Commit Graph

5232 Commits

Author SHA1 Message Date
Linus Torvalds 73b193f265 Networking fixes for 5.18-rc2, including fixes from bpf and netfilter
Current release - new code bugs:
   - mctp: correct mctp_i2c_header_create result
 
   - eth: fungible: fix reference to __udivdi3 on 32b builds
 
   - eth: micrel: remove latencies support lan8814
 
 Previous releases - regressions:
   - bpf: resolve to prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT
 
   - vrf: fix packet sniffing for traffic originating from ip tunnels
 
   - rxrpc: fix a race in rxrpc_exit_net()
 
   - dsa: revert "net: dsa: stop updating master MTU from master.c"
 
   - eth: ice: fix MAC address setting
 
 Previous releases - always broken:
   - tls: fix slab-out-of-bounds bug in decrypt_internal
 
   - bpf: support dual-stack sockets in bpf_tcp_check_syncookie
 
   - xdp: fix coalescing for page_pool fragment recycling
 
   - ovs: fix leak of nested actions
 
   - eth: sfc:
     - add missing xdp queue reinitialization
     - fix using uninitialized xdp tx_queue
 
   - eth: ice:
     - clear default forwarding VSI during VSI release
     - fix broken IFF_ALLMULTI handling
     - synchronize_rcu() when terminating rings
 
   - eth: qede: confirm skb is allocated before using
 
   - eth: aqc111: fix out-of-bounds accesses in RX fixup
 
   - eth: slip: fix NPD bug in sl_tx_timeout()
 
 Signed-off-by: Paolo Abeni <pabeni@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmJPJvoSHHBhYmVuaUBy
 ZWRoYXQuY29tAAoJECkkeY3MjxOkZywQAKesxObtKwob6uclHfOOl3Tfv9EV20zl
 9T9r4vUJ7GtHtjzB59fcWXTRMgeDRRpUPww9U2DLFXEkms7b2O6XgjevRKg0e6ke
 eF7rPbjhv1igdtS43Vp+5fIUR7vMUhGKXjhLSFB5O+ToRYcWdufdPY4qU62SaFQV
 62d2SF/VbdNxnBP6Nzmv4i+EON1uKb8yDL2u4gdwOGO9EV9AUeJ2JNN3H1gc86I7
 kzL5gYc61Rd0UwwQAaUap6fcZi2kCRuSHCXLZlha/RK0BGWNcm2Fh5YKCKIAW+2/
 77Unt7aQZoj8DTUzBNjMJX432t18HTjvfOtkwTVIOXy/+n7meQjtgu93yFw9jU84
 Oqlc+A8/Si3EyweNC2OvrTqTrUH9ZjjGzL9cEzWaLtEBQWvVeDz7dZxT8QZieXAN
 hZGba7aq6Ty5CKN7AaOK6e9GMzY8eEVOoSK/dVFZmRiex/y1mME0OHSiuOS1GEVm
 dfbFvGr1dWEbnQ6yV5peM6KY6y/TNd45BKYD2q5xfCIcJPkZj/dhCli/lx+UGoZY
 OoX6C78sz5Ogj9UC9lTooA2vo55ykOyxM6yKy9Ky28TmbkkvqDH5GmGMi6TkZOin
 JNGTADvsZq8TTaq8J7/GbISfbqySUX0TcEM5goyDDFec9TxpWCQlx8P6FJjpM85z
 DpqQUwYMrIjW
 =rdzK
 -----END PGP SIGNATURE-----

Merge tag 'net-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf and netfilter.

  Current release - new code bugs:

   - mctp: correct mctp_i2c_header_create result

   - eth: fungible: fix reference to __udivdi3 on 32b builds

   - eth: micrel: remove latencies support lan8814

  Previous releases - regressions:

   - bpf: resolve to prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT

   - vrf: fix packet sniffing for traffic originating from ip tunnels

   - rxrpc: fix a race in rxrpc_exit_net()

   - dsa: revert "net: dsa: stop updating master MTU from master.c"

   - eth: ice: fix MAC address setting

  Previous releases - always broken:

   - tls: fix slab-out-of-bounds bug in decrypt_internal

   - bpf: support dual-stack sockets in bpf_tcp_check_syncookie

   - xdp: fix coalescing for page_pool fragment recycling

   - ovs: fix leak of nested actions

   - eth: sfc:
      - add missing xdp queue reinitialization
      - fix using uninitialized xdp tx_queue

   - eth: ice:
      - clear default forwarding VSI during VSI release
      - fix broken IFF_ALLMULTI handling
      - synchronize_rcu() when terminating rings

   - eth: qede: confirm skb is allocated before using

   - eth: aqc111: fix out-of-bounds accesses in RX fixup

   - eth: slip: fix NPD bug in sl_tx_timeout()"

* tag 'net-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
  drivers: net: slip: fix NPD bug in sl_tx_timeout()
  bpf: Adjust bpf_tcp_check_syncookie selftest to test dual-stack sockets
  bpf: Support dual-stack sockets in bpf_tcp_check_syncookie
  myri10ge: fix an incorrect free for skb in myri10ge_sw_tso
  net: usb: aqc111: Fix out-of-bounds accesses in RX fixup
  qede: confirm skb is allocated before using
  net: ipv6mr: fix unused variable warning with CONFIG_IPV6_PIMSM_V2=n
  net: phy: mscc-miim: reject clause 45 register accesses
  net: axiemac: use a phandle to reference pcs_phy
  dt-bindings: net: add pcs-handle attribute
  net: axienet: factor out phy_node in struct axienet_local
  net: axienet: setup mdio unconditionally
  net: sfc: fix using uninitialized xdp tx_queue
  rxrpc: fix a race in rxrpc_exit_net()
  net: openvswitch: fix leak of nested actions
  net: ethernet: mv643xx: Fix over zealous checking of_get_mac_address()
  net: openvswitch: don't send internal clone attribute to the userspace.
  net: micrel: Fix KS8851 Kconfig
  ice: clear cmd_type_offset_bsz for TX rings
  ice: xsk: fix VSI state check in ice_xsk_wakeup()
  ...
2022-04-07 19:01:47 -10:00
Linus Torvalds 09bb8856d4 Updates to Tracing:
- Rename the staging files to give them some meaning.
   Just stage1,stag2,etc, does not show what they are for
 
 - Check for NULL from allocation in bootconfig
 
 - Hold event mutex for dyn_event call in user events
 
 - Mark user events to broken (to work on the API)
 
 - Remove eBPF updates from user events
 
 - Remove user events from uapi header to keep it from being installed.
 
 - Move ftrace_graph_is_dead() into inline as it is called from hot paths
   and also convert it into a static branch.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYkmyIBQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qutfAQD90gbUgFMFe2akF5sKhonF5T6mm0+w
 BsWqNlBEKBxmfwD+Krfpxql/PKp/gCufcIUUkYC4E6Wl9akf3eO1qQel1Ao=
 =ZTn1
 -----END PGP SIGNATURE-----

Merge tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull more tracing updates from Steven Rostedt:

 - Rename the staging files to give them some meaning. Just
   stage1,stag2,etc, does not show what they are for

 - Check for NULL from allocation in bootconfig

 - Hold event mutex for dyn_event call in user events

 - Mark user events to broken (to work on the API)

 - Remove eBPF updates from user events

 - Remove user events from uapi header to keep it from being installed.

 - Move ftrace_graph_is_dead() into inline as it is called from hot
   paths and also convert it into a static branch.

* tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Move user_events.h temporarily out of include/uapi
  ftrace: Make ftrace_graph_is_dead() a static branch
  tracing: Set user_events to BROKEN
  tracing/user_events: Remove eBPF interfaces
  tracing/user_events: Hold event_mutex during dyn_event_add
  proc: bootconfig: Add null pointer check
  tracing: Rename the staging files for trace_events
2022-04-03 12:26:01 -07:00
Steven Rostedt (Google) 1cd927ad6f tracing: mark user_events as BROKEN
After being merged, user_events become more visible to a wider audience
that have concerns with the current API.

It is too late to fix this for this release, but instead of a full
revert, just mark it as BROKEN (which prevents it from being selected in
make config).  Then we can work finding a better API.  If that fails,
then it will need to be completely reverted.

To not have the code silently bitrot, still allow building it with
COMPILE_TEST.

And to prevent the uapi header from being installed, then later changed,
and then have an old distro user space see the old version, move the
header file out of the uapi directory.

Surround the include with CONFIG_COMPILE_TEST to the current location,
but when the BROKEN tag is taken off, it will use the uapi directory,
and fail to compile.  This is a good way to remind us to move the header
back.

Link: https://lore.kernel.org/all/20220330155835.5e1f6669@gandalf.local.home
Link: https://lkml.kernel.org/r/20220330201755.29319-1-mathieu.desnoyers@efficios.com
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-02 10:32:14 -07:00
Steven Rostedt (Google) 5cfff569ca tracing: Move user_events.h temporarily out of include/uapi
While user_events API is under development and has been marked for broken
to not let the API become fixed, move the header file out of the uapi
directory. This is to prevent it from being installed, then later changed,
and then have an old distro user space update with a new kernel, where
applications see the user_events being available, but the old header is in
place, and then they get compiled incorrectly.

Also, surround the include with CONFIG_COMPILE_TEST to the current
location, but when the BROKEN tag is taken off, it will use the uapi
directory, and fail to compile. This is a good way to remind us to move
the header back.

Link: https://lore.kernel.org/all/20220330155835.5e1f6669@gandalf.local.home
Link: https://lkml.kernel.org/r/20220330201755.29319-1-mathieu.desnoyers@efficios.com
Link: https://lkml.kernel.org/r/20220401143903.188384f3@gandalf.local.home

Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-04-02 08:40:10 -04:00
Christophe Leroy 18bfee3216 ftrace: Make ftrace_graph_is_dead() a static branch
ftrace_graph_is_dead() is used on hot paths, it just reads a variable
in memory and is not worth suffering function call constraints.

For instance, at entry of prepare_ftrace_return(), inlining it avoids
saving prepare_ftrace_return() parameters to stack and restoring them
after calling ftrace_graph_is_dead().

While at it using a static branch is even more performant and is
rather well adapted considering that the returned value will almost
never change.

Inline ftrace_graph_is_dead() and replace 'kill_ftrace_graph' bool
by a static branch.

The performance improvement is noticeable.

