Modern device tree bindings are supposed to be created as YAML-files
in accordance with dt-schema. This commit replaces two DW SPI legacy
bare text bindings with YAML file. As before the bindings file states
that the corresponding dts node is supposed to be compatible either
with generic DW APB SSI controller or with Microsemi/Amazon/Renesas/Intel
vendors-specific controllers, to have registers, interrupts and clocks
properties. Though in case of Microsemi version of the controller
there must be two registers resources specified. Properties like
clock-names, reg-io-width, cs-gpio, num-cs, DMA and slave device
sub-nodes are optional.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@vger.kernel.org
Link: https://lore.kernel.org/r/20200529182544.9807-1-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Silex Insight is a microelectronic company whose headquarter is located
in Belgium.
Web site of the company: https://www.silexinsight.com/
Signed-off-by: Olivier Sobrie <olivier.sobrie@silexinsight.com>
Signed-off-by: Rob Herring <robh@kernel.org>
A test with the command below gives this error:
arch/arm/boot/dts/rk3188-bqedison2qc.dt.yaml:
touchscreen@3e: reg:0:0: 56 was expected
The touchscreen chip on 'rk3188-bqedison2qc' and other BQ models
was shipped with different addresses then the binding currently allows.
Change the reg property that any address will pass.
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/input/touchscreen/
edt-ft5x06.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Add documentation for the interconnects and interconnect-names
properties for USB.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Fix dt-binding-check issue
ti,gpi-config:0:0: 4 is greater than the maximum of 1
ti,gpi-config:0:1: 5 is greater than the maximum of 1
ti,gpi-config:0:2: 6 is greater than the maximum of 1
ti,gpi-config:0:3: 7 is greater than the maximum of 1
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200528144711.18065-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This series of uart controllers is able to work in IrDA mode.
This adds a property to the device tree to enable that feature on
selected ports if needed.
Signed-off-by: Pascal Huerst <pascal.huerst@gmail.com>
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200529055058.1606910-2-daniel@zonque.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit e8759ad17d ("serial: uapi: Add support for bus termination")
introduced the ability to enable rs485 bus termination from user space.
So far the feature is only used by a single driver, 8250_exar.c, using a
hardcoded GPIO pin specific to Siemens IOT2040 products.
Provide for a more generic solution by allowing specification of an
rs485 bus termination GPIO pin in the device tree. An upcoming commit
implements support for this pin for any 8250 driver. The binding is
used in device trees of the "Revolution Pi" PLCs offered by KUNBUS.
[Heiko Stuebner converted the binding to YAML, hence his Signed-off-by.]
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/4f4411895dc52c846f766e7f7207ec412c4811b6.1589811297.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit cd4b54e2ae as the
change should be coming in through Rob's tree instead.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sandeep Maheswaram <sanm@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit b88035625e as the file
should be coming in through Rob's tree instead.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sandeep Maheswaram <sanm@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 1805cdde37 as it
should be going in through Rob's tree instead to resolve conflicts.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Rob Herring <robh@kernel.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Sandeep Maheswaram <sanm@codeaurora.org>
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the Renesas Multi-Function Timer Pulse Unit 2 (MTU2) Device Tree
binding documentation to json-schema.
Add missing properties.
Update the example to match reality.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX1 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX21 clock binding to DT schema format using json-schema,
can NOT find any CCM interrupt info from reference manual and DT file,
so interrupts property is removed from original binding doc.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX25 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX27 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX23 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX28 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX31 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX35 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX5 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Converts documentation from txt format to yaml.
Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Document r8a7742 xhci support. The driver will use the fallback
compatible string "renesas,rcar-gen2-xhci", therefore no driver
change is needed.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Add USB PHY support for r8a7742 SoC. Renesas RZ/G1H (R8A7742)
USB PHY is identical to the R-Car Gen2 family.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
The binding example is missing the fallback compatible.
This is needed as the driver only matches against mt6577.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Rob Herring <robh@kernel.org>
A straightforward conversion of the ehci-mv binding to DT schema format
using json-schema.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
[robh: add unevaluatedProperties]
Signed-off-by: Rob Herring <robh@kernel.org>
A straightforward conversion of the the spi-pxa2xx binding to DT schema
format using json-schema.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
[robh: add unevaluatedProperties]
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the marvell,mmp2-ccic binding to DT schema format using
json-schema. While at that this drops the "func" and "phy" clocks.
The driver consumes clocks with those names, but it's not clear
what are they for and they are not used in DT systems. "phy" is
probably a clock for the sensor and it would belong in the sensor
node.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
[robh: add additionalProperties]
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX thermal binding to DT schema format using json-schema
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the ingenic,jz4780-nand.txt doc file to ingenic,nand.yaml.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the ingenic,jz4780-nemc.txt doc file to ingenic,nemc.yaml.
The ingenic,jz4725b-nemc compatible string was added in the process,
with a fallback to ingenic,jz4740-nemc.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the MXS GPIO binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Document Device Tree bindings for the Renesas EMMA Mobile UART
Interface.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the Renesas DDR Bus Controller Device Tree binding documentation
to json-schema.
Drop referrals to driver behavior.
Make power-domains required, as it is present for all current users.
Update the example to match reality.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
A generic GIC block embedded in an SoC may be connected to an on-SoC
reset controller. Hence allow the DTS writer to describe this relation,
by documenting the optional presence of a "reset" property.
This gets rid of "make dtbs_check" warnings like:
arch/arm/boot/dts/r8a7791-porter.dt.yaml: interrupt-controller@f1001000: 'resets' does not match any of the regexes: '^v2m@[0-9a-f]+$', 'pinctrl-[0-9]+'
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
make dtbs_check:
arch/arm/boot/dts/r8a7740-armadillo800eva.dt.yaml: sound@fe1f0000: '#sound-dai-cells', 'clocks', 'power-domains' do not match any of the regexes: 'pinctrl-[0-9]+'
Fix this by documenting the missing properties.
Update the example to match reality.
While at it, improve the document title, and comment the various
compatible values with the corresponding SoC names.
Fixes: 2f52475bac ("ASoC: fsi: switch to yaml base Documentation")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
make dtbs_check:
arch/arm/boot/dts/r7s72100-rskrza1.dt.yaml: rtc@fcff1000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
Fix this by documenting the missing power-domains property.
Update the example to match reality.
Fixes: 7ae8b2f5df ("dt-bindings: rtc: rtc-sh: convert bindings to json-schema")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
make dtbs_check:
arch/arm/boot/dts/r7s72100-genmai.dt.yaml: camera@e8210000: 'clocks', 'power-domains' do not match any of the regexes: 'pinctrl-[0-9]+'
Fix this by documenting the missing properties.
Update the example to match reality.
Fixes: 58361eaa11 ("dt-bindings: media: renesas,ceu: Convert to yaml")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX SYSCTR binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX TPM binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
MikroTik (SIA Mikrotīkls) is a Latvian company who develop routers and
wireless ISP systems.
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX7D clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX IRQSTEER binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
These are mainly fixups for comments that collided with me
already merging v3 of the series, and one patch that I had forgotten
to pick up.
* baikal/drivers:
bus: bt1-axi: Build the driver into the kernel
bus: bt1-apb: Build the driver into the kernel
bus: bt1-axi: Use sysfs_streq instead of strncmp
bus: bt1-axi: Optimize the return points in the driver
bus: bt1-apb: Use sysfs_streq instead of strncmp
bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method
bus: bt1-apb: Fix show/store callback identations
bus: bt1-apb: Include linux/io.h
dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas RZ/G1H (R8A7742) SoC GPIO blocks are identical to the R-Car Gen2
family. Add support for its GPIO controllers.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Document SATA support for the RZ/G1H, which is compatible with
R-Car Gen2 SoC family.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
The conversion to json-schema accidentally retained some SoC part
numbers in comments for compatible values. Drop them, as they're part
of the compatible values anyway.
Fixes: 384d00fae8 ("dt-bindings: serial: sh-sci: Convert to json-schema")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
RZ/G1H (R8A7742) SoC also has the R-Car gen2 compatible SCIFA ports,
so document the SoC specific bindings.
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Add a helper to directly set the RXRPC_MIN_SECURITY_LEVEL sockopt from
kernel space without going through a fake uaccess.
Thanks to David Howells for the documentation updates.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support for Branch Target Identification (BTI) in user and kernel
(Mark Brown and others)
* for-next/bti: (39 commits)
arm64: vdso: Fix CFI directives in sigreturn trampoline
arm64: vdso: Don't prefix sigreturn trampoline with a BTI C instruction
arm64: bti: Fix support for userspace only BTI
arm64: kconfig: Update and comment GCC version check for kernel BTI
arm64: vdso: Map the vDSO text with guarded pages when built for BTI
arm64: vdso: Force the vDSO to be linked as BTI when built for BTI
arm64: vdso: Annotate for BTI
arm64: asm: Provide a mechanism for generating ELF note for BTI
arm64: bti: Provide Kconfig for kernel mode BTI
arm64: mm: Mark executable text as guarded pages
arm64: bpf: Annotate JITed code for BTI
arm64: Set GP bit in kernel page tables to enable BTI for the kernel
arm64: asm: Override SYM_FUNC_START when building the kernel with BTI
arm64: bti: Support building kernel C code using BTI
arm64: Document why we enable PAC support for leaf functions
arm64: insn: Report PAC and BTI instructions as skippable
arm64: insn: Don't assume unrecognized HINTs are skippable
arm64: insn: Provide a better name for aarch64_insn_is_nop()
arm64: insn: Add constants for new HINT instruction decode
arm64: Disable old style assembly annotations
...
