The Makefile contains the variables needed for the driver to build.
The Makefile.inc isn't needed.
Signed-off-by: Lidza Louina <lidza.louina@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As result of patches
staging: vt6656: rxtx.c: s_uGetDataDuration remove First Frag or Mid Frag dead code
staging: vt6656: rxtx.c: s_uGetDataDuration remove dead variables.
variables uFragIdx, cbLastFragmentSize, uMACfragNum are dead.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As result of patch
staging: vt6656: rxtx.c s_uGetDataDuration remove First Frag or Mid Frag dead code.
cbFrameLength, wRate, uFragIdx, cbLastFragmentSize, uMACfragNum, byFBOption are
dead variables.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[1] introduced down_write in zram_slot_free_notify to prevent race
between zram_slot_free_notify and zram_bvec_[read|write]. The race
could happen if somebody who has right permission to open swap device
is reading swap device while it is used by swap in parallel.
However, zram_slot_free_notify is called with holding spin_lock of
swap layer so we shouldn't avoid holing mutex. Otherwise, lockdep
warns it.
This patch adds new list to handle free slot and workqueue
so zram_slot_free_notify just registers slot index to be freed and
registers the request to workqueue. If workqueue is expired,
it holds mutex_lock so there is no problem any more.
If any I/O is issued, zram handles pending slot-free request
caused by zram_slot_free_notify right before handling issued
request because workqueue wouldn't be expired yet so zram I/O
request handling function can miss it.
Lastly, when zram is reset, flush_work could handle all of pending
free request so we shouldn't have memory leak.
NOTE: If zram_slot_free_notify's kmalloc with GFP_ATOMIC would be
failed, the slot will be freed when next write I/O write the slot.
[1] [57ab0485, zram: use zram->lock to protect zram_free_page()
in swap free notify path]
* from v2
* refactoring
* from v1
* totally redesign
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[1] tried to fix invalid memory access on zram->disk but it didn't
fix properly because get_disk failed during module exit path.
Actually, we don't need to reset zram->disk's capacity to zero
in module exit path so that this patch introduces new argument
"reset_capacity" on zram_reset_divice and it only reset it when
reset_store is called.
[1] 6030ea9b, zram: avoid invalid memory access in zram_exit()
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reorder the kernel doc comments for 'struct dwc2_core_params' to
match the ordering in the struct itself. Reorder the members of
'struct dwc2_qh' (and its kerneldoc comments) to minimize the
amount of structure padding.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed a coding style issue of 80 character per line.
Signed-off-by: Andreas Werner <wernerandy@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed the unneeded SBE_INCLUDE_SYMBOLS #define, and the associated STATIC
#define, and replaced all occurances of STATIC with 'static'. This was in
response to sparse warnings of the form "symbol 'XYZ' was not declared. Should
it be static?".
Removed a function prototype (musycc_init_port) as adding the 'static'
declaration produced a new gcc warning. (musycc_init_port is only declared if
SBE_WAN256T3_ENABLE is set)
Signed-off-by: Shaun Laing <shaun@xresource.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Checking the return of dev_alloc_skb as stated in the following bug:
https://bugzilla.kernel.org/show_bug.cgi?id=60401
Reported-by: RUC_Soft_Sec rucsoftsec@gmail.com
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the drivers with simple, per channel programmable i/o, to use the
comedi_dio_insn_config() helper function.
All of these pass a 'mask' of '0' to comedi_dio_insn_config() this causes
the per channel mask to be used to configure the i/o direction.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert this driver to use the comedi_dio_insn_config() helper function.
Tidy up the comments to reflect the new code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DIO subdevices always handle the INSN_CONFIG_DIO_{INPUT,OUTPUT} instructions
to configure the DIO channels. They also always handle the INSN_CONFIG_DIO_QUERY
instruction to query the configuration of a DIO channel.
Introduce a helper function to handle the (*insn_config) boilerplate for
comedi DIO subdevices. This function has the same paramters as (*insn_config)
functions with an additional parameter to allow the caller to pass a 'mask'
value for grouped DIO channels.
This function returns:
0 if the instruction was successful but requires additional handling by
the caller (INSN_CONFIG_DIO_{INPUT,OUTPUT}
insn->n if the instruction was handled (INSN_CONFIG_DIO_QUERY)
-EINVAL for all unhandled instructions
The caller is responsible for actually configuring the hardware based on
the configuration (s->io_bits).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 42ef678bef.
It's incorrect as well... time for more coffee...
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 4f76463d3b.
I applied an incorrect version here as well :(
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the drivers with complex, port programmable i/o, to use the
comedi_dio_insn_config() helper function.
All of these drivers have some sort of 'port' programmable i/o where multiple
i/o channels are configured as a group. The 'mask' associated with the group
is passed to comedi_dio_insn_config() so that all the channels are configured.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To get the name of a file from a pathname we may use kbasename() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit f21c53945c.
I applied the wrong patch :(
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
zcache is obsolete and not used anymore, Bob Liu has rewritten it and is
submitting it for inclusion through the main -mm tree, as it should have
been done in the first place...
Cc: Bob Liu <lliubbo@gmail.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the drivers with complex, port programmable i/o, to use the
comedi_dio_insn_config() helper function.
All of these drivers have some sort of 'port' programmable i/o where multiple
i/o channels are configured as a group. The 'mask' associated with the group
is passed to comedi_dio_insn_config() so that all the channels are configured.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert this driver to use the comedi_dio_insn_config() helper function.
Tidy up the comments to reflect the new code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DIO subdevices always handle the INSN_CONFIG_DIO_{INPUT,OUTPUT} instructions
to configure the dio channels. They also always handle the INSN_CONFIG_DIO_QUERY
instruction to query the configuration of a dio channel.
Introduce a helper function to handle the (*insn_config) boilerplate for
comedi DIO subdevices. This function has the same parameters as (*insn_config)
functions with an additional parameter to allow the caller to pass a 'mask'
value for grouped dio channels.
