Commit Graph

810275 Commits

Author SHA1 Message Date
Richard Zhu 75cb8d20c1 PCI: imx: Enable MSI from downstream components
The MSI Enable bit in the MSI Capability (PCIe r4.0, sec 7.7.1.2) controls
whether a Function can request service using MSI.

i.MX6 Root Ports implement the MSI Capability and may use MSI to request
service for events like PME, hotplug, AER, etc.  In addition, on i.MX6, the
MSI Enable bit controls delivery of MSI interrupts from components below
the Root Port.

Prior to f3fdfc4ac3 ("PCI: Remove host driver Kconfig selection of
CONFIG_PCIEPORTBUS"), enabling CONFIG_PCI_IMX6 automatically also enabled
CONFIG_PCIEPORTBUS, and when portdrv claimed the Root Ports, it set the MSI
Enable bit so it could use PME, hotplug, AER, etc.  As a side effect, that
also enabled delivery of MSI interrupts from downstream components.

The imx6q-pcie driver itself does not depend on portdrv, so set MSI Enable
in imx6q-pcie so MSI from downstream components works even if nobody uses
MSI for the Root Port events.

Fixes: f3fdfc4ac3 ("PCI: Remove host driver Kconfig selection of CONFIG_PCIEPORTBUS")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Sven Van Asbroeck <TheSven73@googlemail.com>
Tested-by: Trent Piepho <tpiepho@impinj.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-01-01 19:16:48 -06:00
Sebastian Ott 7dc20ab1b9 s390/pci: skip VF scanning
Set the flag to skip scanning for VFs after SR-IOV enablement.  VF creation
will be triggered by the hotplug code.

Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-01-01 19:06:48 -06:00
Sebastian Ott aff68a5a62 PCI/IOV: Add flag so platforms can skip VF scanning
Provide a flag to skip scanning for new VFs after SR-IOV enablement.  This
can be set by implementations for which the VFs are already reported by
other means.

Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-01-01 19:04:37 -06:00
Sebastian Ott 18f9e9d150 PCI/IOV: Factor out sriov_add_vfs()
Provide sriov_add_vfs() as a wrapper to scan for VFs that cleans up after
itself.  This is just a code simplification.  No functional change.

Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-01-01 19:03:51 -06:00
Linus Torvalds 8e143b90e4 IOMMU Updates for Linux v4.21
Including (in no particular order):
 
 	- Page table code for AMD IOMMU now supports large pages where
 	  smaller page-sizes were mapped before. VFIO had to work around
 	  that in the past and I included a patch to remove it (acked by
 	  Alex Williamson)
 
 	- Patches to unmodularize a couple of IOMMU drivers that would
 	  never work as modules anyway.
 
 	- Work to unify the the iommu-related pointers in
 	  'struct device' into one pointer. This work is not finished
 	  yet, but will probably be in the next cycle.
 
 	- NUMA aware allocation in iommu-dma code
 
 	- Support for r8a774a1 and r8a774c0 in the Renesas IOMMU driver
 
 	- Scalable mode support for the Intel VT-d driver
 
 	- PM runtime improvements for the ARM-SMMU driver
 
 	- Support for the QCOM-SMMUv2 IOMMU hardware from Qualcom
 
 	- Various smaller fixes and improvements
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJcKkEoAAoJECvwRC2XARrjCCoQAJxsgaAF5Z0s7z8j2A9SkaGp
 SIMnUAI5mDOdyhTOAI+eehpRzg5UVYt/JjFYnHz8HWqbSc8YOvDvHafmhMFIwYvO
 hq5knbs6ns2jJNFO+M4dioDq+3THdqkGIF5xoHdGTP7cn9+XyQ8lAoHo0RuL122U
 PJGqX7Cp4XnFP4HMb3uQYhVeBV7mU+XqAdB+4aDnQkzI5LkQCRr74GcqOm+Rlnyc
 cmQWc2arUMjgc1TJIrex8dx9dT6lq8kOmhyEg/IjHeGaZyJ3HqA+30XDDLEExN0G
 MeVawuxJz40HgXlkXr+iZTQtIFYkXdKvJH6rptMbOfbDeDz+YZ01TbtAMMH9o4jX
 yxjjMjdcWTsWYQ/MHHdsoMP34cajCi/EYPMNksbycw+E3Y+X/bSReCoWC0HUK8/+
 Z4TpZ9mZVygtJR+QNZ+pE9oiJpb4sroM10zTnbMoVHNnvfsO01FYk7FMPkolSKLw
 zB4MDswQYgchoFR9Z4ZB4PycYTzeafLKYgDPDoD1vIJgDavuidwvDWDRTDc+aMWM
 siIIewq19To9jDJkVjX4dsT/p99KVKgAR/Ps6jjWkAroha7g6GcmlYZHIJnyop04
 jiaSXUsk8aRucP/CRz5xdMmaGoN7BsNmpUjcrquc6Povk/6gvXvpY04oCs1+gNMX
 ipL9E3GTFCVBubRFrksv
 =DT9A
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:

 - Page table code for AMD IOMMU now supports large pages where smaller
   page-sizes were mapped before. VFIO had to work around that in the
   past and I included a patch to remove it (acked by Alex Williamson)

 - Patches to unmodularize a couple of IOMMU drivers that would never
   work as modules anyway.

 - Work to unify the the iommu-related pointers in 'struct device' into
   one pointer. This work is not finished yet, but will probably be in
   the next cycle.

 - NUMA aware allocation in iommu-dma code

 - Support for r8a774a1 and r8a774c0 in the Renesas IOMMU driver

 - Scalable mode support for the Intel VT-d driver

 - PM runtime improvements for the ARM-SMMU driver

 - Support for the QCOM-SMMUv2 IOMMU hardware from Qualcom

 - Various smaller fixes and improvements

* tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (78 commits)
  iommu: Check for iommu_ops == NULL in iommu_probe_device()
  ACPI/IORT: Don't call iommu_ops->add_device directly
  iommu/of: Don't call iommu_ops->add_device directly
  iommu: Consolitate ->add/remove_device() calls
  iommu/sysfs: Rename iommu_release_device()
  dmaengine: sh: rcar-dmac: Use device_iommu_mapped()
  xhci: Use device_iommu_mapped()
  powerpc/iommu: Use device_iommu_mapped()
  ACPI/IORT: Use device_iommu_mapped()
  iommu/of: Use device_iommu_mapped()
  driver core: Introduce device_iommu_mapped() function
  iommu/tegra: Use helper functions to access dev->iommu_fwspec
  iommu/qcom: Use helper functions to access dev->iommu_fwspec
  iommu/of: Use helper functions to access dev->iommu_fwspec
  iommu/mediatek: Use helper functions to access dev->iommu_fwspec
  iommu/ipmmu-vmsa: Use helper functions to access dev->iommu_fwspec
  iommu/dma: Use helper functions to access dev->iommu_fwspec
  iommu/arm-smmu: Use helper functions to access dev->iommu_fwspec
  ACPI/IORT: Use helper functions to access dev->iommu_fwspec
  iommu: Introduce wrappers around dev->iommu_fwspec
  ...
2019-01-01 15:55:29 -08:00
Linus Torvalds 78e8696c23 dmaengine-4.21-rc1
dmaengine updates for v4.21-rc1
 
  - New driver for UniPhier MIO DMA controller
  - Remove R-Mobile APE6 support
  - Sprd driver updates and support for cyclic link-list
  - Remove dma_slave_config direction usage from rest of drivers
  - Minor updates to dmatest, dw-dmac, zynqmp and bcm dma drivers
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcKipaAAoJEHwUBw8lI4NH87kQAJF5tSQzvh4alAwntJ+rNZfw
 bgiUW29f7PxEzEGDsTBuFsw9zPhGxPnwtXzLm2iSDBGqkEcwKc+yretuX3Pgkce+
 IpPkCBGcfXptSJxFz4XxBi3HCkZ+jlhy33pH+hkW/tA4SIcA+VJjfQLePiY3sVMO
 1QUFDaL9NEyEfgJTmUShaPvCiz+3OHjY/3LAMlbLqQer4C9zC3iyvZIf9lvPQQnt
 qJaFuEiqlhw6eOAGw+2frMYDEV57QEiRgghBZyFm5RxG19XCcPkVV9id22rz5TQb
 +mQXhyaLvDiztWf71dFlXW2nW8mjewcjNU4h5g3RTyLA7fpLNcpMyZY2WizIADVS
 x6a7/HSrDjD4CN6pGDmRi8vvqkTAEDCsrfUM6K43rAsoZzU5elVJwOv4m8WB3CCF
 pRlUwFi6ENt8Ov8CWgCCaY0/Bzj1FgjN3BY87amBsI9wF4fkpCPNdWw34a6lg1Kf
 SzyPty8Z+i+6rtKps7Mh9VOZI2tryPJzyAWrcOCDWQoiR/RWzgC3y6SuwCdiyaDf
 8hFV4xnB0oVJ8vsTjF1AgxVwEsqQ7TVTIsLAns6jEnTC5FAnOLd0iwh56a+rw+lR
 7e1iuQYllZ1rdMi+r5gWG4OCsZehmZgCqc250om51tzA1SDVDQ3bbx8clxZeha80
 AKr5MVrIVp7riYFEICvp
 =+pTt
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-4.21-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
 "This includes a new driver, removes R-Mobile APE6 as it is no longer
  used, sprd cyclic dma support, last batch of dma_slave_config
  direction removal and random updates to bunch of drivers.

  Summary:
   - New driver for UniPhier MIO DMA controller
   - Remove R-Mobile APE6 support
   - Sprd driver updates and support for cyclic link-list
   - Remove dma_slave_config direction usage from rest of drivers
   - Minor updates to dmatest, dw-dmac, zynqmp and bcm dma drivers"

* tag 'dmaengine-4.21-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (48 commits)
  dmaengine: qcom_hidma: convert to DEFINE_SHOW_ATTRIBUTE
  dmaengine: pxa: remove DBGFS_FUNC_DECL()
  dmaengine: mic_x100_dma: convert to DEFINE_SHOW_ATTRIBUTE
  dmaengine: amba-pl08x: convert to DEFINE_SHOW_ATTRIBUTE
  dmaengine: Documentation: Add documentation for multi chan testing
  dmaengine: dmatest: Add transfer_size parameter
  dmaengine: dmatest: Add alignment parameter
  dmaengine: dmatest: Use fixed point div to calculate iops
  dmaengine: dmatest: Add support for multi channel testing
  dmaengine: rcar-dmac: Document R8A774C0 bindings
  dt-bindings: dmaengine: usb-dmac: Add binding for r8a774c0
  dmaengine: zynqmp_dma: replace spin_lock_bh with spin_lock_irqsave
  dmaengine: sprd: Add me as one of the module authors
  dmaengine: sprd: Support DMA 2-stage transfer mode
  dmaengine: sprd: Support DMA link-list cyclic callback
  dmaengine: sprd: Set cur_desc as NULL when free or terminate one dma channel
  dmaengine: sprd: Fix the last link-list configuration
  dmaengine: sprd: Get transfer residue depending on the transfer direction
  dmaengine: sprd: Remove direction usage from struct dma_slave_config
  dmaengine: dmatest: fix a small memory leak in dmatest_func()
  ...
2019-01-01 15:45:48 -08:00
Linus Torvalds fcf010449e kgdb patches for 4.20-rc1
Mostly clean ups although whilst Doug's was chasing down a odd
 lockdep warning he also did some work to improved debugger resilience
 when some CPUs fail to respond to the round up request.
 
