The patch contains several styling fixes:
- Make names of hotplug devices shorter;
- Change register offset assignment to defines;
- Add defines for the all event masks;
- Use PLATFORM_DEVID_NONE instead of -1;
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
HP ZBook 17 laptop needs a non-standard mapping (xy_swap_yz_inverted).
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The accelerometer event relies on the ACERWMID_EVENT_GUID notify.
So, this patch changes the codes to setup accelerometer input device
when detected ACERWMID_EVENT_GUID. It avoids that the accel input
device created on every Acer machines.
In addition, patch adds a clearly parsing logic of accelerometer hid
to acer_wmi_get_handle_cb callback function. It is positive matching
the "SENR" name with "BST0001" device to avoid non-supported hardware.
Reported-by: Bjørn Mork <bjorn@mork.no>
Cc: Darren Hart <dvhart@infradead.org>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
[andy: slightly massage commit message]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The "radio components indicator" LED present in Lifebook E734/E744/E754
should be lit when any radio transmitter is enabled, so set its default
trigger to rfkill-any.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The BayTrail and CherryTrail platforms provide platform clocks
through their Power Management Controller (PMC).
The SoC supports up to 6 clocks (PMC_PLT_CLK[0..5]) with a
frequency of either 19.2 MHz (PLL) or 25 MHz (XTAL) for BayTrail
and a frequency of 19.2 MHz (XTAL) for CherryTrail. These clocks
are available for general system use, where appropriate. For example,
the usage for platform clocks suggested in the datasheet is the
following:
PLT_CLK[0..2] - Camera
PLT_CLK[3] - Audio Codec
PLT_CLK[4] -
PLT_CLK[5] - COMMs
Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The pmc_atom driver does not contain any architecture specific
code. It only enables the SoC Power Management Controller driver
for BayTrail and CherryTrail platforms.
Move the pmc_atom driver from arch/x86/platform/atom to
drivers/platform/x86. Also clean-up and reorder include files by
alphabetical order in pmc_atom.h
Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
On Ideapad laptops, ACPI event 1 is currently not handled. Many models
log "ideapad_laptop: Unknown event: 1" every 20 seconds or so while
running on battery power. Some convertible laptops receive this event
when switching in and out of tablet mode.
This adds and additional case for event 1 in ideapad_acpi_notify to call
ideapad_input_report(priv, vpc_bit), so that the event is reported to
userspace and we avoid unnecessary logging.
Fixes bug #107481 (https://bugzilla.kernel.org/show_bug.cgi?id=107481)
Fixes bug #65751 (https://bugzilla.kernel.org/show_bug.cgi?id=65751)
Signed-off-by: Zach Ploskey <zach@ploskey.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The commit 1c6c69525b ("genirq: Reject bogus threaded irq requests")
starts refusing misconfigured interrupt handlers. This makes
intel_mid_powerbtn not working anymore.
Add a mandatory flag to a threaded IRQ request in the driver.
Fixes: 1c6c69525b ("genirq: Reject bogus threaded irq requests")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The patch 3dda3b3798f9: "platform/x86: Add custom surface3 platform
device for controlling LID" from Nov 25, 2016, leads to the following
static checker warning:
drivers/platform/x86/surface3-wmi.c:168 s3_wmi_check_platform_device()
error: uninitialized symbol 'ts_adev'.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The newly added driver guards its "resume" callback with an
warning in some configurations:
drivers/platform/x86/surface3-wmi.c:248:12: error: 's3_wmi_resume' defined but not used [-Werror=unused-function]
Using a __maybe_unused annotation without an #ifdef avoids the mistake more
reliably.
Fixes: 3dda3b3798 ("platform/x86: Add custom surface3 platform device for controlling LID")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
There is an off-by-one error so we don't unregister priv->pdev_mux[0].
Also it's slightly simpler as a while loop instead of a for loop.
Fixes: 58cbbee239 ("x86/platform/mellanox: Introduce support for Mellanox systems platform")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
All LED-setting functions in fujitsu-laptop are currently assigned to
the brightness_set callback, which is incorrect because they can sleep
(due to their use of call_fext_func(), which in turn issues ACPI calls)
and the documentation (in include/linux/leds.h) clearly states they must
not. Assign them to brightness_set_blocking instead and change them to
match the expected function prototype.
This change makes it possible to use Fujitsu-specific LEDs with "heavy"
triggers, like disk-activity or phy0rx.
Fixes: 3a40708609 ("fujitsu-laptop: Add BL power, LED control and radio state information")
Fixes: 4f62568c1f ("fujitsu-laptop: Support radio LED")
Fixes: d6b88f64b0 ("fujitsu-laptop: Add support for eco LED")
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fix build errors when I2C=m and SURFACE_3_BUTTON=y.
The driver uses i2c interfaces so it should depend on I2C.
drivers/built-in.o: In function `surface3_driver_init':
surface3_button.c:(.init.text+0x75cb0): undefined reference to `i2c_register_driver'
drivers/built-in.o: In function `surface3_driver_exit':
surface3_button.c:(.exit.text+0x31a8): undefined reference to `i2c_del_driver'
Fixes: 1a64b719d3 (platform/x86: Introduce button support for the Surface 3)
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Cc: platform-driver-x86@vger.kernel.org
Cc: Darren Hart <dvhart@infradead.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
ktime_set(S,N) was required for the timespec storage type and is still
useful for situations where a Seconds and Nanoseconds part of a time value
needs to be converted. For anything where the Seconds argument is 0, this
is pointless and can be replaced with a simple assignment.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move and add registration for the mlx-platform driver. Introduce button and lid
drivers for the surface3 (different from the surface3-pro). Add BXT PMIC TMU
support. Add Y700 to existing ideapad-laptop quirk.
ideapad-laptop:
- Add Y700 15-ACZ to no_hw_rfkill DMI list
surface3_button:
- Introduce button support for the Surface 3
surface3-wmi:
- Add custom surface3 platform device for controlling LID
- Balance locking on error path
mlx-platform:
- Add mlxcpld-hotplug driver registration
- Fix semicolon.cocci warnings
- Move module from arch/x86
platform/x86:
- Add Whiskey Cove PMIC TMU support
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYVxXxAAoJEKbMaAwKp364mDAIAL750zoO/liY1qfFGktkY2zS
xknJqh4UeIVW6iN9hEq7jQD3jkFl7hNuXgFyogLZgJQge8gfufsOD7ljkhp2wVF2
3Ir437f4GdcUeuhO6PwuPZnn++Y6oH2rLZc1d+5anZRikW470tnXitrXs5hsqG57
74KiSFa+v+Uj1kqU4Gjt0QDSfmQc185Wn5xieHPpZrcjDaut+N4t06+MDMcH7fjk
6nJ+tvo/dreZojA+AklljaNB2BioIGbEOGamnxOJ9Rjs0jV2d0A1c/6XBHDe+Xtu
SkWqvjdrLOSxAjErBpB97VYnYihjCDXfl+DIABOdumGO6hJz01DvbZ+VVLwGM0E=
=YH31
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.10-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull more x86 platform driver updates from Darren Hart:
"Move and add registration for the mlx-platform driver. Introduce
button and lid drivers for the surface3 (different from the
surface3-pro). Add BXT PMIC TMU support. Add Y700 to existing
ideapad-laptop quirk.
Summary:
ideapad-laptop:
- Add Y700 15-ACZ to no_hw_rfkill DMI list
surface3_button:
- Introduce button support for the Surface 3
surface3-wmi:
- Add custom surface3 platform device for controlling LID
- Balance locking on error path
mlx-platform:
- Add mlxcpld-hotplug driver registration
- Fix semicolon.cocci warnings
- Move module from arch/x86
platform/x86:
- Add Whiskey Cove PMIC TMU support"
* tag 'platform-drivers-x86-v4.10-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
platform/x86: surface3-wmi: Balance locking on error path
platform/x86: Add Whiskey Cove PMIC TMU support
platform/x86: ideapad-laptop: Add Y700 15-ACZ to no_hw_rfkill DMI list
platform/x86: Introduce button support for the Surface 3
platform/x86: Add custom surface3 platform device for controlling LID
platform/x86: mlx-platform: Add mlxcpld-hotplug driver registration
platform/x86: mlx-platform: Fix semicolon.cocci warnings
platform/x86: mlx-platform: Move module from arch/x86
There is a possibility that lock will be left acquired.
Consolidate error path under out_free_unlock label.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This adds TMU (Time Management Unit) support for Intel BXT platform.
It enables the alarm wake-up functionality in the TMU unit of Whiskey Cove
PMIC.
Signed-off-by: Nilesh Bacchewar <nilesh.bacchewar@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[andy: resolve merge conflict in Kconfig]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Like other Y700 models Lenovo Y700 15-ACZ does not have a physical rfkill switch.
ideapad-laptop wrongly reports all radios as blocked by hardware which causes
wireless network connections to fail.
Add this model without an rfkill switch to the no_hw_rfkill list.
Signed-off-by: Artiom Vaskov <velemas@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The Surface 3 is not following the ACPI spec for PNP0C40, but nearly.
The device is connected to a I2C device that might have some magic
but we don't know about.
Just create the device after the enumeration and use the declared GPIOs
to provide button support.
This driver is just an adaptation of drivers/input/misc/soc_button_array.c
The Surface Pro 3 is using an ACPI driver and matches against the bid
of the device ("VGBI"). To prevent this incompatible driver to be used
on the Surface Pro, we add a match on the Surface 3 bid "TEV2".
link: https://bugzilla.kernel.org/show_bug.cgi?id=102761
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The LID state provided by ACPI on the Surface 3 is not accurate.
The ACPI node doesn't get notified on LID open, which means the
LID input switch stays close most of the time.
Fortunatelly, there is a WMI method which directly queries the
GPIO underneath the LID state, so it's far more reliable than ACPI.
