This is the capacity in percentage, relative to design capacity.
Specifically, it is present in Apple Magic Mouse 2.
In contrast, usage 00850064 is also the capacity in percentage, but is
relative to full capacity. It is not mapped here because I don't have
such device.
Signed-off-by: John Chen <johnchen902@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Plantronics Blackwire 3220 Series (047f:c056) sends HID reports twice
for each volume key press. This patch adds a quirk to hid-plantronics
for this product ID, which will ignore the second volume key press if
it happens within 5 ms from the last one that was handled.
The patch was tested on the mentioned model only, it shouldn't affect
other models, however, this quirk might be needed for them too.
Auto-repeat (when a key is held pressed) is not affected, because the
rate is about 3 times per second, which is far less frequent than once
in 5 ms.
Fixes: 81bb773fae ("HID: plantronics: Update to map volume up/down controls")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Correct kernel-doc notation in HID header files (include/linux/hid*.h).
Add notation (comments) where it is missing.
Use the documented "Return:" notation for function return values.
Fix a few typos/spellos.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Currently the maximum HID report size which can be buffered by the kernel is
8KB. This is sufficient for the vast majority of HID devices on the market, as
most HID reports are fairly small.
However, some unusual devices such as the Elgate Stream Deck exist which use a
report size slightly over 8KB for the image data that is sent to the device.
Reports these large cannot be buffered by the regular HID subsystem currently,
thus the only way to use such device is to bypass the HID subsystem entirely.
This increases the maximum HID report size to 16KB, which should cover all
sanely designed HID devices.
Signed-off-by: Dean Camera <dean@fourwalledcubicle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There are styluses that only report their battery status when they are
touching the touchscreen; additionally we currently suppress battery
reports if capacity has not changed. To help userspace recognize how long
ago the device reported battery status, let's send the change event through
if either capacity has changed, or at least 30 seconds have passed since
last report we've let through.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add vivaldi HID driver. This driver allows us to read and report the top
row layout of keyboards which provide a vendor-defined (Google) HID
usage.
Signed-off-by: Sean O'Brien <seobrien@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When calling into hid_map_usage(), the passed event code is
blindly stored as is, even if it doesn't fit in the associated bitmap.
This event code can come from a variety of sources, including devices
masquerading as input devices, only a bit more "programmable".
Instead of taking the event code at face value, check that it actually
fits the corresponding bitmap, and if it doesn't:
- spit out a warning so that we know which device is acting up
- NULLify the bitmap pointer so that we catch unexpected uses
Code paths that can make use of untrusted inputs can now check
that the mapping was indeed correct and bail out if not.
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
We have a HID touch device that reports its opens and shorts test
results in HID buffers of size 8184 bytes. The maximum size of the HID
buffer is currently set to 4096 bytes, causing probe of this device to
fail. With this patch we increase the maximum size of the HID buffer to
8192 bytes, making device probe and acquisition of said buffers succeed.
Signed-off-by: Johan Korsnes <jkorsnes@cisco.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Armando Visconti <armando.visconti@st.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
hid_warn_once() is needed. Add the others as part of the block.
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reformat hid_printk macros to use standard __VA_ARGS__ syntax.
Per Joe Perches hid_printk(), hid_emerg(), hid_crit(), and hid_alert() are
unlikely ever to be used. Remove them.
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1334 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some old mice have a tendency to not accept the high resolution multiplier.
They reply with a -EPIPE which was previously ignored.
Force the call to resolution multiplier to be synchronous and actually
check for the answer. If this fails, consider the mouse like a normal one.
Fixes: 2dc702c991 ("HID: input: use the Resolution Multiplier for
high-resolution scrolling")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1700071
Reported-and-tested-by: James Feeney <james@nurealm.net>
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Most Logitech wireless keyboard and mice using the 27 MHz are hidpp10
devices, add support to logitech-dj for their receivers.
Doing so leads to 2 improvements:
1) All these devices share the same USB product-id for their receiver,
making it impossible to properly map some special keys / buttons
which differ from device to device. Adding support to logitech-dj to
see these as hidpp10 devices allows us to get the actual device-id
from the keyboard / mouse.
