Every now and then I see fstests failures on aarch64 (64k pages) that
trigger on the following sequence:
mkfs.xfs $dev
mount $dev $mnt
touch $mnt/a
umount $mnt
xfs_db -c 'path /a' -c 'print' $dev
99% of the time this succeeds, but every now and then xfs_db cannot find
/a and fails. This turns out to be a race involving udev/blkid, the
page cache for the block device, and the xfs_db process.
udev is triggered whenever anyone closes a block device or unmounts it.
The default udev rules invoke blkid to read the fs super and create
symlinks to the bdev under /dev/disk. For this, it uses buffered reads
through the page cache.
xfs_db also uses buffered reads to examine metadata. There is no
coordination between xfs_db and udev, which means that they can run
concurrently. Note there is no coordination between the kernel and
blkid either.
On a system with 64k pages, the page cache can cache the superblock and
the root inode (and hence the root dir) with the same 64k page. If
udev spawns blkid after the mkfs and the system is busy enough that it
is still running when xfs_db starts up, they'll both read from the same
page in the pagecache.
The unmount writes updated inode metadata to disk directly. The XFS
buffer cache does not use the bdev pagecache, nor does it invalidate the
pagecache on umount. If the above scenario occurs, the pagecache no
longer reflects what's on disk, xfs_db reads the stale metadata, and
fails to find /a. Most of the time this succeeds because closing a bdev
invalidates the page cache, but when processes race, everyone loses.
Fix the problem by invalidating the bdev pagecache after flushing the
bdev, so that xfs_db will see up to date metadata.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve latency
and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYuravgAKCRDdBJ7gKXxA
jpqSAQDrXSdII+ht9kSHlaCVYjqRFQz/rRvURQrWQV74f6aeiAD+NHHeDPwZn11/
SPktqEUrF1pxnGQxqLh1kUFUhsVZQgE=
=w/UH
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Most of the MM queue. A few things are still pending.
Liam's maple tree rework didn't make it. This has resulted in a few
other minor patch series being held over for next time.
Multi-gen LRU still isn't merged as we were waiting for mapletree to
stabilize. The current plan is to merge MGLRU into -mm soon and to
later reintroduce mapletree, with a view to hopefully getting both
into 6.1-rc1.
Summary:
- The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve
latency and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place"
[ XFS merge from hell as per Darrick Wong in
https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ]
* tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits)
tools/testing/selftests/vm/hmm-tests.c: fix build
mm: Kconfig: fix typo
mm: memory-failure: convert to pr_fmt()
mm: use is_zone_movable_page() helper
hugetlbfs: fix inaccurate comment in hugetlbfs_statfs()
hugetlbfs: cleanup some comments in inode.c
hugetlbfs: remove unneeded header file
hugetlbfs: remove unneeded hugetlbfs_ops forward declaration
hugetlbfs: use helper macro SZ_1{K,M}
mm: cleanup is_highmem()
mm/hmm: add a test for cross device private faults
selftests: add soft-dirty into run_vmtests.sh
selftests: soft-dirty: add test for mprotect
mm/mprotect: fix soft-dirty check in can_change_pte_writable()
mm: memcontrol: fix potential oom_lock recursion deadlock
mm/gup.c: fix formatting in check_and_migrate_movable_page()
xfs: fail dax mount if reflink is enabled on a partition
mm/memcontrol.c: remove the redundant updating of stats_flush_threshold
userfaultfd: don't fail on unrecognized features
hugetlb_cgroup: fix wrong hugetlb cgroup numa stat
...
- Improve scalability of the XFS log by removing spinlocks and global
synchronization points.
- Add security labels to whiteout inodes to match the other filesystems.
- Clean up per-ag pointer passing to simplify call sites.
- Reduce verifier overhead by precalculating more AG geometry.
- Implement fast-path lockless lookups in the buffer cache to reduce
spinlock hammering.
- Make attr forks a permanent part of the inode structure to fix a UAF
bug and because most files these days tend to have security labels and
soon will have parent pointers too.
- Clean up XFS_IFORK_Q usage and give it a better name.
- Fix more UAF bugs in the xattr code.
- SOB my tags.
- Fix some typos in the timestamp range documentation.
- Fix a few more memory leaks.
- Code cleanups and typo fixes.
- Fix an unlocked inode fork pointer access in getbmap.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----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=fNjj
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.20-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"The biggest changes for this release are the log scalability
improvements, lockless lookups for the buffer cache, and making the
attr fork a permanent part of the incore inode in preparation for
directory parent pointers.
There's also a bunch of bug fixes that have accumulated since -rc5. I
might send you a second pull request with some more bug fixes that I'm
still working on.
Once the merge window ends, I will hand maintainership back to Dave
Chinner until the 6.1-rc1 release so that I can conduct the design
review for the online fsck feature, and try to get it merged.
Summary:
- Improve scalability of the XFS log by removing spinlocks and global
synchronization points.
- Add security labels to whiteout inodes to match the other
filesystems.
- Clean up per-ag pointer passing to simplify call sites.
- Reduce verifier overhead by precalculating more AG geometry.
- Implement fast-path lockless lookups in the buffer cache to reduce
spinlock hammering.
- Make attr forks a permanent part of the inode structure to fix a
UAF bug and because most files these days tend to have security
labels and soon will have parent pointers too.
- Clean up XFS_IFORK_Q usage and give it a better name.
- Fix more UAF bugs in the xattr code.
- SOB my tags.
- Fix some typos in the timestamp range documentation.
- Fix a few more memory leaks.
- Code cleanups and typo fixes.
- Fix an unlocked inode fork pointer access in getbmap"
* tag 'xfs-5.20-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (61 commits)
xfs: delete extra space and tab in blank line
xfs: fix NULL pointer dereference in xfs_getbmap()
xfs: Fix typo 'the the' in comment
xfs: Fix comment typo
xfs: don't leak memory when attr fork loading fails
xfs: fix for variable set but not used warning
xfs: xfs_buf cache destroy isn't RCU safe
xfs: delete unnecessary NULL checks
xfs: fix comment for start time value of inode with bigtime enabled
xfs: fix use-after-free in xattr node block inactivation
xfs: lockless buffer lookup
xfs: remove a superflous hash lookup when inserting new buffers
xfs: reduce the number of atomic when locking a buffer after lookup
xfs: merge xfs_buf_find() and xfs_buf_get_map()
xfs: break up xfs_buf_find() into individual pieces
xfs: add in-memory iunlink log item
xfs: add log item precommit operation
xfs: combine iunlink inode update functions
xfs: clean up xfs_iunlink_update_inode()
xfs: double link the unlinked inode list
...
Darrick and Sachin Sant reported that xfs/435 and xfs/436 would
report an non-empty xfs_buf slab on module remove. This isn't easily
to reproduce, but is clearly a side effect of converting the buffer
caceh to RUC freeing and lockless lookups. Sachin bisected and
Darrick hit it when testing the patchset directly.