To get the notifications that the LID was opened/closed, we can
rely on the ACPI notification of the touchscreen: the DSDT shows
that the touchscreen will get notified on close/open as it also
controls its _STA method.
Note that we need to set the tag "power-switch" to the LID
input node through a udev rule for logind to accept it:
SUBSYSTEM=="input", KERNEL=="event*", KERNELS=="surface3-wmi", \
TAG+="power-switch"
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add calls for mlxcpld-hotplug platform driver registration/unregistration
and add platform hotplug data configurations. This driver, when registered
within system will handle system hot-plug events for the power suppliers,
power cables and fans (insertion and removing). These events are
controlled through CPLD Lattice device.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Since mlx-platform is not an architectural driver, it is moved out
of arch/x86/platform to drivers/platform/x86.
Relevant Makefile and Kconfig are updated.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Introduce one new driver for Mellanox platforms. Add support for various new
models to existing drivers via quirks, hotkeys, etc. Significant updates to
intel_pmc_core in support of Kabylake and Sunrise Point PCH power management
debug. Some cleanup and refactoring across various drivers.
dell-laptop:
- Use brightness_set_blocking for kbd_led_level_set
thinkpad_acpi:
- Initialize local in_tablet_mode and type
- Fix old style declaration GCC warning
- Adding new hotkey ID for Lenovo thinkpad
- Add support for X1 Yoga (2016) Tablet Mode
- Move tablet detection into separate function
asus-nb-wmi:
- Add X45U quirk
- Make use of dmi->ident
asus-wmi:
- Set specified XUSB2PR value for X550LB
intel_mid_thermal:
- Fix suspend handlers unused warning
intel-vbtn:
- Switch to use devm_input_allocate_device
dell-wmi:
- Add events created by Dell Rugged 2-in-1s
- Adjust wifi catcher to emit KEY_WLAN
intel_pmc_core:
- Add KBL CPUID support
- Add LTR IGNORE debug feature
- Add MPHY PLL clock gating status
- ModPhy core lanes pg status
- Add PCH IP Power Gating Status
- Fix PWRMBASE mask and mmio reg len
acer-wmi:
- Only supports AMW0_GUID1 on acer family
mlx-platform:
- Introduce support for Mellanox hotplug driver
platform/x86:
- Use ACPI_FAILURE at appropriate places
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYUwFxAAoJEKbMaAwKp3645GkH/RjsE8jubyerhlKqgG4UZaRA
2a2NnCOI1fuDqSV0bgIo4rzMHeHHjR8Hosz6HXkb3cC67QNfae3Xasr2+vqzqqKd
hJFUL/y6JmAhLUcPVp49HWOLrYLKM12iLyEidPOor4r/qWrarLtVEyvX5O8VEy01
+cM29+KcZnHjtQQoDaVwWZ1bEbLVNRlSrQ/YZivGBPXJBsvnz1Wq5xPuGHDm660X
rVw8h1GojPwctiNWTpw2VlMUz8Ho0yXMBAPTpEJOzlFR8FTaSD6XQqm/uZ5w8ToJ
Sn12XavaKeQSki7VVTmouL+L4Ams0Ygz8pgDd3ynhN6U/hFfTWbGhdRCILxmSRk=
=iHwp
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.10-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver updates from Darrent Hart:
"Introduce one new driver for Mellanox platforms. Add support for
various new models to existing drivers via quirks, hotkeys, etc.
Significant updates to intel_pmc_core in support of Kabylake and
Sunrise Point PCH power management debug. Some cleanup and refactoring
across various drivers.
Detailed summary:
dell-laptop:
- Use brightness_set_blocking for kbd_led_level_set
thinkpad_acpi:
- Initialize local in_tablet_mode and type
- Fix old style declaration GCC warning
- Adding new hotkey ID for Lenovo thinkpad
- Add support for X1 Yoga (2016) Tablet Mode
- Move tablet detection into separate function
asus-nb-wmi:
- Add X45U quirk
- Make use of dmi->ident
asus-wmi:
- Set specified XUSB2PR value for X550LB
intel_mid_thermal:
- Fix suspend handlers unused warning
intel-vbtn:
- Switch to use devm_input_allocate_device
dell-wmi:
- Add events created by Dell Rugged 2-in-1s
- Adjust wifi catcher to emit KEY_WLAN
intel_pmc_core:
- Add KBL CPUID support
- Add LTR IGNORE debug feature
- Add MPHY PLL clock gating status
- ModPhy core lanes pg status
- Add PCH IP Power Gating Status
- Fix PWRMBASE mask and mmio reg len
acer-wmi:
- Only supports AMW0_GUID1 on acer family
mlx-platform:
- Introduce support for Mellanox hotplug driver
platform/x86:
- Use ACPI_FAILURE at appropriate places"
* tag 'platform-drivers-x86-v4.10-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (22 commits)
platform/x86: thinkpad_acpi: Initialize local in_tablet_mode and type
platform/x86: dell-laptop: Use brightness_set_blocking for kbd_led_level_set
platform/x86: thinkpad_acpi: Fix old style declaration GCC warning
platform/x86: thinkpad_acpi: Adding new hotkey ID for Lenovo thinkpad
platform/x86: thinkpad_acpi: Add support for X1 Yoga (2016) Tablet Mode
platform/x86: thinkpad_acpi: Move tablet detection into separate function
platform/x86: asus-nb-wmi.c: Add X45U quirk
platform/x86: asus-nb-wmi: Make use of dmi->ident
platform/x86: asus-wmi: Set specified XUSB2PR value for X550LB
platform/x86: intel_mid_thermal: Fix suspend handlers unused warning
platform/x86: intel-vbtn: Switch to use devm_input_allocate_device
platform/x86: Use ACPI_FAILURE at appropriate places
platform/x86: dell-wmi: Add events created by Dell Rugged 2-in-1s
platform/x86: dell-wmi: Adjust wifi catcher to emit KEY_WLAN
platform/x86: intel_pmc_core: Add KBL CPUID support
platform/x86: intel_pmc_core: Add LTR IGNORE debug feature
platform/x86: intel_pmc_core: Add MPHY PLL clock gating status
platform/x86: intel_pmc_core: ModPhy core lanes pg status
platform/x86: intel_pmc_core: Add PCH IP Power Gating Status
platform/x86: intel_pmc_core: Fix PWRMBASE mask and mmio reg len
...
linux-next reported in_tablet_mode and type may be used uninitialized
after:
b318002838 ("platform/x86: thinkpad_acpi: Move tablet detection into separate function")
This turns out to be a false positive as the pr_info call cannot be
reached if tp_features.hotkey_tablet (global scope) is 0, and
in_tablet_mode and type are assigned in both places
tp_features.hotkey_tablet is assigned.
Regardless, to make it explicit and avoid further reports, initialize
in_tablet_mode to 0 and type to NULL.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Lyude <lyude@redhat.com>
Here's the big char/misc driver patches for 4.10-rc1. Lots of tiny
changes over lots of "minor" driver subsystems, the largest being some
new FPGA drivers. Other than that, a few other new drivers, but no new
driver subsystems added for this kernel cycle, a nice change.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWFAtwA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykyCgCeJn36u1AsBi7qZ3u/1hwD8k56s2IAnRo6U31r
WW65YcNTK7qYXqNbfgIa
=/t/V
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here's the big char/misc driver patches for 4.10-rc1. Lots of tiny
changes over lots of "minor" driver subsystems, the largest being some
new FPGA drivers. Other than that, a few other new drivers, but no new
driver subsystems added for this kernel cycle, a nice change.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (107 commits)
uio-hv-generic: store physical addresses instead of virtual
Tools: hv: kvp: configurable external scripts path
uio-hv-generic: new userspace i/o driver for VMBus
vmbus: add support for dynamic device id's
hv: change clockevents unbind tactics
hv: acquire vmbus_connection.channel_mutex in vmbus_free_channels()
hyperv: Fix spelling of HV_UNKOWN
mei: bus: enable non-blocking RX
mei: fix the back to back interrupt handling
mei: synchronize irq before initiating a reset.
VME: Remove shutdown entry from vme_driver
auxdisplay: ht16k33: select framebuffer helper modules
MAINTAINERS: add git url for fpga
fpga: Clarify how write_init works streaming modes
fpga zynq: Fix incorrect ISR state on bootup
fpga zynq: Remove priv->dev
fpga zynq: Add missing \n to messages
fpga: Add COMPILE_TEST to all drivers
uio: pruss: add clk_disable()
char/pcmcia: add some error checking in scr24x_read()
...
kbd_led_level_set uses dell_smbios call which blocks, so the kbd_led
classdev should use the brightness_set_blocking callback.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Fix an [-Wold-style-declaration] GCC warning by moving the inline
keyword before the return type.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Recently we met an issue on lots of Lenovo thinkpad laptops (those
laptops are not released to market yet), the issue is that the
thinkpad_acpi.ko can't be automatically loaded as before.
Through debugging, we found the HKEY_HID is LEN0268 instead of
LEN0068 on those machines, and the MHKV is 0x200 instead of
0x100. So adding the new ID into the driver.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
For whatever reason, the X1 Yoga doesn't support the normal method of
querying for tablet mode. Instead of providing the MHKG method under the
hotkey handle, we're instead given the CMMD method under the EC handle.
Values on this handle are either 0x1, laptop mode, or 0x6, tablet mode.
Tested-by: Daniel Martin <consume.noise@gmail.com>
Signed-off-by: Lyude <lyude@redhat.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The hotkey events and ACPI handles used for detecting tablet mode on a
few of the newer thinkpad models (Yoga X1 and the Yoga 260 specifically)
have been changed around, so unfortunately this means we're definitely
going to need to probe for multiple types of tablet mode support. Since
the hotkey_init() is already a lot larger than it should be, let's split
up this detection into its own function to make things a little easier
to read.
