Pull perf changes from Ingo Molnar:
"There are lots of improvements, the biggest changes are:
Main kernel side changes:
- Improve uprobes performance by adding 'pre-filtering' support, by
Oleg Nesterov.
- Make some POWER7 events available in sysfs, equivalent to what was
done on x86, from Sukadev Bhattiprolu.
- tracing updates by Steve Rostedt - mostly misc fixes and smaller
improvements.
- Use perf/event tracing to report PCI Express advanced errors, by
Tony Luck.
- Enable northbridge performance counters on AMD family 15h, by Jacob
Shin.
- This tracing commit:
tracing: Remove the extra 4 bytes of padding in events
changes the ABI. All involved parties (PowerTop in particular)
seem to agree that it's safe to do now with the introduction of
libtraceevent, but the devil is in the details ...
Main tooling side changes:
- Add 'event group view', from Namyung Kim:
To use it, 'perf record' should group events when recording. And
then perf report parses the saved group relation from file header
and prints them together if --group option is provided. You can
use the 'perf evlist' command to see event group information:
$ perf record -e '{ref-cycles,cycles}' noploop 1
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.385 MB perf.data (~16807 samples) ]
$ perf evlist --group
{ref-cycles,cycles}
With this example, default perf report will show you each event
separately.
You can use --group option to enable event group view:
$ perf report --group
...
# group: {ref-cycles,cycles}
# ========
# Samples: 7K of event 'anon group { ref-cycles, cycles }'
# Event count (approx.): 6876107743
#
# Overhead Command Shared Object Symbol
# ................ ....... ................. ..........................
99.84% 99.76% noploop noploop [.] main
0.07% 0.00% noploop ld-2.15.so [.] strcmp
0.03% 0.00% noploop [kernel.kallsyms] [k] timerqueue_del
0.03% 0.03% noploop [kernel.kallsyms] [k] sched_clock_cpu
0.02% 0.00% noploop [kernel.kallsyms] [k] account_user_time
0.01% 0.00% noploop [kernel.kallsyms] [k] __alloc_pages_nodemask
0.00% 0.00% noploop [kernel.kallsyms] [k] native_write_msr_safe
0.00% 0.11% noploop [kernel.kallsyms] [k] _raw_spin_lock
0.00% 0.06% noploop [kernel.kallsyms] [k] find_get_page
0.00% 0.02% noploop [kernel.kallsyms] [k] rcu_check_callbacks
0.00% 0.02% noploop [kernel.kallsyms] [k] __current_kernel_time
As you can see the Overhead column now contains both of ref-cycles
and cycles and header line shows group information also - 'anon
group { ref-cycles, cycles }'. The output is sorted by period of
group leader first.
- Initial GTK+ annotate browser, from Namhyung Kim.
- Add option for runtime switching perf data file in perf report,
just press 's' and a menu with the valid files found in the current
directory will be presented, from Feng Tang.
- Add support to display whole group data for raw columns, from Jiri
Olsa.
- Add per processor socket count aggregation in perf stat, from
Stephane Eranian.
- Add interval printing in 'perf stat', from Stephane Eranian.
- 'perf test' improvements
- Add support for wildcards in tracepoint system name, from Jiri
Olsa.
- Add anonymous huge page recognition, from Joshua Zhu.
- perf build-id cache now can show DSOs present in a perf.data file
that are not in the cache, to integrate with build-id servers being
put in place by organizations such as Fedora.
- perf top now shares more of the evsel config/creation routines with
'record', paving the way for further integration like 'top'
snapshots, etc.
- perf top now supports DWARF callchains.
- Fix mmap limitations on 32-bit, fix from David Miller.
- 'perf bench numa mem' NUMA performance measurement suite
- ... and lots of fixes, performance improvements, cleanups and other
improvements I failed to list - see the shortlog and git log for
details."