Turns out that the xfs_buf slab is not destroyed when all the other
XFS slab caches are destroyed. Instead, it's got it's own little
wrapper function that gets called separately, and so it doesn't have
an rcu_barrier() call in it that is needed to drain all the rcu
callbacks before the slab is destroyed.
Fix it by removing the xfs_buf_init/terminate wrappers that just
allocate and destroy the xfs_buf slab, and move them to the same
place that all the other slab caches are set up and destroyed.
Reported-and-tested-by: Sachin Sant <sachinp@linux.ibm.com>
Fixes: 298f342245 ("xfs: lockless buffer lookup")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Introduce xfs_notify_failure.c to handle failure related works, such as
implement ->notify_failure(), register/unregister dax holder in xfs, and
so on.
If the rmap feature of XFS enabled, we can query it to find files and
metadata which are associated with the corrupt data. For now all we do is
kill processes with that file mapped into their address spaces, but future
patches could actually do something about corrupt metadata.
After that, the memory failure needs to notify the processes who are using
those files.
Link: https://lkml.kernel.org/r/20220603053738.1218681-7-ruansy.fnst@fujitsu.com
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.wiliams@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "v14 fsdax-rmap + v11 fsdax-reflink", v2.
The patchset fsdax-rmap is aimed to support shared pages tracking for
fsdax.
It moves owner tracking from dax_assocaite_entry() to pmem device driver,
by introducing an interface ->memory_failure() for struct pagemap. This
interface is called by memory_failure() in mm, and implemented by pmem
device.
Then call holder operations to find the filesystem which the corrupted
data located in, and call filesystem handler to track files or metadata
associated with this page.
Finally we are able to try to fix the corrupted data in filesystem and do
other necessary processing, such as killing processes who are using the
files affected.
The call trace is like this:
memory_failure()
|* fsdax case
|------------
|pgmap->ops->memory_failure() => pmem_pgmap_memory_failure()
| dax_holder_notify_failure() =>
| dax_device->holder_ops->notify_failure() =>
| - xfs_dax_notify_failure()
| |* xfs_dax_notify_failure()
| |--------------------------
| | xfs_rmap_query_range()
| | xfs_dax_failure_fn()
| | * corrupted on metadata
| | try to recover data, call xfs_force_shutdown()
| | * corrupted on file data
| | try to recover data, call mf_dax_kill_procs()
|* normal case
|-------------
|mf_generic_kill_procs()
The patchset fsdax-reflink attempts to add CoW support for fsdax, and
takes XFS, which has both reflink and fsdax features, as an example.
One of the key mechanisms needed to be implemented in fsdax is CoW. Copy
the data from srcmap before we actually write data to the destination
iomap. And we just copy range in which data won't be changed.
Another mechanism is range comparison. In page cache case, readpage() is
used to load data on disk to page cache in order to be able to compare
data. In fsdax case, readpage() does not work. So, we need another
compare data with direct access support.
With the two mechanisms implemented in fsdax, we are able to make reflink
and fsdax work together in XFS.
This patch (of 14):
To easily track filesystem from a pmem device, we introduce a holder for
dax_device structure, and also its operation. This holder is used to
remember who is using this dax_device:
- When it is the backend of a filesystem, the holder will be the
instance of this filesystem.
- When this pmem device is one of the targets in a mapped device, the
holder will be this mapped device. In this case, the mapped device
has its own dax_device and it will follow the first rule. So that we
can finally track to the filesystem we needed.
The holder and holder_ops will be set when filesystem is being mounted,
or an target device is being activated.
Link: https://lkml.kernel.org/r/20220603053738.1218681-1-ruansy.fnst@fujitsu.com
Link: https://lkml.kernel.org/r/20220603053738.1218681-2-ruansy.fnst@fujitsu.com
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.wiliams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for the
combination of a request operation with request flags.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-63-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that we have a standalone fast path for buffer lookup, we can
easily convert it to use rcu lookups. When we continually hammer the
buffer cache with trylock lookups, we end up with a huge amount of
lock contention on the per-ag buffer hash locks:
- 92.71% 0.05% [kernel] [k] xfs_inodegc_worker
- 92.67% xfs_inodegc_worker
- 92.13% xfs_inode_unlink
- 91.52% xfs_inactive_ifree
- 85.63% xfs_read_agi
- 85.61% xfs_trans_read_buf_map
- 85.59% xfs_buf_read_map
- xfs_buf_get_map
- 85.55% xfs_buf_find
- 72.87% _raw_spin_lock
- do_raw_spin_lock
71.86% __pv_queued_spin_lock_slowpath
- 8.74% xfs_buf_rele
- 7.88% _raw_spin_lock
- 7.88% do_raw_spin_lock
7.63% __pv_queued_spin_lock_slowpath
- 1.70% xfs_buf_trylock
- 1.68% down_trylock
- 1.41% _raw_spin_lock_irqsave
- 1.39% do_raw_spin_lock
__pv_queued_spin_lock_slowpath
- 0.76% _raw_spin_unlock
0.75% do_raw_spin_unlock
This is basically hammering the pag->pag_buf_lock from lots of CPUs
doing trylocks at the same time. Most of the buffer trylock
operations ultimately fail after we've done the lookup, so we're
really hammering the buf hash lock whilst making no progress.
We can also see significant spinlock traffic on the same lock just
under normal operation when lots of tasks are accessing metadata
from the same AG, so let's avoid all this by converting the lookup
fast path to leverages the rhashtable's ability to do rcu protected
lookups.
We avoid races with the buffer release path by using
atomic_inc_not_zero() on the buffer hold count. Any buffer that is
in the LRU will have a non-zero count, thereby allowing the lockless
fast path to be taken in most cache hit situations. If the buffer
hold count is zero, then it is likely going through the release path
so in that case we fall back to the existing lookup miss slow path.
The slow path will then do an atomic lookup and insert under the
buffer hash lock and hence serialise correctly against buffer
release freeing the buffer.
The use of rcu protected lookups means that buffer handles now need
to be freed by RCU callbacks (same as inodes). We still free the
buffer pages before the RCU callback - we won't be trying to access
them at all on a buffer that has zero references - but we need the
buffer handle itself to be present for the entire rcu protected read
side to detect a zero hold count correctly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Currently on the slow path insert we repeat the initial hash table
lookup before we attempt the insert, resulting in a two traversals
of the hash table to ensure the insert is valid. The rhashtable API
provides a method for an atomic lookup and insert operation, so we
can avoid one of the hash table traversals by using this method.
Adapted from a large patch containing this optimisation by Christoph
Hellwig.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Avoid an extra atomic operation in the non-trylock case by only
doing a trylock if the XBF_TRYLOCK flag is set. This follows the
pattern in the IO path with NOWAIT semantics where the
"trylock-fail-lock" path showed 5-10% reduced throughput compared to
just using single lock call when not under NOWAIT conditions. So
make that same change here, too.
