Increase the default timeout values for boot (100ms to 2sec) and
IPC message sending (5ms to 500ms). The values should be overridden
with values from platform data.
There is no functional need to have such short timeouts as both boot
and IPC send errors are considered fatal errors. More relaxed timeouts
are convenient when running the driver on top of emulation such as QEMU.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not hardcode IPC timeout value in ipc.c, but rather use the timeout
value configured during device probe. For platforms that do not override
the IPC timeout, default value TIMEOUT_DEFAULT_IPC_MS has already been
defined in core.c.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove duplicated code by using a common helper function
to send the PCM_FREE IPC message to FW.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When application goes through SUSPEND/STOP->PREPARE->START
cycle, we should always reprogram the SOF device to start
DMA from a known state so that hw_ptr/appl_ptrs remain valid.
This is expected by ALSA core as it resets the buffer
state as part of prepare (see snd_pcm_do_prepare()).
Fix the issue by forcing reconfiguration of the FW with
STREAM_PCM_PARAMS in prepare(). Use combined logic to handle
prepare and the existing flow to reprogram hw-params after
system suspend.
Without the fix, first call to pcm pointer() will return
an invalid hw_ptr and application may immediately observe XRUN
status, unless "start_threshold" SW parameter is set to maximum
value by the application.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If last_busy value is not set at runtime PM enable, the device will be
suspend immediately after usage counter is 0. Set the last_busy value to
make sure delay is working at first boot up.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Downgrade "nothing to do in IRQ thread" message from error to a debug
message in the IPC interrupt handler thread.
The spurious wake-up can happen if a HDA stream interrupt is
raised while the IPC interrupt thread is running. IPC functionality
is not impacted by this condition, so debug is a more appropriate
trace level.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_hdac_ext_bus_device_exit() has been recently modified
to no longer free the hdac device. SOF allocates memory for
hdac_device and hda_hda_priv with kzalloc. Make them
device-managed instead so that they will be freed when the
SOF driver is unloaded.
Because of the above change, hda_codec is device-managed and
it will be freed when the ASoC device is removed. Freeing
the codec in snd_hda_codec_dev_release() leads to kernel
panic while unloading and reloading the ASoC driver. So,
avoid freeing the hda_codec for ASoC driver. This is done in
the same patch to avoid bisect failure.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20190626070450.7229-1-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- A fair pile of RST conversions, many from Mauro. These create more
than the usual number of simple but annoying merge conflicts with other
trees, unfortunately. He has a lot more of these waiting on the wings
that, I think, will go to you directly later on.
- A new document on how to use merges and rebases in kernel repos, and one
on Spectre vulnerabilities.
- Various improvements to the build system, including automatic markup of
function() references because some people, for reasons I will never
understand, were of the opinion that :c:func:``function()`` is
unattractive and not fun to type.
- We now recommend using sphinx 1.7, but still support back to 1.4.
- Lots of smaller improvements, warning fixes, typo fixes, etc.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl0krAEPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Yg98H/AuLqO9LpOgUjF4LhyjxGPdzJkY9RExSJ7km
gznyreLCZgFaJR+AY6YDsd4Jw6OJlPbu1YM/Qo3C3WrZVFVhgL/s2ebvBgCo50A8
raAFd8jTf4/mGCHnAqRotAPQ3mETJUk315B66lBJ6Oc+YdpRhwXWq8ZW2bJxInFF
3HDvoFgMf0KhLuMHUkkL0u3fxH1iA+KvDu8diPbJYFjOdOWENz/CV8wqdVkXRSEW
DJxIq89h/7d+hIG3d1I7Nw+gibGsAdjSjKv4eRKauZs4Aoxd1Gpl62z0JNk6aT3m
dtq4joLdwScydonXROD/Twn2jsu4xYTrPwVzChomElMowW/ZBBY=
=D0eO
-----END PGP SIGNATURE-----
Merge tag 'docs-5.3' of git://git.lwn.net/linux
Pull Documentation updates from Jonathan Corbet:
"It's been a relatively busy cycle for docs:
- A fair pile of RST conversions, many from Mauro. These create more
than the usual number of simple but annoying merge conflicts with
other trees, unfortunately. He has a lot more of these waiting on
the wings that, I think, will go to you directly later on.