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (270 commits)
perf/x86/amd: Enable northbridge performance counters on AMD family 15h
perf/hwbp: Fix cleanup in case of kzalloc failure
perf tools: Fix build with bison 2.3 and older.
perf tools: Limit unwind support to x86 archs
perf annotate: Make it to be able to skip unannotatable symbols
perf gtk/annotate: Fail early if it can't annotate
perf gtk/annotate: Show source lines with gray color
perf gtk/annotate: Support multiple event annotation
perf ui/gtk: Implement basic GTK2 annotation browser
perf annotate: Fix warning message on a missing vmlinux
perf buildid-cache: Add --update option
uprobes/perf: Avoid uprobe_apply() whenever possible
uprobes/perf: Teach trace_uprobe/perf code to use UPROBE_HANDLER_REMOVE
uprobes/perf: Teach trace_uprobe/perf code to pre-filter
uprobes/perf: Teach trace_uprobe/perf code to track the active perf_event's
uprobes: Introduce uprobe_apply()
perf: Introduce hw_perf_event->tp_target and ->tp_list
uprobes/perf: Always increment trace_uprobe->nhit
uprobes/tracing: Kill uprobe_trace_consumer, embed uprobe_consumer into trace_uprobe
uprobes/tracing: Introduce is_trace_uprobe_enabled()
...
The bit width check was introduced by 15afae60 (ACPI, APEI: Fix
incorrect APEI register bit width check and usage), and a fixup
for incorrect 32-bit width memory address was given by f712c71
(ACPI, APEI: Fixup common access width firmware bug). Now there
is a similar symptom:
[Firmware Bug]: APEI: Invalid bit width + offset in GAR [0x12345000/64/0/3/0]
Another bogus BIOS reports an incorrect 64-bit width in trigger table.
Thus, apply to a similar workaround for 64-bit width memory address.
Signed-off-by: Lans Zhang <jia.zhang@windriver.com>
Acked-by: Gary Hade <garyhade@us.ibm.com>
Acked-by: Myron Stowe <myron.stowe@redhat.com>
Acked-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch will provide a more reliable and easy way for user-space
applications to have access to AER logs rather than reading them from the
message buffer. It also provides a way to notify user-space when an AER
event occurs.
The aer driver is updated to generate a trace event of function 'aer_event'
when a PCIe error is reported over the AER interface. The trace event was
added to both the interrupt based aer path and the firmware first path.
Signed-off-by: Lance Ortiz <lance.ortiz@hp.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Boris Petkov <bp@alien8.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
If the persistent store is empty initially, the function 'erst_dbg_read'
returns a nonzero value. The better way is to return a zero indicating the
read operation reaches EOF.
Tested on two different servers.
Signed-off-by: Adrian Huang <adrian.huang@hp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
to hold multiple records.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=NAdA
-----END PGP SIGNATURE-----
Merge tag 'please-pull-pstore_mevent' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux
Pull pstore fixes from Tony Luck:
"Patch series to allow EFI variable backend to pstore to hold multiple
records."
* tag 'please-pull-pstore_mevent' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
efi_pstore: Add a format check for an existing variable name at erasing time
efi_pstore: Add a format check for an existing variable name at reading time
efi_pstore: Add a sequence counter to a variable name
efi_pstore: Add ctime to argument of erase callback
efi_pstore: Remove a logic erasing entries from a write callback to hold multiple logs
efi_pstore: Add a logic erasing entries to an erase callback
efi_pstore: Check remaining space with QueryVariableInfo() before writing data
Here's the large driver core updates for 3.8-rc1.
The biggest thing here is the various __dev* marking removals. This is
going to be a pain for the merge with different subsystem trees, I know,
but all of the patches included here have been ACKed by their various
subsystem maintainers, as they wanted them to go through here.
If this is too much of a pain, I can pull all of them out of this tree
and just send you one with the other fixes/updates and then, after
3.8-rc1 is out, do the rest of the removals to ensure we catch them all,
it's up to you. The merges should all be trivial, and Stephen has been
doing them all in linux-next for a few weeks now quite easily.
Other than the __dev* marking removals, there's nothing major here, some
firmware loading updates and other minor things in the driver core.