2) It enables battery-monitoring of these devices
This patch uses a new HID group for 27Mhz devices, since the logitech-hidpp
code needs to be able to differentiate them from other devices instantiated
by the logitech-dj code.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
As seen on some USB wireless keyboards manufactured by Primax, the HID
parser was using some assumptions that are not always true. In this case
it's s the fact that, inside the scope of a main item, an Usage Page
will always precede an Usage.
The spec is not pretty clear as 6.2.2.7 states "Any usage that follows
is interpreted as a Usage ID and concatenated with the Usage Page".
While 6.2.2.8 states "When the parser encounters a main item it
concatenates the last declared Usage Page with a Usage to form a
complete usage value." Being somewhat contradictory it was decided to
match Window's implementation, which follows 6.2.2.8.
In summary, the patch moves the Usage Page concatenation from the local
item parsing function to the main item parsing function.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Terry Junge <terry.junge@poly.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Manually tracking an active collection to set collection parents is not
necessary, we just have to look one step back into the collection stack
to find the correct parent.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Previously, the pointer to the parent collection was stored. If a device
exceeds 16 collections (HID_DEFAULT_NUM_COLLECTIONS), the array to store
the collections is reallocated, the pointer to the parent collection becomes
invalid.
Replace the pointers with an index-based lookup into the collections array.
Fixes: c53431eb69 ("HID: core: store the collections as a basic tree")
Reported-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Kyle Pelton <kyle.d.pelton@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Windows uses a magic number of 120 for a wheel click. High-resolution
scroll wheels are supposed to use a fraction of 120 to signal smaller
scroll steps. This is implemented by the Resolution Multiplier in the
device itself.
If the multiplier is present in the report descriptor, set it to the
logical max and then use the resolution multiplier to calculate the
high-resolution events. This is the recommendation by Microsoft, see
http://msdn.microsoft.com/en-us/windows/hardware/gg487477.aspx
Note that all mice encountered so far have a logical min/max of 0/1, so
it's a binary "yes or no" to high-res scrolling anyway.
To make userspace simpler, always enable the REL_WHEEL_HI_RES bit. Where
the device doesn't support high-resolution scrolling, the value for the
high-res data will simply be a multiple of 120 every time. For userspace,
if REL_WHEEL_HI_RES is available that is the one to be used.
Potential side-effect: a device with a Resolution Multiplier applying to
other Input items will have those items set to the logical max as well.
This cannot easily be worked around but it is doubtful such devices exist.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Verified-by: Harry Cutts <hcutts@chromium.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The Resolution Multiplier is a feature report that modifies the value of
Usages within the same Logical Collection. If the multiplier is set to
anything but 1, the hardware reports (value * multiplier) for the same amount
of physical movement, i.e. the value we receive in the kernel is
pre-multiplied.
The hardware may either send a single (value * multiplier), or by sending
multiplier as many reports with the same value, or a combination of these two
options. For example, when the Microsoft Sculpt Ergonomic mouse Resolution
Multiplier is set to 12, the Wheel sends out 12 for every detent but AC Pan
sends out a value of 3 at 4 times the frequency.
The effective multiplier is based on the physical min/max of the multiplier
field, a logical min/max of [0,1] with a physical min/max of [1,8] means the
multiplier is either 1 or 8.
The Resolution Multiplier was introduced for high-resolution scrolling in
Windows Vista and is commonly used on Microsoft mice.
The recommendation for the Resolution Multiplier is to default to 1 for
backwards compatibility. This patch adds an arbitrary upper limit at 255. The
only known use case for the Resolution Multiplier is for scroll wheels where the
multiplier has to be a fraction of 120 to work with Windows.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Verified-by: Harry Cutts <hcutts@chromium.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
For each collection parsed, store a pointer to the parent collection
(if any). This makes it a lot easier to look up which collection(s)
any given item is part of
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Verified-by: Harry Cutts <hcutts@chromium.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The ASUS laptops start to support the airplane mode radio management
to replace the original mechanism of airplane mode toggle hotkey.
On the ASUS P5440FF, it presents as a HID device connecting via
I2C, named i2c-AMPD0001. When pressing it, the Embedded Controller
send hid report via I2C and switch the airplane mode indicator LED
based on the status.
However, it's not working because it fails to be identified as a
hidinput device. It fails in hidinput_connect() due to the macro
IS_INPUT_APPLICATION doesn't have HID_GD_WIRELESS_RADIO_CTLS as
a legit application code.