- A new document on how to use merges and rebases in kernel repos,
and one on Spectre vulnerabilities.
- Various improvements to the build system, including automatic
markup of function() references because some people, for reasons I
will never understand, were of the opinion that
:c:func:``function()`` is unattractive and not fun to type.
- We now recommend using sphinx 1.7, but still support back to 1.4.
- Lots of smaller improvements, warning fixes, typo fixes, etc"
* tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits)
docs: automarkup.py: ignore exceptions when seeking for xrefs
docs: Move binderfs to admin-guide
Disable Sphinx SmartyPants in HTML output
doc: RCU callback locks need only _bh, not necessarily _irq
docs: format kernel-parameters -- as code
Doc : doc-guide : Fix a typo
platform: x86: get rid of a non-existent document
Add the RCU docs to the core-api manual
Documentation: RCU: Add TOC tree hooks
Documentation: RCU: Rename txt files to rst
Documentation: RCU: Convert RCU UP systems to reST
Documentation: RCU: Convert RCU linked list to reST
Documentation: RCU: Convert RCU basic concepts to reST
docs: filesystems: Remove uneeded .rst extension on toctables
scripts/sphinx-pre-install: fix out-of-tree build
docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/
Documentation: PGP: update for newer HW devices
Documentation: Add section about CPU vulnerabilities for Spectre
Documentation: platform: Delete x86-laptop-drivers.txt
docs: Note that :c:func: should no longer be used
...
This is a very big update, mainly thanks to Morimoto-san's refactoring
work and some fairly large new drivers.
- Lots more work on moving towards a component based framework from
Morimoto-san.
- Support for force disconnecting muxes from Jerome Brunet.
- New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant
CX2072X, Realtek RT1011 and RT1308.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl0jGwUTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0LD4B/9AkutfS+vznOrk0V0wFb2SUfjwE4Pr
+z/kAehohAOl/7pg9Dun/lmZYBWMyOM2aYmK81ahEo2DfO+uzwkwjCaXFjGVGwEK
j7XpWkrIjKnou/z1FeALgVvt+crzdy5iNWC04AbKaP2WHCcI7zvPQIsBta/V0OJt
lg+j0J7pagnTMcgV1+qJdaASmofy/hpoZ79Gv0PIfGC8hpJ/3mBgcNPCLQrJtD4R
v+tzvCZNrZVqCanwLf3vouEm1bpWYOpI+Wdmu4u6rY7MhmCj72EJ2zyfdm/qtaxF
e7whgCyOQFkWe7NgDn0G08aAT6LsaxOtPNr7H8tL8S8sw8425fqeOouV
=n/HQ
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.3
This is a very big update, mainly thanks to Morimoto-san's refactoring
work and some fairly large new drivers.
- Lots more work on moving towards a component based framework from
Morimoto-san.
- Support for force disconnecting muxes from Jerome Brunet.
- New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant
CX2072X, Realtek RT1011 and RT1308.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Implement runtime idle for CNL/APL devices using similar runtime
PM idle logic as the Intel AZX HDA driver. If any HDA codecs are
powered when runtime suspend request comes, return -EBUSY. By doing
this, strict ordering is enforced between HDA codec and the HDA
controller.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20190702132428.13129-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add ability to implement a SOF device level runtime idle callback.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20190702132428.13129-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'string' is malloced in sof_dfsentry_write() and should be freed
before leaving from the error handling cases, otherwise it will cause
memory leak.
Fixes: 091c12e1f5 ("ASoC: SOF: debug: add new debugfs entries for IPC flood test")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20190705081637.157169-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This back-merge is necessary for adjusting the latest FireWire fix
with the recent refactoring in 5.3 development branch.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Compile-testing without PCI just causes warnings:
sound/soc/sof/sof-pci-dev.c:330:13: error: 'sof_pci_remove' defined but not used [-Werror=unused-function]
static void sof_pci_remove(struct pci_dev *pci)
^~~~~~~~~~~~~~
sound/soc/sof/sof-pci-dev.c:230:12: error: 'sof_pci_probe' defined but not used [-Werror=unused-function]
static int sof_pci_probe(struct pci_dev *pci,
^~~~~~~~~~~~~
I tried to fix this in a way that would still allow compile
tests, but it got too ugly, so this just reverts the patch
that allowed it in the first place.