ACPI and IORT updates
(Lorenzo Pieralisi)
* for-next/acpi:
ACPI/IORT: Remove the unused __get_pci_rid()
ACPI/IORT: Fix PMCG node single ID mapping handling
ACPI: IORT: Add comments for not calling acpi_put_table()
ACPI: GTDT: Put GTDT table after parsing
ACPI: IORT: Add extra message "applying workaround" for off-by-1 issue
ACPI/IORT: work around num_ids ambiguity
Revert "ACPI/IORT: Fix 'Number of IDs' handling in iort_id_map()"
ACPI/IORT: take _DMA methods into account for named components
BPF JIT optimisations for immediate value generation
(Luke Nelson)
* for-next/bpf:
bpf, arm64: Optimize ADD,SUB,JMP BPF_K using arm64 add/sub immediates
bpf, arm64: Optimize AND,OR,XOR,JSET BPF_K using arm64 logical immediates
arm64: insn: Fix two bugs in encoding 32-bit logical immediates
Addition of new CPU ID register fields and removal of some benign sanity checks
(Anshuman Khandual and others)
* for-next/cpufeature: (27 commits)
KVM: arm64: Check advertised Stage-2 page size capability
arm64/cpufeature: Add get_arm64_ftr_reg_nowarn()
arm64/cpuinfo: Add ID_MMFR4_EL1 into the cpuinfo_arm64 context
arm64/cpufeature: Add remaining feature bits in ID_AA64PFR1 register
arm64/cpufeature: Add remaining feature bits in ID_AA64PFR0 register
arm64/cpufeature: Add remaining feature bits in ID_AA64ISAR0 register
arm64/cpufeature: Add remaining feature bits in ID_MMFR4 register
arm64/cpufeature: Add remaining feature bits in ID_PFR0 register
arm64/cpufeature: Introduce ID_MMFR5 CPU register
arm64/cpufeature: Introduce ID_DFR1 CPU register
arm64/cpufeature: Introduce ID_PFR2 CPU register
arm64/cpufeature: Make doublelock a signed feature in ID_AA64DFR0
arm64/cpufeature: Drop TraceFilt feature exposure from ID_DFR0 register
arm64/cpufeature: Add explicit ftr_id_isar0[] for ID_ISAR0 register
arm64/cpufeature: Drop open encodings while extracting parange
arm64/cpufeature: Validate hypervisor capabilities during CPU hotplug
arm64: cpufeature: Group indexed system register definitions by name
arm64: cpufeature: Extend comment to describe absence of field info
arm64: drop duplicate definitions of ID_AA64MMFR0_TGRAN constants
arm64: cpufeature: Add an overview comment for the cpufeature framework
...
Minor documentation tweaks for silicon errata and booting requirements
(Rob Herring and Will Deacon)
* for-next/docs:
arm64: silicon-errata.rst: Sort the Cortex-A55 entries
arm64: docs: Mandate that the I-cache doesn't hold stale kernel text
Minor Kconfig cleanups
(Geert Uytterhoeven)
* for-next/kconfig:
arm64: cpufeature: Add "or" to mitigations for multiple errata
arm64: Sort vendor-specific errata
Miscellaneous updates
(Ard Biesheuvel and others)
* for-next/misc:
arm64: mm: Add asid_gen_match() helper
arm64: stacktrace: Factor out some common code into on_stack()
arm64: Call debug_traps_init() from trap_init() to help early kgdb
arm64: cacheflush: Fix KGDB trap detection
arm64/cpuinfo: Move device_initcall() near cpuinfo_regs_init()
arm64: kexec_file: print appropriate variable
arm: mm: use __pfn_to_section() to get mem_section
arm64: Reorder the macro arguments in the copy routines
efi/libstub/arm64: align PE/COFF sections to segment alignment
KVM: arm64: Drop PTE_S2_MEMATTR_MASK
arm64/kernel: Fix range on invalidating dcache for boot page tables
arm64: set TEXT_OFFSET to 0x0 in preparation for removing it entirely
arm64: lib: Consistently enable crc32 extension
arm64/mm: Use phys_to_page() to access pgtable memory
arm64: smp: Make cpus_stuck_in_kernel static
arm64: entry: remove unneeded semicolon in el1_sync_handler()
arm64/kernel: vmlinux.lds: drop redundant discard/keep macros
arm64: drop GZFLAGS definition and export
arm64: kexec_file: Avoid temp buffer for RNG seed
arm64: rename stext to primary_entry
Perf PMU driver updates
(Tang Bin and others)
* for-next/perf:
pmu/smmuv3: Clear IRQ affinity hint on device removal
drivers/perf: hisi: Permit modular builds of HiSilicon uncore drivers
drivers/perf: hisi: Fix typo in events attribute array
drivers/perf: arm_spe_pmu: Avoid duplicate printouts
drivers/perf: arm_dsu_pmu: Avoid duplicate printouts
Pointer authentication updates and support for vmcoreinfo
(Amit Daniel Kachhap and Mark Rutland)
* for-next/ptr-auth:
Documentation/vmcoreinfo: Add documentation for 'KERNELPACMASK'
arm64/crash_core: Export KERNELPACMASK in vmcoreinfo
arm64: simplify ptrauth initialization
arm64: remove ptrauth_keys_install_kernel sync arg
SDEI cleanup and non-critical fixes
(James Morse and others)
* for-next/sdei:
firmware: arm_sdei: Document the motivation behind these set_fs() calls
firmware: arm_sdei: remove unused interfaces
firmware: arm_sdei: Put the SDEI table after using it
firmware: arm_sdei: Drop check for /firmware/ node and always register driver
SMCCC updates and refactoring
(Sudeep Holla)
* for-next/smccc:
firmware: smccc: Fix missing prototype warning for arm_smccc_version_init
firmware: smccc: Add function to fetch SMCCC version
firmware: smccc: Refactor SMCCC specific bits into separate file
firmware: smccc: Drop smccc_version enum and use ARM_SMCCC_VERSION_1_x instead
firmware: smccc: Add the definition for SMCCCv1.2 version/error codes
firmware: smccc: Update link to latest SMCCC specification
firmware: smccc: Add HAVE_ARM_SMCCC_DISCOVERY to identify SMCCC v1.1 and above
vDSO cleanup and non-critical fixes
(Mark Rutland and Vincenzo Frascino)
* for-next/vdso:
arm64: vdso: Add --eh-frame-hdr to ldflags
arm64: vdso: use consistent 'map' nomenclature
arm64: vdso: use consistent 'abi' nomenclature
arm64: vdso: simplify arch_vdso_type ifdeffery
arm64: vdso: remove aarch32_vdso_pages[]
arm64: vdso: Add '-Bsymbolic' to ldflags
Add DT bindings for PCIe controller implemented in UniPhier SoCs
when configured in endpoint mode. This controller is based on
the DesignWare PCIe core.
Link: https://lore.kernel.org/r/1589457801-12796-2-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
AMD's next generation of EPYC processors support the MPK (Memory
Protection Keys) feature. Update the dependency and documentation.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/159068199556.26992.17733929401377275140.stgit@naples-babu.amd.com
Convert the mxs pwm binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the Hitachi HD44780 Character LCD Controller Device Tree binding
documentation to json-schema.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Rob Herring <robh@kernel.org>
This converts the Analogix ANX7814 bridge DT binding to yaml. Port
definitions and descriptions were expanded, apart from that it's a
direct translation from the original binding.
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Baikal-T1 SoC provides an embedded process, voltage and temperature
sensor to monitor an internal SoC environment (chip temperature, supply
voltage and process monitor) and on time detect critical situations,
which may cause the system instability and even damages. The IP-block
is based on the Analog Bits PVT sensor, but is equipped with a
dedicated control wrapper, which provides a MMIO registers-based access
to the sensor core functionality (APB3-bus based) and exposes an
additional functions like thresholds/data ready interrupts, its status
and masks, measurements timeout. All of these is used to create a hwmon
driver being added to the kernel by this commit.
The driver implements support for the hardware monitoring capabilities
of Baikal-T1 process, voltage and temperature sensors. PVT IP-core
consists of one temperature and four voltage sensors, each of which is
implemented as a dedicated hwmon channel config.
The driver can optionally provide the hwmon alarms for each sensor the
PVT controller supports. The alarms functionality is made compile-time
configurable due to the hardware interface implementation peculiarity,
which is connected with an ability to convert data from only one sensor
at a time. Additional limitation is that the controller performs the
thresholds checking synchronously with the data conversion procedure.
Due to these limitations in order to have the hwmon alarms
automatically detected the driver code must switch from one sensor to
another, read converted data and manually check the threshold status
bits. Depending on the measurements timeout settings this design may
cause additional burden on the system performance. By default if the
alarms kernel config is disabled the data conversion is performed by
the driver on demand when read operation is requested via corresponding
_input-file.
Co-developed-by: Maxim Kaurkin <maxim.kaurkin@baikalelectronics.ru>
Signed-off-by: Maxim Kaurkin <maxim.kaurkin@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Baikal-T1 SoC is equipped with an embedded process, voltage and
temperature sensor to monitor the chip internal environment like
temperature, supply voltage and transistors performance.
