Commit Graph

46 Commits

Author SHA1 Message Date
Atsushi Nemoto 1bd0962e3d [MIPS] jmr3927: use generic txx9 gpio
Use generic txx9 gpio (and gpiolib) for JMR3927 board.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-28 17:14:31 +01:00
Atsushi Nemoto 2064ba23e5 [MIPS] TXx9 watchdog support for rbhma3100,rbhma4200,rbhma4500
This patch adds support for txx9wdt driver to rbhma3100, rbhma4200 and
rbhma4500 platform.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29 10:14:58 +00:00
Yoichi Yuasa 7f3f490061 [MIPS] remove unused mips_machtype
Removed unused mips_machtype.  These are only set but not used.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29 10:14:55 +00:00
Atsushi Nemoto 8b6c2324bf [MIPS] cleanup tx39/tx49 setup code
Remove some unnecessary codes, includes and files.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29 10:14:55 +00:00
Atsushi Nemoto 229f773ef4 [MIPS] txx9tmr clockevent/clocksource driver
Convert jmr3927_clock_event_device to more generic
txx9tmr_clock_event_device which supports one-shot mode.  The
txx9tmr_clock_event_device can be used for TX49 too if the cp0 timer
interrupt was not available.

Convert jmr3927_hpt_read to txx9_clocksource driver which does not
depends jiffies anymore.  The txx9_clocksource itself can be used for
TX49, but normally TX49 uses higher precision clocksource_mips.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-29 19:35:35 +00:00
Ralf Baechle 832348ff0b [MIPS] JMR3927: Convert to clock_event_device.
This separate the tick timer stuff from the generic MIPS time.c.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-18 18:11:46 +01:00
Atsushi Nemoto a95e23a27b rtc: make rtc-ds1742 driver hotplug-aware
The rtc-ds1742 platform driver name doesn't match its module name,
which might prevents it from properly hotplugging.  There is only two
in-tree user of its driver, which are fixed by this patch too.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:13 -07:00
Ralf Baechle 4b550488f8 [MIPS] Deforest the function pointer jungle in the time code.
Hard to follow who is pointing what to where and why so it's simply getting
in the way of the time code renovation.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11 23:46:08 +01:00
Ralf Baechle 05dc8c02bf [MIPS] ARC: Get rid of mips_machgroup
This has not been any serious user of this ill conceived thing since the
original invention in like '95.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11 23:46:08 +01:00
Thomas Gleixner 4e45171c4e [MIPS] cleanup struct irqaction initializers
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
CC: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11 23:46:02 +01:00
Atsushi Nemoto c87abd75b3 [MIPS] Cleanup TX39/TX49 irq code
Cleanup jmr3927, tx4927 and tx4938 irq codes, using common IRQ_CPU,
I8259 and IRQ_TXX9 irq routines.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-08-27 02:16:53 +01:00
Ralf Baechle dde96ca8b3 [MIPS] Use -Werror on subdirectories which build cleanly.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-31 21:35:33 +01:00
Atsushi Nemoto 4614c32645 [MIPS] Make resources for ds1742 "static __initdata"
We can make resources for platform_device_register_simple() "static
__initdata".

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-24 16:02:47 +01:00
Yoann Padioleau f834368564 parse errors in ifdefs
Fix various bits of obviously-busted code which we're not happening to
compile, due to ifdefs.

Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Jan Kara <jack@ucw.cz>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-01 08:18:28 -07:00
Atsushi Nemoto 2127435e57 [MIPS] JMR3927 cleanup
* Kill dead codes
* Rearrange irq chip handlers
* Minimize defconfig

