Now that PCIe DT binding is disabled in SoC specific DTS,
we need a way to override it in a board specific DTS. So
rename the PCIe nodes accordingly.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Currently PCIe DT bindings are broken. PCIe driver can't function
without having a SerDes driver that provide the phy configuration.
On K2E EVM, this causes problem since the EVM has Marvell SATA
controller present and with default values in the SerDes register,
it seems to pass the PCIe link check, but causes issues since
the configuration is not correct. The manifestation is that when
EVM is booted with NFS rootfs, the boot hangs. We shouldn't enable
PCIe on this EVM since to work, SerDes driver has to be present as
well. So by default, the PCIe DT binding should be disabled in SoC
specific DTS. It can be enabled in the board specific DTS when the
SerDes device driver is also present.
So fix the status of PCIe DT bindings in the SoC specific DTS to
"disabled". To enable PCIe, the status should be set to "ok" in
the EVM DTS file when SerDes driver support becomes available in
the upstream tree.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
* pm-cpuidle:
suspend-to-idle: Prevent RCU from complaining about tick_freeze()
* pm-cpufreq:
cpufreq: Allow freq_table to be obtained for offline CPUs
cpufreq: Initialize the governor again while restoring policy
* acpi-resources:
ACPI / PCI: Fix regressions caused by resource_size_t overflow with 32-bit kernel
Since dm9000 driver added support for a vcc regulator, platform data
based platforms have their ethernet broken, as the regulator claiming
returns -EPROBE_DEFER and prevents dm9000 loading.
This patch fixes this for all pxa boards using dm9000, by using the
specific regulator_has_full_constraints() function.
This was discovered and tested on the cm-x300 board.
Fixes: 7994fe55a4 ("dm9000: Add regulator and reset support to dm9000")
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Something (ATOM BIOS?) seems to be clobbering the LB_INTERRUPT_MASK
register while the CRTC is off, which caused e.g. glxgears or
gnome-shell to hang after a modeset.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
So the selected forced level shows up properly in sysfs.
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is necessary to properly reset the min/max limits before
clamping them otherwise we may get improper clamping depending
on what what was the last forced level.
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Always respect the harvest configuration as is.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we run into a part with a harvest configuration where the entire
IP block is unusable, just disable the IP block.
v2: fix logic as noted by Christian
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Just to make sure userspace don't send nonsense to the kernel.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Port of amdgpu patch 9298e52f8b.
Signed-off-by: Christian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This can be the case when the GPU is powered off, e.g. via vgaswitcheroo
or runpm. When the GPU is powered up again, radeon_gart_table_vram_pin
flushes the TLB after setting rdev->gart.ptr to non-NULL.
Fixes panic on powering off R7xx GPUs.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61529
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
It is reasonable to set default timeout of request as 30 seconds instead of
30000 ticks, which may be 300 seconds if HZ is 100, for example, some arm64
based systems may choose 100 HZ.
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Fixes: c76cbbcf40 ("blk-mq: put blk_queue_rq_timeout together in blk_mq_init_queue()"
Signed-off-by: Jens Axboe <axboe@fb.com>
There is currently no way to see that the needs_check flag has been set
in the metadata. Display 'needs_check' in the cache status if it is set
in the cache metadata.
Also, update cache documentation.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
There is currently no way to see that the needs_check flag has been set
in the metadata. Display 'needs_check' in the thin-pool status if it is
set in the thinp metadata.
Also, update thinp documentation.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This fixes an issue where running out of data space would cause the
thin-pool's metadata to become read-only. There was no reason to make
metadata read-only -- calling set_pool_mode() with PM_READ_ONLY was a
misguided way to error all queued and future write IOs. We can
accomplish the same by degrading from PM_OUT_OF_DATA_SPACE to
PM_OUT_OF_DATA_SPACE with error_if_no_space enabled.
Otherwise, the use of PM_READ_ONLY could cause a race where commit() was
started before the PM_READ_ONLY transition but dm_pool_commit_metadata()
would go on to fail because the block manager had transitioned to
read-only. The return of -EPERM from dm_pool_commit_metadata(), due to
attempting to commit while in read-only mode, caused the thin-pool to
set 'needs_check' because a metadata_operation_failed(). This needless
cascade of failures makes life for users more difficult than needed.