Most architectures do allow enabling PCI, so the value of the
COMPILE_TEST alternative was not very high to start with.
Fixes: e13ef82a9a ("ASoC: SOF: add COMPILE_TEST for PCI options")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Before clearing stream statuses, ensure RUN bit update has taken
effect by reading the value back.
Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
As per the HW recommendation, after setting the RUN bit
(start as 1, stop as 0), software must read the bit back
to make sure the bit is set right, before modifying related
control registers/re-starting the DMA engine.
Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Stream status and WAKESTS registers need to be cleared by writing
to them with snd_sof_dsp_write(). snd_sof_dsp_update_bits() only
writes if the value is changed and will result in not clearing
the status.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Unify suspend code by using SOF common function
hda_dsp_ctrl_stop_chip() which can handle both HDA
and non-HDA cases.
Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add common hda_dsp_ctrl_stop_chip() function to stop controller with
the same function handling both HDA and non-HDA cases. This function
disables IRQs and clears status masks. When CONFIG_SND_SOC_SOF_HDA
is defined, also disables the CORB/RIRB, and stops i/o.
Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Unify ppcap function setup by using SOF common functions
for both HDA and non-HDA cases.
Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
We should use irq disabled mode when read/write hda registers from
thread context, as we need to hold the same bus->reg_lock in interrupt
context hda_dsp_stream_interrupt(), otherwise, when we are holding the
lock in hda_dsp_stream_hw_free() and the interrupt arrives, we will get
deadlock in the interrupt handler.
Error logs like this:
[ 5.603606] CPU0
[ 5.603606] ----
[ 5.603607] lock(&(&bus->reg_lock)->rlock);
[ 5.603608] <Interrupt>
[ 5.603609] lock(&(&bus->reg_lock)->rlock);
[ 5.603610]
*** DEADLOCK ***
[ 5.603611] 2 locks held by pulseaudio/2329:
[ 5.603612] #0: 000000005fcf26c6 (&card->mutex/1){+.+.}, at: dpcm_fe_dai_hw_free+0x2b/0x110 [snd_soc_core]
[ 5.603619] #1: 00000000ef369faf (&rtd->pcm_mutex){+.+.}, at: soc_pcm_hw_free+0x2e/0x1c0 [snd_soc_core]
The fix is simple, let's switch to use spin_lock/unlock_irq().
Reported-by: Xun Zhang <xun2.zhang@intel.com>
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Modify the stream interrupt handler to always wake up the
IRQ thread if the status register is valid. The IRQ thread
performs the check for stream interrupts and RIRB interrupts
in a loop to handle the case of missed interrupts when an
unsolicited response from the codec is received just before the
stream interrupt handler is completed.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Host and link DMA are decoupled during FE hw_params. So,
they must be coupled in hw_free if the link DMA channel
is idle.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Paused streams do not get suspended when the system enters S3.
So, clear and release link DMA channel for such streams in the
hda_dsp_set_hw_params_upon_resume() callback. Also, invalidate
the link DMA channel in the DAI config before restoring the
dai config upon resume. Also, modify the signature for the
set_hw_params_upon_resume() op to return an int.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Due to the HW programming sequence requirement that the host
and link DMA channels need to be coupled/decoupled during pcm
hw_params, the host DMA channel corresponding to the link
DMA channel in use for hostless streams needs to be reserved.
This is achieved by adding a host_reserved flag in the
sof_intel_hda_stream structure which is checked when assigning
a host DMA channel.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The recommended HDA HW programming sequence for setting
the DMA format requires that the link DMA and host DMA
channels be coupled before setting the format. This
change means that host DMA or link DMA channels be
reserved even if only one is used.
Statically assigned link DMA channels would mean that
all the corresponding host DMA channels will need to be
reserved, leaving only a few channels available at run-time.
