Implement a minimal EFI app that decompresses the real kernel image and
launches it using the firmware's LoadImage and StartImage boot services.
This removes the need for any arch-specific hacks.
Note that on systems that have UEFI secure boot policies enabled,
LoadImage/StartImage require images to be signed, or their hashes known
a priori, in order to be permitted to boot.
There are various possible strategies to work around this requirement,
but they all rely either on overriding internal PI/DXE protocols (which
are not part of the EFI spec) or omitting the firmware provided
LoadImage() and StartImage() boot services, which is also undesirable,
given that they encapsulate platform specific policies related to secure
boot and measured boot, but also related to memory permissions (whether
or not and which types of heap allocations have both write and execute
permissions.)
The only generic and truly portable way around this is to simply sign
both the inner and the outer image with the same key/cert pair, so this
is what is implemented here.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
This patch adds efistub booting support, which is the standard UEFI boot
protocol for LoongArch to use.
We use generic efistub, which means we can pass boot information (i.e.,
system table, memory map, kernel command line, initrd) via a light FDT
and drop a lot of non-standard code.
We use a flat mapping to map the efi runtime in the kernel's address
space. In efi, VA = PA; in kernel, VA = PA + PAGE_OFFSET. As a result,
flat mapping is not identity mapping, SetVirtualAddressMap() is still
needed for the efi runtime.
Tested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
[ardb: change fpic to fpie as suggested by Xi Ruoyao]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Commit 5d9db88376 ("efi: Add support for a UEFI variable filesystem")
dated Oct 5, 2012, introduced a new efivarfs pseudo-filesystem to
replace the efivars sysfs interface that was used up to that point to
expose EFI variables to user space.
The main problem with the sysfs interface was that it only supported up
to 1024 bytes of payload per file, whereas the underlying variables
themselves are only bounded by a platform specific per-variable and
global limit that is typically much higher than 1024 bytes.
The deprecated sysfs interface is only enabled on x86 and Itanium, other
EFI enabled architectures only support the efivarfs pseudo-filesystem.
So let's finally rip off the band aid, and drop the old interface
entirely. This will make it easier to refactor and clean up the
underlying infrastructure that is shared between efivars, efivarfs and
efi-pstore, and is long overdue for a makeover.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Avoid the efivars layer and simply call the newly introduced EFI
varstore helpers instead. This simplifies the code substantially, and
also allows us to remove some hacks in the shared efivars layer that
were added for efi-pstore specifically.
In order to be able to delete the EFI variable associated with a record,
store the UTF-16 name of the variable in the pstore record's priv field.
That way, we don't have to make guesses regarding which variable the
record may have been loaded from.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Avoid abusing the efivar API by passing locally instantiated
efivar_entry structs into efivar_set_entry_safe(), rather than using the
API as intended. Instead, just call efi.set_variable() directly.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Geert reports that the new option CONFIG_EFI_DISABLE_RUNTIME is user
visible even when EFI support is disabled, which is unnecessary and
clutters the Kconfig interface.
So let's move this option into the existing Kconfig submenu that already
depends on CONFIG_EFI, and while at it, give some other options the same
treatment.
Also clean up a small wart where the efi/ subdirectory is listed twice.
Let's just list it unconditionally so that both EFI and UEFI_CPER based
pieces will be built independently (the latter only depends on the
former on !X86)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
There are UEFI versions that restrict execution of memory regions,
preventing the kernel from booting. Parts that needs to be executable
are:
* Area used for trampoline placement.
* All memory regions that the kernel may be relocated before
and during extraction.
Use DXE services to ensure aforementioned address ranges
to be executable. Only modify attributes that does not
have appropriate attributes.
Signed-off-by: Baskov Evgeniy <baskov@ispras.ru>
Link: https://lore.kernel.org/r/20220303142120.1975-3-baskov@ispras.ru
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Confidential computing (coco) hardware such as AMD SEV (Secure Encrypted
Virtualization) allows a guest owner to inject secrets into the VMs
memory without the host/hypervisor being able to read them.
Firmware support for secret injection is available in OVMF, which
reserves a memory area for secret injection and includes a pointer to it
the in EFI config table entry LINUX_EFI_COCO_SECRET_TABLE_GUID.
If EFI exposes such a table entry, uefi_init() will keep a pointer to
the EFI config table entry in efi.coco_secret, so it can be used later
by the kernel (specifically drivers/virt/coco/efi_secret). It will also
appear in the kernel log as "CocoSecret=ADDRESS"; for example:
[ 0.000000] efi: EFI v2.70 by EDK II
[ 0.000000] efi: CocoSecret=0x7f22e680 SMBIOS=0x7f541000 ACPI=0x7f77e000 ACPI 2.0=0x7f77e014 MEMATTR=0x7ea0c018
The new functionality can be enabled with CONFIG_EFI_COCO_SECRET=y.
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://lore.kernel.org/r/20220412212127.154182-2-dovmurik@linux.ibm.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Commit d9f283ae71 ("efi: Disable runtime services on RT") disabled EFI
runtime services by default when the CONFIG_PREEMPT_RT option is enabled.
The rationale for that commit is that some EFI calls could take too much
time, leading to large latencies which is an issue for Real-Time kernels.
But a side effect of that change was that now is not possible anymore to
enable the EFI runtime services by default when CONFIG_PREEMPT_RT is set,
without passing an efi=runtime command line parameter to the kernel.
Instead, let's add a new EFI_DISABLE_RUNTIME boolean Kconfig option, that
would be set to n by default but to y if CONFIG_PREEMPT_RT is enabled.