Reported-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Commit 1e6f241604 changed the scsi sysfs 'queue_depth' code to
rejects depths higher than the scsi host template setting. But lots
of hosts set this to 1, and update the settings in the scsi host
when the controller/devices probing happens.
This breaks (at least) mpt2sas and mpt3sas runtime setting of queue
depth, returning EINVAL for all settings but '1'. And once it's set to
1, there's no way to go back up.
Cc: stable@vger.kernel.org
Fixes: 1e6f241604 "scsi: don't allow setting of queue_depth bigger than can_queue"
Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
pca953x interrupt controller functionality is implemented using
nested threaded IRQs which require parent_irq to be configured
properly otherwise below warning can be seen if IRQ core
will try re-schedule nested IRQ:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 12 at kernel/irq/manage.c:696 irq_nested_primary_handler+0x30/0x38()
Primary handler called for nested irq 301
Modules linked in: uinput ipv6 smsc95xx usbnet mii imx2_wdt etnaviv(C) matrix_keypad matrix_keymap ar1021_i2c
CPU: 1 PID: 12 Comm: ksoftirqd/1 Tainted: G WC 4.1.1 #9
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
Backtrace:
[<c0013298>] (dump_backtrace) from [<c0013488>] (show_stack+0x20/0x24)
[<c0013468>] (show_stack) from [<c05743c4>] (dump_stack+0x70/0xc0)
[<c0574354>] (dump_stack) from [<c002b7b8>] (warn_slowpath_common+0x88/0xc0)
[<c002b730>] (warn_slowpath_common) from [<c002b8ac>] (warn_slowpath_fmt+0x40/0x48)
[<c002b870>] (warn_slowpath_fmt) from [<c0075798>] (irq_nested_primary_handler+0x30/0x38)
[<c0075768>] (irq_nested_primary_handler) from [<c0075200>] (handle_irq_event_percpu+0x70/0x2d0)
[<c0075190>] (handle_irq_event_percpu) from [<c00754ac>] (handle_irq_event+0x4c/0x6c)
[<c0075460>] (handle_irq_event) from [<c0078204>] (handle_simple_irq+0xa4/0xc8)
[<c0078160>] (handle_simple_irq) from [<c0077cd4>] (resend_irqs+0x50/0x7c)
[<c0077c84>] (resend_irqs) from [<c002f99c>] (tasklet_action+0x94/0x140)
[<c002f908>] (tasklet_action) from [<c002eea8>] (__do_softirq+0xa0/0x3c8)
[<c002ee08>] (__do_softirq) from [<c002f208>] (run_ksoftirqd+0x38/0x54)
[<c002f1d0>] (run_ksoftirqd) from [<c004b1e4>] (smpboot_thread_fn+0x1f8/0x2f0)
[<c004afec>] (smpboot_thread_fn) from [<c0047744>] (kthread+0xe8/0x104)
[<c004765c>] (kthread) from [<c000fac8>] (ret_from_fork+0x14/0x2c)
---[ end trace 96052cda48865769 ]---
The issue was reported and described in details by Lothar Waßmann and
Christian Gmeiner in https://lkml.org/lkml/2014/9/9/123.
Fix it by adding missed call of gpiochip_set_chained_irqchip()
so GPIO IRQ chip helpers will set parent_irq for nested IRQs
properly.
Reported-by: Lothar Waßmann <LW@KARO-electronics.de>
Tested-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
OMAP GPIO driver allowed to be built as loadable module, but it
doesn't set owner field in GPIO chip structure. As result,
module_get/put() API is not working and it's possible to unload
OMAP driver while in use:
omap_gpio 48051000.gpio: REMOVING GPIOCHIP WITH GPIOS STILL REQUESTED
Hence, add missing configuration.
Cc: Tony Lindgren <tony@atomide.com>
Fixes: cac089f902 ('gpio: omap: Allow building as a loadable module')
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In case the gpiochip doesn't have the .dev field set, as is the case
in here, it is not possible to reference this device in DT as a GPIO
controller. A good example of this problem is that gpio-leds can not
be used when connected to this chip, the gpio-leds driver bails out
with -EPROBE_DEFER.
Fix this problem by setting the .dev field of the gpio_chip to the
parent i2c device.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Mans Rullgard <mans@mansr.com>
Cc: Olaf Mandel <o.mandel@menlosystems.com>
Cc: Semen Protsenko <semen.protsenko@globallogic.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
xgpio_save_regs() is used in this driver to setup the initial
values of the registers in the hardware.