Link: https://lkml.kernel.org/r/e0411a6a0ed3eafff0ad2bc9cd4b0e202b4617df.1648623570.git.christophe.leroy@csgroup.eu

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-04-02 08:40:09 -04:00
Steven Rostedt (Google) fcbf591ced tracing: Set user_events to BROKEN
After being merged, user_events become more visible to a wider audience
that have concerns with the current API. It is too late to fix this for
this release, but instead of a full revert, just mark it as BROKEN (which
prevents it from being selected in make config). Then we can work finding
a better API. If that fails, then it will need to be completely reverted.

Link: https://lore.kernel.org/all/2059213643.196683.1648499088753.JavaMail.zimbra@efficios.com/
Link: https://lkml.kernel.org/r/20220330155835.5e1f6669@gandalf.local.home

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-04-02 08:40:09 -04:00
Beau Belgrave 768c1e7f1d tracing/user_events: Remove eBPF interfaces
Remove eBPF interfaces within user_events to ensure they are fully
reviewed.

Link: https://lore.kernel.org/all/20220329165718.GA10381@kbox/
Link: https://lkml.kernel.org/r/20220329173051.10087-1-beaub@linux.microsoft.com

Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-04-02 08:40:09 -04:00
Beau Belgrave efe34e99fc tracing/user_events: Hold event_mutex during dyn_event_add
Make sure the event_mutex is properly held during dyn_event_add call.
This is required when adding dynamic events.

Link: https://lkml.kernel.org/r/20220328223225.1992-1-beaub@linux.microsoft.com

Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-04-02 08:40:09 -04:00
Masami Hiramatsu a2fb49833c rethook: Fix to use WRITE_ONCE() for rethook:: Handler
Since the function pointered by rethook::handler never be removed when
the rethook is alive, it doesn't need to use rcu_assign_pointer() to
update it. Just use WRITE_ONCE().

Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/164868907688.21983.1606862921419988152.stgit@devnote2
2022-03-30 19:28:17 -07:00
Jiri Olsa d31e0386a2 bpf: Fix sparse warnings in kprobe_multi_resolve_syms
Adding missing __user tags to fix sparse warnings:

kernel/trace/bpf_trace.c:2370:34: warning: incorrect type in argument 2 (different address spaces)
kernel/trace/bpf_trace.c:2370:34:    expected void const [noderef] __user *from
kernel/trace/bpf_trace.c:2370:34:    got void const *usyms
kernel/trace/bpf_trace.c:2376:51: warning: incorrect type in argument 2 (different address spaces)
kernel/trace/bpf_trace.c:2376:51:    expected char const [noderef] __user *src
kernel/trace/bpf_trace.c:2376:51:    got char const *
kernel/trace/bpf_trace.c:2443:49: warning: incorrect type in argument 1 (different address spaces)
kernel/trace/bpf_trace.c:2443:49:    expected void const *usyms
kernel/trace/bpf_trace.c:2443:49:    got void [noderef] __user *[assigned] usyms

Fixes: 0dcac27254 ("bpf: Add multi kprobe link")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220330110510.398558-1-jolsa@kernel.org
2022-03-30 14:10:06 +02:00
Masami Hiramatsu 73f9b911fa kprobes: Use rethook for kretprobe if possible
Use rethook for kretprobe function return hooking if the arch sets
CONFIG_HAVE_RETHOOK=y. In this case, CONFIG_KRETPROBE_ON_RETHOOK is
set to 'y' automatically, and the kretprobe internal data fields
switches to use rethook. If not, it continues to use kretprobe
specific function return hooks.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/164826162556.2455864.12255833167233452047.stgit@devnote2
2022-03-28 19:38:09 -07:00
Masami Hiramatsu 261608f310 fprobe: Fix sparse warning for acccessing __rcu ftrace_hash
Since ftrace_ops::local_hash::filter_hash field is an __rcu pointer,
we have to use rcu_access_pointer() to access it.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/164802093635.1732982.4938094876018890866.stgit@devnote2
2022-03-28 19:05:40 -07:00
Masami Hiramatsu 9052e4e837 fprobe: Fix smatch type mismatch warning
Fix the type mismatching warning of 'rethook_node vs fprobe_rethook_node'
found by Smatch.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/164802092611.1732982.12268174743437084619.stgit@devnote2
2022-03-28 19:05:40 -07:00
Linus Torvalds 7001052160 Add support for Intel CET-IBT, available since Tigerlake (11th gen), which is a
coarse grained, hardware based, forward edge Control-Flow-Integrity mechanism
 where any indirect CALL/JMP must target an ENDBR instruction or suffer #CP.
 
 Additionally, since Alderlake (12th gen)/Sapphire-Rapids, speculation is
 limited to 2 instructions (and typically fewer) on branch targets not starting
 with ENDBR. CET-IBT also limits speculation of the next sequential instruction
 after the indirect CALL/JMP [1].
 
 CET-IBT is fundamentally incompatible with retpolines, but provides, as
 described above, speculation limits itself.
 
 [1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEv3OU3/byMaA0LqWJdkfhpEvA5LoFAmI/LI8VHHBldGVyekBp
 bmZyYWRlYWQub3JnAAoJEHZH4aRLwOS6ZnkP/2QCgQLTu6oRxv9O020CHwlaSEeD
 1Hoy3loum5q5hAi1Ik3dR9p0H5u64c9qbrBVxaFoNKaLt5GKrtHaDSHNk2L/CFHX
 urpH65uvTLxbyZzcahkAahoJ71XU+m7PcrHLWMunw9sy10rExYVsUOlFyoyG6XCF
 BDCNZpdkC09ZM3vwlWGMZd5Pp+6HcZNPyoV9tpvWAS2l+WYFWAID7mflbpQ+tA8b
 y/hM6b3Ud0rT2ubuG1iUpopgNdwqQZ+HisMPGprh+wKZkYwS2l8pUTrz0MaBkFde
 go7fW16kFy2HQzGm6aIEBmfcg0palP/mFVaWP0zS62LwhJSWTn5G6xWBr3yxSsht
 9gWCiI0oDZuTg698MedWmomdG2SK6yAuZuqmdKtLLoWfWgviPEi7TDFG/cKtZdAW
 ag8GM8T4iyYZzpCEcWO9GWbjo6TTGq30JBQefCBG47GjD0csv2ubXXx0Iey+jOwT
 x3E8wnv9dl8V9FSd/tMpTFmje8ges23yGrWtNpb5BRBuWTeuGiBPZED2BNyyIf+T
 dmewi2ufNMONgyNp27bDKopY81CPAQq9cVxqNm9Cg3eWPFnpOq2KGYEvisZ/rpEL
 EjMQeUBsy/C3AUFAleu1vwNnkwP/7JfKYpN00gnSyeQNZpqwxXBCKnHNgOMTXyJz
 beB/7u2KIUbKEkSN
 =jZfK
 -----END PGP SIGNATURE-----

Merge tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 CET-IBT (Control-Flow-Integrity) support from Peter Zijlstra:
 "Add support for Intel CET-IBT, available since Tigerlake (11th gen),
  which is a coarse grained, hardware based, forward edge
  Control-Flow-Integrity mechanism where any indirect CALL/JMP must
  target an ENDBR instruction or suffer #CP.

  Additionally, since Alderlake (12th gen)/Sapphire-Rapids, speculation
  is limited to 2 instructions (and typically fewer) on branch targets
  not starting with ENDBR. CET-IBT also limits speculation of the next
  sequential instruction after the indirect CALL/JMP [1].

  CET-IBT is fundamentally incompatible with retpolines, but provides,
  as described above, speculation limits itself"

[1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html

* tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
  kvm/emulate: Fix SETcc emulation for ENDBR
  x86/Kconfig: Only allow CONFIG_X86_KERNEL_IBT with ld.lld >= 14.0.0
  x86/Kconfig: Only enable CONFIG_CC_HAS_IBT for clang >= 14.0.0
  kbuild: Fixup the IBT kbuild changes
  x86/Kconfig: Do not allow CONFIG_X86_X32_ABI=y with llvm-objcopy
  x86: Remove toolchain check for X32 ABI capability
  x86/alternative: Use .ibt_endbr_seal to seal indirect calls
  objtool: Find unused ENDBR instructions
  objtool: Validate IBT assumptions
  objtool: Add IBT/ENDBR decoding
  objtool: Read the NOENDBR annotation
  x86: Annotate idtentry_df()
  x86,objtool: Move the ASM_REACHABLE annotation to objtool.h
  x86: Annotate call_on_stack()
  objtool: Rework ASM_REACHABLE
  x86: Mark __invalid_creds() __noreturn
  exit: Mark do_group_exit() __noreturn
  x86: Mark stop_this_cpu() __noreturn
  objtool: Ignore extra-symbol code
  objtool: Rename --duplicate to --lto
  ...
2022-03-27 10:17:23 -07:00
Linus Torvalds f022814633 Trace event fix of string verifier
- The run time string verifier that checks all trace event formats
   as they are read from the tracing file to make sure that the %s
   pointers are not reading something that no longer exists, failed
   to account for %*.s where the length given is zero, and the string
   is NULL. It incorrectly flagged it as a null pointer dereference and
   gave a WARN_ON().
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYjzyxBQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qk+WAP4+ICutAiIGyPmHEqtjLGyDPC25nbB3
 vg+qWWkWEOIi5gD+PpGsGSE7HYFdWJi1BCfshNOm8I92TyoE2nJkXh3LeA8=
 =mZr5
 -----END PGP SIGNATURE-----

Merge tag 'trace-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull trace event string verifier fix from Steven Rostedt:
 "The run-time string verifier checks all trace event formats as
  they are read from the tracing file to make sure that the %s pointers
  are not reading something that no longer exists.

  However, it failed to account for the valid case of '%*.s' where the
  length given is zero, and the string is NULL. It incorrectly flagged
  it as a null pointer dereference and gave a WARN_ON()"

* tag 'trace-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Have trace event string test handle zero length strings
2022-03-26 14:54:41 -07:00
Linus Torvalds 6f2689a766 SCSI misc on 20220324
This series consists of the usual driver updates (qla2xxx, pm8001,
 libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
 and bug fixes.  The high blast radius core update is the removal of
 write same, which affects block and several non-SCSI devices.  The
 other big change, which is more local, is the removal of the SCSI
 pointer.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYjzDQyYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQMYAQDEWUGV
 6U0+736AHVtOfiMNfiRN79B1HfXVoHvemnPcTwD/UlndwFfy/3GGOtoZmqEpc73J
 Ec1HDuUCE18H1H2QAh0=
 =/Ty9
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This series consists of the usual driver updates (qla2xxx, pm8001,
  libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
  and bug fixes.