As well, since we're going to have multiple types of tablet modes, make
hotkey_tablet into an enum so we can also use it to indicate the type of
tablet mode reporting the machine supports.
Suggested by Daniel Martin <consume.noise@gmail.com>
Signed-off-by: Lyude <lyude@redhat.com>
Cc: Daniel Martin <consume.noise@gmail.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Without this patch, the Asus X45U wireless card can't be turned
on (hard-blocked), but after a suspend/resume it just starts working.
Following this bug report[1], there are other cases like this one, but
this Asus is the only model that I can test.
[1] https://ubuntuforums.org/showthread.php?t=2181558
Cc: stable@vger.kernel.org # 4.4.x-
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Make use of dmi->ident as other drivers do, like fujitsu, intel,
hp and samsung.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fix:
drivers/platform/x86/intel_mid_thermal.c:424:12: warning: ‘mid_thermal_resume’
defined but not used [-Wunused-function]
static int mid_thermal_resume(struct device *dev)
^
drivers/platform/x86/intel_mid_thermal.c:436:12: warning: ‘mid_thermal_suspend’
defined but not used [-Wunused-function]
static int mid_thermal_suspend(struct device *dev)
^
which I see during randbuilds here.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Darren Hart <dvhart@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Use devm_input_allocate_device to simplify the error handling code.
This conversion also makes input_register_device() to be called after
acpi_remove_notify_handler. This avoid a small window that it's possible
to call notify_handler after unregister input device.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Use ACPI_FAILURE() to replace !ACPI_SUCCESS(), this avoid !! operations.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The Dell Rugged 7202 has 3 programmable buttons (labeled P1, P2, P3)
and a detachable keyboard/mouse dock.
Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Wifi catcher is a slider switch, that when slid past the on position
will emit an event that is intended for launching a wifi application
or applet when the machine is turned on.
Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This patch adds Kabylake CPU support for pmc_core driver.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
SPT LTR_IGN register provides a means to make the PMC ignore the LTR values
reported by the individual PCH devices.
echo <IP Offset> > /sys/kernel/debug/pmc_core/ltr_ignore.
When a particular IP Offset bit is set the PMC will ignore the LTR value
reported by the corresponding IP when the PMC performs the latency
coalescing.
IP Offset IP Name
0 SPA
1 SPB
2 SATA
3 GBE
4 XHCI
5 RSVD
6 ME
7 EVA
8 SPC
9 Azalia/ADSP
10 RSVD
11 LPSS
12 SPD
13 SPE
14 Camera
15 ESPI
16 SCC
17 ISH
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
[dvhart: pmc_core_ltr_ignore_write local declaration order cleanup]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
ModPhy Common lanes can provide the clock gating status for the important
system PLLs such as Gen2 USB3PCIE2 PLL, DMIPCIE3 PLL, SATA PLL and MIPI
PLL.
On SPT, in addition to the crystal oscillator clock, the 100Mhz Gen2
USB3PCI2 PLL clock is used as the PLL reference clock and Gen2 PLL idling
is a necessary condition for the platform to go into low power states like
PC10 and S0ix.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The PCH implements a number of High Speed I/O (HSIO) lanes that are split
between PCIe*, USB 3.0, SATA, GbE, USB OTG and SSIC. This patch shows the
current power gating status of the available ModPhy Core lanes. This is
done by sending a message to the PMC (MTPMC) that contains the XRAM
register offset for the MPHY_CORE_STS_0 and MPHY_CORE_STS_1 and then by
reading the response sent by the PMC (MFPMC).
While enabling low power modes we often encounter situations when the
ModPhy lanes are not power gated and it becomes hard to debug which lane is
active and which is not in the absence of an external hardware debugger
(JTAG/ITP). This patch eliminates the dependency on an external hardware
debugger for reading the ModPhy Lanes power gating status.
This patch requires PMC_READ_DISABLE setting to be disabled in the platform
bios.
cat /sys/kernel/debug/pmc_core/mphy_lanes_power_gating_status
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch adds the support for reading the power gating status of various
devices present on Sunrise Point PCH. This is intended to be used for
debugging purpose while tuning the platform for power optimizations and
also to understand which devices (on PCH) are blocking the system to enter
a low power state.
Power Management Controller on Sunrise Point PCH provides access to "PGD
PFET Enable Ack Status Registers (ppfear)". This patch reads and decodes
this register and dumps the output in formatted manner showing various
devices present on the PCH and their "Power Gating" status.
Further documentation can be found in Intel 7th Gen Core family mobile u/y
processor io datasheet volume 2.
Sample output (stripped and not in order):
cat /sys/kernel/debug/pmc_core/pch_ip_power_gating_status
PMC State: Not Power gated
OPI-DMI State: Not Power gated
XHCI State: Power gated
LPSS State: Power gated
CSME_PSF State: Not power gated
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
On Sunrise Point PCH, the Power Management Controller provides 4K bytes of
memory space for various power management and debug registers. This fix is
needed to access power management & debug registers that are mapped at a
higher offset.
Also, this provides a fix for correctly masking the PWRMBASE as the initial
bits (0-11) are reserved.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The AMW0_GUID1 wmi is not only found on Acer family but also other
machines like Lenovo, Fujitsu and Medion. In the past, acer-wmi handled
those non-Acer machines by quirks list.
But actually acer-wmi driver was loaded on any machine that had
AMW0_GUID1. This behavior is strange because those machines should be
supported by appropriate wmi drivers. e.g. fujitsu-laptop,
ideapad-laptop.
This patch adds the logic to check the machine that has AMW0_GUID1
should be in Acer/Packard Bell/Gateway white list. But, it still keeps
the quirk list of those supported non-acer machines for backward
compatibility.
Tested-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Fix a recent regression in the 8250_dw serial driver introduced by
adding a quirk for the APM X-Gene SoC to it which uncovered an issue
related to the handling of built-in device properties in the core
ACPI device enumeration code (Heikki Krogerus).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=XF0E
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix a recent regression in the 8250_dw serial driver introduced by
adding a quirk for the APM X-Gene SoC to it which uncovered an issue
related to the handling of built-in device properties in the core ACPI
device enumeration code (Heikki Krogerus)"
* tag 'acpi-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / platform: Add support for build-in properties
Moving from get_user_pages() to get_user_pages_unlocked() simplifies the code
and takes advantage of VM_FAULT_RETRY functionality when faulting in pages.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have a couple of drivers, acpi_apd.c and acpi_lpss.c,
that need to pass extra build-in properties to the devices
they create. Previously the drivers added those properties
to the struct device which is member of the struct
acpi_device, but that does not work. Those properties need
to be assigned to the struct device of the platform device
instead in order for them to become available to the
drivers.
To fix this, this patch changes acpi_create_platform_device
function to take struct property_entry pointer as parameter.
Fixes: 20a875e2e8 (serial: 8250_dw: Add quirk for APM X-Gene SoC)
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Yazen Ghannam <yazen.ghannam@amd.com>
Tested-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This includes two branch merges for elements that may also go via MFD.
New device support
* cros_ec
- new driver to support these Chrome OS contiguous sensors which are behind
the Chrome OS embedded controller. Requires a few minor MFD and chrome
platform changes. One follow up fix deals with some dependency issues in
Kconfig.
* mpu-3050
- new driver and device tree bindings for this venerable device.
* st_accel
- support for the lng2dm an
Driver features
* ad7192
- Add DVdd regulator handling
* ad9832
- Add DVDD regulator handling
* at91
- Suspend and resume support
* si7020
- Device tree bindings
* ti-am335x
- DMA support - uses dma to accelerate short bursts of read back rather
than full blown DMA buffer support. Greatly improved performance.
Includes an MFD addition to give access to the address needed for DMA.
* tsl2583
- Device tree bindings
Cleanups and minor fixes
* ad7192
- Fix regulator naming to match datasheet
- Handle regulator errors correctly (so as to not break deferred probing)
- Rename reg variable to reflect which regulator it is
* ad5933
- Fix regulator naming to match datasheet
- Handle regulator errors correctly (so as to not break deferred probing)
* ad7746
- Fix a missing return value (fallout from previous patch set)
* ad7780
- Fix regulator naming to match datasheet
- Handle regulator errors correctly (so as to not break deferred probing)
* ad9832
- Fix regulator naming to match datasheet
- Handle regulator errors correctly (so as to not break deferred probing)
- Rename reg regulator to reflect which one it is
* ad9834
- Fix regulator naming to match datasheet
- Handle regulator errors correctly (so as to not break deferred probing)
* hts221
- Remove a duplicated include
* maxim thermocouple
- Handle a wrong storage side in read function. Prevent any problems that
might be introduced by additions to this driver in future.
* tsl2583 - big set from Brian Masney to drive this towards a staging
graduation.
- Convert to iio_chan_spec and read_raw / write_raw (in a couple of steps)
- Improved error handling in various functions
- Drop redundant power_state custom sysfs attribute.
- Use IIO_*_ATTR* macros for remaining attributes.
- Return an error code to userspace on invalid parameters being writen to
sysfs files.
- Add locking to various attribute accesses to remove possible races.
- Add defines for various magic numbers.
- Use smbus_read_byte_data instead of a write_byte followed by read_byte.
- Query only relevant registers in probe.
- Tidy up ordering of code comments.
- Remove a pointless power off sequence in taos_chip_on.
- Don't bother shutting down the chip when updating the lux table.
The table is held entirely in the driver and doesn't effect the chip at all.
- Drop a redundant i2c call in taos_als_calibrate where the same register
is read twice in a row.
-----BEGIN PGP SIGNATURE-----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=ptGw
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.10b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing
Jonathan writes:
Second round of new device support, cleanups and fixes for IIO in the 4.10 cycle
This includes two branch merges for elements that may also go via MFD.