So, the suggestion here is to switch to dynamically assigning
both host DMA channels and link DMA channels are run-time.
The host DMA channel is assigned when the pcm
is opened as before. While choosing the link DMA channel,
if the host DMA channel corresponding to the link DMA channel
is already taken, the proposed method checks to make
sure that the BE is connected to the FE that has been assigned
this host DMA channel. Once the link DMA channel is assigned,
an IPC is sent to the DSP to set the link DMA channel.
The link DMA channel is freed during hw_free() and also in the
SUSPEND trigger callback. It will be re-assigned when hw_params
are set upon resume.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the cpu_dai_name member to snd_sof_dai and save the
cpu_dai_name while setting the DAI config.
The internal SOF representation will have to change at a later point
as well when we have multiple CPU dais.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new macro to get sof_intel_hda_stream from hdac_ext_stream.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a snd_sof_dev member to sof_intel_hda_stream. This will be
used to access the snd_sof_dev during link hw_params callback.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The conversion here is really trivial: just a bunch of title
markups and very few puntual changes is enough to make it to
be parsed by Sphinx and generate a nice html.
The conversion is actually:
- add blank lines and identation in order to identify paragraphs;
- fix tables markups;
- add some lists markups;
- mark literal blocks;
- adjust title markups.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
you might feel like a deja vu to receive a bulk of changes at rc5,
and it happens again; we've got a collection of fixes for ASoC.
Most of fixes are targeted for the newly merged SOF (Sound Open
Firmware) stuff and the relevant fixes for Intel platforms.
Other than that, there are a few regression fixes for the recent
ASoC core changes and HD-audio quirk, as well as a couple of
FireWire fixes and for other ASoC codecs.
-----BEGIN PGP SIGNATURE-----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=9U0L
-----END PGP SIGNATURE-----
Merge tag 'sound-5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"It might feel like deja vu to receive a bulk of changes at rc5, and it
happens again; we've got a collection of fixes for ASoC. Most of fixes
are targeted for the newly merged SOF (Sound Open Firmware) stuff and
the relevant fixes for Intel platforms.
Other than that, there are a few regression fixes for the recent ASoC
core changes and HD-audio quirk, as well as a couple of FireWire fixes
and for other ASoC codecs"
* tag 'sound-5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (54 commits)
Revert "ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops"
ALSA: ice1712: Check correct return value to snd_i2c_sendbytes (EWS/DMX 6Fire)
ALSA: oxfw: allow PCM capture for Stanton SCS.1m
ALSA: firewire-motu: fix destruction of data for isochronous resources
ASoC: Intel: sst: fix kmalloc call with wrong flags
ASoC: core: Fix deadlock in snd_soc_instantiate_card()
SoC: rt274: Fix internal jack assignment in set_jack callback
ALSA: hdac: fix memory release for SST and SOF drivers
ASoC: SOF: Intel: hda: use the defined ppcap functions
ASoC: core: move DAI pre-links initiation to snd_soc_instantiate_card
ASoC: Intel: cht_bsw_rt5672: fix kernel oops with platform_name override
ASoC: Intel: cht_bsw_nau8824: fix kernel oops with platform_name override
ASoC: Intel: bytcht_es8316: fix kernel oops with platform_name override
ASoC: Intel: cht_bsw_max98090: fix kernel oops with platform_name override
ASoC: sun4i-i2s: Add offset to RX channel select
ASoC: sun4i-i2s: Fix sun8i tx channel offset mask
ASoC: max98090: remove 24-bit format support if RJ is 0
ASoC: da7219: Fix build error without CONFIG_I2C
ASoC: SOF: Intel: hda: Fix COMPILE_TEST build error
ASoC: SOF: fix DSP oops definitions in FW ABI
...
Always get kcontrol value from cache, set kcontrol value to DSP
when DSP is active. Kcontrol values will be restored when DSP boot up.
We will set the default value of kcontrol in sof_complete to make sure
the value is align with firmware.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The settling time of DMIC DC level is both platform and used
microphone model specific. The unmute gain ramp is used to conceal
most of the large DC level seen in beginning of capture. This patch
adds into the DMIC DAI IPC struct a new field called unmute_ramp_time
and a new token SOF_TKN_INTEL_DMIC_UNMUTE_RAMP_TIME. The value is the
ramp length in milliseconds (ms).