  The high blast radius core update is the removal of write same, which
  affects block and several non-SCSI devices. The other big change,
  which is more local, is the removal of the SCSI pointer"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (281 commits)
  scsi: scsi_ioctl: Drop needless assignment in sg_io()
  scsi: bsg: Drop needless assignment in scsi_bsg_sg_io_fn()
  scsi: lpfc: Copyright updates for 14.2.0.0 patches
  scsi: lpfc: Update lpfc version to 14.2.0.0
  scsi: lpfc: SLI path split: Refactor BSG paths
  scsi: lpfc: SLI path split: Refactor Abort paths
  scsi: lpfc: SLI path split: Refactor SCSI paths
  scsi: lpfc: SLI path split: Refactor CT paths
  scsi: lpfc: SLI path split: Refactor misc ELS paths
  scsi: lpfc: SLI path split: Refactor VMID paths
  scsi: lpfc: SLI path split: Refactor FDISC paths
  scsi: lpfc: SLI path split: Refactor LS_RJT paths
  scsi: lpfc: SLI path split: Refactor LS_ACC paths
  scsi: lpfc: SLI path split: Refactor the RSCN/SCR/RDF/EDC/FARPR paths
  scsi: lpfc: SLI path split: Refactor PLOGI/PRLI/ADISC/LOGO paths
  scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path
  scsi: lpfc: SLI path split: Introduce lpfc_prep_wqe
  scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4
  scsi: lpfc: SLI path split: Refactor lpfc_iocbq
  scsi: lpfc: Use kcalloc()
  ...
2022-03-24 19:37:53 -07:00
Linus Torvalds 169e77764a Networking changes for 5.18.
Core
 ----
 
  - Introduce XDP multi-buffer support, allowing the use of XDP with
    jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
 
  - Speed up netns dismantling (5x) and lower the memory cost a little.
    Remove unnecessary per-netns sockets. Scope some lists to a netns.
    Cut down RCU syncing. Use batch methods. Allow netdev registration
    to complete out of order.
 
  - Support distinguishing timestamp types (ingress vs egress) and
    maintaining them across packet scrubbing points (e.g. redirect).
 
  - Continue the work of annotating packet drop reasons throughout
    the stack.
 
  - Switch netdev error counters from an atomic to dynamically
    allocated per-CPU counters.
 
  - Rework a few preempt_disable(), local_irq_save() and busy waiting
    sections problematic on PREEMPT_RT.
 
  - Extend the ref_tracker to allow catching use-after-free bugs.
 
 BPF
 ---
 
  - Introduce "packing allocator" for BPF JIT images. JITed code is
    marked read only, and used to be allocated at page granularity.
    Custom allocator allows for more efficient memory use, lower
    iTLB pressure and prevents identity mapping huge pages from
    getting split.
 
  - Make use of BTF type annotations (e.g. __user, __percpu) to enforce
    the correct probe read access method, add appropriate helpers.
 
  - Convert the BPF preload to use light skeleton and drop
    the user-mode-driver dependency.
 
  - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
    its use as a packet generator.
 
  - Allow local storage memory to be allocated with GFP_KERNEL if called
    from a hook allowed to sleep.
 
  - Introduce fprobe (multi kprobe) to speed up mass attachment (arch
    bits to come later).
 
  - Add unstable conntrack lookup helpers for BPF by using the BPF
    kfunc infra.
 
  - Allow cgroup BPF progs to return custom errors to user space.
 
  - Add support for AF_UNIX iterator batching.
 
  - Allow iterator programs to use sleepable helpers.
 
  - Support JIT of add, and, or, xor and xchg atomic ops on arm64.
 
  - Add BTFGen support to bpftool which allows to use CO-RE in kernels
    without BTF info.
 
  - Large number of libbpf API improvements, cleanups and deprecations.
 
 Protocols
 ---------
 
  - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
 
  - Adjust TSO packet sizes based on min_rtt, allowing very low latency
    links (data centers) to always send full-sized TSO super-frames.
 
  - Make IPv6 flow label changes (AKA hash rethink) more configurable,
    via sysctl and setsockopt. Distinguish between server and client
    behavior.
 
  - VxLAN support to "collect metadata" devices to terminate only
    configured VNIs. This is similar to VLAN filtering in the bridge.
 
  - Support inserting IPv6 IOAM information to a fraction of frames.
 
  - Add protocol attribute to IP addresses to allow identifying where
    given address comes from (kernel-generated, DHCP etc.)
 
  - Support setting socket and IPv6 options via cmsg on ping6 sockets.
 
  - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
    Define dscp_t and stop taking ECN bits into account in fib-rules.
 
  - Add support for locked bridge ports (for 802.1X).
 
  - tun: support NAPI for packets received from batched XDP buffs,
    doubling the performance in some scenarios.
 
  - IPv6 extension header handling in Open vSwitch.
 
  - Support IPv6 control message load balancing in bonding, prevent
    neighbor solicitation and advertisement from using the wrong port.
    Support NS/NA monitor selection similar to existing ARP monitor.
 
  - SMC
    - improve performance with TCP_CORK and sendfile()
    - support auto-corking
    - support TCP_NODELAY
 
  - MCTP (Management Component Transport Protocol)
    - add user space tag control interface
    - I2C binding driver (as specified by DMTF DSP0237)
 
  - Multi-BSSID beacon handling in AP mode for WiFi.
 
  - Bluetooth:
    - handle MSFT Monitor Device Event
    - add MGMT Adv Monitor Device Found/Lost events
 
  - Multi-Path TCP:
    - add support for the SO_SNDTIMEO socket option
    - lots of selftest cleanups and improvements
 
  - Increase the max PDU size in CAN ISOTP to 64 kB.
 
 Driver API
 ----------
 
  - Add HW counters for SW netdevs, a mechanism for devices which
    offload packet forwarding to report packet statistics back to
    software interfaces such as tunnels.
 
  - Select the default NIC queue count as a fraction of number of
    physical CPU cores, instead of hard-coding to 8.
 
  - Expose devlink instance locks to drivers. Allow device layer of
    drivers to use that lock directly instead of creating their own
    which always runs into ordering issues in devlink callbacks.
 
  - Add header/data split indication to guide user space enabling
    of TCP zero-copy Rx.
 
  - Allow configuring completion queue event size.
 
  - Refactor page_pool to enable fragmenting after allocation.
 
  - Add allocation and page reuse statistics to page_pool.
 
  - Improve Multiple Spanning Trees support in the bridge to allow
    reuse of topologies across VLANs, saving HW resources in switches.
 
  - DSA (Distributed Switch Architecture):
    - replay and offload of host VLAN entries
    - offload of static and local FDB entries on LAG interfaces
    - FDB isolation and unicast filtering
 
 New hardware / drivers
 ----------------------
 
  - Ethernet:
    - LAN937x T1 PHYs
    - Davicom DM9051 SPI NIC driver
    - Realtek RTL8367S, RTL8367RB-VB switch and MDIO
    - Microchip ksz8563 switches
    - Netronome NFP3800 SmartNICs
    - Fungible SmartNICs
    - MediaTek MT8195 switches
 
  - WiFi:
    - mt76: MediaTek mt7916
    - mt76: MediaTek mt7921u USB adapters
    - brcmfmac: Broadcom BCM43454/6
 
  - Mobile:
    - iosm: Intel M.2 7360 WWAN card
 
 Drivers
 -------
 
  - Convert many drivers to the new phylink API built for split PCS
    designs but also simplifying other cases.
 
  - Intel Ethernet NICs:
    - add TTY for GNSS module for E810T device
    - improve AF_XDP performance
    - GTP-C and GTP-U filter offload
    - QinQ VLAN support
 
  - Mellanox Ethernet NICs (mlx5):
    - support xdp->data_meta
    - multi-buffer XDP
    - offload tc push_eth and pop_eth actions
 
  - Netronome Ethernet NICs (nfp):
    - flow-independent tc action hardware offload (police / meter)
    - AF_XDP
 
  - Other Ethernet NICs:
    - at803x: fiber and SFP support
    - xgmac: mdio: preamble suppression and custom MDC frequencies
    - r8169: enable ASPM L1.2 if system vendor flags it as safe
    - macb/gem: ZynqMP SGMII
    - hns3: add TX push mode
    - dpaa2-eth: software TSO
    - lan743x: multi-queue, mdio, SGMII, PTP
    - axienet: NAPI and GRO support
 
  - Mellanox Ethernet switches (mlxsw):
    - source and dest IP address rewrites
    - RJ45 ports
 
  - Marvell Ethernet switches (prestera):
    - basic routing offload
    - multi-chain TC ACL offload
 
  - NXP embedded Ethernet switches (ocelot & felix):
    - PTP over UDP with the ocelot-8021q DSA tagging protocol
    - basic QoS classification on Felix DSA switch using dcbnl
    - port mirroring for ocelot switches
 
  - Microchip high-speed industrial Ethernet (sparx5):
    - offloading of bridge port flooding flags
    - PTP Hardware Clock
 
  - Other embedded switches:
    - lan966x: PTP Hardward Clock
    - qca8k: mdio read/write operations via crafted Ethernet packets
 
  - Qualcomm 802.11ax WiFi (ath11k):
    - add LDPC FEC type and 802.11ax High Efficiency data in radiotap
    - enable RX PPDU stats in monitor co-exist mode
 
  - Intel WiFi (iwlwifi):
    - UHB TAS enablement via BIOS
    - band disablement via BIOS
    - channel switch offload
    - 32 Rx AMPDU sessions in newer devices
 
  - MediaTek WiFi (mt76):
    - background radar detection
    - thermal management improvements on mt7915
    - SAR support for more mt76 platforms
    - MBSSID and 6 GHz band on mt7915
 
  - RealTek WiFi:
    - rtw89: AP mode
    - rtw89: 160 MHz channels and 6 GHz band
    - rtw89: hardware scan
 