This bindings describes the external Baikal-T1 PVT control interfaces
like MMIO registers space, interrupt request number and clocks source.
These are then used by the corresponding hwmon device driver to
implement the sysfs files-based access to the sensors functionality.
Co-developed-by: Maxim Kaurkin <maxim.kaurkin@baikalelectronics.ru>
Signed-off-by: Maxim Kaurkin <maxim.kaurkin@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
There is a single register provided by the SoC system controller,
which can be used to tune the L2-cache RAM up. It only provides a way
to change the L2-RAM access latencies. So aside from "be,bt1-l2-ctl"
compatible string the device node can be optionally equipped with the
properties of Tag/Data/WS latencies.
Link: https://lore.kernel.org/r/20200526125928.17096-4-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Olof Johansson <olof@lixom.net>
Cc: linux-mips@vger.kernel.org
Cc: soc@kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Currently, the root cgroup does not have a cpu.stat file. Add one which
is consistent with /proc/stat to capture global cpu statistics that
might not fall under cgroup accounting.
We haven't done this in the past because the data are already presented
in /proc/stat and we didn't want to add overhead from collecting root
cgroup stats when cgroups are configured, but no cgroups have been
created.
By keeping the data consistent with /proc/stat, I think we avoid the
first problem, while improving the usability of cgroups stats.
We avoid the second problem by computing the contents of cpu.stat from
existing data collected for /proc/stat anyway.
Signed-off-by: Boris Burkov <boris@bur.io>
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add documentation for the following sysfs files:
/sys/devices/hv_24x7/interface/chipspersocket,
/sys/devices/hv_24x7/interface/sockets,
/sys/devices/hv_24x7/interface/coresperchip
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525104308.9814-5-kjain@linux.ibm.com
The latest Xilinx design tools called ISE and EDK has been released in
October 2013. New tool doesn't support any PPC405/PPC440 new designs.
These platforms are no longer supported and tested.
PowerPC 405/440 port is orphan from 2013 by
commit cdeb89943b ("MAINTAINERS: Fix incorrect status tag") and
commit 19624236cc ("MAINTAINERS: Update Grant's email address and maintainership")
that's why it is time to remove the support fot these platforms.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8c593895e2cb57d232d85ce4d8c3a1aa7f0869cc.1590079968.git.christophe.leroy@csgroup.eu
[arnd: This is a patch series from Serge Semin to add a few drivers
that don't have any other subsystem maintainer tree to go through,
so I'm picking them up through the soc tree, full series description
from the mailing list below]
Baikal-T1 SoC CPU is based on two MIPS Warrior P5600 cores. Their main
memory Non-Coherent IO interface is connected to the OCP2AXI bridge,
which in turn is then connected to the DW AMBA 3 AXI Interconnect (so
called Main Interconnect) with nine masters and four slaves ports. Main
Interconnect is responsible for the AXI-bus traffic arbitration (QoS)
and its routing from one component to another. In addition there is
a Errors Handler Block (EHB) accesible by means of the Baikal-T1 SoC
System Controller responsible to detect AXI protocol errors and device
not responding situations built on top the interconnect. Baikal-T1 AXI-bus
driver included in this patchset will be responsible for working with that
functionality, though currently it doesn't support QoS tuning. Instead
it's capable of detecting the error events, reporting an info about
them to the system log, injecting artificial errors to test the driver
functionality. Since AXI Interconnect doesn't provide a way to find
out which devices are connected to it, so its DT node is supposed to
be compatible with "simple-bus" driver, while sub-nodes shall represent
the masters attached to the bus.
One of the AXI Interconnect slaves is an AXI-APB bridge used to access the
Baikal-T1 SoC subsystems CSRs. MMIO request from CPU and DMAC masters are
routed there if they are detected to be within [0x08000000 0x1FFFFFFF]
range of the physical memory. In case if an attempted APB transaction
stays with no response for a pre-defined time it will be detected by
the APB-bus Errors Handler Block (EHB), which will raise an interrupt,
then the bus gets freed for a next operation. The APB-bus driver provides
the interrupt handler to detect the erroneous address, update an errors
counter and prints an error message about the faulty address. The counter
and the APB-bus operations timeout can be accessed via corresponding sysfs
nodes. A dedicated sysfs-node can be also used to artificially cause the
bus errors described above. Since APB-bus is a platform bus, it doesn't
provide a way to detect slave devices connected to it, so similarly to
the AXI-bus it's also supposed to be compatible with "simple-bus" driver.
Aside from PCIe/SATA/DDR/I2C/EHB/CPU/reboot specific settings the
Baikal-T1 System Controller provides a MIPS P5600 CM2 L2-cache tuning
block. It is responsible for the setting up the Tag/Data/WS L2-to-RAM
latencies. The last small patch in this patchset provides a driver and
DT-schema-based binding for the described device. So that the latencies
can be tuned up by means of dedicated DT properties and sysfs nodes.
This patchset is rebased and tested on the mainline Linux kernel
5.7-rc4.
Changelog v2 (AXI/APB bus):
- Assign dual GPL/BSD licenses to the bindings.
- Use single lined copyright headers in the bindings.
- Replace "additionalProperties: false" property with
"unevaluatedProperties: false" in the bindings.
- Don't use a multi-arg clock phandle reference in DT binding examples.
Thus remove includes from there.
- Fix some commit message and Kconfig help text spelling.
- Move drivers from soc to the bus subsystem.
- Convert a simple EHB drivers to the Baikal-T1 AXI and APB bus ones.
- Convert APB bus driver to using regmap MMIO API.
- Use syscon regmap to access the AXI-bus erroneous address.
- Add reset line support.
- Add Main Interconnect clock support to the AXI-bus driver.
- Remove probe-status info string printout.
- Discard of_match_ptr() macro utilization.
- Don't print error-message if no platform IRQ found. Just return an
error.
- Use generic FIELD_{GET,PREP} macros instead of handwritten ones in the
AXI-bus driver.
Changelog v2 (l2 driver):
- Fix some commit message and Kconfig help text spelling.
- Move the driver to the memory subsystem.
- Assign dual GPL/BSD license to the DT binding.
- Use single lined copyright header in the binding.
- Discard reg property and syscon compatible string.
- Move "allOf" restrictions to the root level of the properties.
- The DT node is supposed to be a child of the Baikal-T1 system
controller node. So regmap will be fetched from there.
- Use generic FIELD_{GET,PREP} macro.
- Remove probe-status info string printout.
- Since the driver depends on the OF config we can remove of_match_ptr()
macro utilization.
Changelog v3:
- Combine l2 and AXI/APB bus patches in a single patchset.
- Retrieve AXI-bus QoS registers by resource name "qos".
- Discard CONFIG_OF dependency since there is none at compile-time.
- Add syscon EHB registers range to the AXI-bus reg property as optional
entry.
- Fix invalid of_property_read_u32() return value test in the l2-ctl
driver.
- Get the reg property back into the l2-ctl DT bindings even though the
driver is using the parental syscon regmap.
- The l2-ctl DT schema will live separately from the system controller,
but the corresponding sub-node of the later DT schema will $ref this
one.
- Set non-default latencies in the l2-ctl DT example.
* baikal/drivers:
memory: Add Baikal-T1 L2-cache Control Block driver
bus: Add Baikal-T1 APB-bus driver
bus: Add Baikal-T1 AXI-bus driver
dt-bindings: bus: Add Baikal-T1 APB-bus binding
dt-bindings: bus: Add Baikal-T1 AXI-bus binding
Link: https://lore.kernel.org/lkml/20200526130841.ap6qlxv7hqmabnh5@mobilestation/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Baikal-T1 CPU or DMAC MMIO requests are handled by the AMBA 3 AXI
Interconnect which routes them to the AXI-APB bridge, which in turn
serializes accesses and routes them to the corresponding APB slave device.
This binding describes the AXI-APB bridge considered as the APB-bus. It is
supposed to be compatible with "be,bt1-apb" and "simple-bus" drivers,
should be equipped with EHB MMIO region and a region with no slave device
mapped, interrupts line number, APB reference clock and domain reset line.
Link: https://lore.kernel.org/r/20200526125928.17096-3-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Olof Johansson <olof@lixom.net>
Cc: linux-mips@vger.kernel.org
Cc: soc@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
AXI3-bus is the main communication bus connecting all high-speed
peripheral IP-cores with RAM controller and with MIPS P5600 cores on
Baikal-T1 SoC. This binding describes the DW AMBA 3 AXI Inteconnect
and Errors Handler Block synthesized on top of it, which are
responsible for the AXI-bus traffic arbitration and errors reporting
upstream to CPU. Baikal-T1 AXI-bus DT node is supposed to be compatible
with "be,bt1-axi" and "simple-bus" drivers, should have reg property with
AXI-bus QOS registers space, syscon phandle reference to the Baikal-T1
System Controller, IRQ line declared, AXI Interconnect reference clock and
reset line.
Link: https://lore.kernel.org/r/20200526125928.17096-2-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Olof Johansson <olof@lixom.net>
Cc: linux-mips@vger.kernel.org
Cc: soc@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add information regarding DLL register properties for getting board
specific configurations. These DLL register settings may vary from
board to board.