New device support
* cros_ec
- new driver to support these Chrome OS contiguous sensors which are behind
the Chrome OS embedded controller. Requires a few minor MFD and chrome
platform changes. One follow up fix deals with some dependency issues in
Kconfig.
* mpu-3050
- new driver and device tree bindings for this venerable device.
* st_accel
- support for the lng2dm an
Driver features
* ad7192
- Add DVdd regulator handling
* ad9832
- Add DVDD regulator handling
* at91
- Suspend and resume support
* si7020
- Device tree bindings
* ti-am335x
- DMA support - uses dma to accelerate short bursts of read back rather
than full blown DMA buffer support. Greatly improved performance.
Includes an MFD addition to give access to the address needed for DMA.
* tsl2583
- Device tree bindings
Cleanups and minor fixes
* ad7192
- Fix regulator naming to match datasheet
- Handle regulator errors correctly (so as to not break deferred probing)
- Rename reg variable to reflect which regulator it is
* ad5933
- Fix regulator naming to match datasheet
- Handle regulator errors correctly (so as to not break deferred probing)
* ad7746
- Fix a missing return value (fallout from previous patch set)
* ad7780
- Fix regulator naming to match datasheet
- Handle regulator errors correctly (so as to not break deferred probing)
* ad9832
- Fix regulator naming to match datasheet
- Handle regulator errors correctly (so as to not break deferred probing)
- Rename reg regulator to reflect which one it is
* ad9834
- Fix regulator naming to match datasheet
- Handle regulator errors correctly (so as to not break deferred probing)
* hts221
- Remove a duplicated include
* maxim thermocouple
- Handle a wrong storage side in read function. Prevent any problems that
might be introduced by additions to this driver in future.
* tsl2583 - big set from Brian Masney to drive this towards a staging
graduation.
- Convert to iio_chan_spec and read_raw / write_raw (in a couple of steps)
- Improved error handling in various functions
- Drop redundant power_state custom sysfs attribute.
- Use IIO_*_ATTR* macros for remaining attributes.
- Return an error code to userspace on invalid parameters being writen to
sysfs files.
- Add locking to various attribute accesses to remove possible races.
- Add defines for various magic numbers.
- Use smbus_read_byte_data instead of a write_byte followed by read_byte.
- Query only relevant registers in probe.
- Tidy up ordering of code comments.
- Remove a pointless power off sequence in taos_chip_on.
- Don't bother shutting down the chip when updating the lux table.
The table is held entirely in the driver and doesn't effect the chip at all.
- Drop a redundant i2c call in taos_als_calibrate where the same register
is read twice in a row.
Check whether the ChromeOS Embedded Controller is a sensor hub and in
such case issue a command to get the number of sensors and register them
all.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Use the EC_CMD_GET_FEATURES message to check the supported features for
each MCU.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
[tomeu: adapted to changes in mainline]
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
[enric: remove references to USB PD feature and do it more generic]
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
For the MFD changes:
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Enable system support for the Mellanox Technologies hotplug platform
driver, which provides support for the next Mellanox basic systems:
"msx6710", "msx6720", "msb7700", "msn2700", "msx1410", "msn2410",
"msb7800", "msn2740", "msn2100" and also various number of derivative
systems from the above basic types.
This driver handles hot-plug events for the power suppliers, power
cables and fans for the above systems.
The Kconfig currently controlling compilation of this code is:
driver/platform/x86:config MLX_CPLD_PLATFORM
tristate "Mellanox platform hotplug driver support"
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Bug 150611 uncovered that the WMI ID used by the toshiba-wmi driver
is not Toshiba specific, and as such, the driver was being loaded
on non Toshiba laptops too.
This patch adds a DMI matching list checking for TOSHIBA as the
vendor, refusing to load if it is not.
Also the WMI GUID was renamed, dropping the TOSHIBA_ prefix, to
better reflect that such GUID is not a Toshiba specific one.
Cc: <stable@vger.kernel.org> # 4.4+
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This particular laptop has its motherboard replaced and after that, even
with the latest BIOS, some DMI identification strings have become
"INVALID". This includes DMI_PRODUCT_VERSION which results Wifi being
blocked.
It seems that DMI_BOARD_NAME is still valid so use that as an
alternative for Lenovo Yoga 900.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Fix a Kconfig issue leading potential link failure, and
add a DMI match for an existing quirk.
asus-wmi:
- add SERIO_I8042 dependency
ideapad-laptop:
- Add Lenovo Yoga 910-13IKB to no_hw_rfkill dmi list
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYB7xbAAoJEKbMaAwKp364JZ0IAKbnhIY5UuwIxbShgbKR6o/H
QOosQwHx+ZzGW4jtYRCEMU1uJH5B4CESMlUzPMJSqkpAz4yZyvaLnMnNL1C2QQkV
vzn92owyeuNm1VmWxCBL5EbowcMQyAlWtZik9JEwz9G1nlSOlgOhjH4mfugePJLr
2sCGyfenzXM3otTTB5eGqKg6+4upmf/H8I3HQlu8TUnISslFHahf9czOaFWKwrK6
tm4nWHzx/nx4PcPQm+EvWT5mlsg/+DhFtyzJIqPZypmBuXR2MRaomqe8AugAXcst
iVHxve7CWrw/Oiaa4tESdS/P2KhnLzVbDjUaOyAMLyBu670xBnlieH6Q4jJjd4Y=
=yZrl
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.9-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver fixes from Darren Hart:
"Fix a Kconfig issue leading potential link failure, and add a DMI
match for an existing quirk.
asus-wmi:
- add SERIO_I8042 dependency
ideapad-laptop:
- Add Lenovo Yoga 910-13IKB to no_hw_rfkill dmi list"
* tag 'platform-drivers-x86-v4.9-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
platform/x86: asus-wmi: add SERIO_I8042 dependency
platform/x86: ideapad-laptop: Add Lenovo Yoga 910-13IKB to no_hw_rfkill dmi list
Merge the gup_flags cleanups from Lorenzo Stoakes:
"This patch series adjusts functions in the get_user_pages* family such
that desired FOLL_* flags are passed as an argument rather than
implied by flags.
The purpose of this change is to make the use of FOLL_FORCE explicit
so it is easier to grep for and clearer to callers that this flag is
being used. The use of FOLL_FORCE is an issue as it overrides missing
VM_READ/VM_WRITE flags for the VMA whose pages we are reading
from/writing to, which can result in surprising behaviour.
The patch series came out of the discussion around commit 38e0885465
("mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing"),
which addressed a BUG_ON() being triggered when a page was faulted in
with PROT_NONE set but having been overridden by FOLL_FORCE.
do_numa_page() was run on the assumption the page _must_ be one marked
for NUMA node migration as an actual PROT_NONE page would have been
dealt with prior to this code path, however FOLL_FORCE introduced a
situation where this assumption did not hold.
See
https://marc.info/?l=linux-mm&m=147585445805166
for the patch proposal"
Additionally, there's a fix for an ancient bug related to FOLL_FORCE and
FOLL_WRITE by me.
[ This branch was rebased recently to add a few more acked-by's and
reviewed-by's ]
* gup_flag-cleanups:
mm: replace access_process_vm() write parameter with gup_flags
mm: replace access_remote_vm() write parameter with gup_flags
mm: replace __access_remote_vm() write parameter with gup_flags
mm: replace get_user_pages_remote() write/force parameters with gup_flags
mm: replace get_user_pages() write/force parameters with gup_flags
mm: replace get_vaddr_frames() write/force parameters with gup_flags
mm: replace get_user_pages_locked() write/force parameters with gup_flags
mm: replace get_user_pages_unlocked() write/force parameters with gup_flags
mm: remove write/force parameters from __get_user_pages_unlocked()
mm: remove write/force parameters from __get_user_pages_locked()
mm: remove gup_flags FOLL_WRITE games from __get_user_pages()
This removes the 'write' and 'force' from get_user_pages() and replaces
them with 'gup_flags' to make the use of FOLL_FORCE explicit in callers
as use of this flag can result in surprising behaviour (and hence bugs)
within the mm subsystem.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cleanups, refactoring, and a couple bug fixes.
intel_pmc_core:
- avoid boot time warning for !CONFIG_DEBUGFS_FS
intel_pmc_ipc:
- Convert to use platform_device_register_full
asus-wmi:
- Filter buggy scan codes on ASUS Q500A
toshiba_bluetooth:
- Decouple an error checking status code
toshiba_haps:
- Change logging level from info to debug
- Split ACPI and HDD protection error handling
asus-laptop:
- get rid of parse_arg()
asus-wmi:
- fix asus ux303ub brightness issue
toshiba_acpi:
- Fix typo in *_cooling_method_set function
- Change error checking logic from TCI functions
- Clean up variable declaration
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJX/fUeAAoJEKbMaAwKp364UxoIAMA2UWY9qepIvVW+BA/4vTOH
jqzLVtH0SnhAe1esjsZ3f2r8F0riXEz/pLWcE7cjV7nbmWQDGvSBAJHyALg5d7CJ
lAaMjo+glxy2p/0HgHNWvlgXEhRSsc1slbIJMzwk8XWfX39o+LGU0MNar8uRtQML
TRCFJ73d5maQcQIsZ4hPbPJjzHK3ExyLLimXj5fsFXYnIMBF5YsTfiwdTEnDQmm/
8FIO+fdogSU+LOrS0/CKrpzB/TchapCdvqn0hTJEdRP9wSqHL4c1nk2c0EVywTZT
cwHi3ABvoS7Q2gHl58Y02jeEl3e9rFJQ79Sk3Wxr58mpfqy+w1SwPsjyfnXOB4c=
=AwRb
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.9-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform drivers updates from Darren Hart:
"Cleanups, refactoring, and a couple bug fixes.