This function returns:
0 if the instruction was successful but requires additional handling by
the caller (INSN_CONFIG_DIO_{INPUT,OUTPUT}
insn->n if the instruction was handled (INSN_CONFIG_DIO_QUERY)
-EINVAL for all unhandled instructions
The caller is responsible for actually configuring the hardware based on
the configuration (s->io_bits).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace structures with struct ieee80211_cts data
typedef struct tagSCTSData include extra packing wReserved
not in struct ieee80211_cts
This is corrected by adding reserved2 to the structures.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
memset to 0 structure _USB_SEND_CONTEXT pContext->Data to its
size of MAX_TOTAL_SIZE_WITH_ALL_HEADERS as defined
in device.h
This removes the need for memset in the TX path.
It also allows the removal of dead structure
TX_BUFFER_CONTAINER BufferHeader;
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a bug where we were not returning correct hub status
for 8th port.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure that we reset port configuration no. when PD departs.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Deleted an extern function that wasn't used in this driver.
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prototype of a function added to the header to avoid the use of extern.
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
White space deleted before a semicolon.
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed issue by removing Space before semicolon
Signed-off-by: Kumar Gaurav <kumargauravgupta3@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andres Salomon and Chris Ball are not longer at OLPC.
Daniel Drake is the new OLPC go-to guy. And I wanna
also be CC'd on DCON and other OLPC patches.
Signed-off-by: Jens Frederich <jfrederich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fix following issues reported by Dan:-
1) There is no check limiting the size to 32 and it could be up to
253 bytes.
2) Use defines instead of magic numbers.
3) The oz_farewell struct is supposed to be a variable length struct
but the variable part is put in the middle. It doesn't make any
sense to put the length of the variable size array after then end
of the array because we can never find it again! Put the
variable size array at the end. Make it a zero length array.
u8 len;
u8 report[0];
4) In oz_add_farewell() we do this:
f = kmalloc(sizeof(struct oz_farewell) + len - 1, GFP_ATOMIC);
The "- 1" refers to sizeof(f->report) but because it was a magic
number then it was missed when the sizeof(f->report) changed.
5) In [patch 6/6] we set the ->len member. But because it is at the
end of a variable length array with no limit check the remote
attacker can just rewrite it using the memcpy() on the next line.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes following build warning.
drivers/built-in.o: In function `oz_hcd_heartbeat':
>> (.text+0x30aadd): undefined reference to `__divdi3'
drivers/built-in.o: In function `oz_hcd_heartbeat':
>> (.text+0x30ac85): undefined reference to `__divdi3'
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is three bug fixes: An fnic warning caused by sleeping under a lock, a
major regression with our updated WRITE SAME/UNMAP logic which caused tons of
USB devices (and one RAID card) to cease to function and a megaraid_sas
firmware initialisation problem which causes kdump failures.
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQEcBAABAgAGBQJSB/4vAAoJEDeqqVYsXL0MUzcH/iSBLSozc1ofWxaDuOvnKHwU
3bi4hjwMXMw34BSno99F078uJK4Rt/gbySY60CxwuujmVRjwebSxSCrkmyrPQ9rs
8m2U2dtBGmyecSChWWbr8YAnA6AP3cFLxv97pkrIxbakdG7luGUVsAK+SgyehsRg
CxPIwG1vk4sl5yQ72eKTRwiFkCuIUoqTrlXjf8Qgfm02SJbYc2RWfZODW+bUB81x
tE4NsRlcJ9QnhhOBzzayczJx2qh/1eCpEyENt9XGamzcoy94yRdmfusdNoA6alIx
CLFAkCgmnVamEuF5EMLh4mYv9yYYblvdR4IUKxX8bY12eNPYTHUyt0iAXpzqjcU=
=CGF3
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is three bug fixes: An fnic warning caused by sleeping under a
lock, a major regression with our updated WRITE SAME/UNMAP logic which
caused tons of USB devices (and one RAID card) to cease to function
and a megaraid_sas firmware initialisation problem which causes kdump
failures"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] Don't attempt to send extended INQUIRY command if skip_vpd_pages is set
[SCSI] fnic: BUG: sleeping function called from invalid context during probe
[SCSI] megaraid_sas: megaraid_sas driver init fails in kdump kernel
Pull i2c fixes from Wolfram Sang:
"Some driver bugfixes for the I2C subsystem"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mv64xxx: Document the newly introduced allwinner compatible
i2c: Fix Kontron PLD prescaler calculation
i2c: i2c-mxs: Use DMA mode even for small transfers
Here are 3 small fixes for staging/IIO drivers for 3.11-rc5. Nothing
huge, two IIO driver fixes, and a zcache fix. All of these have been in
linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlIFf+8ACgkQMUfUDdst+ylosQCgizsNrX32xvvUdK7xbQUx9SuZ
Gl4An097mknKhrqpfx2DJtRyq13tuyO/
=HMDZ
-----END PGP SIGNATURE-----
Merge tag 'staging-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are 3 small fixes for staging/IIO drivers for 3.11-rc5. Nothing
huge, two IIO driver fixes, and a zcache fix. All of these have been
in linux-next for a while"
* tag 'staging-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: zcache: fix "zcache=" kernel parameter
iio: ti_am335x_adc: Fix wrong samples received on 1st read
iio:trigger: Fix use_count race condition
Here are 3 small USB fixes for 3.11-rc5.
One is a fix that the ChromeOS developers ran into on some Intel
hardware, one is a build fix, and the last is a MAINTAINERS update to
help people figure out where to send USB network driver patches.
All of these have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlIFgIgACgkQMUfUDdst+ym8fACcCrEVU8L7i3ro9IVw62vJ2Ale
JcQAoIzTKRL49s8Sc69BPLAqmf0AnXM+
=HFLv
-----END PGP SIGNATURE-----
Merge tag 'usb-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are 3 small USB fixes for 3.11-rc5.