Signed-off-by: Sarthak Garg <sartgarg@codeaurora.org>
Link: https://lore.kernel.org/r/1590139950-7288-3-git-send-email-sartgarg@codeaurora.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This documents the devicetree bindings for the SDHC MMC host controller
found in Meson6, Meson8, Meson8b and Meson8m2 SoCs. It can use a
bus-width of 1/4/8-bit and it supports eMMC spec 4.4x/4.5x including
HS200 mode (up to 100MHz clock). It embeds an internal clock controller
which outputs four clocks (mod_clk, sd_clk, tx_clk and rx_clk) and is
fed by four external input clocks (clkin[0-3]). "pclk" is the module
register clock, it has to be enabled to access the registers.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200512204147.504087-2-martin.blumenstingl@googlemail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
preempt_disable() and local_irq_disable/save() are in principle per CPU big
kernel locks. This has several downsides:
- The protection scope is unknown
- Violation of protection rules is hard to detect by instrumentation
- For PREEMPT_RT such sections, unless in low level critical code, can
violate the preemptability constraints.
To address this PREEMPT_RT introduced the concept of local_locks which are
strictly per CPU.
The lock operations map to preempt_disable(), local_irq_disable/save() and
the enabling counterparts on non RT enabled kernels.
If lockdep is enabled local locks gain a lock map which tracks the usage
context. This will catch cases where an area is protected by
preempt_disable() but the access also happens from interrupt context. local
locks have identified quite a few such issues over the years, the most
recent example is:
b7d5dc2107 ("random: add a spinlock_t to struct batched_entropy")
Aside of the lockdep coverage this also improves code readability as it
precisely annotates the protection scope.
PREEMPT_RT substitutes these local locks with 'sleeping' spinlocks to
protect such sections while maintaining preemtability and CPU locality.
local locks can replace:
- preempt_enable()/disable() pairs
- local_irq_disable/enable() pairs
- local_irq_save/restore() pairs
They are also used to replace code which implicitly disables preemption
like:
- get_cpu()/put_cpu()
- get_cpu_var()/put_cpu_var()
with PREEMPT_RT friendly constructs.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20200527201119.1692513-2-bigeasy@linutronix.de
Add DT binding for Texas Instruments K3 Multicore SoC platforms chipid
module which is represented by CTRLMMR_xxx_JTAGID register and contains
information about SoC id and revision.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Convert the imx tpm pwm binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the imx pwm binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the MXC RTC V2 binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the MXC RTC binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX6UL clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX6SLL clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX6SL clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX6SX clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX6Q clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Add compatible for SC7180 in usb dwc3 bindings.
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert USB DWC3 bindings to DT schema format using json-schema.
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
[robh: fixup example warnings]
Signed-off-by: Rob Herring <robh@kernel.org>
Add an array property that configures the General Purpose Input (GPI)
register. The device has 4 GPI pins and each pin can be configured in 1
of 7 different ways.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200526200917.10385-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCI host controller found on Loongson PCHs and SoCs.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Allow the user to configure where on the cable the TDR data should be
retrieved, in terms of first and last sample, and the step between
samples. Also add the ability to ask for TDR data for just one pair.
If this configuration is not provided, it defaults to 1-150m at 1m
intervals for all pairs.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
v3:
Move the TDR configuration into a structure
Add a range check on step
Use NL_SET_ERR_MSG_ATTR() when appropriate
Move TDR configuration into a nest
Document attributes in the request
Signed-off-by: David S. Miller <davem@davemloft.net>
Some Ethernet PHYs can return the raw time domain reflectromatry data.
Add the attributes to allow this data to be requested and returned via
netlink ethtool.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
v2:
m -> cm
Report what the PHY actually used for start/stop/step.
Signed-off-by: David S. Miller <davem@davemloft.net>
- rename the 'gpr' property string to 'fsl,stop-mode'.
- Update the property to define gpr register offset and
bit in DT, since different instance have different gpr bit.
v2:
* rename 'gpr' property string to 'fsl,stop-mode'.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MT6397 mfd includes a pin controller. Add binding
a description for it.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Allows the user to compensate the intrinsic resistance of the battery
to accelerate the charging cycle.
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add device tree binding information for mp2629 mfd driver.
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Second set of patches for v5.8. Lots of new features and new supported
hardware for mt76. Also rtw88 got new hardware support.
Major changes:
rtw88
* add support for Realtek 8723DE PCI adapter
* rename rtw88.ko/rtwpci.ko to rtw88_core.ko/rtw88_pci.ko
iwlwifi
* stop supporting swcrypto and bt_coex_active module parameters on
mvm devices
* enable A-AMSDU in low latency
mt76
* new devices for mt76x0/mt76x2
* support for non-offload firmware on mt7663
* hw/sched scan support for mt7663
* mt7615/mt7663 MSI support
* TDLS support
* mt7603/mt7615 rate control fixes
* new driver for mt7915
* wowlan support for mt7663
* suspend/resume support for mt7663
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJey69PAAoJEG4XJFUm622bIcEH/iT2M037SSfySAdykAvUQHJU
E1E9iZKJVVKZ+8nfTh03thtT4HyPC0jZMjWrqL5N4PFTKJKJo/t9HfAEq4niboGj
l2jeqQpujck7zUBKQh4HWWJiDtpOiMUS9noHSujnS4NThtRo/+/qxIiCz6nxVBix
DHKi+zZR4t05U3UYYivWc/CfojIXLrqeZl187MnDBV6LvNP8/en+HpmnCzp/trFn
qxBl2MWzr1oZf8j+t1UPtDVnUz1OMcHvnCQosQMeBwNtkkqKGc7Cip6VG/fqsLau
HdLwQWvsRByFT7yaXbwI+/uOMZhZ/KPWx9BdDdistegxyE8fZvjs/csfk7p3lSc=
=sKYR
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-2020-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.8
Second set of patches for v5.8. Lots of new features and new supported
hardware for mt76. Also rtw88 got new hardware support.
Major changes:
rtw88
* add support for Realtek 8723DE PCI adapter
* rename rtw88.ko/rtwpci.ko to rtw88_core.ko/rtw88_pci.ko
iwlwifi
* stop supporting swcrypto and bt_coex_active module parameters on
mvm devices
* enable A-AMSDU in low latency
mt76
* new devices for mt76x0/mt76x2
* support for non-offload firmware on mt7663
* hw/sched scan support for mt7663
* mt7615/mt7663 MSI support
* TDLS support
* mt7603/mt7615 rate control fixes
* new driver for mt7915
* wowlan support for mt7663
* suspend/resume support for mt7663
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The in-kernel trace event API should have its own section, and the
duplicate section numbers need fixing as well.
Reported-by: Li Xinhai <lixinhai.lxh@gmail.com>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/90ea854dfb728390b50ddf8a8675238973ee014a.camel@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
When an EFI variable is reading from:
/sys/firmware/efi/efivars
(for example using "hexdump"), the first 4 bytes of the
output are not the real EFI variable data, but the variable
attributes (in little-endian format).
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Link: https://lore.kernel.org/r/20200519084128.12756-1-f.suligoi@asem.it
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This is a first pass at updating the basic documentation on
Linux Security Modules (LSM), which is frighteningly out of date.
Remove untrue statements about the LSM framework. Replace them
with true statements where it is convenient to do so. This is
the beginnig of a larger effort to bring the LSM documentation
up to date.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Link: https://lore.kernel.org/r/4c053d72-2d58-612f-6d6b-f04226d0181e@schaufler-ca.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This documents ignore-unaligned-usertrap, unaligned-dump-stack, and
unaligned-trap, based on arch/arc/kernel/unaligned.c,
arch/ia64/kernel/unaligned.c, and arch/parisc/kernel/unaligned.c.
While we're at it, integrate unaligned-memory-access.txt into the docs
tree.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200515212443.5012-1-steve@sk2.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Update Documentation/admin-guide/bug-hunting.rst:
- add a small section on "Modules linked in" and their possible flags;
- delete all references to ksymoops since it is no longer applicable;
- fix spello, grammar, and punctuation;
- note that get_maintainers.pl only provides recent patchers if it is
run inside a git tree;
- add mention of scripts/decode_stacktrace.sh;
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: greg@wind.rmcc.com
Link: https://lore.kernel.org/r/c629a9ef-3867-c3d1-f6c9-2c3b0e4ac68a@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Highlights:
- new boards :Beelink GT-King Pro (G12B SoC), Smartlabs SML-5442TW
(S905D), Hardkernel ODROID-C4 (SM1)
- audio: support for GX-family SoCs
- audio: internal DAC support
- use the new USB control driver for GXL and GXM
-----BEGIN PGP SIGNATURE-----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=JbXj
-----END PGP SIGNATURE-----
Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt
arm64: dts: Amlogic updates for v5.8
Highlights:
- new boards :Beelink GT-King Pro (G12B SoC), Smartlabs SML-5442TW
(S905D), Hardkernel ODROID-C4 (SM1)
- audio: support for GX-family SoCs
- audio: internal DAC support
- use the new USB control driver for GXL and GXM
* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (33 commits)
arm64: dts: meson-g12b-gtking-pro: add initial device-tree
dt-bindings: arm: amlogic: add support for the Beelink GT-King Pro
arm64: dts: meson-g12b-gtking: add initial device-tree
dt-bindings: arm: amlogic: add support for the Beelink GT-King
arm64: dts: meson: convert ugoos-am6 to common w400 dtsi
arm64: dts: meson: add ethernet interrupt to wetek dtsi
arm64: dts: meson: add support for the Smartlabs SML-5442TW
dt-bindings: arm: amlogic: add support for the Smartlabs SML-5442TW
dt-bindings: add vendor prefix for Smartlabs LLC
arm64: dts: meson: g12: add internal DAC glue
arm64: dts: meson: g12: add internal DAC
arm64: dts: meson: libretech-pc: add internal DAC support
arm64: dts: meson: libretech-ac: add internal DAC support
arm64: dts: meson: libretech-cc: add internal DAC support
arm64: dts: meson: p230-q200: add internal DAC support
arm64: dts: meson: gxl: add acodec support
arm64: dts: meson-sm1: add support for Hardkernel ODROID-C4
dt-bindings: arm: amlogic: add odroid-c4 bindings
arm64: dts: meson-sm1: add cpu thermal nodes
arm64: dts: meson-g12b: move G12B thermal nodes to meson-g12b.dtsi
...