 The main changes are:
 
  * Fixing a lockdep warning on architectures that cannot use an NMI for
    the round up plus related changes to make CPU round up and all CPU
    backtrace more resilient.
 
  * Constify the arch ops tables
 
  * A couple of other small clean ups
 
 Two of the three patchsets here include changes that spill over into
 arch/.  Changes in the arch space are relatively narrow in scope
 (and directly related to kgdb). Didn't get comprehensive acks but
 all impacted maintainers were Cc:ed in good time.
 
 Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEELzVBU1D3lWq6cKzwfOMlXTn3iKEFAlwonoUbHGRhbmllbC50
 aG9tcHNvbkBsaW5hcm8ub3JnAAoJEHzjJV0594ihmooP/1uzSMGQIoQMB8XeU/jT
 Da2iILybi6hGp7ILA27d0yN3tsJBxWGWs8wzNdzMo3NQ3J0o4foAUnS/R0Vjkg9w
 uphe5EA4HDsIrH05OouNb984BeEgNaC9HSqtyr9fXuh024NboULFKIm7REYm+QHT
 C5SrBtmonL1xE7FmAhudLWjl7ZlvxM6DJeoVViH4kKq0raTiILt6VJaGl9JfcAdL
 m9GEf9r/nh0sCq3GNgyc0y4BvHed+Kxzy1fsIi3jE6t8elaYYR72gNRQ5LaFxcnQ
 F04/UtH75qB4rqYsqqV1q0rFi+tj+p9wYTmxixaGWsVDX4Gb5KXuLWJhaRb5IvwC
 bdq/0IAXRr4vUL3y0tFWfCj7pHGaVc/gfXi8aieRXLGAZG+tdfuu99NCiulIZTfc
 QqZz12Z+99/qi6dK7dBQtaN8SyPeB1QXKWefeGo2Bt5QqiBmcKHxsQYMUo3nkf3J
 UXHpj4LG6Ldsi/w8VZfvXmM0/vbO/jrus9m+X2v+4tJyisjrsyv0FRnREI4avfbC
 l09P1ajv7RrAaxtab0smV9krqWZ/mSn0zcgcaD6RdKe0+SwsiP/CEx1z1Wb1MH9c
 wjEiClXjdVB39YVT0YVfG2Ho7qH8WRErxVyNb/f4QKHMXL1Mu91hFWhBBpUOGUj2
 7Jrq2zK1uWramtt7GBDpHYYH
 =Aqlc
 -----END PGP SIGNATURE-----

Merge tag 'kgdb-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux

Pull kgdb updates from Daniel Thompson:
 "Mostly clean ups although while Doug's was chasing down a odd lockdep
  warning he also did some work to improved debugger resilience when
  some CPUs fail to respond to the round up request.

  The main changes are:

   - Fixing a lockdep warning on architectures that cannot use an NMI
     for the round up plus related changes to make CPU round up and all
     CPU backtrace more resilient.

   - Constify the arch ops tables

   - A couple of other small clean ups

  Two of the three patchsets here include changes that spill over into
  arch/. Changes in the arch space are relatively narrow in scope (and
  directly related to kgdb). Didn't get comprehensive acks but all
  impacted maintainers were Cc:ed in good time"

* tag 'kgdb-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  kgdb/treewide: constify struct kgdb_arch arch_kgdb_ops
  mips/kgdb: prepare arch_kgdb_ops for constness
  kdb: use bool for binary state indicators
  kdb: Don't back trace on a cpu that didn't round up
  kgdb: Don't round up a CPU that failed rounding up before
  kgdb: Fix kgdb_roundup_cpus() for arches who used smp_call_function()
  kgdb: Remove irq flags from roundup
2019-01-01 15:38:14 -08:00
Linus Torvalds fbea8c7c79 OpenRISC updates for 4.21
Just one change for 4.21:
  - Update comments for name change or32 -> or1k from Geert Uytterhoeven
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcKpJrAAoJEMOzHC1eZifkDC4QAJCia7c68WOSv6AfCPkf4dNQ
 xAnBB4iMn041QnmXm90XVx5IVrupNrtUVWqqwGqD6R7FuRQDbz+LpKY6jRSUDQpk
 E7HgFmvUbjU9WOUFqPClZ9hu/5NdnrcmXsV9fld4nUwMpIjay2ehgDFQlf/PZoSo
 P2Mh4WBVY+3ARSrEqtDxkFKlYushvueVjJLofRwjjb3CdryY9pQEyf521K94DUeS
 UUFSxZTXgHHRn3jXaMiXsIp5PXL/XOics1D1u+n/8/hBiMOKo/j/+byFmmF3LU15
 jz7P1XUSZ/UI6Ulkwh9GSQWKMrxTbPSQvEExHqtLx5fgITKOhNxeBAh+c9Kzt8a0
 pWsMioBsvDlZ07i9kfhpCfMZMzxLDy8c7aiCSthxSeKNPf5+NTJE3Z+7glyUT12s
 u8m4FnTHGsbnfQgRt3GwNRLpp/Mhp7SNqgKGw2xRR2EbsxBooQeycdkoldW2EoBW
 bL6DGXFIivsf1iuonDeybV/FMGeeV/3IwXKGzatwjkirgkbbB9gDH1gCCJOpUwC5
 PWjxQw+4OL4/7z9bvnCCH75hYg0MjcLfxdJfczJfRLaSL2xyfyrmt0mav4Xs06rQ
 NNGfX8Yl7BQgxf6jVB/jRL33GXx/lpE/J5XT7i3T917T0bOhfuhQJJoo2+15lc/M
 uxEES4JraL6NXCkr06dv
 =bY+D
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://github.com/openrisc/linux

Pull OpenRISC update from Stafford Horne:
 "Just one change for 4.21: Update comments for name change or32 -> or1k
  from Geert Uytterhoeven"

* tag 'for-linus' of git://github.com/openrisc/linux:
  openrisc: Fix broken paths to arch/or32
2019-01-01 15:35:55 -08:00
Linus Torvalds 28e8c4bc8e RTC for 4.21
Subsystem:
  - new %ptR printk format
  - rename core files
  - allow registration of multiple nvmem devices
 
 New driver:
  - i.MX system controller RTC
 
 Drivers:
  - abx80x: handle voltage ioctls, correct binding doc
  - m41t80: correct month in alarm reads
  - pcf85363: add pcf85263 support
  - pcf8523: properly handle battery low flag
  - s3c: limit alarm to one year in the future as ALMYEAR is broken
  - sun6i: rework clock output binding
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEXx9Viay1+e7J/aM4AyWl4gNJNJIFAlwqU44ACgkQAyWl4gNJ
 NJJjGxAAgQMTkarMx16icKpN35iuXgwZdIKKmWIHGyCJeB1ykHS8TgwkP+4pE1aN
 UwTw6x9TBxa9KpuexCgrx8/zppM0i1jacaxJkDbrj1OBPAlGrbJrwcSH029qHAu6
 N1Oo0GvAIPlEmIJkKVWkgZhGqUwvMvcy2amk06S92PPOIfr5zJsRzNmduEE7bpcl
 86EckuFOp9c1p4IayeQhIT+GHPtum4WkmGVw3+j0j/E6aCUD3thLohT+KuGfzzKn
 jHbtZ+/d17etKtxxI26YrmixH603t66ZSuc64rSvKRKYR8u/qqR3ZTotYVonsPHj
 NNQsWiNRzwkpiN9n1Big0tLJyXJ6qbYQIrJLMc19Jr10tS815WF5rjmNinfdSazX
 4xucIJpMh7VgA3W5BpvN1+UEahiznp2QGiLjauoruMrB7XUUSLPv6VohFiKAfd9S
 7SyV2moPWVnj4pJPH6Af2zVLE9YyPoWGvUSwosLZKhpoFNLOnVZAU0vo32M/23wv
 ejv4YPhtqxqT94XUyrWKE1DaTpxMqBHcHj2ThV+NGCWe4C0+KfW0zmbKm1X588UJ
 ZhmGODV9acU+46It5mFoE2Zb9WPyEwljjxbvXKQZhdONKIoZ6lz1i7nzy6C2qerQ
 ZW5baiaCvQ5e/NyWLxEZwvHukBo2OBxkXe8isuk/wz+7Qyw3l34=
 =5He5
 -----END PGP SIGNATURE-----

Merge tag 'rtc-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "Subsystem:
   - new %ptR printk format
   - rename core files
   - allow registration of multiple nvmem devices

  New driver:
   - i.MX system controller RTC

  Driver updates:
   - abx80x: handle voltage ioctls, correct binding doc
   - m41t80: correct month in alarm reads
   - pcf85363: add pcf85263 support
   - pcf8523: properly handle battery low flag
   - s3c: limit alarm to one year in the future as ALMYEAR is broken
   - sun6i: rework clock output binding"

* tag 'rtc-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (54 commits)
  rtc: rename core files
  rtc: nvmem: fix possible use after free
  rtc: add i.MX system controller RTC support
  dt-bindings: fsl: scu: add rtc binding
  rtc: pcf2123: Add Microcrystal rv2123
  rtc: class: reimplement devm_rtc_device_register
  rtc: enforce rtc_timer_init private_data type
  rtc: abx80x: Implement RTC_VL_READ,CLR ioctls
  rtc: pcf85363: Add support for NXP pcf85263 rtc
  dt-bindings: rtc: pcf85363: Document pcf85263 real-time clock
  rtc: pcf8523: don't return invalid date when battery is low
  dt-bindings: rtc: use a generic node name for ds1307
  PM: Switch to use %ptR
  m68k/mac: Switch to use %ptR
  Input: hp_sdc_rtc - Switch to use %ptR
  rtc: tegra: Switch to use %ptR
  rtc: s5m: Switch to use %ptR
  rtc: s3c: Switch to use %ptR
  rtc: rx8025: Switch to use %ptR
  rtc: rx6110: Switch to use %ptR
  ...
2019-01-01 13:24:31 -08:00
Linus Torvalds c9bef4a651 Pin control bulk changes for the v4.21 kernel cycle:
No core changes this time.
 
 New drivers:
 
 - NXP (ex Freescale) i.MX 8 QXP SoC driver.
 
 - Mediatek MT6797 SoC driver.
 
 - Mediatek MT7629 SoC driver.
 
 - Actions Semiconductor S700 SoC driver.
 
 - Renesas RZ/A2 SoC driver.
 
 - Allwinner sunxi suniv F1C100 SoC driver.
 