intel_pmc_core:
- avoid boot time warning for !CONFIG_DEBUGFS_FS
intel_pmc_ipc:
- Convert to use platform_device_register_full
asus-wmi:
- Filter buggy scan codes on ASUS Q500A
toshiba_bluetooth:
- Decouple an error checking status code
toshiba_haps:
- Change logging level from info to debug
- Split ACPI and HDD protection error handling
asus-laptop:
- get rid of parse_arg()
asus-wmi:
- fix asus ux303ub brightness issue
toshiba_acpi:
- Fix typo in *_cooling_method_set function
- Change error checking logic from TCI functions
- Clean up variable declaration"
* tag 'platform-drivers-x86-v4.9-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
platform/x86: intel_pmc_core: avoid boot time warning for !CONFIG_DEBUGFS_FS
platform/x86: intel_pmc_ipc: Convert to use platform_device_register_full
platform/x86: asus-wmi: Filter buggy scan codes on ASUS Q500A
platform/x86: toshiba_bluetooth: Decouple an error checking status code
platform/x86: toshiba_haps: Change logging level from info to debug
platform/x86: toshiba_haps: Split ACPI and HDD protection error handling
platform/x86: asus-laptop: get rid of parse_arg()
platform/x86: asus-wmi: fix asus ux303ub brightness issue
platform/x86: toshiba_acpi: Fix typo in *_cooling_method_set function
platform/x86: toshiba_acpi: Change error checking logic from TCI functions
platform/x86: toshiba_acpi: Clean up variable declaration
A recent bugfix added a call to i8042_install_filter but did
not add the dependency, leading to possible link errors:
drivers/platform/built-in.o: In function `asus_nb_wmi_quirks':
asus-nb-wmi.c:(.text+0x23af): undefined reference to `i8042_install_filter'
This adds a dependency on SERIO_I8042||SERIO_I8042=n to indicate
that we can build the driver when the i8042 driver is disabled,
but it cannot be built-in when that is a loadable module.
Fixes: b5643539b8 ("platform/x86: asus-wmi: Filter buggy scan codes on ASUS Q500A")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Pull thermal managament updates from Zhang Rui:
- Enhance thermal "userspace" governor to export the reason when a
thermal event is triggered and delivered to user space. From Srinivas
Pandruvada
- Introduce a single TSENS thermal driver for the different versions of
the TSENS IP that exist, on different qcom msm/apq SoCs'. Support for
msm8916, msm8960, msm8974 and msm8996 families is also added. From
Rajendra Nayak
- Introduce hardware-tracked trip points support to the device tree
thermal sensor framework. The framework supports an arbitrary number
of trip points. Whenever the current temperature is changed, the trip
points immediately below and above the current temperature are found,
driver callback is invoked to program the hardware to get notified
when either of the two trip points are triggered. Hardware-tracked
trip points support for rockchip thermal driver is also added at the
same time. From Sascha Hauer, Caesar Wang
- Introduce a new thermal driver, which enables TMU (Thermal Monitor
Unit) on QorIQ platform. From Jia Hongtao
- Introduce a new thermal driver for Maxim MAX77620. From Laxman
Dewangan
- Introduce a new thermal driver for Intel platforms using WhiskeyCove
PMIC. From Bin Gao
- Add mt2701 chip support to MTK thermal driver. From Dawei Chien
- Enhance Tegra thermal driver to enable soctherm node and set
"critical", "hot" trips, for Tegra124, Tegra132, Tegra210. From Wei
Ni
- Add resume support for tango thermal driver. From Marc Gonzalez
- several small fixes and improvements for rockchip, qcom, imx, rcar,
mtk thermal drivers and thermal core code. From Caesar Wang, Keerthy,
Rocky Hao, Wei Yongjun, Peter Robinson, Bui Duc Phuc, Axel Lin, Hugh
Kang
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (48 commits)
thermal: int3403: Process trip change notification
thermal: int340x: New Interface to read trip and notify
thermal: user_space gov: Add additional information in uevent
thermal: Enhance thermal_zone_device_update for events
arm64: tegra: set hot trips for Tegra210
arm64: tegra: set critical trips for Tegra210
arm64: tegra: add soctherm node for Tegra210
arm64: tegra: set hot trips for Tegra132
arm64: tegra: set critical trips for Tegra132
arm64: tegra: use tegra132-soctherm for Tegra132
arm: tegra: set hot trips for Tegra124
arm: tegra: set critical trips for Tegra124
thermal: tegra: add hw-throttle for Tegra132
thermal: tegra: add hw-throttle function
of: Add bindings of hw throttle for Tegra soctherm
thermal: mtk_thermal: Check return value of devm_thermal_zone_of_sensor_register
thermal: Add Mediatek thermal driver for mt2701.
dt-bindings: thermal: Add binding document for Mediatek thermal controller
thermal: max77620: Add thermal driver for reporting junction temp
thermal: max77620: Add DT binding doc for thermal driver
...
The Lenovo Yoga 910-13IKB does not have a hw rfkill switch, and trying
to read the hw rfkill switch through the ideapad module causes it to
always report as blocked.
This commit adds the Lenovo Yoga 910-13IKB to the no_hw_rfkill dmi list,
fixing the WiFI breakage.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
While looking at a patch that introduced a compile-time warning
"‘pmc_core_dev_state_get’ defined but not used" (I sent a patch
for debugfs to fix it), I noticed that the same patch caused
it in intel_pmc_core also introduced a bogus run-time warning:
"PMC Core: debugfs register failed".
The problem is the IS_ERR_OR_NULL() check that as usual gets
things wrong: when CONFIG_DEBUGFS_FS is disabled,
debugfs_create_dir() fails with an error code, and we don't
need to warn about it, unlike the case in which it returns
NULL.
This reverts the driver to the previous state of not warning
about CONFIG_DEBUGFS_FS being disabled. I chose not to
restore the driver to making a runtime error in debugfs
fatal in pmc_core_probe().
Fixes: df2294fb64 ("intel_pmc_core: Convert to DEFINE_DEBUGFS_ATTRIBUTE")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Pull uaccess.h prepwork from Al Viro:
"Preparations to tree-wide switch to use of linux/uaccess.h (which,
obviously, will allow to start unifying stuff for real). The last step
there, ie
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
`git grep -l "$PATT"|grep -v ^include/linux/uaccess.h`
is not taken here - I would prefer to do it once just before or just
after -rc1. However, everything should be ready for it"
* 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
remove a stray reference to asm/uaccess.h in docs
sparc64: separate extable_64.h, switch elf_64.h to it
score: separate extable.h, switch module.h to it
mips: separate extable.h, switch module.h to it
x86: separate extable.h, switch sections.h to it
remove stray include of asm/uaccess.h from cacheflush.h
mn10300: remove a bogus processor.h->uaccess.h include
xtensa: split uaccess.h into C and asm sides
bonding: quit messing with IOCTL
kill __kernel_ds_p off
mn10300: finish verify_area() off
frv: move HAVE_ARCH_UNMAPPED_AREA to pgtable.h
exceptions: detritus removal
Pull more vfs updates from Al Viro:
">rename2() work from Miklos + current_time() from Deepa"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Replace current_fs_time() with current_time()
fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps
fs: Replace CURRENT_TIME with current_time() for inode timestamps
fs: proc: Delete inode time initializations in proc_alloc_inode()
vfs: Add current_time() api
vfs: add note about i_op->rename changes to porting
fs: rename "rename2" i_op to "rename"
vfs: remove unused i_op->rename
fs: make remaining filesystems use .rename2
libfs: support RENAME_NOREPLACE in simple_rename()
fs: support RENAME_NOREPLACE for local filesystems
ncpfs: fix unused variable warning
- Add the MFD bindings doc to MAINTAINERS
- New Drivers
- X-Powers AC100 Audio CODEC and RTC
- TI LP873x PMIC
- Rockchip RK808 PMIC
- Samsung Exynos Low Power Audio
- New Device Support
- Add support for STMPE1600 variant to stmpe
- Add support for PM8018 PMIC to pm8921-core
- Add support for AXP806 PMIC in axp20x
- Add support for AXP209 GPIO in axp20x
- New Functionality
- Add support for Reset to all STMPE variants
- Add support for MKBP event support to cros_ec
- Add support for USB to intel_soc_pmic_bxtwc
- Add support for IRQs and Power Button to tps65217
- Fix-ups
- Clean-up defunct author emails; da9063, max14577
- Kconfig fixups; wm8350-i2c, as3722
- Constify; altera-a10sr, sm501
- Supply PCI IDs; intel-lpss-pci
- Improve clocking; qcom_rpm
- Fix IRQ probing; ucb1x00-core
- Ensure fault log is cleared; da9052
- Remove NO_IRQ check; ucb1x00-core
- Supply I2C properties; intel-lpss-acpi, intel-lpss-pci
- Non standard declaration; tps65217, max8997-irq
- Remove unused code; lp873x, db8500-prcmu, ab8500-debugfs,
cros_ec_spi
- Make non-modular; altera-a10sr, intel_msic, smsc-ece1099,
sun6i-prcm, twl-core,
- OF bindings; ac100, stmpe, qcom-pm8xxx, qcom-rpm, rk808,
axp20x, lp873x, exynos5433-lpass, act8945a,
aspeed-scu, twl6040, arizona
- Bug Fixes
- Release OF pointer; qcom_rpm
- Avoid double shifting in suspend/resume; 88pm80x
- Fix 'defined but not used' error; exynos-lpass
- Fix 'sleeping whilst attomic'; atmel-hlcdc
-----BEGIN PGP SIGNATURE-----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=Ja7p
-----END PGP SIGNATURE-----
Merge tag 'mfd-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core framework:
- Add the MFD bindings doc to MAINTAINERS
New drivers:
- X-Powers AC100 Audio CODEC and RTC
- TI LP873x PMIC
- Rockchip RK808 PMIC
- Samsung Exynos Low Power Audio
New device support:
- Add support for STMPE1600 variant to stmpe
- Add support for PM8018 PMIC to pm8921-core
- Add support for AXP806 PMIC in axp20x
- Add support for AXP209 GPIO in axp20x
New functionality:
- Add support for Reset to all STMPE variants
- Add support for MKBP event support to cros_ec
- Add support for USB to intel_soc_pmic_bxtwc
- Add support for IRQs and Power Button to tps65217
Fix-ups:
- Clean-up defunct author emails (da9063, max14577)
- Kconfig fixups (wm8350-i2c, as37220
- Constify (altera-a10sr, sm501)