The ABI minor version is incremented for this backwards compatible
change.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver currently passes the volume ramp type and length
topology tokens to firmware, but the min and max volume are
not set. This patch provides a correction to convert the
information from the topology file and pass the linear volume
min/max value to the firmware to improve transitions.
Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
add two units min_volume_step and max_volume_step to the snd_sof_control
struct, for the min and max step of the volume_table.
Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cppcheck complains about the following warning, fix by adding
parentheses
[sound/soc/sof/ipc.c:783]:
(style) Clarify calculation precedence for '&' and '?'.
[sound/soc/sof/ipc.c:785]:
(style) Clarify calculation precedence for '&' and '?'.
[sound/soc/sof/ipc.c:787]:
(style) Clarify calculation precedence for '&' and '?'.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the suspend flow, a context save IPC message is
sent to the firmware before powering down the DSP. If errors
are met, the suspend flow is aborted with current code.
Change the behaviour such that if firmware returns -EBUSY or
-EAGAIN, return the error codes to PM core as before. The device
is left in active state in this case.
If other errors are reported, print a warning but do not block the
suspend flow. As per interface specification, no valid error can be
returned in this scenario. If the hardware has hit a fatal error and
is not able to respond successfully, best recovery method is to
proceed with suspend and power off the DSP.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Extend the HDA IPC dump implementation with status of key IRQ
registers. This is useful to debug IPC timeouts and similar
issues.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
If the firmware is set for verbose tracing, the kernel log is flooded
with ipc rx/ipc rx done messages. Prevent logging those unless the
verbose IPC debugging config option is set.
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now supporting modern style dai_link
(= snd_soc_dai_link_component) for CPU/Codec/Platform.
This patch switches to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There are already defined ppcap and ppcap interrupt functions, use
the already defined functions for easy code read.
Fixes: 8a300c8fb1 ("ASoC: SOF: Intel: Add HDA controller for Intel DSP")
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
while building without PCI:
sound/soc/sof/intel/hda.o: In function `hda_dsp_probe':
hda.c:(.text+0x79c): undefined reference to `pci_ioremap_bar'
hda.c:(.text+0x79c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `pci_ioremap_bar'
hda.c:(.text+0x7c4): undefined reference to `pci_ioremap_bar'
hda.c:(.text+0x7c4): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `pci_ioremap_bar'
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: e13ef82a9a ("ASoC: SOF: add COMPILE_TEST for PCI options")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a couple of new debugfs entries "ipc_flood_count"
and "ipc_flood_duration_ms" that can be used to
execute the IPC flood test. "ipc_flood_count" floods the DSP
with the number of test IPCs specified and ipc_flood_duration_ms
floods the DSP with test IPC's for the duration(in ms) specified.
The test stats such as average, min and max IPC response times
are logged in the dmesg and saved in the debugfs entry cache buffer.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new class of IPC command along with the first
test type, IPC_FLOOD, which will be used for flooding the DSP
with IPCs.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Timer will be reset when DSP is powered down. So the time stamp of trace
log will be reset after resume. Send time stamp to FW can align the time
stamp and avoid reset time stamp in trace log.
Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add enumerations to support mux/demux processing component.
Signed-off-by: Jaska Uimonen <jaska.uimonen@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The definitions for DSP oops structures were not aligned
correctly to current FW ABI version 3.6.0, leading to
invalid data being printed out to debug logs. Fix the structs
and update related platform code accordingly.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The HIPCCTL register controls the IPC interrupts. It can be set or
cleared to mask or enable these interrupts, but it makes no sense to
read and test its fields in an interrupt (which can only executed if
its fields are set).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Align with Skylake driver and enable the IRQ at end of handler,
instead of at beginning.
Also add an error log if we have nothing to do in this handler.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Align with hardware recommended sequences, and read all IPC registers
before doing any other actions. Playing with BUSY and DONE bits may
invalidate values.