Link: https://lore.kernel.org/r/5ec6f56a.1c69fb81.fc5d5.9ca6@mx.google.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains a V4L2 video capture driver for Tegra210.
-----BEGIN PGP SIGNATURE-----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=ZA0j
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.8-media' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
media: tegra: Changes for v5.8-rc1
This contains a V4L2 video capture driver for Tegra210.
* tag 'tegra-for-5.8-media' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
media: tegra-video: Do not enable COMPILE_TEST
MAINTAINERS: correct path in TEGRA VIDEO DRIVER
media: tegra-video: Make tegra210_video_formats static
MAINTAINERS: Add Tegra Video driver section
media: tegra-video: Add Tegra210 Video input driver
dt-bindings: i2c: tegra: Document Tegra210 VI I2C
dt-bindings: tegra: Add VI and CSI bindings
dt-bindings: cpufreq: Add binding for NVIDIA Tegra20/30
dt-bindings: memory: tegra: Add external memory controller binding for Tegra210
dt-bindings: clock: tegra: Remove PMC clock IDs
dt-bindings: clock: tegra: Add clock ID for CSI TPG clock
Link: https://lore.kernel.org/r/20200515145311.1580134-7-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains a large set of cleanups, bug fixes, general improvements
and documentation fixes for the RPMH driver. It adds a debugfs mechanism
for inspecting Command DB. Socinfo got the "soc_id" attribute defines
and definitions for a various variants of MSM8939.
RPMH, RPMPD and RPMHPD where made possible to build as modules, but RPMH
had to be reverted due to a compilation issue when tracing is enabled.
RPMHPD gained power-domains for the SM8250 voltage corners.
The SCM driver gained fixes for two build warnings and the SMP2P had an
unnecessary error print removed.
-----BEGIN PGP SIGNATURE-----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=tkhb
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.8
This contains a large set of cleanups, bug fixes, general improvements
and documentation fixes for the RPMH driver. It adds a debugfs mechanism
for inspecting Command DB. Socinfo got the "soc_id" attribute defines
and definitions for a various variants of MSM8939.
RPMH, RPMPD and RPMHPD where made possible to build as modules, but RPMH
had to be reverted due to a compilation issue when tracing is enabled.
RPMHPD gained power-domains for the SM8250 voltage corners.
The SCM driver gained fixes for two build warnings and the SMP2P had an
unnecessary error print removed.
* tag 'qcom-drivers-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (42 commits)
Revert "soc: qcom: rpmh: Allow RPMH driver to be loaded as a module"
soc: qcom: rpmh-rsc: Remove the pm_lock
soc: qcom: rpmh-rsc: Simplify locking by eliminating the per-TCS lock
kernel/cpu_pm: Fix uninitted local in cpu_pm
soc: qcom: rpmh-rsc: We aren't notified of our own failure w/ NOTIFY_BAD
soc: qcom: rpmh-rsc: Correctly ignore CPU_CLUSTER_PM notifications
firmware: qcom_scm-legacy: Replace zero-length array with flexible-array
soc: qcom: rpmh-rsc: Timeout after 1 second in write_tcs_reg_sync()
soc: qcom: rpmh-rsc: Factor "tcs_reg_addr" and "tcs_cmd_addr" calculation
soc: qcom: socinfo: add msm8936/39 and apq8036/39 soc ids
soc: qcom: aoss: Add SM8250 compatible
soc: qcom: pdr: Remove impossible error condition
soc: qcom: rpmh: Dirt can only make you dirtier, not cleaner
soc: qcom: rpmhpd: Add SM8250 power domains
firmware: qcom_scm: fix bogous abuse of dma-direct internals
dt-bindings: soc: qcom: apr: Use generic node names for APR services
firmware: qcom_scm: Remove unneeded conversion to bool
soc: qcom: cmd-db: Properly endian swap the slv_id for debugfs
soc: qcom: cmd-db: Use 5 digits for printing address
soc: qcom: cmd-db: Cast sizeof() to int to silence field width warning
...
Link: https://lore.kernel.org/r/20200519052533.1250024-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Documentation/features/debug/kprobes/arch-support.txt incorrectly
states that RISC-V has kprobes support. This is not the case.
Note that entries that have been incorrectly marked with 'ok' will not
be changed back to 'TODO' by the features-refresh.sh script.
Fixes: 7156fc2928 ("Documentation/features: Refresh the arch support status files in place")
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Link: https://lore.kernel.org/r/20200523210005.59140-1-bjorn.topel@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
I was manually editing the arch-support.txt for eBPF-JIT, when I
realized the refresh script [1] has not been run for a while. Let's
fix that, so that the entries are more up-to-date.
[1] Documentation/features/scripts/features-refresh.sh
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Link: https://lore.kernel.org/r/20200523191135.21889-1-bjorn.topel@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This is a left-over of commit 39808e451f ("kbuild: do not read
$(KBUILD_EXTMOD)/Module.symvers").
Kbuild no longer supports this way.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This tag adds support for i.MX8MP and i.MX8MN SoCs to the i.MX7 reset
controller driver, extends the Hi6220 reset driver to support the AO
reset controller used to bring the Mali450 GPU out of reset, and adds
a define for the internal DAC reset line on Amlogic GXL SoCs.
-----BEGIN PGP SIGNATURE-----
iI4EABYIADYWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCXr6nvBgccGhpbGlwcC56
YWJlbEBnbWFpbC5jb20ACgkQ1YWnJRg3YsB63QEA8Rig0c9jN9LBDxVmqxB8dU/k
4fc3vMtuxbbrzmoD9rIA/ApMrQe77k/JW+hCSBrgCQWlvHInRncKwrEIhWk7ADkN
=BaS5
-----END PGP SIGNATURE-----
Merge tag 'reset-for-v5.8' of git://git.pengutronix.de/pza/linux into arm/drivers
Reset controller updates for v5.8
This tag adds support for i.MX8MP and i.MX8MN SoCs to the i.MX7 reset
controller driver, extends the Hi6220 reset driver to support the AO
reset controller used to bring the Mali450 GPU out of reset, and adds
a define for the internal DAC reset line on Amlogic GXL SoCs.
* tag 'reset-for-v5.8' of git://git.pengutronix.de/pza/linux:
reset: hi6220: Add support for AO reset controller
reset: imx7: Add support for i.MX8MP SoC
dt-bindings: reset: imx7: Document usage on i.MX8MP SoC
dt-bindings: reset: imx7: Add support for i.MX8MN
dt-bindings: reset: meson: add gxl internal dac reset
Link: https://lore.kernel.org/r/20200515143844.GA17201@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- support GX SoCs in the EE power-controller driver
-----BEGIN PGP SIGNATURE-----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=nn2j
-----END PGP SIGNATURE-----
Merge tag 'amlogic-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/drivers
soc: amlogic: driver updates for v5.8
- support GX SoCs in the EE power-controller driver
* tag 'amlogic-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
soc: amlogic: meson-ee-pwrc: add support for the Meson GX SoCs
soc: amlogic: meson-ee-pwrc: add support for Meson8/Meson8b/Meson8m2
dt-bindings: power: meson-ee-pwrc: add support for the Meson GX SoCs
dt-bindings: power: meson-ee-pwrc: add support for Meson8/8b/8m2
Link: https://lore.kernel.org/r/5ec6f570.1c69fb81.a3753.711b@mx.google.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
the entry point for the DRM subsystem.
Replace clk-provider.h include with of_clk.h for mach-mediatek
-----BEGIN PGP SIGNATURE-----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=v4ft
-----END PGP SIGNATURE-----
Merge tag 'v5.7-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers
Refactor the mmsys to reflect that it's a clock driver and
the entry point for the DRM subsystem.