The relevant registers at that time are:
0x0 -> channel 0 data (32 bits, one for each GPIO on this channel).
0x4 -> channel 0 tri, controls in/out status for each GPIO of this channel.
0x8 -> channel 1 data
0xC -> channel 1 tri
gpio-xilinx.c defines these:
XGPIO_DATA_OFFSET (0x0)
XGPIO_TRI_OFFSET (0x4)
XGPIO_CHANNEL_OFFSET 0x8
Before this patch, the "data" register value of channel 1 was written
at 0x4 intead of 0x8 (overwriting the channel 0 "tri" register),
and the "tri" register value for channel 1 was written at 0x8 instead of 0xC.
Signed-off-by: Raphaël Teysseyre <rteysseyre@gmail.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This laptop needs GPIO4 pulled high to enable the headphone amplifier,
and has a mute LED on GPIO3. I modelled the patch on the existing
GPIO4 code which pulls the line low for the same purpose; this time,
the HP amp line is pulled high.
v2: Disable the headphone amplifier when no headphone is connected.
Don't disable power savings to preserve the LED state.
v3: Remove headset-specific hooks and code; this is just a headphone.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull TPM bugfixes from James Morris.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
tpm, tpm_crb: fail when TPM2 ACPI table contents look corrupted
tpm: Fix initialization of the cdev
- Mainly fix-ups for the various 4.2 items
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=N/5G
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"Mainly fix-ups for the various 4.2 items"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (24 commits)
IB/core: Destroy ocrdma_dev_id IDR on module exit
IB/core: Destroy multcast_idr on module exit
IB/mlx4: Optimize do_slave_init
IB/mlx4: Fix memory leak in do_slave_init
IB/mlx4: Optimize freeing of items on error unwind
IB/mlx4: Fix use of flow-counters for process_mad
IB/ipath: Convert use of __constant_<foo> to <foo>
IB/ipoib: Set MTU to max allowed by mode when mode changes
IB/ipoib: Scatter-Gather support in connected mode
IB/ucm: Fix bitmap wrap when devnum > IB_UCM_MAX_DEVICES
IB/ipoib: Prevent lockdep warning in __ipoib_ib_dev_flush
IB/ucma: Fix lockdep warning in ucma_lock_files
rds: rds_ib_device.refcount overflow
RDMA/nes: Fix for incorrect recording of the MAC address
RDMA/nes: Fix for resolving the neigh
RDMA/core: Fixes for port mapper client registration
IB/IPoIB: Fix bad error flow in ipoib_add_port()
IB/mlx4: Do not attemp to report HCA clock offset on VFs
IB/cm: Do not queue work to a device that's going away
IB/srp: Avoid using uninitialized variable
...
If a failure occurs during probe, brcmstb_gpio_remove() is called. In
remove, we call platform_get_drvdata(), but at the time of failure in
the probe the driver data hadn't yet been set which leads to a NULL
ptr dereference in the remove's list_for_each. Call
platform_set_drvdata() and set up list head right after allocating the
priv struct to both avoid the null pointer dereference that could
occur today. To guard against potential future changes, check for
null pointer in remove.
Reported-by: Tim Ross <tross@broadcom.com>
Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch has the driver automatically reread partitions if a namespace
has a separate metadata format. Previously revalidating a disk was
sufficient to get the correct capacity set on such formatted drives,
but partitions that may exist would not have been surfaced.
Reported-by: Paul Grabinar <paul.grabinar@ranbarg.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Tested-by: Paul Grabinar <paul.grabinar@ranbarg.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=aj6S
-----END PGP SIGNATURE-----
Merge tag 'locks-v4.2-1' of git://git.samba.org/jlayton/linux
Pull file locking updates from Jeff Layton:
"I had thought that I was going to get away without a pull request this
cycle. There was a NFSv4 file locking problem that cropped up that I
tried to fix in the NFSv4 code alone, but that fix has turned out to
be problematic. These patches fix this in the correct way.