One is a fix that the ChromeOS developers ran into on some Intel
hardware, one is a build fix, and the last is a MAINTAINERS update to
help people figure out where to send USB network driver patches.
All of these have been in linux-next for a while"
* tag 'usb-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
MAINTAINERS: Add separate section for USB NETWORKING DRIVERS
usb: xhci: add missing dma-mapping.h includes
usb: core: don't try to reset_device() a port that got just disconnected
- ACPI-based memory hotplug stopped working after a recent change,
because it's not possible to associate sufficiently many "physical"
devices with one ACPI device object due to an artificial limit.
Fix from Rafael J Wysocki removes that limit and makes memory
hotplug work again.
- A change made in 3.9 uncovered a bug in the ACPI processor driver
preventing NUMA nodes from being put offline due to an ordering
issue. Fix from Yasuaki Ishimatsu changes the ordering to make
things work again.
- One of the recent ACPI video commits (that hasn't been reverted
so far) uncovered a bug in the code handling quirky BIOSes that
caused some Asus machines to boot with backlight completely off
which made it quite difficult to use them afterward. Fix from
Felipe Contreras improves the quirk to cover this particular
case correctly.
- A cpufreq user space interface change made in 3.10 inadvertently
renamed the ignore_nice_load sysfs attribute to ignore_nice which
resulted in some confusion. Fix from Viresh Kumar changes the name
back to ignore_nice_load.
- An initialization ordering change made in 3.9 broke cpufreq on
loongson2 boards. Fix from Aaro Koskinen restores the correct
initialization ordering there.
- Fix breakage resulting from a mistake made in 3.9 and causing the
detection of some graphics adapters (that were detected correctly
before) to fail. There are two objects representing the same PCIe
port in the affected systems' ACPI tables and both appear as
"enabled" and we are expected to guess which one to use. We used
to choose the right one before by pure luck, but when we tried to
address another similar corner case, the luck went away. This time
we try to make our guessing a bit more educated which is reported
to work on those systems.
- The /proc/acpi/wakeup interface code is missing some locking
which may lead to breakage if that file is written or read during
hotplug of wakeup devices. That should be rare but still possible,
so it's better to start using the appropriate locking there.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=0u8M
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
- ACPI-based memory hotplug stopped working after a recent change,
because it's not possible to associate sufficiently many "physical"
devices with one ACPI device object due to an artificial limit. Fix
from Rafael J Wysocki removes that limit and makes memory hotplug
work again.
- A change made in 3.9 uncovered a bug in the ACPI processor driver
preventing NUMA nodes from being put offline due to an ordering
issue. Fix from Yasuaki Ishimatsu changes the ordering to make
things work again.
- One of the recent ACPI video commits (that hasn't been reverted so
far) uncovered a bug in the code handling quirky BIOSes that caused
some Asus machines to boot with backlight completely off which made
it quite difficult to use them afterward. Fix from Felipe Contreras
improves the quirk to cover this particular case correctly.
- A cpufreq user space interface change made in 3.10 inadvertently
renamed the ignore_nice_load sysfs attribute to ignore_nice which
resulted in some confusion. Fix from Viresh Kumar changes the name
back to ignore_nice_load.
- An initialization ordering change made in 3.9 broke cpufreq on
loongson2 boards. Fix from Aaro Koskinen restores the correct
initialization ordering there.
- Fix breakage resulting from a mistake made in 3.9 and causing the
detection of some graphics adapters (that were detected correctly
before) to fail. There are two objects representing the same PCIe
port in the affected systems' ACPI tables and both appear as
"enabled" and we are expected to guess which one to use. We used to
choose the right one before by pure luck, but when we tried to
address another similar corner case, the luck went away. This time
we try to make our guessing a bit more educated which is reported to
work on those systems.
- The /proc/acpi/wakeup interface code is missing some locking which
may lead to breakage if that file is written or read during hotplug
of wakeup devices. That should be rare but still possible, so it's
better to start using the appropriate locking there.
* tag 'pm+acpi-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: Try harder to resolve _ADR collisions for bridges
cpufreq: rename ignore_nice as ignore_nice_load
cpufreq: loongson2: fix regression related to clock management
ACPI / processor: move try_offline_node() after acpi_unmap_lsapic()
ACPI: Drop physical_node_id_bitmap from struct acpi_device
ACPI / PM: Walk physical_node_list under physical_node_lock
ACPI / video: improve quirk check in acpi_video_bqc_quirk()
Pull media fixes from Mauro Carvalho Chehab:
"Some driver fixes (em28xx, coda, usbtv, s5p, hdpvr and ml86v7667) and
a fix for media DocBook"
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] em28xx: fix assignment of the eeprom data
[media] hdpvr: fix iteration over uninitialized lists in hdpvr_probe()
[media] usbtv: fix dependency
[media] usbtv: Throw corrupted frames away
[media] usbtv: Fix deinterlacing
[media] v4l2: added missing mutex.h include to v4l2-ctrls.h
[media] DocBook: upgrade media_api DocBook version to 4.2
[media] ml86v7667: fix compile warning: 'ret' set but not used
[media] s5p-g2d: Fix registration failure
[media] media: coda: Fix DT driver data pointer for i.MX27
[media] s5p-mfc: Fix input/output format reporting
Pull HID fix from Jiri Kosina:
"Revert of a patch which breaks enumeration workaround in
hid-logitech-dj"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
Revert "HID: hid-logitech-dj: querying_devices was never set"
- omapdss: compilation fix and DVI fix for PandaBoard
- mxsfb: fix colors when using 18bit LCD bus
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=bHE/
-----END PGP SIGNATURE-----
Merge tag 'fbdev-fixes-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux
Pull fbdev fixes from Tomi Valkeinen:
- omapdss: compilation fix and DVI fix for PandaBoard
- mxsfb: fix colors when using 18bit LCD bus
* tag 'fbdev-fixes-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
ARM: OMAP: dss-common: fix Panda's DVI DDC channel
video: mxsfb: fix color settings for 18bit data bus and 32bpp
OMAPDSS: analog-tv-connector: compile fix
Pull drm fixes from Dave Airlie:
"Mostly radeon, more fixes for dynamic power management which is is off
by default for this release anyways, but there are a large number of
testers, so I'd like to keep merging the fixes.