Replace clk-provider.h include with of_clk.h for mach-mediatek
* tag 'v5.7-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
ARM: mediatek: Replace <linux/clk-provider.h> by <linux/of_clk.h>
soc: mediatek: Missing platform_device_unregister() on error in mtk_mmsys_probe()
soc: mediatek: mmsys: Drop <linux/clk-provider.h>
soc / drm: mediatek: Fix mediatek-drm device probing
soc / drm: mediatek: Move routing control to mmsys device
clk / soc: mediatek: Move mt8173 MMSYS to platform driver
dt-bindings: mediatek: Update mmsys binding to reflect it is a system controller
drm/mediatek: Omit warning on probe defers
Link: https://lore.kernel.org/r/2cf27d33-59c6-023b-9993-57a2639824ea@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Addition of ARM SMC/HVC as SCMI transport type with required
abstraction already in place
2. Initial infrastructure support to add SCMI notifications from
platform to agents
3. Miscellaneous fix adding header include guards
-----BEGIN PGP SIGNATURE-----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=qqL7
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers
ARM SCMI/SCPI updates for v5.8
1. Addition of ARM SMC/HVC as SCMI transport type with required
abstraction already in place
2. Initial infrastructure support to add SCMI notifications from
platform to agents
3. Miscellaneous fix adding header include guards
* tag 'scmi-updates-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: fix psci dependency
firmware: arm_scmi: Fix return error code in smc_send_message
firmware: arm_scmi: Fix handling of unexpected delayed responses
firmware: arm_scmi: Clear channel for delayed responses
firmware: arm_scmi: Clear channel on reception of unexpected responses
firmware: arm_scmi: Rename .clear_notification() transport_ops
firmware: arm_scmi: Add support for notifications message processing
firmware: arm_scmi: Add notifications support in transport layer
firmware: arm_scmi: Update protocol commands and notification list
firmware: arm_scmi: Add receive buffer support for notifications
firmware: arm_scpi: Add include guard to linux/scpi_protocol.h
firmware: arm_scmi: Add include guard to linux/scmi_protocol.h
firmware: arm_scmi: Drop checking for shmem property in parent node
firmware: arm_scmi: Check shmem property for channel availablity
firmware: arm_scmi: Drop empty stub for smc_mark_txdone
firmware: arm_scmi: Make mutex channel specific
firmware: arm_scmi: Add smc/hvc transport
dt-bindings: arm: Add smc/hvc transport for SCMI
Link: https://lore.kernel.org/r/20200512110357.GA26454@bogus
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The media bus formats to be used on serial busses are documented but there
was no reference from CSI-2 documentation. Add that now.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch adds documentation of device tree in YAML schema for the
OV8856 CMOS image sensor.
Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
- Rename pr_efi/pr_efi_err to efi_info/efi_err, and use them consistently
- Simplify and unify initrd loading
- Parse the builtin command line on x86 (if provided)
- Implement printk() support, including support for wide character strings
- Some fixes for issues introduced by the first batch of v5.8 changes
- Fix a missing prototypes warning
- Simplify GDT handling in early mixed mode thunking code
- Some other minor fixes and cleanups
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEnNKg2mrY9zMBdeK7wjcgfpV0+n0FAl7Lb8UACgkQwjcgfpV0
+n3/aAgAkEqqR/BoyzFiyYHujq6bXjESKYr8LrIjNWfnofB6nZqp1yXwFdL0qbj/
PTZ1qIQAnOMmj11lvy1X894h2ZLqE6XEkqv7Xd2oxkh3fF6amlQUWfMpXUuGLo1k
C4QGSfA0OOiM0OOi0Aqk1fL7sTmH23/j63dTR+fH8JMuYgjdls/yWNs0miqf8W2H
ftj8fAKgHIJzFvdTC0vn1DZ6dEKczGLPEcVZ2ns2IJOJ69DsStKPLcD0mlW+EgV2
EyfRSCQv55RYZRhdUOb+yVLRfU0M0IMDrrCDErHxZHXnQy00tmKXiEL20yuegv3u
MUtRRw8ocn2/RskjgZkxtMjAAlty9A==
=AwCh
-----END PGP SIGNATURE-----
Merge tag 'efi-changes-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core
More EFI changes for v5.8:
- Rename pr_efi/pr_efi_err to efi_info/efi_err, and use them consistently
- Simplify and unify initrd loading
- Parse the builtin command line on x86 (if provided)
- Implement printk() support, including support for wide character strings
- Some fixes for issues introduced by the first batch of v5.8 changes
- Fix a missing prototypes warning
- Simplify GDT handling in early mixed mode thunking code
- Some other minor fixes and cleanups
Conflicts:
drivers/firmware/efi/libstub/efistub.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Rather busy cycle. We have a total 99 non-merge commits going into v5.8
merge window. The majority of the changes are in dwc3 this around (31.7%
of all changes). It's composed mostly Thinh's recent updates to get dwc3
to behave correctly with stream transfers. We have also have Roger's for
Keystone platforms and Neil's updates for the meson glue layer.
Apart from those, we have the usual set of non-critical fixes, new
device IDs, spelling fixes all over the place.
Signed-off-by: Felipe Balbi <balbi@kernel.org>
-----BEGIN PGP SIGNATURE-----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=OiS0
-----END PGP SIGNATURE-----
Merge tag 'usb-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes:
USB: changes for v5.8 merge window
Rather busy cycle. We have a total 99 non-merge commits going into v5.8
merge window. The majority of the changes are in dwc3 this around (31.7%
of all changes). It's composed mostly Thinh's recent updates to get dwc3
to behave correctly with stream transfers. We have also have Roger's for
Keystone platforms and Neil's updates for the meson glue layer.
Apart from those, we have the usual set of non-critical fixes, new
device IDs, spelling fixes all over the place.
Signed-off-by: Felipe Balbi <balbi@kernel.org>
* tag 'usb-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (99 commits)
usb: dwc3: keystone: Turn on USB3 PHY before controller
dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property
dt-bindings: usb: convert keystone-usb.txt to YAML
usb: dwc3: gadget: Check for prepared TRBs
usb: gadget: Fix issue with config_ep_by_speed function
usb: cdns3: ep0: delete the redundant status stage
usb: dwc2: Update Core Reset programming flow.
usb: gadget: fsl: Fix a wrong judgment in fsl_udc_probe()
usb: gadget: fix potential double-free in m66592_probe.
usb: cdns3: Fix runtime PM imbalance on error
usb: gadget: lpc32xx_udc: don't dereference ep pointer before null check
usb: dwc3: Increase timeout for CmdAct cleared by device controller
USB: dummy-hcd: use configurable endpoint naming scheme
usb: cdns3: gadget: assign interrupt number to USB gadget structure
usb: gadget: core: sync interrupt before unbind the udc
arm64: dts: qcom: sc7180: Add interconnect properties for USB
arm64: dts: qcom: sdm845: Add interconnect properties for USB
dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver
ARM: dts: at91: Remove the USB EP child node
dt-bindings: usb: atmel: Mark EP child node as deprecated
...
This driver adds support for Dynamic Platform and Thermal Framework
battery participant device support.
These attributes are presented via sysfs interface under the platform
device for the battery participant:
$ls /sys/bus/platform/devices/INT3532:00/dptf_battery
current_discharge_capbility_ma
max_platform_power_mw
no_load_voltage_mv
high_freq_impedance_mohm
max_steady_state_power_mw
Refer to the documentation at
Documentation/ABI/testing/sysfs-platform-dptf
for details.
Here the implementation reuses existing dptf-power.c as the motivation and
processing is same. It also shares one ACPI method. Here this change is
using participant type, "PTYP" method to identify and do different
processing. By using participant type, create/delete either "dptf_power"
or "dptf_battery" attribute group and send notifications.
The particpant type for for the battery participant is 0x0C.
ACPI methods description:
PMAX (Intel(R) Dynamic Tuning Platform Max Power Supplied by Battery):
This object evaluates to the maximum platform power that can be supported
by the battery in milli watts.
PBSS (Intel(R) Dynamic Tuning Power Battery Steady State):
This object returns the max sustained power for battery in milli watts.
RBHF (Intel(R) Dynamic Tuning High Frequency Impedance):
This object returns high frequency impedance value that can be obtained
from battery fuel gauge.
VBNL (Intel(R) Dynamic Tuning No-Load Voltage)
This object returns battery instantaneous no-load voltage that can be
obtained from battery fuel gauge in milli volts
CMPP (Intel(R) Dynamic Tuning Current Discharge Capability)
This object returns battery discharge current capability obtained from
battery fuel gauge milli amps.
Notifications:
0x80: PMAX change. Used to notify Intel(R)Dynamic Tuning Battery
participant driver when the PMAX has changed by 250mw.
0x83: PBSS change. Used to notify Intel(R) Dynamic Tuning Battery
participant driver when the power source has changed.
0x85: RBHF change. Used to notify Intel(R)Dynamic Tuning Battery
participant driver when the RBHF has changed over a threshold by
5mOhm.
0x86: Battery Capability change. Used to notify Intel(R)Dynamic Tuning
Battery participant driver when the battery capability has changed.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add two additional attributes to the existing power participant driver:
rest_of_platform_power_mw: (RO) Shows the rest of worst case platform
power in mW outside of S0C. This will help in power distribution to SoC
and rest of the system. For example on a test system, this value is 2.5W
with a 15W TDP SoC. Based on the adapter rating (adapter_rating_mw), user
space software can decide on proper power allocation to SoC to improve
short term performance via powercap/RAPL interface.
prochot_confirm: (WO) Confirm EC about a prochot notification.
Also userspace is notified via sysfs_notify(), whenever power source or
rest of the platform power is changed. So user space can use poll()
system call on those attributes.
The ACPI methods used in this patch are as follows:
PROP
This object evaluates to the rest of worst case platform power in mW.
Bits:
23:0 Worst case rest of platform power in mW.
PBOK
PBOK is a method designed to provide a mechanism for OSPM to change power
setting before EC can de-assert a PROCHOT from a device. The EC may
receive several PROCHOTs, so it has a sequence number attached to PSRC
(read via existing attribute "platform_power_source"). Once OSPM takes
action for a PSRC change notification, it can call PBOK method to confirm
with the sequence number.