The values read may not actually be necessary but at least this
provides a snapshot of the IPC registers with no consistency issues.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Align with Skylake driver and enable the IRQ at end of handler,
instead of at beginning.
Also add an error log if we have nothing to do in this handler.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Move all register access to cnl_ipc_host_done()
No functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Align with hardware recommended sequences, and read all IPC registers
before doing any other actions. Playing with BUSY and DONE bits may
invalidate values.
The values read may not actually be necessary but at least this
provides a snapshot of the IPC registers with no consistency issues.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
We use shim registers only to notify the other
side that a message was sent. The actual information
for the message is transmitted via mailbox.
cmd information inside shim register is not used by
the DSP, so we remove it to avoid confusion.
Signed-off-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add mode parameter for snd_sof_debugfs_buf_item() to specify
the mode while creating debugfs entries.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Previously the structure used bitfields, which do not guarantee bit
ordering.
This change makes sure the order is clearly defined. It also renames
and repurposes the field for general use.
Signed-off-by: Slawomir Blauciak <slawomir.blauciak@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There are already defined ppcap and ppcap interrupt functions, use
the already defined functions for easy code read.
Fixes: 8a300c8fb1 ("ASoC: SOF: Intel: Add HDA controller for Intel DSP")
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add COMPILE_TEST and use IS_ENABLED(CONFIG_PCI) to sort out
cross-compilation issues.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
We have duplicated code in multiple locations (atom, machine drivers,
SOF) to detect Baytrail, Cherrytrail and other SOCs. This is not very
elegant, and introduces dependencies on CONFIG_X86 that prevent
COMPILE_TEST from working.
Add common helpers to provide same functionality in a cleaner
way. This will also help support the DMI-based quirks being introduced
to handle SOF/SST autodetection.
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current trace implementation gets out of sync when sof device
is put to suspend. The debugfs file handle is kept open, but
firmware will reset its state. After resume, debugfs client's
read offset will not be synchronized to firmware and this may
result in traces read in incorrect order and/or stale data being
read after resume.
Add logic to signal end-of-file to read() when firmware tracing
has ended, and all trace data has been read. This allows debugfs
client to capture all trace data, and reopen the trace file to
ensure proper synchronization with firmware after reopening
the node.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Move duplicated code in sof_wait_trace_avail() to a helper function.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes, in particular in the
context in which this code is being used.
So, replace code of the following form:
sizeof(*w) + sizeof(struct sof_ipc_window_elem) * w->num_windows
with:
struct_size(w, window, w->num_windows)
Notice that variable size is unnecessary, hence it is removed.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes, in particular in the
context in which this code is being used.
So, replace the following form:
sizeof(struct sof_ipc_ctrl_data) + sizeof(struct sof_ipc_ctrl_value_chan) *
le32_to_cpu(mc->num_channels)
with:
struct_size(scontrol->control_data, chanv, le32_to_cpu(mc->num_channels))
and so on...
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
re-write hda_init_caps and remove the HDA reset, clean HDA
streams and clear interrupt steps in hda_dsp_probe so the
HDA init steps will not be called twice if the
CONFIG_SND_SOC_SOF_HDA is true.
Fixes: 8a300c8fb1 ("ASoC: SOF: Intel: Add HDA controller for Intel DSP")
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently on all supported platforms the IPC IRQ thread first signals
the sender when an IPC response is received from the DSP, then unmasks
the IPC interrupt. Those actions are performed without holding any
locks, so the thread can be interrupted between them. IPC timeouts
have been observed in such scenarios: if the sender is woken up and it
proceeds with sending the next message without unmasking the IPC
interrupt, it can miss the next response. This patch takes a spin-lock
to prevent the IRQ thread from being preempted at that point. It also
makes sure, that the next IPC transmission by the host cannot take
place before the IRQ thread has finished updating all the required IPC
registers.
Fixes: 53e0c72d98 ("ASoC: SOF: Add support for IPC IO between DSP and Host")
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The size for the bytes kcontrol should include the abi header, that is,
data->size + sizeof(*data), it is also aligned with get method after
this change.