That way, the current behaviour is preserved but gives users a mechanism
to enable the EFI runtimes services in their kernels if that is required.
For example, if the firmware could guarantee bounded time for EFI calls.
Also, having a separate boolean config could allow users to disable the
EFI runtime services by default even when CONFIG_PREEMPT_RT is not set.
Reported-by: Alexander Larsson <alexl@redhat.com>
Fixes: d9f283ae71 ("efi: Disable runtime services on RT")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20220331151654.184433-1-javierm@redhat.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
- Don't move BSS section around pointlessly in the x86 decompressor
- Refactor helper for discovering the EFI secure boot mode
- Wire up EFI secure boot to IMA for arm64
- Some fixes for the capsule loader
- Expose the RT_PROP table via the EFI test module
- Relax DT and kernel placement restrictions on ARM
+ followup fixes:
- fix the build breakage on IA64 caused by recent capsule loader changes
- suppress a type mismatch build warning in the expansion of
EFI_PHYS_ALIGN on ARM
-----BEGIN PGP SIGNATURE-----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=n7Gc
-----END PGP SIGNATURE-----
Merge tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Borislav Petkov:
"These got delayed due to a last minute ia64 build issue which got
fixed in the meantime.
EFI updates collected by Ard Biesheuvel:
- Don't move BSS section around pointlessly in the x86 decompressor
- Refactor helper for discovering the EFI secure boot mode
- Wire up EFI secure boot to IMA for arm64
- Some fixes for the capsule loader
- Expose the RT_PROP table via the EFI test module
- Relax DT and kernel placement restrictions on ARM
with a few followup fixes:
- fix the build breakage on IA64 caused by recent capsule loader
changes
- suppress a type mismatch build warning in the expansion of
EFI_PHYS_ALIGN on ARM"
* tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: arm: force use of unsigned type for EFI_PHYS_ALIGN
efi: ia64: disable the capsule loader
efi: stub: get rid of efi_get_max_fdt_addr()
efi/efi_test: read RuntimeServicesSupported
efi: arm: reduce minimum alignment of uncompressed kernel
efi: capsule: clean scatter-gather entries from the D-cache
efi: capsule: use atomic kmap for transient sglist mappings
efi: x86/xen: switch to efi_get_secureboot_mode helper
arm64/ima: add ima_arch support
ima: generalize x86/EFI arch glue for other EFI architectures
efi: generalize efi_get_secureboot
efi/libstub: EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER should not default to yes
efi/x86: Only copy the compressed kernel image in efi_relocate_kernel()
efi/libstub/x86: simplify efi_is_native()
EFI capsule loading is a feature that was introduced into EFI long after
its initial introduction on Itanium, and it is highly unlikely that IA64
systems are receiving firmware updates in the first place, let alone
using EFI capsules.
So let's disable capsule support altogether on IA64. This fixes a build
error on IA64 due to a recent change that added an unconditional
include of asm/efi.h, which IA64 does not provide.
While at it, tweak the make rules a bit so that the EFI capsule
component that is always builtin (even if the EFI capsule loader itself
is built as a module) is omitted for all architectures if the module is
not enabled in the build.
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/linux-efi/20201214152200.38353-1-ardb@kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
CONFIG_EFI_EARLYCON defaults to yes, and thus is enabled on systems that
do not support EFI, or do not have EFI support enabled, but do satisfy
the symbol's other dependencies.
While drivers/firmware/efi/ won't be entered during the build phase if
CONFIG_EFI=n, and drivers/firmware/efi/earlycon.c itself thus won't be
built, enabling EFI_EARLYCON does force-enable CONFIG_FONT_SUPPORT and
CONFIG_ARCH_USE_MEMREMAP_PROT, and CONFIG_FONT_8x16, which is
undesirable.
Fix this by making CONFIG_EFI_EARLYCON depend on CONFIG_EFI.
This reduces kernel size on headless systems by more than 4 KiB.
Fixes: 69c1f396f2 ("efi/x86: Convert x86 EFI earlyprintk into generic earlycon implementation")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20201124191646.3559757-1-geert@linux-m68k.org
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER is deprecated, so it should not
be enabled by default.
In light of commit 4da0b2b7e6 ("efi/libstub: Re-enable command
line initrd loading for x86"), keep the default for X86.
Fixes: cf6b836648 ("efi/libstub: Make initrd file loader configurable")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20201028153402.1736103-1-geert+renesas@glider.be
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
This contains a handful of cleanups and new features, including:
* A handful of cleanups for our page fault handling.
* Improvements to how we fill out cacheinfo.
* Support for EFI-based systems.
---
This contains a merge from the EFI tree that was necessary as some of the EFI
support landed over there. It's my first time doing something like this,
I haven't included the set_fs stuff because the base branch it depends on
hasn't been merged yet. I'll probably have another merge window PR, as
there's more in flight (most notably the fix for new binutils I just sent out),
but I figured there was no reason to delay this any longer.
-----BEGIN PGP SIGNATURE-----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=FYs/
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.10-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"A handful of cleanups and new features:
- A handful of cleanups for our page fault handling
- Improvements to how we fill out cacheinfo
- Support for EFI-based systems"
* tag 'riscv-for-linus-5.10-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (22 commits)
RISC-V: Add page table dump support for uefi
RISC-V: Add EFI runtime services
RISC-V: Add EFI stub support.