 - Qualcomm PMS405 PMIC driver.
 
 - Microsemi Ocelot Jaguar2 SoC driver.
 
 Improvements:
 
 - Some RT improvements (using raw spinlocks where appropriate).
 
 - A lot of new pin sets on the Renesas PFC pin controllers.
 
 - GPIO hogs now work on the Qualcomm SPMI/SSBI pin controller GPIO
   chips, and Xway.
 
 - Major modernization of the Intel pin control drivers.
 
 - STM32 pin control driver will now synchronize usage of pins
   with another CPU using a hardware spinlock.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcKN2qAAoJEEEQszewGV1zK5wP/2QbrvH8eW+mF9YD+1fr11Sp
 oCe52C7n1YMKt5R6vSFyLtqPYDehCP9gTS0Zlbz4HKyTe2E9OIuigrmg+1uQwxWp
 GSvxmMx9QFlNqUcWOvc90DYDfOh5ZPVIsP16k3DIlodVsQlSu4O4KF0pJseRyuSh
 PVn/MjPrGtyTB2TJzO/Oj3sadHhVRzTb6Zlk7uk5hak6ys5AYHetBHhuxAcicFv4
 OGwEOvaV5DiTO5wbbyNSmkF5NI+ApV2o4DRRNTXC+mJJSPCpQxFskLTmHu9wYKmE
 /p6Gp9dtxSS3QLA4NXsY+IrFJsU1q261gEvIsFa2upW5j7T8bLzRAzoFG+/dil6t
 k5GDnx8t7qSPXLme8/nJlX40O2CJs4sXKwCQY4vjsySW31ryqBMm4JNSQKTxe9Ma
 1RrZ7UR+P6IwupUsEYZkcneuu+oGMNYpbDG48R2utgECY4KN17wUjjZHkYHZNiDi
 Yk/CMkOXXuZnAZGfmaj8R9yjkjFZMZAqOYDJcruMzLFjAkw6fCmFipZLoSIN4+sJ
 u4RERrbsF+e5PY4BOfxYw5NIzTl60AQquttj//RJyLQDsQ/HMU9jaovW6E3JQytO
 NgU9RtEwrtK50ef5OYS4EtTlNi2B3arU83noI/oX3R52SoAIdMTHtVMgyECm3dMg
 XeLn9x2Ffy7a4PRruLoy
 =cm6m
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "We have no core changes but lots of incremental development in drivers
  all over the place: Renesas, NXP, Mediatek and Actions Semiconductor
  keep churning out new SoCs.

  I have some subtree maintainers for Renesas and Intel helping out to
  keep down the load, it's been working smoothly (Samsung also have a
  subtree but it was not used this cycle.)

  New drivers:

   - NXP (ex Freescale) i.MX 8 QXP SoC driver.

   - Mediatek MT6797 SoC driver.

   - Mediatek MT7629 SoC driver.

   - Actions Semiconductor S700 SoC driver.

   - Renesas RZ/A2 SoC driver.

   - Allwinner sunxi suniv F1C100 SoC driver.

   - Qualcomm PMS405 PMIC driver.

   - Microsemi Ocelot Jaguar2 SoC driver.

  Improvements:

   - Some RT improvements (using raw spinlocks where appropriate).

   - A lot of new pin sets on the Renesas PFC pin controllers.

   - GPIO hogs now work on the Qualcomm SPMI/SSBI pin controller GPIO
     chips, and Xway.

   - Major modernization of the Intel pin control drivers.

   - STM32 pin control driver will now synchronize usage of pins with
     another CPU using a hardware spinlock"

* tag 'pinctrl-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (145 commits)
  dt-bindings: arm: fsl-scu: add imx8qm pinctrl support
  pinctrl: freescale: Break dependency on SOC_IMX8MQ for i.MX8MQ
  pinctrl: imx-scu: Depend on IMX_SCU
  pinctrl: ocelot: Add dependency on HAS_IOMEM
  pinctrl: ocelot: add MSCC Jaguar2 support
  pinctrl: bcm: ns: support updated DT binding as syscon subnode
  dt-bindings: pinctrl: bcm4708-pinmux: rework binding to use syscon
  MAINTAINERS: merge at91 pinctrl entries
  pinctrl: imx8qxp: break the dependency on SOC_IMX8QXP
  pinctrl: uniphier: constify uniphier_pinctrl_socdata
  pinctrl: mediatek: improve Kconfig dependencies
  pinctrl: msm: mark PM functions as __maybe_unused
  dt-bindings: pinctrl: sunxi: Add supply properties
  pinctrl: meson: meson8b: add the missing GPIO_GROUPs for BOOT and CARD
  pinctrl: meson: meson8: add the missing GPIO_GROUPs for BOOT and CARD
  pinctrl: meson: meson8: rename the "gpio" function to "gpio_periphs"
  pinctrl: meson: meson8: rename the "gpio" function to "gpio_periphs"
  pinctrl: meson: meson8b: fix the GPIO function for the GPIOAO pins
  pinctrl: meson: meson8: fix the GPIO function for the GPIOAO pins
  pinctrl: sh-pfc: Make pinmux_cfg_reg.var_field_width[] variable-length
  ...
2019-01-01 13:19:16 -08:00
Linus Torvalds 115502a6f3 linux-watchdog 4.21-rc1 tag
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iEYEABECAAYFAlwopYUACgkQ+iyteGJfRsqOZwCfXM0u0XQJS6TZFtEOZp5gKq+d
 f/4AnRXcblmb1wJiEVItizB03leOWHqk
 =jry0
 -----END PGP SIGNATURE-----

Merge tag 'linux-watchdog-4.21-rc1' of git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:
 - add TQ-Systems TQMX86 watchdog driver
 - add Qualcomm PM8916 watchdog driver
 - w83627hf_wdt: add quirk for Inves system
 - renesas_wdt: several improvements and document r8a774c0 support
 - mena21_wdt, mtx-1: Convert to use GPIO descriptor
 - bcm281xx, ie6xx_wdt: convert to DEFINE_SHOW_ATTRIBUTE
 - documentation: add PM usage and kernel-api: don't reference removed functions
 - update bindings for MT7629 SoC
 - several small fixes

* tag 'linux-watchdog-4.21-rc1' of git://www.linux-watchdog.org/linux-watchdog: (22 commits)
  watchdog: tqmx86: Add watchdog driver for the IO controller
  dt-bindings: watchdog: renesas-wdt: Document r8a774c0 support
  watchdog: docs: kernel-api: don't reference removed functions
  watchdog: add documentation for PM usage
  watchdog: mtx-1: Convert to use GPIO descriptor
  watchdog: mena21_wdt: Convert to GPIO descriptors
  dt-bindings: watchdog: Add Qualcomm PM8916 watchdog
  watchdog: Add pm8916 watchdog driver
  dt-bindings: watchdog: update bindings for MT7629 SoC
  watchdog: renesas_wdt: don't keep timer value during suspend/resume
  watchdog: ie6xx_wdt: convert to DEFINE_SHOW_ATTRIBUTE
  watchdog: bcm281xx: convert to DEFINE_SHOW_ATTRIBUTE
  watchdog: asm9260_wdt: make array mode_name static, shrinks object size
  watchdog/hpwdt: Update driver version.
  watchdog/hpwdt: Do not claim unsupported hardware
  watchdog/hpwdt: Exclude via blacklist
  Watchdog: remove outdated comment
  watchdog: w83627hf_wdt: Add quirk for Inves system
  watchdog: cpwd: add of_node_put()
  watchdog: renesas_wdt: don't set divider while watchdog is running
  ...
2019-01-01 13:16:45 -08:00
Eric Biggers 57b0e31453 KEYS: fix parsing invalid pkey info string
We need to check the return value of match_token() for Opt_err before
doing anything with it.

[ Not only did the old "-1" value for Opt_err cause problems for the
  __test_and_set_bit(), as fixed in commit 94c13f66e1 ("security:
  don't use a negative Opt_err token index"), but accessing
  "args[0].from" is invalid for the Opt_err case, as pointed out by Eric
  later.  - Linus ]

Reported-by: syzbot+a22e0dc07567662c50bc@syzkaller.appspotmail.com
Fixes: 00d60fd3b9 ("KEYS: Provide keyctls to drive the new key type ops for asymmetric keys [ver #2]")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: stable@kernel.org # 4.20
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-01 13:13:19 -08:00
Huazhong Tan e888402789 net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT
For HNAE3_DOWN_CLIENT calling hns3_nic_net_stop(), HNAE3_UP_CLIENT
should call hns3_nic_net_open(), since if the number of queue or
the map of TC has is changed before HHAE3_UP_CLIENT is called,
it will cause problem.

Also the HNS3_NIC_STATE_RESETTING flag needs to be cleared before
hns3_nic_net_open() called, and set it back while hns3_nic_net_open()
failed.

Fixes: bb6b94a896 ("net: hns3: Add reset interface implementation in client")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-01 12:13:44 -08:00
Willem de Bruijn cb9f1b7838 ip: validate header length on virtual device xmit
KMSAN detected read beyond end of buffer in vti and sit devices when
passing truncated packets with PF_PACKET. The issue affects additional
ip tunnel devices.

Extend commit 76c0ddd8c3 ("ip6_tunnel: be careful when accessing the
inner header") and commit ccfec9e5cb ("ip_tunnel: be careful when
accessing the inner header").

Move the check to a separate helper and call at the start of each
ndo_start_xmit function in net/ipv4 and net/ipv6.

Minor changes:
- convert dev_kfree_skb to kfree_skb on error path,
  as dev_kfree_skb calls consume_skb which is not for error paths.
- use pskb_network_may_pull even though that is pedantic here,
  as the same as pskb_may_pull for devices without llheaders.
- do not cache ipv6 hdrs if used only once
  (unsafe across pskb_may_pull, was more relevant to earlier patch)

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-01 12:05:02 -08:00
Willem de Bruijn 8c76e77f90 tap: call skb_probe_transport_header after setting skb->dev
The BPF flow dissector expects either skb->sk or skb->dev set on
all skbs. Delay flow dissection until after skb->dev is set.

This requires calling from within an rcu read-side critical section.
That is fine, see also the call from tun_xdp_one.

Fixes: d0e13a1488 ("flow_dissector: lookup netns by skb->sk if skb->dev is NULL")
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-01 12:01:02 -08:00
Cong Wang aff6db4545 ptr_ring: wrap back ->producer in __ptr_ring_swap_queue()
__ptr_ring_swap_queue() tries to move pointers from the old
ring to the new one, but it forgets to check if ->producer
is beyond the new size at the end of the operation. This leads
to an out-of-bound access in __ptr_ring_produce() as reported
by syzbot.

Reported-by: syzbot+8993c0fa96d57c399735@syzkaller.appspotmail.com
Fixes: 5d49de5320 ("ptr_ring: resize support")
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-01 11:58:33 -08:00
Takashi Iwai 3e9ad24b0e ALSA: hda - Revert DSP detection on legacy HD-audio driver
This essentially reverts the commits
  c337104b1a ("ALSA: HD-Audio: SKL+: abort probe if DSP is present
  and Skylake driver selected")
and
  d82b51c855 ("ALSA: HD-Audio: SKL+: force HDaudio legacy or SKL+
  driver selection")
for the path of legacy HD-audio controller (snd-hda-intel).

