[Why]
EDID emulation didn't work properly for linux, as we stop programming
if nothing is connected physically.
[How]
We get a flag from DRM when we want to do edid emulation. We check if
this flag is true and nothing is connected physically, if so we only
program the front end using VIRTUAL_SIGNAL.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There have been a few reports of Vega10 display remaining blank
after S3 resume. The regression is caused by workaround for mode
change on Vega10 - skip set_bandwidth if stream count is 0.
As a result we skipped dispclk reset on suspend, thus on resume
we may skip the clock update assuming it hasn't been changed.
On some systems it causes display blank or 'out of range'.
[How]
Revert "drm/amd/display: Fix Vega10 black screen after mode change"
Verified that it hadn't cause mode change regression.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The vce cancel_delayed_work_sync never be called.
driver call the function in error path.
This caused the A+A suspend hang when runtime pm enebled.
As we will visit the smu in the idle queue. this will cause
smu hang because the dgpu has been suspend, and the dgpu also
will be waked up. As the smu has been hang, so the dgpu resume
will failed.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This reverts commit 0c08754b59.
commit 0c08754b59
("drm/panel: Add device_link from panel device to DRM device")
creates a circular dependency under these circumstances:
1. The panel depends on dsi-host because it is MIPI-DSI child
device.
2. dsi-host depends on the drm parent device (connector->dev->dev)
this should be allowed.
3. drm parent dev (connector->dev->dev) depends on the panel
after this patch.
This makes the dependency circular and while it appears it
does not affect any in-tree drivers (they do not seem to have
dsi hosts depending on the same parent device) this does not
seem right.
As noted in a response from Andrzej Hajda, the intent is
likely to make the panel dependent on the DRM device
(connector->dev) not its parent. But we have no way of
doing that since the DRM device doesn't contain any
struct device on its own (arguably it should).
Revert this until a proper approach is figured out.
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927124130.9102-1-linus.walleij@linaro.org
one fix to get a proper DMA configuration in place for the etnaviv
virtual device. I'm sending this as a fix, as a dma-mapping change at
the ARC architecture side during the 4.19 cycle broke etnaviv on this
platform, which gets remedied with this patch, but it also enables
ARM64.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/ea1f712bf09bf9439c6b092bf2c2bde7bb01cf5e.camel@pengutronix.de
We attempt to get fences earlier in the hopes that everything will
already have fences and no callbacks will be needed. If we do succeed
in getting a fence, getting one a second time will result in a duplicate
ref with no unref. This is causing memory leaks in Vulkan applications
that create a lot of fences; playing for a few hours can, apparently,
bring down the system.
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107899
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926071703.15257-1-jason.ekstrand@intel.com
When we want to writeback to memory in NV12 format we need to program
the RGB2YUV coefficients. Currently, we don't program the coefficients
and NV12 doesn't work at all.
This patchset fixes that by programming a sane default(bt709, limited
range) as rgb2yuv coefficients.
In the long run, probably we need to think of a way for userspace to
be able to program that, but for now I think this is better than not
working at all or not advertising NV12 as a supported format for
memwrite.
Changes since v1:
- Write the rgb2yuv coefficients only once, since we don't change
them at all, just write them the first time NV12 is programmed,
suggested by Brian Starkey, here [1]
[1] https://lists.freedesktop.org/archives/dri-devel/2018-August/186819.html
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Currently, if userspace calls drm_wait_vblank before the crtc is
activated the crtc vblank_enable hook is called, which in case of
malidp driver triggers some warninngs. This happens because on
device init we don't inform the drm core about the vblank state
by calling drm_crtc_vblank_on/off/reset which together with
drm_vblank_get have some magic that prevents calling drm_vblank_enable
when crtc is off.
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
-----BEGIN PGP SIGNATURE-----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=56tH
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2018-09-21' of git://anongit.freedesktop.org/drm/drm
David writes:
"drm fixes for 4.19-rc5:
- core: fix debugfs for atomic, fix the check for atomic for
non-modesetting drivers
- amdgpu: adds a new PCI id, some kfd fixes and a sdma fix
- i915: a bunch of GVT fixes.