It's easy to add the HID I2C vendor and product id to the quirk
list and apply HID_QUIRK_HIDINPUT_FORCE to make it work. But it
makes more sense to support it as a generic input application.
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Add missing definition for HID_DG_WHITEBOARD then replace the hid
usage hex with macros for better readibility.
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
This reverts commit 1ff2e1a44e.
It turns out the current API is not that compatible with
some Microsoft mice, so better start again from scratch.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Harry Cutts <hcutts@chromium.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
The documentation for the .raw_event() callback says that if the
driver return 1, there will be no further processing of the event,
but this is not true, the actual code in hid-core.c looks like this:
if (hdrv && hdrv->raw_event && hid_match_report(hid, report)) {
ret = hdrv->raw_event(hid, report, data, size);
if (ret < 0)
goto unlock;
}
ret = hid_report_raw_event(hid, type, data, size, interrupt);
The only return value that has any effect on the processing is
a negative error.
Correct this as it seems to confuse people: I found bogus code in
the Razer out-of-tree driver attempting to return 1 here.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
To avoid code duplication, this class counts high-resolution scroll
movements and emits the legacy low-resolution events when appropriate.
Drivers should be able to create one instance for each scroll wheel that
they need to handle.
Signed-off-by: Harry Cutts <hcutts@chromium.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The function compare_device_paths from wacom_sys.c is generic
and useful for other drivers. Move the function to hid-core and
rename it as hid_compare_device_paths.
Signed-off-by: Daniel M. Lambea <dmlambea@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Looks like 4 was sufficient until now. However, the Surface Dial needs
a stack of 5 and simply fails at probing.
Dynamically add HID_COLLECTION_STACK_SIZE to the size of the stack if
we hit the upper bound.
Checkpatch complains about bare unsigned, so converting those to
'unsigned int' in struct hid_parser
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Dell Canvas 27 has a tool that can be put on the surface and acts
as a dial. The firmware processes the detection of the tool and forward
regular HID reports with X, Y, Azimuth, rotation, width/height.
The firmware also exports Contact ID, Countact Count which may hint that
several totems can be used at the same time (the FW only supports one).
We can tell that MT_TOOL_DIAL will be reported by setting the min/max
of ABS_MT_TOOL_TYPE to MT_TOOL_DIAL.
This tool is aimed at being used by the system and not the applications,
so the user space processing should not go through the regular touch
inputs.
We set INPUT_PROP_DIRECT which applies ID_INPUT_TOUCHSCREEN to this new
type of devices, but we will counter this for the time being with the
special udev hwdb entry mentioned above.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1511846
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Detected on the Dell XPS 9365.
The laptop has 2 devices that benefit from the hid-generic auto-unbinding.
When those 2 devices are presented to the userspace, udev loads both wacom and
hid-multitouch. When this happens, the code in __hid_bus_reprobe_drivers() is
called concurrently and the second device gets reprobed twice.
An other bug in the power_supply subsystem prevent to remove the wacom driver
if it just finished its initialization, which basically kills the wacom node.
[jkosina@suse.cz: reformat changelog a bit]
Fixes c17a7476e4 ("HID: core: rewrite the hid-generic automatic unbind")
Cc: stable@vger.kernel.org # v4.17
Tested-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
- improvement of duplicate usage handling in hid-input from Benjamin Tissoires
- Win 8.1 precisioun touchpad spec implementation from Benjamin Tissoires
There are two ways to connect the Steam Controller: directly to the USB
or with the USB wireless adapter. Both methods are similar, but the
wireless adapter can connect up to 4 devices at the same time.
The wired device will appear as 3 interfaces: a virtual mouse, a virtual
keyboard and a custom HID device.
The wireless device will appear as 5 interfaces: a virtual keyboard and
4 custom HID devices, that will remain silent until a device is actually
connected.
The custom HID device has a report descriptor with all vendor specific
usages, so the hid-generic is not very useful. In a PC/SteamBox Valve
Steam Client provices a software translation by using hidraw and a
creates a uinput virtual gamepad and XTest keyboard/mouse.
This driver intercepts the hidraw usage, so it can get out of the way
when the Steam Client is in use.
Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Given that we create one input node per application, we should name
the input node accordingly to not lose userspace.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It is not a good idea to try to fit all types of applications in the
same input report. There are a lot of devices that are needing
the quirk HID_MULTI_INPUT but this quirk doesn't match the actual HID
description as it is based on the report ID.