Otherwise, radeon UVD fixes affecting suspend/resume regressions, i915
regression fixes, one for your mac mini, ast, mgag200, cirrus ttm fix
and one regression fix in the core"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (25 commits)
drm: Don't pass negative delta to ktime_sub_ns()
drm/radeon: make missing smc ucode non-fatal
drm/radeon/dpm: require rlc for dpm
drm/radeon/cik: use a mutex to properly lock srbm instanced registers
drm/radeon: remove unnecessary unpin
drm/radeon: add more UVD CS checking
drm/radeon: stop sending invalid UVD destroy msg
drm/radeon: only save UVD bo when we have open handles
drm/radeon: always program the MC on startup
drm/radeon: fix audio dto calculation on DCE3+ (v3)
drm/radeon/dpm: disable sclk ss on rv6xx
drm/radeon: fix halting UVD
drm/radeon/dpm: adjust power state properly for UVD on SI
drm/radeon/dpm: fix spread spectrum setup (v2)
drm/radeon/dpm: adjust thermal protection requirements
drm/radeon: select audio dto based on encoder id for DCE3
drm/radeon: properly handle pm on gpu reset
drm/i915: do not disable backlight on vgaswitcheroo switch off
drm/i915: Don't call encoder's get_config unless encoder is active
drm/i915: avoid brightness overflow when doing scale
...
This reverts commit 407a2c2a4d.
Explanation provided by Benjamin Tissoires:
Commit "HID: hid-logitech-dj, querying_devices was never set" activate
a flag which guarantees that we do not ask the receiver for too many
enumeration. When the flag is set, each following enumeration call is
discarded (the usb request is not forwarded to the receiver). The flag
is then released when the driver receive a pairing information event,
which normally follows the enumeration request.
However, the USB3 bug makes the driver think the enumeration request
has been forwarded to the receiver. However, it is actually not the
case because the USB stack returns -EPIPE. So, when a new unknown
device appears, the workaround consisting in asking for a new
enumeration is not working anymore: this new enumeration is discarded
because of the flag, which is never reset.
A solution could be to trigger a timeout before releasing it, but for
now, let's just revert the patch.
Reported-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Tested-by: Sune Mølgaard <sune@molgaard.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Daniel writes:
A few bugfixes for serious stuff and regressions. Highlight is the
reinstated hack to keep the i915 backlight on when running on an optimus
machine, this prevents black screens especially with some radeon muxed
platforms. And the patch to quiet dmesg on Linus' old mac mini ;-)
* tag 'drm-intel-fixes-2013-08-08' of git://people.freedesktop.org/~danvet/drm-intel:
drm/i915: do not disable backlight on vgaswitcheroo switch off
drm/i915: Don't call encoder's get_config unless encoder is active
drm/i915: avoid brightness overflow when doing scale
drm/i915: update last_vblank when disabling the power well
drm/i915: fix gen4 digital port hotplug definitions
In adt7470_write_word_data(), which writes two bytes using
i2c_smbus_write_byte_data(), the return codes are incorrectly AND-ed
together when they should be OR-ed together.
The return code of i2c_smbus_write_byte_data() is zero for success.
The upshot is only the first byte was ever written to the hardware.
The 2nd byte was never written out.
I noticed that trying to set the fan speed limits was not working
correctly on my system. Setting the fan speed limits is the only
code that uses adt7470_write_word_data(). After making the change
the limit settings work and the alarms work also.
Signed-off-by: Curt Brune <curt@cumulusnetworks.com>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Two things here, one is a fix for a nasty issue where we were failing to
sync the last register in a block when using raw writes and the other
fixes a missing header for the !REGMAP stubs so that we don't rely on
implicit includes in that case.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=OFAa
-----END PGP SIGNATURE-----
Merge tag 'regmap-v3.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"Two things here, one is a fix for a nasty issue where we were failing
to sync the last register in a block when using raw writes and the
other fixes a missing header for the !REGMAP stubs so that we don't
rely on implicit includes in that case"
* tag 'regmap-v3.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Add missing header for !CONFIG_REGMAP stubs
regmap: cache: Make sure to sync the last register in a block
Just one update for SPI, a simple fix to the davinci driver to correct
the direction for which DMA is mapped following the dmaengine
conversion.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=zVk5
-----END PGP SIGNATURE-----
Merge tag 'spi-v3.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"Just one update for SPI, a simple fix to the davinci driver to correct
the direction for which DMA is mapped following the dmaengine
conversion"
* tag 'spi-v3.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-davinci: Fix direction in dma_map_single()
and all CC:stable..
Thanks,
Rusty.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=ZV9B
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull virtio fixes from Rusty Russell:
"More virtio console fixes than I'm happy with, but all real issues,
and all CC:stable.."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
virtio-scsi: Fix virtqueue affinity setup
virtio: console: return -ENODEV on all read operations after unplug
virtio: console: fix raising SIGIO after port unplug
virtio: console: clean up port data immediately at time of unplug
virtio: console: fix race in port_fops_open() and port unplug
virtio: console: fix race with port unplug and open/close
virtio/console: Add pipe_lock/unlock for splice_write
virtio/console: Quit from splice_write if pipe->nrbufs is 0
It takes an unsigned value. This happens not to blow up on 64-bit
architectures, but it does on 32-bit, causing
drm_calc_vbltimestamp_from_scanoutpos() to calculate totally bogus
timestamps for vblank events. Which in turn causes e.g. gnome-shell to
hang after a DPMS off cycle with current xf86-video-ati Git.