Bits:
3:0 Power Delivery State Change Sequence number
30 Reserved
31 0 – Not OK to de-assert PROCHOT
1 – OK to de-assert PROCHOT
PSRC (Platform Power Source): Not new in this patch but for
documentation for new bits
This object evaluates to an integer that represents the system power
source as well as the power delivery state change sequence number.
Bits:
3:0 The current power source as an integer for AC, DC, USB, Wireless.
0 = DC, 1 = AC, 2 = USB, 3 = Wireless Charging
7:4 Power Delivery State Change Sequence Number. Default value is 0
Notifications:
0x81: (Power State Change) Used to notify when the power source has
changed.
0x84: (PROP change) Used to notify when the platform rest of power has
changed.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject, minor ABI documentation edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
An upcoming Btrfs fix needs to know the original size of a non-cloned
bios. Rather than accessing the bvec table directly, let's add a
bio_for_each_bvec_all() accessor.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
- Add support for the new RZ/G1H (r8a7742) SoC,
- Minor fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXsU4BgAKCRCKwlD9ZEnx
cLVzAP9GTdDrxNO4d9JceM3WvhsX/JrpXOOJjgjObAZj7AtN3AEA0iXhBsIOP7lN
oiAYEWBTmaAVBvwaVWdvKT4AhLEv3wQ=
=kdu0
-----END PGP SIGNATURE-----
Merge tag 'sh-pfc-for-v5.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: sh-pfc: Updates for v5.8 (take two)
- Add support for the new RZ/G1H (r8a7742) SoC,
- Minor fixes and improvements.
Document Device Tree bindings for the Renesas EMMA Mobile General
Purpose I/O Interface.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20200519081157.29095-1-geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
AM654 SoC requires USB3.0 PHY to be turned on before the USB controller.
For this SoC, the 'phys' property is used to provide the USB3.0
reference.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Add documentation for the interconnects and interconnect-names
properties for USB.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
There is no need to describe the end point in the deice tree. These
properties won't be use anymore, so mark them as deprecated to keep
the old device tree documented.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
There is now an updated bindings for these SoCs making the old
compatible obsolete.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
The registers which are managed by the meson-gxl-usb3 PHY driver are
actually "USB control" registers (which are "glue" registers which
manage OTG detection and routing of the OTG capable port between the
DWC2 peripheral-only controller and the DWC3 host-only controller).
Drop the meson-gxl-usb3 PHY driver now that the dwc3-meson-g12a-usb
driver supports the USB control registers on GXL and GXM SoCs (these
were previously managed by the meson-gxl-usb3 PHY driver).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
This watchdog can be used on ARM systems with a Secure
Monitor firmware to forward watchdog operations to
firmware via a Secure Monitor Call.
Signed-off-by: Evan Benn <evanbenn@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200505131242.v6.1.Id96574f1f52479d7a2f3b866b8a0552ab8c03d7f@changeid
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The commit d0684c8a93 ("watchdog: Make stop function optional")
made stop function not mandatory, but the comments
and the doc weren't reflected. Fix it to clarify.
Signed-off-by: Bumsik Kim <k.bumsik@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200403031507.63487-1-k.bumsik@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The MSCC bug fix in 'net' had to be slightly adjusted because the
register accesses are done slightly differently in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix RCU warnings in ipv6 multicast router code, from Madhuparna
Bhowmik.
2) Nexthop attributes aren't being checked properly because of
mis-initialized iterator, from David Ahern.
3) Revert iop_idents_reserve() change as it caused performance
regressions and was just working around what is really a UBSAN bug
in the compiler. From Yuqi Jin.
4) Read MAC address properly from ROM in bmac driver (double iteration
proceeds past end of address array), from Jeremy Kerr.
5) Add Microsoft Surface device IDs to r8152, from Marc Payne.
6) Prevent reference to freed SKB in __netif_receive_skb_core(), from
Boris Sukholitko.
7) Fix ACK discard behavior in rxrpc, from David Howells.
8) Preserve flow hash across packet scrubbing in wireguard, from Jason
A. Donenfeld.
9) Cap option length properly for SO_BINDTODEVICE in AX25, from Eric
Dumazet.
10) Fix encryption error checking in kTLS code, from Vadim Fedorenko.
11) Missing BPF prog ref release in flow dissector, from Jakub Sitnicki.
12) dst_cache must be used with BH disabled in tipc, from Eric Dumazet.
13) Fix use after free in mlxsw driver, from Jiri Pirko.
14) Order kTLS key destruction properly in mlx5 driver, from Tariq
Toukan.
15) Check devm_platform_ioremap_resource() return value properly in
several drivers, from Tiezhu Yang.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (71 commits)
net: smsc911x: Fix runtime PM imbalance on error
net/mlx4_core: fix a memory leak bug.
net: ethernet: ti: cpsw: fix ASSERT_RTNL() warning during suspend
net: phy: mscc: fix initialization of the MACsec protocol mode
net: stmmac: don't attach interface until resume finishes
net: Fix return value about devm_platform_ioremap_resource()
net/mlx5: Fix error flow in case of function_setup failure
net/mlx5e: CT: Correctly get flow rule
net/mlx5e: Update netdev txq on completions during closure
net/mlx5: Annotate mutex destroy for root ns
net/mlx5: Don't maintain a case of del_sw_func being null
net/mlx5: Fix cleaning unmanaged flow tables
net/mlx5: Fix memory leak in mlx5_events_init
net/mlx5e: Fix inner tirs handling
net/mlx5e: kTLS, Destroy key object after destroying the TIS
net/mlx5e: Fix allowed tc redirect merged eswitch offload cases
net/mlx5: Avoid processing commands before cmdif is ready
net/mlx5: Fix a race when moving command interface to events mode
net/mlx5: Add command entry handling completion
rxrpc: Fix a memory leak in rxkad_verify_response()
...
Provide devm_register_netdev() - a device resource managed variant
of register_netdev(). This new helper will only work for net_device
structs that are also already managed by devres.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new section for networking devres helpers to devres.rst and list
the two existing devm functions.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-05-23
The following pull-request contains BPF updates for your *net-next* tree.
We've added 50 non-merge commits during the last 8 day(s) which contain
a total of 109 files changed, 2776 insertions(+), 2887 deletions(-).
The main changes are:
1) Add a new AF_XDP buffer allocation API to the core in order to help
lowering the bar for drivers adopting AF_XDP support. i40e, ice, ixgbe
as well as mlx5 have been moved over to the new API and also gained a
small improvement in performance, from Björn Töpel and Magnus Karlsson.
2) Add getpeername()/getsockname() attach types for BPF sock_addr programs
in order to allow for e.g. reverse translation of load-balancer backend
to service address/port tuple from a connected peer, from Daniel Borkmann.
3) Improve the BPF verifier is_branch_taken() logic to evaluate pointers
being non-NULL, e.g. if after an initial test another non-NULL test on
that pointer follows in a given path, then it can be pruned right away,
from John Fastabend.
4) Larger rework of BPF sockmap selftests to make output easier to understand
and to reduce overall runtime as well as adding new BPF kTLS selftests
that run in combination with sockmap, also from John Fastabend.
5) Batch of misc updates to BPF selftests including fixing up test_align
to match verifier output again and moving it under test_progs, allowing
bpf_iter selftest to compile on machines with older vmlinux.h, and
updating config options for lirc and v6 segment routing helpers, from
Stanislav Fomichev, Andrii Nakryiko and Alan Maguire.
6) Conversion of BPF tracing samples outdated internal BPF loader to use
libbpf API instead, from Daniel T. Lee.
7) Follow-up to BPF kernel test infrastructure in order to fix a flake in
the XDP selftests, from Jesper Dangaard Brouer.
8) Minor improvements to libbpf's internal hashmap implementation, from
Ian Rogers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Getting a clean BPF selftests run involves ensuring latest trunk LLVM/clang
are used, pahole is recent (>=1.16) and config matches the specified
config file as closely as possible. Add to bpf_devel_QA.rst and point
tools/testing/selftests/bpf/README.rst to it.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/1590146674-25485-1-git-send-email-alan.maguire@oracle.com
Document Device Tree bindings for the Renesas EMMA Mobile System Timer.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200519081101.28973-1-geert+renesas@glider.be
This binding file doesn't belong to the rtc seeing it's a pure timer
with no rtc facilities like days/months/years counting and alarms.
So move the YAML-file to the Documentation/devicetree/bindings/timer/
directory.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200521204818.25436-3-Sergey.Semin@baikalelectronics.ru
Modern device tree bindings are supposed to be created as YAML-files
in accordance with DT schema. This commit replaces Synopsys DW Timer
legacy bare text binding with YAML file. As before the binding file
states that the corresponding dts node is supposed to be compatible
with generic DW APB Timer indicated by the "snps,dw-apb-timer"
compatible string and to provide a mandatory registers memory range,
one timer interrupt, either reference clock source or a fixed clock
rate value. It may also have an optional APB bus reference clock
phandle specified.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200521204818.25436-2-Sergey.Semin@baikalelectronics.ru
This adds yaml DT bindings for the MediaTek STAR Ethernet MAC present
on the mt8* family of SoCs.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PERICFG controller is present on the MT8516 SoC. Add an appropriate
compatible variant.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert the DT binding .txt file for MediaTek's peripheral configuration
controller to YAML. There's one special case where the compatible has
three positions. Otherwise, it's a pretty normal syscon.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The debugfs qm_regs file is already in the qm directory, so no qm_ prefix
is required.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Hisilicon ZIP engine driver uses debugfs
to provides IO operation debug information
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add debugfs to provides IO operation debug information
and add BD processing timeout count function
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Hisilicon SEC engine driver uses debugfs
to provides IO operation debug information
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The QM driver uses debugfs to provides the current state of
the QM state machine
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add DebugFS method to get the information of IRQ/Requests/QP .etc of QM
for HPRE/ZIP/SEC drivers.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for the Maxim MAX6654 to the lm90 driver.