The automatic DSP detection and skip of binding with the legacy driver
caused regressions on several machines like Dell XPS13.  They give the
PCI class 0x40380 indicating the availability of DSP while they don't
work with ASoC SKL driver (yet).

As the support of ASoC driver for such devices isn't available, it's
better to revert the whole DSP-detection-and-skip behavior of the
legacy driver, so that we can get the old good driver working on such
devices.

The pci_binding option for ASoC SKL driver is still kept so that it
can work without blacklisting.

Fixes: c337104b1a ("ALSA: HD-Audio: SKL+: abort probe if DSP is present and Skylake driver selected")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Hans de Goede <hdegoede@redhat.com>
Reported-by: Azat Khuzhin <dohardgopro@gmail.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-01 20:43:01 +01:00
Zhu Yanjun 4087d2bc0d net: rds: remove unnecessary NULL check
In kfree, the NULL check is done.

Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-01 09:54:19 -08:00
yupeng 2b96547223 add document for TCP OFO, PAWS and skip ACK counters
add document and examples for below counters:
TcpExtTCPOFOQueue
TcpExtTCPOFODrop
TcpExtTCPOFOMerge
TcpExtPAWSActive
TcpExtPAWSEstab
TcpExtTCPACKSkippedSynRecv
TcpExtTCPACKSkippedPAWS
TcpExtTCPACKSkippedSeq
TcpExtTCPACKSkippedFinWait2
TcpExtTCPACKSkippedTimeWait
TcpExtTCPACKSkippedChallenge

Signed-off-by: yupeng <yupeng0921@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-01 09:51:14 -08:00
Deepa Dinamani 3a0ed3e961 sock: Make sock->sk_stamp thread-safe
Al Viro mentioned (Message-ID
<20170626041334.GZ10672@ZenIV.linux.org.uk>)
that there is probably a race condition
lurking in accesses of sk_stamp on 32-bit machines.

sock->sk_stamp is of type ktime_t which is always an s64.
On a 32 bit architecture, we might run into situations of
unsafe access as the access to the field becomes non atomic.

Use seqlocks for synchronization.
This allows us to avoid using spinlocks for readers as
readers do not need mutual exclusion.

Another approach to solve this is to require sk_lock for all
modifications of the timestamps. The current approach allows
for timestamps to have their own lock: sk_stamp_lock.
This allows for the patch to not compete with already
existing critical sections, and side effects are limited
to the paths in the patch.

The addition of the new field maintains the data locality
optimizations from
commit 9115e8cd2a ("net: reorganize struct sock for better data
locality")

Note that all the instances of the sk_stamp accesses
are either through the ioctl or the syscall recvmsg.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-01 09:47:59 -08:00
Xiaozhou Liu 8b6b25cf93 selftests/bpf: fix error printing in test_devmap()
As a simple fix, just print the correct map type.

Signed-off-by: Xiaozhou Liu <liuxiaozhou@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-01 13:48:59 +01:00
Sameer Pujar 63d2a9ec31 ALSA: hda/tegra: clear pending irq handlers
Even after disabling interrupts on the module, it could be possible
that irq handlers are still running. System hang is seen during
suspend path. It was found that, there were pending writes on the
HDA bus and clock was disabled by that time.

Above mentioned issue is fixed by clearing any pending irq handlers
before disabling clocks and returning from hda suspend.

Suggested-by: Mohan Kumar <mkumard@nvidia.com>
Suggested-by: Dara Ramesh <dramesh@nvidia.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-01 09:31:37 +01:00
Jian-Hong Pan 82b01149ec ALSA: hda/realtek: Enable the headset mic auto detection for ASUS laptops
The headset mic of ASUS laptops like UX533FD, UX433FN and UX333FA, whose
CODEC is Realtek ALC294 has jack auto detection feature. This patch
enables the feature.

Fixes: 4e05110673 ("ALSA: hda/realtek: Enable audio jacks of ASUS UX533FD with ALC294")
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-01 09:30:04 +01:00
Theodore Ts'o 191ce17876 ext4: fix special inode number checks in __ext4_iget()
The check for special (reserved) inode number checks in __ext4_iget()
was broken by commit 8a363970d1dc: ("ext4: avoid declaring fs
inconsistent due to invalid file handles").  This was caused by a
botched reversal of the sense of the flag now known as
EXT4_IGET_SPECIAL (when it was previously named EXT4_IGET_NORMAL).
Fix the logic appropriately.

Fixes: 8a363970d1 ("ext4: avoid declaring fs inconsistent...")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
2018-12-31 22:34:31 -05:00
Linus Torvalds e1ef035d27 ARM: SoC defconfig updates
Most changes here are to enable new drivers and platforms in the various
 configs that affect them. Most of these have been covered and described
 in the other branches, we mostly keep defconfig separate to avoid
 conflicts between SoC/dt/driver updates that they otherwise would be
 grouped with.
 
 One thing worth mentioning here is that OMAP changes from using their
 own UART driver, to 8250, for the multi_v7_defconfig shared config on
 32-bit. This means that the console is now named ttyS* instead of ttyO*.
 This change was already done for omap2_defconfig a while back, so most
 users of these configs have either already updated, or can easily follow
 the same patterns as they did at that time. This makes platform support
 slightly easier for distros, since they no longer need to keep track of
 a separate console prefix for these platforms.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlwqg+4PHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3nHcQAKrzSPsi3NWZHAIyP9Gcsu/mqebeB7ATnUVB
 EfsYl+0ZLwZjex2pI7YmDih4QgOui3caOYU3rlqcu+zTSXYp03GnzA/fuW/aOBr3
 Y4UYQcUIJULJyYzE14y5MhYxMfedF5U4yfayQj/6Xn4dojSICb19/CxD7lEtxUBQ
 DqYizTnR5ABRVDnRXmgo0TcHCSa05xP5Hn48DL02fJUc1oHzv3RoH2MrC4j4a2QO
 k0INYeq9cRFv9kcuz4S0VRXDvpA6cLsa9RZ8I3eJ+tpDFK8HmNyrij98CQLBwb/S
 UzuC+DvD5MdJsf6Tp15enXIKtLKBtEQiXVncX5dCFLGW+lfZb0FyMa6Q4herGEL3
 NLifwcxDwiATKJkGuQKJHhCnMVGanUz+fn+7nXbHtloOsR/2ttofaTFCCURN0Pr+
 oIa79JSd58SES+Rqz7V17r08SuK5iMjF8XENDMuim095WIt2ysoKW7P11eq/CjNf
 qheaiBK/ANHeYaVLb6OG7V5SMjsxWYcUfvwONiA5Qs1HbjiOXamUBOAiBF8zMBZc
 rd21X2kqVpfU/IDgqhWTEawtl76gh9+1uCbbL5l+qiwyFfRw0b/9pakMs3szgD+v
 2w49p/WwOQQoxzV5jCBlo36ZzKISrKGnTEQhRadtxCPPnrg/8emUNU6S/aHB2OmH
 x1Vehuja
 =65qL
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC defconfig updates from Olof Johansson:
 "Most changes here are to enable new drivers and platforms in the
  various configs that affect them. Most of these have been covered and
  described in the other branches, we mostly keep defconfig separate to
  avoid conflicts between SoC/dt/driver updates that they otherwise
  would be grouped with.

  One thing worth mentioning here is that OMAP changes from using their
  own UART driver, to 8250, for the multi_v7_defconfig shared config on
  32-bit. This means that the console is now named ttyS* instead of
  ttyO*. This change was already done for omap2_defconfig a while back,
  so most users of these configs have either already updated, or can
  easily follow the same patterns as they did at that time. This makes
  platform support slightly easier for distros, since they no longer
  need to keep track of a separate console prefix for these platforms"

* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits)
  Revert "arm64: defconfig: Enable FSL_MC_BUS and FSL_MC_DPIO"
  arm64: defconfig: Enable FSL_MC_BUS and FSL_MC_DPIO
  arm64: defconfig: Replace PINCTRL_MT7622 with PINCTRL_MTK_MOORE
  arm64: defconfig: Regenerate for v4.20
  ARM: multi_v7_defconfig: Add TOSHIBA TC358764 bridge driver
  ARM: multi_v7_defconfig: Add MAX8952 regulator driver
  ARM: exynos_defconfig: Add TOSHIBA TC358764 bridge driver
  ARM: exynos_defconfig: Add MAX8952 regulator driver
  ARM: exynos_defconfig: Add MAX8998 RTC and charger drivers
  ARM: imx_v6_v7_defconfig: add imx7ulp support
  ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX
  ARM: multi_v7_defconfig: enable STM32 analog & timer drivers
  arm64: defconfig: Enable GCC and PINCTRL for MSM8998
  arm64: defconfig: Enable core Qualcomm SDM845 options
  ARM: defconfig: Enable the PL111 DRM driver on vexpress
  ARM: defconfig: Update the vexpress defconfig
  arm64: defconfig: Enable some qcom remoteproc configs
  arm64: defconfig: Enable QCS404 configs
  ARM: imx_v6_v7_defconfig: Enable USB_ANNOUNCE_NEW_DEVICES
  ARM: imx_v6_v7_defconfig: Enable BT_BNEP
  ...
2018-12-31 17:40:14 -08:00
Linus Torvalds b7badd1d7a ARM: Device-tree updates
As usual, this is where the bulk of our changes end up landing each
 merge window.
 
 The individual updates are too many to enumerate, many many platforms
 have seen additions of device descriptions such that they are
 functionally more complete (in fact, this is often the bulk of updates
 we see).
 
 Instead I've mostly focused on highlighting the new platforms below as
 they are introduced. Sometimes the introduction is of mostly a fragment,
 that later gets filled in on later releases, and in some cases it's
 near-complete platform support. The latter is more common for derivative
 platforms that already has similar support in-tree.
 
 Two SoCs are slight outliers from the usual range of additions. Allwinner
 support for F1C100s, a quite old SoC (ARMv5-based) shipping in the
 Lychee Pi Nano platform. At the other end is NXP Layerscape LX2160A,
 a 16-core 2.2GHz Cortex-A72 SoC with a large amount of I/O aimed at
 infrastructure/networking.
 
 TI updates stick out in the diff stats too, in particular because they
 have moved the description of their L4 on-chip interconnect to devicetree,
 which opens up for removal of even more of their platform-specific
 'hwmod' description tables over the next few releases.
 