[airlied: regression introduced in drm: use monotonic time in drm_calc_vbltimestamp_from_scanoutpos]
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59339
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59836
Tested-by: shui yangwei <yangweix.shui@intel.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Some more radeon fixes. Mostly dpm and uvd fixes. Fixes hangs
with dpm on more rv6xx asics, and fixes suspend and resume with UVD.
* 'drm-fixes-3.11' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: make missing smc ucode non-fatal
drm/radeon/dpm: require rlc for dpm
drm/radeon/cik: use a mutex to properly lock srbm instanced registers
drm/radeon: remove unnecessary unpin
drm/radeon: add more UVD CS checking
drm/radeon: stop sending invalid UVD destroy msg
drm/radeon: only save UVD bo when we have open handles
drm/radeon: always program the MC on startup
drm/radeon: fix audio dto calculation on DCE3+ (v3)
drm/radeon/dpm: disable sclk ss on rv6xx
drm/radeon: fix halting UVD
drm/radeon/dpm: adjust power state properly for UVD on SI
drm/radeon/dpm: fix spread spectrum setup (v2)
drm/radeon/dpm: adjust thermal protection requirements
drm/radeon: select audio dto based on encoder id for DCE3
drm/radeon: properly handle pm on gpu reset
The smc ucode is required for dpm (dynamic power
management), but if it's missing just skip dpm setup
and don't disable acceleration.
Should fix:
https://bugs.freedesktop.org/show_bug.cgi?id=67876
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The rlc is required for dpm to work properly, so if
the rlc ucode is missing, don't enable dpm. Enabling
dpm without the rlc enabled can result in hangs.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We don't pin the BO on allocation, so don't unpin it on free.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Improve error handling in case userspace sends us
an invalid command buffer.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We also need to check the handle.
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise just reinitialize from scratch on resume,
and so make it more likely to succeed.
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For r6xx+ asics. This mirrors the behavior of pre-r6xx
asics. We need to program the MC even if something
else in startup() fails. Failure to do so results in
an unusable GPU.
Based on a fix from: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Need to set the wallclock ratio and adjust the phase
and module registers appropriately. May fix problems
with audio timing at certain display timings.
v2: properly handle clocks below 24mhz
v3: rebase r600 changes
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Removing the clock/power or resetting the VCPU can cause
hangs if that happens in the middle of a register write.
Stall the memory and register bus before putting the VCPU
into reset. Keep it in reset when unloading the module or
suspending.
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are some hardware issue with reclocking on SI when
UVD is active, so use a stable power state when UVD is
active. Fixes possible hangs and performance issues when
using UVD on SI.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to check for engine and memory clock ss separately
and only enable dynamic ss if either of them are found.
This should fix systems which have a ss table, but do
not have entries for engine or memory. On those systems
we may enable dynamic spread spectrum without enabling
it on the engine or memory clocks which can lead to a
hang in some cases.
fixes some systems reported here:
https://bugs.freedesktop.org/show_bug.cgi?id=66963
v2: fix typo
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On rv770 and newer, clock gating is not required
for thermal protection. The only requirement is that
the design utilizes a thermal sensor.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are two audio dtos on radeon asics that you can
select between. Normally, dto0 is used for hdmi and
dto1 for DP, but it seems that the dto is somehow
tied to the encoders on DCE3 asics.
fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=67435
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
When we reset the GPU, we need to properly tear
down power management before reseting the GPU and then
set it back up again after reset. Add the missing
radeon_pm_[suspend|resume] calls to the gpu reset
function.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In theory, under a given ACPI namespace node there should be only
one child device object with _ADR whose value matches a given bus
address exactly. In practice, however, there are systems in which
multiple child device objects under a given parent have _ADR matching
exactly the same address. In those cases we use _STA to determine
which of the multiple matching devices is enabled, since some systems
are known to indicate which ACPI device object to associate with the
given physical (usually PCI) device this way.
Unfortunately, as it turns out, there are systems in which many
device objects under the same parent have _ADR matching exactly the
same bus address and none of them has _STA, in which case they all
should be regarded as enabled according to the spec. Still, if
those device objects are supposed to represent bridges (e.g. this
is the case for device objects corresponding to PCIe ports), we can
try harder and skip the ones that have no child device objects in the
ACPI namespace. With luck, we can avoid using device objects that we
are not expected to use this way.
Although this only works for bridges whose children also have ACPI
namespace representation, it is sufficient to address graphics
adapter detection issues on some systems, so rework the code finding
a matching device ACPI handle for a given bus address to implement
this idea.
Introduce a new function, acpi_find_child(), taking three arguments:
the ACPI handle of the device's parent, a bus address suitable for
the device's bus type and a bool indicating if the device is a
bridge and make it work as outlined above. Reimplement the function
currently used for this purpose, acpi_get_child(), as a call to
acpi_find_child() with the last argument set to 'false' and make
the PCI subsystem use acpi_find_child() with the bridge information
passed as the last argument to it. [Lan Tianyu notices that it is
not sufficient to use pci_is_bridge() for that, because the device's
subordinate pointer hasn't been set yet at this point, so use
hdr_type instead.]
This change fixes a regression introduced inadvertently by commit
33f767d (ACPI: Rework acpi_get_child() to be more efficient) which
overlooked the fact that for acpi_walk_namespace() "post-order" means
"after all children have been visited" rather than "on the way back",
so for device objects without children and for namespace walks of
depth 1, as in the acpi_get_child() case, the "post-order" callbacks
ordering is actually the same as the ordering of "pre-order" ones.
Since that commit changed the namespace walk in acpi_get_child() to
terminate after finding the first matching object instead of going
through all of them and returning the last one, it effectively
changed the result returned by that function in some rare cases and
that led to problems (the switch from a "pre-order" to a "post-order"
callback was supposed to prevent that from happening, but it was
ineffective).