- Supply PCI IDs (intel-lpss-pci)
- Improve clocking (qcom_rpm)
- Fix IRQ probing (ucb1x00-core)
- Ensure fault log is cleared (da9052)
- Remove NO_IRQ check (ucb1x00-core)
- Supply I2C properties (intel-lpss-acpi, intel-lpss-pci)
- Non standard declaration (tps65217, max8997-irq)
- Remove unused code (lp873x, db8500-prcmu, ab8500-debugfs,
cros_ec_spi)
- Make non-modular (altera-a10sr, intel_msic, smsc-ece1099,
sun6i-prcm, twl-core)
- OF bindings (ac100, stmpe, qcom-pm8xxx, qcom-rpm, rk808, axp20x,
lp873x, exynos5433-lpass, act8945a, aspeed-scu, twl6040, arizona)
Bugfixes:
- Release OF pointer (qcom_rpm)
- Avoid double shifting in suspend/resume (88pm80x)
- Fix 'defined but not used' error (exynos-lpass)
- Fix 'sleeping whilst attomic' (atmel-hlcdc)"
* tag 'mfd-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits)
mfd: arizona: Handle probe deferral for reset GPIO
mfd: arizona: Remove arizona_of_get_named_gpio helper function
mfd: arizona: Add DT options for max_channels_clocked and PDM speaker config
mfd: twl6040: Register child device for twl6040-pdmclk
mfd: cros_ec_spi: Remove unused variable 'request'
mfd: omap-usb-host: Return value is not 'const int'
mfd: ab8500-debugfs: Remove 'weak' function suspend_test_wake_cause_interrupt_is_mine()
mfd: ab8500-debugfs: Remove ab8500_dump_all_banks_to_mem()
mfd: db8500-prcmu: Remove unused *prcmu_set_ddr_opp() calls
mfd: ab8500-debugfs: Prevent initialised field from being over-written
mfd: max8997-irq: 'inline' should be at the beginning of the declaration
mfd: rk808: Fix RK818_IRQ_DISCHG_ILIM initializer
mfd: tps65217: Fix nonstandard declaration
mfd: lp873x: Remove unused mutex lock from struct lp873x
mfd: atmel-hlcdc: Do not sleep in atomic context
mfd: exynos-lpass: Mark PM functions as __maybe_unused
mfd: intel-lpss: Add default I2C device properties for Apollo Lake
mfd: twl-core: Make it explicitly non-modular
mfd: sun6i-prcm: Make it explicitly non-modular
mfd: smsc-ece1099: Make it explicitly non-modular
...
Use platform_device_register_full() instead of open-coded.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
ACPI WDAT table is the preferred way to use hardware watchdog over the
native iTCO_wdt. Windows only uses this table for its hardware watchdog
implementation so we should be relatively safe to trust it has been
validated by OEMs.
Prevent iTCO watchdog creation if we detect that there is an ACPI WDAT
table.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
drivers/platform/x86/dell-smo8800.c is touched due to the following obscenity:
drivers/platform/x86/dell-smo8800.c ->
linux/interrupt.h ->
linux/hardirq.h ->
asm/hardirq.h ->
linux/irq.h ->
asm/hw_irq.h ->
asm/sections.h ->
asm/uaccess.h
is the only chain of includes pulling asm/uaccess.h there.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
current_fs_time() uses struct super_block* as an argument.
As per Linus's suggestion, this is changed to take struct
inode* as a parameter instead. This is because the function
is primarily meant for vfs inode timestamps.
Also the function was renamed as per Arnd's suggestion.
Change all calls to current_fs_time() to use the new
current_time() function instead. current_fs_time() will be
deleted.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Added one additional parameter to thermal_zone_device_update() to provide
caller with an optional capability to specify reason.
Currently this event is used by user space governor to trigger different
processing based on event code. Also it saves an additional call to read
temperature when the event is received.
The following events are cuurently defined:
- Unspecified event
- New temperature sample
- Trip point violated
- Trip point changed
- thermal device up and down
- thermal device power capability changed
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Some revisions of the ASUS Q500A series have a keyboard related
issue which is reproducible only after Windows with installed ASUS
tools is started.
In this case the Linux side will have a blocked keyboard or
report incorrect or incomplete hotkey events.
To make Linux work properly again, a complete power down
(unplug power supply and remove battery) is needed.
Linux/atkbd after a clean start will get the following code on VOLUME_UP
key: {0xe0, 0x30, 0xe0, 0xb0}. After Windows, the same key will generate
this codes: {0xe1, 0x23, 0xe0, 0x30, 0xe0, 0xb0}. As result atkdb will
be confused by buggy codes.
This patch is filtering this buggy code out.
https://bugzilla.kernel.org/show_bug.cgi?id=119391
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Cc: Alex Henrie <alexhenrie24@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Corentin Chary <corentin.chary@gmail.com>
Cc: acpi4asus-user@lists.sourceforge.net
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
[dvhart: Add return after pr_warn to avoid false confirmation of filter]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch simply decouples the error checking of the ACPI status and
the actual BT status, as those two were nested in an if/else check, but
are completely unrelated.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Two of the internal functions are printing an info message, one
whenever the HDD protection level changes, and another when the
driver receives an ACPI event.
This patch changes those two prints to debug, as that information
is more pertaining to debuging purposes.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Currently the code checking for the ACPI status is mixed along with
the actual HDD protection status check.
This patch splits those two checks as they are not related, printing
an error string in case the ACPI call failed, and then check for
actual HDD protection status.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
parse_arg() duplicates the funcionality of kstrtoint() so use the latter
function instead. There is no funcionality change except that in the
case of input being too big -ERANGE will be returned instead of -EINVAL
which is not bad because -ERANGE makes more sense here. The check for
!count is already done by the sysfs core so no need to duplicate it
again. Also, add some minor corrections to error handling to accommodate
the change in return values (parse_arg returned count if everything
succeeded whereas kstrtoint returns 0 in the same situation)
As a result of this patch asus-laptop.ko size is reduced by almost 1%:
add/remove: 0/1 grow/shrink: 1/6 up/down: 1/-149 (-148)
function old new delta
__UNIQUE_ID_vermagic0 69 70 +1
ls_switch_store 133 117 -16
ledd_store 175 159 -16
display_store 157 141 -16
ls_level_store 193 176 -17
gps_store 200 178 -22
sysfs_acpi_set.isra 148 125 -23
parse_arg.part 39 - -39
Total: Before=19160, After=19012, chg -0.77%
Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
acpi_video0 doesn't work, asus-wmi brightness interface doesn't work, too.
So, we use native brightness interface to handle the brightness adjustion,
and add quirk_asus_ux303ub.
Signed-off-by: zino lin <linzino7@gmail.com>
Acked-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch simply fixes a typo in the error string printed in
the *_cooling_method_set function.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Currently the success/error checking logic is intermixed, making the
code a bit cumbersome to understand.
This patch changes the affected functions to first check for errors
and take appropriate actions, then check for the supported features.
This patch also separates the error check from the acpi_status and
the tci_raw function call error check, as those two are completely
unrelated and were nested in if/else statements.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch moves all the multiple line variable declaration to a
single line declaration (except variables being initialized)
following the reverse tree order, to conform to the practices
of the kernel.
[dvhart: corrected a couple minor inconsistencies in declaration ordering]
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Newer revisions of the ChromeOS EC add more events besides the keyboard
ones. So handle interrupts in the MFD driver and let consumers register
for notifications for the events they might care.
To keep backward compatibility, if the EC doesn't support MKBP event, we
fall back to the old MKBP key matrix host command.
Cc: Randall Spangler <rspangler@chromium.org>
Cc: Vincent Palatin <vpalatin@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Signed-off-by: Vic Yang <victoryang@google.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The Kconfig entry controlling compilation of this code is:
drivers/platform/x86/Kconfig:config GPIO_INTEL_PMIC
drivers/platform/x86/Kconfig: bool "Intel PMIC GPIO support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.
We delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
We don't replace module.h with init.h since the file already has that.
Cc: Alek Du <alek.du@intel.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The Kconfig entry controlling compilation of this code is:
arch/x86/Kconfig:config OLPC
arch/x86/Kconfig: bool "One Laptop Per Child support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.
We delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
WMI event 0xe00e is received when battery was removed or inserted.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This set of changes improve some aspects of the atomic API as well as
make use of this new API in the regulator framework to allow properly
dealing with critical regulators controlled by a PWM.
Aside from that there's a bunch of updates and cleanups for existing
drivers, as well as the addition of new drivers for the Broadcom iProc,
STMPE and ChromeOS EC controllers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=TdEI
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This set of changes improve some aspects of the atomic API as well as
make use of this new API in the regulator framework to allow properly
dealing with critical regulators controlled by a PWM.