See commit 942491c9e6 ("xfs: fix AIM7 regression") for details.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
[hch: split from a larger patch]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Now that we factored xfs_buf_find(), we can start separating into
distinct fast and slow paths from xfs_buf_get_map(). We start by
moving the lookup map and perag setup to _get_map(), and then move
all the specifics of the fast path lookup into xfs_buf_lookup()
and call it directly from _get_map(). We the move all the slow path
code to xfs_buf_find_insert(), which is now also called directly
from _get_map(). As such, xfs_buf_find() now goes away.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
xfs_buf_find() is made up of three main parts: lookup, insert and
locking. The interactions with xfs_buf_get_map() require it to be
called twice - once for a pure lookup, and again on lookup failure
so the insert path can be run. We want to simplify this down a lot,
so split it into a fast path lookup, a slow path insert and a "lock
the found buffer" helper. This will then let us integrate these
operations more effectively into xfs_buf_get_map() in future
patches.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Make it consistent with the other buffer APIs to return a error and
the buffer is placed in a parameter.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Currently shrinkers are anonymous objects. For debugging purposes they
can be identified by count/scan function names, but it's not always
useful: e.g. for superblock's shrinkers it's nice to have at least an
idea of to which superblock the shrinker belongs.
This commit adds names to shrinkers. register_shrinker() and
prealloc_shrinker() functions are extended to take a format and arguments
to master a name.
In some cases it's not possible to determine a good name at the time when
a shrinker is allocated. For such cases shrinker_debugfs_rename() is
provided.
The expected format is:
<subsystem>-<shrinker_type>[:<instance>]-<id>
For some shrinkers an instance can be encoded as (MAJOR:MINOR) pair.
After this change the shrinker debugfs directory looks like:
$ cd /sys/kernel/debug/shrinker/
$ ls
dquota-cache-16 sb-devpts-28 sb-proc-47 sb-tmpfs-42
mm-shadow-18 sb-devtmpfs-5 sb-proc-48 sb-tmpfs-43
mm-zspool:zram0-34 sb-hugetlbfs-17 sb-pstore-31 sb-tmpfs-44
rcu-kfree-0 sb-hugetlbfs-33 sb-rootfs-2 sb-tmpfs-49
sb-aio-20 sb-iomem-12 sb-securityfs-6 sb-tracefs-13
sb-anon_inodefs-15 sb-mqueue-21 sb-selinuxfs-22 sb-xfs:vda1-36
sb-bdev-3 sb-nsfs-4 sb-sockfs-8 sb-zsmalloc-19
sb-bpf-32 sb-pipefs-14 sb-sysfs-26 thp-deferred_split-10
sb-btrfs:vda2-24 sb-proc-25 sb-tmpfs-1 thp-zero-9
sb-cgroup2-30 sb-proc-39 sb-tmpfs-27 xfs-buf:vda1-37
sb-configfs-23 sb-proc-41 sb-tmpfs-29 xfs-inodegc:vda1-38
sb-dax-11 sb-proc-45 sb-tmpfs-35
sb-debugfs-7 sb-proc-46 sb-tmpfs-40
[roman.gushchin@linux.dev: fix build warnings]
Link: https://lkml.kernel.org/r/Yr+ZTnLb9lJk6fJO@castle
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lkml.kernel.org/r/20220601032227.4076670-4-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned
fields to be unsigned. This manifests as a compiler error such as:
/kisskb/src/fs/xfs/./xfs_trace.h:432:2: note: in expansion of macro 'TP_printk'
TP_printk("dev %d:%d daddr 0x%llx bbcount 0x%x hold %d pincount %d "
^
/kisskb/src/fs/xfs/./xfs_trace.h:440:5: note: in expansion of macro '__print_flags'
__print_flags(__entry->flags, "|", XFS_BUF_FLAGS),
^
/kisskb/src/fs/xfs/xfs_buf.h:67:4: note: in expansion of macro 'XBF_UNMAPPED'
{ XBF_UNMAPPED, "UNMAPPED" }
^
/kisskb/src/fs/xfs/./xfs_trace.h:440:40: note: in expansion of macro 'XFS_BUF_FLAGS'
__print_flags(__entry->flags, "|", XFS_BUF_FLAGS),
^
/kisskb/src/fs/xfs/./xfs_trace.h: In function 'trace_raw_output_xfs_buf_flags_class':
/kisskb/src/fs/xfs/xfs_buf.h:46:23: error: initializer element is not constant
#define XBF_UNMAPPED (1 << 31)/* do not map the buffer */
as __print_flags assigns XFS_BUF_FLAGS to a structure that uses an
unsigned long for the flag. Since this results in the value of
XBF_UNMAPPED causing a signed integer overflow, the result is
technically undefined behavior, which gcc-5 does not accept as an
integer constant.
This is based on a patch from Arnd Bergman <arnd@arndb.de>.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
- Fix some incorrect mapping state being passed to iomap during COW
- Don't create bogus selinux audit messages when deciding to degrade
gracefully due to lack of privilege
- Fix setattr implementation to use VFS helpers so that we drop setgid
consistently with the other filesystems
- Fix link/unlink/rename to check quota limits
- Constify xfs_name_dotdot to prevent abuse of in-kernel symbols
- Fix log livelock between the AIL and inodegc threads during recovery
- Fix a log stall when the AIL races with pushers
- Fix stalls in CIL flushes due to pinned inode cluster buffers during
recovery
- Fix log corruption due to incorrect usage of xfs_is_shutdown vs
xlog_is_shutdown because during an induced fs shutdown, AIL writeback
must continue until the log is shut down, even if the filesystem has
already shut down
-----BEGIN PGP SIGNATURE-----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=uHT0
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.18-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"The biggest change this cycle is bringing XFS' inode attribute setting
code back towards alignment with what the VFS does. IOWs, setgid bit
handling should be a closer match with ext4 and btrfs behavior.
The rest of the branch is bug fixes around the filesystem -- patching
gaps in quota enforcement, removing bogus selinux audit messages, and
fixing log corruption and problems with log recovery. There will be a
second pull request later on in the merge window with more bug fixes.
Dave Chinner will be taking over as XFS maintainer for one release
cycle, starting from the day 5.18-rc1 drops until 5.19-rc1 is tagged
so that I can focus on starting a massive design review for the
(feature complete after five years) online repair feature.