As it turns out, the systems where the change made by commit
33f767d actually matters are those where there are multiple ACPI
device objects representing the same PCIe port (which effectively
is a bridge). Moreover, only one of them, and the one we are
expected to use, has child device objects in the ACPI namespace,
so the regression can be addressed as described above.
References: https://bugzilla.kernel.org/show_bug.cgi?id=60561
Reported-by: Peter Wu <lekensteyn@gmail.com>
Tested-by: Vladimir Lalov <mail@vlalov.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: 3.9+ <stable@vger.kernel.org> # 3.9+
This sysfs file was called ignore_nice_load earlier and commit
4d5dcc4 (cpufreq: governor: Implement per policy instances of
governors) changed its name to ignore_nice by mistake.
Lets get it renamed back to its original name.
Reported-by: Martin von Gagern <Martin.vGagern@gmx.net>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 42913c799 (MIPS: Loongson2: Use clk API instead of direct
dereferences) broke the cpufreq functionality on Loongson2 boards:
clk_set_rate() is called before the CPU frequency table is
initialized, and therefore will always fail.
Fix by moving the clk_set_rate() after the table initialization.
Tested on Lemote FuLoong mini-PC.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 3.9+ <stable@vger.kernel.org> # 3.9+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
try_offline_node() checks that all CPUs associated with the given
node have been removed by using cpu_present_bits. If all cpus
related to that node have been removed, try_offline_node() clears
the node information.
However, try_offline_node() called from acpi_processor_remove() never
clears the node information. For disabling cpu_present_bits,
acpi_unmap_lsapic() needs be called. Yet, acpi_unmap_lsapic() is
called after try_offline_node() has run. So when try_offline_node()
runs, the CPU's cpu_present_bits is always set.
Fix the issue by moving try_offline_node() after acpi_unmap_lsapic().
The problem fixed here was uncovered by commit cecdb19 "ACPI / scan:
Change the implementation of acpi_bus_trim()".
[rjw: Changelog]
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Cc: 3.9+ <stable@vger.kernel.org> # 3.9+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On muxed systems, the other vgaswitcheroo client may depend on i915 to
handle the backlight. We began switching off the backlight since
commit a261b246eb
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Jul 26 19:21:47 2012 +0200
drm/i915: disable all crtcs at suspend time
breaking backlight on discreet graphics in (some) muxed systems.
Keep the backlight on when the state is changed through vgaswitcheroo.
Note: The alternative would be to add a quirk table to achieve the same
based on system identifiers, but AFAICS it would asymptotically approach
effectively the same as this patch as more IDs are added, but with the
maintenance burden of the quirk table.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=55311
Tested-by: Fede <fedevx@yahoo.com>
Tested-by: Aximab <laurent.debian@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59785
Tested-by: sfievet <sebastien.fievet@free.fr>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The SDVO code tries to compare the encoder's and crtc's idea of the
pixel_multiplier. Normally they have to match, but when transitioning
to DPMS off, we turn off the pipe before reading out the pipe_config,
so the pixel_multiplier in the pipe_config will be 0, whereas the
encoder will still have its pixel_multiplier set to whatever value we
were using when the display was active. This leads to a warning
from intel_modeset_check_state().
WARNING: CPU: 1 PID: 2846 at drivers/gpu/drm/i915/intel_sdvo.c:1378 intel_sdvo_get_config+0x158/0x160()
SDVO pixel multiplier mismatch, port: 0, encoder: 1
Modules linked in: snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep
CPU: 1 PID: 2846 Comm: Xorg Not tainted 3.11.0-rc3-00208-gbe1e8d7-dirty #19
Hardware name: Apple Computer, Inc. Macmini1,1/Mac-F4208EC8, BIOS MM11.88Z.0055.B03.0604071521 04/07/06
00000000 00000000 ef0afa54 c1597bbb c1737ea4 ef0afa84 c10392ca c1737e6c
ef0afab0 00000b1e c1737ea4 00000562 c12dfbe8 c12dfbe8 ef0afb14 00000000
f697ec00 ef0afa9c c103936e 00000009 ef0afa94 c1737e6c ef0afab0 ef0afadc
Call Trace:
[<c1597bbb>] dump_stack+0x41/0x56
[<c10392ca>] warn_slowpath_common+0x7a/0xa0
[<c103936e>] warn_slowpath_fmt+0x2e/0x30
[<c12dfbe8>] intel_sdvo_get_config+0x158/0x160
[<c12c3220>] check_crtc_state+0x1e0/0xb10
[<c12cdc7d>] intel_modeset_check_state+0x29d/0x7c0
[<c12dfe5c>] intel_sdvo_dpms+0x5c/0xa0
[<c12985de>] drm_mode_obj_set_property_ioctl+0x40e/0x420
[<c1298625>] drm_mode_connector_property_set_ioctl+0x35/0x40
[<c1289294>] drm_ioctl+0x3e4/0x540
[<c10fc1a2>] do_vfs_ioctl+0x72/0x570
[<c10fc72f>] SyS_ioctl+0x8f/0xa0
[<c159b7fa>] sysenter_do_call+0x12/0x22
---[ end trace 7ce940aff1366d60 ]---
Fix the problem by skipping the encoder get_config() function for
inactive encoders.
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Some card's max brightness level is pretty large, e.g. on Acer Aspire
4732Z, the max level is 989910. If user space set a large enough level
then the current scale done in intel_panel_set_backlight will cause an
integer overflow and the scaled level will be mistakenly small, leaving
user with an almost black screen. This patch fixes this problem.
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
[danvet: Add a comment to explain what's going on.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The DRM layer keeps track of our vblanks and it assumes our vblank
counters only go back to zero when they overflow. The problem is that
when we disable the power well our counters also go to zero, but it
doesn't mean they did overflow. So on this patch we grab the lock and
update last_vblank so the DRM layer won't think our counters
overflowed.