RISC-V: Add PE/COFF header for EFI stub
RISC-V: Implement late mapping page table allocation functions
RISC-V: Add early ioremap support
RISC-V: Move DT mapping outof fixmap
RISC-V: Fix duplicate included thread_info.h
riscv/mm/fault: Set FAULT_FLAG_INSTRUCTION flag in do_page_fault()
riscv/mm/fault: Fix inline placement in vmalloc_fault() declaration
riscv: Add cache information in AUX vector
riscv: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO
riscv: Set more data to cacheinfo
riscv/mm/fault: Move access error check to function
riscv/mm/fault: Move FAULT_FLAG_WRITE handling in do_page_fault()
riscv/mm/fault: Simplify mm_fault_error()
riscv/mm/fault: Move fault error handling to mm_fault_error()
riscv/mm/fault: Simplify fault error handling
riscv/mm/fault: Move vmalloc fault handling to vmalloc_fault()
riscv/mm/fault: Move bad area handling to bad_area()
...
Add a RISC-V architecture specific stub code that actually copies the
actual kernel image to a valid address and jump to it after boot services
are terminated. Enable UEFI related kernel configs as well for RISC-V.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Link: https://lore.kernel.org/r/20200421033336.9663-4-atish.patra@wdc.com
[ardb: - move hartid fetch into check_platform_features()
- use image_size not reserve_size
- select ISA_C
- do not use dram_base]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
CONFIG_EFI_VARS controls the code that exposes EFI variables via
sysfs entries, which was deprecated before support for non-Intel
architectures was added to EFI. So let's limit its availability
to Intel architectures for the time being, and hopefully remove
it entirely in the not too distant future.
While at it, let's remove the module alias so that the module is
no longer loaded automatically.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Remove some false dependencies on CONFIG_EFI_VARS, which only controls
the creation of the sysfs entries, whereas the underlying functionality
that these modules rely on is enabled unconditionally when CONFIG_EFI
is set.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The EFI pstore implementation relies on the 'efivars' abstraction,
which encapsulates the EFI variable store in a way that can be
overridden by other backing stores, like the Google SMI one.
On top of that, the EFI pstore implementation also relies on the
efivars.ko module, which is a separate layer built on top of the
'efivars' abstraction that exposes the [deprecated] sysfs entries
for each variable that exists in the backing store.
Since the efivars.ko module is deprecated, and all users appear to
have moved to the efivarfs file system instead, let's prepare for
its removal, by removing EFI pstore's dependency on it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
In most cases, such as CONFIG_ACPI_CUSTOM_DSDT and
CONFIG_ACPI_TABLE_UPGRADE, boot-time modifications to firmware tables
are tied to specific Kconfig options. Currently this is not the case
for modifying the ACPI SSDT via the efivar_ssdt kernel command line
option and associated EFI variable.
This patch adds CONFIG_EFI_CUSTOM_SSDT_OVERLAYS, which defaults
disabled, in order to allow enabling or disabling that feature during
the build.
Cc: <stable@vger.kernel.org>
Signed-off-by: Peter Jones <pjones@redhat.com>
Link: https://lore.kernel.org/r/20200615202408.2242614-1-pjones@redhat.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit:
cf6b836648 ("efi/libstub: Make initrd file loader configurable")
inadvertently disabled support on x86 for loading an initrd passed via
the initrd= option on the kernel command line.
Add X86 to the newly introduced Kconfig option's title and depends
declarations, so it gets enabled by default, as before.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-efi@vger.kernel.org
Loading an initrd passed via the kernel command line is deprecated: it
is limited to files that reside in the same volume as the one the kernel
itself was loaded from, and we have more flexible ways to achieve the
same. So make it configurable so new architectures can decide not to
enable it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Most of the arm-stub code is written in an architecture independent manner.
As a result, RISC-V can reuse most of the arm-stub code.
Rename the arm-stub.c to efi-stub.c so that ARM, ARM64 and RISC-V can use it.
This patch doesn't introduce any functional changes.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Link: https://lore.kernel.org/r/20200415195422.19866-2-atish.patra@wdc.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Just like with PCI options ROMs, which we save in the setup_efi_pci*
functions from arch/x86/boot/compressed/eboot.c, the EFI code / ROM itself
sometimes may contain data which is useful/necessary for peripheral drivers
to have access to.
Specifically the EFI code may contain an embedded copy of firmware which
needs to be (re)loaded into the peripheral. Normally such firmware would be
part of linux-firmware, but in some cases this is not feasible, for 2
reasons:
1) The firmware is customized for a specific use-case of the chipset / use
with a specific hardware model, so we cannot have a single firmware file
for the chipset. E.g. touchscreen controller firmwares are compiled
specifically for the hardware model they are used with, as they are
calibrated for a specific model digitizer.
2) Despite repeated attempts we have failed to get permission to
redistribute the firmware. This is especially a problem with customized
firmwares, these get created by the chip vendor for a specific ODM and the
copyright may partially belong with the ODM, so the chip vendor cannot
give a blanket permission to distribute these.
This commit adds support for finding peripheral firmware embedded in the
EFI code and makes the found firmware available through the new
efi_get_embedded_fw() function.
Support for loading these firmwares through the standard firmware loading
mechanism is added in a follow-up commit in this patch-series.
Note we check the EFI_BOOT_SERVICES_CODE for embedded firmware near the end
of start_kernel(), just before calling rest_init(), this is on purpose
because the typical EFI_BOOT_SERVICES_CODE memory-segment is too large for
early_memremap(), so the check must be done after mm_init(). This relies
on EFI_BOOT_SERVICES_CODE not being free-ed until efi_free_boot_services()
is called, which means that this will only work on x86 for now.