All of these have (much to Stephen's annoyance), been in linux-next for
a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlDHkPkACgkQMUfUDdst+ykaWgCfW7AM30cv0nzoVO08ax6KjlG1
KVYAn3z/KYazvp4B6LMvrW9y0G34Wmad
=yvVr
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg Kroah-Hartman:
"Here's the large driver core updates for 3.8-rc1.
The biggest thing here is the various __dev* marking removals. This
is going to be a pain for the merge with different subsystem trees, I
know, but all of the patches included here have been ACKed by their
various subsystem maintainers, as they wanted them to go through here.
If this is too much of a pain, I can pull all of them out of this tree
and just send you one with the other fixes/updates and then, after
3.8-rc1 is out, do the rest of the removals to ensure we catch them
all, it's up to you. The merges should all be trivial, and Stephen
has been doing them all in linux-next for a few weeks now quite
easily.
Other than the __dev* marking removals, there's nothing major here,
some firmware loading updates and other minor things in the driver
core.
All of these have (much to Stephen's annoyance), been in linux-next
for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
Fixed up trivial conflicts in drivers/gpio/gpio-{em,stmpe}.c due to gpio
update.
* tag 'driver-core-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (93 commits)
modpost.c: Stop checking __dev* section mismatches
init.h: Remove __dev* sections from the kernel
acpi: remove use of __devinit
PCI: Remove __dev* markings
PCI: Always build setup-bus when PCI is enabled
PCI: Move pci_uevent into pci-driver.c
PCI: Remove CONFIG_HOTPLUG ifdefs
unicore32/PCI: Remove CONFIG_HOTPLUG ifdefs
sh/PCI: Remove CONFIG_HOTPLUG ifdefs
powerpc/PCI: Remove CONFIG_HOTPLUG ifdefs
mips/PCI: Remove CONFIG_HOTPLUG ifdefs
microblaze/PCI: Remove CONFIG_HOTPLUG ifdefs
dma: remove use of __devinit
dma: remove use of __devexit_p
firewire: remove use of __devinitdata
firewire: remove use of __devinit
leds: remove use of __devexit
leds: remove use of __devinit
leds: remove use of __devexit_p
mmc: remove use of __devexit
...
To handle error trigger table correctly, memory region must be
removed from request region. We had a series of patches to do this
culminating in:
commit b4e008dc5
ACPI, APEI, EINJ, Refine the fix of resource conflict
but when ACPI5 support was added, we missed updating this area. So
when using EINJ table on an ACPI5 enabled machine, we get following error:
APEI: Can not request [mem 0x526b80000-0x526b80007] for APEI EINJ
Trigger registers
Fix this by checking for the acpi5 case and using the same code
that was added earlier.
Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[Issue]
Currently, a variable name, which identifies each entry, consists of type, id and ctime.
But if multiple events happens in a short time, a second/third event may fail to log because
efi_pstore can't distinguish each event with current variable name.
[Solution]
A reasonable way to identify all events precisely is introducing a sequence counter to
the variable name.
The sequence counter has already supported in a pstore layer with "oopscount".
So, this patch adds it to a variable name.
Also, it is passed to read/erase callbacks of platform drivers in accordance with
the modification of the variable name.
<before applying this patch>
a variable name of first event: dump-type0-1-12345678
a variable name of second event: dump-type0-1-12345678
type:0
id:1
ctime:12345678
If multiple events happen in a short time, efi_pstore can't distinguish them because
variable names are same among them.
<after applying this patch>
it can be distinguishable by adding a sequence counter as follows.
a variable name of first event: dump-type0-1-1-12345678
a variable name of Second event: dump-type0-1-2-12345678
type:0
id:1
sequence counter: 1(first event), 2(second event)
ctime:12345678
In case of a write callback executed in pstore_console_write(), "0" is added to
an argument of the write callback because it just logs all kernel messages and
doesn't need to care about multiple events.
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mike Waychison <mikew@google.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
[Issue]
Currently, a variable name, which is used to identify each log entry, consists of type,
id and ctime. But an erase callback does not use ctime.