Summary:
- Fix some incorrect mapping state being passed to iomap during COW
- Don't create bogus selinux audit messages when deciding to degrade
gracefully due to lack of privilege
- Fix setattr implementation to use VFS helpers so that we drop
setgid consistently with the other filesystems
- Fix link/unlink/rename to check quota limits
- Constify xfs_name_dotdot to prevent abuse of in-kernel symbols
- Fix log livelock between the AIL and inodegc threads during
recovery
- Fix a log stall when the AIL races with pushers
- Fix stalls in CIL flushes due to pinned inode cluster buffers
during recovery
- Fix log corruption due to incorrect usage of xfs_is_shutdown vs
xlog_is_shutdown because during an induced fs shutdown, AIL
writeback must continue until the log is shut down, even if the
filesystem has already shut down"
* tag 'xfs-5.18-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: xfs_is_shutdown vs xlog_is_shutdown cage fight
xfs: AIL should be log centric
xfs: log items should have a xlog pointer, not a mount
xfs: async CIL flushes need pending pushes to be made stable
xfs: xfs_ail_push_all_sync() stalls when racing with updates
xfs: check buffer pin state after locking in delwri_submit
xfs: log worker needs to start before intent/unlink recovery
xfs: constify xfs_name_dotdot
xfs: constify the name argument to various directory functions
xfs: reserve quota for target dir expansion when renaming files
xfs: reserve quota for dir expansion when linking/unlinking files
xfs: refactor user/group quota chown in xfs_setattr_nonsize
xfs: use setattr_copy to set vfs inode attributes
xfs: don't generate selinux audit messages for capability testing
xfs: add missing cmap->br_state = XFS_EXT_NORM update
These functions are no longer useful as no BDIs report congestions any
more.
Removing the test on bdi_write_contested() in current_may_throttle()
could cause a small change in behaviour, but only when PF_LOCAL_THROTTLE
is set.
So replace the calls by 'false' and simplify the code - and remove the
functions.
[akpm@linux-foundation.org: fix build]
Link: https://lkml.kernel.org/r/164549983742.9187.2570198746005819592.stgit@noble.brown
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> [nilfs]
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Paolo Valente <paolo.valente@linaro.org>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I've been chasing a recent resurgence in generic/388 recovery
failure and/or corruption events. The events have largely been
uninitialised inode chunks being tripped over in log recovery
such as:
XFS (pmem1): User initiated shutdown received.
pmem1: writeback error on inode 12621949, offset 1019904, sector 12968096
XFS (pmem1): Log I/O Error (0x6) detected at xfs_fs_goingdown+0xa3/0xf0 (fs/xfs/xfs_fsops.c:500). Shutting down filesystem.
XFS (pmem1): Please unmount the filesystem and rectify the problem(s)
XFS (pmem1): Unmounting Filesystem
XFS (pmem1): Mounting V5 Filesystem
XFS (pmem1): Starting recovery (logdev: internal)
XFS (pmem1): bad inode magic/vsn daddr 8723584 #0 (magic=1818)
XFS (pmem1): Metadata corruption detected at xfs_inode_buf_verify+0x180/0x190, xfs_inode block 0x851c80 xfs_inode_buf_verify
XFS (pmem1): Unmount and run xfs_repair
XFS (pmem1): First 128 bytes of corrupted metadata buffer:
00000000: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................
00000010: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................
00000020: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................
00000030: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................
00000040: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................
00000050: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................
00000060: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................
00000070: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................
XFS (pmem1): metadata I/O error in "xlog_recover_items_pass2+0x52/0xc0" at daddr 0x851c80 len 32 error 117
XFS (pmem1): log mount/recovery failed: error -117
XFS (pmem1): log mount failed
There have been isolated random other issues, too - xfs_repair fails
because it finds some corruption in symlink blocks, rmap
inconsistencies, etc - but they are nowhere near as common as the
uninitialised inode chunk failure.
The problem has clearly happened at runtime before recovery has run;
I can see the ICREATE log item in the log shortly before the
actively recovered range of the log. This means the ICREATE was
definitely created and written to the log, but for some reason the
tail of the log has been moved past the ordered buffer log item that
tracks INODE_ALLOC buffers and, supposedly, prevents the tail of the
log moving past the ICREATE log item before the inode chunk buffer
is written to disk.
Tracing the fsstress processes that are running when the filesystem
shut down immediately pin-pointed the problem:
user shutdown marks xfs_mount as shutdown
godown-213341 [008] 6398.022871: console: [ 6397.915392] XFS (pmem1): User initiated shutdown received.
.....
aild tries to push ordered inode cluster buffer
xfsaild/pmem1-213314 [001] 6398.022974: xfs_buf_trylock: dev 259:1 daddr 0x851c80 bbcount 0x20 hold 16 pincount 0 lock 0 flags DONE|INODES|PAGES caller xfs_inode_item_push+0x8e
xfsaild/pmem1-213314 [001] 6398.022976: xfs_ilock_nowait: dev 259:1 ino 0x851c80 flags ILOCK_SHARED caller xfs_iflush_cluster+0xae
xfs_iflush_cluster() checks xfs_is_shutdown(), returns true,
calls xfs_iflush_abort() to kill writeback of the inode.
Inode is removed from AIL, drops cluster buffer reference.
xfsaild/pmem1-213314 [001] 6398.022977: xfs_ail_delete: dev 259:1 lip 0xffff88880247ed80 old lsn 7/20344 new lsn 7/21000 type XFS_LI_INODE flags IN_AIL
xfsaild/pmem1-213314 [001] 6398.022978: xfs_buf_rele: dev 259:1 daddr 0x851c80 bbcount 0x20 hold 17 pincount 0 lock 0 flags DONE|INODES|PAGES caller xfs_iflush_abort+0xd7
.....
All inodes on cluster buffer are aborted, then the cluster buffer
itself is aborted and removed from the AIL *without writeback*:
xfsaild/pmem1-213314 [001] 6398.023011: xfs_buf_error_relse: dev 259:1 daddr 0x851c80 bbcount 0x20 hold 2 pincount 0 lock 0 flags ASYNC|DONE|STALE|INODES|PAGES caller xfs_buf_ioend_fail+0x33
xfsaild/pmem1-213314 [001] 6398.023012: xfs_ail_delete: dev 259:1 lip 0xffff8888053efde8 old lsn 7/20344 new lsn 7/20344 type XFS_LI_BUF flags IN_AIL
The inode buffer was at 7/20344 when it was removed from the AIL.
xfsaild/pmem1-213314 [001] 6398.023012: xfs_buf_item_relse: dev 259:1 daddr 0x851c80 bbcount 0x20 hold 2 pincount 0 lock 0 flags ASYNC|DONE|STALE|INODES|PAGES caller xfs_buf_item_done+0x31
xfsaild/pmem1-213314 [001] 6398.023012: xfs_buf_rele: dev 259:1 daddr 0x851c80 bbcount 0x20 hold 2 pincount 0 lock 0 flags ASYNC|DONE|STALE|INODES|PAGES caller xfs_buf_item_relse+0x39
.....