 SoCs:
  - Qualcomm QCS404 (4x Cortex-A53)
  - Allwinner T3 (rebranded R40) and f1c100s (armv5)
  - NXP i.MX7ULP (1x Cortex-A7 + 1x Cortex-M4)
  - NXP LS1028A (2x Cortex-A72), LX2160A (16x Cortex-A72)
 
 New platforms:
  - Rockchip: Gru Scarlet (RK3188 Tablet)
  - Amlogic: Phicomm N1 (S905D), Libretech S805-AC
  - Broadcom: Linksys EA6500 v2 Wi-Fi router (BCM4708)
  - Qualcomm: QCS404 base platform and EVB
  - Qualcomm: Remove of Arrow SD600
  - PXA: First PXA3xx DT board: Raumfeld
  - Aspeed: Facebook Backpack-CMM BMC
  - Renesas iWave G20D-Q7 (RZ/G1N)
  - Allwinner t3-cqa3t-bv3 (T3/R40) and Lichee Pi Nano (F1C100s)
  - Allwinner Emlid Neutis N5, Mapleboard MP130
  - Marvell Macchiatobin Single Shot (Armada 8040, no 10GbE)
  - i.MX: mtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva
  - VF610: Liebherr's BK4 device, ZII SCU4 AIB board
  - i.MX7D PICO Hobbit baseboard
  - i.MX7ULP EVK board
  - NXP LX2160AQDS and LX2160ARDB boards
 
 Other:
  - Coresight binding updates across the board
  - CPU cooling maps updates across the board
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlwqgVYPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3ybAQAKAhd7XI5oY/wgdZZmxwcX+p7sU6LXeIlpWU
 XsPN1c14KU0siQv/znVA5OpF+fgn9eRqfWnMoDPlvdScTq07FM2NBmOJfVJYDPJa
 uvsll5m+84FCYanIR//YybS0tCM0b0BHoHo2DoyIxWeAwmw7BBVslddBdNg6R7hG
 S9rU9rUeqfCj7HbcPLqVn0DecMtEe7R8zmDtG1CSMqrhncifmoV4gtUnbYAg0GGT
 cSvj/zT8A1j0oJcU2Upl/Fr+7WJ7XB9pnku91nUOSXLv5VkyctLGomKq5F7O2/Xs
 2DhpH2yKwQt7S7TDiDd0jy64Of6+Xup35wEHevCeKrzGXcVRqqHwCkanLz9FdjVt
 yg4UrI/P1nY7h4ifZPplgigv+kA+IjRGiMrTRIEgSE5YK9U5AYkgembTWksRDikd
 5EpeJcMj2tBv4SDellNNtzh6GGTPBf3GJw3P9uRuxnQY/T31N2eX0XGeRikL+Lzf
 9nbQdJealmql3rCa5oFEJwSxrSaAv/ub7/294kPdEmXj8+3qUuH3hZAZOI9LSXGW
 GCuxsgccB2GF1M48x48/QpHgxb93okyXmndONZnU8uN8ba0zS4b8QLwvIY5rqv5Z
 kqD1VPBQf9kGVyzDyABRjFmGCDJcoOJf4QrzvNk9+xo8fXVk1xNtxu4MUsHvc2lS
 cU2RYWm/
 =sFVi
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM Device-tree updates from Olof Johansson:
 "As usual, this is where the bulk of our changes end up landing each
  merge window.

  The individual updates are too many to enumerate, many many platforms
  have seen additions of device descriptions such that they are
  functionally more complete (in fact, this is often the bulk of updates
  we see).

  Instead I've mostly focused on highlighting the new platforms below as
  they are introduced. Sometimes the introduction is of mostly a
  fragment, that later gets filled in on later releases, and in some
  cases it's near-complete platform support. The latter is more common
  for derivative platforms that already has similar support in-tree.

  Two SoCs are slight outliers from the usual range of additions.
  Allwinner support for F1C100s, a quite old SoC (ARMv5-based) shipping
  in the Lychee Pi Nano platform. At the other end is NXP Layerscape
  LX2160A, a 16-core 2.2GHz Cortex-A72 SoC with a large amount of I/O
  aimed at infrastructure/networking.

  TI updates stick out in the diff stats too, in particular because they
  have moved the description of their L4 on-chip interconnect to
  devicetree, which opens up for removal of even more of their
  platform-specific 'hwmod' description tables over the next few
  releases.

  SoCs:
   - Qualcomm QCS404 (4x Cortex-A53)
   - Allwinner T3 (rebranded R40) and f1c100s (armv5)
   - NXP i.MX7ULP (1x Cortex-A7 + 1x Cortex-M4)
   - NXP LS1028A (2x Cortex-A72), LX2160A (16x Cortex-A72)

  New platforms:
   - Rockchip: Gru Scarlet (RK3188 Tablet)
   - Amlogic: Phicomm N1 (S905D), Libretech S805-AC
   - Broadcom: Linksys EA6500 v2 Wi-Fi router (BCM4708)
   - Qualcomm: QCS404 base platform and EVB
   - Qualcomm: Remove of Arrow SD600
   - PXA: First PXA3xx DT board: Raumfeld
   - Aspeed: Facebook Backpack-CMM BMC
   - Renesas iWave G20D-Q7 (RZ/G1N)
   - Allwinner t3-cqa3t-bv3 (T3/R40) and Lichee Pi Nano (F1C100s)
   - Allwinner Emlid Neutis N5, Mapleboard MP130
   - Marvell Macchiatobin Single Shot (Armada 8040, no 10GbE)
   - i.MX: mtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva
   - VF610: Liebherr's BK4 device, ZII SCU4 AIB board
   - i.MX7D PICO Hobbit baseboard
   - i.MX7ULP EVK board
   - NXP LX2160AQDS and LX2160ARDB boards

  Other:
   - Coresight binding updates across the board
   - CPU cooling maps updates across the board"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (648 commits)
  ARM: dts: suniv: Fix improper bindings include patch
  ARM: dts: sunxi: Enable Broadcom-based Bluetooth for multiple boards
  arm64: dts: allwinner: a64: bananapi-m64: Add Bluetooth device node
  ARM: dts: suniv: Fix improper bindings include patch
  arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller
  arm64: dts: Remove unused properties from FSL QSPI driver nodes
  ARM: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller
  ARM: dts: imx6sx-sdb: Fix the reg properties for the FSL QSPI nodes
  ARM: dts: Remove unused properties from FSL QSPI driver nodes
  arm64: dts: ti: k3-am654: Enable main domain McSPI0
  arm64: dts: ti: k3-am654: Add McSPI DT nodes
  arm64: dts: ti: k3-am654: Populate power-domain property for UART nodes
  arm64: dts: ti: k3-am654-base-board: Enable ECAP PWM
  arm64: dts: ti: k3-am65-main: Add ECAP PWM node
  arm64: dts: ti: k3-am654-base-board: Add I2C nodes
  arm64: dts: ti: am654-base-board: Add pinmux for main uart0
  arm64: dts: ti: k3-am65: Add pinctrl regions
  dt-bindings: pinctrl: k3: Introduce pinmux definitions
  ARM: dts: exynos: Specify I2S assigned clocks in proper node
  ARM: dts: exynos: Add missing CPUs in cooling maps for Odroid X2
  ...
2018-12-31 17:36:02 -08:00
Linus Torvalds d36377c6eb ARM: SoC driver updates
Misc driver updates for platforms, many of them power related.
 
  - Rockchip adds power domain support for rk3066 and rk3188
  - Amlogic adds a power measurement driver
  - Allwinner adds SRAM support for three platforms (F1C100, H5, A64 C1)
  - Wakeup and ti-sysc (platform bus) fixes for OMAP/DRA7
  - Broadcom fixes suspend/resume with Thumb2 kernels, and improves
    stability of a handful of firmware/platform interfaces
  - PXA completes their conversion to dmaengine framework
  - Renesas does a bunch of PM cleanups across many platforms
  - Tegra adds support for suspend/resume on T186/T194, which includes
    some driver cleanups and addition of wake events
  - Tegra also adds a driver for memory controller (EMC) on Tegra2
  - i.MX tweaks power domain bindings, and adds support for i.MX8MQ in GPC
  - Atmel adds identifiers and LPDDR2 support for a new SoC, SAM9X60
 
  + misc cleanups across several platforms
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlwqd4APHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3HXoP/icWJTGrbf9R6T7r0RWB3xeV8ouTPMM8YM5C
 6wD4LkkjgZ16Hz/ellJ0Oug77LdnJ/ZI7jH2u0IcKRXr4sL94hEo11jAJLLtCHpt
 rGiItMuEDMhNFcAK/yREI6FtRqjNZhsTuR+gkcjzMnGLCaTA1+RwQNdugH0hh0fF
 z8C6tjN+fRIeS0wInBzR/402GcgRU0DIJrr0kmklS0u6tc2QW24ffv8ymvMiVO46
 l8VemmdxVZsBU2iehraPy6mSXsyTm04dNTuHnrIw3nE3kTJF7jMvpqI/euU1eZl6
 6EzrrCym8nC66IlqhHMBB427PK8sRqJTqwqSXO6e90AqiK4H2bMovXKiob/Psq+e
 yWqPOrAr8YBLqTgauvCzVm/xneT5rZM4N0BYhOk172Uk52qenNWDnqHj41A4CMSM
 /id3L1cHs5nf2qwuMncXvLX+Y2vO2n6cMmF8cDRLu592OBZRcVepUM0xoaSdZScv
 LJsP3jH3RRcY3L2rf7bY2Mitp48bDgZMZdw/viSHsFS+SVr225uNFALFDQ9kNEoZ
 2d9i9IvC7xOMhdVAX03U7DuRcpKXBPcv+arA57PiVvR4M1HeU7VvD4ayP5loVX2J
 GoDIKiPQitAsOKzyPyZ5Jw04lxio3xZbrbmmVzEH8uKWIV5omdiMnSrFsEfduRCT
 rU+Mqe2j
 =yEX2
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "Misc driver updates for platforms, many of them power related.

