delwri_dequeue either
directly before or after it, or are guaranteed by the surrounding
conditionals that we are never called on delwri buffers. Simply
this situation by moving the call to xfs_buf_delwri_dequeue into
xfs_buf_stale.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
The code is unused and under a config option that doesn't exist, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Stats show that for an 8-way unlink @ ~80,000 unlinks/s we are doing
~1 million cache hit lookups to ~3000 buffer creates. That's almost
3 orders of magnitude more cahce hits than misses, so optimising for
cache hits is quite important. In the cache hit case, we do not need
to allocate a new buffer in case of a cache miss, so we are
effectively hitting the allocator for no good reason for vast the
majority of calls to _xfs_buf_find. 8-way create workloads are
showing similar cache hit/miss ratios.
The result is profiles that look like this:
samples pcnt function DSO
_______ _____ _______________________________ _________________
1036.00 10.0% _xfs_buf_find [kernel.kallsyms]
582.00 5.6% kmem_cache_alloc [kernel.kallsyms]
519.00 5.0% __memcpy [kernel.kallsyms]
468.00 4.5% __ticket_spin_lock [kernel.kallsyms]
388.00 3.7% kmem_cache_free [kernel.kallsyms]
331.00 3.2% xfs_log_commit_cil [kernel.kallsyms]
Further, there is a fair bit of work involved in initialising a new
buffer once a cache miss has occurred and we currently do that under
the rbtree spinlock. That increases spinlock hold time on what are
heavily used trees.
To fix this, remove the initialisation of the buffer from
_xfs_buf_find() and only allocate the new buffer once we've had a
cache miss. Initialise the buffer immediately after allocating it in
xfs_buf_get, too, so that is it ready for insert if we get another
cache miss after allocation. This minimises lock hold time and
avoids unnecessary allocator churn. The resulting profiles look
like:
samples pcnt function DSO
_______ _____ ___________________________ _________________
8111.00 9.1% _xfs_buf_find [kernel.kallsyms]
4380.00 4.9% __memcpy [kernel.kallsyms]
4341.00 4.8% __ticket_spin_lock [kernel.kallsyms]
3401.00 3.8% kmem_cache_alloc [kernel.kallsyms]
2856.00 3.2% xfs_log_commit_cil [kernel.kallsyms]
2625.00 2.9% __kmalloc [kernel.kallsyms]
2380.00 2.7% kfree [kernel.kallsyms]
2016.00 2.3% kmem_cache_free [kernel.kallsyms]
Showing a significant reduction in time spent doing allocation and
freeing from slabs (kmem_cache_alloc and kmem_cache_free).
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Fix the incorrect comment in the header of the function
_xfs_buf_find().
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
And also remove the strange local lock and delwri list pointers in a few
functions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Remove the xfs_buf_relse from xfs_bwrite and let the caller handle it to
mirror the delwri and read paths.
Also remove the mount pointer passed to xfs_bwrite, which is superflous now
that we have a mount pointer in the buftarg.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Unify the ways we add buffers to the delwri queue by always calling
xfs_buf_delwri_queue directly. The xfs_bdwrite functions is removed and
opencoded in its callers, and the two places setting XBF_DELWRI while a
buffer is locked and expecting xfs_buf_unlock to pick it up are converted
to call xfs_buf_delwri_queue directly, too. Also replace the
XFS_BUF_UNDELAYWRITE macro with direct calls to xfs_buf_delwri_dequeue
to make the explicit queuing/dequeuing more obvious.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Do not transfer a reference held by the caller to the buffer on the list,
or decrement it in xfs_buf_delwri_queue, but instead grab a new reference
if needed, and let the caller drop its own reference. Also move setting
of the XBF_DELWRI and XBF_ASYNC flags into xfs_buf_delwri_queue, and
only do it if needed. Note that for now xfs_buf_unlock already has
XBF_DELWRI, but that will change in the following patches.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
We can just unlock the buffer in the caller, and the decrement of b_hold
would also be needed in the !unlock, we just never hit that case currently
given that the caller handles that case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
We cannot ever reach xfs_buf_iorequest for a buffer with XBF_DELWRI set,
given that all write handlers make sure that the buffer is remove from
the delwri queue before, and we never do reads with the XBF_DELWRI flag
set (which the code would not handle correctly anyway).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Use the move from Linux 2.6 to Linux 3.x as an excuse to kill the
annoying subdirectories in the XFS source code. Besides the large
amount of file rename the only changes are to the Makefile, a few
files including headers with the subdirectory prefix, and the binary
sysctl compat code that includes a header under fs/xfs/ from
kernel/.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Jan Kara