Userspace is still running, doing stuff. an fsstress process runs
syncfs() or sync() and we end up in sync_fs_one_sb() which issues
a log force. This pushes on the CIL:
fsstress-213322 [001] 6398.024430: xfs_fs_sync_fs: dev 259:1 m_features 0x20000000019ff6e9 opstate (clean|shutdown|inodegc|blockgc) s_flags 0x70810000 caller sync_fs_one_sb+0x26
fsstress-213322 [001] 6398.024430: xfs_log_force: dev 259:1 lsn 0x0 caller xfs_fs_sync_fs+0x82
fsstress-213322 [001] 6398.024430: xfs_log_force: dev 259:1 lsn 0x5f caller xfs_log_force+0x7c
<...>-194402 [001] 6398.024467: kmem_alloc: size 176 flags 0x14 caller xlog_cil_push_work+0x9f
And the CIL fills up iclogs with pending changes. This picks up
the current tail from the AIL:
<...>-194402 [001] 6398.024497: xlog_iclog_get_space: dev 259:1 state XLOG_STATE_ACTIVE refcnt 1 offset 0 lsn 0x0 flags caller xlog_write+0x149
<...>-194402 [001] 6398.024498: xlog_iclog_switch: dev 259:1 state XLOG_STATE_ACTIVE refcnt 1 offset 0 lsn 0x700005408 flags caller xlog_state_get_iclog_space+0x37e
<...>-194402 [001] 6398.024521: xlog_iclog_release: dev 259:1 state XLOG_STATE_WANT_SYNC refcnt 1 offset 32256 lsn 0x700005408 flags caller xlog_write+0x5f9
<...>-194402 [001] 6398.024522: xfs_log_assign_tail_lsn: dev 259:1 new tail lsn 7/21000, old lsn 7/20344, last sync 7/21448
And it moves the tail of the log to 7/21000 from 7/20344. This
*moves the tail of the log beyond the ICREATE transaction* that was
at 7/20344 and pinned by the inode cluster buffer that was cancelled
above.
....
godown-213341 [008] 6398.027005: xfs_force_shutdown: dev 259:1 tag logerror flags log_io|force_umount file fs/xfs/xfs_fsops.c line_num 500
godown-213341 [008] 6398.027022: console: [ 6397.915406] pmem1: writeback error on inode 12621949, offset 1019904, sector 12968096
godown-213341 [008] 6398.030551: console: [ 6397.919546] XFS (pmem1): Log I/O Error (0x6) detected at xfs_fs_goingdown+0xa3/0xf0 (fs/
And finally the log itself is now shutdown, stopping all further
writes to the log. But this is too late to prevent the corruption
that moving the tail of the log forwards after we start cancelling
writeback causes.
The fundamental problem here is that we are using the wrong shutdown
checks for log items. We've long conflated mount shutdown with log
shutdown state, and I started separating that recently with the
atomic shutdown state changes in commit b36d4651e1 ("xfs: make
forced shutdown processing atomic"). The changes in that commit
series are directly responsible for being able to diagnose this
issue because it clearly separated mount shutdown from log shutdown.
Essentially, once we start cancelling writeback of log items and
removing them from the AIL because the filesystem is shut down, we
*cannot* update the journal because we may have cancelled the items
that pin the tail of the log. That moves the tail of the log
forwards without having written the metadata back, hence we have
corrupt in memory state and writing to the journal propagates that
to the on-disk state.
What commit b36d4651e1 makes clear is that log item state needs to
change relative to log shutdown, not mount shutdown. IOWs, anything
that aborts metadata writeback needs to check log shutdown state
because log items directly affect log consistency. Having them check
mount shutdown state introduces the above race condition where we
cancel metadata writeback before the log shuts down.
To fix this, this patch works through all log items and converts
shutdown checks to use xlog_is_shutdown() rather than
xfs_is_shutdown(), so that we don't start aborting metadata
writeback before we shut off journal writes.
AFAICT, this race condition is a zero day IO error handling bug in
XFS that dates back to the introduction of XLOG_IO_ERROR,
XLOG_STATE_IOERROR and XFS_FORCED_SHUTDOWN back in January 1997.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
AIL flushing can get stuck here:
[316649.005769] INFO: task xfsaild/pmem1:324525 blocked for more than 123 seconds.
[316649.007807] Not tainted 5.17.0-rc6-dgc+ #975
[316649.009186] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[316649.011720] task:xfsaild/pmem1 state:D stack:14544 pid:324525 ppid: 2 flags:0x00004000
[316649.014112] Call Trace:
[316649.014841] <TASK>
[316649.015492] __schedule+0x30d/0x9e0
[316649.017745] schedule+0x55/0xd0
[316649.018681] io_schedule+0x4b/0x80
[316649.019683] xfs_buf_wait_unpin+0x9e/0xf0
[316649.021850] __xfs_buf_submit+0x14a/0x230
[316649.023033] xfs_buf_delwri_submit_buffers+0x107/0x280
[316649.024511] xfs_buf_delwri_submit_nowait+0x10/0x20
[316649.025931] xfsaild+0x27e/0x9d0
[316649.028283] kthread+0xf6/0x120
[316649.030602] ret_from_fork+0x1f/0x30
in the situation where flushing gets preempted between the unpin
check and the buffer trylock under nowait conditions:
blk_start_plug(&plug);
list_for_each_entry_safe(bp, n, buffer_list, b_list) {
if (!wait_list) {
if (xfs_buf_ispinned(bp)) {
pinned++;
continue;
}
Here >>>>>>
if (!xfs_buf_trylock(bp))
continue;
This means submission is stuck until something else triggers a log
force to unpin the buffer.
To get onto the delwri list to begin with, the buffer pin state has
already been checked, and hence it's relatively rare we get a race
between flushing and encountering a pinned buffer in delwri
submission to begin with. Further, to increase the pin count the
buffer has to be locked, so the only way we can hit this race
without failing the trylock is to be preempted between the pincount
check seeing zero and the trylock being run.
Hence to avoid this problem, just invert the order of trylock vs
pin check. We shouldn't hit that many pinned buffers here, so
optimising away the trylock for pinned buffers should not matter for
performance at all.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Pass the block_device and operation that we plan to use this bio for to
bio_alloc to optimize the assignment. NULL/0 can be passed, both for the
passthrough case on a raw request_queue and to temporarily avoid
refactoring some nasty code.
Also move the gfp_mask argument after the nr_vecs argument for a much
more logical calling convention matching what most of the kernel does.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220124091107.642561-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge misc updates from Andrew Morton:
"146 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak,
dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap,
memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb,
userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp,
ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and
damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (146 commits)
mm/damon: hide kernel pointer from tracepoint event
mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log
mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging
mm/damon/dbgfs: remove an unnecessary variable
mm/damon: move the implementation of damon_insert_region to damon.h
mm/damon: add access checking for hugetlb pages
Docs/admin-guide/mm/damon/usage: update for schemes statistics
mm/damon/dbgfs: support all DAMOS stats
Docs/admin-guide/mm/damon/reclaim: document statistics parameters
mm/damon/reclaim: provide reclamation statistics
mm/damon/schemes: account how many times quota limit has exceeded
mm/damon/schemes: account scheme actions that successfully applied
mm/damon: remove a mistakenly added comment for a future feature
Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts
Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning
Docs/admin-guide/mm/damon/usage: remove redundant information
Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks
mm/damon: convert macro functions to static inline functions
mm/damon: modify damon_rand() macro to static inline function
mm/damon: move damon_rand() definition into damon.h
...