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-04-27 16:20:23 +01:00
Atsushi Nemoto a0574e0480 [MIPS] Convert to RTC-class ds1742 driver
The generic rtc-ds1742 driver can be used for RBTX4927 and JMR3927
(with __swizzle_addr trick).  This patch also removes MIPS local
DS1742 stuff.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-04 19:02:34 +00:00
Ralf Baechle c8d64f8a05 jmr3927: do not call tc35815_killall().
No need to stop tc35815 before resetting the board.  This fixes the
build of tc35815 as a module.  This also means there is no caller of
tc35815_killall left, so remove that function also.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02 19:55:07 -05:00
Atsushi Nemoto d2af363cfb [MIPS] Kill redundant EXTRA_AFLAGS
Many Makefiles in arch/mips have EXTRA_AFLAGS := $(CFLAGS) line.  This
is redundant while AFLAGS contains $(cflags-y) and any options only
listed in CFLAGS (not in cflags-y) should be unnecessary for asm
sources.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-26 23:06:05 +00:00
Ahmed S. Darwish 25b8ac3ba4 [MIPS] Use ARRAY_SIZE macro when appropriate
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-06 16:53:19 +00:00
Atsushi Nemoto 70d21cdeef [MIPS] use name instead of typename for each irq_chip
The "typename" field was obsoleted by the "name" field.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-06 16:53:14 +00:00
Atsushi Nemoto c44e8d5e47 [MIPS] prom_free_prom_memory cleanup
Current prom_free_prom_memory() implementations are almost same as
free_init_pages(), or no-op.  Make free_init_pages() extern (again)
and make prom_free_prom_memory() use it.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-06 16:53:09 +00:00
Atsushi Nemoto 005985609f [MIPS] mips HPT cleanup: make clocksource_mips public
Make clocksource_mips public and get rid of mips_hpt_read,
mips_hpt_mask.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-30 01:14:49 +00:00
Atsushi Nemoto 1603b5aca4 [MIPS] IRQ cleanups
This is a big irq cleanup patch.

* Use set_irq_chip() to register irq_chip.
* Initialize .mask, .unmask, .mask_ack field.  Functions for these
  method are already exist in most case.
* Do not initialize .startup, .shutdown, .enable, .disable fields if
  default routines provided by irq_chip_set_defaults() were suitable.
* Remove redundant irq_desc initializations.
* Remove unnecessary local_irq_save/local_irq_restore, spin_lock.

With this cleanup, it would be easy to switch to slightly lightwait
irq flow handlers (handle_level_irq(), etc.) instead of __do_IRQ().

Though whole this patch is quite large, changes in each irq_chip are
not quite simple.  Please review and test on your platform.  Thanks.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-30 01:14:46 +00:00
Atsushi Nemoto 16b7b2ac01 [MIPS] Fixup migration to GENERIC_TIME
Since we already moved to GENERIC_TIME, we should implement alternatives
of old do_gettimeoffset routines to get sub-jiffies resolution from
gettimeofday().  This patch includes:

 * MIPS clocksource support (based on works by Manish Lachwani).
 * remove unused gettimeoffset routines and related codes.
 * remove unised 64bit do_div64_32().
 * simplify mips_hpt_init. (no argument needed, __init tag)
 * simplify c0_hpt_timer_init. (no need to write to c0_count)
 * remove some hpt_init routines.
 * mips_hpt_mask variable to specify bitmask of hpt value.
 * convert jmr3927_do_gettimeoffset to jmr3927_hpt_read.
 * convert ip27_do_gettimeoffset to ip27_hpt_read.
 * convert bcm1480_do_gettimeoffset to bcm1480_hpt_read.
 * simplify sb1250 hpt functions. (no need to subtract and shift)
    
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-31 20:13:23 +00:00
Ralf Baechle e523318457 [MIPS] JMR3927: Fixup another victim of the irq pt_regs cleanup.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-30 21:41:31 +00:00
Ralf Baechle 937a801576 [MIPS] Complete fixes after removal of pt_regs argument to int handlers.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-08 02:38:28 +01:00
Ralf Baechle 54d0a216f4 [MIPS] Replace board_timer_setup function pointer by plat_timer_setup.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

---
2006-07-13 21:26:17 +01:00
Ralf Baechle 046f8f705b [MIPS] Remove redeclarations of setup_irq().
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-13 21:26:16 +01:00
Ralf Baechle 94dee171df [MIPS] Eleminate interrupt migration helper use.
> #define hw_interrupt_type       irq_chip
> typedef struct irq_chip         hw_irq_controller;
> #define no_irq_type             no_irq_chip
> typedef struct irq_desc         irq_desc_t;

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-13 21:25:58 +01:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Ingo Molnar d1bef4ed5f [PATCH] genirq: rename desc->handler to desc->chip
This patch-queue improves the generic IRQ layer to be truly generic, by adding
various abstractions and features to it, without impacting existing
functionality.

While the queue can be best described as "fix and improve everything in the
generic IRQ layer that we could think of", and thus it consists of many
smaller features and lots of cleanups, the one feature that stands out most is
the new 'irq chip' abstraction.

The irq-chip abstraction is about describing and coding and IRQ controller
driver by mapping its raw hardware capabilities [and quirks, if needed] in a
straightforward way, without having to think about "IRQ flow"
(level/edge/etc.) type of details.