- vc4: scaling fix
- vmwgfx: modesetting fixes and a old buffer eviction fix
- udl: framebuffer destruction fix
- sun4i: disable on R40 fix until next kernel
- pl111: NULL termination on table fix"
* tag 'drm-fixes-2018-09-21' of git://anongit.freedesktop.org/drm/drm: (21 commits)
drm/amdkfd: Fix ATS capablity was not reported correctly on some APUs
drm/amdkfd: Change the control stack MTYPE from UC to NC on GFX9
drm/amdgpu: Fix SDMA HQD destroy error on gfx_v7
drm/vmwgfx: Fix buffer object eviction
drm/vmwgfx: Don't impose STDU limits on framebuffer size
drm/vmwgfx: limit mode size for all display unit to texture_max
drm/vmwgfx: limit screen size to stdu_max during check_modeset
drm/vmwgfx: don't check for old_crtc_state enable status
drm/amdgpu: add new polaris pci id
drm: sun4i: drop second PLL from A64 HDMI PHY
drm: fix drm_drv_uses_atomic_modeset on non modesetting drivers.
drm/i915/gvt: clear ggtt entries when destroy vgpu
drm/i915/gvt: request srcu_read_lock before checking if one gfn is valid
drm/i915/gvt: Add GEN9_CLKGATE_DIS_4 to default BXT mmio handler
drm/i915/gvt: Init PHY related registers for BXT
drm/atomic: Use drm_drv_uses_atomic_modeset() for debugfs creation
drm/fb-helper: Remove set but not used variable 'connector_funcs'
drm: udl: Destroy framebuffer only if it was initialized
drm/sun4i: Remove R40 display pipeline compatibles
drm/pl111: Make sure of_device_id tables are NULL terminated
...
Because CRAT_CU_FLAGS_IOMMU_PRESENT was not set in some BIOS crat, we
need to workaround this.
For future compatibility, we also overwrite the bit in capability according
to the value of needs_iommu_device.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CWSR fails on Raven if the control stack is MTYPE_UC, which is used
for regular GART mappings. As a workaround we map it using MTYPE_NC.
The MEC firmware expects the control stack at one page offset from the
start of the MQD so it is part of the MQD allocation on GFXv9. AMDGPU
added a memory allocation flag just for this purpose.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A wrong register bit was examinated for checking SDMA status so it reports
false failures. This typo only appears on gfx_v7. gfx_v8 checks the correct
bit.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
here comes a collection of various fixes, mostly for stable-tree
or regression fixes.
Two relatively high LOCs are about the (rather simple) conversion of
uapi integer types in topology API, and a regression fix about HDMI
hotplug notification on AMD HD-audio. The rest are all small
individual fixes like ASoC Intel Skylake race condition, minor
uninitialized page leak in emu10k1 ioctl, Firewire audio error paths,
and so on.
-----BEGIN PGP SIGNATURE-----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=Qk/8
-----END PGP SIGNATURE-----
Merge tag 'sound-4.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Takashi writes:
"sound fixes for 4.19-rc5
here comes a collection of various fixes, mostly for stable-tree
or regression fixes.
Two relatively high LOCs are about the (rather simple) conversion of
uapi integer types in topology API, and a regression fix about HDMI
hotplug notification on AMD HD-audio. The rest are all small
individual fixes like ASoC Intel Skylake race condition, minor
uninitialized page leak in emu10k1 ioctl, Firewire audio error paths,
and so on."
* tag 'sound-4.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits)
ALSA: fireworks: fix memory leak of response buffer at error path
ALSA: oxfw: fix memory leak of discovered stream formats at error path
ALSA: oxfw: fix memory leak for model-dependent data at error path
ALSA: bebob: fix memory leak for M-Audio FW1814 and ProjectMix I/O at error path
ALSA: hda - Enable runtime PM only for discrete GPU
ALSA: oxfw: fix memory leak of private data
ALSA: firewire-tascam: fix memory leak of private data
ALSA: firewire-digi00x: fix memory leak of private data
sound: don't call skl_init_chip() to reset intel skl soc
sound: enable interrupt after dma buffer initialization
Revert "ASoC: Intel: Skylake: Acquire irq after RIRB allocation"
ALSA: emu10k1: fix possible info leak to userspace on SNDRV_EMU10K1_IOCTL_INFO
ASoC: cs4265: fix MMTLR Data switch control
ASoC: AMD: Ensure reset bit is cleared before configuring
ALSA: fireface: fix memory leak in ff400_switch_fetching_mode()
ALSA: bebob: use address returned by kmalloc() instead of kernel stack for streaming DMA mapping
ASoC: rsnd: don't fallback to PIO mode when -EPROBE_DEFER
ASoC: rsnd: adg: care clock-frequency size
ASoC: uniphier: change status to orphan
ASoC: rsnd: fixup not to call clk_get/set under non-atomic
...
Commit 19be557010 ("drm/ttm: add operation ctx to ttm_bo_validate v2")
introduced a regression where the vmwgfx driver refused to evict a
buffer that was still busy instead of waiting for it to become idle.
Fix this.