Various places in the kernel - largely in filesystems - respond to a
memory allocation failure by looping around and re-trying. Some of
these cannot conveniently use __GFP_NOFAIL, for reasons such as:
- a GFP_ATOMIC allocation, which __GFP_NOFAIL doesn't work on
- a need to check for the process being signalled between failures
- the possibility that other recovery actions could be performed
- the allocation is quite deep in support code, and passing down an
extra flag to say if __GFP_NOFAIL is wanted would be clumsy.
Many of these currently use congestion_wait() which (in almost all
cases) simply waits the given timeout - congestion isn't tracked for
most devices.
It isn't clear what the best delay is for loops, but it is clear that
the various filesystems shouldn't be responsible for choosing a timeout.
This patch introduces memalloc_retry_wait() with takes on that
responsibility. Code that wants to retry a memory allocation can call
this function passing the GFP flags that were used. It will wait
however is appropriate.
For now, it only considers __GFP_NORETRY and whatever
gfpflags_allow_blocking() tests. If blocking is allowed without
__GFP_NORETRY, then alloc_page either made some reclaim progress, or
waited for a while, before failing. So there is no need for much
further waiting. memalloc_retry_wait() will wait until the current
jiffie ends. If this condition is not met, then alloc_page() won't have
waited much if at all. In that case memalloc_retry_wait() waits about
200ms. This is the delay that most current loops uses.
linux/sched/mm.h needs to be included in some files now,
but linux/backing-dev.h does not.
Link: https://lkml.kernel.org/r/163754371968.13692.1277530886009912421@noble.neil.brown.name
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Prepare for the removal of the block_device from the DAX I/O path by
returning the partition offset from fs_dax_get_by_bdev so that the file
systems have it at hand for use during I/O.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-26-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Hide the DAX device lookup from the xfs_super.c code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20211129102203.2243509-22-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Now that we've gotten rid of the kmem_zone_t typedef, rename the
variables to _cache since that's what they are.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Remove these typedefs by referencing kmem_cache directly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
- Fix a potential log livelock on busy filesystems when there's so much
work going on that we can't finish a quotaoff before filling up the log
by removing the ability to disable quota accounting.
- Introduce the ability to use per-CPU data structures in XFS so that
we can do a better job of maintaining CPU locality for certain
operations.
- Defer inode inactivation work to per-CPU lists, which will help us
batch that processing. Deletions of large sparse files will *appear*
to run faster, but all that means is that we've moved the work to the
backend.
- Drop the EXPERIMENTAL warnings from the y2038+ support and the inode
btree counters, since it's been nearly a year and no complaints have
come in.
- Remove more of our bespoke kmem* variants in favor of using the
standard Linux calls.
- Prepare for the addition of log incompat features in upcoming cycles
by actually adding code to support this.
- Small cleanups of the xattr code in preparation for landing support
for full logging of extended attribute updates in a future cycle.
- Replace the various log shutdown state and flag code all over xfs
with a single atomic bit flag.
- Fix a serious log recovery bug where log item replay can be skipped
based on the start lsn of a transaction even though the transaction
commit lsn is the key data point for that by enforcing start lsns to
appear in the log in the same order as commit lsns.
- Enable pipelining in the code that pushes log items to disk.
- Drop ->writepage.
- Fix some bugs in GETFSMAP where the last fsmap record reported for a
device could extend beyond the end of the device, and a separate bug
where query keys for one device could be applied to another.
- Don't let GETFSMAP query functions edit their input parameters.
- Small cleanups to the scrub code's handling of perag structures.
- Small cleanups to the incore inode tree walk code.
- Constify btree function parameters that aren't changed, so that there
will never again be confusion about range query functions changing
their input parameters.
- Standardize the format and names of tracepoint data attributes.
- Clean up all the mount state and feature flags to use wrapped bitset
functions instead of inconsistently open-coded flag checks.
- Fix some confusion between xfs_buf hash table key variable vs. block
number.
- Fix a mis-interaction with iomap where we reported shared delalloc
cow fork extents to iomap, which would cause the iomap unshare
operation to return IO errors unnecessarily.
- Fix DONTCACHE behavior.
-----BEGIN PGP SIGNATURE-----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=HPJr
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.15-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"There's a lot in this cycle.
Starting with bug fixes: To avoid livelocks between the logging code
and the quota code, we've disabled the ability of quotaoff to turn off
quota accounting. (Admins can still disable quota enforcement, but
truly turning off accounting requires a remount.) We've tried to do
this in a careful enough way that there shouldn't be any user visible
effects aside from quotaoff no longer randomly hanging the system.
We've also fixed some bugs in runtime log behavior that could trip up
log recovery if (otherwise unrelated) transactions manage to start and
commit concurrently; some bugs in the GETFSMAP ioctl where we would
incorrectly restrict the range of records output if the two xfs
devices are of different sizes; a bug that resulted in fallocate
funshare failing unnecessarily; and broken behavior in the xfs inode
cache when DONTCACHE is in play.
As for new features: we now batch inode inactivations in percpu
background threads, which sharply decreases frontend thread wait time
when performing file deletions and should improve overall directory
tree deletion times. This eliminates both the problem where closing an
unlinked file (especially on a frozen fs) can stall for a long time,
and should also ease complaints about direct reclaim bogging down on
unlinked file cleanup.
Starting with this release, we've enabled pipelining of the XFS log.
On workloads with high rates of metadata updates to different shards
of the filesystem, multiple threads can be used to format committed
log updates into log checkpoints.
Lastly, with this release, two new features have graduated to
supported status: inode btree counters (for faster mounts), and
support for dates beyond Y2038. Expect these to be enabled by default
in a future release of xfsprogs.
Summary:
- Fix a potential log livelock on busy filesystems when there's so
much work going on that we can't finish a quotaoff before filling
up the log by removing the ability to disable quota accounting.
- Introduce the ability to use per-CPU data structures in XFS so that
we can do a better job of maintaining CPU locality for certain
operations.
- Defer inode inactivation work to per-CPU lists, which will help us
batch that processing. Deletions of large sparse files will
*appear* to run faster, but all that means is that we've moved the
work to the backend.
- Drop the EXPERIMENTAL warnings from the y2038+ support and the
inode btree counters, since it's been nearly a year and no
complaints have come in.
- Remove more of our bespoke kmem* variants in favor of using the
standard Linux calls.
- Prepare for the addition of log incompat features in upcoming
cycles by actually adding code to support this.
- Small cleanups of the xattr code in preparation for landing support
for full logging of extended attribute updates in a future cycle.
- Replace the various log shutdown state and flag code all over xfs
with a single atomic bit flag.
- Fix a serious log recovery bug where log item replay can be skipped
based on the start lsn of a transaction even though the transaction
commit lsn is the key data point for that by enforcing start lsns
to appear in the log in the same order as commit lsns.
- Enable pipelining in the code that pushes log items to disk.
- Drop ->writepage.