If efi_pstore supported just one log, type and id were enough.
However, in case of supporting multiple logs, it doesn't work because
it can't distinguish each entry without ctime at erasing time.
<Example>
As you can see below, efi_pstore can't differentiate first event from second one without ctime.
a variable name of first event: dump-type0-1-12345678
a variable name of second event: dump-type0-1-23456789
type:0
id:1
ctime:12345678, 23456789
[Solution]
This patch adds ctime to an argument of an erase callback.
It works across reboots because ctime of pstore means the date that the record was originally stored.
To do this, efi_pstore saves the ctime to variable name at writing time and passes it to pstore
at reading time.
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Acked-by: Mike Waychison <mikew@google.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Many firmwares have a common register definition bug where 8-bit
access width is specified for a 32-bit register. Ideally this should
be fixed in the BIOS, but earlier versions of the kernel did not
complain, so fix that up silently.
This closes kernel bug #43282:
https://bugzilla.kernel.org/show_bug.cgi?id=43282
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Huang Ying <ying.huang@intel.com>
Acked-by: Gary Hade <garyhade@us.ibm.com>
Cc: stable@vger.kernel.org [3.4+]
Signed-off-by: Len Brown <len.brown@intel.com>
This patch fixed the following bug.
https://bugzilla.kernel.org/show_bug.cgi?id=43282
This is caused by a firmware bug checking (checking generic address
register provided by firmware) in runtime. The checking should be
done in address mapping time instead of runtime to avoid too much
error reporting in runtime.
Reported-by: Pawel Sikora <pluto@agmk.net>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Tested-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@vger.kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
Conflicts:
drivers/acpi/apei/apei-base.c
This was a conflict between
15afae6046
(CPI, APEI: Fix incorrect APEI register bit width check and usage)
and
653f4b538f
(ACPICA: Expand OSL memory read/write interfaces to 64 bits)
The former changed a parameter in the call to acpi_os_read_memory64()
and the later replaced all calls to acpi_os_read_memory64()
with calls to acpi_os_read_memory().
Signed-off-by: Len Brown <len.brown@intel.com>
The function apei_estatus_print() and apei_estatus_check() forget to move ahead
the gdata pointer when dealing with multiple generic error data sections.
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The current code incorrectly assumes that
(1) the APEI register bit width is always 8, 16, 32, or 64 and
(2) the APEI register bit width is always equal to the APEI
register access width.
ERST serialization instructions entries such as:
[030h 0048 1] Action : 00 [Begin Write Operation]
[031h 0049 1] Instruction : 03 [Write Register Value]
[032h 0050 1] Flags (decoded below) : 01
Preserve Register Bits : 1
[033h 0051 1] Reserved : 00
[034h 0052 12] Register Region : [Generic Address Structure]
[034h 0052 1] Space ID : 00 [SystemMemory]
[035h 0053 1] Bit Width : 03
[036h 0054 1] Bit Offset : 00
[037h 0055 1] Encoded Access Width : 03 [DWord Access:32]
[038h 0056 8] Address : 000000007F2D7038
[040h 0064 8] Value : 0000000000000001
[048h 0072 8] Mask : 0000000000000007
break this assumption by yielding:
[Firmware Bug]: APEI: Invalid bit width in GAR [0x7f2d7038/3/0]
I have found no ACPI specification requirements corresponding
with the above assumptions. There is even a good example in
the Serialization Instruction Entries section (ACPI 4.0 section
17.4,1.2, ACPI 4.0a section 2.5.1.2, ACPI 5.0 section 18.5.1.2)
that mentions a serialization instruction with a bit range of
[6:2] which is 5 bits wide, _not_ 8, 16, 32, or 64 bits wide.
Compile and boot tested with 3.3.0-rc7 on a IBM HX5.
Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Some APEI firmware implementation will access injected address
specified in param1 to trigger the error when injecting memory
error, which means if one SRAR error is injected, the crash
always happens because it is executed in kernel context. This
new parameter can disable trigger action and control is taken
over by the user. In this way, an SRAR error can happen in user
context instead of crashing the system. This function is highly
depended on BIOS implementation so please ensure you know the
BIOS trigger procedure before you enable this switch.
v2:
notrigger should be created together with param1/param2
Tested-by: Tony Luck <tony.luck@lintel.com>
Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
On the platforms with ACPI4.x support, parameter extension
is not always doable, which means only parameter extension
is enabled, einj_param can take effect.
v2->v1: stopping early in einj_get_parameter_address for einj_param
Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
This fixes a trivial copy & paste error in ERST header length check.
It's just for future safety because sizeof(struct acpi_table_einj)
equals to sizeof(struct acpi_table_erst) with current ACPI5.0
specification. It applies to v3.3-rc6.
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Acked-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
This change expands acpi_os_read_memory and acpi_os_write_memory to a
full 64 bits. This allows 64 bit transfers via the acpi_read and
acpi_write interfaces. Note: The internal acpi_hw_read and acpi_hw_write
interfaces remain at 32 bits, because 64 bits is not needed to
access the standard ACPI registers.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
ioremap() has become more picky and is now spitting out console messages like:
ioremap error for 0xbddbd000-0xbddbe000, requested 0x10, got 0x0
when loading the einj driver. What we are trying to so here is map
a couple of data structures that the EINJ table points to. Perhaps
acpi_os_map_memory() is a better tool for this?
Most importantly it works, but as a side benefit it maps the structures
into kernel virtual space so we can access them with normal C memory
dereferences, so instead of using:
writel(param1, &v5param->apicid);
we can use the more natural:
v5param->apicid = param1;
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
This function is returning pointers. Sparse complains here:
drivers/acpi/apei/einj.c:262:32: warning:
Using plain integer as NULL pointer
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
According to the ACPI spec [1] section 18.6.4 the TRIGGER_ERROR action
table can consists of zero elements.
[1] Advanced Configuration and Power Interface Specification
Revision 5.0, December 6, 2011
http://www.acpi.info/DOWNLOADS/ACPIspec50.pdf
Signed-off-by: Niklas Söderlund <niklas.soderlund@ericsson.com>
Acked-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Base ACPI (CA) currently does not support atomic 64-bit reads and writes
(acpi_read() and acpi_write() split 64-bit loads/stores into two
32-bit transfers) yet APEI expects 64-bit transfer capability, even
when running on 32-bit systems.
This patch implements 64-bit read and write routines for APEI usage.
This patch re-factors similar functionality introduced in commit
04c25997c9, bringing it into the ACPI subsystem in preparation for
removing ./drivers/acpi/atomicio.[ch]. In the implementation I have
replicated acpi_os_read_memory() and acpi_os_write_memory(), creating
64-bit versions for APEI to utilize, as opposed to something more
elegant. My thinking is that we should attempt to see if we can get
ACPI's CA/OSL changed so that the existing acpi_read() and acpi_write()
interfaces are natively 64-bit capable and then subsequently remove the
replication.
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
This includes initial support for the recently published ACPI 5.0 spec.
In particular, support for the "hardware-reduced" bit that eliminates
the dependency on legacy hardware.
APEI has patches resulting from testing on real hardware.
Plus other random fixes.
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (52 commits)
acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec
intel_idle: Split up and provide per CPU initialization func
ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2
ACPI processor: Remove unneeded cpuidle_unregister_driver call
intel idle: Make idle driver more robust
intel_idle: Fix a cast to pointer from integer of different size warning in intel_idle
ACPI: kernel-parameters.txt : Add intel_idle.max_cstate
intel_idle: remove redundant local_irq_disable() call
ACPI processor: Fix error path, also remove sysdev link
ACPI: processor: fix acpi_get_cpuid for UP processor
intel_idle: fix API misuse
ACPI APEI: Convert atomicio routines
ACPI: Export interfaces for ioremapping/iounmapping ACPI registers
ACPI: Fix possible alignment issues with GAS 'address' references
ACPI, ia64: Use SRAT table rev to use 8bit or 16/32bit PXM fields (ia64)
ACPI, x86: Use SRAT table rev to use 8bit or 32bit PXM fields (x86/x86-64)
ACPI: Store SRAT table revision
ACPI, APEI, Resolve false conflict between ACPI NVS and APEI
ACPI, Record ACPI NVS regions
ACPI, APEI, EINJ, Refine the fix of resource conflict
...