  - Bluetooth:
    - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
 
  - Microchip CAN (mcp251xfd):
    - multiple RX-FIFOs and runtime configurable RX/TX rings
    - internal PLL, runtime PM handling simplification
    - improve chip detection and error handling after wakeup
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmI7YBcACgkQMUZtbf5S
 IrveSBAAmSNJlUK6vPsnNzs7IhsZnfI/AUjm2TCLZnlhKttbpI4A/4Pohk33V7RS
 FGX7f8kjEfhUwrIiLDgeCnztNHRECrCmk6aZc/jLEvecmTauJ+f6kjShkDY/wix+
 AkPHmrZnQeLPAEVuljDdV+sL6ik08+zQL7PazIYHsaSKKC0MGQptRwcri8PLRAKE
 KPBAhVhleq2rAZ/ntprSN52F4Af6rpFTrPIWuN8Bqdbc9dy5094LT0mpOOWYvgr3
 /DLvvAPuLemwyIQkjWknVKBRUAQcmNPC+BY3J8K3LRaiNhekGqOFan46BfqP+k2J
 6DWu0Qrp2yWt4BMOeEToZR5rA6v5suUAMIBu8PRZIDkINXQMlIxHfGjZyNm0rVfw
 7edNri966yus9OdzwPa32MIG3oC6PnVAwYCJAjjBMNS8sSIkp7wgHLkgWN4UFe2H
 K/e6z8TLF4UQ+zFM0aGI5WZ+9QqWkTWEDF3R3OhdFpGrznna0gxmkOeV2YvtsgxY
 cbS0vV9Zj73o+bYzgBKJsw/dAjyLdXoHUGvus26VLQ78S/VGunVKtItwoxBAYmZo
 krW964qcC89YofzSi8RSKLHuEWtNWZbVm8YXr75u6jpr5GhMBu0CYefLs+BuZcxy
 dw8c69cGneVbGZmY2J3rBhDkchbuICl8vdUPatGrOJAoaFdYKuw=
 =ELpe
 -----END PGP SIGNATURE-----

Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "The sprinkling of SPI drivers is because we added a new one and Mark
  sent us a SPI driver interface conversion pull request.

  Core
  ----

   - Introduce XDP multi-buffer support, allowing the use of XDP with
     jumbo frame MTUs and combination with Rx coalescing offloads (LRO).

   - Speed up netns dismantling (5x) and lower the memory cost a little.
     Remove unnecessary per-netns sockets. Scope some lists to a netns.
     Cut down RCU syncing. Use batch methods. Allow netdev registration
     to complete out of order.

   - Support distinguishing timestamp types (ingress vs egress) and
     maintaining them across packet scrubbing points (e.g. redirect).

   - Continue the work of annotating packet drop reasons throughout the
     stack.

   - Switch netdev error counters from an atomic to dynamically
     allocated per-CPU counters.

   - Rework a few preempt_disable(), local_irq_save() and busy waiting
     sections problematic on PREEMPT_RT.

   - Extend the ref_tracker to allow catching use-after-free bugs.

  BPF
  ---

   - Introduce "packing allocator" for BPF JIT images. JITed code is
     marked read only, and used to be allocated at page granularity.
     Custom allocator allows for more efficient memory use, lower iTLB
     pressure and prevents identity mapping huge pages from getting
     split.

   - Make use of BTF type annotations (e.g. __user, __percpu) to enforce
     the correct probe read access method, add appropriate helpers.

   - Convert the BPF preload to use light skeleton and drop the
     user-mode-driver dependency.

   - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
     its use as a packet generator.

   - Allow local storage memory to be allocated with GFP_KERNEL if
     called from a hook allowed to sleep.

   - Introduce fprobe (multi kprobe) to speed up mass attachment (arch
     bits to come later).

   - Add unstable conntrack lookup helpers for BPF by using the BPF
     kfunc infra.

   - Allow cgroup BPF progs to return custom errors to user space.

   - Add support for AF_UNIX iterator batching.

   - Allow iterator programs to use sleepable helpers.

   - Support JIT of add, and, or, xor and xchg atomic ops on arm64.

   - Add BTFGen support to bpftool which allows to use CO-RE in kernels
     without BTF info.

   - Large number of libbpf API improvements, cleanups and deprecations.

  Protocols
  ---------

   - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.

   - Adjust TSO packet sizes based on min_rtt, allowing very low latency
     links (data centers) to always send full-sized TSO super-frames.

   - Make IPv6 flow label changes (AKA hash rethink) more configurable,
     via sysctl and setsockopt. Distinguish between server and client
     behavior.

   - VxLAN support to "collect metadata" devices to terminate only
     configured VNIs. This is similar to VLAN filtering in the bridge.

   - Support inserting IPv6 IOAM information to a fraction of frames.

   - Add protocol attribute to IP addresses to allow identifying where
     given address comes from (kernel-generated, DHCP etc.)

   - Support setting socket and IPv6 options via cmsg on ping6 sockets.

   - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
     Define dscp_t and stop taking ECN bits into account in fib-rules.

   - Add support for locked bridge ports (for 802.1X).

   - tun: support NAPI for packets received from batched XDP buffs,
     doubling the performance in some scenarios.

   - IPv6 extension header handling in Open vSwitch.

   - Support IPv6 control message load balancing in bonding, prevent
     neighbor solicitation and advertisement from using the wrong port.
     Support NS/NA monitor selection similar to existing ARP monitor.

   - SMC
      - improve performance with TCP_CORK and sendfile()
      - support auto-corking
      - support TCP_NODELAY

   - MCTP (Management Component Transport Protocol)
      - add user space tag control interface
      - I2C binding driver (as specified by DMTF DSP0237)

   - Multi-BSSID beacon handling in AP mode for WiFi.

   - Bluetooth:
      - handle MSFT Monitor Device Event
      - add MGMT Adv Monitor Device Found/Lost events

   - Multi-Path TCP:
      - add support for the SO_SNDTIMEO socket option
      - lots of selftest cleanups and improvements

   - Increase the max PDU size in CAN ISOTP to 64 kB.

  Driver API
  ----------

   - Add HW counters for SW netdevs, a mechanism for devices which
     offload packet forwarding to report packet statistics back to
     software interfaces such as tunnels.

   - Select the default NIC queue count as a fraction of number of
     physical CPU cores, instead of hard-coding to 8.

   - Expose devlink instance locks to drivers. Allow device layer of
     drivers to use that lock directly instead of creating their own
     which always runs into ordering issues in devlink callbacks.

   - Add header/data split indication to guide user space enabling of
     TCP zero-copy Rx.

   - Allow configuring completion queue event size.

   - Refactor page_pool to enable fragmenting after allocation.

   - Add allocation and page reuse statistics to page_pool.

   - Improve Multiple Spanning Trees support in the bridge to allow
     reuse of topologies across VLANs, saving HW resources in switches.

   - DSA (Distributed Switch Architecture):
      - replay and offload of host VLAN entries
      - offload of static and local FDB entries on LAG interfaces
      - FDB isolation and unicast filtering

  New hardware / drivers
  ----------------------

   - Ethernet:
      - LAN937x T1 PHYs
      - Davicom DM9051 SPI NIC driver
      - Realtek RTL8367S, RTL8367RB-VB switch and MDIO
      - Microchip ksz8563 switches
      - Netronome NFP3800 SmartNICs
      - Fungible SmartNICs
      - MediaTek MT8195 switches

   - WiFi:
      - mt76: MediaTek mt7916
      - mt76: MediaTek mt7921u USB adapters
      - brcmfmac: Broadcom BCM43454/6

   - Mobile:
      - iosm: Intel M.2 7360 WWAN card

  Drivers
  -------

   - Convert many drivers to the new phylink API built for split PCS
     designs but also simplifying other cases.

   - Intel Ethernet NICs:
      - add TTY for GNSS module for E810T device
      - improve AF_XDP performance
      - GTP-C and GTP-U filter offload
      - QinQ VLAN support

   - Mellanox Ethernet NICs (mlx5):
      - support xdp->data_meta
      - multi-buffer XDP
      - offload tc push_eth and pop_eth actions

   - Netronome Ethernet NICs (nfp):
      - flow-independent tc action hardware offload (police / meter)
      - AF_XDP

   - Other Ethernet NICs:
      - at803x: fiber and SFP support
      - xgmac: mdio: preamble suppression and custom MDC frequencies
      - r8169: enable ASPM L1.2 if system vendor flags it as safe
      - macb/gem: ZynqMP SGMII
      - hns3: add TX push mode
      - dpaa2-eth: software TSO
      - lan743x: multi-queue, mdio, SGMII, PTP
      - axienet: NAPI and GRO support

   - Mellanox Ethernet switches (mlxsw):
      - source and dest IP address rewrites
      - RJ45 ports

   - Marvell Ethernet switches (prestera):
      - basic routing offload
      - multi-chain TC ACL offload

   - NXP embedded Ethernet switches (ocelot & felix):
      - PTP over UDP with the ocelot-8021q DSA tagging protocol
      - basic QoS classification on Felix DSA switch using dcbnl
      - port mirroring for ocelot switches

   - Microchip high-speed industrial Ethernet (sparx5):
      - offloading of bridge port flooding flags
      - PTP Hardware Clock

   - Other embedded switches:
      - lan966x: PTP Hardward Clock
      - qca8k: mdio read/write operations via crafted Ethernet packets

   - Qualcomm 802.11ax WiFi (ath11k):
      - add LDPC FEC type and 802.11ax High Efficiency data in radiotap
      - enable RX PPDU stats in monitor co-exist mode

   - Intel WiFi (iwlwifi):
      - UHB TAS enablement via BIOS
      - band disablement via BIOS
      - channel switch offload
      - 32 Rx AMPDU sessions in newer devices

   - MediaTek WiFi (mt76):
      - background radar detection
      - thermal management improvements on mt7915
      - SAR support for more mt76 platforms
      - MBSSID and 6 GHz band on mt7915

   - RealTek WiFi:
      - rtw89: AP mode
      - rtw89: 160 MHz channels and 6 GHz band
      - rtw89: hardware scan

   - Bluetooth:
      - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)

   - Microchip CAN (mcp251xfd):
      - multiple RX-FIFOs and runtime configurable RX/TX rings
      - internal PLL, runtime PM handling simplification
      - improve chip detection and error handling after wakeup"

* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
  llc: fix netdevice reference leaks in llc_ui_bind()
  drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
  ice: don't allow to run ice_send_event_to_aux() in atomic ctx
  ice: fix 'scheduling while atomic' on aux critical err interrupt
  net/sched: fix incorrect vlan_push_eth dest field
  net: bridge: mst: Restrict info size queries to bridge ports
  net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
  drivers: net: xgene: Fix regression in CRC stripping
  net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
  net: dsa: fix missing host-filtered multicast addresses
  net/mlx5e: Fix build warning, detected write beyond size of field
  iwlwifi: mvm: Don't fail if PPAG isn't supported
  selftests/bpf: Fix kprobe_multi test.
  Revert "rethook: x86: Add rethook x86 implementation"
  Revert "arm64: rethook: Add arm64 rethook implementation"
  Revert "powerpc: Add rethook support"
  Revert "ARM: rethook: Add rethook arm implementation"
  netdevice: add missing dm_private kdoc
  net: bridge: mst: prevent NULL deref in br_mst_info_size()
  selftests: forwarding: Use same VRF for port and VLAN upper
  ...
2022-03-24 13:13:26 -07:00
Linus Torvalds 194dfe88d6 asm-generic updates for 5.18
There are three sets of updates for 5.18 in the asm-generic tree:
 
  - The set_fs()/get_fs() infrastructure gets removed for good. This
    was already gone from all major architectures, but now we can
    finally remove it everywhere, which loses some particularly
    tricky and error-prone code.
    There is a small merge conflict against a parisc cleanup, the
    solution is to use their new version.
 