Reported-by: Dave Olsthoorn <dave@bewaar.me>
Suggested-by: Peter Jones <pjones@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200115163554.101315-3-hdegoede@redhat.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Add an option to disable the busmaster bit in the control register on
all PCI bridges before calling ExitBootServices() and passing control
to the runtime kernel. System firmware may configure the IOMMU to prevent
malicious PCI devices from being able to attack the OS via DMA. However,
since firmware can't guarantee that the OS is IOMMU-aware, it will tear
down IOMMU configuration when ExitBootServices() is called. This leaves
a window between where a hostile device could still cause damage before
Linux configures the IOMMU again.
If CONFIG_EFI_DISABLE_PCI_DMA is enabled or "efi=disable_early_pci_dma"
is passed on the command line, the EFI stub will clear the busmaster bit
on all PCI bridges before ExitBootServices() is called. This will
prevent any malicious PCI devices from being able to perform DMA until
the kernel reenables busmastering after configuring the IOMMU.
This option may cause failures with some poorly behaved hardware and
should not be enabled without testing. The kernel commandline options
"efi=disable_early_pci_dma" or "efi=no_disable_early_pci_dma" may be
used to override the default. Note that PCI devices downstream from PCI
bridges are disconnected from their drivers first, using the UEFI
driver model API, so that DMA can be disabled safely at the bridge
level.
[ardb: disconnect PCI I/O handles first, as suggested by Arvind]
Co-developed-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Matthew Garrett <matthewgarrett@google.com>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20200103113953.9571-18-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
UEFI 2.8 defines an EFI_MEMORY_SP attribute bit to augment the
interpretation of the EFI Memory Types as "reserved for a specific
purpose".
The proposed Linux behavior for specific purpose memory is that it is
reserved for direct-access (device-dax) by default and not available for
any kernel usage, not even as an OOM fallback. Later, through udev
scripts or another init mechanism, these device-dax claimed ranges can
be reconfigured and hot-added to the available System-RAM with a unique
node identifier. This device-dax management scheme implements "soft" in
the "soft reserved" designation by allowing some or all of the
reservation to be recovered as typical memory. This policy can be
disabled at compile-time with CONFIG_EFI_SOFT_RESERVE=n, or runtime with
efi=nosoftreserve.
As for this patch, define the common helpers to determine if the
EFI_MEMORY_SP attribute should be honored. The determination needs to be
made early to prevent the kernel from being loaded into soft-reserved
memory, or otherwise allowing early allocations to land there. Follow-on
changes are needed per architecture to leverage these helpers in their
respective mem-init paths.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For the EFI_RCI2_TABLE Kconfig option, 'make oldconfig' asks the user
for input on platforms where the option may not be applicable. This patch
modifies the Kconfig option to ask the user for input only when CONFIG_X86
or CONFIG_COMPILE_TEST is set to y.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Narendra K <Narendra.K@dell.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191029173755.27149-2-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
System firmware advertises the address of the 'Runtime
Configuration Interface table version 2 (RCI2)' via
an EFI Configuration Table entry. This code retrieves the RCI2
table from the address and exports it to sysfs as a binary
attribute 'rci2' under /sys/firmware/efi/tables directory.
The approach adopted is similar to the attribute 'DMI' under
/sys/firmware/dmi/tables.
RCI2 table contains BIOS HII in XML format and is used to populate
BIOS setup page in Dell EMC OpenManage Server Administrator tool.
The BIOS setup page contains BIOS tokens which can be configured.
Signed-off-by: Narendra K <Narendra.K@dell.com>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the x86 EFI earlyprintk implementation to a shared location under
drivers/firmware and tweak it slightly so we can expose it as an earlycon
implementation (which is generic) rather than earlyprintk (which is only
implemented for a few architectures)
This also involves switching to write-combine mappings by default (which
is required on ARM since device mappings lack memory semantics, and so
memcpy/memset may not be used on them), and adding support for shared
memory framebuffers on cache coherent non-x86 systems (which do not
tolerate mismatched attributes).
Note that 32-bit ARM does not populate its struct screen_info early
enough for earlycon=efifb to work, so it is disabled there.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20190202094119.13230-10-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Default EFI_ARMSTUB_DTB_LOADER to y to allow the dtb= command
line parameter to function with efi loader.
Required for development purposes and to boot on existing bootloaders
that do not support devicetree provided by the firmware or by the
bootloader.
Fixes: 3d7ee348aa ("efi/libstub/arm: Add opt-in Kconfig option ...")
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
There are various ways a platform can provide a device tree binary
to the kernel, with different levels of sophistication:
- ideally, the UEFI firmware, which is tightly coupled with the
platform, provides a device tree image directly as a UEFI
configuration table, and typically permits the contents to be
manipulated either via menu options or via UEFI environment
variables that specify a replacement image,
- GRUB for ARM has a 'devicetree' directive which allows a device
tree image to be loaded from any location accessible to GRUB, and
supersede the one provided by the firmware,
- the EFI stub implements a dtb= command line option that allows a
device tree image to be loaded from a file residing in the same
file system as the one the kernel image was loaded from.
The dtb= command line option was never intended to be more than a
development feature, to allow the other options to be implemented
in parallel. So let's make it an opt-in feature that is disabled
by default, but can be re-enabled at will.
Note that we already disable the dtb= command line option when we
detect that we are running with UEFI Secure Boot enabled.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180711094040.12506-7-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Recognize the IA32/X64 Processor Error Section.
Do the section decoding in a new "cper-x86.c" file and add this to the
Makefile depending on a new "UEFI_CPER_X86" config option.
Print the Local APIC ID and CPUID info from the Processor Error Record.
The "Processor Error Info" and "Processor Context" fields will be
decoded in following patches.