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
If framebuffers are larger, we create bounce surfaces that are within
STDU limits.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
For all display units, limit mode size exposed to texture_max_width/
height as this is the maximum framebuffer size that virtual device can
create.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
For STDU individual screen target size is limited by
SVGA_REG_SCREENTARGET_MAX_WIDTH/HEIGHT registers so add that limit
during atomic check_modeset.
An additional limit is placed in the update_layout ioctl to avoid
requesting layouts that current user-space typically can't support.
Also modified the comments to reflect current limitation on topology.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
During atomic check to prepare the new topology no need to check if
old_crtc_state was enabled or not. This will cause atomic_check to fail
because due to connector routing a crtc can be in atomic_state even if
there was no change to enable status.
Detected this issue with igt run.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
one srcu locking fix and one fix for GGTT clear when destroy vGPU."
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbomjjAAoJEPpiX2QO6xPKlaMH/0sp97hPs11qVzYNrKk3Znh8
DJaI9IzRWfmSwLbfnpyywK7VqqErUltRSwUW+R8X2FqLXeG4shni154/jRdIMy1a
zx7Or/8fIyvVbCEJteMvn+Lv+8ucm8tTG3YL9JqQj7blyo3T1JbtA8zsIoVgug3T
pf4niyqcoO1plpZUsrnGKHmdrhUG+oGUkG6AWOBS8NlGgobvFY5nviyfVhdLEyG1
JZRjruFRnVNmyIgyUCHwSN9ILO6DDykMW6xpqv7CIm8eLcImetHQvwfgEsl8mMUq
SCT5EoUEnzSJrlRHkzoso4X7slM35wJ/JNnCN3NsmznWSs3FoIuFt3R3qsD8GlE=
=XeR4
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-fixes-2018-09-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Only fixes coming from gvt containing "Two more BXT fixes from Colin,
one srcu locking fix and one fix for GGTT clear when destroy vGPU."
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180919151915.GA6309@intel.com
- Fix crash in vgem in drm_drv_uses_atomic_modeset.
- Allow atomic drivers that don't set DRIVER_ATOMIC to create debugfs entries.
- Fix compiler warning for unused connector_funcs.
- Fix null pointer deref on UDL unplug.
- Disable DRM support for sun4i's R40 for now.
(Not all patches went in for v4.19, so it has to wait a cycle.)
- NULL-terminate the of_device_id table in pl111.
- Make sure vc4 NV12 planar format works when displaying an unscaled fb.
-----BEGIN PGP SIGNATURE-----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=bZgz
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2018-09-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v4.19-rc5:
- Fix crash in vgem in drm_drv_uses_atomic_modeset.
- Allow atomic drivers that don't set DRIVER_ATOMIC to create debugfs entries.
- Fix compiler warning for unused connector_funcs.
- Fix null pointer deref on UDL unplug.
- Disable DRM support for sun4i's R40 for now.
(Not all patches went in for v4.19, so it has to wait a cycle.)
- NULL-terminate the of_device_id table in pl111.
- Make sure vc4 NV12 planar format works when displaying an unscaled fb.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/dda393bb-f13f-8d36-711b-cacfc578e5a3@linux.intel.com
The A64 HDMI PHY seems to be not able to use the second video PLL as
clock parent in experiments.
Drop the support for the second PLL from A64 HDMI PHY driver.
Fixes: b46e2c9f5f ("drm/sun4i: Add support for A64 HDMI PHY")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180916043409.62374-2-icenowy@aosc.io
When one vgpu is destroyed, its ggtt entries are not cleared.
This patch clears ggtt entries to avoid information leak.
v2: add 'Fixes' tag (Zhenyu)
Fixes: 2707e44466 ("drm/i915/gvt: vGPU graphics memory virtualization")
Signed-off-by: Zhipeng Gong <zhipeng.gong@intel.com>
Reviewed-by: Hang Yuan <hang.yuan@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Host prints lots of untracked MMIO at 0x4653c when creating linux guest.
"gvt: vgpu 2: untracked MMIO 0004653c len 4"
GEN9_CLKGATE_DIS_4 (0x4653c) is accessed by i915 for gmbus clockgating.
However vgpu doesn't support any clockgating powergating operations
on related mmio access trap so need add it to default handler.
GEN9_CLKGATE_DIS_4 is accessed in bxt_gmbus_clock_gating() which only
applies to GEN9_LP so doens't show the warning on other platforms.
The solution is to add it to default handler init_bxt_mmio_info().
Reviewed-by: He, Min <min.he@intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Recent patch fixed the call trace
"ERROR Port B enabled but PHY powered down? (PHY_CTL 00000000)".
but introduced another similar call trace shown as:
"ERROR Port C enabled but PHY powered down? (PHY_CTL 00000200)".