  - The nds32 architecture ends its tenure in the Linux kernel. The
    hardware is still used and the code is in reasonable shape, but
    the mainline port is not actively maintained any more, as all
    remaining users are thought to run vendor kernels that would never
    be updated to a future release.
    There are some obvious conflicts against changes to the removed
    files.
 
  - A series from Masahiro Yamada cleans up some of the uapi header
    files to pass the compile-time checks.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmI69BsACgkQmmx57+YA
 GNn/zA//f4d5VTT0ThhRxRWTu9BdThGHoB8TUcY7iOhbsWu0X/913NItRC3UeWNl
 IdmisaXgVtirg1dcC2pWUmrcHdoWOCEGfK4+Zr2NhSWfuZDWvODHK9pGWk4WLnhe
 cQgUNBvIuuAMryGtrOBwHPO4TpfCyy2ioeVP36ZfcsWXdDxTrqfaq/56mk3sxIP6
 sUTk1UEjut9NG4C9xIIvcSU50R3l6LryQE/H9kyTLtaSvfvTOvprcVYCq0GPmSzo
 DtQ1Wwa9zbJ+4EqoMiP5RrgQwWvOTg2iRByLU8ytwlX3e/SEF0uihvMv1FQbL8zG
 G8RhGUOKQSEhaBfc3lIkm8GpOVPh0uHzB6zhn7daVmAWtazRD2Nu59BMjipa+ims
 a8Z58iHH7jRAnKeEkVZqXKb1CEiUxaQx/IeVPzN4QlwMhDtwrI76LY7ZJ1zCqTGY
 ENG0yRLav1XselYBslOYXGtOEWcY5EZPWqLyWbp4P9vz2g0Fe0gZxoIOvPmNQc89
 QnfXpCt7vm/DGkyO255myu08GOLeMkisVqUIzLDB9avlym5mri7T7vk9abBa2YyO
 CRpTL5gl1/qKPWuH1UI5mvhT+sbbBE2SUHSuy84btns39ZKKKynwCtdu+hSQkKLE
 h9pV30Gf1cLTD4JAE0RWlUgOmbBLVp34loTOexQj4MrLM1noOnw=
 =vtCN
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic updates from Arnd Bergmann:
 "There are three sets of updates for 5.18 in the asm-generic tree:

   - The set_fs()/get_fs() infrastructure gets removed for good.

     This was already gone from all major architectures, but now we can
     finally remove it everywhere, which loses some particularly tricky
     and error-prone code. There is a small merge conflict against a
     parisc cleanup, the solution is to use their new version.

   - The nds32 architecture ends its tenure in the Linux kernel.

     The hardware is still used and the code is in reasonable shape, but
     the mainline port is not actively maintained any more, as all
     remaining users are thought to run vendor kernels that would never
     be updated to a future release.

   - A series from Masahiro Yamada cleans up some of the uapi header
     files to pass the compile-time checks"

* tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits)
  nds32: Remove the architecture
  uaccess: remove CONFIG_SET_FS
  ia64: remove CONFIG_SET_FS support
  sh: remove CONFIG_SET_FS support
  sparc64: remove CONFIG_SET_FS support
  lib/test_lockup: fix kernel pointer check for separate address spaces
  uaccess: generalize access_ok()
  uaccess: fix type mismatch warnings from access_ok()
  arm64: simplify access_ok()
  m68k: fix access_ok for coldfire
  MIPS: use simpler access_ok()
  MIPS: Handle address errors for accesses above CPU max virtual user address
  uaccess: add generic __{get,put}_kernel_nofault
  nios2: drop access_ok() check from __put_user()
  x86: use more conventional access_ok() definition
  x86: remove __range_not_ok()
  sparc64: add __{get,put}_kernel_nofault()
  nds32: fix access_ok() checks in get/put_user
  uaccess: fix nios2 and microblaze get_user_8()
  sparc64: fix building assembly files
  ...
2022-03-23 18:03:08 -07:00
Linus Torvalds 1bc191051d Tracing updates for 5.18:
- New user_events interface. User space can register an event with the kernel
   describing the format of the event. Then it will receive a byte in a page
   mapping that it can check against. A privileged task can then enable that
   event like any other event, which will change the mapped byte to true,
   telling the user space application to start writing the event to the
   tracing buffer.
 
 - Add new "ftrace_boot_snapshot" kernel command line parameter. When set,
   the tracing buffer will be saved in the snapshot buffer at boot up when
   the kernel hands things over to user space. This will keep the traces that
   happened at boot up available even if user space boot up has tracing as
   well.
 
 - Have TRACE_EVENT_ENUM() also update trace event field type descriptions.
   Thus if a static array defines its size with an enum, the user space trace
   event parsers can still know how to parse that array.
 
 - Add new TRACE_CUSTOM_EVENT() macro. This acts the same as the
   TRACE_EVENT() macro, but will attach to an existing tracepoint. This will
   make one tracepoint be able to trace different content and not be stuck at
   only what the original TRACE_EVENT() macro exports.
 
 - Fixes to tracing error logging.
 
 - Better saving of cmdlines to PIDs when tracing (use the wakeup events for
   mapping).
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYjiO3RQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qhQzAQDtek5p80p/zkMGymm14wSH6qq0NdgN
 Kv7fTBwEewUa0gD/UCOVLw4Oj+JtHQhCa3sCGZopmRv0BT1+4UQANqosKQY=
 =Au08
 -----END PGP SIGNATURE-----

Merge tag 'trace-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:

 - New user_events interface. User space can register an event with the
   kernel describing the format of the event. Then it will receive a
   byte in a page mapping that it can check against. A privileged task
   can then enable that event like any other event, which will change
   the mapped byte to true, telling the user space application to start
   writing the event to the tracing buffer.

 - Add new "ftrace_boot_snapshot" kernel command line parameter. When
   set, the tracing buffer will be saved in the snapshot buffer at boot
   up when the kernel hands things over to user space. This will keep
   the traces that happened at boot up available even if user space boot
   up has tracing as well.

 - Have TRACE_EVENT_ENUM() also update trace event field type
   descriptions. Thus if a static array defines its size with an enum,
   the user space trace event parsers can still know how to parse that
   array.

 - Add new TRACE_CUSTOM_EVENT() macro. This acts the same as the
   TRACE_EVENT() macro, but will attach to an existing tracepoint. This
   will make one tracepoint be able to trace different content and not
   be stuck at only what the original TRACE_EVENT() macro exports.

 - Fixes to tracing error logging.

 - Better saving of cmdlines to PIDs when tracing (use the wakeup events
   for mapping).

* tag 'trace-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (30 commits)
  tracing: Have type enum modifications copy the strings
  user_events: Add trace event call as root for low permission cases
  tracing/user_events: Use alloc_pages instead of kzalloc() for register pages
  tracing: Add snapshot at end of kernel boot up
  tracing: Have TRACE_DEFINE_ENUM affect trace event types as well
  tracing: Fix strncpy warning in trace_events_synth.c
  user_events: Prevent dyn_event delete racing with ioctl add/delete
  tracing: Add TRACE_CUSTOM_EVENT() macro
  tracing: Move the defines to create TRACE_EVENTS into their own files
  tracing: Add sample code for custom trace events
  tracing: Allow custom events to be added to the tracefs directory
  tracing: Fix last_cmd_set() string management in histogram code
  user_events: Fix potential uninitialized pointer while parsing field
  tracing: Fix allocation of last_cmd in last_cmd_set()
  user_events: Add documentation file
  user_events: Add sample code for typical usage
  user_events: Add self-test for validator boundaries
  user_events: Add self-test for perf_event integration
  user_events: Add self-test for dynamic_events integration
  user_events: Add self-test for ftrace integration
  ...
2022-03-23 11:40:25 -07:00
Steven Rostedt (Google) eca344a736 tracing: Have trace event string test handle zero length strings
If a trace event has in its TP_printk():

 "%*.s", len, len ? __get_str(string) : NULL

It is perfectly valid if len is zero and passing in the NULL.
Unfortunately, the runtime string check at time of reading the trace sees
the NULL and flags it as a bad string and produces a WARN_ON().

Handle this case by passing into the test function if the format has an
asterisk (star) and if so, if the length is zero, then mark it as safe.