Note that this touches some NFSv4 code as well. Ordinarily I'd wait
for Trond to ACK this, but he's on holiday right now and the bug is
rather nasty. So I suggest we merge this and if he raises issues with
it we can sort it out when he gets back"
Acked-by: Bruce Fields <bfields@fieldses.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
[ +1 to this series fixing a 100% reproducible slab corruption +
general protection fault in my nfs-root test environment. - Dan ]
Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* tag 'locks-v4.2-1' of git://git.samba.org/jlayton/linux:
locks: inline posix_lock_file_wait and flock_lock_file_wait
nfs4: have do_vfs_lock take an inode pointer
locks: new helpers - flock_lock_inode_wait and posix_lock_inode_wait
locks: have flock_lock_file take an inode pointer instead of a filp
Revert "nfs: take extra reference to fl->fl_file when running a LOCKU operation"
- Makefile changes (top-level+ARC) reinstates -O3 builds (regression since 3.16)
- IDU intc related fixes, IRQ affinity
- patch to make bitops safer for ARC
- perf fix from Alexey to remove signed PC braino
- Futex backend gets llock/scond support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CWXf
-----END PGP SIGNATURE-----
Merge tag 'arc-v4.2-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- Makefile changes (top-level+ARC) reinstates -O3 builds (regression
since 3.16)
- IDU intc related fixes, IRQ affinity
- patch to make bitops safer for ARC
- perf fix from Alexey to remove signed PC braino
- Futex backend gets llock/scond support
* tag 'arc-v4.2-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARCv2: support HS38 releases
ARC: make sure instruction_pointer() returns unsigned value
ARC: slightly refactor macros for boot logging
ARC: Add llock/scond to futex backend
arc:irqchip: prepare for drivers/irqchip/irqchip.h removal
ARC: Make ARC bitops "safer" (add anti-optimization)
ARCv2: [axs103] bump CPU frequency from 75 to 90 MHZ
ARCv2: intc: IDU: Fix potential race in installing a chained IRQ handler
ARCv2: intc: IDU: support irq affinity
ARC: fix unused var wanring
ARC: Don't memzero twice in dma_alloc_coherent for __GFP_ZERO
ARC: Override toplevel default -O2 with -O3
kbuild: Allow arch Makefiles to override {cpp,ld,c}flags
ARCv2: guard SLC DMA ops with spinlock
ARC: Kconfig: better way to disable ARC_HAS_LLSC for ARC_CPU_750D
Pull s390 fixes from Martin Schwidefsky:
"One improvement for the zcrypt driver, the quality attribute for the
hwrng device has been missing. Without it the kernel entropy seeding
will not happen automatically.
And six bug fixes, the most important one is the fix for the vector
register corruption due to machine checks"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/nmi: fix vector register corruption
s390/process: fix sfpc inline assembly
s390/dasd: fix kernel panic when alias is set offline
s390/sclp: clear upper register halves in _sclp_print_early
s390/oprofile: fix compile error
s390/sclp: fix compile error
s390/zcrypt: enable s390 hwrng to seed kernel entropy
The end of jfs_rename(), which is also used by the error paths,
included a call to IWRITE_UNLOCK(new_ip) after labels out1, out2
and out3. If we come in through these labels, IWRITE_LOCK() has not
been called yet.
In moving that call to the correct spot, I also moved some
exceptional truncate code earlier as well, since the early error
paths don't need to deal with it, and I renamed out4: to out_tx: so
a future patch by Jan Kara doesn't need to deal with renumbering or
confusing out-of-order labels.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=TcF6
-----END PGP SIGNATURE-----
Merge tag 'module-final-v4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
Pull final init.h/module.h code relocation from Paul Gortmaker:
"With the release of 4.2-rc2 done, we should not be seeing any new code
added that gets upset by this small code move, and we've banked yet
another complete week of testing with this move in place on top of
4.2-rc1 via linux-next to ensure that remained true.
Given that, I'd like to put it in now so that people formulating new
work for 4.3-rc1 will be exposed to the ever so slightly stricter (but
sensible) requirements wrt. whether they are needing init.h vs.
module.h macros, even if they are not using linux-next.
The diffstat of the move is slightly asymmetrical due to needing to
leave behind a couple #ifdef in the old location and add the same ones
to the new location, but other than that, it is a 1:1 move, complete
with the module_init/exit trailing semicolon that we can't fix. That
is, until/unless someone does a tree-wide sed fix of all the
approximately 800 currently in tree users relying on it"
* tag 'module-final-v4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
module: relocate module_init from init.h to module.h
tracer (traces unlikely and likely branches) when enabled with certain
debug options.