Based on UEFI 2.7 Table 252. Processor Error Record.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180504060003.19618-5-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A pretty big batch of Kconfig updates. I have to mention the lexer
and parser of Kconfig are now built from real .l and .y sources.
So, flex and bison are the requirement for building the kernel.
Both of them (unlike gperf) have been stable for a long time. This
change has been tested several weeks in linux-next, and I did not
receive any problem report about this.
Summary:
- Add checks for mistakes, like the choice default is not in
choice, help is doubled
- Document data structure and complex code
- Fix various memory leaks
- Change Makefile to build lexer and parser instead of using
pre-generated C files
- Drop 'boolean' keyword, which is equivalent to 'bool'
- Use default 'yy' prefix and remove unneeded Make variables
- Fix gettext() check for xconfig
- Announce that oldnoconfig will be finally removed
- Make 'Selected by:' and 'Implied by' readable in help and
search result
- Hide silentoldconfig from 'make help' to stop confusing people
- Fix misc things and cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=rsi/
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
"A pretty big batch of Kconfig updates.
I have to mention the lexer and parser of Kconfig are now built from
real .l and .y sources. So, flex and bison are the requirement for
building the kernel. Both of them (unlike gperf) have been stable for
a long time. This change has been tested several weeks in linux-next,
and I did not receive any problem report about this.
Summary:
- add checks for mistakes, like the choice default is not in choice,
help is doubled
- document data structure and complex code
- fix various memory leaks
- change Makefile to build lexer and parser instead of using
pre-generated C files
- drop 'boolean' keyword, which is equivalent to 'bool'
- use default 'yy' prefix and remove unneeded Make variables
- fix gettext() check for xconfig
- announce that oldnoconfig will be finally removed
- make 'Selected by:' and 'Implied by' readable in help and search
result
- hide silentoldconfig from 'make help' to stop confusing people
- fix misc things and cleanups"
* tag 'kconfig-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (37 commits)
kconfig: Remove silentoldconfig from help and docs; fix kconfig/conf's help
kconfig: make "Selected by:" and "Implied by:" readable
kconfig: announce removal of oldnoconfig if used
kconfig: fix make xconfig when gettext is missing
kconfig: Clarify menu and 'if' dependency propagation
kconfig: Document 'if' flattening logic
kconfig: Clarify choice dependency propagation
kconfig: Document SYMBOL_OPTIONAL logic
kbuild: remove unnecessary LEX_PREFIX and YACC_PREFIX
kconfig: use default 'yy' prefix for lexer and parser
kconfig: make conf_unsaved a local variable of conf_read()
kconfig: make xfgets() really static
kconfig: make input_mode static
kconfig: Warn if there is more than one help text
kconfig: drop 'boolean' keyword
kconfig: use bool instead of boolean for type definition attributes, again
kconfig: Remove menu_end_entry()
kconfig: Document important expression functions
kconfig: Document automatic submenu creation code
kconfig: Fix choice symbol expression leak
...
Commit 6341e62b21 ("kconfig: use bool instead of boolean for type
definition attributes") did treewide replacement of 'boolean', and
also mentioned the keyword 'boolean' would be dropped later on.
Some years have passed, but it has not happened yet. Meanwhile, some
new instances have come up.
I am really going to drop this keyword. I need to do the replacement
once again.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some distributions have turned on the reset attack mitigation feature,
which is designed to force the platform to clear the contents of RAM if
the machine is shut down uncleanly. However, in order for the platform
to be able to determine whether the shutdown was clean or not, userspace
has to be configured to clear the MemoryOverwriteRequest flag on
shutdown - otherwise the firmware will end up clearing RAM on every
reboot, which is unnecessarily time consuming. Add some additional
clarity to the kconfig text to reduce the risk of systems being
configured this way.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The ARM CPER code is currently mixed in with the other CPER code. Move it
to a new file to separate it from the rest of the CPER code.
Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasyl Gomonovych <gomonovych@gmail.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180102181042.19074-5-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If a machine is reset while secrets are present in RAM, it may be
possible for code executed after the reboot to extract those secrets
from untouched memory. The Trusted Computing Group specified a mechanism
for requesting that the firmware clear all RAM on reset before booting
another OS. This is done by setting the MemoryOverwriteRequestControl
variable at startup. If userspace can ensure that all secrets are
removed as part of a controlled shutdown, it can reset this variable to
0 before triggering a hardware reboot.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20170825155019.6740-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The firmware for Quark X102x prepends a security header to the capsule
which is needed to support the mandatory secure boot on this processor.
The header can be detected by checking for the "_CSH" signature and -
to avoid any GUID conflict - validating its size field to contain the
expected value. Then we need to look for the EFI header right after the
security header and pass the real header to __efi_capsule_setup_info.
To be minimal invasive and maximal safe, the quirk version of
efi_capsule_setup_info() is only effective on Quark processors.
Tested-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20170602135207.21708-11-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Apple's EFI drivers supply device properties which are needed to support
Macs optimally. They contain vital information which cannot be obtained
any other way (e.g. Thunderbolt Device ROM). They're also used to convey
the current device state so that OS drivers can pick up where EFI
drivers left (e.g. GPU mode setting).
There's an EFI driver dubbed "AAPL,PathProperties" which implements a
per-device key/value store. Other EFI drivers populate it using a custom
protocol. The macOS bootloader /System/Library/CoreServices/boot.efi
retrieves the properties with the same protocol. The kernel extension
AppleACPIPlatform.kext subsequently merges them into the I/O Kit
registry (see ioreg(8)) where they can be queried by other kernel
extensions and user space.