- Fix some bugs in GETFSMAP where the last fsmap record reported for
a device could extend beyond the end of the device, and a separate
bug where query keys for one device could be applied to another.
- Don't let GETFSMAP query functions edit their input parameters.
- Small cleanups to the scrub code's handling of perag structures.
- Small cleanups to the incore inode tree walk code.
- Constify btree function parameters that aren't changed, so that
there will never again be confusion about range query functions
changing their input parameters.
- Standardize the format and names of tracepoint data attributes.
- Clean up all the mount state and feature flags to use wrapped
bitset functions instead of inconsistently open-coded flag checks.
- Fix some confusion between xfs_buf hash table key variable vs.
block number.
- Fix a mis-interaction with iomap where we reported shared delalloc
cow fork extents to iomap, which would cause the iomap unshare
operation to return IO errors unnecessarily.
- Fix DONTCACHE behavior"
* tag 'xfs-5.15-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (103 commits)
xfs: fix I_DONTCACHE
xfs: only set IOMAP_F_SHARED when providing a srcmap to a write
xfs: fix perag structure refcounting error when scrub fails
xfs: rename buffer cache index variable b_bn
xfs: convert bp->b_bn references to xfs_buf_daddr()
xfs: introduce xfs_buf_daddr()
xfs: kill xfs_sb_version_has_v3inode()
xfs: introduce xfs_sb_is_v5 helper
xfs: remove unused xfs_sb_version_has wrappers
xfs: convert xfs_sb_version_has checks to use mount features
xfs: convert scrub to use mount-based feature checks
xfs: open code sb verifier feature checks
xfs: convert xfs_fs_geometry to use mount feature checks
xfs: replace XFS_FORCED_SHUTDOWN with xfs_is_shutdown
xfs: convert remaining mount flags to state flags
xfs: convert mount flags to features
xfs: consolidate mount option features in m_features
xfs: replace xfs_sb_version checks with feature flag checks
xfs: reflect sb features in xfs_mount
xfs: rework attr2 feature and mount options
...
To stop external users from using b_bn as the disk address of the
buffer, rename it to b_rhash_key to indicate that it is the buffer
cache index, not the block number of the buffer. Code that needs the
disk address should use xfs_buf_daddr() to obtain it.
Do the rename and clean up any of the remaining internal b_bn users.
Also clean up any remaining b_bn cruft that is now unused.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Introduce a helper function xfs_buf_daddr() to extract the disk
address of the buffer from the struct xfs_buf. This will replace
direct accesses to bp->b_bn and bp->b_maps[0].bm_bn, as well as
the XFS_BUF_ADDR() macro.
This patch introduces the helper function and replaces all uses of
XFS_BUF_ADDR() as this is just a simple sed replacement.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Remove the shouty macro and instead use the inline function that
matches other state/feature check wrapper naming. This conversion
was done with sed.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The remaining mount flags kept in m_flags are actually runtime state
flags. These change dynamically, so they really should be updated
atomically so we don't potentially lose an update due to racing
modifications.
Convert these remaining flags to be stored in m_opstate and use
atomic bitops to set and clear the flags. This also adds a couple of
simple wrappers for common state checks - read only and shutdown.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Convert the xfs_sb_version_hasfoo() to checks against
mp->m_features. Checks of the superblock itself during disk
operations (e.g. in the read/write verifiers and the to/from disk
formatters) are not converted - they operate purely on the
superblock state. Everything else should use the mount features.
Large parts of this conversion were done with sed with commands like
this:
for f in `git grep -l xfs_sb_version_has fs/xfs/*.c`; do
sed -i -e 's/xfs_sb_version_has\(.*\)(&\(.*\)->m_sb)/xfs_has_\1(\2)/' $f
done
With manual cleanups for things like "xfs_has_extflgbit" and other
little inconsistencies in naming.
The result is ia lot less typing to check features and an XFS binary
size reduced by a bit over 3kB:
$ size -t fs/xfs/built-in.a
text data bss dec hex filenam
before 1130866 311352 484 1442702 16038e (TOTALS)
after 1127727 311352 484 1439563 15f74b (TOTALS)
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Since commit 59bb47985c ("mm, sl[aou]b: guarantee natural alignment
for kmalloc(power-of-two)"), the core slab code now guarantees slab
alignment in all situations sufficient for IO purposes (i.e. minimum
of 512 byte alignment of >= 512 byte sized heap allocations) we no
longer need the workaround in the XFS code to provide this
guarantee.
Replace the use of kmem_alloc_io() with kmem_alloc() or
kmem_alloc_large() appropriately, and remove the kmem_alloc_io()
interface altogether.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Just retrieve the bdi from the disk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210809141744.1203023-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's a one line wrapper around blkdev_issue_flush(). Just replace it
with direct calls to blkdev_issue_flush().
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
'error' will be initialized, so clean up the redundant initialization.
Cc: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
If we want to use active references to the perag to be able to gate
shrink removing AGs and hence perags safely, we've got a fair bit of
work to do actually use perags in all the places we need to.
There's a lot of code that iterates ag numbers and then
looks up perags from that, often multiple times for the same perag
in the one operation. If we want to use reference counted perags for
access control, then we need to convert all these uses to perag
iterators, not agno iterators.
[Patches 1-4]
The first step of this is consolidating all the perag management -
init, free, get, put, etc into a common location. THis is spread all
over the place right now, so move it all into libxfs/xfs_ag.[ch].
This does expose kernel only bits of the perag to libxfs and hence
userspace, so the structures and code is rearranged to minimise the
number of ifdefs that need to be added to the userspace codebase.
The perag iterator in xfs_icache.c is promoted to a first class API
and expanded to the needs of the code as required.
[Patches 5-10]
These are the first basic perag iterator conversions and changes to
pass the perag down the stack from those iterators where
appropriate. A lot of this is obvious, simple changes, though in
some places we stop passing the perag down the stack because the
code enters into an as yet unconverted subsystem that still uses raw
AGs.
[Patches 11-16]
These replace the agno passed in the btree cursor for per-ag btree
operations with a perag that is passed to the cursor init function.
The cursor takes it's own reference to the perag, and the reference
is dropped when the cursor is deleted. Hence we get reference
coverage for the entire time the cursor is active, even if the code
that initialised the cursor drops it's reference before the cursor
or any of it's children (duplicates) have been deleted.
The first patch adds the perag infrastructure for the cursor, the
next four patches convert a btree cursor at a time, and the last
removes the agno from the cursor once it is unused.
[Patches 17-21]
These patches are a demonstration of the simplifications and
cleanups that come from plumbing the perag through interfaces that
select and then operate on a specific AG. In this case the inode
allocation algorithm does up to three walks across all AGs before it
either allocates an inode or fails. Two of these walks are purely
just to select the AG, and even then it doesn't guarantee inode
allocation success so there's a third walk if the selected AG
allocation fails.