Given that most devices with MULTI_INPUT I can think of split nicely
the devices inputs into application, it is a good thing to split the
devices by default based on this assumption.
Also make hid-multitouch following this rule, to not have to deal
with too many input created.
While we are at it, fix some checkpatch complaints about converting
'unsigned' to 'unsigned int'.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We were only storing the report in case of QUIRK_MULTI_INPUT.
It is interesting for the upcoming HID_QUIRK_INPUT_PER_APP to also
store the full list of reports that are attached to it.
We need the full list because a device (Advanced Silicon has some)
might want to use a different report ID for the Input reports and
the Output reports. Storing the full list allows the drivers to
have all the data.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This is something that bothered us from a long time. When hid-input
doesn't know how to map a usage, it uses *_MISC. But there is something
else which increments the usage if the evdev code is already used.
This leads to few issues:
- some devices may have their ABS_X mapped to ABS_Y if they export a bad
set of usages (see the DragonRise joysticks IIRC -> fixed in a specific
HID driver)
- *_MISC + N might (will) conflict with other defined axes (my Logitech
H800 exports some multitouch axes because of that)
- this prevents to freely add some new evdev usages, because "hey, my
headset will now report ABS_COFFEE, and it's not coffee capable".
So let's try to kill this nonsense, and hope we won't break too many
devices.
I my headset case, the ABS_MISC axes are created because of some
proprietary usages, so we might not break that many devices.
For backward compatibility, a quirk HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE
is created and can be applied to any device that needs this behavior.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The commit 581c448476 ("HID: input: map digitizer battery usage")
assumed that devices having input (qas opposed to feature) report for
battery strength would report the data on their own, without the need to
be polled by the kernel; unfortunately it is not so. Many wireless mice
do not send unsolicited reports with battery strength data and have to
be polled explicitly. As a complication, stylus devices on digitizers
are not normally connected to the base and thus can not be polled - the
base can only determine battery strength in the stylus when it is in
proximity.
To solve this issue, we add a special flag that tells the kernel
to avoid polling the device (and expect unsolicited reports) and set it
when report field with physical usage of digitizer stylus (HID_DG_STYLUS).
Unless this flag is set, and we have not seen the unsolicited reports,
the kernel will attempt to poll the device when userspace attempts to
read "capacity" and "state" attributes of power_supply object
corresponding to the devices battery.
Fixes: 581c448476 ("HID: input: map digitizer battery usage")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=198095
Cc: stable@vger.kernel.org
Reported-and-tested-by: Martin van Es <martin@mrvanes.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There is no real point of registering an empty input node.
This should be default, but given some drivers need the blank input
node to set it up during input_configured, we need to postpone
the check for hidinput_has_been_populated().
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This can lead to some hairy situation with the developer losing
a day or two realizing that 4 should be after 2, not 3.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
--
include/linux/hid.h | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We actually can have the unbind/rebind logic in hid-core.c, leaving
only the match function in hid-generic.
This makes hid-generic simpler and the whole logic simpler too.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When size is negative, calling memset will make segment fault.
Declare the size as type u32 to keep memset safe.
size in struct hid_report is unsigned, fix return type of
hid_report_len to u32.
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The current hid-multitouch driver only allow the report of two
orientations, vertical and horizontal. We use the Azimuth orientation
usage 0x3F under the Digitizer usage page to report orientation if the
device supports it.
Changelog:
v1 -> v2:
- Fix commit message.
- Remove resolution reporting for ABS_MT_ORIENTATION.
v2 -> v3:
- Fix commit message.
v3 -> v4:
- Fix ABS_MT_ORIENTATION ABS param range.
- Don't set ABS_MT_ORIENTATION in ABS_DG_HEIGHT when it is already
set by ABS_DG_AZIMUTH.
v4 -> v5:
- Improve multi-touch-protocol.rst documentation.
Signed-off-by: Wei-Ning Huang <wnhuang@chromium.org>
Signed-off-by: Wei-Ning Huang <wnhuang@google.com>
Reviewed-by: Dmitry Torokhov <dtor@chromium.org>
Reviewed-by: Henrik Rydberg <rydberg@bitmath.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jiri Kosina