This commit extends the efistub to retrieve the device properties before
ExitBootServices is called. It assigns them to devices in an fs_initcall
so that they can be queried with the API in <linux/property.h>.
Note that the device properties will only be available if the kernel is
booted with the efistub. Distros should adjust their installers to
always use the efistub on Macs. grub with the "linux" directive will not
work unless the functionality of this commit is duplicated in grub.
(The "linuxefi" directive should work but is not included upstream as of
this writing.)
The custom protocol has GUID 91BD12FE-F6C3-44FB-A5B7-5122AB303AE0 and
looks like this:
typedef struct {
unsigned long version; /* 0x10000 */
efi_status_t (*get) (
IN struct apple_properties_protocol *this,
IN struct efi_dev_path *device,
IN efi_char16_t *property_name,
OUT void *buffer,
IN OUT u32 *buffer_len);
/* EFI_SUCCESS, EFI_NOT_FOUND, EFI_BUFFER_TOO_SMALL */
efi_status_t (*set) (
IN struct apple_properties_protocol *this,
IN struct efi_dev_path *device,
IN efi_char16_t *property_name,
IN void *property_value,
IN u32 property_value_len);
/* allocates copies of property name and value */
/* EFI_SUCCESS, EFI_OUT_OF_RESOURCES */
efi_status_t (*del) (
IN struct apple_properties_protocol *this,
IN struct efi_dev_path *device,
IN efi_char16_t *property_name);
/* EFI_SUCCESS, EFI_NOT_FOUND */
efi_status_t (*get_all) (
IN struct apple_properties_protocol *this,
OUT void *buffer,
IN OUT u32 *buffer_len);
/* EFI_SUCCESS, EFI_BUFFER_TOO_SMALL */
} apple_properties_protocol;
Thanks to Pedro Vilaça for this blog post which was helpful in reverse
engineering Apple's EFI drivers and bootloader:
https://reverse.put.as/2016/06/25/apple-efi-firmware-passwords-and-the-scbo-myth/
If someone at Apple is reading this, please note there's a memory leak
in your implementation of the del() function as the property struct is
freed but the name and value allocations are not.
Neither the macOS bootloader nor Apple's EFI drivers check the protocol
version, but we do to avoid breakage if it's ever changed. It's been the
same since at least OS X 10.6 (2009).
The get_all() function conveniently fills a buffer with all properties
in marshalled form which can be passed to the kernel as a setup_data
payload. The number of device properties is dynamic and can change
between a first invocation of get_all() (to determine the buffer size)
and a second invocation (to retrieve the actual buffer), hence the
peculiar loop which does not finish until the buffer size settles.
The macOS bootloader does the same.
The setup_data payload is later on unmarshalled in an fs_initcall. The
idea is that most buses instantiate devices in "subsys" initcall level
and drivers are usually bound to these devices in "device" initcall
level, so we assign the properties in-between, i.e. in "fs" initcall
level.
This assumes that devices to which properties pertain are instantiated
from a "subsys" initcall or earlier. That should always be the case
since on macOS, AppleACPIPlatformExpert::matchEFIDevicePath() only
supports ACPI and PCI nodes and we've fully scanned those buses during
"subsys" initcall level.
The second assumption is that properties are only needed from a "device"
initcall or later. Seems reasonable to me, but should this ever not work
out, an alternative approach would be to store the property sets e.g. in
a btree early during boot. Then whenever device_add() is called, an EFI
Device Path would have to be constructed for the newly added device,
and looked up in the btree. That way, the property set could be assigned
to the device immediately on instantiation. And this would also work for
devices instantiated in a deferred fashion. It seems like this approach
would be more complicated and require more code. That doesn't seem
justified without a specific use case.
For comparison, the strategy on macOS is to assign properties to objects
in the ACPI namespace (AppleACPIPlatformExpert::mergeEFIProperties()).
That approach is definitely wrong as it fails for devices not present in
the namespace: The NHI EFI driver supplies properties for attached
Thunderbolt devices, yet on Macs with Thunderbolt 1 only one device
level behind the host controller is described in the namespace.
Consequently macOS cannot assign properties for chained devices. With
Thunderbolt 2 they started to describe three device levels behind host
controllers in the namespace but this grossly inflates the SSDT and
still fails if the user daisy-chained more than three devices.
We copy the property names and values from the setup_data payload to
swappable virtual memory and afterwards make the payload available to
the page allocator. This is just for the sake of good housekeeping, it
wouldn't occupy a meaningful amount of physical memory (4444 bytes on my
machine). Only the payload is freed, not the setup_data header since
otherwise we'd break the list linkage and we cannot safely update the
predecessor's ->next link because there's no locking for the list.
The payload is currently not passed on to kexec'ed kernels, same for PCI
ROMs retrieved by setup_efi_pci(). This can be added later if there is
demand by amending setup_efi_state(). The payload can then no longer be
made available to the page allocator of course.
Tested-by: Lukas Wunner <lukas@wunner.de> [MacBookPro9,1]
Tested-by: Pierre Moreau <pierre.morrow@free.fr> [MacBookPro11,3]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Andreas Noever <andreas.noever@gmail.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pedro Vilaça <reverser@put.as>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: grub-devel@gnu.org
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20161112213237.8804-9-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We're about to extended the efistub to retrieve device properties from
EFI on Apple Macs. The properties use EFI Device Paths to indicate the
device they belong to. This commit adds a parser which, given an EFI
Device Path, locates the corresponding struct device and returns a
reference to it.