The call trace will appear when host and guest enabled different ports,
i.e. host using PORT C or neither PORT is enabled, while guest is always
using PORT B as simulated by gvt. The issue is actually covered previously
before the commit and reverals now when the commit do the right thing.
On BXT, some PHY registers are initialized by vbios, before i915 loaded.
Later i915 will re-program some, or skip some based on the implementation.
The initialized mmio for guest i915 is done by gvt, based on the snapshot
taken from host. If host and guest have different PORT enabled, some
DPIO PHY mmios that gvt initialized for guest i915 will not match the
simualted monitor for guest, which leads to guest i915 print the calltrace
when it's trying to enable PHY and PORT.
The solution is to init these DPIO PHY registers to default value, then
guest i915 will program them to reasonable value based on the default
powerwell table and enabled PORT. Together with the old patch, all similar
call trace in guest kernel on BXT can be resolved.
v2: Move PHY register init to intel_vgpu_reset_mmio (Min)
v3: Do not delete empty line in issue fix patch. (zhenyu)
Fixes: c8ab5ac30c ("drm/i915/gvt: Make correct handling to vreg
BXT_PHY_CTL_FAMILY")
Reviewed-by: He, Min <min.he@intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
As pointed out by Daniel Vetter, we should be usinng
drm_drv_uses_atomic_modeset() for determining whether or not we want to
make the debugfs nodes for atomic instead of checking DRIVER_ATOMIC, as
the former isn't an accurate representation of whether or not the driver
is actually using atomic modesetting internally (even though it might
not be exposing atomic capabilities).
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180917173733.21293-1-lyude@redhat.com
The etnaviv device is a virtual device backing the DRM device, which may
drive multiple hardware GPU core devices. As most of the dma-mapping handling
is done through the virtual device, we need to make sure that a proper DMA
setup is in place. The easiest way to get a reasonable configuration is
to let the virtual device share the DMA configuration with one of the GPU
devices, so call of_dma_configure() with the right parameters manually.
This assumes that all etnaviv driven GPU devices in the system share the
same DMA configuration. If we ever encounter a SoC where the GPUs are on
busses with different offsets or behind different IOMMUs that will require
much deeper changes to the driver, as we would need to implement etnaviv
specific versions of most of the DRM helper functions.
For now we should be fine with this solution.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Guido Günther <agx@sigxcpu.org>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
a IPS timeout error suppression on Broadwell and GVT bucked with
"Most critical one is to fix KVM's mm reference when we access guest memory,
issue was raised by Linus [1], and another one with virtual opregion fix."
[1] - https://lists.freedesktop.org/archives/intel-gvt-dev/2018-August/004130.html
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbmEJvAAoJEPpiX2QO6xPKNNMIAItkqjJpqsGZq0Ii1/ph3D9U
gX3Jj4H7ZoAoE/c+wx2nNADjmn8RhV7PnKrGFuXmLkRJaNJllXA8U7h7YfWqRBT9
jQ0RIuFdbfiRrwHmqtEZ2q3XP4HCWbdSIigimO/Lk/A2l+sCY8oA+9bGB7IRxeRV
e162GARNsxN0a8D+5i+KR0mrTezSoKOvYFtUFp76UKUDAKrK85XNQsn1TR8ZMXGC
fIi03y6ZM66I+bzIsq15HEj/jrRcaXm7xjd94/HetqeVJaEOEs2ztfaex+v3yDnC
meWZKWCJ5x9noqHTO3XdHJGlKnfFQxopZsINNiqpqwOKpH7oaHWyAnnUrafJfhA=
=/IQQ
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-fixes-2018-09-11' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
This contains a regression fix for video playbacks on gen 2 hardware,
a IPS timeout error suppression on Broadwell and GVT bucked with
"Most critical one is to fix KVM's mm reference when we access guest memory,
issue was raised by Linus [1], and another one with virtual opregion fix."
[1] - https://lists.freedesktop.org/archives/intel-gvt-dev/2018-August/004130.html
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180911223229.GA30328@intel.com
The recent change of vga_switcheroo allowed the runtime PM for
HD-audio on AMD GPUs, but this also resulted in a regression. When
the HD-audio controller driver gets runtime-suspended, HD-audio link
is turned off, and the hotplug notification is ignored. This leads to
the inconsistent audio state (the connection isn't notified and ELD is
ignored).
The best fix would be to implement the proper ELD notification via the
audio component, but it's still not ready. As a quick workaround,
this patch adds the check of runtime_idle and allows the runtime
suspend only when the vga_switcheroo is bound with discrete GPU.