   - Rockchip adds power domain support for rk3066 and rk3188

   - Amlogic adds a power measurement driver

   - Allwinner adds SRAM support for three platforms (F1C100, H5, A64
     C1)

   - Wakeup and ti-sysc (platform bus) fixes for OMAP/DRA7

   - Broadcom fixes suspend/resume with Thumb2 kernels, and improves
     stability of a handful of firmware/platform interfaces

   - PXA completes their conversion to dmaengine framework

   - Renesas does a bunch of PM cleanups across many platforms

   - Tegra adds support for suspend/resume on T186/T194, which includes
     some driver cleanups and addition of wake events

   - Tegra also adds a driver for memory controller (EMC) on Tegra2

   - i.MX tweaks power domain bindings, and adds support for i.MX8MQ in
     GPC

   - Atmel adds identifiers and LPDDR2 support for a new SoC, SAM9X60

  and misc cleanups across several platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
  ARM: at91: add support in soc driver for new SAM9X60
  ARM: at91: add support in soc driver for LPDDR2 SiP
  memory: omap-gpmc: Use of_node_name_eq for node name comparisons
  bus: ti-sysc: Check for no-reset and no-idle flags at the child level
  ARM: OMAP2+: Check also the first dts child for hwmod flags
  soc: amlogic: meson-clk-measure: Add missing REGMAP_MMIO dependency
  soc: imx: gpc: Increase GPC_CLK_MAX to 7
  soc: renesas: rcar-sysc: Fix power domain control after system resume
  soc: renesas: rcar-sysc: Merge PM Domain registration and linking
  soc: renesas: rcar-sysc: Remove rcar_sysc_power_{down,up}() helpers
  soc: renesas: r8a77990-sysc: Fix initialization order of 3DG-{A,B}
  dt-bindings: sram: sunxi: Add compatible for the A64 SRAM C1
  dt-bindings: sram: sunxi: Add bindings for the H5 with SRAM C1
  dt-bindings: sram: Add Allwinner suniv F1C100s
  soc: sunxi: sram: Add support for the H5 SoC system control
  soc: sunxi: sram: Enable EMAC clock access for H3 variant
  soc: imx: gpcv2: add support for i.MX8MQ SoC
  soc: imx: gpcv2: move register access table to domain data
  soc: imx: gpcv2: prefix i.MX7 specific defines
  dmaengine: pxa: make the filter function internal
  ...
2018-12-31 17:32:35 -08:00
Linus Torvalds 0922275ef1 ARM: SoC platform updates
SoC updates, mostly refactorings and cleanups of old legacy platforms,
 but also a few more things:
 
 New SoC support this release:
  - NXP/Freescale i.MX7ULP (1x Cortex-A7, Cortex-M4, graphics, etc)
  - Allwinner F1C100, older platform with an ARM926-EJS (ARMv5) core
 
 Cleanups of various platforms:
  - OMAP1 ams-delta does some GPIO cleanups
  - Davinci removes of at24 platform data
  - Samsung cleans up old wakeup, PM debug and secondary core boot code
  - Renesas moves around config options and PM code to drivers/soc for
    sharing with 64-bit and more consistency
  - i.MX, Broadcom and SoCFPGA all have tweaks to lowlevel debug console setups
  - SoCFPGA adds explicit selection of ARM errata and removes some unused code
 
 This tag also contains a few patches that I had queued up as fixes for
 4.20 but didn't send in before the release.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlwqdD8PHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3NQQP+gNhDCR01wy8EqmCuUn1nmoatnF9ViYER9yw
 tlWysax29ba5DGuSKkBCRooTDUNlVIMPdb7vE74CWoDVubexab67qFVJz+uRsXC5
 Gt/10STcU/i/Ga4bpkJxz47PfLHpVw1IwKUV1eoFWtLF7QQwfxiH8mr7vZj7XQo2
 3K95Adf13E6iIfbHcfBgEF0CjImUiZVq2E0DWMsE0Yti0ygVkNZeRXGHAUfQm/kD
 bBYOaHuuuiCXKp7dF9vzAC+iAqerudWYvxuHKPY0pU8T8hpj5P+UjGgCSeRdsLJz
 30MRr3t9WhPKvUYDVdIwsE5o1y1S2ZzO1FrTeRiJ8pem8PTliljXE3bIeTvu7uct
 n9lNquwvcjVutX7uYOesUmfGLGKQlCwwgg0l997OLe7/o9hzAdnptVvTciCVoanI
 r0ACjazbgIHGdb5rFLb5/Kkb+IqOc0d57CHiQacri1MN5zSQ9wLCZpXH8YEdibcI
 zY0DBlH2ga7Qh7rtlPi4I0gLNUG8jYclUwRbQYUKGlh0Bsv/J4abR49UC4byn2Vj
 kdEO1ASaNIwMJgBgSNAIoop/JhEnO+/ECJoB/pYCvNts6W/LckbMtPVhAofTIVTz
 B0pAexDPT4HW//vQ7iOmXraIeUi/HDTaT/64gWsoMnF6LntgcF79NDx4KJDXNRId
 Jra+EkHq
 =m7me
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm SoC platform updates from Olof Johansson:
 "SoC updates, mostly refactorings and cleanups of old legacy platforms,
  but also a few more things:

  New SoC support this release:
   - NXP/Freescale i.MX7ULP (1x Cortex-A7, Cortex-M4, graphics, etc)
   - Allwinner F1C100, older platform with an ARM926-EJS (ARMv5) core

  Cleanups of various platforms:
   - OMAP1 ams-delta does some GPIO cleanups
   - Davinci removes of at24 platform data
   - Samsung cleans up old wakeup, PM debug and secondary core boot code
   - Renesas moves around config options and PM code to drivers/soc for
     sharing with 64-bit and more consistency
   - i.MX, Broadcom and SoCFPGA all have tweaks to lowlevel debug
     console setups
   - SoCFPGA adds explicit selection of ARM errata and removes some
     unused code

  This also contains a few patches that I had queued up as fixes for
  4.20 but didn't send in before the release"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits)
  arm64: dts: renesas: draak: Fix CVBS input
  ARM: omap2: avoid section mismatch warning
  ARM: tegra: avoid section mismatch warning
  ARM: ks8695: fix section mismatch warning
  ARM: pxa: avoid section mismatch warning
  ARM: mmp: fix pxa168_device_usb_phy use on aspenite
  ARM: mmp: fix timer_init calls
  ARM: OMAP1: fix USB configuration for device-only setups
  ARM: OMAP1: add MMC configuration for Palm Tungsten E
  ARM: imx: fix dependencies on imx7ulp
  ARM: meson: select HAVE_ARM_TWD and ARM_GLOBAL_TIMER
  MAINTAINERS: add drivers/soc/amlogic/ to amlogic list
  ARM: imx: add initial support for imx7ulp
  ARM: debug-imx: only define DEBUG_IMX_UART_PORT if needed
  ARM: dts: Fix OMAP4430 SDP Ethernet startup
  ARM: dts: am335x-pdu001: Fix polarity of card detection input
  ARM: OMAP1: ams-delta: Fix audio permanently muted
  ARM: dts: omap5: Fix dual-role mode on Super-Speed port
  arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios
  ARM: davinci: da850-evm: remove unnecessary include
  ...
2018-12-31 17:27:54 -08:00
Tyrel Datwyler 756af9c642 ibmveth: fix DMA unmap error in ibmveth_xmit_start error path
Commit 33a48ab105 ("ibmveth: Fix DMA unmap error") fixed an issue in the
normal code path of ibmveth_xmit_start() that was originally introduced by
Commit 6e8ab30ec6 ("ibmveth: Add scatter-gather support"). This original
fix missed the error path where dma_unmap_page is wrongly called on the
header portion in descs[0] which was mapped with dma_map_single. As a
result a failure to DMA map any of the frags results in a dmesg warning
when CONFIG_DMA_API_DEBUG is enabled.

------------[ cut here ]------------
DMA-API: ibmveth 30000002: device driver frees DMA memory with wrong function
  [device address=0x000000000a430000] [size=172 bytes] [mapped as page] [unmapped as single]
WARNING: CPU: 1 PID: 8426 at kernel/dma/debug.c:1085 check_unmap+0x4fc/0xe10
...
<snip>
...
DMA-API: Mapped at:
ibmveth_start_xmit+0x30c/0xb60
dev_hard_start_xmit+0x100/0x450
sch_direct_xmit+0x224/0x490
__qdisc_run+0x20c/0x980
__dev_queue_xmit+0x1bc/0xf20

This fixes the API misuse by unampping descs[0] with dma_unmap_single.

Fixes: 6e8ab30ec6 ("ibmveth: Add scatter-gather support")
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-31 15:40:11 -08:00
Stefan Wahren 4d9226fd9a arm64: defconfig: Re-enable bcm2835-thermal driver
The bcm2835-thermal driver was added with commit ac178e4280
("ARM64: bcm2835: add thermal driver to default config"). Unfortunately
this was accidentally dropped by commit eb1e6716cc
("arm64: defconfig: sync with savedefconfig"). So enable the driver again.

Fixes: eb1e6716cc ("arm64: defconfig: sync with savedefconfig")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-31 13:16:40 -08:00
Olof Johansson 2081076ac7 Highlights:
-----------
 - Following pen_release and boot_lock cleanup initiated by
   Russell King, .smp_prepare_cpus and .smp_boot_secondary STi callbacks
   must be reworked to keep secondary CPU's bringup.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJcG50AAAoJEMrHeC97M/+m1CMP+wYY5OagpvTabaJ5AJZA68Jn
 vLqGrrfch5XxaGe9OL5bxk0ndv3mmyD4ydAD9EwJBzwSbjM7QKH0E+8pTZcLVc2z
 i3R54Wdd49m2vX7NFPEZF/dMS+AZ+C7cmWiGYrNyJxktXPaTzhO5XwXoRr2yUyBV
 MBw4qOyhwqRPWGuEud0FTqXpQ46zoVFIwXDcMHwdvM1CyPiNCzYqFzyyy28RXqhX
 pr3VWHw9nRA7+1XqUVrU81Uu/Fyk/pidpmngM7xsG1NzdmZu6s//LlWoGRuH9u7k
 a6jiZ94HC5tmGoA3Fx32b95hS2eWvjewIDzj48t6kuzJjCDzwQOXGoOLunQUuY/8
 jcg0BF+0d5Efq9GKXVJaZ4XHt15XomwG+CDsjhDyU3HDBN1muB8rF7/2oXzAc4NL
 D+OGebnrCZlWlFM8YpWcYc/2tZBoT2DhtpuiKFHe6ExLIw/dqk2KilFzghisyHt/
 lZh21JJtqVTEcd2GaQVALbQlcJZj8VaRVVGjdniuysqdMBoMCfT4hAzIVzXjybzK
 qUrmR7wRAiidI0URCXPaMhhRGmvZbssQiPA8aI6LCauAkxuPDOFPfkDn+eX5KsXn
 SqPlfDNOEfEPz4gJOAclVRV/1kBBLmAe/iIE39Z5Gy8A9cNMdqn1KxrrEjSUJcwU
 GXzUvpyajj04OGCM2InI
 =QbVn
 -----END PGP SIGNATURE-----

Merge tag 'sti-soc-for-v4.21-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into next/late

Highlights:
-----------
- Following pen_release and boot_lock cleanup initiated by
  Russell King, .smp_prepare_cpus and .smp_boot_secondary STi callbacks
  must be reworked to keep secondary CPU's bringup.