This patch fixes the following intel-gpu-tools test:
./kms_flip --run-subtest blocking-absolute-wf_vblank
Regression introduced by the following commit:
commit bf51d5e2cd
Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
Date: Wed Jul 3 17:12:13 2013 -0300
drm/i915: switch disable_power_well default value to 1
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66808
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
[danvet: Added a comment that this might be better done in
drm_vblank_post_modeset in general.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Apparently Bspec is wrong in this case here even for gm45. Note that
Bspec is horribly misguided on i965g/gm, so we don't have any other
data points besides that it seems to make machines work better.
With this changes all the bits in PORT_HOTPLUG_STAT for the digital
ports are ordered the same way. This seems to agree with what register
dumps from the hpd storm handling code shows, where the LIVE bit and
the short/long pulse STATUS bits light up at the same time with this
enumeration (but no with the one from Bspec).
Also tested on my gm45 which has two DP+ ports, and everything seems
to still work as expected.
References: http://www.mail-archive.com/intel-gfx@lists.freedesktop.org/msg23054.html
Cc: Egbert Eich <eich@suse.com>
Cc: Jan Niggemann <jn@hz6.de>
Tested-by: Jan Niggemann <jn@hz6.de>
[danvet: Add a big warning that Bspec seems to be wrong for these
bits, suggested by Jani.]
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When a BO gets pinned the placement may get changed. If the memory is
mapped into user space and user space has already accessed the mapped
range the page tables are set up but now point to the wrong memory.
Set bo.mdev->dev_mapping in mgag200_bo_create() to make sure that
ttm_bo_unmap_virtual() called from ttm_bo_handle_move_mem() will take
care of this.
v2: Don't call ttm_bo_unmap_virtual() in mgag200_bo_pin(), fix comment.
Signed-off-by: Egbert Eich <eich@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is a cirrus version of Egbert Eich's patch for mgag200.
Without bo.bdev->dev_mapping set, the ttm_bo_unmap_virtual_locked
called from ttm_bo_handle_move_mem returns with no effect. If any
application accessed the memory before it was moved, it will
access wrong memory next time. This causes crashes when changing
resolution down.
Signed-off-by: Michal Srb <msrb@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Pull libata fix from Tejun Heo:
"Just the addition of MODULE_DEVICE_TABLE() for a platform driver"
* 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
pata_imx: expose module alias for loading from device-tree
Pull s390 fixes from Martin Schwidefsky:
"Enable LZ4 compression for the kernel image, add the machine id for
the new zBC12 model, fix an issue with hanging dasd devices, correct a
Kconfig dependency, fix a compile error in the perf module with
CONFIG_KVM=n and fix the find_next_bit_left primitive for the PCI base
layer"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/dasd: fix hanging devices after path events
s390/perf: fix compile error (undefined reference sie_exit)
s390/bitops: fix find_next_bit_left
s390: add support for IBM zBC12 machine
s390/Kconfig: select 'TTY' when 'S390_GUEST' is enabled
s390: add support for LZ4-compressed kernel
The physical_node_id_bitmap in struct acpi_device is only used for
looking up the first currently unused dependent phyiscal node ID
by acpi_bind_one(). It is not really necessary, however, because
acpi_bind_one() walks the entire physical_node_list of the given
device object for sanity checking anyway and if that list is always
sorted by node_id, it is straightforward to find the first gap
between the currently used node IDs and use that number as the ID
of the new list node.
This also removes the artificial limit of the maximum number of
dependent physical devices per ACPI device object, which now depends
only on the capacity of unsigend int. As a result, it fixes a
regression introduced by commit e2ff394 (ACPI / memhotplug: Bind
removable memory blocks to ACPI device nodes) that caused
acpi_memory_enable_device() to fail when the number of 128 MB blocks
within one removable memory module was greater than 32.
Reported-and-tested-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
The list of physical devices corresponding to an ACPI device
object is walked by acpi_system_wakeup_device_seq_show() and
physical_device_enable_wakeup() without taking that object's
physical_node_lock mutex. Since each of those functions may be
run at any time as a result of a user space action, the lack of
appropriate locking in them may lead to a kernel crash if that
happens during device hot-add or hot-remove involving the device
object in question.
Fix the issue by modifying acpi_system_wakeup_device_seq_show() and
physical_device_enable_wakeup() to use physical_node_lock as
appropriate.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: All <stable@vger.kernel.org>
regcache_sync_block_raw_flush() expects the address of the register after last
register that needs to be synced as its parameter. But the last call to
regcache_sync_block_raw_flush() in regcache_sync_block_raw() passes the address
of the last register in the block. This effectively always skips over the last
register in a block, even if it needs to be synced. In order to fix it increase
the address by one register.
The issue was introduced in commit 75a5f89 ("regmap: cache: Write consecutive
registers in a single block write").
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Add some necessary braces that have been removed during driver cleanup.
This fixes the I2C prescaler calculation.
Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Recently we have been seing some reports about PIO mode not working properly.
- http://www.spinics.net/lists/linux-i2c/msg11985.html
- http://marc.info/?l=linux-i2c&m=137235593101385&w=2
- https://lkml.org/lkml/2013/6/24/430
Let's use DMA mode even for small transfers.
Without this patch, i2c reads the incorrect sgtl5000 version on a mx28evk when
touchscreen is enabled:
[ 5.856270] sgtl5000 0-000a: Device with ID register 0 is not a sgtl5000
[ 9.877307] sgtl5000 0-000a: ASoC: failed to probe CODEC -19
[ 9.883528] mxs-sgtl5000 sound.12: ASoC: failed to instantiate card -19
[ 9.892955] mxs-sgtl5000 sound.12: snd_soc_register_card failed (-19)
Cc: <stable@vger.kernel.org>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Marek Vasut <marex@denx.de>
[wsa: we have a proper solution for -next, so this non intrusive
solution is OK for now]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Free sc->sc_page when releasing a struct o2net_sock_container
object to avoid memory leaks.