That is, a system with a single GPU and APU would be again without
runtime PM to keep the HD-audio link for the hotplug notification and
ELD read out.
Also, the codec->auto_runtime_pm flag is set only for the discrete GPU
at the time GPU gets bound via vga_switcheroo (i.e. only dGPU is
forcibly runtime-PM enabled), so that APU can still get the ELD
notification.
For identifying which GPU is bound, a new vga_switcheroo client
callback, gpu_bound, is implemented. The vga_switcheroo simply calls
this when GPU is bound, and tells whether it's dGPU or APU.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200945
Fixes: 07f4f97d7b ("vga_switcheroo: Use device link for HDA controller")
Reported-by: Jian-Hong Pan <jian-hong@endlessm.com>
Tested-by: Jian-Hong Pan <jian-hong@endlessm.com>
Acked-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Messed up when sending pull request and sent an outdated version of
previous patch, this fixes it up to remove warnings.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/drm_fb_helper.c: In function 'drm_pick_crtcs':
drivers/gpu/drm/drm_fb_helper.c:2373:43: warning:
variable 'connector_funcs' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1536722130-108819-1-git-send-email-yuehaibing@huawei.com
Slowly leaking memory one page at a time :)
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Given that we are now reasonably confident in our ability to detect and
reserve the stolen memory (physical memory reserved for graphics by the
BIOS) for ourselves on most machines, we can put it to use. In this
case, we need a page to hold the overlay registers.
On an i915g running MythTv, H Buus noticed that
commit 6a2c4232ec
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Nov 4 04:51:40 2014 -0800
drm/i915: Make the physical object coherent with GTT
introduced stuttering into his video playback. After discarding the
likely suspect of it being the physical cursor updates, we were left
with the use of the phys object for the overlay. And lo, if we
completely avoid using the phys object (allocated just once on module
load!) by switching to stolen memory, the stuttering goes away.
For lack of a better explanation, claim victory and kill two birds with
one stone.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107600
Fixes: 6a2c4232ec ("drm/i915: Make the physical object coherent with GTT")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180906190144.1272-1-chris@chris-wilson.co.uk
(cherry picked from commit c8124d3992)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
since we use PSP to program IH regs now
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix SDMA hang in prt mode, clear XNACK_WATERMARK in reg SDMA0_UTCL1_WATERMK to avoid the issue
Affected ASICs: VEGA10 VEGA12 RV1 RV2
v2: add reg clear for SDMA1
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Tested-by: Yukun Li <yukun1.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoid unlocking a lock we never locked.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes a NULL pointer dereference that can happen if the UDL
driver is unloaded before the framebuffer is initialized. This can
happen e.g. if the USB device is unplugged right after it was plugged
in.
As explained by Stéphane Marchesin:
It happens when fbdev is disabled (which is the case for Chrome OS).
Even though intialization of the fbdev part is optional (it's done in
udlfb_create which is the callback for fb_probe()), the teardown isn't
optional (udl_driver_unload -> udl_fbdev_cleanup ->
udl_fbdev_destroy).
Note that udl_fbdev_cleanup *tries* to be conditional (you can see it
does if (!udl->fbdev)) but that doesn't work, because udl->fbdev is
always set during udl_fbdev_init.
Cc: stable@vger.kernel.org
Suggested-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Emil Lundmark <lndmrk@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180528142711.142466-1-lndmrk@chromium.org
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Two patches from the R40 display pipeline support series weren't applied
with the rest of the series. When they did get applied, the -rc6
deadline for drm-misc-next had past, so they didn't get into 4.19-rc1
with the rest of the series. However, the two patches are crucial in
the parsing of the R40's display pipeline graph in the device tree.
Without them, the driver crashes because it can't follow the odd graph
structure.
This patch removes the R40 compatibles from the sun4i-drm driver,
effectively disabling DRM support for the R40 for one release cycle.
This will prevent the driver from crashing upon probing.
The compatibles should be reinstated for the next release.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180827083950.602-1-wens@csie.org
Signed-off-by: Sean Paul <seanpaul@chromium.org>
When there's no scaling requested ->is_unity should be true no matter
the format.
Also, when no scaling is requested and we have a multi-planar YUV
format, we should leave ->y_scaling[0] to VC4_SCALING_NONE and only
set ->x_scaling[0] to VC4_SCALING_PPF.
Doing this fixes an hardly visible artifact (seen when using modetest
and a rather big overlay plane in YUV420).
Fixes: fc04023faf ("drm/vc4: Add support for YUV planes.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180725122907.13702-1-boris.brezillon@bootlin.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Dave Airlie