Aside from that there's a bunch of updates and cleanups for existing
drivers, as well as the addition of new drivers for the Broadcom
iProc, STMPE and ChromeOS EC controllers"
* tag 'pwm/for-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits)
regulator: pwm: Document pwm-dutycycle-unit and pwm-dutycycle-range
regulator: pwm: Support extra continuous mode cases
pwm: Add ChromeOS EC PWM driver
dt-bindings: pwm: Add binding for ChromeOS EC PWM
mfd: cros_ec: Add EC_PWM function definitions
mfd: cros_ec: Add cros_ec_cmd_xfer_status() helper
pwm: atmel: Use of_device_get_match_data()
pwm: atmel: Fix checkpatch warnings
pwm: atmel: Fix disabling of PWM channels
dt-bindings: pwm: Add R-Car H3 device tree bindings
pwm: rcar: Use ARCH_RENESAS
pwm: tegra: Add support for Tegra186
dt-bindings: pwm: tegra: Add compatible string for Tegra186
pwm: tegra: Avoid overflow when calculating duty cycle
pwm: tegra: Allow 100 % duty cycle
pwm: tegra: Add support for reset control
pwm: tegra: Rename mmio_base to regs
pwm: tegra: Remove useless padding
pwm: tegra: Drop NUM_PWM macro
pwm: lpc32xx: Set PWM_PIN_LEVEL bit to default value
...
Merge drm updates from Dave Airlie:
"This is the main drm pull request for 4.8.
I'm down with a cold at the moment so hopefully this isn't in too bad
a state, I finished pulling stuff last week mostly (nouveau fixes just
went in today), so only this message should be influenced by illness.
Apologies to anyone who's major feature I missed :-)
Core:
Lockless GEM BO freeing
Non-blocking atomic work
Documentation changes (rst/sphinx)
Prep for new fencing changes
Simple display helpers
Master/auth changes
Register/unregister rework
Loads of trivial patches/fixes.
New stuff:
ARM Mali display driver (not the 3D chip)
sii902x RGB->HDMI bridge
Panel:
Support for new panels
Improved backlight support
Bridge:
Convert ADV7511 to bridge driver
ADV7533 support
TC358767 (DSI/DPI to eDP) encoder chip support
i915:
BXT support enabled by default
GVT-g infrastructure
GuC command submission and fixes
BXT workarounds
SKL/BKL workarounds
Demidlayering device registration
Thundering herd fixes
Missing pci ids
Atomic updates
amdgpu/radeon:
ATPX improvements for better dGPU power control on PX systems
New power features for CZ/BR/ST
Pipelined BO moves and evictions in TTM
GPU scheduler improvements
GPU reset improvements
Overclocking on dGPUs with amdgpu
Polaris powermanagement enabled
nouveau:
GK20A/GM20B volt and clock improvements.
Initial support for GP100/GP104 GPUs, GP104 will not yet support
acceleration due to NVIDIA having not released firmware for them as of yet.
exynos:
Exynos5433 SoC with IOMMU support.
vc4:
Shader validation for branching
imx-drm:
Atomic mode setting conversion
Reworked DMFC FIFO allocation
External bridge support
analogix-dp:
RK3399 eDP support
Lots of fixes.
rockchip:
Lots of small fixes.
msm:
DT bindings cleanups
Shrinker and madvise support
ASoC HDMI codec support
tegra:
Host1x driver cleanups
SOR reworking for DP support
Runtime PM support
omapdrm:
PLL enhancements
Header refactoring
Gamma table support
arcgpu:
Simulator support
virtio-gpu:
Atomic modesetting fixes.
rcar-du:
Misc fixes.
mediatek:
MT8173 HDMI support
sti:
ASOC HDMI codec support
Minor fixes
fsl-dcu:
Suspend/resume support
Bridge support
amdkfd:
Minor fixes.
etnaviv:
Enable GPU clock gating
hisilicon:
Vblank and other fixes"
* tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linux: (1575 commits)
drm/nouveau/gr/nv3x: fix instobj write offsets in gr setup
drm/nouveau/acpi: fix lockup with PCIe runtime PM
drm/nouveau/acpi: check for function 0x1B before using it
drm/nouveau/acpi: return supported DSM functions
drm/nouveau/acpi: ensure matching ACPI handle and supported functions
drm/nouveau/fbcon: fix font width not divisible by 8
drm/amd/powerplay: remove enable_clock_power_gatings_tasks from initialize and resume events
drm/amd/powerplay: move clockgating to after ungating power in pp for uvd/vce
drm/amdgpu: add query device id and revision id into system info entry at CGS
drm/amdgpu: add new definition in bif header
drm/amd/powerplay: rename smum header guards
drm/amdgpu: enable UVD context buffer for older HW
drm/amdgpu: fix default UVD context size
drm/amdgpu: fix incorrect type of info_id
drm/amdgpu: make amdgpu_cgs_call_acpi_method as static
drm/amdgpu: comment out unused defaults_staturn_pro static const structure to fix the build
drm/amdgpu: enable UVD VM only on polaris
drm/amdgpu: increase timeout of IB test
drm/amdgpu: add destroy session when generate VCE destroy msg.
drm/amd: fix deadlock of job_list_lock V2
...
Pull watchdog updates from Wim Van Sebroeck:
"Core:
- min and max timeout improvements, WDOG_HW_RUNNING improvements,
status funtionality
- Add a device managed API for watchdog_register_device()
New watchdog drivers:
- Aspeed SoCs
- Maxim PMIC MAX77620
- Amlogic Meson GXBB SoC
Enhancements:
- support for the r8a7796 watchdog device
- support for F81866 watchdog device
- support for 5th variation of Apollo Lake
- support for MCP78S chipset
- clean-up of softdog.c watchdog device driver
- pic32-wdt and pic32-dmt fixes
- Documentation/watchdog: watchdog-test improvements
- several other fixes and improvements"
* git://www.linux-watchdog.org/linux-watchdog: (50 commits)
watchdog: gpio_wdt: Fix missing platform_set_drvdata() in gpio_wdt_probe()
watchdog: core: Clear WDOG_HW_RUNNING before calling the stop function
watchdog: core: Fix error handling of watchdog_dev_init()
watchdog: pic32-wdt: Fix return value check in pic32_wdt_drv_probe()
watchdog: pic32-dmt: Remove .owner field for driver
watchdog: pic32-wdt: Remove .owner field for driver
watchdog: renesas-wdt: Add support for the r8a7796 wdt
Documentation/watchdog: check return value for magic close
watchdog: sbsa: Drop status function
watchdog: Implement status function in watchdog core
watchdog: tangox: Set max_hw_heartbeat_ms instead of max_timeout
watchdog: change watchdog_need_worker logic
watchdog: add support for MCP78S chipset in nv_tco
watchdog: bcm2835_wdt: remove redundant ->set_timeout callback
watchdog: bcm2835_wdt: constify _ops and _info structures
dt-bindings: watchdog: Add Meson GXBB Watchdog bindings
watchdog: Add Meson GXBB Watchdog Driver
watchdog: qcom: configure BARK time in addition to BITE time
watchdog: qcom: add option for standalone watchdog not in timer block
watchdog: qcom: update device tree bindings
...
A few more simple fixes that Sean&I collected. There's a bunch of bigger
things on dri-devel, but I think those are all too late for 4.8 really.
I'll try and go collect them after -rc1 for 4.9.
* tag 'topic/drm-misc-2016-07-28' of git://anongit.freedesktop.org/drm-intel:
drm/arm: mali-dp: Fix error return code in malidp_bind()
drm/arm: mali-dp: Remove redundant dev_err call in malidp_bind()
drm/gma500: remove unnecessary stub for fb_ioctl()
apple-gmux: Sphinxify docs
drm/arm: mali-dp: Set crtc.port to the port instead of the endpoint
drm/sti: use new Reset API
drm/etnaviv: Optimize error handling in etnaviv_gem_new_userptr()
drm/etnaviv: Delete unnecessary checks before two function calls
drm/vmwgfx: Delete an unnecessary check before the function call "vfree"
drm/qxl: Delete an unnecessary check before drm_gem_object_unreference_unlocked()
drm/mgag200: Delete an unnecessary check before drm_gem_object_unreference_unlocked()
drm/bridge: ps8622: Delete an unnecessary check before backlight_device_unregister()
GPU-DRM-GMA500: Delete unnecessary checks before two function calls
GPU-DRM-OMAP: Delete unnecessary checks before two function calls
Convert asciidoc-formatted docs to rst in accordance with Jonathan's and
Jani's effort to use sphinx for kernel-doc rendering in 4.8.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/4c1b29986fa77772156b1af0c965d3799e43a47b.1467628307.git.lukas@wunner.de
Several new quirks and tweaks for new platforms to existing laptop drivers. A
new ACPI virtual power button driver, similar to the intel-hid driver. A rework
of the dell keymap, using a single sparse keymap for all machines. A few fixes
and cleanups.
intel-vbtn:
- new driver for Intel Virtual Button
intel_pmc_core:
- Convert to DEFINE_DEBUGFS_ATTRIBUTE
fujitsu-laptop:
- Rework brightness of eco led
asus-wmi:
- Add quirk_no_rfkill_wapf4 for the Asus X456UA
- Add quirk_no_rfkill_wapf4 for the Asus X456UF
- Add quirk_no_rfkill for the Asus Z550MA
- Add quirk_no_rfkill for the Asus U303LB
- Add quirk_no_rfkill for the Asus N552VW
- Create quirk for airplane_mode LED
- Add ambient light sensor toggle key
asus-wireless:
- Toggle airplane mode LED
intel_telemetry:
- Remove Monitor MWAIT feature dependency
intel-hid:
- Remove duplicated acpi_remove_notify_handler
fujitsu-laptop:
- Add support for eco LED
- Support touchpad toggle hotkey on Skylake-based models
- Remove unused macros
- Use module name in debug messages
hp-wmi:
- Fix wifi cannot be hard-unblocked
toshiba_acpi:
- Bump driver version and update copyright year
- Remove the position sysfs entry
- Add IIO interface for accelerometer axis data
dell-wmi:
- Add a WMI event code for display on/off
- Generate one sparse keymap for all machines
- Add information about other WMI event codes
- Sort WMI event codes and update comments
- Ignore WMI event code 0xe045
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXl8kKAAoJEKbMaAwKp364UggH/R1vy4IQmvXh4A/VDlAUp4Cs
6Wi71WTBbzFm63wVdHFZpeXzlzBCLEp+XVQI6M4BSQYulfRCWogiRmV7npLXn8Mv
M2JnmV87n0u3bHT5Fn920mC0OeTMHV5YaEap8N3ys0Ej56aHEgjsQYJjjSIz1OpM
1uQTxufiMgUhX0PQskhNnrz+wnIeKatvP/EyxeFsW58T+FXr4xF8VNaqXgNbz1NL
UcWOh580nE92I1UuYjAnC2bi1oi4x63vNL2xgll8Tc0rRuPJWB15Sc7zxdhVLhqX
rV9Mjiu8FLKilQgwzPHm3QGb8o54prJZIUtAKp1qunwlDiM3n+5qrIW7+4GUfyo=
=JSkT
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.8-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x8 platform driver updates from Darren Hart:
"Several new quirks and tweaks for new platforms to existing laptop
drivers. A new ACPI virtual power button driver, similar to the
intel-hid driver. A rework of the dell keymap, using a single sparse
keymap for all machines. A few fixes and cleanups.