Link: https://lore.kernel.org/all/YjsWzuw5FbWPrdqq@bfoster/

Cc: stable@vger.kernel.org
Reported-by: Brian Foster <bfoster@redhat.com>
Tested-by: Brian Foster <bfoster@redhat.com>
Fixes: 9a6944fee6 ("tracing: Add a verifier to check string pointers for trace events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-03-23 10:51:58 -04:00
Linus Torvalds 3fe2f7446f Changes in this cycle were:
- Cleanups for SCHED_DEADLINE
  - Tracing updates/fixes
  - CPU Accounting fixes
  - First wave of changes to optimize the overhead of the scheduler build,
    from the fast-headers tree - including placeholder *_api.h headers for
    later header split-ups.
  - Preempt-dynamic using static_branch() for ARM64
  - Isolation housekeeping mask rework; preperatory for further changes
  - NUMA-balancing: deal with CPU-less nodes
  - NUMA-balancing: tune systems that have multiple LLC cache domains per node (eg. AMD)
  - Updates to RSEQ UAPI in preparation for glibc usage
  - Lots of RSEQ/selftests, for same
  - Add Suren as PSI co-maintainer
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmI5rg8RHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1hGrw/+M3QOk6fH7G48wjlNnBvcOife6ls+Ni4k
 ixOAcF4JKoixO8HieU5vv0A7yf/83tAa6fpeXeMf1hkCGc0NSlmLtuIux+WOmoAL
 LzCyDEYfiP8KnVh0A1Tui/lK0+AkGo21O6ADhQE2gh8o2LpslOHQMzvtyekSzeeb
 mVxMYQN+QH0m518xdO2D8IQv9ctOYK0eGjmkqdNfntOlytypPZHeNel/tCzwklP/
 dElJUjNiSKDlUgTBPtL3DfpoLOI/0mHF2p6NEXvNyULxSOqJTu8pv9Z2ADb2kKo1
 0D56iXBDngMi9MHIJLgvzsA8gKzHLFSuPbpODDqkTZCa28vaMB9NYGhJ643NtEie
 IXTJEvF1rmNkcLcZlZxo0yjL0fjvPkczjw4Vj27gbrUQeEBfb4mfuI4BRmij63Ep
 qEkgQTJhduCqqrQP1rVyhwWZRk1JNcVug+F6N42qWW3fg1xhj0YSrLai2c9nPez6
 3Zt98H8YGS1Z/JQomSw48iGXVqfTp/ETI7uU7jqHK8QcjzQ4lFK5H4GZpwuqGBZi
 NJJ1l97XMEas+rPHiwMEN7Z1DVhzJLCp8omEj12QU+tGLofxxwAuuOVat3CQWLRk
 f80Oya3TLEgd22hGIKDRmHa22vdWnNQyS0S15wJotawBzQf+n3auS9Q3/rh979+t
 ES/qvlGxTIs=
 =Z8uT
 -----END PGP SIGNATURE-----

Merge tag 'sched-core-2022-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler updates from Ingo Molnar:

 - Cleanups for SCHED_DEADLINE

 - Tracing updates/fixes

 - CPU Accounting fixes

 - First wave of changes to optimize the overhead of the scheduler
   build, from the fast-headers tree - including placeholder *_api.h
   headers for later header split-ups.

 - Preempt-dynamic using static_branch() for ARM64

 - Isolation housekeeping mask rework; preperatory for further changes

 - NUMA-balancing: deal with CPU-less nodes

 - NUMA-balancing: tune systems that have multiple LLC cache domains per
   node (eg. AMD)

 - Updates to RSEQ UAPI in preparation for glibc usage

 - Lots of RSEQ/selftests, for same

 - Add Suren as PSI co-maintainer

* tag 'sched-core-2022-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits)
  sched/headers: ARM needs asm/paravirt_api_clock.h too
  sched/numa: Fix boot crash on arm64 systems
  headers/prep: Fix header to build standalone: <linux/psi.h>
  sched/headers: Only include <linux/entry-common.h> when CONFIG_GENERIC_ENTRY=y
  cgroup: Fix suspicious rcu_dereference_check() usage warning
  sched/preempt: Tell about PREEMPT_DYNAMIC on kernel headers
  sched/topology: Remove redundant variable and fix incorrect type in build_sched_domains
  sched/deadline,rt: Remove unused parameter from pick_next_[rt|dl]_entity()
  sched/deadline,rt: Remove unused functions for !CONFIG_SMP
  sched/deadline: Use __node_2_[pdl|dle]() and rb_first_cached() consistently
  sched/deadline: Merge dl_task_can_attach() and dl_cpu_busy()
  sched/deadline: Move bandwidth mgmt and reclaim functions into sched class source file
  sched/deadline: Remove unused def_dl_bandwidth
  sched/tracing: Report TASK_RTLOCK_WAIT tasks as TASK_UNINTERRUPTIBLE
  sched/tracing: Don't re-read p->state when emitting sched_switch event
  sched/rt: Plug rt_mutex_setprio() vs push_rt_task() race
  sched/cpuacct: Remove redundant RCU read lock
  sched/cpuacct: Optimize away RCU read lock
  sched/cpuacct: Fix charge percpu cpuusage
  sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
  ...
2022-03-22 14:39:12 -07:00
Jakub Kicinski 0db8640df5 Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:

====================
pull-request: bpf-next 2022-03-21 v2

We've added 137 non-merge commits during the last 17 day(s) which contain
a total of 143 files changed, 7123 insertions(+), 1092 deletions(-).

The main changes are:

1) Custom SEC() handling in libbpf, from Andrii.

2) subskeleton support, from Delyan.

3) Use btf_tag to recognize __percpu pointers in the verifier, from Hao.

4) Fix net.core.bpf_jit_harden race, from Hou.

5) Fix bpf_sk_lookup remote_port on big-endian, from Jakub.

6) Introduce fprobe (multi kprobe) _without_ arch bits, from Masami.
The arch specific bits will come later.

7) Introduce multi_kprobe bpf programs on top of fprobe, from Jiri.

8) Enable non-atomic allocations in local storage, from Joanne.

9) Various var_off ptr_to_btf_id fixed, from Kumar.

10) bpf_ima_file_hash helper, from Roberto.

11) Add "live packet" mode for XDP in BPF_PROG_RUN, from Toke.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (137 commits)
  selftests/bpf: Fix kprobe_multi test.
  Revert "rethook: x86: Add rethook x86 implementation"
  Revert "arm64: rethook: Add arm64 rethook implementation"
  Revert "powerpc: Add rethook support"
  Revert "ARM: rethook: Add rethook arm implementation"
  bpftool: Fix a bug in subskeleton code generation
  bpf: Fix bpf_prog_pack when PMU_SIZE is not defined
  bpf: Fix bpf_prog_pack for multi-node setup
  bpf: Fix warning for cast from restricted gfp_t in verifier
  bpf, arm: Fix various typos in comments
  libbpf: Close fd in bpf_object__reuse_map
  bpftool: Fix print error when show bpf map
  bpf: Fix kprobe_multi return probe backtrace
  Revert "bpf: Add support to inline bpf_get_func_ip helper on x86"
  bpf: Simplify check in btf_parse_hdr()
  selftests/bpf/test_lirc_mode2.sh: Exit with proper code
  bpf: Check for NULL return from bpf_get_btf_vmlinux
  selftests/bpf: Test skipping stacktrace
  bpf: Adjust BPF stack helper functions to accommodate skip > 0
  bpf: Select proper size for bpf_prog_pack
  ...
====================

Link: https://lore.kernel.org/r/20220322050159.5507-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-22 11:18:49 -07:00
Linus Torvalds 14705fda8f New features:
- NFSv3 support in NFSD is now always built
 - Added NFSD support for the NFSv4 birth-time file attribute
 - Added support for storing and displaying sockaddrs in trace points
 - NFSD now recognizes RPC_AUTH_TLS probes
 
 Performance improvements:
 - Optimized the svc transport enqueuing mechanism
 - Added micro-optimizations for the duplicate reply cache
 
 Notable bug fixes:
 - Allocation of the NFSD file cache hash table is more reliable
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEKLLlsBKG3yQ88j7+M2qzM29mf5cFAmI3XNkACgkQM2qzM29m
 f5dNERAAqJ/nzfVp2H5BKLszJ7p/s13wFqbW719Rzymzl6/tUUHOqIsVdBsJsa/b
 BdZQLLDwa6ZB5zOAnC6FosRKYu4lwixOOf94pC6a9ZDD/glYVKF8mZG+RZXPAy16
 g3JUOi/bcyHXv0ZUhbv7DqW+HHM+owPP4vlNJ9ChiiLr/Xdp8NBKj+4Qtn/wcAo+
 Xuvx7fU/5Mbemh+dd5mWker4afHvpt9V6U6s04m5LiTPPnHVnxmeyekJGUCOY0QO
 cm/6SPNDqyn/VEfM/SRxEnLE9QcHRhZo/4PKRGF4wYolcviIogbILE1M7Ig/r/Gv
 6Du2kcRAhyZ3zgWnu799Ivn3Q6IrVjxZwqmsi7YHURTwYKyZtxYsUk0MCBcpnxrE
 WyTS2onpElbMop3viKCnQdpIetbsHnUNg3udUV6ugbdCbnZuhUw5B/d6x0o8ZWDE
 C0f+jnX+GnBstn0vkcj2H0+VQTd5hUJtXMrooI42ODJoboQRZcmePwoXjqCmw3sy
 PXTxLZC/5+4zNHGUuz4Pq4V7FKr4nHhDzaW4ZDO3mILx4ahceotulY1B/yoBUu8o
 /LAhu2kJ6nFQkmpzdrGzPeOstgJYHm9CaitRvMzg+NJxEAJdebypdQDbX5iNpgfW
 MDXH4n8eIqroTlQ/mQYEV0EbC7BaTqSCL6rQdcrcFUPu9n4Fcno=
 =5nac
 -----END PGP SIGNATURE-----

Merge tag 'nfsd-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux

Pull nfsd updates from Chuck Lever:
 "New features:

   - NFSv3 support in NFSD is now always built

   - Added NFSD support for the NFSv4 birth-time file attribute

   - Added support for storing and displaying sockaddrs in trace points

   - NFSD now recognizes RPC_AUTH_TLS probes

  Performance improvements:

   - Optimized the svc transport enqueuing mechanism

   - Added micro-optimizations for the duplicate reply cache

  Notable bug fixes:

   - Allocation of the NFSD file cache hash table is more reliable"

* tag 'nfsd-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (30 commits)
  nfsd: fix using the correct variable for sizeof()
  nfsd: use correct format characters
  NFSD: prevent integer overflow on 32 bit systems
  NFSD: prevent underflow in nfssvc_decode_writeargs()
  fs/lock: documentation cleanup. Replace inode->i_lock with flc_lock.
  NFSD: Fix nfsd_breaker_owns_lease() return values
  NFSD: Clean up _lm_ operation names
  arch: Remove references to CONFIG_NFSD_V3 in the default configs
  NFSD: Remove CONFIG_NFSD_V3
  nfsd: more robust allocation failure handling in nfsd_file_cache_init
  SUNRPC: Teach server to recognize RPC_AUTH_TLS
  NFSD: Move svc_serv_ops::svo_function into struct svc_serv
  NFSD: Remove svc_serv_ops::svo_module
  SUNRPC: Remove svc_shutdown_net()
  SUNRPC: Rename svc_close_xprt()
  SUNRPC: Rename svc_create_xprt()
  SUNRPC: Remove svo_shutdown method
  SUNRPC: Merge svc_do_enqueue_xprt() into svc_enqueue_xprt()
  SUNRPC: Remove the .svo_enqueue_xprt method
  SUNRPC: Record endpoint information in trace log
  ...
2022-03-22 10:29:51 -07:00
Jiri Olsa f70986902c bpf: Fix kprobe_multi return probe backtrace
Andrii reported that backtraces from kprobe_multi program attached
as return probes are not complete and showing just initial entry [1].