ACPI 5.0 provides extensions to the EINJ mechanism to specify the
target for the error injection - by APICID for cpu related errors,
by address for memory related errors, and by segment/bus/device/function
for PCIe related errors. Also extensions for vendor specific error
injections.
Tested-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
APEI needs memory access in interrupt context. The obvious choice is
acpi_read(), but originally it couldn't be used in interrupt context
because it makes temporary mappings with ioremap(). Therefore, we added
drivers/acpi/atomicio.c, which provides:
acpi_pre_map_gar() -- ioremap in process context
acpi_atomic_read() -- memory access in interrupt context
acpi_post_unmap_gar() -- iounmap
Later we added acpi_os_map_generic_address() (2971852) and enhanced
acpi_read() so it works in interrupt context as long as the address has
been previously mapped (620242a). Now this sequence:
acpi_os_map_generic_address() -- ioremap in process context
acpi_read()/apei_read() -- now OK in interrupt context
acpi_os_unmap_generic_address()
is equivalent to what atomicio.c provides.
This patch introduces apei_read() and apei_write(), which currently are
functional equivalents of acpi_read() and acpi_write(). This is mainly
proactive, to prevent APEI breakages if acpi_read() and acpi_write()
are ever augmented to support the 'bit_offset' field of GAS, as APEI's
__apei_exec_write_register() precludes splitting up functionality
related to 'bit_offset' and APEI's 'mask' (see its
APEI_EXEC_PRESERVE_REGISTER block).
With apei_read() and apei_write() in place, usages of atomicio routines
are converted to apei_read()/apei_write() and existing calls within
osl.c and the CA, based on the re-factoring that was done in an earlier
patch series - http://marc.info/?l=linux-acpi&m=128769263327206&w=2:
acpi_pre_map_gar() --> acpi_os_map_generic_address()
acpi_post_unmap_gar() --> acpi_os_unmap_generic_address()
acpi_atomic_read() --> apei_read()
acpi_atomic_write() --> apei_write()
Note that acpi_read() and acpi_write() currently use 'bit_width'
for accessing GARs which seems incorrect. 'bit_width' is the size of
the register, while 'access_width' is the size of the access the
processor must generate on the bus. The 'access_width' may be larger,
for example, if the hardware only supports 32-bit or 64-bit reads. I
wanted to minimize any possible impacts with this patch series so I
did *not* change this behavior.
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Some firmware will access memory in ACPI NVS region via APEI. That
is, instructions in APEI ERST/EINJ table will read/write ACPI NVS
region. The original resource conflict checking in APEI code will
check memory/ioport accessed by APEI via general resource management
mech. But ACPI NVS region is marked as busy already, so that the
false resource conflict will prevent APEI ERST/EINJ to work.
To fix this, this patch excludes ACPI NVS regions when APEI components
request resources. So that they will not conflict with ACPI NVS
regions.
Reported-and-tested-by: Pavel Ivanov <paivanof@gmail.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Current fix for resource conflict is to remove the address region <param1 &
param2, ~param2+1> from trigger resource, which is highly relies on valid user
input. This patch is trying to avoid such potential issues by fetching the
exact address region from trigger action table entry.
Signed-off-by: Xiao, Hui <hui.xiao@linux.intel.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Some APEI firmware implementation will access injected address
specified in param1 to trigger the error when injecting memory error.
This will cause resource conflict with RAM.
On one of our testing machine, if injecting at memory address
0x10000000, the following error will be reported in dmesg:
APEI: Can not request iomem region <0000000010000000-0000000010000008> for GARs.