Summary:
intel-vbtn:
- new driver for Intel Virtual Button
intel_pmc_core:
- Convert to DEFINE_DEBUGFS_ATTRIBUTE
fujitsu-laptop:
- Rework brightness of eco led
asus-wmi:
- Add quirk_no_rfkill_wapf4 for the Asus X456UA
- Add quirk_no_rfkill_wapf4 for the Asus X456UF
- Add quirk_no_rfkill for the Asus Z550MA
- Add quirk_no_rfkill for the Asus U303LB
- Add quirk_no_rfkill for the Asus N552VW
- Create quirk for airplane_mode LED
- Add ambient light sensor toggle key
asus-wireless:
- Toggle airplane mode LED
intel_telemetry:
- Remove Monitor MWAIT feature dependency
intel-hid:
- Remove duplicated acpi_remove_notify_handler
fujitsu-laptop:
- Add support for eco LED
- Support touchpad toggle hotkey on Skylake-based models
- Remove unused macros
- Use module name in debug messages
hp-wmi:
- Fix wifi cannot be hard-unblocked
toshiba_acpi:
- Bump driver version and update copyright year
- Remove the position sysfs entry
- Add IIO interface for accelerometer axis data
dell-wmi:
- Add a WMI event code for display on/off
- Generate one sparse keymap for all machines
- Add information about other WMI event codes
- Sort WMI event codes and update comments
- Ignore WMI event code 0xe045"
* tag 'platform-drivers-x86-v4.8-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (26 commits)
intel-vbtn: new driver for Intel Virtual Button
intel_pmc_core: Convert to DEFINE_DEBUGFS_ATTRIBUTE
fujitsu-laptop: Rework brightness of eco led
asus-wmi: Add quirk_no_rfkill_wapf4 for the Asus X456UA
asus-wmi: Add quirk_no_rfkill_wapf4 for the Asus X456UF
asus-wmi: Add quirk_no_rfkill for the Asus Z550MA
asus-wmi: Add quirk_no_rfkill for the Asus U303LB
asus-wmi: Add quirk_no_rfkill for the Asus N552VW
asus-wmi: Create quirk for airplane_mode LED
asus-wireless: Toggle airplane mode LED
intel_telemetry: Remove Monitor MWAIT feature dependency
intel-hid: Remove duplicated acpi_remove_notify_handler
asus-wmi: Add ambient light sensor toggle key
fujitsu-laptop: Add support for eco LED
fujitsu-laptop: Support touchpad toggle hotkey on Skylake-based models
fujitsu-laptop: Remove unused macros
fujitsu-laptop: Use module name in debug messages
hp-wmi: Fix wifi cannot be hard-unblocked
toshiba_acpi: Bump driver version and update copyright year
toshiba_acpi: Remove the position sysfs entry
...
Pull x86 platform updates from Ingo Molnar:
"The main changes in this cycle were:
- Intel-SoC enhancements (Andy Shevchenko)
- Intel CPU symbolic model definition rework (Dave Hansen)
- ... other misc changes"
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
x86/sfi: Enable enumeration of SD devices
x86/pci: Use MRFLD abbreviation for Merrifield
x86/platform/intel-mid: Make vertical indentation consistent
x86/platform/intel-mid: Mark regulators explicitly defined
x86/platform/intel-mid: Rename mrfl.c to mrfld.c
x86/platform/intel-mid: Enable spidev on Intel Edison boards
x86/platform/intel-mid: Extend PWRMU to support Penwell
x86/pci, x86/platform/intel_mid_pci: Remove duplicate power off code
x86/platform/intel-mid: Add pinctrl for Intel Merrifield
x86/platform/intel-mid: Enable GPIO expanders on Edison
x86/platform/intel-mid: Add Power Management Unit driver
x86/platform/atom/punit: Enable support for Merrifield
x86/platform/intel_mid_pci: Rework IRQ0 workaround
x86, thermal: Clean up and fix CPU model detection for intel_soc_dts_thermal
x86, mmc: Use Intel family name macros for mmc driver
x86/intel_telemetry: Use Intel family name macros for telemetry driver
x86/acpi/lss: Use Intel family name macros for the acpi_lpss driver
x86/cpufreq: Use Intel family name macros for the intel_pstate cpufreq driver
x86/platform: Use new Intel model number macros
x86/intel_idle: Use Intel family macros for intel_idle
...
Pull perf updates from Ingo Molnar:
"With over 300 commits it's been a busy cycle - with most of the work
concentrated on the tooling side (as it should).
The main kernel side enhancements were:
- Add per event callchain limit: Recently we introduced a sysctl to
tune the max-stack for all events for which callchains were
requested:
$ sysctl kernel.perf_event_max_stack
kernel.perf_event_max_stack = 127
Now this patch introduces a way to configure this per event, i.e.
this becomes possible:
$ perf record -e sched:*/max-stack=2/ -e block:*/max-stack=10/ -a
allowing finer tuning of how much buffer space callchains use.
This uses an u16 from the reserved space at the end, leaving
another u16 for future use.
There has been interest in even finer tuning, namely to control the
max stack for kernel and userspace callchains separately. Further
discussion is needed, we may for instance use the remaining u16 for
that and when it is present, assume that the sample_max_stack
introduced in this patch applies for the kernel, and the u16 left
is used for limiting the userspace callchain (Arnaldo Carvalho de
Melo)
- Optimize AUX event (hardware assisted side-band event) delivery
(Kan Liang)
- Rework Intel family name macro usage (this is partially x86 arch
work) (Dave Hansen)
- Refine and fix Intel LBR support (David Carrillo-Cisneros)
- Add support for Intel 'TopDown' events (Andi Kleen)
- Intel uncore PMU driver fixes and enhancements (Kan Liang)
- ... other misc changes.
Here's an incomplete list of the tooling enhancements (but there's
much more, see the shortlog and the git log for details):
- Support cross unwinding, i.e. collecting '--call-graph dwarf'
perf.data files in one machine and then doing analysis in another
machine of a different hardware architecture. This enables, for
instance, to do:
$ perf record -a --call-graph dwarf
on a x86-32 or aarch64 system and then do 'perf report' on it on a
x86_64 workstation (He Kuang)
- Allow reading from a backward ring buffer (one setup via
sys_perf_event_open() with perf_event_attr.write_backward = 1)
(Wang Nan)
- Finish merging initial SDT (Statically Defined Traces) support, see
cset comments for details about how it all works (Masami Hiramatsu)
- Support attaching eBPF programs to tracepoints (Wang Nan)
- Add demangling of symbols in programs written in the Rust language
(David Tolnay)
- Add support for tracepoints in the python binding, including an
example, that sets up and parses sched:sched_switch events,
tools/perf/python/tracepoint.py (Jiri Olsa)
- Introduce --stdio-color to set up the color output mode selection
in 'annotate' and 'report', allowing emit color escape sequences
when redirecting the output of these tools (Arnaldo Carvalho de
Melo)
- Add 'callindent' option to 'perf script -F', to indent the Intel PT
call stack, making this output more ftrace-like (Adrian Hunter,
Andi Kleen)
- Allow dumping the object files generated by llvm when processing
eBPF scriptlet events (Wang Nan)
- Add stackcollapse.py script to help generating flame graphs (Paolo
Bonzini)
- Add --ldlat option to 'perf mem' to specify load latency for loads
event (e.g. cpu/mem-loads/ ) (Jiri Olsa)
- Tooling support for Intel TopDown counters, recently added to the
kernel (Andi Kleen)"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (303 commits)
perf tests: Add is_printable_array test
perf tools: Make is_printable_array global
perf script python: Fix string vs byte array resolving
perf probe: Warn unmatched function filter correctly
perf cpu_map: Add more helpers
perf stat: Balance opening and reading events
tools: Copy linux/{hash,poison}.h and check for drift
perf tools: Remove include/linux/list.h from perf's MANIFEST
tools: Copy the bitops files accessed from the kernel and check for drift
Remove: kernel unistd*h files from perf's MANIFEST, not used
perf tools: Remove tools/perf/util/include/linux/const.h
perf tools: Remove tools/perf/util/include/asm/byteorder.h
perf tools: Add missing linux/compiler.h include to perf-sys.h
perf jit: Remove some no-op error handling
perf jit: Add missing curly braces
objtool: Initialize variable to silence old compiler
objtool: Add -I$(srctree)/tools/arch/$(ARCH)/include/uapi
perf record: Add --tail-synthesize option
perf session: Don't warn about out of order event if write_backward is used
perf tools: Enable overwrite settings
...
So that callers of cros_ec_cmd_xfer() don't have to repeat boilerplate
code when checking for errors from the EC side.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Vadim Pasternak