The MAX6654 is a temperature sensor, similar to the others,
but with some differences regarding the configuration
register, and the sampling rate at which extended resolution
becomes possible.
Signed-off-by: Josh Lehan <krellan@google.com>
Link: https://lore.kernel.org/r/20200513184248.145765-1-krellan@google.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
MAX16601 is a VR13.HC Dual-Output Voltage Regulator Chipset,
implementing a (8+1) multiphase synchronous buck converter.
Cc: Alex Qiu <xqiu@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Implement alert functions for INA226, INA230 and INA231. Expose 06h
Mask/Enable and 07h Alert Limit registers via alert setting and alarm
files.
Signed-off-by: Alex Qiu <xqiu@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This patch adds the bindings for the R-Car PCIe endpoint driver.
Link: https://lore.kernel.org/r/1588854799-13710-7-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
*) Add new PHY driver to support Cadence SALVO PHY which supports USB3 & USB2
*) Add new PHY driver to support Intel ComboPhy which supports PCIe, SATA and
EMAC
*) Add new PHY driver for Qualcomm IPQ40xx USB PHY
*) Add new PHY driver for Synopsys FemtoPHY V2 driver used in Qualcomm SOCs
*) Add support for Qualcomm SM8250 UFS PHY and SM8150 QMP USB3 PHY in
qcom-qmp-phy driver
*) Add support for Amlogic USB2 PHY on Meson8m2 in phy-meson8b-usb2 driver
*) Add DisplayPort mode support in Wiz (TI Cadence PHY wrapper), to enable eDP
in TI's J721E SoC
*) Add support for super speed USB PHY in TI's AM654 SoC
*) Add fix in Broadcom Stingray USB PHY to get USB PHY PLL lock reliably
*) Add fix in Samsung phy-s5pv210-usb2 to get USB working on s5pv210
*) Add fix in Amlogic phy-meson8b-usb2 to get host only mode working on Meson8
*) Add fix in Cadence phy-cadence-sierra to get USB3 device disconnect issue
*) Convert meson8b-usb2-phy, qcom-qmp-phy, rcar-gen3-phy-usb2 and
rcar-gen3-phy-usb3 device tree binding to YAML schema
*) Minor fixes and cleanups in phy-cpcap-usb, j721e-wiz, omap-usb2,
phy-bcm-sr-usb, phy-brcm-usb PHY driver
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-----BEGIN PGP SIGNATURE-----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=H+Lw
-----END PGP SIGNATURE-----
Merge tag 'phy-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into usb-next
Kishon writes:
phy: for 5.8
*) Add new PHY driver to support Cadence SALVO PHY which supports USB3 & USB2
*) Add new PHY driver to support Intel ComboPhy which supports PCIe, SATA and
EMAC
*) Add new PHY driver for Qualcomm IPQ40xx USB PHY
*) Add new PHY driver for Synopsys FemtoPHY V2 driver used in Qualcomm SOCs
*) Add support for Qualcomm SM8250 UFS PHY and SM8150 QMP USB3 PHY in
qcom-qmp-phy driver
*) Add support for Amlogic USB2 PHY on Meson8m2 in phy-meson8b-usb2 driver
*) Add DisplayPort mode support in Wiz (TI Cadence PHY wrapper), to enable eDP
in TI's J721E SoC
*) Add support for super speed USB PHY in TI's AM654 SoC
*) Add fix in Broadcom Stingray USB PHY to get USB PHY PLL lock reliably
*) Add fix in Samsung phy-s5pv210-usb2 to get USB working on s5pv210
*) Add fix in Amlogic phy-meson8b-usb2 to get host only mode working on Meson8
*) Add fix in Cadence phy-cadence-sierra to get USB3 device disconnect issue
*) Convert meson8b-usb2-phy, qcom-qmp-phy, rcar-gen3-phy-usb2 and
rcar-gen3-phy-usb3 device tree binding to YAML schema
*) Minor fixes and cleanups in phy-cpcap-usb, j721e-wiz, omap-usb2,
phy-bcm-sr-usb, phy-brcm-usb PHY driver
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* tag 'phy-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (43 commits)
phy: intel: Add driver support for ComboPhy
dt-bindings: phy: Add YAML schemas for Intel ComboPhy
dt-bindings: phy: Add PHY_TYPE_XPCS definition
phy: qcom-qmp: Add QMP V3 USB3 PHY support for SC7180
dt-bindings: phy: qcom,qmp-usb3-dp: Add support for SC7180
dt-bindings: phy: qcom,qmp-usb3-dp: Add dt bindings for USB3 DP PHY
dt-bindings: phy: qcom,qmp: Convert QMP PHY bindings to yaml
phy: cadence: sierra: Fix for USB3 U1/U2 state
phy: ti: am654: add support for USB super-speed
phy: ti: am654: show up in regmap debugfs
drivers: phy: sr-usb: do not use internal fsm for USB2 phy init
dt-bindings: phy: renesas: usb3-phy: add r8a77961 support
dt-bindings: phy: renesas: usb3-phy: convert bindings to json-schema
dt-bindings: phy: renesas: usb2-phy: add r8a77961 support
dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema
phy: qcom-qmp: Ensure register indirection arrays initialized
phy: omap-usb2: Clean up exported header
phy: phy-bcm-ns2-usbdrd: Constify phy_ops
phy: phy-brcm-usb: Constify static structs
phy: sr-usb: Constify phy_ops
...
This contains sdw_master_device patches and other updates done by Intel
folks.
Details:
- sdw_master_device to represent the master instances.
- sysfs properties for sdw_master_device and sdw_slave.
- Documentation update for TDM modes.
- some code cleanup patches and odd updates.
-----BEGIN PGP SIGNATURE-----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=5MsU
-----END PGP SIGNATURE-----
Merge tag 'soundwire-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next
Vinod writes:
soundwire updates for v5.8-rc1
This contains sdw_master_device patches and other updates done by Intel
folks.
Details:
- sdw_master_device to represent the master instances.
- sysfs properties for sdw_master_device and sdw_slave.
- Documentation update for TDM modes.
- some code cleanup patches and odd updates.
* tag 'soundwire-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel: use a single module
soundwire: fix spelling mistake
soundwire: fix trailing line in sysfs_slave.c
soundwire: add Slave sysfs support
soundwire: master: add sysfs support
soundwire: disco: s/ch/channels/
soundwire: master: add runtime pm support
soundwire: bus_type: add sdw_master_device support
soundwire: bus: add unique bus id
soundwire: bus_type: introduce sdw_slave_type and sdw_master_type
soundwire: bus: rename sdw_bus_master_add/delete, add arguments
soundwire: intel: (cosmetic) remove multiple superfluous "else" statements
soundwire: (cosmetic) remove multiple superfluous "else" statements
soundwire: qcom: Use IRQF_ONESHOT
soundwire: bus: reduce verbosity on enumeration
soundwire: debugfs: clarify SDPX license with GPL-2.0-only
soundwire: slave: don't init debugfs on device registration error
Documentation: SoundWire: clarify TDM mode support
soundwire: qcom: fix error handling in probe
soundwire: intel: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
These are the interconnect changes for the 5.8-rc1 merge window:
Core changes:
- Convert the framework core from tristate to bool to make handling
dependencies between other core frameworks easier
- Add of_icc_get_by_index()
- Add devm_of_icc_get() helper function
- Add icc_enable() and icc_disable() helpers
New drivers:
- Platform driver for NXP i.MX8MM SoC
- Platform driver for NXP i.MX8MN SoC
- Platform driver for NXP i.MX8MQ SoC
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
-----BEGIN PGP SIGNATURE-----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=+f9u
-----END PGP SIGNATURE-----
Merge tag 'icc-5.8-rc1' of https://git.linaro.org/people/georgi.djakov/linux into char-misc-next
Georgi writes:
interconnect changes for 5.8
These are the interconnect changes for the 5.8-rc1 merge window:
Core changes:
- Convert the framework core from tristate to bool to make handling
dependencies between other core frameworks easier
- Add of_icc_get_by_index()
- Add devm_of_icc_get() helper function
- Add icc_enable() and icc_disable() helpers
New drivers:
- Platform driver for NXP i.MX8MM SoC
- Platform driver for NXP i.MX8MN SoC
- Platform driver for NXP i.MX8MQ SoC
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
* tag 'icc-5.8-rc1' of https://git.linaro.org/people/georgi.djakov/linux:
interconnect: Remove unused module exit code from core
interconnect: Disallow interconnect core to be built as a module
interconnect: Add of_icc_get_by_index() helper function
interconnect: Add helpers for enabling/disabling a path
interconnect: imx: Fix return value check in imx_icc_node_init_qos()
interconnect: imx: Add platform driver for imx8mn
interconnect: imx: Add platform driver for imx8mq
interconnect: imx: Add platform driver for imx8mm
interconnect: Add imx core driver
dt-bindings: interconnect: Add bindings for imx8m noc
interconnect: Add devm_of_icc_get() as exported API for users
Anson Huang