* tag 'sti-soc-for-v4.21-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
  ARM: sti: remove pen_release and boot_lock

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-31 13:12:02 -08:00
Olof Johansson 8a66c20e66 Samsung DTS ARM64 changes for v4.21, part 2
Add IMEM clock controller (for Security SubSystem) and Bluetooth chip to
 Exynos5433 TM2(e) boards.
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAlwZUDoQHGtyemtAa2Vy
 bmVsLm9yZwAKCRDBN2bmhouD1w6DD/0Uew7/eRS16gt6EChKidNjbMsAeMoe790n
 +CxlMEcopK4Eab1q0gftu1D++nTNHD0k6jxYLNQgKqg+zovDg/csYZiLX4F6W1Re
 jSWNXUQvoTXKc85MvCJW2tpo5if9rEJLm+OBDSL4ih524SMzPvySp9eRFNKP7jy3
 PPgdkwkXiCtRhzIIGa/fWxYhbkJ//k6poKFRPgVwQbcqKhbRLsHZCXRe7NRzTejU
 o8hGonjoekrou9JRR0jC82qNOan3vrAH//aAZJNlYdpjRC+tW/iGMLXK9wfPMQGO
 I1SaMETdfEES+uORqaVhcz778rCoBtj9jk9S2QnKLUhpLV6d+RcLHUMkXBQ3A9ZX
 EgtuzGcedcQHQiHvn0OBwOJYfY2cmQ+cQMWgL2jiETqlJD7bpAl8Zsv5rjZ/+vdI
 WGPC/4NSukbS8Va8gqqkLs6UElSJlV18NUayBqSPDvH2UMMSwn/ILV39fSxVpG/0
 y1Tu2cpsMMwapHv3zC6RigvWZkOMx5DwD0TJg43iyCvvVhmo+9JV/GWhe7wM0ymX
 29GL2F6PmIzpzAa3HdNeS7iAqYWmMvZ5e2c+6gvc0LGoP+QO2a2eRH8sy+iVF5JU
 uk8BZbXFfVeKU+K71Z83fm0zpQZY2GD9GJZYwEKVfQ0wGoXtjeJ5iQhWPohCC15V
 coWHMUKp2A==
 =JVh0
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt64-4.21-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/late

Samsung DTS ARM64 changes for v4.21, part 2

Add IMEM clock controller (for Security SubSystem) and Bluetooth chip to
Exynos5433 TM2(e) boards.

* tag 'samsung-dt64-4.21-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: Add Bluetooth chip to TM2(e) boards
  arm64: dts: exynos: Add IMEM clock controller to Exynos5433
  arm64: dts: exynos: Add all CPUs in cooling maps
  arm64: dts: exynos: Update DWC3 modules on Exynos5433 SoCs

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-31 13:11:04 -08:00
Olof Johansson c6f9fa88a3 Samsung DTS ARM changes for v4.21, part 2
1. Add missing CPUs in cooling maps for Odroid X2 (missed in previous
    round of fixups).
 2. Fix clock configuration in audio subsystem on Odroid XU3/XU4.
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAlwZT90QHGtyemtAa2Vy
 bmVsLm9yZwAKCRDBN2bmhouD1+TxD/9eHjeon87f2f61FlO+u9+gN+kSwn1hwSj+
 bsz6GG0CuG5WWX5Lr8K5Uu+wtxEOfN4d1VoMH7rFiznkGxE5YpZc0hiK1qwsKtos
 E8IAAFjC+C4DpH8q1mojF9pSnLVpn+BFXsfR1JI4hgxrfwTKWJ8BJaNFdWOfFsyG
 1UduKVXgftnSF+iSVeX5vTRsQpBKPlm/5/ULhPyvJ+la9LzE6ZJ0E8hW3EgLtzQx
 T5BPyZlrd48EJHinO5imBy+h5z5Ca7Hg23twtBJC4ei0Zbc7KHXY6xxpKab7qLcs
 Zzs29R3PyNuOg1RTzZsIA+RxiytbRNjHhuPaP8XQa0i9WxkMgRRG7ITn2L4hLYvb
 ufME4mnQ4K8hCooV96gJvfzy9T5NYrNnmcKKnNLeAkcWHV/nXEyPVGXUYVMwTdev
 Zs9FWfn1E2fjCGu0sHp+PMQZXarEI0uC7tOnGROOHHKIxaH2Pf2OltVfJhGg29yu
 4+JCVJju/G328RfYgjb/GDoU1WHl+5mhs0NQxjxdG6cV83K7sNeUMMv+2se5NlRD
 xZYEAovzGogcOrOc1NlNzOQBwZlXdtFVz45em6qRFPomURgtLQuMZWSpPscRvajH
 Pn0FPK2ah80n8rSeHWx3nNuuUZcGT1g1muM3zxshNy+jOHwHzyM8Gp5fjrNQzZ4Q
 93jGdUPmMw==
 =dIrg
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt-4.21-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/late

Samsung DTS ARM changes for v4.21, part 2

1. Add missing CPUs in cooling maps for Odroid X2 (missed in previous
   round of fixups).
2. Fix clock configuration in audio subsystem on Odroid XU3/XU4.

* tag 'samsung-dt-4.21-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Specify I2S assigned clocks in proper node
  ARM: dts: exynos: Add missing CPUs in cooling maps for Odroid X2
  ARM: dts: exynos: remove display-port node from Arndale
  ARM: dts: exynos: Add opp-suspend to DMC and leftbus devfreq OPPs on Exynos4
  ARM: dts: s5pv210: Add s5p-jpeg codec node.
  ARM: dts: exynos: Use Samsung SoC specific compatible for DWC2 module
  ARM: dts: exynos: Add all CPUs in cooling maps
  ARM: dts: exynos: Clarify comment explaining purpose of Odroid XU3 DTSI
  ARM: dts: exynos: Add pin configuration for SD write protect on Odroid XU3/XU4/HC1
  ARM: dts: exynos: Update maximum frequency for eMMC to 200MHz on Odroid XU3/XU4
  ARM: dts: exynos: Update maximum frequency for SD card to 200MHz on Odroid XU3/XU4/HC1
  ARM: dts: exynos: Fix LDO13 min values on Odroid XU3/XU4/HC1
  ARM: dts: exynos: Add UHS-I bus speed support to Odroid XU3/XU4/HC1
  ARM: dts: exynos: Add missing clocks to RTC node for Arndale board
  ARM: dts: exynos: Add compatible for s5m8767 clocks node on Itop Core
  ARM: dts: exynos: Add compatible for s2mps11 clocks node on Exynos542x

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-31 13:10:16 -08:00
Manivannan Sadhasivam a684afa7b1 MAINTAINERS: Add entry for RDA Micro SoC architecture
Add MAINTAINERS entry for RDA Micro SoC architecture with myself
as the maintainer.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-31 13:10:04 -08:00
Manivannan Sadhasivam c10b13325c tty: serial: Add RDA8810PL UART driver
Add UART driver for RDA Micro RDA8810PL SoC.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-31 13:10:01 -08:00
Manivannan Sadhasivam 6fc66a5c68 ARM: dts: rda8810pl: Add interrupt support for UART
Add interrupt support for UART in RDA Micro RDA8810PL SoC.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-31 13:09:58 -08:00
Andreas Färber 804584a61c dt-bindings: serial: Document RDA Micro UART
Add an initial binding for the UART in RDA Micro RDA8810PL SoC.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-31 13:09:51 -08:00
Manivannan Sadhasivam 5a9fe404b9 ARM: dts: rda8810pl: Add timer support
Add timer support for RDA Micro RDA8810PL SoC.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-31 13:09:49 -08:00
Manivannan Sadhasivam 7581d836bd ARM: dts: Add devicetree for OrangePi i96 board
Add initial devicetree for Orange Pi i96 board from Xunlong. It
is one of the 96Boards IoT Edition board.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-31 13:09:46 -08:00
Manivannan Sadhasivam f0d319d26e ARM: dts: Add devicetree for OrangePi 2G IoT board
Add initial devicetree support for OrangePi 2G IoT board from Xunlong.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-31 13:09:44 -08:00
Manivannan Sadhasivam 542e1c9dba ARM: dts: Add devicetree for RDA8810PL SoC
Add initial device tree for RDA8810PL SoC from RDA Microelectronics.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-31 13:09:41 -08:00
Andreas Färber 78e3dbc166 ARM: Prepare RDA8810PL SoC
Introduce ARCH_RDA and mach-rda for RDA Micro SoCs.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-31 13:09:39 -08:00
Andreas Färber 56f73e4bc1 dt-bindings: arm: Document RDA8810PL and reference boards
Add bindings for RDA Micro RDA8810PL SoC and below reference boards:

1. Orange Pi 2G-IoT - http://www.orangepi.org/OrangePi2GIOT/
2. Orange Pi i96 - https://www.96boards.org/product/orangepi-i96/

Cc: zhao_steven@263.net
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-31 13:09:36 -08:00
Andreas Färber 1def98f698 dt-bindings: Add RDA Micro vendor prefix
Add vendor prefix for RDA Micro which now merged into Unisoc
Communications Inc.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-31 13:09:33 -08:00
Olof Johansson a2edaf7893 i.MX8MQ device tree support for 4.21:
- It contains the initial device tree support for i.MX8MQ - the first
    ARM64 i.MX processor.  It features a quad Cortex-A53 core that
    operates at speeds of up to 1.3 GHz, a Cortex-M4 core for
    low-power processing, a DRAM controller that supports 32-bit/16-bit
    LPDDR4/DDR4/DDR3L memory, and hardware acceleration for 4K video
    playback.
  - A couple of patches from Baruch that add watchdog device for i.MX8MQ
    enable it for imx8mq-evk board.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJcFjGjAAoJEFBXWFqHsHzOqtcIAJqypaN00zz50FHWeZG3Z6qK
 lcaseee6AMTxBZRpQdU1sZoONQ3Q4azlV4KJk/XZqCso6pqYkCc3yLrTb4y1YlBu
 usH9Ap66KkqUXjT6239bysxOAxL73wV8ekn+al52PAcjEuYAWzmKoIbnRWijyZaE
 BaLXpEInQxh8GhM7CddCZV6xbNem+d9zOm0YE46YltgZdfJGgxrTxdnWyC/8uGrX
 FK+mnjaxjWa6gsnYf4PpYXZowpzsq1MOY1Hwk8snfSJPTA3wxus9VRIyEL2KalS+
 mQ5pWwL1naRloQAa3/VLmp69+7B4MXnh0ws7WZmh/BB1JxZIes4RSE1jp1hWMJI=
 =OAS0
 -----END PGP SIGNATURE-----

Merge tag 'imx8mq-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/late

i.MX8MQ device tree support for 4.21:
 - It contains the initial device tree support for i.MX8MQ - the first
   ARM64 i.MX processor.  It features a quad Cortex-A53 core that
   operates at speeds of up to 1.3 GHz, a Cortex-M4 core for
   low-power processing, a DRAM controller that supports 32-bit/16-bit
   LPDDR4/DDR4/DDR3L memory, and hardware acceleration for 4K video
   playback.
 - A couple of patches from Baruch that add watchdog device for i.MX8MQ
   enable it for imx8mq-evk board.