Fixes: c3078f5397 ("ASoC: SOF: Add Sound Open Firmware KControl support")
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
If the SOF hw_params() fail, typically with an IPC error thrown by the
firmware, the period_elapsed workqueue is not initialized, but we
still cancel it in hw_free(), which results in a kernel warning.
Move the initialization to the .open callback. Tested on Broadwell
(Samus) and IceLake.
Fixes: e2803e610a ("ASoC: SOF: PCM: add period_elapsed work to fix
race condition in interrupt context")
GitHub issue: https://github.com/thesofproject/linux/issues/932
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_pcm_hw_params() can only be called once to setup the FW hw_params.
So after calling sof_pcm_hw_params(), hw_params_upon_resume flag must
be cleared to avoid multiple invoking sof_pcm_hw_params() by prepare.
For example, after resume, there is an xrun happened, prepare() will
be called. As the hw_params_upon_resume flag is not cleared,
sof_pcm_hw_params() will be called and this will cause IPC timeout.
This patch fixes such issues.
Fixes: 868bd00f49 ("ASoC: SOF: Add PCM operations support")
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In some configurations, it's a requirement to split the probe in two,
with a second part handled in a workqueue (e.g. for HDMI support
which depends on the DRM modules).
SOF already handles these configurations but the error flow is
incorrect. When an error occurs in the workqueue, the probe has
technically already completed. If we release the resources on errors,
this generates kernel oops/use-after-free when the resources are
released a second time on module removal.
GitHub issue: https://github.com/thesofproject/linux/issues/945
Fixes: c16211d622 ("ASoC: SOF: Add Sound Open Firmware driver core")
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
No need to call snd_soc_unregister_component in case of error
because the component device is resource-managed.
Fixes: c16211d622 ("ASoC: SOF: Add Sound Open Firmware driver core")
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_sof_remove() disables the DSP and unmaps the DSP BAR.
Removing topology after disabling the DSP results in a
kernel panic while unloading the pipeline widget. This is
because pipeline widget unload attempts to power down
the core it is scheduled on by accessing the DSP registers.
So, the suggested fix here is to unregister the machine driver
first to remove the topology and then disable the DSP
to avoid the situation described above.
Note that the kernel panic only happens in cases where the
HDaudio link is not managed by the hdac library,
e.g. no codec or when HDMI is not supported.
When the hdac library is used, snd_sof_remove() calls
snd_hdac_ext_bus_device_remove() to remove the codec which
unregisters the component driver thereby also removing the
topology before the DSP is disabled.
Fixes: c16211d622 ("ASoC: SOF: Add Sound Open Firmware driver core")
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a workaround in legacy HDA codec for too long time respone
with CFL machine. We need the same workaround on SOF driver. The same
issue is also seen on CNL machine.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Icelake has different count of SSP other than CNL, using
the new defined ICL SSP count, and copy other parameters
from CNL chip info.
Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
On Icelake we have 6 SSP ports, add ICL SSP count to
enable all SSPs, instead of using the SSP count defined
for CNL.
Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
pm_runtime_get_sync()/pm_runtime_put_autosuspend() calls are
already invoked by the ASoC core in soc_pcm_open() and
soc_pcm_close(). So the SOF component driver does not need
to call them again.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for Intel Comet Lake platforms by adding a new Kconfig
for CometLake and the appropriate PCI IDs.
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the erroneous addition of "SET_VALUE" to the GLB
IPC command string.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
A race condition exists in handling firmware boot timeout.
If FW sends FW_READY just after boot timeout has expired in
driver, a kernel exception will result as FW_READY handler
will be run while the state is still being cleaned up in
snd_sof_run_firmware(). Avoid the race by setting
boot_complete also in the error case.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The nocodec option can be selected individually, leading to the following
issue:
sound/soc/sof/core.o: In function `snd_sof_device_probe':
core.c:(.text+0x4af): undefined reference to `sof_nocodec_setup'
Fix by selecting the SND_SOF_NOCODEC option as needed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Reported-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The recent fix for the build fix caused a couple of unused variable
compiler warnings when CONFIG_SND_SOC_SOF_NOCODEC isn't set:
sound/soc/sof/core.c:263:6: warning: unused variable ‘ret’ [-Wunused-variable]
sound/soc/sof/core.c:262:28: warning: unused variable ‘machine’ [-Wunused-variable]
Fix them by adding another ifdef.