What happened was that various debug options like lockdep and DEBUG_PREEMPT
can cause parts of the branch tracer to recurse outside its recursion
protection. In fact, part of its recursion protection used these features
that caused the lockup. This cleans up the code a little and makes the
recursion protection a bit more robust.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVovjwAAoJEEjnJuOKh9ldYacH/3VVIcBhRbuUmANZJSYLXSUh
nEx6FOAfmla/7hH2dVSm8JmnbUzWyunttjbZ6/O8PFE1gumuvVrfWrIV8iwUe4J6
6Z2KdbKd+3FpaSKEnX61UQ1cfR+1eFLOLH9CH5O4twVPyLzvI+NpaJQJaNoX0ywq
vqsUMx63gKdGwhC6BhLi0t/xsTuuIgGjDAjuaF2yNZCuBw9UtziedxK5pveH2OFX
G8dAVfP18aqsXaRMj1LUrm6wRUP0BD7B2v99jdUu2UHYTtmBzy8Vm6RfhJ4Gk8d7
WnIkaBBU5iu75E9ec35MtA52zQ+8b8O/fpIQZgJgFRr7uaf+hvbXjF0UScWE6vU=
=ujzT
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.2-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Fengguang Wu discovered a crash that happened to be because of the
branch tracer (traces unlikely and likely branches) when enabled with
certain debug options.
What happened was that various debug options like lockdep and
DEBUG_PREEMPT can cause parts of the branch tracer to recurse outside
its recursion protection. In fact, part of its recursion protection
used these features that caused the lockup. This cleans up the code a
little and makes the recursion protection a bit more robust"
* tag 'trace-v4.2-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Have branch tracer use recursive field of task struct
We're not supposed to store the adjusted mode into crtc->mode. We don't
use it anyway, so we can safely remove this.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Fix the start address calculation when overlay is partially off screen.
fb->bits_per_pixel is not set for YUV formats, and is always zero, which
led to the first component always starting at zero.
Use drm_format_plane_cpp() instead.
This also revealed a problem in that YUYV formats toggle the U/V data
for odd pixel start address offsets. We try to rectify that by
toggling the U/V swap, which for the most part works, but seemingly
introduces a flicker for one scan frame of swapped U/V.
However, these changes result in an overall improvement.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Use drm_plane_helper_check_update() rather than our own code to validate
and limit the size of the displayed image. As we are able to support
scaling, permit the full scaling ability.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Fix the gem object freeing after a partial import of a dma buffer,
eg, one which has been imported, but not mapped. This was provoking
a warning from the dma_buf code.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The Armada overlay plane wasn't being properly cleaned up as it was
missing a call to drm_plane_cleanup(). It also wasn't freeing the
right type of pointer (although we were still freeing the right
pointer value.)
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Nothing was waking up the overlay plane wait queue, so we were fully
reliant on the HZ/25 wait timing out to make progress. Fix the lack
of wake-up.
We were also mis-handling the wait_event_timeout() return value - this
returns an unsigned integer of the remaining time, or zero on timeout
and the condition evaluated false. Checking this for less than zero
is not sane.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Commit 5ef7bbb09f ("perf tools: Allow to specify custom linker
command") was meant to enable usage non $(CROSS_COMPILE)ld linker during
perf building.
But implementation didn't take into account the fact that LD is a
pre-defined variable in GNU Make. I.e. it is always defined.
Which means there's no point to check "LD ?= ..." because it will never
succeed.
And so LD will be either that explicitly passed to make like this:
------->8-------
make LD=path_to_my_ld ...
------->8-------
or default value, which is host's "ld".
Latter leads to failure of cross-linkage because instead of cross linker
"$(CROSS_COMPILE)ld" host's "ld" is used.
Fortunately there's a way to do correct substitution of $(CROSS_COMPILE)ld
with user defined LD on command-line.
As a reference was used implementation in "tools/lib/traceevent/Makefile".
Build tested for x86_64 and ARC.
Thanks Jiri for this hint.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Fixes: 5ef7bbb09f ("perf tools: Allow to specify custom linker command")
Cc: Aaro Koskinen <aaro.koskinen@nokia.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/1436864720-26316-1-git-send-email-abrodkin@synopsys.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the checking for HAVE_SYNC_COMPARE_AND_SWAP_SUPPORT for AUX area mmaps
until after checking if such mmaps are used anyway.
Reported-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/55A5023C.7020907@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Murali Karicheri