It's caused by changing registers to have original function ip address
as instruction pointer even for return probe, which will screw backtrace
from return probe.

This change keeps registers intact and store original entry ip and
link address on the stack in bpf_kprobe_multi_run_ctx struct, where
bpf_get_func_ip and bpf_get_attach_cookie helpers for kprobe_multi
programs can find it.

[1] https://lore.kernel.org/bpf/CAEf4BzZDDqK24rSKwXNp7XL3ErGD4bZa1M6c_c4EvDSt3jrZcg@mail.gmail.com/T/#m8d1301c0ea0892ddf9dc6fba57a57b8cf11b8c51

Fixes: ca74823c6e ("bpf: Add cookie support to programs attached with kprobe multi link")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220321070113.1449167-3-jolsa@kernel.org
2022-03-21 14:54:15 +01:00
Jiri Olsa f705ec764b Revert "bpf: Add support to inline bpf_get_func_ip helper on x86"
This reverts commit 97ee4d20ee.

Following change is adding more complexity to bpf_get_func_ip
helper for kprobe_multi programs, which can't be inlined easily.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220321070113.1449167-2-jolsa@kernel.org
2022-03-21 14:53:42 +01:00
Steven Rostedt (Google) 795301d3c2 tracing: Have type enum modifications copy the strings
When an enum is used in the visible parts of a trace event that is
exported to user space, the user space applications like perf and
trace-cmd do not have a way to know what the value of the enum is. To
solve this, at boot up (or module load) the printk formats are modified to
replace the enum with their numeric value in the string output.

Array fields of the event are defined by [<nr-elements>] in the type
portion of the format file so that the user space parsers can correctly
parse the array into the appropriate size chunks. But in some trace
events, an enum is used in defining the size of the array, which once
again breaks the parsing of user space tooling.

This was solved the same way as the print formats were, but it modified
the type strings of the trace event. This caused crashes in some
architectures because, as supposed to the print string, is a const string
value. This was not detected on x86, as it appears that const strings are
still writable (at least in boot up), but other architectures this is not
the case, and writing to a const string will cause a kernel fault.

To fix this, use kstrdup() to copy the type before modifying it. If the
trace event is for the core kernel there's no need to free it because the
string will be in use for the life of the machine being on line. For
modules, create a link list to store all the strings being allocated for
modules and when the module is removed, free them.

Link: https://lore.kernel.org/all/yt9dr1706b4i.fsf@linux.ibm.com/
Link: https://lkml.kernel.org/r/20220318153432.3984b871@gandalf.local.home

Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Fixes: b3bc8547d3 ("tracing: Have TRACE_DEFINE_ENUM affect trace event types as well")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-03-20 10:25:13 -04:00
Jiri Olsa ca74823c6e bpf: Add cookie support to programs attached with kprobe multi link
Adding support to call bpf_get_attach_cookie helper from
kprobe programs attached with kprobe multi link.

The cookie is provided by array of u64 values, where each
value is paired with provided function address or symbol
with the same array index.

When cookie array is provided it's sorted together with
addresses (check bpf_kprobe_multi_cookie_swap). This way
we can find cookie based on the address in
bpf_get_attach_cookie helper.

Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220316122419.933957-7-jolsa@kernel.org
2022-03-17 20:17:19 -07:00
Jiri Olsa 97ee4d20ee bpf: Add support to inline bpf_get_func_ip helper on x86
Adding support to inline it on x86, because it's single
load instruction.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220316122419.933957-6-jolsa@kernel.org
2022-03-17 20:17:19 -07:00
Jiri Olsa 42a5712094 bpf: Add bpf_get_func_ip kprobe helper for multi kprobe link
Adding support to call bpf_get_func_ip helper from kprobe
programs attached by multi kprobe link.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220316122419.933957-5-jolsa@kernel.org
2022-03-17 20:17:19 -07:00
Jiri Olsa 0dcac27254 bpf: Add multi kprobe link
Adding new link type BPF_LINK_TYPE_KPROBE_MULTI that attaches kprobe
program through fprobe API.

The fprobe API allows to attach probe on multiple functions at once
very fast, because it works on top of ftrace. On the other hand this
limits the probe point to the function entry or return.

The kprobe program gets the same pt_regs input ctx as when it's attached
through the perf API.

Adding new attach type BPF_TRACE_KPROBE_MULTI that allows attachment
kprobe to multiple function with new link.

User provides array of addresses or symbols with count to attach the
kprobe program to. The new link_create uapi interface looks like:

  struct {
          __u32           flags;
          __u32           cnt;
          __aligned_u64   syms;
          __aligned_u64   addrs;
  } kprobe_multi;

The flags field allows single BPF_TRACE_KPROBE_MULTI bit to create
return multi kprobe.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220316122419.933957-4-jolsa@kernel.org
2022-03-17 20:17:18 -07:00
Masami Hiramatsu ab51e15d53 fprobe: Introduce FPROBE_FL_KPROBE_SHARED flag for fprobe
Introduce FPROBE_FL_KPROBE_SHARED flag for sharing fprobe callback with
kprobes safely from the viewpoint of recursion.

Since the recursion safety of the fprobe (and ftrace) is a bit different
from the kprobes, this may cause an issue if user wants to run the same
code from the fprobe and the kprobes.

The kprobes has per-cpu 'current_kprobe' variable which protects the
kprobe handler from recursion in any case. On the other hand, the fprobe
uses only ftrace_test_recursion_trylock(), which will allow interrupt
context calls another (or same) fprobe during the fprobe user handler is
running.

This is not a matter in cases if the common callback shared among the
kprobes and the fprobe has its own recursion detection, or it can handle
the recursion in the different contexts (normal/interrupt/NMI.)
But if it relies on the 'current_kprobe' recursion lock, it has to check
kprobe_running() and use kprobe_busy_*() APIs.

Fprobe has FPROBE_FL_KPROBE_SHARED flag to do this. If your common callback
code will be shared with kprobes, please set FPROBE_FL_KPROBE_SHARED
*before* registering the fprobe, like;

 fprobe.flags = FPROBE_FL_KPROBE_SHARED;

 register_fprobe(&fprobe, "func*", NULL);

This will protect your common callback from the nested call.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/164735293127.1084943.15687374237275817599.stgit@devnote2
2022-03-17 20:17:02 -07:00
Masami Hiramatsu 5b0ab78998 fprobe: Add exit_handler support
Add exit_handler to fprobe. fprobe + rethook allows us to hook the kernel
function return. The rethook will be enabled only if the
fprobe::exit_handler is set.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/164735290790.1084943.10601965782208052202.stgit@devnote2
2022-03-17 20:16:52 -07:00
Masami Hiramatsu 54ecbe6f1e rethook: Add a generic return hook
Add a return hook framework which hooks the function return. Most of the
logic came from the kretprobe, but this is independent from kretprobe.

Note that this is expected to be used with other function entry hooking
feature, like ftrace, fprobe, adn kprobes. Eventually this will replace
the kretprobe (e.g. kprobe + rethook = kretprobe), but at this moment,
this is just an additional hook.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/164735285066.1084943.9259661137330166643.stgit@devnote2
2022-03-17 20:16:29 -07:00
Masami Hiramatsu cad9931f64 fprobe: Add ftrace based probe APIs
The fprobe is a wrapper API for ftrace function tracer.
Unlike kprobes, this probes only supports the function entry, but this
can probe multiple functions by one fprobe. The usage is similar, user
will set their callback to fprobe::entry_handler and call
register_fprobe*() with probed functions.
There are 3 registration interfaces,

 - register_fprobe() takes filtering patterns of the functin names.
 - register_fprobe_ips() takes an array of ftrace-location addresses.
 - register_fprobe_syms() takes an array of function names.

The registered fprobes can be unregistered with unregister_fprobe().
e.g.

struct fprobe fp = { .entry_handler = user_handler };
const char *targets[] = { "func1", "func2", "func3"};
...

ret = register_fprobe_syms(&fp, targets, ARRAY_SIZE(targets));

...

unregister_fprobe(&fp);

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/164735283857.1084943.1154436951479395551.stgit@devnote2
2022-03-17 20:16:15 -07:00
Jiri Olsa 4f554e9556 ftrace: Add ftrace_set_filter_ips function
Adding ftrace_set_filter_ips function to be able to set filter on
multiple ip addresses at once.

With the kprobe multi attach interface we have cases where we need to
initialize ftrace_ops object with thousands of functions, so having
single function diving into ftrace_hash_move_and_update_ops with
ftrace_lock is faster.

The functions ips are passed as unsigned long array with count.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/164735282673.1084943.18310504594134769804.stgit@devnote2
2022-03-17 20:15:17 -07:00
Jakub Kicinski e243f39685 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
No conflicts.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17 13:56:58 -07:00
Beau Belgrave 089331d473 user_events: Add trace event call as root for low permission cases
Tracefs by default is locked down heavily. System operators can open up
some files, such as user_events to a broader set of users. These users
do not have access within tracefs beyond just the user_event files. Due
to this restriction the trace_add_event_call/remove calls will silently
fail since the caller does not have permissions to create directories.

To fix this trace_add_event_call/remove calls will be issued with
override creds of the global root UID. Creds are reverted immediately
afterward.

Link: https://lkml.kernel.org/r/20220308222807.2040-1-beaub@linux.microsoft.com

Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-03-15 14:33:20 -04:00
Peter Zijlstra aebfd12521 x86/ibt,ftrace: Search for __fentry__ location
Currently a lot of ftrace code assumes __fentry__ is at sym+0. However
with Intel IBT enabled the first instruction of a function will most
likely be ENDBR.