This patch removes the injecting memory address range from trigger
table resources to avoid conflict.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Because printk is not safe inside NMI handler, the recoverable error
records received in NMI handler will be queued to be printked in a
delayed IRQ context via irq_work. If a fatal error occurs after the
recoverable error and before the irq_work processed, we lost a error
report.
To solve the issue, the queued error records are printked in NMI
handler if system will go panic.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
In most cases, printk only guarantees messages from different printk
calling will not be interleaved between each other. But, one APEI
GHES hardware error report will involve multiple printk calling,
normally each for one line. So it is possible that the hardware error
report comes from different generic hardware error source will be
interleaved.
In this patch, a sequence number is prefixed to each line of error
report. So that, even if they are interleaved, they still can be
distinguished by the prefixed sequence number.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Because APEI tables are optional, these message may confuse users, for
example,
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/599715
Reported-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Use the normal %pR-like format for MMIO and I/O port ranges.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
aer_recover_queue() is called when recoverable PCIe AER errors are
notified by firmware to do the recovery work.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
module_param(bool) used to counter-intuitively take an int. In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.
It's time to remove the int/unsigned int option. For this version
it'll simply give a warning, but it'll break next kernel version.
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows a backend to filter on the dmesg reason as well as the pstore
reason. When ramoops is switched to pstore, this is needed since it has
no interest in storing non-crash dmesg details.
Drop pstore_write() as it has no users, and handling the "reason" here
has no obviously correct value.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
The buf_lock cannot be held while populating the inodes, so make the backend
pass forward an allocated and filled buffer instead. This solves the following
backtrace. The effect is that "buf" is only ever used to notify the backends
that something was written to it, and shouldn't be used in the read path.
To replace the buf_lock during the read path, isolate the open/read/close
loop with a separate mutex to maintain serialized access to the backend.
Note that is is up to the pstore backend to cope if the (*write)() path is
called in the middle of the read path.
[ 59.691019] BUG: sleeping function called from invalid context at .../mm/slub.c:847
[ 59.691019] in_atomic(): 0, irqs_disabled(): 1, pid: 1819, name: mount
[ 59.691019] Pid: 1819, comm: mount Not tainted 3.0.8 #1
[ 59.691019] Call Trace:
[ 59.691019] [<810252d5>] __might_sleep+0xc3/0xca
[ 59.691019] [<810a26e6>] kmem_cache_alloc+0x32/0xf3
[ 59.691019] [<810b53ac>] ? __d_lookup_rcu+0x6f/0xf4
[ 59.691019] [<810b68b1>] alloc_inode+0x2a/0x64
[ 59.691019] [<810b6903>] new_inode+0x18/0x43
[ 59.691019] [<81142447>] pstore_get_inode.isra.1+0x11/0x98
[ 59.691019] [<81142623>] pstore_mkfile+0xae/0x26f
[ 59.691019] [<810a2a66>] ? kmem_cache_free+0x19/0xb1
[ 59.691019] [<8116c821>] ? ida_get_new_above+0x140/0x158
[ 59.691019] [<811708ea>] ? __init_rwsem+0x1e/0x2c
[ 59.691019] [<810b67e8>] ? inode_init_always+0x111/0x1b0
[ 59.691019] [<8102127e>] ? should_resched+0xd/0x27
[ 59.691019] [<8137977f>] ? _cond_resched+0xd/0x21
[ 59.691019] [<81142abf>] pstore_get_records+0x52/0xa7
[ 59.691019] [<8114254b>] pstore_fill_super+0x7d/0x91
[ 59.691019] [<810a7ff5>] mount_single+0x46/0x82
[ 59.691019] [<8114231a>] pstore_mount+0x15/0x17
[ 59.691019] [<811424ce>] ? pstore_get_inode.isra.1+0x98/0x98
[ 59.691019] [<810a8199>] mount_fs+0x5a/0x12d
[ 59.691019] [<810b9174>] ? alloc_vfsmnt+0xa4/0x14a
[ 59.691019] [<810b9474>] vfs_kern_mount+0x4f/0x7d
[ 59.691019] [<810b9d7e>] do_kern_mount+0x34/0xb2
[ 59.691019] [<810bb15f>] do_mount+0x5fc/0x64a
[ 59.691019] [<810912fb>] ? strndup_user+0x2e/0x3f
[ 59.691019] [<810bb3cb>] sys_mount+0x66/0x99
[ 59.691019] [<8137b537>] sysenter_do_call+0x12/0x26