Initially only ACPI and PCI Device Path nodes are supported, these are
the only types needed for Apple device properties (the corresponding
macOS function AppleACPIPlatformExpert::matchEFIDevicePath() does not
support any others). Further node types can be added with little to
moderate effort.
Apple device properties is currently the only use case of this parser,
but Peter Jones intends to use it to match up devices with the
ConInDev/ConOutDev/ErrOutDev variables and add sysfs attributes to these
devices to say the hardware supports using them as console. Thus,
make this parser a separate component which can be selected with config
option EFI_DEV_PATH_PARSER. It can in principle be compiled as a module
if acpi_get_first_physical_node() and acpi_bus_type are exported (and
efi_get_device_by_path() itself is exported).
The dependency on CONFIG_ACPI is needed for acpi_match_device_ids().
It can be removed if an empty inline stub is added for that function.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Andreas Noever <andreas.noever@gmail.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20161112213237.8804-7-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This driver is used by the Firmware Test Suite (FWTS) for testing the UEFI
runtime interfaces readiness of the firmware.
This driver exports UEFI runtime service interfaces into userspace,
which allows to use and test UEFI runtime services provided by the
firmware.
This driver uses the efi.<service> function pointers directly instead of
going through the efivar API to allow for direct testing of the UEFI
runtime service interfaces provided by the firmware.
Details for FWTS are available from,
<https://wiki.ubuntu.com/FirmwareTestSuite>
Signed-off-by: Ivan Hu <ivan.hu@canonical.com>
Cc: joeyli <jlee@suse.com>
Cc: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
This patch introduces a kernel module to expose a capsule loader
interface (misc char device file note) for users to upload capsule
binaries.
Example:
cat firmware.bin > /dev/efi_capsule_loader
Any upload error will be returned while doing "cat" through file
operation write() function call.
Signed-off-by: Kweh, Hock Leong <hock.leong.kweh@intel.com>
[ Update comments and Kconfig text ]
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Reviewed-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: joeyli <jlee@suse.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-30-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This module installs a reboot callback, such that if reboot() is invoked
with a string argument NNN, "NNN" is copied to the "LoaderEntryOneShot"
EFI variable, to be read by the bootloader.
If the string matches one of the boot labels defined in its configuration,
the bootloader will boot once to that label. The "LoaderEntryRebootReason"
EFI variable is set with the reboot reason: "reboot", "shutdown".
The bootloader reads this reboot reason and takes particular action
according to its policy.
There are reboot implementations that do "reboot <reason>", such as
Android's reboot command and Upstart's reboot replacement, which pass
the reason as an argument to the reboot syscall. There is no
platform-agnostic way how those could be modified to pass the reason
to the bootloader, regardless of platform or bootloader.
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stefan Stanacar <stefan.stanacar@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-26-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
non-modular by ripping out the module_* code since Kconfig doesn't
allow it to be built as a module anyway - Paul Gortmaker
* Make the x86 efi=debug kernel parameter, which enables EFI debug
code and output, generic and usable by arm64 - Leif Lindholm
* Add support to the x86 EFI boot stub for 64-bit Graphics Output
Protocol frame buffer addresses - Matt Fleming
* Detect when the UEFI v2.5 EFI_PROPERTIES_TABLE feature is enabled
in the firmware and set an efi.flags bit so the kernel knows when
it can apply more strict runtime mapping attributes - Ard Biesheuvel
* Auto-load the efi-pstore module on EFI systems, just like we
currently do for the efivars module - Ben Hutchings
* Add "efi_fake_mem" kernel parameter which allows the system's EFI
memory map to be updated with additional attributes for specific
memory ranges. This is useful for testing the kernel code that handles
the EFI_MEMORY_MORE_RELIABLE memmap bit even if your firmware
doesn't include support - Taku Izumi
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJWG7OwAAoJEC84WcCNIz1VEEEP/0SsdrwJ66B4MfP5YNjqHYWm
+OTHR6Ovv2i10kc+NjOV/GN8sWPndnkLfIfJ4EqJ9BoQ9PDEYZilV2aleSQ4DrPm
H7uGwBXQkfd76tZKX9pMToK76mkhg6M7M2LR3Suv3OGfOEzuozAOt3Ez37lpksTN
2ByhHr/oGbhu99jC2ki5+k0ySH8PMqDBRxqrPbBzTD+FfB7bM11vAJbSNbSMQ21R
ZwX0acZBLqb9J2Vf7tDsW+fCfz0TFo8JHW8jdLRFm/y2dpquzxswkkBpODgA8+VM
0F5UbiUdkaIRug75I6N/OJ8+yLwdzuxm7ul+tbS3JrXGLAlK3850+dP2Pr5zQ2Ce
zaYGRUy+tD5xMXqOKgzpu+Ia8XnDRLhOlHabiRd5fG6ZC9nR8E9uK52g79voSN07
pADAJnVB03CGV/HdduDOI4C4UykUKubuArbQVkqWJcecV1Jic/tYI0gjeACmU1VF
v8FzXpBUe3U3A0jauOz8PBz8M+k5qky/GbIrnEvXreBtKdt999LN9fykTN7rBOpo
dk/6vTR1Jyv3aYc9EXHmRluktI6KmfWCqmRBOIgQveX1VhdRM+1w2LKC0+8co3dF
v/DBh19KDyfPI8eOvxKykhn164UeAt03EXqDa46wFGr2nVOm/JiShL/d+QuyYU4G
8xb/rET4JrhCG4gFMUZ7
=1Oee
-----END PGP SIGNATURE-----
Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into core/efi
Pull v4.4 EFI updates from Matt Fleming:
- Make the EFI System Resource Table (ESRT) driver explicitly
non-modular by ripping out the module_* code since Kconfig doesn't
allow it to be built as a module anyway. (Paul Gortmaker)
- Make the x86 efi=debug kernel parameter, which enables EFI debug
code and output, generic and usable by arm64. (Leif Lindholm)
- Add support to the x86 EFI boot stub for 64-bit Graphics Output
Protocol frame buffer addresses. (Matt Fleming)
- Detect when the UEFI v2.5 EFI_PROPERTIES_TABLE feature is enabled
in the firmware and set an efi.flags bit so the kernel knows when
it can apply more strict runtime mapping attributes - Ard Biesheuvel
- Auto-load the efi-pstore module on EFI systems, just like we
currently do for the efivars module. (Ben Hutchings)
- Add "efi_fake_mem" kernel parameter which allows the system's EFI
memory map to be updated with additional attributes for specific
memory ranges. This is useful for testing the kernel code that handles
the EFI_MEMORY_MORE_RELIABLE memmap bit even if your firmware
doesn't include support. (Taku Izumi)
Note: there is a semantic conflict between the following two commits:
8a53554e12 ("x86/efi: Fix multiple GOP device support")
ae2ee627dc ("efifb: Add support for 64-bit frame buffer addresses")
I fixed up the interaction in the merge commit, changing the type of
current_fb_base from u32 to u64.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch introduces new boot option named "efi_fake_mem".