* tag 'imx8mq-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: imx8mq-evk: enable watchdog
  arm64: dts: imx8mq: add watchdog devices
  MAINTAINERS: add i.MX8 DT path to i.MX architecture
  arm64: add support for i.MX8M EVK board
  arm64: add basic DTS for i.MX8MQ
  arm64: add basic Kconfig symbols for i.MX8
  arm64: dts: ls1046a: add qdma device tree nodes
  arm64: dts: ls1043a: add qdma device tree nodes
  arm64: dts: ls1088a: Add missing dma-ranges property
  arm64: dts: ls1088a: Move fsl-mc node
  arm64: dts: fsl: Add all CPUs in cooling maps
  arm64: dts: Add support for NXP LS1028A SoC
  arm64: dts: layerscape: removed compatible string "snps,dw-pcie"
  arm64: dts: fsl: Add the status property disable PCIe
  arm64: dts: ls1012a: Add FRWY-LS1012A board support
  dt-bindings: Add binding for i.MX8MQ CCM
  arm64: dts: add LX2160AQDS board support
  arm64: dts: add LX2160ARDB board support
  arm64: dts: add QorIQ LX2160A SoC support

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-31 13:07:31 -08:00
Olof Johansson 5e0bd98f8c OP-TEE dynamic shm log message
Adds a log message in the OP-TEE driver to inform that dynamic shared
 memory is enabled.
 -----BEGIN PGP SIGNATURE-----
 
 iQJOBAABCgA4FiEEcK3MsDvGvFp6zV9ztbC4QZeP7NMFAlwPxtcaHGplbnMud2lr
 bGFuZGVyQGxpbmFyby5vcmcACgkQtbC4QZeP7NOSWBAAgBTBOCGM28NeUPLh4xfX
 R7GdWF7XAyepWvAUCMNjbE5F5hsME4j/e+yhRiNjy14e0TKlpW4S/u0JkEyUwOPN
 dwyPicS5+6zHd5HC/bUhsLk6zhXo0W9NTq/fWUCyclCI6A0HMRQaDUgAARYjf6l0
 7A63gwudCIBRLFHdPiXd7Q79sdxmjwXUxy80Eu8kK+ZPPZfmdxue7Hm2ZZVry9Vx
 0mGUR8WreuBc6ls7CNJBSO0x0+RHkqDQCqCXI8NtNH7MQQYPutllII7pcSAzb5kS
 8VrXWjXF5o5tsdhpZ9PVjhCkpmvQg/OihaEirTGuy5U0hfO+bp2hOpX5piSzGHUT
 wf/GYgYagFyvH10ArEdgp0I4LeyqS21DuDFUGgR2I/RJg6gV4WPyj1RwOgRkW28r
 jS24UN6vEQQ+RNcle2xc7yTJEGzhJCuU4NNDOykBMUu+S1+Tg9lFrfdw4VyYxFdK
 YenbhxLbTdSIUCzHYI83nxATWfYAFjj61cA/ljRR5gIpAm1TU0bJ8/b6MVk86wiy
 SEW0xLm5FTRzybE7h1v72paWfmCxoejDItsBNlso4GCE9IbQO16UiNsqLD3p6il5
 /h1WefaRIkWfKTJ4iqjOx8dj/zWa3iYFH+LMG5H4Jo51wWl8J2UFh+doI1SfcFE7
 2NkVXBvbqhcHl9xP+LZl20Q=
 =NJ/O
 -----END PGP SIGNATURE-----

Merge tag 'tee-subsys-optee-for-4.21' of https://git.linaro.org/people/jens.wiklander/linux-tee into next/late

OP-TEE dynamic shm log message

Adds a log message in the OP-TEE driver to inform that dynamic shared
memory is enabled.

* tag 'tee-subsys-optee-for-4.21' of https://git.linaro.org/people/jens.wiklander/linux-tee:
  tee: optee: log message if dynamic shm is enabled

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-31 13:06:30 -08:00
Olof Johansson 6ae284ab58 Avoid possible double list_del in supplicant comms
A fix for the OP-TEE driver to avoid possible double list_del during
 tee-supplicant communication while the system is shutting down.
 -----BEGIN PGP SIGNATURE-----
 
 iQJOBAABCgA4FiEEcK3MsDvGvFp6zV9ztbC4QZeP7NMFAlwPyB8aHGplbnMud2lr
 bGFuZGVyQGxpbmFyby5vcmcACgkQtbC4QZeP7NNm7BAAvxkI/fvhWdWbBbu9E850
 m61XN7pqU171YmPnQeOLgYB0r7v7EJvw7CW2lIcWKXGzQYKZkDtnUD3U6dK0LLzU
 xFJbnQzD/oe28Ed3Q7IHscQs+GbGwqcGlLulGPQwhkEG1ubabbw7694phxXhkUu7
 kfPfoW+J9DRpSAihpU5JCKms5cSdvSirRzO/Rg5mxzQrjeZ/dMjdJM65H/w5qpOw
 mzCn9PxJzDNWCQpSR7OSVsKCqtKWKAQnoP7oT0ED9RSXtynWKx4yMT2Yikp4MG4V
 X5bxHPYxXb9Rso8xXF69/2u5FPAY9hQ7RgDrKVNOTDiNMPrxNYWIjsNrcihHKjOk
 cwcPiVw2LTlNQdUt6+NNDxSSKpzCaptxLmYAHgNm9zRlQw6n6XXz1AuuZux0BAqH
 2xEKbEFZ1PB/rWOkbD5Y4ZiebKVBEtY4VFQxFOcNVKtm/Ot9JvEQ8wBdOtkQBh3h
 gsCqwXtsRsbO4iLo8BhHsZnusT9MUYvVCyxQ0n9lOusTNX4l4TnadfNFn2B2nifx
 mKIK5P1zl6b3fWq84Cb1v5WEkJqM9iPxt0DFzhkp+4tHB5BSzDW4xrQJshRPiv4C
 Z3PfVnXsARxM6QpAGQzjYai/QO9Nzf76TBBiiD3ggFXI0ZU0v4RpztW0kP8ilqHO
 NVoGZOa+s+qgrm+chmPtxYo=
 =c05b
 -----END PGP SIGNATURE-----

Merge tag 'tee-subsys-fix-for-4.21' of https://git.linaro.org/people/jens.wiklander/linux-tee into next/late

Avoid possible double list_del in supplicant comms

A fix for the OP-TEE driver to avoid possible double list_del during
tee-supplicant communication while the system is shutting down.

* tag 'tee-subsys-fix-for-4.21' of https://git.linaro.org/people/jens.wiklander/linux-tee:
  tee: optee: avoid possible double list_del()

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-31 13:05:53 -08:00
Olof Johansson cac1fc8fb5 Merge branch 'fixes' into next/soc
Merge in fixes here, since the last batch didn't make it in before the
release of 4.20, and we might as well group them with this set of
patches.

* fixes: (822 commits)
  arm64: dts: renesas: draak: Fix CVBS input
  ARM: dts: Fix OMAP4430 SDP Ethernet startup
  ARM: dts: am335x-pdu001: Fix polarity of card detection input
  ARM: OMAP1: ams-delta: Fix audio permanently muted
  ARM: dts: omap5: Fix dual-role mode on Super-Speed port
  arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios
  ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock
  ARM: imx: update the cpu power up timing setting on i.mx6sx
  Revert "arm64: dts: marvell: add CPU Idle power state support on Armada 7K/8K"
  ARM: dts: imx7d-pico: Describe the Wifi clock
  ARM: dts: realview: Fix some more duplicate regulator nodes
  MAINTAINERS: update entry for MMP platform
  ARM: mmp/mmp2: fix cpu_is_mmp2() on mmp2-dt
  MAINTAINERS: mediatek: Update SoC entry
  ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs
  + Linux 4.20-rc5

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-31 11:54:03 -08:00
Linus Torvalds 495d714ad1 Tracing changes for v4.21:
- Rework of the kprobe/uprobe and synthetic events to consolidate all
    the dynamic event code. This will make changes in the future easier.
 
  - Partial rewrite of the function graph tracing infrastructure.
    This will allow for multiple users of hooking onto functions
    to get the callback (return) of the function. This is the ground
    work for having kprobes and function graph tracer using one code base.
 
  - Clean up of the histogram code that will facilitate adding more
    features to the histograms in the future.
 
  - Addition of str_has_prefix() and a few use cases. There currently
    is a similar function strstart() that is used in a few places, but
    only returns a bool and not a length. These instances will be
    removed in the future to use str_has_prefix() instead.
 
  - A few other various clean ups as well.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXCawlBQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qhbcAQCFeT0fWWTUxofBQz5jqsHaRnVg21+9
 X4sTldYRYEn4YgEAmWOyiwq7zvrsAu4ZwkNBMeqxn3tVymYHiGOGe3Y4BAw=
 =u96o
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:

 - Rework of the kprobe/uprobe and synthetic events to consolidate all
   the dynamic event code. This will make changes in the future easier.

 - Partial rewrite of the function graph tracing infrastructure. This
   will allow for multiple users of hooking onto functions to get the
   callback (return) of the function. This is the ground work for having
   kprobes and function graph tracer using one code base.

 - Clean up of the histogram code that will facilitate adding more
   features to the histograms in the future.

 - Addition of str_has_prefix() and a few use cases. There currently is
   a similar function strstart() that is used in a few places, but only
   returns a bool and not a length. These instances will be removed in
   the future to use str_has_prefix() instead.

 - A few other various clean ups as well.

* tag 'trace-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (57 commits)
  tracing: Use the return of str_has_prefix() to remove open coded numbers
  tracing: Have the historgram use the result of str_has_prefix() for len of prefix
  tracing: Use str_has_prefix() instead of using fixed sizes
  tracing: Use str_has_prefix() helper for histogram code
  string.h: Add str_has_prefix() helper function
  tracing: Make function ‘ftrace_exports’ static
  tracing: Simplify printf'ing in seq_print_sym
  tracing: Avoid -Wformat-nonliteral warning
  tracing: Merge seq_print_sym_short() and seq_print_sym_offset()
  tracing: Add hist trigger comments for variable-related fields
  tracing: Remove hist trigger synth_var_refs
  tracing: Use hist trigger's var_ref array to destroy var_refs
  tracing: Remove open-coding of hist trigger var_ref management
  tracing: Use var_refs[] for hist trigger reference checking
  tracing: Change strlen to sizeof for hist trigger static strings
  tracing: Remove unnecessary hist trigger struct field
  tracing: Fix ftrace_graph_get_ret_stack() to use task and not current
  seq_buf: Use size_t for len in seq_buf_puts()
  seq_buf: Make seq_buf_puts() null-terminate the buffer
  arm64: Use ftrace_graph_get_ret_stack() instead of curr_ret_stack
  ...
2018-12-31 11:46:59 -08:00
Linus Torvalds f12e840c81 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha
Pull alpha architecture updates from Matt Turner:
 "A few small changes for alpha as well as the new system call table
  generation support from Firoz Khan"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
  alpha: Remove some unused variables
  alpha: rtc: simplify alpha_rtc_init
  alpha: Fix a typo on ptrace.h
  alpha: fix spelling mistake QSD_PORT_ACTUVE -> QSD_PORT_ACTIVE
  alpha: generate uapi header and syscall table header files
  alpha: add system call table generation support
  alpha: add __NR_syscalls along with NR_SYSCALLS
  alpha: remove CONFIG_OSF4_COMPAT flag from syscall table
  alpha: move __IGNORE* entries to non uapi header
2018-12-31 09:57:14 -08:00