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
* 'pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
pstore: make pstore write function return normal success/fail value
pstore: change mutex locking to spin_locks
pstore: defer inserting OOPS entries into pstore
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
llist: Add back llist_add_batch() and llist_del_first() prototypes
sched: Don't use tasklist_lock for debug prints
sched: Warn on rt throttling
sched: Unify the ->cpus_allowed mask copy
sched: Wrap scheduler p->cpus_allowed access
sched: Request for idle balance during nohz idle load balance
sched: Use resched IPI to kick off the nohz idle balance
sched: Fix idle_cpu()
llist: Remove cpu_relax() usage in cmpxchg loops
sched: Convert to struct llist
llist: Add llist_next()
irq_work: Use llist in the struct irq_work logic
llist: Return whether list is empty before adding in llist_add()
llist: Move cpu_relax() to after the cmpxchg()
llist: Remove the platform-dependent NMI checks
llist: Make some llist functions inline
sched, tracing: Show PREEMPT_ACTIVE state in trace_sched_switch
sched: Remove redundant test in check_preempt_tick()
sched: Add documentation for bandwidth control
sched: Return unused runtime on group dequeue
...
Currently pstore write interface employs record id as return
value, but it is not enough because it can't tell caller if
the write operation is successful. Pass the record id back via
an argument pointer and return zero for success, non-zero for
failure.
Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Just convert all the files that have an nmi handler to the new routines.
Most of it is straight forward conversion. A couple of places needed some
tweaking like kgdb which separates the debug notifier from the nmi handler
and mce removes a call to notify_die.
[Thanks to Ying for finding out the history behind that mce call
https://lkml.org/lkml/2010/5/27/114
And Boris responding that he would like to remove that call because of it
https://lkml.org/lkml/2011/9/21/163]
The things that get converted are the registeration/unregistration routines
and the nmi handler itself has its args changed along with code removal
to check which list it is on (most are on one NMI list except for kgdb
which has both an NMI routine and an NMI Unknown routine).
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Corey Minyard <minyard@acm.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Jack Steiner <steiner@sgi.com>
Link: http://lkml.kernel.org/r/1317409584-23662-4-git-send-email-dzickus@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Because llist code will be used in performance critical scheduler
code path, make llist_add() and llist_del_all() inline to avoid
function calling overhead and related 'glue' overhead.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1315461646-1379-2-git-send-email-ying.huang@intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
pstore was using mutex locking to protect read/write access to the
backend plug-ins. This causes problems when pstore is executed in
an NMI context through panic() -> kmsg_dump().
This patch changes the mutex to a spin_lock_irqsave then also checks to
see if we are in an NMI context. If we are in an NMI and can't get the
lock, just print a message stating that and blow by the locking.
All this is probably a hack around the bigger locking problem but it
solves my current situation of trying to sleep in an NMI context.
Tested by loading the lkdtm module and executing a HARDLOCKUP which
will cause the machine to panic inside the nmi handler.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
IRQ_WORK is used by GHES, but it is selected by PERF_EVENT.
For now PERF_EVENT is selected by x86 by default, but
in concept, IRQ_WORK should be selected by GHES, not by others.
Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Bit 0 of the support parameter to the OSC call should be set in order to
indicate that the OS supports the WHEA mechanism. Stuart Hayes tracked
an APEI issue on some Dell platforms down to this.
Reported-by: Stuart Hayes <Stuart_Hayes@Dell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Some trivial conflicts due to other various merges
adding to the end of common lists sooner than this one.
arch/ia64/Kconfig
arch/powerpc/Kconfig
arch/x86/Kconfig
lib/Kconfig
lib/Makefile
Signed-off-by: Len Brown <len.brown@intel.com>
Linus Torvalds