This issue has been fixed by Younger Liu for OCFS2, so I sync
that patch to zcache as we share the same network code base.
Cc: Younger Liu <younger.liu@huawei.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 98a5e9e99d.
IIO, like the rest of the kernel, should rely on dynamic debugging, not
have a special config option for it. That way, no user has to rebuild
their kernel to have debug messages, which is a good thing, let's not
revert back to the bad old days of the 2000's.
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There has been a lot of good work going into IIO recently, some of which
missed this pull request purely because I haven't caught up with all my
emails.
Core changes
1) Introduction of devm_iio_device_alloc/free and conversions of lots of
drivers (37 + patches so far mostly from Sachin)
2) A Kconfig option to enabled some debug logging subsystem wide.
New drivers
1) Nuvoton NAU7802 adc driver
2) Avago APDS9300 ambient light sensor driver.
Staging graduations
1) ADIS16260 gyroscope (after a lot fo cleaning up from Lars-Peter)
New driver features
1) ST-sensors gain control of which pin is used for dataready.
2) mcp4725 gains eeprom saving (a later fix deals with a wrong return type
bug in that patch)
3) A number of drivers have gained module alias' to aid autoloading.
Cleanups and minor bug fixes.
1) A number of typos in Kconfig comments
2) Drop remaining mentions of ring buffers (now just buffers)
3) Overrestrictive i2c function checking in the invensense mpu6050 driver
4) Some help text clarifications.
5) store_eeprom is now used in several drivers so move to generic abi docs.
6) Update dac power down options.
7) Add some error handlign to mxs-lradc on stmp_reset_block call.
8) Lars fixed the alphabetical order in various files and added comments
to try and prevent them getting messed up again.
9) Dropped some remaining 'reset' attributes for drivers. We have never
seen a reason why these should be available. Finally the macro
used to define many of these has gone.
10) lps331ap gets an easier to check temperature scale implementation.
11) Various cleanups for the hmc5843 from Peter with a view to getting
it ready for a staging graduation.
Quite a few other little typo fixes etc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.20 (GNU/Linux)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=gGdq
-----END PGP SIGNATURE-----
Merge tag 'iio-for-3.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First round of new IIO drivers, features and cleanups for the 3.12 cycle.
There has been a lot of good work going into IIO recently, some of which
missed this pull request purely because I haven't caught up with all my
emails.
Core changes
1) Introduction of devm_iio_device_alloc/free and conversions of lots of
drivers (37 + patches so far mostly from Sachin)
2) A Kconfig option to enabled some debug logging subsystem wide.
New drivers
1) Nuvoton NAU7802 adc driver
2) Avago APDS9300 ambient light sensor driver.
Staging graduations
1) ADIS16260 gyroscope (after a lot fo cleaning up from Lars-Peter)
New driver features
1) ST-sensors gain control of which pin is used for dataready.
2) mcp4725 gains eeprom saving (a later fix deals with a wrong return type
bug in that patch)
3) A number of drivers have gained module alias' to aid autoloading.
Cleanups and minor bug fixes.
1) A number of typos in Kconfig comments
2) Drop remaining mentions of ring buffers (now just buffers)
3) Overrestrictive i2c function checking in the invensense mpu6050 driver
4) Some help text clarifications.
5) store_eeprom is now used in several drivers so move to generic abi docs.
6) Update dac power down options.
7) Add some error handlign to mxs-lradc on stmp_reset_block call.
8) Lars fixed the alphabetical order in various files and added comments
to try and prevent them getting messed up again.
9) Dropped some remaining 'reset' attributes for drivers. We have never
seen a reason why these should be available. Finally the macro
used to define many of these has gone.
10) lps331ap gets an easier to check temperature scale implementation.
11) Various cleanups for the hmc5843 from Peter with a view to getting
it ready for a staging graduation.
Quite a few other little typo fixes etc.
1) Fix a long term race in the IIO trigger handling.
This only effects cases where a single trigger is in use
by multiple devices.
2) ti_am335x fix an issue with incorrect data due to reading before
the sequencer is finished.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.20 (GNU/Linux)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=U1lS
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-3.11b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
Second round of IIO fixes for the 3.11 cycle.
1) Fix a long term race in the IIO trigger handling.
This only effects cases where a single trigger is in use
by multiple devices.
2) ti_am335x fix an issue with incorrect data due to reading before
the sequencer is finished.
Hi Greg,
Here's two small fixes for 3.11. The first patch fixes a 5 second hang in
khubd after a USB device disconnect on some xHCI hosts. The second fixes a
build warning.
Sarah Sharp
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=sAz1
-----END PGP SIGNATURE-----
Merge tag 'for-usb-linus-2013-07-31' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus
Sarah writes:
xhci: Misc bug fixes for 3.11.
Hi Greg,
Here's two small fixes for 3.11. The first patch fixes a 5 second hang in
khubd after a USB device disconnect on some xHCI hosts. The second fixes a
build warning.
Sarah Sharp
If the _BCL package ordering is descending, the first level
(br->levels[2]) is likely to be 0, and if the number of levels
matches the number of steps, we might confuse a returned level to
mean the index.
For example:
current_level = max_level = 100
test_level = 0
returned level = 100
In this case 100 means the level, not the index, and _BCM failed.
Still, if the _BCL package ordering is descending, the index of
level 0 is also 100, so we assume _BQC is indexed, when it's not.
This causes all _BQC calls to return bogus values causing weird
behavior from the user's perspective. For example:
xbacklight -set 10; xbacklight -set 20;
would flash to 90% and then slowly down to the desired level (20).
The solution is simple; test anything other than the first level
(e.g. 1).
[rjw: Changelog]
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Lidza Louina