Change ftrace_location() to not only return the __fentry__ location
when called for the __fentry__ location, but also when called for the
sym+0 location.

Then audit/update all callsites of this function to consistently use
these new semantics.

Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154318.227581603@infradead.org
2022-03-15 10:32:37 +01:00
Ingo Molnar ccdbf33c23 Linux 5.17-rc8
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmIuUskeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGCFkH/2n3mpGXuITp0ZXE
 TNrpbdZOof5SgLw+w7THswXuo6m5yRGNKQs9fvIvDD8Vf7/OdQQfPOmF1cIE5+nk
 wcz6aHKbdrok8Jql2qjJqWXZ5xbGj6qywg3zZrwOUsCKFP5p+AjBJcmZOsvQHjSp
 ASODy1moOlK+nO52TrMaJw74a8xQPmQiNa+T2P+FedEYjlcRH/c7hLJ7GEnL6+cC
 /R4bATZq3tiInbTBlkC0hR0iVNgRXwXNyv9PEXrYYYHnekh8G1mgSNf06iejLcsG
 aAYsW9NyPxu8zPhhHNx79K9o8BMtxGD4YQpsfdfIEnf9Q3euqAKe2evRWqHHlDms
 RuSCtsc=
 =M9Nc
 -----END PGP SIGNATURE-----

Merge tag 'v5.17-rc8' into sched/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2022-03-15 10:28:12 +01:00
Steven Rostedt (Google) bc47ee4844 tracing/user_events: Use alloc_pages instead of kzalloc() for register pages
kzalloc virtual addresses do not work with SetPageReserved, use the actual
page virtual addresses instead via alloc_pages.

The issue is reported when booting with user_events and
DEBUG_VM_PGFLAGS=y.

Also make the number of events based on the ORDER.

Link: https://lore.kernel.org/all/CADYN=9+xY5Vku3Ws5E9S60SM5dCFfeGeRBkmDFbcxX0ZMoFing@mail.gmail.com/
Link: https://lore.kernel.org/all/20220311223028.1865-1-beaub@linux.microsoft.com/

Cc: Beau Belgrave <beaub@linux.microsoft.com>
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-03-11 18:59:57 -05:00
Steven Rostedt (Google) 380af29b8d tracing: Add snapshot at end of kernel boot up
Add ftrace_boot_snapshot kernel parameter that will take a snapshot at the
end of boot up just before switching over to user space (it happens during
the kernel freeing of init memory).

This is useful when there's interesting data that can be collected from
kernel start up, but gets overridden by user space start up code. With
this option, the ring buffer content from the boot up traces gets saved in
the snapshot at the end of boot up. This trace can be read from:

 /sys/kernel/tracing/snapshot

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-03-11 11:49:24 -05:00
Steven Rostedt (Google) b3bc8547d3 tracing: Have TRACE_DEFINE_ENUM affect trace event types as well
The macro TRACE_DEFINE_ENUM is used to convert enums in the kernel to
their actual value when they are exported to user space via the trace
event format file.

Currently only the enums in the "print fmt" (TP_printk in the TRACE_EVENT
macro) have the enums converted. But the enums can be used to denote array
size:

        field:unsigned int fc_ineligible_rc[EXT4_FC_REASON_MAX]; offset:12;      size:36;        signed:0;

The EXT4_FC_REASON_MAX has no meaning to userspace but it needs to know
that information to know how to parse the array.

Have the array indexes also be parsed as well.

Link: https://lore.kernel.org/all/cover.1646922487.git.riteshh@linux.ibm.com/

Reported-by: Ritesh Harjani <riteshh@linux.ibm.com>
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-03-11 11:49:24 -05:00
Tom Zanussi 9f438d4d7f tracing: Fix strncpy warning in trace_events_synth.c
0-day reported the strncpy error below:

../kernel/trace/trace_events_synth.c: In function 'last_cmd_set':
../kernel/trace/trace_events_synth.c:65:9: warning: 'strncpy' specified bound depends on the length o\
f the source argument [-Wstringop-truncation]
   65 |         strncpy(last_cmd, str, strlen(str) + 1);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../kernel/trace/trace_events_synth.c:65:32: note: length computed here
   65 |         strncpy(last_cmd, str, strlen(str) + 1);
      |                                ^~~~~~~~~~~

There's no reason to use strncpy here, in fact there's no reason to do
anything but a simple kstrdup() (note we don't even need to check for
failure since last_cmod is expected to be either the last cmd string
or NULL, and the containing function is a void return).

Link: https://lkml.kernel.org/r/77deca8cbfd226981b3f1eab203967381e9b5bd9.camel@kernel.org

Fixes: 27c888da98 ("tracing: Remove size restriction on synthetic event cmd error logging")

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-03-11 11:49:24 -05:00
Beau Belgrave 7e348b325b user_events: Prevent dyn_event delete racing with ioctl add/delete
Find user_events always while under the event_mutex and before leaving
the lock, add a ref count to the user_event. This ensures that all paths
under the event_mutex that check the ref counts will be synchronized.

The ioctl add/delete paths are protected by the reg_mutex. However,
dyn_event is only protected by the event_mutex. The dyn_event delete
path cannot acquire reg_mutex, since that could cause a deadlock between
the ioctl delete case acquiring event_mutex after acquiring the reg_mutex.

Link: https://lkml.kernel.org/r/20220310001141.1660-1-beaub@linux.microsoft.com

Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-03-11 11:49:24 -05:00
Linus Torvalds dda64ead7e Minor tracing fixes:
- Fix unregistering the same event twice a the user could disable
    the event osnoise will disable on unregistering.
 
  - Inform RCU of a quiescent state in the osnoise testing thread.
 
  - Fix some kerneldoc comments.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYioe0BQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qohMAQCcnN4Iy9LcKX02A5HcuUxIdH3ktOqt
 lbc24+nb6AO+/wD+Ilnlx/Ir09HgaL7NreSAc0tvLMwRgaM+grLA82IRTwc=
 =quYh
 -----END PGP SIGNATURE-----

Merge tag 'trace-v5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "Minor tracing fixes:

   - Fix unregistering the same event twice. A user could disable the
     same event that osnoise will disable on unregistering.

   - Inform RCU of a quiescent state in the osnoise testing thread.

   - Fix some kerneldoc comments"

* tag 'trace-v5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Fix some W=1 warnings in kernel doc comments
  tracing/osnoise: Force quiescent states while tracing
  tracing/osnoise: Do not unregister events twice
2022-03-10 17:23:08 -08:00
Jakub Kicinski 1e8a3f0d2a Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
net/dsa/dsa2.c
  commit afb3cc1a39 ("net: dsa: unlock the rtnl_mutex when dsa_master_setup() fails")
  commit e83d565378 ("net: dsa: replay master state events in dsa_tree_{setup,teardown}_master")
https://lore.kernel.org/all/20220307101436.7ae87da0@canb.auug.org.au/

drivers/net/ethernet/intel/ice/ice.h
  commit 97b0129146 ("ice: Fix error with handling of bonding MTU")
  commit 43113ff734 ("ice: add TTY for GNSS module for E810T device")
https://lore.kernel.org/all/20220310112843.3233bcf1@canb.auug.org.au/

drivers/staging/gdm724x/gdm_lte.c
  commit fc7f750dc9 ("staging: gdm724x: fix use after free in gdm_lte_rx()")
  commit 4bcc4249b4 ("staging: Use netif_rx().")
https://lore.kernel.org/all/20220308111043.1018a59d@canb.auug.org.au/

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10 17:16:56 -08:00
Steven Rostedt (Google) 8bcd06632b tracing: Allow custom events to be added to the tracefs directory
Allow custom events to be added to the events directory in the tracefs
file system. For example, a module could be installed that attaches to an
event and wants to be enabled and disabled via the tracefs file system. It
would use trace_add_event_call() to add the event to the tracefs
directory, and trace_remove_event_call() to remove it.

Make both those functions EXPORT_SYMBOL_GPL().

Link: https://lkml.kernel.org/r/20220303220625.186988045@goodmis.org

Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-03-10 17:41:18 -05:00
Steven Rostedt (Google) 5677a3d713 tracing: Fix last_cmd_set() string management in histogram code
Using strnlen(dest, str, n) is confusing, as the size of dest must be
strlen(dest) + n + 1. Even more confusing, using sizeof(string constant)
gives you strlen(string constant) + 1 and not just strlen().

These two together made using strncat() with a constant string a bit off
in the calculations as we have:

	len = sizeof(HIST_PREFIX) + strlen(str) + 1;
	kfree(last_cmd);
	last_cmd = kzalloc(len, GFP_KERNEL);
	strcpy(last_cmd, HIST_PREFIX);
	len -= sizeof(HIST_PREFIX) + 1;
	strncat(last_cmd, str, len);

The above works if we s/sizeof/strlen/ with HIST_PREFIX (which is defined
as "hist:", but because sizeof(HIST_PREFIX) is equal to
strlen(HIST_PREFIX) + 1, we can drop the +1 in the code. But at least
comment that we are doing so.

Link: https://lore.kernel.org/all/202203082112.Iu7tvFl4-lkp@intel.com/

Fixes: 9f8e5aee93 ("tracing: Fix allocation of last_cmd in last_cmd_set()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-03-10 17:41:18 -05:00
Beau Belgrave 173c2049d1 user_events: Fix potential uninitialized pointer while parsing field
Ensure name is initialized by default to NULL to prevent possible edge
cases that could lead to it being left uninitialized. Add an explicit
check for NULL name to ensure edge boundaries.

Link: https://lore.kernel.org/bpf/20220224105334.GA2248@kili/
Link: https://lore.kernel.org/linux-trace-devel/20220224181637.2129-1-beaub@linux.microsoft.com

Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-03-10 17:41:18 -05:00
Jiapeng Chong 78cbc65132 ftrace: Fix some W=1 warnings in kernel doc comments
Clean up the following clang-w1 warning:

kernel/trace/ftrace.c:7827: warning: Function parameter or member 'ops'
not described in 'unregister_ftrace_function'.

kernel/trace/ftrace.c:7805: warning: Function parameter or member 'ops'
not described in 'register_ftrace_function'.

Link: https://lkml.kernel.org/r/20220307004303.26399-1-jiapeng.chong@linux.alibaba.com

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-03-09 11:52:21 -05:00