Fixes: ce38a75089 ("ASoC: SOF: core: fix undefined nocodec reference")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code mistakenly uses IS_ENABLED in C code instead of as
in conditional compilation, leading to the following error:
ld: sound/soc/sof/core.o: in function `sof_machine_check':
sound/soc/sof/core.c:279: undefined reference to `sof_nocodec_setup'
Fix by using #if !IS_ENABLED()
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The SND_SOC_INTEL_COMMON Kconfig was removed months ago from SOF
Kconfig files but is still selected instead of the correct
SND_SOC_SOF_INTEL_COMMON kconfig which does select xtensa stuff,
leading to the following errors.
ld: sound/soc/sof/sof-acpi-dev.o:(.rodata+0x120): undefined reference
to `sof_xtensa_arch_ops'
ld: sound/soc/sof/sof-acpi-dev.o:(.rodata+0x180): undefined reference
to `sof_xtensa_arch_ops'
ld: sound/soc/sof/sof-acpi-dev.o:(.rodata+0x1e0): undefined reference
to `sof_xtensa_arch_ops'
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This fixes a compile warning below by properly handling the error code
from sof_get_ctrl_copy_params():
include/linux/kernel.h:843:43: warning: 'sparams.pl_size' may be used uninitialized in this function [-Wmaybe-uninitialized]
sound/soc/sof/ipc.c:639:34: note: 'sparams.pl_size' was declared here
The function returns an error before setting sparams.pl_size, so it'd
assign an uninitialized value at a later point.
Fixes: 53e0c72d98 ("ASoC: SOF: Add support for IPC IO between DSP and Host")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
A trivial fix for the randconfig build error:
sound/soc/sof/ops.c:20:6: warning: ‘ret’ is used uninitialized in this function [-Wuninitialized]
Fixes: d1d95fcb63 ("ASoC: SOF: Add DSP HW abstraction operations")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix kconfig warning for unmet dependency for IOSF_MBI when
PCI is not set/enabled. Fixes this warning:
WARNING: unmet direct dependencies detected for IOSF_MBI
Depends on [n]: PCI [=n]
Selected by [y]:
- SND_SOC_SOF_ACPI [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_SOF_TOPLEVEL [=y] && (ACPI [=y] || COMPILE_TEST [=n]) && X86 [=y]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add ipc dump function to CNL+ platforms.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add IPC dump function for APL plaform
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Dump IPC status when IPC timed out. IPC status is platform specific and
need bind to plaform.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The prepare() ioctl for BE dai link gets called both
when the stream is started and when it is resumed from
suspend. SOF uses this ioctl to set the hw params
again only if the stream has been suspended.
When the stream is started, the hw_params ioctl gets called
before prepare() and hw_params is set for the BE dai link.
So the prepare call does not need to do anything further.
When the stream resumes after system suspend, SOF requires
that the hw_params be set again for the BE dai. In order
to determine which streams should set the hw params
during prepare(), an internal flag called "hw_params_upon_resume"
is introduced in struct sof_intel_hda_stream. The flag is set
for hda streams when the sof device suspends and is
cleared after hw_params is set.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The stream and IPC share the same interrupt. The stream interrupt
handler mistakenly uses the ipc interrupt and return IRQ_HANDLED,
causing the ipc interrupt to be missed.
Make sure the stream interrupt handler only deals with stream-related
interrupts.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add stream_max into struct sof_intel_hda_dev to store the total hda
stream number that the platform can support, and initialize it at
stream_init.
This can be used later e.g. for stream bitmask.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When using a shared IRQ between IPC interrupt and stream IOC interrupt,
the interrupt handlers need to check the interrupt source before
scheduling their respective IRQ threads. In the case of IPC handler, it
should check if it is an IPC interrupt before waking up the IPC IRQ
thread.
The IPC IRQ thread, once scheduled, does not need to check the IRQ
source again. So, remove the superfluous check in the thread. Remove the
irq_status field from snd_sof_dev struct also as it is no longer needed.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kai Vehmanen