By specifying this parameter, you can add arbitrary attribute
to specific memory range.
This is useful for debugging of Address Range Mirroring feature.
For example, if "efi_fake_mem=2G@4G:0x10000,2G@0x10a0000000:0x10000"
is specified, the original (firmware provided) EFI memmap will be
updated so that the specified memory regions have
EFI_MEMORY_MORE_RELIABLE attribute (0x10000):
<original>
efi: mem36: [Conventional Memory| | | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x00000020a0000000) (129536MB)
<updated>
efi: mem36: [Conventional Memory| |MR| | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x0000000180000000) (2048MB)
efi: mem37: [Conventional Memory| | | | | | |WB|WT|WC|UC] range=[0x0000000180000000-0x00000010a0000000) (61952MB)
efi: mem38: [Conventional Memory| |MR| | | | |WB|WT|WC|UC] range=[0x00000010a0000000-0x0000001120000000) (2048MB)
efi: mem39: [Conventional Memory| | | | | | |WB|WT|WC|UC] range=[0x0000001120000000-0x00000020a0000000) (63488MB)
And you will find that the following message is output:
efi: Memory: 4096M/131455M mirrored memory
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
There are two kexec load syscalls, kexec_load another and kexec_file_load.
kexec_file_load has been splited as kernel/kexec_file.c. In this patch I
split kexec_load syscall code to kernel/kexec.c.
And add a new kconfig option KEXEC_CORE, so we can disable kexec_load and
use kexec_file_load only, or vice verse.
The original requirement is from Ted Ts'o, he want kexec kernel signature
being checked with CONFIG_KEXEC_VERIFY_SIG enabled. But kexec-tools use
kexec_load syscall can bypass the checking.
Vivek Goyal proposed to create a common kconfig option so user can compile
in only one syscall for loading kexec kernel. KEXEC/KEXEC_FILE selects
KEXEC_CORE so that old config files still work.
Because there's general code need CONFIG_KEXEC_CORE, so I updated all the
architecture Kconfig with a new option KEXEC_CORE, and let KEXEC selects
KEXEC_CORE in arch Kconfig. Also updated general kernel code with to
kexec_load syscall.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Petr Tesarik <ptesarik@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Josh Boyer <jwboyer@fedoraproject.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
So, I'm told this problem exists in the world:
> Subject: Build error in -next due to 'efi: Add esrt support'
>
> Building ia64:defconfig ... failed
> --------------
> Error log:
>
> drivers/firmware/efi/esrt.c:28:31: fatal error: asm/early_ioremap.h: No such file or directory
>
I'm not really sure how it's okay that we have things in asm-generic on
some platforms but not others - is having it the same everywhere not the
whole point of asm-generic?
That said, ia64 doesn't have early_ioremap.h . So instead, since it's
difficult to imagine new IA64 machines with UEFI 2.5, just don't build
this code there.
To me this looks like a workaround - doing something like:
generic-y += early_ioremap.h
in arch/ia64/include/asm/Kbuild would appear to be more correct, but
ia64 has its own early_memremap() decl in arch/ia64/include/asm/io.h ,
and it's a macro. So adding the above /and/ requiring that asm/io.h be
included /after/ asm/early_ioremap.h in all cases would fix it, but
that's pretty ugly as well. Since I'm not going to spend the rest of my
life rectifying ia64 headers vs "generic" headers that aren't generic,
it's much simpler to just not build there.
Note that I've only actually tried to build this patch on x86_64, but
esrt.o still gets built there, and that would seem to demonstrate that
the conditional building is working correctly at all the places the code
built before. I no longer have any ia64 machines handy to test that the
exclusion actually works there.
Signed-off-by: Peter Jones <pjones@redhat.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
(Compile-)Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Matt Domsch changed the dell page to point to the new upstream quite
some time ago; kernel should reflect that here as well.
Cc: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
This patch changes both x86 and arm64 efistub implementations
from #including shared .c files under drivers/firmware/efi to
building shared code as a static library.
The x86 code uses a stub built into the boot executable which
uncompresses the kernel at boot time. In this case, the library is
linked into the decompressor.
In the arm64 case, the stub is part of the kernel proper so the library
is linked into the kernel proper as well.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Ard Biesheuvel