This stands in contrast with the current 'irq-type' model of genirq
architectures, which 'mixes' raw hardware capabilities with 'flow' details.
The patchset supports both types of irq controller designs at once, and
converts i386 and x86_64 to the new irq-chip design.

As a bonus side-effect of the irq-chip approach, chained interrupt controllers
(master/slave PIC constructs, etc.) are now supported by design as well.

The end result of this patchset intends to be simpler architecture-level code
and more consolidation between architectures.

We reused many bits of code and many concepts from Russell King's ARM IRQ
layer, the merging of which was one of the motivations for this patchset.

This patch:

rename desc->handler to desc->chip.

Originally i did not want to do this, because it's a big patch.  But having
both "desc->handler", "desc->handle_irq" and "action->handler" caused a
large degree of confusion and made the code appear alot less clean than it
truly is.

I have also attempted a dual approach as well by introducing a
desc->chip alias - but that just wasnt robust enough and broke
frequently.

So lets get over with this quickly.  The conversion was done automatically
via scripts and converts all the code in the kernel.

This renaming patch is the first one amongst the patches, so that the
remaining patches can stay flexible and can be merged and split up
without having some big monolithic patch act as a merge barrier.

[akpm@osdl.org: build fix]
[akpm@osdl.org: another build fix]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29 10:26:21 -07:00
Ralf Baechle 2925aba422 [MIPS] Cleanup memory managment initialization.
Historically plat_mem_setup did the entire platform initialization.  This
was rather impractical because it meant plat_mem_setup had to get away
without any kind of memory allocator.  To keep old code from breaking
plat_setup was just renamed to plat_setup and a second platform
initialization hook for anything else was introduced.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19 17:39:23 +01:00
Ralf Baechle 5e46c3aefe [MIPS] C99-ify struct resource initialization.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19 17:39:20 +01:00
Ralf Baechle e4ac58afdf [MIPS] Rewrite all the assembler interrupt handlers to C.
Saves like 1,600 lines of code, is way easier to debug, compilers
frequently do a better job than the cut and paste type of handlers many
boards had.  And finally having all the stuff done in a single place
also means alot of bug potencial for the MT ASE is gone.

The only surviving handler in assembler is the DECstation one; I hope
Maciej will rewrite it.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-04-19 04:14:21 +02:00
Ralf Baechle ba8990f2ae [MIPS] JMR3927 build fixes for the RTC code.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-04-19 04:14:20 +02:00
Yoichi Yuasa d23ee8fe6e [PATCH] mips: fixed collision of rtc function name
Fix the collision of rtc function name.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 08:44:50 -08:00
Ralf Baechle fcdb27ad1d [MIPS] Rename _machine_power_off to pm_power_off so the kernel builds again.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07 13:30:22 +00:00
Ralf Baechle 380b92537c [MIPS] JMR3927: Declare puts function.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-12-01 11:05:11 +00:00
Sergei Shtylylov 702a96a62b [MIPS] JMR3927 fixes.
o Check if IRQ is disabled or in progress before reenabling interrupts
   in jmr3927_irq_end..
 o s/spinlock_irqsave/spin_lock_irqsave/
 o s/spinlock_irqrestore/spin_unlock_irqrestore/
 o Flush write buffer after setting IRQ mask
 o In 2.6 jmr3927_ioc_interrupt interrupt handlers return irqreturn_t
    
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-12-01 11:05:10 +00:00
Ralf Baechle c32cf78c02 [MIPS] JMR3927: Fix compilation by including <linux/ds1742rtc.h>.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-11-17 16:23:53 +00:00
Ralf Baechle efd9412d85 [MIPS] JMR3927: Undo accidental rename.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-11-17 16:23:45 +00:00
Atsushi Nemoto 53c2df2f4e Use rtc_lock to protect RTC operations
Many RTC routines were not protected against each other, so there are
potential races, for example, ntp-update against /dev/rtc.  This patch
fixes them using rtc_lock.
    
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-11-07 18:05:38 +00:00
Ralf Baechle 5eaf7a21be Use new txx9 serial driver.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:30:52 +01:00
Ralf Baechle 8ab00b9a02 Convert struct hw_interrupt_type initializations to ISO C99 named
initializers.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:30:46 +01:00
Ralf Baechle c83cfc9c94 Get rid of early_init. There's more need to make this form of
initialization actually useful and as is certainly unmergable with
upstream.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:30:18 +01:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00