These patches collapse the selection and allocation into a single
loop, simplifies the error handling because xfs_dir_ialloc() always
returns ENOSPC if no AG was selected for inode allocation or we fail
to allocate an inode in any AG, gets rid of xfs_dir_ialloc()
wrapper, converts inode allocation to run entirely from a single
perag instance, and then factors xfs_dialloc() into a much, much
simpler loop which is easy to understand.
Hence we end up with the same inode allocation logic, but it only
needs two complete iterations at worst, makes AG selection and
allocation atomic w.r.t. shrink and chops out out over 100 lines of
code from this hot code path.
[Patch 22]
Converts the unlink path to pass perags through it.
There's more conversion work to be done, but this patchset gets
through a large chunk of it in one hit. Most of the iterators are
converted, so once this is solidified we can move on to converting
these to active references for being able to free perags while the
fs is still active.
-----BEGIN PGP SIGNATURE-----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=YNzW
-----END PGP SIGNATURE-----
Merge tag 'xfs-perag-conv-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs into xfs-5.14-merge2
xfs: initial agnumber -> perag conversions for shrink
If we want to use active references to the perag to be able to gate
shrink removing AGs and hence perags safely, we've got a fair bit of
work to do actually use perags in all the places we need to.
There's a lot of code that iterates ag numbers and then
looks up perags from that, often multiple times for the same perag
in the one operation. If we want to use reference counted perags for
access control, then we need to convert all these uses to perag
iterators, not agno iterators.
[Patches 1-4]
The first step of this is consolidating all the perag management -
init, free, get, put, etc into a common location. THis is spread all
over the place right now, so move it all into libxfs/xfs_ag.[ch].
This does expose kernel only bits of the perag to libxfs and hence
userspace, so the structures and code is rearranged to minimise the
number of ifdefs that need to be added to the userspace codebase.
The perag iterator in xfs_icache.c is promoted to a first class API
and expanded to the needs of the code as required.
[Patches 5-10]
These are the first basic perag iterator conversions and changes to
pass the perag down the stack from those iterators where
appropriate. A lot of this is obvious, simple changes, though in
some places we stop passing the perag down the stack because the
code enters into an as yet unconverted subsystem that still uses raw
AGs.
[Patches 11-16]
These replace the agno passed in the btree cursor for per-ag btree
operations with a perag that is passed to the cursor init function.
The cursor takes it's own reference to the perag, and the reference
is dropped when the cursor is deleted. Hence we get reference
coverage for the entire time the cursor is active, even if the code
that initialised the cursor drops it's reference before the cursor
or any of it's children (duplicates) have been deleted.
The first patch adds the perag infrastructure for the cursor, the
next four patches convert a btree cursor at a time, and the last
removes the agno from the cursor once it is unused.
[Patches 17-21]
These patches are a demonstration of the simplifications and
cleanups that come from plumbing the perag through interfaces that
select and then operate on a specific AG. In this case the inode
allocation algorithm does up to three walks across all AGs before it
either allocates an inode or fails. Two of these walks are purely
just to select the AG, and even then it doesn't guarantee inode
allocation success so there's a third walk if the selected AG
allocation fails.
These patches collapse the selection and allocation into a single
loop, simplifies the error handling because xfs_dir_ialloc() always
returns ENOSPC if no AG was selected for inode allocation or we fail
to allocate an inode in any AG, gets rid of xfs_dir_ialloc()
wrapper, converts inode allocation to run entirely from a single
perag instance, and then factors xfs_dialloc() into a much, much
simpler loop which is easy to understand.
Hence we end up with the same inode allocation logic, but it only
needs two complete iterations at worst, makes AG selection and
allocation atomic w.r.t. shrink and chops out out over 100 lines of
code from this hot code path.
[Patch 22]
Converts the unlink path to pass perags through it.
There's more conversion work to be done, but this patchset gets
through a large chunk of it in one hit. Most of the iterators are
converted, so once this is solidified we can move on to converting
these to active references for being able to free perags while the
fs is still active.
* tag 'xfs-perag-conv-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (23 commits)
xfs: remove xfs_perag_t
xfs: use perag through unlink processing
xfs: clean up and simplify xfs_dialloc()
xfs: inode allocation can use a single perag instance
xfs: get rid of xfs_dir_ialloc()
xfs: collapse AG selection for inode allocation
xfs: simplify xfs_dialloc_select_ag() return values
xfs: remove agno from btree cursor
xfs: use perag for ialloc btree cursors
xfs: convert allocbt cursors to use perags
xfs: convert refcount btree cursor to use perags
xfs: convert rmap btree cursor to using a perag
xfs: add a perag to the btree cursor
xfs: pass perags around in fsmap data dev functions
xfs: push perags through the ag reservation callouts
xfs: pass perags through to the busy extent code
xfs: convert secondary superblock walk to use perags
xfs: convert xfs_iwalk to use perag references
xfs: convert raw ag walks to use for_each_perag
xfs: make for_each_perag... a first class citizen
...
It only has one caller and is now a simple function, so merge it
into the caller.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Use a single goto label for freeing the buffer and returning an
error.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Only used in one place, so just open code the logic in the macro.
Based on a patch from Christoph Hellwig.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Ever since we stopped using the Linux page cache to back XFS buffers
there is no need to take the start sector into account for
calculating the number of pages in a buffer, as the data always
start from the beginning of the buffer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[dgc: modified to suit this series]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
->b_offset can only be non-zero for _XBF_KMEM backed buffers, so
remove all code dealing with it for page backed buffers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[dgc: modified to fit this patchset]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
They are AG functions, not superblock functions, so move them to the
appropriate location.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Rather than open coding it just before we call
_xfs_buf_free_pages(). Also, rename the function to
xfs_buf_free_pages() as the leading underscore has no useful
meaning.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Only called from one place now, so merge it into
xfs_buf_alloc_pages(). Because page array allocation is dependent on
bp->b_pages being null, always ensure that when the pages array is
freed we always set bp->b_pages to null.
Also convert the page array to use kmalloc() rather than
kmem_alloc() so we can use the gfp flags we've already calculated
for the allocation context instead of hard coding KM_NOFS semantics.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Because it's more efficient than allocating pages one at a time in a
loop.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Use the newly factored out page allocation code. This adds
automatic buffer zeroing for non-read uncached buffers.
This also allows us to greatly simply the error handling in
xfs_buf_get_uncached(). Because xfs_buf_alloc_pages() cleans up
partial allocation failure, we can just call xfs_buf_free() in all
error cases now to clean up after failures.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Based on a patch from Christoph Hellwig.
This splits out the heap allocation and page allocation portions of
the buffer memory allocation into two separate helper functions.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
list_sort() internally casts the comparison function passed to it
to a different type with constant struct list_head pointers, and
uses this pointer to call the functions, which trips indirect call
Control-Flow Integrity (CFI) checking.
Instead of removing the consts, this change defines the
list_cmp_func_t type and changes the comparison function types of
all list_sort() callers to use const pointers, thus avoiding type
mismatches.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-10-samitolvanen@google.com
Darrick J. Wong